Quick Start Guide
Contents
1. Connect to audio input Connect to speakers Connect to network devices Connect to alarm input cables Connect to the power supply Control options There are several ways to control the TVR 10 Tip Front panel control IR remote control Mouse menu control Web browser control A full range of alphanumeric characters is only available when using the mouse or remote control Front panel control The buttons on the front panel control most functions See Figure 3 on page 3 for locations of the controls Table 2 Front panel control descriptions Item 1 2 Control Description Status LEDs Show the TVR 10 status See Table 1 above Numeric buttons Switch camera views and input numbers MENU Accesses the main menu DISP Displays multiscreen live mode Accesses live mode SRCH Displays the Play Back screen for video playback PTZ Accesses the PTZ control mode LIVE Displays Camera 1 in live mode REC Displays the Manual Record screen TruVision DVR 10 Quick Start Guide Item Control Description 2 ESC Cancels the current changes and returns to the previous screen or main menu 3 Directional In menu mode Left or Right Arrow buttons controls select and Up or Down Arrow buttons edit In playback mode Left or Right Arrow buttons control playback speed PTZ direction control Playback control ENTER Confirms the selection Enables or disables options Pauses playback2. Display Configures the login password request menu timeout video standard time and date and multiscreen layout Camera Configures the camera names video adjustment advanced camera settings time and date on screen position and motion detection Recording Configures the recording mode image resolution recording rates bit rates and pre or post event recording settings Network Configures the standard network settings e mail and advanced network settings Alarms Configures the alarm input type alarm rules alarm output type PTZ linkage and notification settings PTZ Configures PTZ protocols and PTZ addresses User Configures users passwords and access rights Utilities Configures the firmware upgrade hard drive settings Lets you view logs acknowledge alarms restore to factory settings reboot and power off Refer to the user manual for more information TruVision DVR 10 Quick Start Guide Exiting the main menu and returning to live mode You can exit the main menu and return to live mode in several ways e Select Camera or Multiview on the mouse menu e Press the LIVE or ESC buttons on the front panel e Press the ESC button on the remote control Logging on Use passwords to limit access to the TVR 10 Only authorized users should be able to modify menu settings or carry out certain tasks The TVR 10 is shipped with one predefined user configured as the system administrator The default system
3. Live mode is the normal operating mode of the unit From live mode you can switch to playback mode or enter the menu system While in live mode the TVR 10 displays the status of each video channel at the bottom of the screen See Figure 4 below Right click the mouse and then click Show Hide Status or press the button on the remote control to activate or deactivate the status bar Figure 4 Live mode example Camera status Each icon represents a camera The icon color shows the camera status Table 3 below gives the status color code Table 3 Camera status icon color descriptions Color Status description White No video signal Yellow Standby recording when recording upon alarm and or motion Green Recording Blue Motion detection O JK OO gt Red Alarm Overview of the main menu The main menu lets you set up the TVR 10 or change the default settings to suit your installation You must be in live mode to access the main menu To display the main menu right click the mouse and then click Main Menu You can also press the MENU button on the front panel or the remote control Access to different dialog screens varies depending on your access privileges Most screens will only be available to system administrators The main menu has eight commands Each command displays a screen that lets you modify a group of TVR 10 settings Figure 5 Main menu Table 4 Main menu descriptions Command Function
4. screen appears 4 Enter the default user ID and password User ID admin Password 1234 The main menu screen appears 5 Modify the TVR 10 preconfigured settings as required using the various dialog screens See TVR 10 screen map on page 6 6 When customization is complete press ESC to exit to the main menu and return to live mode Connecting the devices Use Figure 1 on page 2 as a visual guide to connect the various peripherals to the TVR 10 P N 1068259 e REV A ISS O6JULO9 Figure 1 TVR 10 back panel connection diagram Connect up to four cameras Connect up to two CCTV monitors one for main two for spot Connect to a VGA monitor Alarm output Connect to a PTZ control Connect to a USB mouse oo a a T Turning on the TVR 10 Turn on the TVR 10 using the power switch on the back panel When you turn on the device the TVR 10 automatically displays all live views from the connected cameras It also automatically begins recording Operating the TVR 10 LED indicators The LED indicators on the front panel light up or flash to alert you to various conditions Table 1 LED indicator descriptions LED Description Power Steady green The TVR 10 is powered up with no error conditions HDD Blinking red Video is being recorded onto the hard drive Solid red The hard drive has an error Tx RX Blinking green Network data is being transferred to or from the TVR 10 2
5. After plugging in and turning on the unit the POWER light on the front panel does not turn on and the fan does not work Power supply is not functioning Fan is not functioning or is not plugged in to the main board After plugging in and turning on the unit the POWER light on the front panel turns green but the fan does not work After plugging in and turning on the unit the POWER light on the front panel turns green and the indicator lights on the panel turn on but the fan does not work The ATX plug in main board is not plugged in If a VGA monitor is connected it takes precedence over a BNC monitor connection There are no images in the monitor connected with VOUT after TVR 10 is started The cable connected with the monitor has failed Main board failure Cannot find the hard drive during the reboot process The power cable of the hard drive is not connected Hard drive failure TVR 10 cannot control PTZ through RS 485 422 cable is not connected the RS 485 422 port properly or not functioning PTZ parameters error RS 485 422 port failure Client software cannot view the Network error TVR 10 live image Connected using wrong DVR parameters IP address port number username or password etc Battery removal The TVR 10 unit contains one 3V Lithium battery This battery can only be removed by a recycling or service technician The remote control comes with two AAA alkaline batteri
6. GE Security TruVision DVR 10 Quick Start Guide Content Contact information 1 Package contents 1 Installation environment 1 Setting up the TVR 10 1 Connecting the devices 1 Turning onthe TVR 10 2 Operating the TVR 10 2 Live mode 4 Overview of the main menu 4 Loggingon 5 Turning off the TVR 10 5 Troubleshooting 5 Battery removal 5 TVR 10 screen map 6 Contact information For contact information see our Web site www gesecurity com Package contents The TruVision DVR 10 model TVR 10 is shipped with the following items e _TruVision DVR 10 e IR infrared remote control e Two AAA batteries e USB mouse e Power supply e AC power cord e _TruVision DVR 10 Quick Start Guide e _TruVision DVR 10 User Manual on CD 2009 GE Security Inc Installation environment Refer to the user manual for detailed information but observe these important requirements e Place the TVR 10 in a secure location e Ensure that the TVR 10 is in a well ventilated area e Donot expose the unit to rain or moisture Setting up the TVR 10 To quickly put the TVR 10 into operation 1 Connect all the devices required to the back panel of the TVR 10 See Figure 1 on page 2 2 Turn on the unit using the power switch on the back panel After running automatic diagnostic tests on the devices the TVR 10 displays video images on screen 3 Press the Menu button on the front panel to access the main menu The log on
7. IR remote control IR remote control operation is similar to the front panel operation To connect the remote control to the TVR 10 1 Insert the AAA batteries included in the box in the remote control 2 Turn on the TVR 10 and wait for the live video to appear 3 On the remote control press and release the Power button The remote control is now operational Mouse menu control Use the USB mouse to navigate and make changes to settings in the user interface Right click the mouse to display a mouse control menu when in live view This menu lets you carry out any TVR 10 operation Connect the mouse using the USB port located at the back panel Figure 3 Front panel Web browser control The TVR 10 Web browser lets you view record and play back videos as well as manage all aspects of the system from any PC with Internet access The browser s easy to use controls give you quick access to all TVR 10 functions To access the TVR 10 open a Web browser and enter the IP address assigned to the TVR 10 as a Web address On the log on screen enter the default user ID and password User ID admin Password 1234 The Web browser uses the following ports Video Port 8000 HTTP Port 80 Figure 2 Web browser EERE i ECD oe Ce Ae hie CED Ce TruVision DVR 10 Quick Start Guide Live mode The TVR 10 automatically enters live mode when powered on
8. administrator log on uses admin as a user name with a password of 1234 The admin user can carry out all TVR 10 operations Note You hear an audible warning when an incorrect user name or password is entered After three incorrect entries the unit returns to live mode Only the system administrator can manage users The administrator can create up to 15 users and allocate their access rights You can modify the admin password but not the admin user name We recommend that you change the admin password once you have finish the installation and setup in order to protect against unauthorized access Specify an admin password of up to four digits We suggest that you use only numbers from 1 to 4 so that you can enter the password from the front panel if required Caution Keep the admin password in a safe place If you should forget it you must return the TVR 10 to the service center to be reconfigured Turning off the TVR 10 To turn off the TVR 10 1 Onthe main menu click Utilities and then click Power Off Press and hold the Power button on the remote control for at least five seconds Enter a user name and password if required 2 Wait 10 seconds then turn off the power switch located on the back of the unit TruVision DVR 10 Quick Start Guide Troubleshooting If you have a problem setting up or configuring your TVR 10 try these solutions before contacting your local supplier Failure Possible reasons
9. es To remove the remote control batteries 1 Detach the remote control s back cover 2 Replace the batteries with any standard AAA batteries 3 Reattach the cover 4 Dispose of the batteries as required by local ordinances or regulations TVR 10 screen map 6 TruVision DVR 10 Quick Start Guide
Download Pdf Manuals
Related Search