TVL4000 II User Manual
Contents
1. 12 14 User Manual 1 0 TVL4000 Il General Information Unpacking Thank you for purchasing either the TVL4000 II by Ela tion Professionals Every TVL4000 II has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully inspect your fixture for any damage and be sure all equipment necessary to operate the unit has arrived intact In the event damage has been found or parts are missing please contact our toll free customer support number for fur ther instructions Please do not return this unit to your dealer without contacting customer support first Introduction The TVL4000 II is a DMX intelligent LED fixture The TVL4000 II has 3 DMX channel modes Mode 1 is 2 DMX Channels Mode 2 is 2 DMX Channels and Mode 3 is 3 DMX Channels This fixture has two operating modes manual mode or DMX controlled The TVL4000 II can be run as stand alone unit or in a master slave configuration Customer Support Elation Professionals provides a toll free cus tomer support line to provide help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www elationlighting com for any com ments or suggestions Service Hours are Monday through Friday 8 00 a m to 4 30 p m Pacific Standard Time Voice 323 582 3322 Fax2. 323 832 9142 E mail support elationlighting com To purchase parts online visit http parts elationlighting com Warning To prevent or reduce the risk of electrical shock or fire do not expose this unit to rain or moisture Warning This may cause severe eye damage Avoid looking directly into the light source at all times Elation Professionals www elationlighting com TVL4000 II User Manual Page 2 TVL4000 II To optimize the performance of this product please read these operating instructions carefully to familiarize yourself with the basic operations of this unit These instructions contain important safety information regarding the use and maintenance of this unit Please keep this manual with the unit for future reference TVL4000 Il Features 3 DMX Channel Modes Mode 1 is 2 DMX Channels Mode 2 is 2 DMX Channels amp Mode 3 is 3 DMX Channels e 2 Operating Modes Manual Mode amp DMX Control e Digital Display for Address and Function Setting General Instructions TVL4000 II The TVL4000 II carry a 2 year 730 days limited warranty Please fill out the enclosed warranty card to validate your purchase and war ranty You may also register your product online at www elationlight ing com All returned service items whether under warranty or not must be freight pre paid and accompany a return authorization R A number If the unit is under warranty you must provide a copy of your proof of purchase invoice
3. the power source With this switch there is no need to worry about the correct power voltage this unit can be plugged in anywhere Also be sure to only use the included I E C power cable supplied with the unit DMX 512 DMX is short for Digital Multiplex This is a universal pro tocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers A DMX controller sends DMX data instructions from the controller to the fix ture DMX data is sent as serial data that travels from fixture to fixture via the DATA IN and DATA OUT XLR terminals located on all DMX fixtures most controllers only have a DATA OUT terminal DMX Linking DMX is a language allowing all makes and models of different manufactures to be linked together and operate from a sin gle controller as long as all fixtures and the controller are DMX com pliant To ensure proper DMX data transmission when using several DMX fixtures try to use the shortest cable path possible The order in which fixtures are connected in a DMX line does not influence the DMX addressing For example a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line at the beginning at the end or anywhere in the middle When a fixture is assigned a DMX address of 1 the DMX controller knows to send DATA assigned to address 1 to that unit no matter where it is located in the DMX chain Data Cable DMX Cable Requi
4. All non ELATION brands and product names are trademarks or registered trademarks of their respective companies ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all liabilities for property equipment building and electrical damages injuries to any persons and direct or indirect economic loss associated with the use or reliance of any information contained within this document and or as a result of the improper unsafe insufficient and negligent assembly installation rigging and operation of this product TVL4000 II Optional Accessories ITEM Heavy Duty Wrap Around Hook Clamp ORDER CODE TRIGGER CLAMP DRCQTVL4 Quad Road Case for TVL4000 II Special Order Item LSF536 Light Shaping Filter 30 20 x 24 Sheet LSF537 Light Shaping Filter 20 20 x 22 Sheet 50 ft 15 2m Spin PRO DMX Cable Elation Professionals www elationlighting com TVL4000 II Instruction Manual Page 18 AC3PDMXSOPRO ACSPDMX10PRO ACSPDMX25PRO ACSPDMXSOPRO TVL4000 Il Specifications TVL4000 II 110 240V 50 60Hz 1600 LEDs 800 Cool White amp 800 Warm White Power Consumption 160W Dimensions 25 9 L x 22 7 W x 5 1 H 658mm x 5 6mm x 130mm Weight 27 Lbs 12 kgs Colors Cool amp Warm White DMX 3 DMX Channel Modes 2 DMX Channels 2 DMX Channels amp 3 Channels Any Safe Secure Position 2 Year 730 days Working Position Warranty Please Note Specifications
5. Please contact Elation customer support for a R A number TVL4000 II Warranty Registration Handling Precautions Caution There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures warranty In the unlikely event your unit may require service please contact Elation Professionalse During operation the housing may become hot Avoid touching the unit with bare hands while in use Elation Professionalse will not accept any liability for any resulting damages caused by the non observance of this manual or any unau thorized modification to this unit Elation Professionals www elationlighting com TVL4000 II User Manual Page 3 TVL4000 Il Safety Precautions For Your Own Personal Safety Please Read and Understand This Manual Completely Before You Attempt To Install Or Operate This Unit To reduce the risk of electrical shock or fire do not expose this unit rain or moisture Do not spill water or other liquids into or on to your unit Do not attempt to operate this unit if the power cord has been frayed or broken Do not attempt to remove or break off the ground prong from the electrical cord This prong is used to reduce the risk of electrical shock and fire in case of an internal short Disconnect from main power before making any type of connection Do not remove the cover under any conditions There are no user serviceable parts inside Never op
6. TVL4000 II User Manual Page 11 TVL4000 Il System Menu LELI With this function you can have the LED display turn off after 20 seconds 1 Press the MENU button until LED is displayed press ENTER 2 The display will show either UN or UFF Press the UP or DOWN buttons to select 0N to keep the LED display On at all times or UFF so that the LED display turns off after 20 sec onds 3 Press ENTER to confirm WIDI This function will reverse the display 180 1 Press the MENU button until ISP is displayed press ENTER 2 Press the UP button to select UISP to activate this function or USIP to deactivate this function 3 Press ENTER to confirm Test This function will run a self test program 1 Tap the MENU button until TES is displayed press ENTER 2 The fixture will now run a self test program To stop the self test press either the MENU or ENTER button F i nS With this function you can display the running time of the unit 1 Press the MENU button until FARS is displayed press ENTER 2 The display shows the running time of the unit Press MENU to exit Elation Professionals www elationlighting com TVL4000 II User Manual Page 12 TVL4000 Il System Menu V ER Use this function to display the Software version of the unit 1 Press the MENU button until VER is displayed press ENTER 2 The display will show the software ver
7. Termination When longer runs of cable are used you may need to use a terminator on the last unit to avoid erratic behavior A terminator is a 90 120 ohm 1 4 watt resistor which is con nected between pins 2 and 3 of a male XLR connector DATA and DATA This unit is inserted in the female XLR connector of the last unit in your daisy chain to terminate the line Using a cable terminator ADJ part number Z DMX T will decrease the possibilities of erratic behavior 120 Ohm 1 4 W between PIN 2 DMX and PIN 3 DMX of the last fixture Figure 4 Termination reduces signal errors and avoids signal transmission problems 0 and interference It is always advisable Z X z to connect a DMX terminal Resistance Elation Professionals www elationlighting com TVL4000 II User Manual Page 6 TVL4000 II Set Up TVL4000 II Control Panel 5 Pin XLR DMX Connectors Some manufactures use 5 pin XLR connectors for DATA transmission in place of 3 pin 5 pin XLR fixtures may be implemented in a 3 pin XLR DMX line When inserting stan dard 5 pin XLR connectors in to a 3 pin line a cable adaptor must be used these adaptors are readily available at most electric stores The chart below details a proper cable conversion 3 Pin XLR to 5 Pin XLR Conversion 3 Pin XLR Female Out 5 Pin XLR Male In 1 Display To show the various menus and the selected functions 2 Indicator LED 3 Button MENU To select the programming functions To go bac
8. ability of the product if the product has been repaired or serviced by anyone other than the Elation Professionals factory unless prior written authorization was issued to purchaser by Elation Profes sionals if the product is damaged because not properly maintained as set forth in the instruction manual D This is not a service contract and this warranty does not include mainte nance cleaning or periodic check up During the period specified above Ela tion Professionals will replace defective parts at its expense and will absorb all expenses for warranty service and repair labor by reason of defects in mate rial or workmanship The sole responsibility of Elation Professionals under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of Elation Professionals All products covered by this warranty were manufactured after January 1 1990 and bear identifying marks to that effect E Elation Professionals reserves the right to make changes in design and or improvements upon its products without any obligation to include these changes in any products theretofore manufactured F No warranty whether expressed or implied is given or made with respect to any accessory supplied with products described above Except to the extent prohibited by applicable law all implied warranties made by Elation Profession als in connection with this product i
9. and improvements in the design of this unit and this manual are subject to change without any prior written notice Auto Sensing Voltage This fixture contains a automatic volt age switch which will auto sense the voltage when it is plugged into the power source Elation Professionals www elationlighting com TVL4000 II User Manual Page 19 Elation Professionals A Division of the AmericanDJ Group of Companies World Headquarters 6122 S Eastern Ave Los Angeles CA 90040 USA Tel 323 582 3322 Fax 323 832 9142 Web www elationlighting com E mail info elationlighting com American DJ Europe Junostraat 2 6468 EW Kerkrade Netherlands service adjgroup eu www americandj eu Tel 31 45 546 85 00 Fax 31 45 546 85 99
10. erate this unit when it s cover is removed Always be sure to mount this unit in an area that will allow proper ventilation Allow about 6 15cm between this device and a wall Do not attempt to operate this unit if it becomes damaged This unit is intended for indoor use only use of this product out doors voids all warranties Always mount this unit in safe and stable matter Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience recep tacles and the point where they exit from the appliance Cleaning The fixture should be cleaned only as recommended by the manufacturer See page 16 for cleaning details Heat This fixture should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat The fixture should be serviced by qualified service personnel when A Objects have fallen or liquid has been spilled into the appliance B The appliance has been exposed to rain or water C The appliance does not appear to operate normally or exhibits a marked change in performance Elation Professionals www elationlighting com TVL4000 II User Manual Page 4 TVL4000 II Set Up Power Supply The Elation Professionals TVL4000 II contains an automatic voltage switch which will auto sense the voltage when it is plugged into
11. kward in the selected functions Netused Pin Do Not Use To confirm the selected functions DOWN To go forward in the selected functions ENTER 4 Color Temperature Adjust the color temperature from 3200k to 6500k 25K as a step When the value is between 4825K and 4875K the green LED indicator will light It means the power consumption of CW WW color the has reached maximum Dimmer Adjust knob Adjust bightness for the unit DMX output For DMX512 link use 3 5 pin XLR plug cable to link the next unit DMX input For DMX512 link use 3 5 pin XLR plug cable to input DMX signal Oo N O A Mains input Connect to supply mains power Elation Professionals www elationlighting com TVL4000 II User Manual Page 7 Elation Professionals www elationlighting com TVL4000 II User Manual Page 8 TVL4000 Il System Menu DMX512 Address Setting Channel mode 1 Channel mode 2 Channel mode 3 Master mode Slave mode Manual Setting Blackout Mode Yes Blackout MENU attic MENU x i ao Blackout Mode No Blackout m Dimmer curve ian LED Display Always On LED Display Off di S Display Normal ci IS a Display Inversion SE Self Test Che Fixture Hours wi Software Version Elation Professionals www elationlighting com TVL4000 II User Manual Page 9 TVL4000 Il System Menu System Menu The TVL4000 II comes with an easy to navigate system menu which this next section will detail the fu
12. mirror should be carried out periodically to optimize light output Cleaning frequency depends on the environment in which the fixture operates l e smoke fog residue dust dew In heavy club use we recommend cleaning on a monthly basis Periodic cleaning will ensure longevity and crisp out put 1 Use normal glass cleaner and a soft cloth to wipe down the out side casing 2 Use a brush to wipe down the cooling vents and fan grill 3 Clean the external optics and mirror with glass cleaner and a soft cloth every 20 days 4 Clean the internal optics with glass cleaner and a soft cloth every 30 60 days 5 Always be sure to dry all parts completely before plugging the unit back in TVL4000 II Trouble Shooting Trouble Shooting Listed below are a few common problems that you may encounter with solutions 1 The unit does not work no light and the fan does not work Check the power connection on both the unit and power source 2 Not responding to DMX controller DMX LED should be on If not check DMX connectors and cables make sure they are linked properly If the DMX LED is on and no response to the channel check the address settings If you have intermittent DMX signal problems check the pins on connectors Try to using another DMX controller Check if the DMX cables run near or run alongside high voltage cables that may cause damage or interference to DMX interface circuit Elation Professionals
13. ncluding warranties of merchantability or fitness are limited in duration to the warranty period set forth above And no war ranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said period has expired The consumer s and or Dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall Elation Professionals be liable for any loss or damage direct or consequential arising out of the use of or inability to use this product G This warranty is the only written warranty applicable to Elation Profession als Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published Elation Professionals www elationlighting com TVL4000 II User Manual Page 17 TVL4000 II Notes 2014 ELATION PROFESSIONAL all rights reserved Information specifications diagrams images and instructions herein are subject to change without notice ELATION PROFESSIONAL logo and identifying product names and numbers herein are trademarks of ELATION PROFESSIONAL Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged
14. nctions of each command in the system menu Please read the next section thoroughly TMM OOOK DMX Address Setting 1 First set the unit to your desired DMX Channel mode 2 To set your address tap either the MENU UP or DOWN buttons until ADOR is displayed press ENTER 1 will now be displayed and flashing 3 Press the UP or DOWN buttons to find your desired address When you have found your desired DMX address press ENTER and connect your DMX Controller LANL Switch between the 3 DMX Channel Modes 1 Press the MENU button until LANO is displayed press ENTER Either Muu 2 Channel Mode OD 2 2 Channel Mode or Mut 3 3 Channel Mode will be displayed 2 Press the UP or DOWN buttons to choose your desired DMX mode and press ENTER to confim and exit SLL Set unit in a master slave configuration 1 Tap the MENU button until SLND is displayed press ENTER Either MASP or SL will be displayed 2 Tap the UP or DOWN buttons until your desired setting is dis played press ENTER and then hold MENU for at least 2 3 seconds to confim MN IMI i Manually adjust LED intensity to create desired color temperature 1 Press the MENU button until MANU is displayed press ENTER LEDI LEU or LINN will be displayed LED 1 is warm white LED 2 is cool white and DIMM is the master dimmer for this mode Elation Professionals www elationligh
15. ng clamp not provided affixing it to the mounting bracket that is provided with the unit Always ensure that the unit is firmly fixed to avoid vibration and slip ping while operating Always ensure that the structure to which you are attaching the unit is secure and is able to support a weight of 10 times the unit s weight Also always use a safety cable that can hold 12 times the weight of the unit when installing the fixture The equipment must be installed by a professional and it must be installed in a place where it is out of the reach of people s grasp Elation Professionals www elationlighting com TVL4000 II User Manual Page 14 TVL4000 II DMX Modes amp Traits 2557 100 255 100 100 0 TVL4000 Il Photometric Chart WARM WHITE 3200K 352 FC 3800 LUX 139 FC 1500 LUX 65 FC 700 LUX 39 FC 420 LUX 27 FC 293 LUX COOL WHITE 6500K 446 FC 4800 LUX 177 FC 1900 LUX 84 FC 900 LUX 50 FC 542 LUX 34 FC 362 LUX FULL ON 4500 5000K 790 FC 8500 LUX 316 FC 3400 LUX 146 FC 1570 LUX 87 FC 940 LUX 59 FC 630 LUX UXA EE 30 Beam Angle 0m Im 2m 3m 4m 5m O ft 3 3 ft 6 6 ft 9 8 ft 13 1 ft 16 4 ft Max Beam Diameter Elation Professionals www elationlighting com TVL4000 II User Manual Page 15 TVL4000 II Cleaning Fixture Cleaning Due to fog residue smoke and dust cleaning the internal and external optical lenses and
16. rements For DMX and Master Slave Operation The TVL4000 II has 3 DMX Channel Modes Mode 1 has 2 Channels Mode 2 has 2 Channels and Mode 3 has 3 Channels The DMX address is set electronically using the controls on the rear of the unit Your unit and your DMX controller require a approved DMX 512 110 Ohm Data cable for data input and data output We recommend Accu Cable DMX cables If you are making your own cables be sure to use standard 110 120 Ohm shielded cable This cable may be purchased at almost all pro fessional sound and lighting stores Your cables should be made with a male and female XLR con 3 a nector on either end of the cable Figure 1 Elation Professionals www elationlighting com TVL4000 II User Manual Page 5 TVL4000 Il Set Up Notice Be sure to follow figures two and three when making your own cables Do not use the ground post on the XLR connector Do not connect the cable s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR s outer casing Grounding the shield could cause a short circuit and erratic behavior COMMON DMX512 OUT DMX512 IN 3 PIN XLR DMX 3 PIN XLR Figure 2 XLR Pin Configuration I I 2 Cold 1 Ground i Pin 1 Ground Pin 2 Data Compliment negative I I l XLR Male Socket XLR Female Socket I I I I 1 Ground 2 Cold I I I I I I I I I I Figure 3 Pin 3 Data True positive Special Note Line
17. sion Elation Professionals www elationlighting com TVL4000 II User Manual Page 13 TVL4000 Il Operating Modes Universal DMX Control This function allows you to use a Elatione universal DMX 512 controller to create unique programs tailored to your individual needs 1 The TVL4000 II has 3 DMX Channels Modes Mode 1 is a 2 Channel Mode Mode 2 is another 2 Channel Mode and Mode 3 is a 3 Channel Mode For the DMX modes values and traits see page 15 2 To control your fixture in DMX mode follow the set up procedures on pages 5 7 as well as the set up specifications that are included with your DMX controller 3 Use the controller s faders to control the various DMX fixture traits This will allow you to create your own programs 4 Follow the instructions on page 9 to set the DMX address 5 For longer cable runs more than a 100 feet use a terminator on the last fixture 6 For help operating in DMX mode consult the manual included with your DMX controller Manual Mode This mode allows the user to adjust the color intensity to create their own desired color temperature 1 Press the MENU button until MANO is displayed and press ENTER 2 Follow the instructions on pages 10 11 to operate this mode 3 You can also use the Color Adjust Knob and Dimmer Knob to manually create your desired color temperature Please see the Control Panel on page 8 TVL4000 Il PIACULA The unit should be mounted using a mounti
18. ting com TVL4000 II User Manual Page 10 TVL4000 Il System Menu 2 Use the UP or DOWN buttons to scroll to the color you would like adjust first and press ENTER 3 Use the UP or DOWN buttons to adjust the intensity of the chosen color and press ENTER after the adjustment 4 Continue to make adjustments to the two colors until your desired color is reached Once your desired color is reached do not leave this mode 5 To leave this mode press the MENU button Once you leave this mode all settings will be reset HL Lt Blackout or Stand by mode 1 Press the MENU button until SLND is displayed press ENTER Either Yes or No will be displayed 2 To activate Blackout press the UP or DOWN buttons until Yes is displayed press ENTER to confim and exit The fixture will now be in Blackout mode To deactivate Blackout mode select No and press Enter Li NIL Dimmer Modes 1 Press the MENU button until UiNU is na a press ENTER 2 The display will show either ii 1 ii 2 i a ai H see Dimmer Mode diagrams below To activate a Dimmer Mode press the UP or DOWN buttons to select Dimmer Mode Di 1 ii 2 Kr ior in S then press ENTER to confirm 3 Press MENU to exit and reset the Dimmer Mode setting Dimmer Modes Output Output Output Output DMX DMX DMX DMX DIMMER MODE DIMMER MODE DIMMER MODE DIMMER MODE D1 D2 D3 D4 Elation Professionals www elationlighting com
19. www elationlighting com TVL4000 II User Manual Page 16 TVL4000 Il 2 YEAR LIMITED WARRANTY Warranty A Elation Architectural hereby warrants to the original purchaser Elation Professionals products to be free of manufacturing defects in material and workmanship for a period of two years 730 days from the date of purchase This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought B For warranty service send the product only to the Elation Professionals factory All shipping charges must be pre paid If the requested repairs or ser vice including parts replacement are within the terms of this warranty Ela tion Professionals will pay return shipping charges only to a designated point within the United States If the entire instrument is sent it must be shipped in its original package No accessories should be shipped with the product If any accessories are shipped with the product Elation Professionals shall have no liability whatsoever for loss of or damage to any such accessories nor for the safe return thereof C This warranty is void if the serial number has been altered or removed if the product is modified in any manner which Elation Professionals concludes after inspection affects the reli
Download Pdf Manuals
Related Search