Home

User Manual

image

Contents

1. Model S 1051C 5 Portable On camera HDMI LCD Monitor User Manual Please read this User Manual throughout before using Preface Congratulations on your purchase of this product Please read this user manual carefully 1 All internal technologies of this product are protected including device software and trademark Reproduction in whole or in part without written permission is prohibited 2 All brands and trademarks of SWIT Electronics Co Ltd are protected and other relative trademarks in this user manual are the property of their respective owners 3 Due to constant effort of product development SWIT reserves the right to make changes and improvements to the product described in this manual without prior notice 4 This product is covered by 2 years conditional warranty and misuse abnormal handling alterations or modifications in design or construction will void this warranty It is considered normal that the LCD bright dot defects are not to exceed three 5 For any suggestions and requirements on this product please contact us through phone fax Email etc SWIT Electronics Co Ltd Address 10 Hengtong Road Nanjing Economic and Technological Development Zone Nanjing 210038 P R China Phone 86 25 85805753 Fax 86 25 85805296 Email contact swit cc Website http www swit cc Maintenance Monitor 1 Please keep the signal terminals and the cooling vent away from knife edge metal or liquid
2. 5 seconds to 60 seconds 5 HALFTONE Set a transparency value 0 100 of menu display Real time preview supported 10 FUN KEY Settings Submenu The FUN KEY Settings Submenu is to define Function Key F1 and F2 The available function items are 1 PATTERN Color bar test signal switch FUN KEY 2 RATIO Aspect ratio switch 3 SCAN Underscan Overscan switch 4 ZOOM Picture Zoom in 5 CLR TEMP Color temperature switch 6 PIC MODE Preset picture mode switch 7 B W Color Black amp white switch ET 11 Cold Shoe Bracket The provided monitor bracket support both cold shoe and screw mount for camera connection 1 For cold shoe anticlockwise screw the knob to draw the bolt back slide the cold shoe mount into camera and then clockwise adjust the knob to fasten 2 For screw mount clockwise screw the knob to draw the bolt directly into the screw thread of camera till fastened 3 Screw the ball head knob into monitors and lock the ball head Lock L 2 Knob i 3 Cold shoe mount 4 Screw bolt 12 Optional Battery Mount 12 1 S 7001 series DV battery mount S 1051C monitor can use DV batteries by connecting with SWIT S 7001 series mount There re following types of S 7001 for choice Model Compatible battery type Recommended SWIT battery 12 2 Installation of S 7001 mount Screw hole Battery release Slot Terminal S 7001 Rear View Installation S 7001 DV mount is quick releasable Pl
3. ZOOM selection ZOOM1 Canon DSLR scale zoom in 1 2 times ZOOM2 1 5 times zoom in 5 MARKER Select and set the safety mark scale from 80 85 90 and 95 6 RESET Revolve OK to RESET and press to reset all to factory setting 7 Display Settings Submenu The DISPLAY settings submenu is to select the items to be displayed on screen when DISPLAY button is pressed Revolve OK to turn on off the items 1 INFO Including HDMI format aspect ratio underscan overscan zoom status and peaking status 2 MARKER Safety mark 3 TITLE User edited title ADJ DK EXIT 8 Title Settings Submenu Revolve OK button to select the letters and press OK to input Select SPACE to input space and DEL to delete the left letter Max 10 letters are supported After setting press MENU the system will save data to current user and quit menu The menu will automatically save and quit if it remains idle ADJ OK RCT 9 OSD Settings Submenu The OSD Settings Submenu include 1 LANGUAGE Menu language English Chinese selection 2 H POSITION Menu horizontal position 0 100 adjustment real time preview and default value 50 center 3 V POSITION Menu vertical position 0 100 adjustment real time preview and default value 50 center 4 DURATION Menu timeout setting Set a time in seconds in which the menu will automatically quit if remains idle Default 10 seconds Range
4. attery mounts and the DV mounts can be easily taken off and changed to another type 2 Panel Instruction 2 1 Front view HDMI LCD MONITOR LU 9 A 9 Power on off Connect with power cable or mount battery press the and the power indicator is turned on and after 10 seconds the monitor will be switched on and get into normal working status Press the again the indicator is turned off and monitor is switched off Remark Disconnect with power cable or take off the battery if the monitor will not be used for a period of time 2 F1 User definable function key 1 8 F2 User definable function key 2 4 FOCUS Peaking focus assist switch on off Press FOCUS once it will display the current peaking on off status Press FOCUS again to switch on off the focus assist line F COLOR False color switch on off Press F COLOR once it will display the current false color on off status Press Y COLOR again to switch on off the false color mode DISPLAY Display current settings Press Display to display safety mark title and the current input signal information MENU Press to enter Menu OK Under menu system revolve OK to adjust settings and press to apply and out of menu system directly revolve OK to adjust volume 2 2 Rear view 1 PHONE Earphone jack for HDMI audio 2 Battery mount connector Connect with SWIT S 7001 series quick release DV moun
5. ease follow the instructions 1 Please make sure the power terminals are clean and in well condition before use 2 Align the S 7001 slots to the bolts of the monitor rear panel and press tightly in 3 Slide the S 7001 mount down to the bottom 4 If necessary fix the S 7001 mount by screws on the top side 5 Mount the battery to S 7001 to power the monitor i A aae Nr 13 SPECIFICATIONS Geet SSS 14 Packing List 4 Power cable 4 Power cable 5 Cold shoe bracket 5 Cold shoe bracket CB Min HDI to standard HDMI cabe tap to 5 5mm pole DC cable io xtonsion arm reste it canryingcase
6. in order to avoid short circuit and damage 2 Please don t try to disassemble any parts of the monitor by yourself which would probably damage the monitor and do harm to human body and it will cause the invalidation of product warranty 3 Please don t touch the screen with your fingers which would probably deface the screen 4 Please don t press the screen the LCD is extremely exquisite and flimsy The power Please use the provided power adapter or the battery recommended by the manufacturer in order to avoid damage If you use third party power adapter please be sure that the DC voltage is between 6 5V 17V and the plug should be e G The monitor will not work if the polarities are reversed Please never use the light connector 2 pin female in right front of camera handle to power the monitor otherwise it will damage the circuit of the monitor Please disconnect the power cable or take off the battery under the following situations If you do not operate this monitor for a period of time If the power cable or power adaptor is damaged If you operate this monitor by the methods different from this User Manual and cause unknown problems If the monitor housing is broken Working Environment Please don t lay this product on the unstable place Please don t lay this product in hot cold or wet location Cleaning Please clean the screen with dry and downy cloth or special LCD cleanser Please do not press hard when cleaning the sc
7. reen M M 8 MA 6 W M A Please do not use water or other chemical cleanser to clean the screen The chemical may damage the LCD 4 For first time use please tear off the factory LCD film To protect the LCD screen please post the LCD protection film offered in the package 1 Features High resolution LCD Panel 1 2 Mega pixels 5 LCD 800x480 wide viewing angle 16 9 4 3 adjustable HDMI input Accept multi format HDMI input compact and light weight Peaking focus assist The Peaking focus assist function is to mark the sharpest edges of the image with purple color for cameramen to check if the subjects are focused False color The false color is used to aid in the setting of camera exposure Under false color mode the over exposed subjects above 101 IRE on the monitor will display as RED and the underexposed subjects will display as BLUE For correct exposed subjects it will display as green and pink DSLR scale zoom in The Canon DSLR outputs the CMOS sensor ratio HDMI and this zoom in mode can make the effective image scale full screen on the monitor User definable function keys There are 2 function keys on the monitor front panel which permit users to define shortcuts for the various functions User editable video title User can edit a video title for the current camera and the title will display on the top of screen Quick interchangeable DV battery mount The monitor supports various types of DV b
8. ts and then mount corresponding DV batteries see details in Optional Battery Mount 3 DC 12V IN Connect with DC12V power adapter Please mind the polarity as OC C O 4 HDMI HDMI input 3 Input Formats Input Supported formats 480i 576i 480p 576p 1080i 60 59 94 50 720p 60 59 94 50 1080p 60 59 94 50 HDMI 4 Menu Operation Press MENU and it will display menu system gt Revolve OK to select an item The selected item will be highlighted display gt Press OK to enter the selected item gt Under menu system press MENU to back to previous menu gt The menu will automatically save and quit if it remains idle gt 5 Picture Settings Submenu The Picture Settings Submenu includes 1 CONTRAST 0 100 value adjustment 2 BRIGHTNESS 0 100 value adjustment os 3 HUE not available on this model 4 SATURATION 0 100 value adjustment 5 SHARPNESS 0 100 value adjustment 6 CLR TEMP Color temperature selection Normal 6500K Warm 4500K Cool 9300K 7 PIC MODE User defined and preset picture modes EXIT standard soft and vivid selection 6 System Config Submenu The System Config Submenu includes 1 BACKLIGHT LCD backlight brightness adjustment value 0 100 2 RATIO Select 16 9 or 4 3 to adjust the aspect ratio 3 SCAN UNDERSCAN and OVERSCAN selection 4 ZOOM OFF ZOOM1 and

Download Pdf Manuals

image

Related Search

Related Contents

Agilent Graphite Tube Atomizer GTA 120  

Copyright © All rights reserved.
Failed to retrieve file