GPSWatch User Manual
Contents
1. and Disable By default the Internet Usage preference is set as Enabled 7 3 Backlight Mode This options allows you to set whether the backlight has to be permanently on or on only when active As mentioned it has two options namely Permanent ON and On when Active Permanent ON will keep the backlight on constantly even when you leave the application unattended On when active will keep the Backlight ON only when you use the application and will stay for default time as set in the phone Differs for different phones and subsequently gets off when left unattended Copyright NTERCHAIN Solutions All rights reserved 7 4 Autoconnect This option allows your application to get automatically connected to the previous device Blue Tooth GPS Receiver that you have connected with the application on your last run Just invoking the Connect option from the main menu will get you connected to the previously connected BT GPS Receiver 7 5 Compass Mode This option allows you to dampen the compass to reduce the precision This dampening should enabled when you move with a slow speed usually walking to get the correct reading of the Compass When you move with a faster speed you can disable the Compass Dampening By default the Compass Dampening is disabled 7 6 Menu Style This option allows you to switch menu style between System Menu and Custom Menu but this change will come to effect only when the application is restarte2. invoke this option you will get an option called continue in order to continue with existing folder that is previously set lt Empty gt by default and change option to change the map folder to a new location as shown in figure below Figure Map Folder Setting This option gets you inside the file system which may result in some security prompts Give yes to them and proceed to set the Map folder and finally give OK to set the New Map Folder Now your application will take the Maps from the selected folder and avoids downloading the maps from map providers 8 2 Forced GPS Address For certain phones or PDAs the Bluetooth connectivity with a GPS Receiver needs a predefined address So such phones can be connected to the BT GPS Receivers using this option Here you can mention the address that you need to connect to a BT GPS Receiver as shown in figure below comm rfcm baudrate 21500 Figure Forced GPS Address Setting Copyright iNTERCHAIN Solutions All rights reserved 8 3 GPS Mode This option allows you to select between Inbuilt GPS Provider Receiver and Bluetooth GPS Provider Receiver Some phones have the facility of Inbuilt GPS Receivers in them for those phones you can choose the option between Inbuilt GPS and Bluetooth GPS This is shown in the figure below Inbuilt Figure GPS Mode 8 4 POI Image Folder This option helps you to set the Image folder for the images that
3. you capture during Waypoint Capturing with Photo Capture Enabled in Preferences If this is not set the default location would be set as e GPSWatch Copyright iINTERCHAIN Solutions All rights reserved 9 Using the Offline Map Downloader The Offline map downloader is an executable Java Archive JAR file that can be used to download maps on to one s personal computer which can then be used to store cached maps on the mobile phone that runs GPSWatch Usage Once the JAR file has been downloaded open the JAR file using Java Runtime Environment Once opened select a specific map provider Google Yahoo Amazon etc After selecting a particular zoomed in region click on Lock location and drag on the map which would provide a red rectangular region that has been selected on the drag option Once the region has been selected select a start and end zoom level export location in your local machine and then click on Export Once the export operation is complete files to be cached on to the mobile application can be retrieved from the location specified Map Panning Area gt ia AN tH ido Nandyal lt r 0 92 Hospet ae A vd h Siad Y o Proddatur Ka rnataka 2 a gt arene CL Ws he Hindupur Pr es De da 4 dada Unlock Location Google Maps Maps Zoom Level Start Export Location Export Exit Figure Map area selection Copyright iNTERCHAIN Solutions All r
4. 815 32654 Copyright NTERCHAIN Solutions All rights reserved 4 2 Satellites This option gets the details about the GPS Satellites that are currently visible for the GPS Receiver and communicating with them The Darker shade of green color indicates that the signal from that particular satellite is high and vice versa At the bottom there are three values displaying the Dilution of Precision DOP Values that are sent to the GPS receivers P indicates Positional V indicates Vertical and H indicates Horizontal This is shown in the following figure h il PSW Satellites S DOP P15 V1 2 HO9 www i10n com Figure Satellite Report Now let us move to the next option in Main Menu Stats Copyright NTERCHAIN Solutions All rights reserved 5 Stats This option gives you interesting statistics that a user would expect in a GPS Application Invoking this option will display a sub menu containing 3 options namely Distance Speed and Altitude as shown in figure Figure Stats Sub menu Now let us move to the next option in Stats Distance Copyright NTERCHAIN Solutions All rights reserved 5 1 Distance This option gives statistics based on distance Here you have the report containing the Distance Covered by you right from the Applications connection to the GPS Receiver till the place where you are currently pr
5. GPSWatch User Manual Product Version 3 0 http www gpswatcher com Copyright NTERCHAIN Solutions All rights reserved Table of Contents T Getting A Y 4 E ated eat pe oes IG 4 1 1 B fore Yo BC A O 4 1 1 2 Installing on Phone using your Pla ia 4 1 1 3 Installing over Blu a cet dndatneSiouMePutne pitshaanei tins ndetitenSedutSee tie 5 Wee For Smart Phone Se ie cates a ion uae eb oa Canes 5 ELLA PA US EA E A E E N 5 1 1 4 2Windows Mobile USCIS s iion lali laa 5 1 1 4 2 1 Enabling JSR 75 File System Support in J9 JVM For Windows Mobile users 6 1 1 4 3 Installing GPS Watch Plus in IBM csi lie ie 6 1 44 Paine your GPS Receiver a a A a AE R 6 1 1 5 Phone specific installation prOCE dina aaa 6 a Ericsson A A irei i aaisa i eae 6 11 53 Motorola PHONES iii ds a a A n saat 9 1 1 5 4 Siemens Inbuilt GPS Phones aceucssncosssasaaansceresvesnsneesescanncoeyes sarcordspeavenueaeesmeatbucedes 9 L2 Using GPS Wate Plus A as 10 ES Moving Oda Ana 11 1 4 In Built GPS Receiver Connection Establishment Procedure ooooccnccnnocinocononcconcnconccinncnnonos 12 1 5 Bluetooth GPS Receiver Connection Establishment Procedure oooonoccnnoccnocaconcciononanncnanaconccnnos 13 DZ NAVIA IN aa 13 2 1 Special Features Available in Navigate Report cccccccccesccesscesseceseeeseeceseeeseeceseeeseeeneeenaeenes 14 2 2 Options Available in Navigate Reporta A da 14 Fe COMP ASS iss A OT 17 A TOCA A OS 19 All POSION a tees tate Neel c
6. Loader for the phone Using moto4lin you can edit the seem table and enable the flag http www planetmotox net motox101 v3_seem_table htm Then it is just a simple case of copying the jad jar files across to flash and selecting GPW Triggering the JAL enables windows users to use the program to manage the midlets for them moto4lin doesn t do that but seeing as I have direct access to the file system instead it doesn t bother the user Courtesy D LoCascio Copyright iINTERCHAIN Solutions All rights reserved 1 1 5 4 Siemens Inbuilt GPS Phones In order to install Java applications on one of the BREW devices of BenQ Siemens you need a Windows based software named Java Midlet Installer or short JMI This software can be downloaded free of charge at the software section on www BenQmobile com To be redirected to the section of your phone add a slash and the device s name e g www BenQmobile com SXG75 After extracting the software you can start it and connect your mobile phone to the data cable After some seconds the application should state in the right part of its screen that the phone is connected If the phone isn t recognized check connection with the Mobile Phone Manager which ships with your phone and can be downloaded on www BenQmobile com SXG75 in the support section For other mobile phones just type your mobile phone s name If you haven t installed the MPM your system may just lack the necessary drivers Choose which t
7. Rate This option allows you to set the sampling interval in seconds 5 3 3 Clear Data This option clears all the data related to altitude from the graph displayed Now let us move to the next option in Main Menu Data Copyright NTERCHAIN Solutions All rights reserved 6 Data This option mainly deals with data that has been saved by the Application on phone This option has the following sub menu contents as shown in figure Manage POI Import Data Export Data Clear Data Manage POI Figure Data Menu Now let us move to the options available in Data 6 1 Manage POI Here in this option you can manage the Point of Interest Data that you have collected previously When this option is invoked you will get the list of categories which in turn displays subcategories on invocation This gets you to the Point of Interest that you have stored under this category and sub category There you can find the Point of interest that you have stored its name and other details related to that Point of Interest Copyright NTERCHAIN Solutions All rights reserved 6 2 Import Data Invoking this option will prompt you to select the location of the file to be imported on phone memory memory card You may get security alerts accept them 6 3 Export Data Invoking this option will prompt you select the type of file to be exported the format of the file then it will prompt you to select the destination in
8. a tc A E 20 AU DS UNAS sect Nae ease carte ats av acc lca eect Ova oem ea cease SMU wre ee en ale loa 22 A 23 LP A A a ies 26 O O ESI REPEAT ERE TONLE SR RATS ED 27 o O 30 6 l Manage PO Lo Ai 30 6 2 pot Dat es 31 SDa D E e E E E E A E A E T 31 6 3 1 Export Ipod ao Rada 31 6 3 2 Exporting amp Importing GPX Dalai ai 31 CAC Data nori e a A A A AA AAA 31 Te DEC S ad 33 ELA e la AS DNS oa 34 TS Backlight MOS 25 aa20 ssa scien tenctcasl cactevlansiess ae e a A sutstion Slam E ERSA 34 Ag AMIA va ue luce elena A dd 35 Pied Compass Mo de ar ascii Tee Seca ol ci Cacia Bee ua nee A A eee ISA 35 DS IMT SYNC AN 35 TT Photo Ca ptre A SN 35 Copyright iNTERCHAIN Solutions All rights reserved 8 Settings o nn A 36 AS ANS 36 8 2 Forced GPRS AUS a ia teuahueersaancensadaer 37 8 4 POL Image Folderi einna ir tt dat aa a a han i a Dto 38 9 Using the Offline Map Downloader sseessosssoessscessoeessesssesssosssoessoosssoesssesssosssoesssossssesssssssssssse 39 Copyright iNTERCHAIN Solutions All rights reserved 1 Getting Started Here you get a comprehensive step by step by step procedure to operate GPSWatch Plus Application with ease 1 1 Installation 1 1 1 Before You Begin Point your phone s WAP browser to www gpswatcher com ota and follow on screen instructions to download the full application Alternatively if you have any difficulties installing GPSWatch via your phone you could hit www gpswatcher com ota o
9. d O Cormect Navigate P tion Satellites Compass Stats Data se 0 0 Dst 0 0 mi each Dst 0 0 min gt Preferences gt Settings Option J www i10n com Exit Figure Custom Menu 7 7 Photo Capture This option when enabled allows you to take photographs while capturing Way Points Available only in selected phone models For those phones which do not have this option to take pictures you can still get a way point by disabling this option Now let us move to the next option in Main Menu Settings Copyright iNTERCHAIN Solutions All rights reserved 8 Settings The Settings option allows user to manipulate the application in a more customized manner The options available under settings are Location Broadcast Map Folder Forced GPS Address Proxy Settings GPS Mode and POI Img Folder Map Folder Forced GPS Address Figure Settings Menu 8 1 Map Folder This option helps you to set the Map Folder for the application instead of getting them through GPRS on the move which will reduce your GPRS cost You can Use the OMD Tool and download the required maps and save them in a folder Copy the folder to your phone and use this option to set the application to read from the folder Copyright iINTERCHAIN Solutions All rights reserved By default the Map folder will not be set to any location When you
10. e the particular Point of Interest If you have enabled the camera option in the Preferences gt Photo capture in the Main Menu then you can take a picture of the Point of interest and store it along with its name Once the Way Point is Stored you will get an image on the Map where you captured the way point and when you click on the image Touch Screen Enabled Phones or when you move the Screen centre on to the image you will get a blurb which shows the Name under which you stored the Point of Interest and if you have taken a photo of the Point of Interest it would also come in the blurb as a thumbnail image 2 6 Maps Hide Show This option helps you to hide the maps when not needed by you and to display Maps when they are made hidden by you When the maps are displayed this option would be Maps Hide and when this option is chosen the Menu Content changes to Maps Show 2 7 Waypoint Hide Show This option helps you to display the way points and hide your way points whenever necessary This is also a context sensitive button whose name changes according to the context i e if waypoints are displayed it will show the menu content as Way Point Hide and vice versa 2 8 Choose Active Trace This option helps us to choose the required Trace record to be viewed If you have traced many routes and if you want to view a particular one you can choose this option This will show the list of Trace Record Names that you have
11. enu Choosing the option Menu Back will take you to the Main Menu The main menu has the following list of options as shown in figure Other options of Navigate Report will be discussed later Figure Main Menu Copyright iINTERCHAIN Solutions All rights reserved At first to work with the application you must connect your phone with the GPS Receiver which can be done by choosing the option Connect from the Main Menu 1 4 In Built GPS Receiver Connection Establishment Procedure 1 In the case of GPS Enabled phones for eg Nokia N95 select Settings gt Forced GPS Address and type the following comm com6 baudrate 9600 or comm rfcm baudrate 9600 This is used to configure the Bluetooth port 2 Now Location provider has been connected on your GPS enabled phone If your phone doesn t have an In Built GPS facility and if you have the Bluetooth GPS Receiver then follow this procedure 1 5 Bluetooth GPS Receiver Connection Establishment Procedure 2 Enable Bluetooth on your phone before opening the application 3 Open the application and click Connect the application will now search for all the BT devices in your vicinity and display them Ensure that BT GPS Receiver is powered on 4 Now select the GPS Receiver in the list and select OK Some phones prompt for a security alert while establishing Bluetooth connection click yes for the prompt if any And there you go you are now connected and now y
12. esent It also gives the Air Distance covered by you Apart from the distance data you also have 3 Stage Odometers for calculating distance traveled The following figure shows the Distance Report DistConvered 0 0070 mi AirDistance 0 0060 mi www i10n com Figure Distance Report Now let us see the options available on the Distance Report Distance Report has 5 options namely Menu Back Reset Air Distance Reset ODO 1 Reset ODO 2 Reset ODO 3 as shown in figure DistConvered 0 0 mi AirDistance 0 0 mi ODO1 0 0 mi la Menu Back 42 Reset Air Distance Figure Distance Report Menu Copyright iINTERCHAIN Solutions All rights reserved 5 1 1 Menu Back This option gets you back to the Main menu 5 1 2 Reset Air Distance This option resets the Air distance back to zero for a fresh record to be calculated 5 1 3 Reset ODO 1 2 3 This option helps you to reset the odometers for calculating fresh ODO Records Now let us move to the next option in Stats Speed 5 2 Speed This option gives you the statistics based on Speed This report gives you the details like Current Acceleration Max Acceleration Max Speed Min Speed and Average Speed As shown in figure CurrAccel 1 5 mi s2 MaxAccel 1 5 mi s2 CurrSpeed 9 6 mi hr 0 0 mifhr 6 mishr www i10n com Figure Speed Report Now let us see the options availab
13. eserved 4 Location Choosing this option will get you to another sub menu containing two options namely Position and Satellite as shown in figure ke E Figure Location Sub Menu Copyright NTERCHAIN Solutions All rights reserved 4 1 Position This option gives you the details of latitude longitude Altitude of the current position and it also displays the Current Time and Date as shown in the figure Lat 45 62093 Lon 9 30037 2006 May 06 08 06 24 www i10n com Figure Position Report The format of the Latitude and Longitude values can be changed for more customized view of the report For this purpose the Position report has the following options it its menu as shown in figure below Position Report has 5 options namely Menu Back DD dddd DD MM mmm DD MM SS OSGB36 as shown in figure Figure Position Report Sub Menu Copyright NTERCHAIN Solutions All rights reserved 4 1 1 Menu Back This option gets you back to the Main menu 4 1 2 DD ddddd This option gives the Lat Lon Values in a format similar to this Lat 45 45109 Lon 9 98125 4 1 3 DD MM mmm This option gives the Lat Lon Values in a format similar to this Lat 45 36 596 Lon 9719 594 4 1 4 DD MM SS This option gives the Lat Lon Values in a format similar to this Lat 45 36 35 Lon 9 19 32 4 1 4 OSGB38 This option gives the Lat Lon Values in a format similar to this ZX
14. f speed display depends on the Unit choice that you choose from the Settings gt Distance Units choice in the Main Menu Copyright INTERCHAIN Solutions All rights reserved 2 2 Options Available in Navigate Report Here we can see the features available on the Navigate Reportf Map Screen When you click the Menu button on the right bottom it will give you a set of options available for you in the Navigate Report As shown in figure Menu Back Current Location Capture POI Maps Hide Waypoints Hide Choose Active Trace ace Star Set Trace Precision Wikimapia Show Map Provider Zoom In Zoom Out Figure Navigate Report Menu Remaining Options Copyright INTERCHAIN Solutions All rights reserved Now lets see in detail what are all the choices that are available in Navigate report Options 2 3 Menu Back This option will take you back to the Main Menu 2 4 Current Location This option helps you to move your display view to your Current Location For example if you have moved on the map to a different position to see the in and around places and if you want to come back to the existing place where you are you can use this option 2 5 Capture POI This option helps you to capture a Point of Interest For example if you come across a place and if you want to mark that place for future reference you can choose this option This will open a category list and a subcategory list under which you can stor
15. file system where it has to be exported Then you must choose your data which has to be exported 6 3 1 Export amp Import Trace points 1 This feature enables you to have a text output of the points in radians that represent the route you traced on Trace Route report 2 Select import or export and follow instructions similar to loading map or exporting KML files Basically selecting the folder and then the file 6 3 2 Exporting amp Importing GPX Data 1 This feature enables you to share trip data with other GPS Receivers and PC based GPS applications The instructions for using this feature are similar to the tracepoint import and export 2 For more information on GPX data visit www topografix com gpx asp 3 The maximum size of the GPX data file that the application can handle depend upon the device capability 6 4 Clear Data This option is mainly used for clearing the stored data from the phone This option has the following sub options as shown in figure below Selected TraceRecords All TraceRecords Figure Clear Data Options Copyright iINTERCHAIN Solutions All rights reserved 6 4 1 Map Cache This option helps to clear the Map cache for a fresh collection of map data 6 4 2 POP s This option helps to clear the POI Data that you have collected using the application completely from the phone 6 4 3 Selected Trace Record This option gives you the list of Traces that you have made using the ap
16. ights reserved Once an area has been locked for selection the zoom and panning options are disabled This allows a user to select a desired region with ease An area selected by clicking on lock location can be erased by clicking on unlock location Maps can be panned by clicking on the map panning area and dragging Zoom in and zoom out buttons are available on the right hand side of the map Note Please select small size area for downloading maps at a high zoom levels lt 8 levels because the map size will explode if you choose a large area causing problems with application because of memory constraints So probably you can download in two stages selecting little larger area for zoom levels 8 15 smaller area for higher zoom levels lt 8 and very small area for very high zoom levels lt 4 Also the value of start zoom level should be lesser than or equal to the value of end zoom level Copyright NTERCHAIN Solutions All rights reserved For technical queries or questions regarding GPS Watch we request you to make utilization of the Forum Community feature in our portal For other queries contact us at support il0n com Copyright iINTERCHAIN Solutions All rights reserved
17. le on the Speed Report Copyright INTERCHAIN Solutions All rights reserved Speed Report has 5 options namely Menu Back Reset Avg Speed Reset Max Speed Reset Min Speed Reset Max Acceleration as shown in figure CurrAccel 0 0 mi s2 MaxAccel 4 4 mi s2 CurrSpeed 0 0 mishr m4 Reset Min Speed 5 Reset Max Accel Figure Speed Report Menu 5 2 1 Menu Back This option gets you back to the Main Menu 5 2 2 Reset Avg Max Min Speed This option resets the Average Speed Max Speed and Min Speed for fresh data collection on speed 5 2 3 Reset Max Accel This option resets the Max Acceleration for fresh data collection of Acceleration Now let us move to the next option in Stats Altitude Copyright NTERCHAIN Solutions All rights reserved 5 3 Altitude This option gives you the statistics based on Altitude This report gives you the details on Current Altitude in the form of a graph As shown in figure mins o Ea f0p com Figure Altitude Report Altitude Report has 3 options namely Menu Back Set Sampling Rate Clear Data as shown in figure 1 Menu Back 2 Set Sampling Rate 3 Clear Data mins 30 Figure Altitude Report Menu Now let us see the Altitude Report options in detail Copyright iINTERCHAIN Solutions All rights reserved 5 3 1 Menu Back This option gets you back to the Main Menu 5 3 2 Set Sampling
18. n your computer Please note for security reasons download is limited to only once from the website If you have any trouble please revert contact us at support il0n com so that we can enable the download link once again 1 1 2 Installing on Phone using your PC If you have any difficulties installing GPSWatch Plus via your mobile phone you can install GPSWatch Plus over your computer by following these step by step instructions First point your browser to http www gpswatcher com ota Authenticate yourself 1 Right click the unsigned download link and click Save As option to get GPS WatchPlus JAD file to your Computer 2 Open the JAD file with text editor and you will find a property MIDlet Jar URL for example MIDIet Jar URL http www gpswatcher com ota trial unsigned GPS WatchTrial jar or Copyright NTERCHAIN Solutions All rights reserved MIDIlet Jar URL http www gpswatcher com ota GPSWatchPlus jar uid bb0c65c4 7bb8 Afal 8ccc 6b 1 5bf6a59c00ddc85f8 9f28 4fc7 9b 1 0 d1b262013d0cad24a48e d18c 400b 98f8 767 1fa4489f8 3 Get the URL alone for eg http www gpswatcher com ota trial unsigned GPS WatchTrial jar and paste it in your browser This will download the JAR file to your computer Now that you have the JAD and JAR file follow one of the following processes to install the application on the phone 1 1 3 Installing over Bluetooth Send the downloaded JAR file via bluetooth to your mobile phone and the a
19. o complete If the jar file has not been associated with Nokia PC Suite you need to 1 Connect your mobile as you regularly do bluetooth irda serial whatever 2 open the PC Suite 3 Click on Install Application 4 Select GPSWatchP jar 5 Wait for the installation to complete The program will end up in Programs Collection as GPSWatchPlus Once it is installed you may want to setup the permissions 1 Go to Programs Collection and put cursor on GPSWatchPlus 2 Select Options gt Application access gt Phone Access gt Read user data gt Always allowed 3 do the same for Write user data N95 Use PC Suite or 1 Edit the previously downloaded JAD file and replace MIDlet Jar URL property as MIDlet Jar URL filename jar For eg MIDlet Jar URL GPSWatchPlus jar Copy GPSWatchP jar and GPSWatchP jad to the phone In the phone use File Manager to browse to GPSWatchP j ad Select it to start Installer and install the midlet Once installed go to Tools gt AppManager gt open GPS WatchPlus and set Always allowed for Read user data and for Edit user data 6 That s it aA UU N 1 1 5 3 Motorola Phones The simplest would be transferring the application over Bluetooth If your phone has the application installation feature locked then follow the instructions below to install GPSWatch In order to install Java apps from the file system such as in development you need to enable JAL Java Application
20. ong with jar to Memory card Don t place the files under any folder in the memory card Start the IBM J9 Java emulator Press install and then you have to enter the following file storage card GPSWatchPlus jad Phew you are done 1 1 4 4 Pairing your GPS Receiver 1 Go to Bluetooth and add GPS device to the paired device list 2 For the Bluetooth device add an outgoing COM Port using ports tab For e g COM6 3 Now open GPSWatch and navigate to Settings gt Forced GPS and type comm com6 baudrate 9600 4 Phew you are done now go back to the main menu and click connect Make sure your BT GPS is turned on 1 1 5 Phone specific installation procedures 1 1 5 1 Sony Ericsson Phones In general applications can be installed either by copying the jar and jad files to phone memory or memory stick and invoking the application from the file manager in the phone Copyright iINTERCHAIN Solutions All rights reserved 1 1 5 2 Nokia Phones Installation on Nokia phones by pointing the browser to the aforementioned address Welcome AA Logout GPSW atch Downloads Full Version Unsigned Trial Version Signed Trial Unsigned Trial Figure Once Successfully Logged in Copyright INTERCHAIN Solutions All rights reserved To install GPSWatch Plus using Nokia PC Suite do the following 1 Connect your mobile phone via bluetooth irda serial whatever 2 Double click GPSWatchP jar 3 Wait for the installation t
21. ou will be back in the main menu We are done now the connection has been established with the location provider GPS device The GPS Receiver signal strength will be displayed on left top corner of the display Now let us see the functionalities of other options available in the Main Menu Starting off with Navigate option Copyright iINTERCHAIN Solutions All rights reserved 2 Navigate Navigate Your Way GPSWatch Plus Map In order to go to the maps just go the option Navigate in Menu If you re using a signed version of the application and if for the first time you are accessing the Internet then the application will prompt for your permission to access the Internet in order to download the maps otherwise in the case of the unsigned version permission needs to be granted each time Once you are inside the map you can spot your self on the Map Your location will be marked as a Red Arrow This Map Screen is called the Vavigate Report as shown in the figure Figure Navigate Report 2 1 Special Features Available in Navigate Report 1 On the right top corner you will have your Touch Sensitive Zoom control Touch Operations available only in Touch screen enabled phones This control helps you to zoom in and zoom out with the swipe of the stylus over it 2 On top of the Zoom Control we have the Map Scale displayed in Kilometers 3 At the bottom of the screen we have the Current speed display The unit o
22. plication and you can choose a particular trace record and delete that particular record from the phone 6 4 4 All TraceRecords This option helps to clear all the trace records that you have collected using the application Now let us move to the next option in Main Menu Preferences Copyright NTERCHAIN Solutions All rights reserved 7 Preferences This application has a set of Preferences that can be set for making the application more customized Let us see the options available under the option Preferences The options available under Preferences are Distance Units Internet Usage Backlight Mode AutoConnect Compass Mode Menu Style and Photo Capture as shown in the figure below Figure Preference Options Now let us see the descriptions of each option available under Preferences Copyright NTERCHAIN Solutions All rights reserved 7 1 Distance Units This option is used for setting the choice of unit that you may like to see for the entire application It has two sub options namely Metric and English as shown in figure By Default Metric is chosen Metric Figure Distance Units Choice Metric units refer to all SI Units and English Units refers to non SI UK Units 7 2 Internet Usage This option allows you to decide whether to make the application internet enabled or not It has two options namely Enable
23. pplication will get installed on to your phone 1 1 4 For Smart Phone users 1 1 4 1 Palm users Download and install a fully maintained IBM J9 directly from Palm for free of cost including the JSR 75 file I O framework 1 1 4 2 Windows Mobile users 1 Get IBM J9 for your phone a Goto the IBM Websphere page b Enter registrar il0n com as IBM ID and guestuser as Password c Download the Executable file of one of the following versions based on your platform CLDC 1 1 MIDP 2 0 for Windows Mobile 5 0 Smartphone Edition ARM or CLDC 1 1 MIDP 2 0 for Windows Mobile 5 0 ARM 2 Extract it and move all extracted files to your pocket pc or memory card under a J9 folder Files and directories extracted lt bin gt lt doc gt lt examples gt lt lib gt copyright txt buildinfo xml 3 Go to your device to where you moved the files run EMULATOR exe which is will be under J9 bin directory Copyright iINTERCHAIN Solutions All rights reserved 1 1 4 2 1 Enabling JSR 75 File System Support in J9 JVM For Windows Mobile users 1 Download this jar from IBM Site Unzip it It contains a folder called fixed 2 Copy fixed ive 2 2 runtimes wm2003 arm midp2 bin fileconn dll into this folder on you mobile device J9 bin 3 Copy fixed ive 2 2 runtimes wm2003 arm midp2 lib jclMidp20 ext fc jar into this folder on you mobile device J9 libyclMidp20 ext 1 1 4 5 Installing GPSWatch Plus in IBM J9 l Copy the modified jad al
24. stored and you have the option to choose which trace record to view If you do a trace by selecting an existing trace record then the new trace record will get appended to your existing trace record 2 9 Trace Start Stop This option helps you to trace the route that you travel When you are traveling to a new place and want save the route you have traveled you can choose this option As default this option will be Trace Start and 1f you choose this option you will see a line being drawn along the way you take now the option would change to Trace Stop When you are done with the trace you can choose the option Copyright iINTERCHAIN Solutions All rights reserved Trace Stop which will prompt you to choose the category and subcategory under which you would like to store the Trace record Then it will prompt you to enter the Name of the trace under which you would like to refer it later 2 10 Set Trace Precision This option allows you to set the precision of the Trace that you take Precision value is in meters Metric Units 2 11 Wikimapia Show Hide This option gets you the Wikimapia maps on the screen Those who like using wikimaps for their region they can choose this option 2 12 Map Provider This option gives the users the choice between the following map providers 1 Google Maps 2 Google Earth 3 Virtual Earth 4 Amazon Maps 5 Yahoo Maps Users can choose whichever option depending on the detail tha
25. t the maps provide for their region 2 13 Zoom in 2 14 Zoom out These controls help you to zoom in and zoom out of the map according to your requirements It will zoom with Screen Center as the Point of Zooming The Current Zoom level can be found out from the position of the zoom control slider on the Navigate Report So these are the options available inside the Navigate Report Now the following documentation will give you the details on the next content of Main Menu that is the Compass Report Copyright iINTERCHAIN Solutions All rights reserved 3 Compass This Report displays a compass which tells you the direction in which you travel as shown in the figure Course 358 1 Dst 0 0 mi To Reach Dst 0 0 min E www 10n com Figure Compass Report Compass report has the following options as shown in figure Figure Compass Report Options Copyright NTERCHAIN Solutions All rights reserved 3 1 Menu Back This Option takes you to the Main Menu 3 2 Select POI This option allows you to select a Point of Interest and when you select that you will get the distance from your current location and the Point of Interest and the time in min to reach the particular Point of Interest 3 3 Reset Average Speed This option allows you to reset the average speed at which you have traveled Next we are going to see the next Main Menu Option Location Copyright NTERCHAIN Solutions All rights r
26. ype of application you want to install application or game Browse in the left part of the screen to the folder in which the JAD and JAR files of the application are and select one Click on the Install button on the right side The application will be transfered to the phone After the transfer is completed the phone needs a restart Now you can find the application in the games or application list in the menu depending on what you had selected as you installed it In case you are not able to locate the JMI installer on the support website please write to us Courtesy Stefan Copyright iINTERCHAIN Solutions All rights reserved 1 2 Using GPSWatch Plus As soon as the application loads you will get the default entry screen as the Position Report This shows the Latitude Longitude Altitude and the Current time But the next time when you open the application the entry screen would be the screen that you have closed on your previous run of the application GPSW Navigate ny Lo al dz Xx Lat 12 90278 Lon 77 63177 Back as Actions Figure Position Report Copyright INTERCHAIN Solutions All rights reserved 1 3 Moving Forward Now this section will explain the details of How to enter the Main menu their contents and their functionalities At the Right Bottom of the report you can see the Menu Button Invoking this button will give you the Menu List as shown in figure Figure Position Report M
Download Pdf Manuals
Related Search