Home

IP 300 USER MANUAL Table of Contents IP PHONE

image

Contents

1. up a Telnet window and connect to IP PHONE There will be a prompt on Telnet window as follows IP PHONE 0 97 settings Password Input password the IP PHONE will request for password If input is correct the Telnet window display as follows Password P gt If above mentioned prompt appeared the IP PHONE is ready for setting mode All parameters can be set by commands of the IP PHONE amp NOTE The IP PHONE s default setting is IP address 192 168 1 100 password 1234 If three times of wrong input happened the IP PHONE will be disconnected Detailed description of the IP PHONE commands List of the IP PHONE commands Command Function Supply command name and parameters get Display basic parameters of the IP PHONE IP 300 User Manual set Setting parameters of the IP PHONE exit Exit from the setting mode but changes not saved write Exit and save all settings and re start the AT 323 Detailed description of the IP PHONE Command Syntax description no optional parameter Usage supply command name and parameters under P gt Also it can be the keyword for command set supplying keyword and parameters of the relevant command Relevant usage none Detailed description List all commands help For example P A gt set get list all settings get adv list advanced settings exit write exit and save the configuration Command get Syntax description no optional parameter of keywo
2. one Review made calls Made Calls Press all number will be played and press where the received resecos Il be played backward one by one Quick dial up 1 Play the saved quick dial up number 33 IP 300 User Manual Press the number key from B hen press Save number appointed number will be played the number is stored at relevant position For example press and then press the phone number preset at position fl 2 Calling with quick dial up number Press the number key from press osea ren you can call G3 Save number the number preset For example press J We oe the number preset at No 22 position will be called NOTE Quick dial phone number range from 0 112 Voice Prompting Under standby status without picking up the handset press IP XXX XXX XXX XXX et mask XXxX xXXX XXX XXX er IP XXX XXX XXX XXX ices provider IP XXX XXX XXX XXX e number xxxxxx NOTE Voice prompting can only be performed under normal mode IP PHONE Upgrade Setting TFTP service TFTP Service can be choiced from ISP and agent consumer can also span TFTP service in 34 IP 300 User Manual LAN Use communal TFTP Service please set IP PHONE TFTP IP If set TFTP IP 0 0 0 0 IP PHONE will find TFTP service from LAN by broadcast Prepare Upgrade flies Please ask for the new upgrade files from agent or manufacturer or download it from ww
3. 1 s 02 106 220 tfo booo Fig 19 TCP IP settings H 323 settings H 323 settings item can set use GK GK IP address With proxy proxy IP 1Q 931porti iRASport 1H 245 porti IRTPporti 1GW IP 1 With fast start IDTMF relayietc See also Fig 20 h 323 settings p proxy ip 9 99 rtp port 1752 4 931 port iT50 ras port i750 245 port 1752 use gk Vv ki M gk 192 168 1 1956 ns id din H245 String v ew f o00 Fig 20 H 323 settings Phone settings proxy 28 IP 300 User Manual Phone settings item can set Phone number iWith dial plan inumber lengthi IDDD code iIDD prefix 1IDD codet 1DDD prefixi Auto answer Ring number With innerline ilocalprefixt inonlocalprefixi etc See also Fig 21 phone settings dial plan LH phone number 1 8 e ddd code idd code eo idd prefix o ddd prefix inner line mi local prefix p nonlocal prefix cdr o cdr ip 0 0 0 max phone number answer 5 ring type handset input fil handset output E mr prepaid o account pin p po speaker output Fig 21 Phone Settings VNOTE Parameter xxxxx taking value scope should be avoided the famous known and within 1024 65535 In order to avoid giving rise to the conflict RTP port number must be even number Fixing after the above parameter clickiUpdate button Write back to the IP PHONE Speed Dial settings Speed dial setti
4. With audio gateway Audio gateway IP address Phone settings With dial plan Phone number CDR IP address Number length With prepaid card Prepaid Card ID Prepaid Card Pin Auto answer mode and Ring number IP 300 User Manual Ring type Handset initial volume Mike initial volume Speaker initial volume Speed dial number settings Speed dial number 000 013 Speed dial number 014 027 Speed dial number 028 041 Speed dial number 042 055 Speed dial number 056 069 Speed dial number 070 083 Speed dial number 084 097 Speed dial number 098 111 Operation Receiving a call Calling with gatekeeper Calling without gatekeeper Calling direct audio gateway Dial up with PPPOE Volume adjustment Review unanswered calls Review received calls Review made calls Review saved phone number in memory Quick dial up Voice prompting UPGRADE SET TFTP service Prepare upgrade Upgrade IP PHONE Summary This manual contains detailed system characteristics of the IP PHONE IP PHONE Characteristics IP 300 User Manual IP PHONE is a net phone terminal used for audio communication via IP network It is suitable for enterprise LAN IP Telephone Services Provider s network and Internet user IP PHONE can transfer the voice to IP packet directly and transmit via network Preset by IP Telephone Services Provider or enterprise LAN administers IP PHONE can be used by the customer terminal plug amp play With suitable n
5. iddcode iddprefix dddprefix innerline XO M localprefix nonlocalprefix cdr 0 1 cdrip maxnumberlen prepaid account pin answer ringtype audioframes audiotype 6 3k handsetin handsetout handsettone speakerin speakerout speakertone vad agc aec Usage Set password and running parameters of the IP PHONE Relevant usage set password set protocol set language set mac set dhcp 0d set debug set pppoe 01 set pppid set ppppin set ip set subnetmask set router set dns set tftp set proxy set proxyip set rtpport set q931port set rasport set h245port set gk 0 set gkid set gkip set localalias set remotealias set faststart 0 1 set h323id set dtmf set gwip set dialplan 011 set phonenumber set dddcode set iddcode set iddprefix set dddprefix set innerline 01 set localprefix set nonlocalprefix set cdr 01 set cdrip set maxnumberlen set prepaid set account set pin set answer set ringtype set audioframes set audiotype set 6 3k set handsetin set handsetout set handsettone set speakerin set speakerout set speakertone set vad set agc set aec Detailed description set password xxxxxxx IP 300 User Manual Set password of the IP PHONE parameter xxxxxxx must be all ASCII characters and no longer than 7 set protocol X Set protocol of the IP PHONE parameter X range from 0 2 0 for protocol is h323 1 for protocol is sip 2 for protocol is mgvp set language X Set language of
6. nd then press om confirm setting the phone with DHCP Local IP confirm setting the phone without DHCP Dial up and disconnection onfirm PPPoE dial up disable onfirm PPPoE dial up enable local I Eonfirm PPPoE dial up disconnection The IP PHONE reboot and settings take effect Setting subnet mask Input the subnet mask and then press Subnet mask rim then the keypad light will be dark When it is bright again setting is successful Press again to check the subnet mask Subnet mask For example press 255 255 255 0 Subnet mask pun mask is set as 255 255 255 0 Setting router IP address IP 300 User Manual Under setting mode Input the router IP address and then press and then the keypad light will be dark When it is bright again setting is successful Press ETE to check the address For example press 192 168 1 25 o the gateway IP address is set as 192 168 1 25 Setting gatekeeper mode enable disable Under setting mode Press 5 d then press Local IP bnfirm setting the phone without gatekeeper mode Press a d then press scott tm setting the phone with gatekeeper mode Setting services provider IP address Under setting mode Input the services provider IP address and then press s firm then the keypad light will be dark When it is bright again setting is successful Press ain to check the service IP address For exam
7. the IP PHONE IVR and language of the HTTP configuration page parameter X range from 0 2 0 for English 1 for Simplified Chinese GB 2 for Traditional Chinese BIG5 set mac XX XX XX XX XX Set MAC address of the IP PHONE parameter xx xx xx xx must be all HEX number ANOTE The IP PHONE s default setting the MAC address from IETF distributes if change it probably can occur the conflict with other equipment set dhcp X Parameter X range from 0 1 X 1 set to use DHCP X 0 set without DHCP set debug X Set open debugging message output grade for special tool X range from 0 2 X 0 close debugging output X 1 0pen debugging output grade 1 output text debugging message X 2 open debugging output grade 2 output not only text debugging message but also set pppoe X Parameter X range from 0 1 X 1 set to use PPPoE dial up X 0 set not to use PPPoE dial up set ppp id IP 300 User Manual When PPPoE dial up set dial up id set ppp pin When PPPoE dial up set dial up pin set ip XXX XXX XXX XXX Set IP address of the IP PHONE set subnetmask XXX XXX XXX XXX Set subnet mask of the IP PHONE set router XXX XXX XXX XXX Set router IP address of the IP PHONE set dns XXX XXX XXX XXX Set DNS IP address of the IP PHONE set tftp XXX XXX XXX XXX Set TFTP server IP address of the IP PHONE which is used for downloading upgrading programs If set TFTP 0 0 0 0 the phone auto find tftp service set proxy Parameter
8. x x range form 0 1 X 1 set to use gatekeeper X 0 set without gatekeeper set gkid X set gatekeeper ID parameter max length is 16 range from 0 9 and ASCII character set gkip XXX XXX XXX XXX Set gatekeeper IP address if set gk 1 and set gkip 0 0 0 0 the phone auto find gatekeeper set localalias X set IP PHONE gatekeeper logon alias X range form 0 1 X 0 phone number logon with H323ID X 1 phone number logon with E 164 set remotealias X set IP PHONE call parameter after logon on X range form 0 1 X 0 calling number with H323ID for gatekeeper X 1 calling number with E 164 for gatekeeper set fast start X Parameter X range from 0 2 X 0 set without fast start X 1 set to use fast start when calling X 2 set to use fast start and H245 tunneling Advice to set X 2 unless the callings is errors please try to set X 0 or 1 set h323id XXXXXXXXXXXXXXXX Set IP PHONE H 323 ID X max length is 16 X range from 0 9 and ASCII character 21 IP 300 User Manual set dtmf X Set IP PHONE DTMF relay type parameter x range form 0 3 it means X 0 set H245 String X 1 set H245 signal X 2 set Q931 keypad X 3 set RFC2833 Default is O set gwip XXX XXX XXX XXX Set audio gateway IP address of the IP PHONE which is used for direct call If set gwip 0 0 0 0 phone not use audio gateway set dialplan X Parameter X range from 0 1 X 1 set to use dial plan X 0 set without dial plan When set X 1 dddcode iddcod
9. IP 300 User Manual IP 300 USER MANUAL Table of Contents IP PHONE Summary IP PHONE Characteristics System Description Hardware Characteristics Software Characteristics Standard and Protocol Electric Characteristics Operational Environment Specification Installation Front panel view Back and side view Install the IP Phone Setting Setting by keypad Setting local IP address Setting DHCP enable disable Setting PPPOE enable disable Setting subnet mask Setting gateway IP address Setting gatekeeper mode enable disable Setting gatekeeper IP address Logoff to specify gatekeeper Setting phone number Setting quick dial phone number Setting TFTP enable disable Setting with Telnet program Connect the IP PHONE with standard Telnet program Detailed description of the IP PHONE commands Command Command get Command set Command exit Command write Setting with browser based on WEB IP 300 User Manual TCP IP settings Number length Area code Country code IDD prefix DDD prefix With inside line Access local prefix Access long prefix With CDR Connect to BOEX IP Phone with browser based on WEB Verify the password With DHCP With PPPoE PPPoE ID PPPoE Pin Local IP address Subnet mask Router IP address DNS IP address TFTP IP address H 323 settings With proxy and auto find proxy Proxy IP address RTP Port Q931 Port RAS Port H245 Port With Service Service ID Service IP address DTMF relay
10. alling the IP PHONE Front panel see Fig 1 Keypad 1 Local IP address Service IP address Phone number Subnet mask Router IP Quick dial up made call Missed ID 9 Volume ON DO BW P 10 Save key 11 Volume 12 Redialing 13 Calling 14 Hand free SPEAKE 15 LED 16 Save number key 17 Number key Fig 1 NOTICE With H 323 protocol services provider IP address refers to gatekeeper IP address IP 300 User Manual Side view See Fig 2 Interface RJ 45 port Power adapter port N Fig 2 Installing Process 1 Collect all the necessary parameters of your network for your IP PHONE setting If the network supports DHCP service or not Local IP address Subnet mask Default router address With gatekeeper gatekeeper IP address and local E 164 phone number 2 Connect the IP PHONE according the following methods Put your IP PHONE nearby the power socket Insert one end of the Ethernet skip connecting cable into RJ45 connector at the backside of the IP PHONE and connect the other end with HUB or switch or wall socket ground socket of the structured cabling system w NOTE If network without HUB the IP PHONE should be connected with other Ethernet equipment such as XDSL adapter CABLE modem or PC by crossing over cable Otherwise the direct connecting cable is applied IP 300 User Manual Connect the access
11. at most 40cm from the microphone to ensure talking quality Calling with gatekeeper mode Call with the handset Pick up the handset if dialing tone heard you can dial the number or IP address of other endpoint And then press Whe B hang up the handset to standby status Then the dialed number and calling time is stored in one heard the called phone is ringing and waiting for receiving When call is over calling memory Call with hand free Press anl tone heard you can dial the number When call is over press the hand free key to standby status Then the dialed number and calling time is stored in calling memory 31 IP 300 User Manual Beforehand dial up Press you want dial the number and then press r pre If busy tone heard after the number dialed the called party is communicating Hang up the dia ber will calling speaker and call again later When dialing tone heard you can press to dial the number called last time 5 Quick dial up Input the number of quick dial up press can dial the number preset Call without gatekeeper The IP PHONE can only call directly with IP address under no gatekeeper mode Pick up the handset if dialing tone heard dial the called IP address and then press For example if the calle poe is 92 126 1 102 press 192 126 1 102 and then press You anytime can finish calling by hanging up the Calling directly with audio gateway W
12. e iddprefix dddprefix maxnumberlen enable when set X 0 these parameters disable set phonenumber XxXxXxXxxxxxxxxx Set IP PHONE to use E 164 number parameter XXXXXXXXXXXXXX max length is 16 range from 0 9 number set countrycode xxxx Set the country code according to E 164 rule For example the country code of china is 86 the country code of USA is 1 etc set iddprefix xxx Set IDD service prefix number according to E 164 rule For example IDD service prefix number of china is 00 IDD service prefix number of USA is 1 etc set areacode xxxx 22 IP 300 User Manual Set the area code according to E 164 rule For example the area code of Beijing is 10 the area code of Shanghai is 21 etc set dddprefix xxx Set DDD service prefix number according to E 164 rule For example DDD service prefix number of china is 0 DDD service prefix number of USA is 1 etc set innerline X Parameter X range from 0 1 X 1 enable set to use AT 323 as a extension X 0 disable set without AT 323 as a extension set localprefix x Set the prefix number to access local outside line parameter X max length is 1 and range from 0 9 set nonlocalprefix x Set the prefix number to access long distance outside line parameter X max length is 1 and range from 0 9 set cdr X Parameter X is range from 0 1 X 1 set to output CDR X 0 set without output CDR set cdrip XXX XXX XXX XXX Set CDR server IP address set maxnumberlen x S
13. et the local phone number length For example the local phone number length of Beijing is 8 Shanghai is 8 Lhasa is 7 etc Parameter X max length is 1 and range from 0 9 set prepaid X Parameter X range from 0 1 X 1 set to use prepaid calling card X 0 set without prepaid calling card set acount XXXXXXXXXXXXXXXX 23 IP 300 User Manual Set the prepaid calling card account the account length is within 16 digits set pin xxxxXXXXXXXXXXXX Set the prepaid calling card pin the pin length is within 16 digits set answer X set IP PHONE auto answer after some rings X range from 0 9 X 0 set to not answer Default is 5 Max is 9 set ringtype x Parameter X range from 0 3 x 0 use default ring x 1 use ring1 x 2 use ring 2 x 3 use ring3 set audio frames x Set the audio frames of each data packet and set which codec to be used when set audio frames parameter x is within 1 7 set audio type x Set the audio type which codec to be used parameter x is within 1 5 It means 0 G 711U 1 G 711A 2 G 723 1 3 G 729 set 6 3K X Set IP PHONE with G 7231 use 6 3K Patameter X range from 0 1 X 1 use 6 3K and X 0 use 5 3k set handfree input X Set initial volume of handfree microphone X must be within 0 15 set handfree output X Set initial volume of handfree speaker X must be within 0 31 24 IP 300 User Manual set handfree tone X Set initial volume of handfree dial tone X must be wit
14. etwork IP PHONE can be set with an E 164 phone number so that its operation is just like a phone on SCN Two 10 base TRJ 45 port for connecting with network May communicate with a phone on PSTN with suitable network or a compatible IP phone or application Support G 711A G 711u G 723 1 5 3 6 3 kbps and G 729A B audio codec If necessary the calling signal can be set as H 323 or SIP Good interoperability with IP phone gateway and gatekeeper which are compatible with H323V4 LCD display System Characteristics IP 300 User Manual In this chapter we will make a detailed description on the system characteristics of IP PHONE Hardware Characteristics Keypad besides the standard keys 0 9 there are another 15 function keys for operation and setting of IP PHONE Details see section IP PHONE setting Software Characteristics Determined by different protocol used by the services provider the IP PHONE owns different software characteristics following are characteristics with protocol H 323V4 Log on gatekeeper Automatic find gatekeeper Automatic assign IP address subnet mask and gateway IP address with DHCP Remote upgrading Voice active detection Comfortable noise generation 16ms echo cancellation Dynamic buffer management minimize effect to voice quality caused by audio delay jitter Optional Configuration Methods setting with keypad of the IP PHONE IP 300 User Manual Through netwo
15. hen without gatekeeper mode the IP PHONE can call directly with audio gateway Pick up the handset or press fain tone heard you can dial the number When call is over Hang up the handset or press the hand free key to standby status NOTE Under this mode the gatekeeper IP address should be set as 0 0 0 0 details see section setting the IP PHONE PPPoE dial up 1 Use Telnet set the IP Phone Set PPPoE enable set dial up id and pin then write The phone will reset Example 32 IP 300 User Manual P gt set pppoe enable Set PPPoE P gt set ppp id pa1688 Set user name P gt set ppp in 1234 Set user password P gt write 2 After phone reset Phone dial up with PPPoE oi pnnect the link Local IP 3 End of using or disconnect PPPoE press Speaker Volume Adjustment Under normal mode If Pick up the handset press the handset Andset volume If press and e press to lower the T volume and then press to Id then prl Speaker to louder the spe speaker volume Under setting mode the default volume of the handset can be set X NOTE Under normal mode the adjusted volume cannot be stored If the phone is shut up the volume will return to the default volume Review made calls and received calls Review received calls Press 9 eve call number will be played and press iil the received calls number will be played backward one by Received
16. hin 0 15 but x 0 equal to x 15 set handset input X Set initial volume of handset microphone X must be within 0 15 set handset output X Set initial volume of handset speaker X must be within 0 31 set handset tone X Set initial volume of handset dial tone X must be within 0 31 but x 0 equal to x 15 set vad X Parameter X range from 0 1 X 1e set to use VAD X 0 set without VAD set aec X Parameter X range from 0 1 X 1e set to use AEC X 0 set without AEC set agc X Parameter X range from 0 1 X 1e set to use AGC X 0 set without AGC For example P gt set phone number 62781513 P gt set e164 enable NOTE Parameters set by command set should be stored by command write and they will not be effective until the IP PHONE is restarted Command exit Syntax description no keyword and parameter 25 IP 300 User Manual Usage exit from connection with Telnet all changes will not be saved Relevant usage none Detailed description none For example P gt exit exit without save goodbye Command write Syntax description no keyword and parameter Usage save all settings and restart the IP PHONE Relevant usage none Detailed description none For example P gt write NOTE Telnet command should be input by minuscule and password is sensitive to capital letter and minuscule IP 300 User Manual Setting with browser based on WEB Note Please use standard browser based on WEB f
17. ngs item can set iDial number INamei and iPhone number etc See also Fig 22 29 IP 300 User Manual Speed Dial Settings VIP 001 028 Dial Name Phone number Dial Name Phone number 001 j114 114 015 002 4192 192 168 1 2 016 Save and back Save and goto 001 028 v Fig 22 Speed Dial Settings Fixing after the above Speed dial parameter click iSave and go to button to next page or press Save and back button skip to basic setting then parameter write back to the IP PHONE Operating the IP PHONE Operation Receiving a call If being called the IP PHONE will ring to remind you a call in 30 IP 300 User Manual 1 Receiving a call with handset pick up the handset and you can communicate with the other end When communication is over hang up the handset to standby status 2 Receiving with the handset transferring to hand free When receiving a call with the speaker press a the speaker to continue calling with hand free When call is over press to standby s e 3 Receiving a call with hand free When the IP PHONE rings press to communicate with the other end When call is over press to standby status 4 Receiving a call with hand free transferring to handset When communicating with hand free pick up the handset and you can continue communication with the handset When call is over hang up the handset to standby status NOTE When communicate with hand free please keep
18. of set IP PHONE to use build in H323 proxy X range form 0 5 meanings as follows X 0 not to use build in proxy X 1 to use build in proxy but please set proxyip X 2 to use build in proxy but auto find second level router IP 300 User Manual X 3 to use build in proxy but auto find third level router x 4 to use build in proxy but auto find fourth level router x 5 to use build in proxy but find it with assistant serve set proxyip XXX XXX XXX XXX Set proxy IP address of the IP PHONE set q931port xxxxx Set the q931 port number Parameter xxxxx taking value scope should be avoided the famous known and within 1024 65535 set rasport xxxxx Set the ras port number Parameter xxxxx taking value scope should be avoided the famous known and within 1024 65535 set h245port xxxxx Set the h245 port number Parameter xxxxx taking value scope should be avoided the famous known and within 1024 65535 set rtpport xxxxx Set the h245 port number Parameter xxxxx taking value scope should be avoided the famous known and within 1024 65535 set phone number XXXXXXXXXXXXXXX Set E 164 phone number of the IP PHONE parameter XXXXXXXXXXXXXXX must be all numbers within 0 9 and no longer than 15 amp NOTE Parameter xxxxx taking value scope should be avoided the famous known and 20 IP 300 User Manual within 1024 65535 In order to avoid giving rise to the conflict RTP port number must be even number set gk
19. or example Microsoft IE Netscape Navigator etc Input IP PHONE IP address in browser address column http 192 168 1 100 See also Fig 17 Fig 17 Setting with browser based on WEB Verify the user password Input user password to ipasswordi column See also Fig 18 welcome to phone settings password Fig 18 Input passwords Note The IP PHONE s default password 1234 Basic settings 27 IP 300 User Manual tep ip settings mac 00 09 45 00 00 54 use dhep rH pppoe E ppp id Ppp pin ip 192 168 1 118 subnet mask 255 255 255 0 router 192 168 1 1 dns 202 106 2 20 tftp jo 0 0 0 h 323 settings o proxy ip fp 9 9 9 n port 1752 q 931 port 1750 ras port 1750 h 245 port 1752 use gk Vv gk id gk 192 168 1 195 h323 id dtmf H245 String gw fo 0 0 0 m proxy phone settings dial plan phone number fis ddd code idd code se idd prefix foo ddd prefix inner line E local prefix lr nonlocal prefix cdr o cdr ip p 000 max phone number prepaid i account Ee pin p po e answer E ring type handset input jir handset output speaker output update speed dial E mr TCP IP settings TCP IP settings item can set ILocal IP isubnet maski route IPt iuse DHCP TTFTP IPi iDNS IP etc See also Fig 19 tcp ip settings mac 00 09 45 00 00 54 use dhep r pppoe a ppp id elc Ppp pin iem ip 192 168 1 118 subnet mask 255 255 255 0 router 192 168 1
20. ory power adapter with the power socket and insert the output plug into power adapter port 2 of the IP PHONE 3 Set local IP address subnet mask and router IP address 4 If use gatekeeper mode please set gatekeeper IP address or set gatekeeper IP 0 0 0 0 to auto find gatekeeper 5 lf use E 164 number to call please set Localalias 1 lf use H 323 ID to call please set Remotealias 1 6 Detailed setting method and process please see section Setting the IP PHONE Setting the IP PHONE Optional setting methods Set with keypad of the IP PHONE Through network interface setting with standard Telnet program Telnet user interface version firmware only Through network interface setting with browser based on WEB HTTP user interface version firmware only Set with press keys Press pe up handset and input password No 19 LED flashing then the phone is under setting mode amp NOTE Under setting mode if you press again or hang up the handset the phone will return to the normal mode When setting should be input by IP 300 User Manual Setting local IP address Under setting mode Input the local IP address and then press ome font and then the keypad light will be dark When it is bright again setting is successful Press Local IP Setting DHCP enable disable Local IP again to che Under setting mode Press B Press and then press Setting P In Under setting mode
21. ple press 192 168 1 23 he services provider IP address is set as 192 168 1 23 If setting with gatekeeper mode but setting gatekeeper IP 0 0 0 0 the phone auto find gatekeeper Logout from specify gatekeeper Under setting mode IP 300 User Manual then press e irm the phone will log off to specify gatekeeper Press Setting phone number Under setting mode Input the phone number and then press then the keypad light will be dark When it is bright again setting is successful Press Phone number ont check the number For example press62781417 Phone number bn local phone number is set as 62781417 Setting Quick dial phone number Under normal mode Press the number key from to B the to specify of Save number Under setting mode input phone number and then press Save number e number will be is stored at relevant position Setting upgrade with TFTP Under setting mode m press perl onfirm upgrade with TFTP NOTE The IP PHONE parameters can not be set by keypad when it is not in setting mode press Setting with Telnet program Telnet user interface version firmware only Connect the IP PHONE with standard Telnet program IP 300 User Manual Click start run in the windows desktop and input Telnet 192 168 1 100 in the command line or input Telnet 192 168 1 100 in the DOS command prompt window the operation system will set
22. rds IP 300 User Manual Usage display basic parameters of the IP PHONE Relevant usage none Detailed description get Display basic running parameters of the IP PHONE For example P gt get protocol 0 h323 mac 00 09 45 64 04 0f pppoe O disable ip 192 168 1 120 dns 202 106 0 20 proxy 1 q931port 1758 gk 1 enable localalias 1 e164 h323id empty dialplan O disable iddcode 86 innerline O disable cdr 0 prepaid 0 answer 5 audioframes 1 handsetin 11 speakerin 12 vad 1 test000000 P gt password 1234 dhcp O disable pppid test1 subnetmask 255 255 255 0 tftp 192 168 1 195 proxyip 211 147 17 41 rasport 1758 gkid empty remotealias 1 e164 dtmf O H245 string phonenumber 120 iddprefix 00 localprefix 3 cdrip 192 168 1 1 account 222 ringtype 0 audiotype 2 g7231 handsetout 20 speakerout 29 agc 0 Command set language 1 gb debug 1 ppppin test1 router 192 168 1 1 rtpport 1760 h245port 1760 gkip 192 168 1 195 faststart 1 gwip 0 0 0 0 dddcode 1 dddprefix 00 nonlocalprefix 4 maxnumberlen 10 pin 222 6 3k 1 handsettone 11 speakertone 11 aec 1 IP 300 User Manual Syntax description optional keywords password protocol language mac dhcp Od debug pppoe 0d pppid ppppin ip subnetmask router dns tftp proxy proxyip rtpport q931port rasport h245port gk 0 1 gkid gkip localalias remotealias faststart 0 1 h323id dtmf gwip dialplan 0 1 phonenumber dddcode
23. rk interface setting with standard Telnet program Setting with browser based on WEB Standard and Protocol The IP PHONE may support following standards and protocol IEEE 802 3 10 Base T 1 RJ 45 connector G 711A G 711p G 723 1 5 3K 6 3 Kbps and G 729 audio codec Optional calling signal of H 323 or SIP and MGCP NOTE For AT 323 net phone G 723 1 or G729 audio codec algorithm will be chosen by upgrading updating the software After upgrading updating the software the phone should be restarted Quick dial up setting Definable dialing plan TCP IP Internet Transport and Control Protocol RTP Real time Transport Protocol RTCP Real time Control Protocol G 723 1 G 729 VAD CNG economical bandwidth G 165 16ms Echo cancel DTMF DTMF Tone Generate and Detection IP 300 User Manual DHCP Dynamic Host Configuration Protocol DNS Domain Name Server NTS Network Time service Telnet Internet s remote login protocol TFTP Trivial File Transfer protocol HTTP Hyper Text Transfer protocol Build in H323 proxy support Electric Characteristics Voltage 7 5V DC Power 0 5W max Power adapter AD DC input 220V 400mA Network interface RJ 45 Ethernet Connect Operational Environment Operational temperature 0 to 50 C 32 to 122 F Storage temperature 30 to 65 C 22 to 149 F Humidity 10 to 9096 no dew Specification 198 x 176 x 60 mm Lx W x H IP 300 User Manual Inst
24. w com cn Upgrade Operation pf nll Local IP a Local IP SSS If use communa ase set IP PHONE TFTP IP address then under setting mode press IP PHONE phone will get the upgrade files from appointed TFTP service After getting the files IP PHONE auto upgrade then reboot Upgrade operation finish If use local TFTP service please set IP PHONE TFTP IP or set TFTP IP 0 0 0 0 to auto find TFTP IP address After getting upgrade files If the files be compressed files please decompress the files in a directory and change the TFTP Server Root directory as the directory which include the upgrade files NOTE Don t change the files name or else upgrade fail Any changes of the product performance and specification referred herein this manual will not be advised later 35 IP 300 User Manual 36

Download Pdf Manuals

image

Related Search

Related Contents

Illumine CLI-EMM029714 Instructions / Assembly  Bedienungsanleitung  EA758RW-41 (LED ライト)取扱説明書 - 作業中  1st Step - Rombro Solar Energy  CV 14DBL・CV 18DBL  Manual - Pacific Energy  HP ZR2330w User's Manual  D6000 SERIES USERS MANUAL  Descargar Manual del Propietario  【UL36000】UNLIMITED ビレットスイッチケースセット - J  

Copyright © All rights reserved.
Failed to retrieve file