AG810 - Basket Stretcher
Contents
1. is conform with the MDD 93 42 EEC C lt We hereby that the basket stretcher AG810 a e General information page 2 Operating instructions page 3 5 Warning page 2 Maintenance page 5 Device description page 3 1 GENERAL INFORMATION 1 1 USE AND CONTENTS This manual was written to give the Clients all the necessary information for using the device correctly and in the safest possible way It contains Technical data instructions for Use Maintenance information on spare parts and Safety guides 1 2 PRESERVATION OF USER S MANUAL This User s Manual must be stored near the product protected from anything which could compromise its integrity and legibility 1 3 SYMBOLS USED SYMBOLS MEANING NOTES 1 4 REQUEST FOR SERVICE For any information concerning use installation and maintenance contact CSG The users must to read this manual carefully paying special attention to safety precautions and operating instructions 1 5 DEMOLITION Follow laws in force 2 1 GENERAL WARNING e The device must not be tampered with CSG declines any responsability for incorrect operation or damages to others caused by unauthorised alterations e Inspected the device regularly perform the prescribed maintenance to keep it in good condition for safe operation and long life e Never alter or modify the device to fit the emergency vehicle Modification can cause unpredictable operation and possible patient or operator injury e If at2. instructions described in the maintenance paragraph and subsequently put the stretcher away 4 5 TROUBLESHOOTING CHART PROBLEM CAUSE ACTION Put the stretcher out of use Damages to the structure improper use immediately and contact the manufacturer Put the stretcher out of use improper use immediately and contact the manufacturer Damage to the perimetral rivets 5 MAINTENANCE 5 1 CLEANING Clean the external parts with a sponge and scap use a mild detergent dry with a soft doth or deer skin The mattress can be cleaned with water and scap and disinfecting with an ordinary quaternary disinfectant Failure to carry out regular cleaning operations can result in risk of cross infection due to the presence of residues on the stretcher platform 5 2 MAINTENANCE Periodical and correct maintenance guarantees the durability of the stretcher When first using the stretcher establish a maintenance programme which includes periodical checks and identifies a person in charge Checks to be effected before starting to use the stretcher e Integrity and functioning of the stretcher e State of wear and tear belts mattress e Eventual unblocking of the perimetral rivets 5 3 GENERAL OVERHAUL The device does not require programmed overhauls or interventions
3. any time the devices does not operate properly take it out of service immediately until adjustment repair or replacement can be made e Make sure to protect yourself to avoid the danger deriving from contact with blood or body fluids e Use the device only as described in this manual 2 2 SPECIFIC WARNING e Follow the operations approved by the Emergency Medical Service for the locking and the transport of the patient because failure to immobilize correctly can cause serious damage to the patient e Do not use without the necessary training e Use of the stretcher requires two physically adapt operators e The patient must always be immobilised on the Shell stretcher e Do not operate if the weight is not evenly distributed e Do not leave patients unattented on the device e The device must not be exposed nor get in contact with thermical sources of combustion and flam mable agents e Do not exceed the maximum loading weight as indicated in the instruction Manual 2 3 PHYSICAL REQUIREMENTS OF THE OPERATORS AG810 Shells are exclusively meant for professional use Rescuers who use it must have the following requirements e be physically capable of using the stretcher e be able to grasp the stretcher firmly with his her hands e have sound muscular co ordination 2 4 MISUSE OF PRODUCT AND COLLATERAL EFFECTS If use by trained personnel who are aware of the standards of emergency rescue and first aid this type of device does no
4. e Take the materials out of the carton and display them in a visible and neat manner e Check the integrity of all parts e On opening the packing and before each use check the rivets of stretcher assembly e Install the belts to the perimeteral cords as shown in the figures Before using the stretcher always check the following e Is the perimeter chord tight enough e Are the restraint belts for immobilisation of the patient in the box e Is the footrest in the box If everything is regular the stretcher is ready to be used In any case should the stretcher appear to be unfit for safe and correct functioning it is necessary to PUT IT OUT OF USE until repairing or replacement of the damaged parts is carried out 4 3 USE OF DEVICE e Follow the operations approved by the Emergency Medical Service for the locking and the transport of the patient e Read the instructions carefully and practice with an empty stretcher before regular use Putting the patient in tthe stretcher e Place the stretcher as close as possible to the patient before transfer e Load the traumatised patient using the adequate immobilisation devices spine board vacuum mattress Ren Fixing the footrest e Fix the footrest at the correct level so that the plane surface of the footrest is in contact with the patient s feet thus avoiding longitudinal moviments inserting the hocks at the ends of the belt in corrispondence of the oval shaped hole of the Griffl
5. och Shell handle loop e Make sure that the footrest is correctly centred in the belts so that it is at a right angle in relation to the stretcher The flat surface of the footrest should be in contact with the patient s feet Gurt Lifting the stretcher with the patient e Secure the patient to the stretcher with 3 restraint belts provided e Check that the belts are not too tight e The operators must position themselves at either end of the stretcher one at the foot end and one at the head end e Employ the correct lifting technique to avoid strain the operators must grasp the handles firmly at each end then lift the stretcher Loading the stretcher onto an ambulance or other special vehicle e Position the stretcher into the apposite space Purely indicative design Unloading the stretcher from the ambulance e Free the stretcher from any fixation system e Grasp the stretcher from the handles and extract it from the vehicle Transportation on steep terrain e Position the footrest at the adequate level to avoid movement of the patient e If the patient has wounds in the lower body immobilise the legs with adequate devices and secure the patient to the Shell e Secure the stretcher with a static safety system before lifting or lowering it e Always assist the patient whilst manoeuvring 4 4 END OF USE Once transportation of the patient is concluded you must clean the stretcher by following the cleaning
6. t present peculiar misuse of product or collateral effects 3 DESCRIPTION OF THE DEVICE 3 1 INTENDED USE The stretchers are meant for the recovery and transport of patients and can be used in any type of rescue operation to protect the patient from lateral collisions and where it is impossible to reach the casualty with ordinary means of transport This device can be used for helicopter transport The patient must not intervene on the device 3 2 MAIN COMPONENTS Basic in high density Polythen PE Mattress Q D Feet Rest 3 Immobilisation Straps Perimetric Rope UW BRWNe 3 3 TECHNICAL DATA TECHNICAL DATA TECHNICAL DATA vox wien 20mm whan 3 4 ENVIRONMENTAL CONDITIONS Both during use and stocking from 20 C bis 60 C 4 OPERATIONS 4 1 TRANSPORT AND STOCKING Before effecting transport of the device make sure it is packed adequately and that the risk of bumping or falling of the parcel is minimised When stocking do not place heavy materials on top of the stretcher the stretcher must never be considered as a resting table for any type of material Keep the original packing carton for any future transportation of the device Damages caused by transport and handling of the device are not covered by the warranty Repairing or replacement of damaged parts is at the Customer s charge The Shell must be stocked in a dry humidity free environment 4 2 PREPARATION When you receive the product
Download Pdf Manuals
Related Search