NAC6A Manual
Contents
1. Protein skimmer user manual s Product s name Internal type protein skimmer BM NAC6A Bubble macaus Valid aquarium 400 600 L Pump model ATMAN PH2500 Pump power 45 5W Voltage 110 220 120V 60Hz Diameter of Reaction bucket 150mm Max outer dimension 270x170x550 mm Immerged water level 28 33cm www fish street com Thank you for using BUBBLE MAGUS products please read User manual carefully before use Contain A suit of collection cup a suit of main reactor a suit of leading box a suit of drain water system one ATMAN PH2500 water pump with pin brush one air entered tube one air intake kit amp user manual Installation l 4 5 Notice l 2 8 Leading box please fix bottom board of leading box to water pump by outlet screw keep central hole of leading box in line with pump centre then install leading box to bottom board by long Nylon screw Notice the part without hole of leading box s cover should be in line with pump s outlet Install water pump a please take off four silica gel mat and revolve out nylon screw b Insert water pump with leading box to installation board Please put bucket on bottom board main react bucket need telescope into groove of bottom board and adjust position of pump s inlet and bucket s hatch then revolve air intake kit to pump s inlet revolve 2 circles enough don t too tight Air inlet up insert tube into air entered hole of air intake kit other end c2. cm best water level around 30 33cm Guarantee repair free within one year repair for life Product will be improved continuously please understand the technical change isn t noticed
3. onnect to muffler revolve tightly screw of bottom board and put back mat Please put collection cup on collection neck of main reactor After Installation put it into water insert pump s plug in the socket adjust water output tube to control bubble s height thus it can be used Please make sure full water in the water pump before start it else it will be difficult to start up If installation is correct it should appear much bubble quickly when pump start up If no bubble or pump makes a noise or strenuous shake please stop and restart up If it can t solve the problem please contact dealer or our technology person Strictly prohibit pump operate without water Every product tested before leaving factory so some water blob maybe leave on it It s not used vestige and wouldn t affect use Just start to use a few days its result maybe is no very good this is a normal phenomenon After a few days it can be normal working if washing completely main reactor inside this time will be reduced Please adjust bubble level according to aquaria s pollute Don t adjust water level too high avoid water quality fluctuate cause much water effused Please wash collection cup at the fixed date if sludge heaped inside the collection neck it will affect used result Suggest to clear protein segregator and pump every one or two month don t use chemical to clean protein segregator Suggest water level for exterior of protein segregator around 28 33
Download Pdf Manuals
Related Search