Followspot 1200 HMI , cañon hmi 1200
Contents
1. LIGHTING We thank you for choosing the projector FOLLOWSPOT 1200 HMI To make the most of this unit and to make it work correctly in the years before connecting it to its source and using it we suggest you to carefully read this manual In this way you will be more familiar with it and its connections and will be easier to use it All the sections of this manual have been studied to make as easy and complete as possible the use of the FOLLOWSPOT 1200 HMI To make the manual more clear and easy to consult we have used the following symbols and conventions AN IMPORTANT very important warnings to be read with the maximum attention l important parts of the text that give details and or explanations on the use of the FOLLOWSPOT 1200 HMI D practical advices for an efficient use of the FOLLOWSPOT 1200 HMI YOUR REFERENCE Cite the model and the serial number anytime you contact your retailer to ask for information or assistance STANDARD PACKAGE The standard package of the projector FOLLOWSPOT 1200 HMI contains 1 Projector ON REQUEST 2 Ballast 1200W Lamp code 060279 3 Colours changer Gobo holder 53mm code 040107 4 4 profile blades Stand code 083540 5 Iris 55mm Flight case with wheels code 194982 6 User s manual 7 Guarantee AN IMPORTANT Make sure that the unit has not been damaged during the transportation In case it has happened or in case the unit does not work correctly immediately c2. SLOT SIDE ON OFF fig 4 a SWITCH i 7 HANDLE LES po FEED BOX a TYPE THIN SCREW DRIVER vat a Societ Weight a HANDLE Sarlal Ho ILME SOCKET FUSE PHASE Brown NEUTRAL Blue EARTH Green Yellow PLUG e AN IMPORTANT The unit must be connected to the earth The inobservance of these instructions automatically makes the guarantee expiring Before connecting the unit to the mains make sure that the working voltage and frequency correspond to the values indicated on the label fig 4 The FOLLOWSPOT 1200 HMI is made to work at a working voltage of 230V 50Hz 10 A Connect the projector to the power supply through the feed box placed on the ballast fig 4 For the power supply connection do as follows 1 open the feed box using a thin screw driver and gently force the two lateral little tongues fig 4 a 2 the connections from the unit to the power supply source are described in fig 4 a 3 close the feed box pressing on its cover 4 at the end connect the plug of the projector to the ILME socket of the ballast fig 4 a a he plug of the projector must be used only for the connection to the ballast Any other use could damage the lamp To start on the projector there is a green switch ON OFF fig 4 FOLLOWSPOT 1200 HMI CODE 991223 LE LIGHTING FITTING AND REPLA CING THE LAMP AN IMPORTANT In case of replacement of the Lamp or maintenance never open the unit unless a
3. guide eyes Pull the safety spring at the front of the colours changer system fig 6 and precisely connect the 4 guide eyes to the 4 support connections leave free the safety spring making sure that the colours changer system is well stable The colours changer system is able to be equipped with No 5 coloured filters gelatine To insert the gelatines do as follows D 1 unfasten the three screws of the filter holder fig 6 A5 It is recommended to use SE only filters with an high temperature resistance 2 insert the gelatine 3 fasten the three screws ZOOM AND FOCUS To regulate the zoom and focus use the two knobs fig 6 placed on the right side of the projector The light beam amplitude can be regulated from a minimum of 8 to a maximum of 17 fig 2 PROFILE SYSTEM AND BLACK OUT The FOLLOWSPOT 1200 HMI is provided with a profile system of 4 profile blades Insert the profile blades fig 3 in their appropriate side slots fig 6 to cut the beam to the required shape In the upper part of the projector has been made an appropriate room with a track to insert the Iris and the Gobo holder fig 6 available on request ref to standard package and fig 3 a The FOLLOWSPOT 1200 HMI is provided with the black out function It is possible to cut out the entire light beam using the lever placed at the right side of the projector fig 6 Profile blades Iris CONNECTION TO THE POWER SUPPLY fig 3
4. erating any maintenance disconnect the mains In case the fan does not correctly work the FOLLOWSPOT 1200 HMI is equipped with a thermic protector to avoid any unpleasant inconvenient happening For operating a correct maintenance of the FOLLOWSPOT 1200 HMI follow these instructions 1 periodically clean the in out air grates 2 make sure the fan is correctly working 3 periodically clean the lenses and the reflecting parabole fig 5 using antistatic cloths and products e Do not absolutely use solvents or abrasive products COLOURS CHANGER SAPETE SPRING pak IRISOR SUPPORTS g9 GOBO HOLDER HANDLE PROFILE BLADE COLOURS CHANGER SYSTEM LAMP ACCESS HATCH KNOBS SCREWS HANDLE ZOOM AND FOCUS KNOBS BLACK OUT LEVER PROFILE BLADE FILTERS HOLDER Rev 12 2005 Working to make its products always more perfect LED reserves the possibility to make technical changes during the production The technical features and the drawings on this manual are not binding for LED and they could be changed at any time without notice LED it is not responsible for any inconven ience caused by an improper or different use of the unit respect to the one for what it has been made
5. ontact the Retailer If the unit has been directly sent to you immediately contact the Freight Company Only the final receiver the person or the Company that receive the unit is in the position to complain for the above inconveniences The safety of the unit is guaranteed only strictly following the instructions so it is recommended to accurately preserve them User s manual product code 991223 TECHNICAL FEATURES Discharge lamp HMI 1200 W GS OSRAM fig 1 LAMP Colour temperature 5 600 K Average lamp life 750 ore VERTICAL 45 45 MOVEMENT Manual orientation fig 1 LIGHT BEAM 8 17 fig 2 Tee oS AMPLITUDE MANUAL e ORIENTATION a aa COLOURS CHANGER 5 colours white manual KNOBS 320 mm BLACK OUT Manual m BRACKET LIGHT BEAM PROFILE SYSTEM 4 independent profile blades eon Manual profiling SCREWS 230 mm Manual e Nominal operating voltage 230 Vac 50 Hz INPUT POWER e Rated power supply 1240 W LIGHT BEAM AMPLITUDE RELATED TO DISTANCES e Nominal current 10 A 230 Vac WORKING On a stand g a POSITION DIMENSIONS Projector mm 320 x 1170 x 380 fig 1 fig 2 WxDxH Ballast mm 240 x 330 x 230 fig 1 a Projector Kg 23 EE nL Ballast Kg 17 BODY Steel and aluminium Distance in mt Do not dismantle and modify the unit apnyjdwy Do not install the unit outdoors directly exposed to rain or moisture To avoid any inflammable liquids water o
6. r metal objects entering the unit To avoid installing the unit close to heat sources Never to lean the connecting cable on the hot unit Replace the fuses with others of the same kind and value 5x20 250V 10A fig 4 The unit must be at a minimum distance of 50 cm from the walls or from any inflammable material and 3 mt from lighted objects The unit must be placed where it could be easily aerated To avoid obstructing the in out air gratings Do not directly look at the Lamp when it Is on Before installing the FOLLOWSPOT 1200 HMI make sure that the carrying structure is safe and able to support the weight of the unit The FOLLOWSPOT 1200 HMI is equipped with a bracket with a middle eye diam 12 mm to place it on stand fig 1 To orientate the unit follow these instructions 1 Unscrew the Manual Orientation Knobs on the side of the unit fig 1 2 Orientate the projector as you want using its proper handles fig 4 and 6 3 Screw the Manual Orientation Knobs At the end of the assembling operations make sure that the unit has been correctly and safely fixed FOLLOWSPOT 1200 HMI CODE 991223 Ls LIGHTING COLOURS CHANGER SYSTEM ASSEMBLING The FOLLOWSPOT 1200 HMI comes with a colours changer system fig 6 to assamble it do as follows At the front of the projector there are 4 support connections where to mount the colours changer system fig 6 At the back of the colours changer system there are 4
7. re passed at least 15 minutes after it went off 1 Disconnect the unit before replacing the Lamp Always wear protective gloves and goggles 2 Unfasten the two knobs placed at the top of the projector fig 6 3 Take out the cover 4 Take out the two lateral bushes of the new lamp Avoid touching the new lamp with the nude hands in case it accidentally happens clean the bulb with the proper tissue given with the replacement lamp 5 Unscrew the locking knob of the top lamp holder fig 5 6 Fasten the lamp in its lower lamp holder fig 5 7 Screw the locking knob of the top lamp holder Before mounting the lamp make sure that into the lamp holder there is not anything that may cause interruptions to the thermic and electrical conduction fig 5 LOCKING KNOB 8 Put back the top cover and fasten the two knobs TOP LAMP HOLDER THERMIC To properly adjust the light beam PROTECTOR e use the two adjusting screws placed at the back of the lower suppoRT ie cover of the projector together with a descriptive label OWERLAMP ROLDER Also follow what described in the diagram in fig 1 To avoid any bad performance of the unit or the Lamp breakage damaging the optics of the FOLLOWSPOT 1200 HMI replace the lamp as soon as its maximum average time ends The lenses must be replaced when are evidently damaged and if their efficiency has been reduced for example from slits or deep cuts MAINTENANCE e Before op
Download Pdf Manuals
Related Search