Manual - Ambient
Contents
1. Holding left right is fast backward forward Push to select value curser jumps to next digit After finishing selecting the new value needs to be confirmed use new or the menu can be left by cancelling use old As the user bits are only displayed in this menu we added a way to exit without any changes quickly www ambient de 11 SYNC MENU AMBIENT RECORDING experience guality The SYNC menu lets you set the sync signal format type and rate Select the different settings by pushing the config switch Navigate by toggling the config switch left or right PPR selects a pulse per frame signal Used to trigger certain video cameras The PPF signal is put out on pin 3 of the Lemo TC socket and on pin 3 of the Lemo ACN socket Only the output on the Lemo ACN socket Is a timer output on Lemo TC there is a jitter of up to 2 ms For the PPF signal rate single double quad can be selected and whether it shall be a high low or low high transition Pushing the config switch selects If any changes have been selected you will be asked to confirm Pushing the config switch while old iS highlighted discards the changes and returns to the main menu Pushing the config switch while new iS highlighted will set the sync signal to the selected format www ambient de OFF deactivates any sync signal Use this if time code only is required2. 12 TC MENU www ambient de AMBIENT RECORDING experience Quality Enter the ie menu to adjust the time code frame rate MIDI time code MTC functions and time code output level for pin 5 Lemo TC Select TC for adjusting the frame rate Adjust by toggling the config switch left right push in to select new frame rate Rates 23 976 24 25 29 97 30 29 97D 30D fps D drop frame If settings are changed confirmation is required Pushing the config switch while old is highlighted discards the changes and returnsto the main menu Pushing the config switch while new is highlighted will set the time code signal to the selected rate Select MTC to control the Midi Time Code options MTCout this is the default mode The ACN TL always puts out MTC unless the USB port is set too COM see SYS gt Config gt Lemo ACN gt USB The Lemo ACN Socket switches to USB whenever a5 Volt USB power is recognized MIDI gt LTC MTC received through USB will be converted into LTC and put out on both Lemo sockets pin 5 LTC gt MIDI LTC received on Lemo TC pin 2 will be converted and put out as MTC via USB 13 RECORDING experience guality TC gt Level Select Level to adjust output level on Lemo TC The adjustable range is from 45 dB to O dB Default level is O dB This equals 3 Vpp without load or 1 5 Vpp or 0 dBu into 1 K Ohm Select by toggling left right select by pushing in th
3. out on the time code output of the slaves as well as on the output of the unit that is in TCext This feature makes it possible to remotely start and stop recording of audio recorders cameras and video recorders which support being triggered by time code As in JAM mode the network channel needs to be set first when coming from OFF condition but can be changed any time Other available settings are selection of internal or external antenna activating LNA and setting the output power of the wireless module PIN is required for external antenna use and higher output levels EXIT Exits to the main operation screen www ambient de 18 AMBIENT RECORDING experience Quality 8 LED Indications As used to from former devices of the Cockit Time Code family the ACN TL has a red and a green flashing LED to display operation and battery status O 1 2 3 4seconds e e e e red flashing in 1 second intervals running but not jammed or set e e green flashing in 1 second intervals running jammed or set manually This is the normal operation mode Y ee red double flash every 2seconds battery low not jammed or set oo ee green double flash every 2seconds battery low jammed or set 00 00 00 00 red double flash every second TC video not sync not jammed or set 00 00 oo 00 green double flash every second TC video not sync jammed or set The double flash on every second
4. 2 MHz out DC IN 6 to 18 Volts pin5 LTC OUT adjustable output level Lemo ACN Lemo series OB 5 pin matching connector FGG JGG 0B 305 CLADxx 1 pin 1 ground 2 5 pin 2 LTC IN USB 5V Input pin 3 ACN USB D RS232 TX Event Switch to Pin 4 GPO w General Purpose Output TTL pin4 ACN USB D RS232 RX Event Switch to Pin 3 GPI General Purpose Input TTL pin 5 LTC OUT 3 3 Volts DC OUT ow A Lemo ACN remarks e GPO is a timer driven output with TTL output signal 47 Ohm series resistor e GPI is atimer driven input and even a timer driven output with an open drain transistor It has configurable pull up 30k and pull down 20k resistors e The event switch has a 200 mA fuse between pin 3 and 4 Antenna SMA F www ambient de 20 AMBIENT RECORDING experience Quality 11 Warranty amp Approvals Warranty Ambient Recording GmbH warrants the TinyLockit ACN TL synchronizer against defects in materials and workmanship for a period of ONE 1 year from date of original retail purchase This is a non transferable warranty that extends only to the original purchaser Ambient Recording GmbH will repair or replace the product at its discretion at no charge Warranty claims due to severe service conditions will be addressed on an individual basis THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AMBIENT RECORDING GMBH DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING WARRANTIES OF MERCHANTA
5. AMBIENT RECORDING experience guay Clockit Timecode ACN TL TinyLockit r rP O m an tiny LOCKIT ACN TL www ambient de Rev 3 00 Ambient Recording GmbH Schleissheimer Strasse 181c Tel 49 89 3605510 0 info ambient de D 80797 Munich Fax 49 89 651855 www ambient de Table of contents 7 1 7 2 7 3 1 4 7 5 10 11 12 Introduction Package Contents Safety instructions Powering Description Setup Menu Diagram Menu Description Generator Jam TC UB Settings Sync Settings Time Code Setting System Settings ACN Ambient TinyLockit Network LED indications Firmware update Physical specifications Warranty amp Approvals CE FCC Recommended accessories www ambient de AMBIENT RECORDING experience GuaIITy page 12 13 14 16 19 19 20 21 23 24 AMBIENT RECORDING experience Quality 1 Introduction As all Ambient Clockit devices the TinyLockit provides a rock solid highly accurate temperature compensated time code generator Except for the sync signal output it comprises the full functionality of its big brother including ACN Ambient Clockit Network support metadata transfer and logging These network capabilities also allow the TinyLockit to be a fully functional generator buffered time code transceiver This provides the stability of an Ambient Lockit Generator with the flexibility of a wireless TC system but w
6. BILITY AND FITNESS FOR A PARTICULAR PURPOSE AMBIENT RECORDING GMBH IS NOT RESPONSIBLE FOR SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF WARRANTY OR UNDER ANY OTHER LEGAL THEORY Because some jurisdictions do not permit the exclusion or limitations set forth above they may not apply in all cases For all service including warranty repair please send the ACN TL along with proof of purchase date to your retailer or if not applicable to Ambient Recording GmbH Schleissheimer Str 181 C DE 80797 Muenchen Germany Please obtain a return authorization through the contact form on our website before sending in a unit www ambient de 21 AMBIENT RECORDING experience guality C CE Conformity Statement Declaration of Conformity According to ISO IEC Guide 22 Manufacturer s Name Ambient Recording GmbH Manufacturer s Address Schleissheimer Str 181 C DE 80797 Muenchen Germany declares that the product ACN TL Synchronizer is in conformity with EN 60950 1 2006 A11 2009 A1 2010 A12 2011 AC 2011 EN 300 440 1 V1 6 1 EN 300 440 2 V1 4 1 EN 301 489 1 V1 9 2 EN 301 489 3 V1 4 1 which is indicated and affirmed by the applied CE marking FE FCC Statement The FCC requires that the following statements be included in this manual for ACN TL FCC 15 19 This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 This devic
7. DING experience guality When using the wireless connection of the TinyLockit ACN TL place it centrally and keep it distant from sources of possible interference such as microwaves or electrical devices with large metal surfaces If possible always use the integrated antenna If the application of an external antenna seems mandatory only use the original part directly attached to the socket Extension or use of 3rd party accessories is not licit Never open the unit Inappropriate and unauthorized access will void the warranty and imply possible risk of harm to the user When disposing the unit follow the legal requirements for recycling electronic equipment 4 Powering The ACN TL can be powered by 2 pcs Type Micro AAA batteries Alkaline NiMH rechargeable or Li lon Set correct battery type in configuration for reliable low voltage warning No charging function for rechargeable batteries when powered from external Pay attention to insert with correct polarity as shown on label insert outer with first inner with first Push down battery hinge and close slider Or 5to18 Volts DC via pin 4 of Lemo TC socket Or 5 Volts DC via the USB socket If powered from USB USB is displayed in the upper right corner of the display instead of the battery symbol If powered from external on Lemo TC pin 4 EXT is displayed in the upper right corner of the display instead of the battery symbol Note curre
8. ENT RECORDING experience guality ANT 2 4 SMA M Antenna straight ANT 2 4 SMA M90 Antenna right angle ACNTL T Pouch for the ACN TL k m fe IE EE ead Mar m TANT ALN er tiny LOCKIT ACN TL www ambient de 25 AMBIENT RECORDING experience Gua Ty Ambient Recording GmbH 2013 Ambient Recording GmbH Schleissheimer Strasse 181c Tel 49 89 3605510 0 info ambient de D 80797 Munich Fax 49 89 651855 www ambient de
9. FF N 1x 2x 4x 4 HIGH lt gt LOW NY NO SYNC OUTPUT NY TC J FPS lt amp gt MTC Level Y FPS FPS 23 976 lt gt 24 amp 25 29 97 lt 30 29 97D 30D N MTC MTCout lt gt MIDI gt LTC lt gt LTC gt MIDI N Level TC level Lemo TC 0 dB to 45 dB NY SYS N Config lt gt INFO lt gt Factory reset N Display lt gt Lemo ACN N Display Brightness 0 lt 95 lt 10 NV AutoOff never lt gt 5sec gt lt gt 5min N Lemo ACN USB MTC lt gt COM INFO displays device information serial no firmware version mac address Factory Reset loads default settings E www ambient de 6 RECORDING experience Qualliv 7 ACN v MODE N OFF lt gt JAM lt gt TXext lt gt TCRX N 7 JAM MODE lt gt CHNL lt gt ANT lt gt PWREOSYNC MODE Back one level to mode select Mode for remote jamming of ACL 204 CHNL Select ACN channel 11 to 26 ANT Secect antenna internal lt gt external PWR Select RF output power 8 to 18 dBm SYNC Send sync broadcast yes lt gt no N 7 TXext MODE lt gt CHNL lt gt ANT lt gt PWR MODE Back one level to mode select Mode to transmit external recrun TC CHNL Select ACN channel 11 to 26 ANT Secect antenna internal lt gt external PWR Select RF output power 8 to 18 dBm N NG TCRX MODE gt CHNL gt ANTS gt PWR MODE Back one level to mode select Mode to receive free or recrunTC CHNL Select ACN channel 11 to 26 ANT Secect antenna internal lt gt external NV
10. PWR Select RF output power 8 to 18 dBm EXIT Return to main operation display www ambient de 7 AMBIENT RECORDING experience GuaIITy 7 Menu Description POWER ON OFF To turn on the ACN TL press and hold the config switch for 4 seconds To turn off press and hold the switch for 4 seconds The display will show Press switch again to power down MAIN DISPLAY The main display is the normal operation mode It displays the most important status information These are the time code momentarily running sync signal type and rate time code frame rate and various additional information UM a down left indicates the jam mode auto indicates off no external jamming available m indicates manual once I indicates external TC port open for jamming disappears while port is closed 00 00 indicates the time code offset Information related to ACN will be displayed once it is activated If the display is switched off power save pushing the config switch once will turn it on again without doing any changes Also a time code jam activates the display www ambient de 8 AMBIENT RECORDING experience guality MAIN MENU Pushing the config switch once enters the main menu screen The main operation parameters are further displayed In this screen you can select the different settings by pushing the config switch Navigate by toggling the config switch
11. accesses the Ambient Clockit Network configuration To enable ACN select the MODE In the release version of the ACN TL three different network communication modes are available JAM TXext TCRX The JAM mode allows to send a sync command to other ACN TL or ACL 204 devices or receive sync command from them This serves to remotely sync all units on the set First the menu asks to select the wireless channel The CHNL setting allows you to select between 16 network channels within the 2 4 GHz range The channel can be changed later After setting this selection of internal or external antenna is possible and powering the low noise amplifier LNA for the receiver on or off The LNA draws power so it is recommended only should the reception of data be insufficient without Default setting is internal antenna for activating the external antenna a PIN code is required If the external antenna is activated the antenna symbol on the bottom right of the display is shown LNA is shown as well PWR lets you increase the output power of the transmitter Default is 8 dBm up to 18 dBm is possible Again the PIN is required gt O Z V gt lt www ambient de 16 RECORDING experience Quality Selecting SYNC opens the screen for sending a sync command to all ACN TL or ACL 204 in reach which are on the same channel and in JAM mode Default is on no toggle to yes and push to ent
12. ce to radio communications However there is no guarantee that interference will not occur ina particular installation If this equipment does cause harmful interference to radio or www ambient de 22 AMBIENT RECORDING experience guality television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help ICES 003 This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada Tested by TUV SUD Product Service DE 94315 Straubing March 2013 Sebastian Fell Ambient Recording GmbH www ambient de 23 AMBIENT RECORDING experience GuaIITy 12 Recommended accessories ACM TL Mounting accessory for attaching the device to a 3 8 thread AHBIENT ACM FS Adapter 3 8 to cold shoe ACN USB Adapter cable USB A to Lemo Series OB 5 pin LTC OUT Epic Adapter cable Lemo 5 pin to Lemo series 00 4 pin for use with RED Epic Scarlet TC I O Adapter cable Lemo 5 pin to Lemo 5 pin for use with ARRI Alexa www ambient de 24 AMBI
13. e config switch SYS MENU The SYS menu serves to configure various parameters in this release version the display behavior and the BNC sync signal impedance are set Push the config switch to enter SYS gt CONFIG Enter the configuration by pushing in the config switch Navigate to DISPLAY or Lemo ACN push the config switch to select SYS gt CONFIG gt DISPLAY Adjust display brightness from 1 to 10 toggling the config switch left right Push in to select value The curser will jump to the Auto off settings Select after what time the display shuts off after entering the main operation display Choices are Never 5 seconds 30 seconds 1 minute 5 minutes Select by toggling the config switch left right Push in to select value www ambient de 14 RECORDING experience Quality SYS gt CONFIG gt Lemo ACN Select the function of the USB connection MTC this is the default will be recognized as generic MIDI interface and deliver time code as MIDI time code COM select to communicate with computer for updating software or transferring ACN data This mode will appear as a HID in the control panel Select by toggling the config switch left right Push in to select mode SYS gt INFO Select INFO to display information about the device Serial Number Main firmware version Mac address www ambient de 15 RECORDING experience guality ACN MENU The ACN menu
14. e may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Canada CNR Gen Section 7 1 3 This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Le present appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio exempts de licence L exploitation est autoris e aux deux conditions suivantes 1 l appareil ne doit pas produire de brouillage et 2 l utilisateur de l appareil doit accepter tout brouillage radioelectrique subi m me si le brouillage est susceptible d en compromettre le fonctionnement FCC 15 21 Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment FCC 15 105 Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interferen
15. er After sending out the sync command including time code and user bit the other units reply and the number of units which replied and were successfully synced is displayed A device that received a sync command will memorize when the sync command was received The transmitting device also memorizes the event The information is displayed when ACN is selected from the main menu There may be various reasons for a sync failed returned For time code Ifthe frame rates of sending and receiving device do not match integer vs non integer frame rates like 25 fps and 29 97 fps the sync command is rejected f OFF is selected in the GEN gt JamTC settings If jammed before is selected in the GEN gt JamTC settings and the device has already been For user bits if the GEN gt UB gt JamUB is set to manual www ambient de 17 RECORDING experience Quali ACN gt TCext TCRX TCext is a wireless transmission of external time code present on the Lemo TC input This is intended for transmitting a record run time code to another ACN TL or ACL 204 which is in TCRX mode Once progressing time code is detected the ACN TL jams to it and sends a jam command to the slaves When external time code stops a stop command is sent to the slaves If static time code value is recognized as put out by a video camera or Sound Devices recorder the time code is stopped and a static time code is put
16. expose to direct sunlight Admissible ambience temperature is from 5 to 50 Celsius Do not throw or expose to mechanical impact and keep it safe from hard vibrations Only use genuine accessories such as cables antennae etc which have been supplied by an authorized dealer Always observe integrity and the pertinent compatibility with all units connected to Do not perform software updates in situations the integrity of mains supply can not be granted such as thunderstorms and remove connections from and to all devices directly or in directly connected to mains Only use intended batteries type Micro AAA with 1 5V Watch correct polarity when inserting the batteries instructions can be found in the manual and on the device itself Disregard of handling may cause battery leakage or even risk of explosion To maintain secure electrical contact the batteries are loaded with high spring tension and can shoot out of the compartment if opened without attention Always secure the outer battery contact and release slowly when accessing the compartment Proper recycling of used batteries might mandatory be instructed by local law Please check for requirements and dispose at foreseen institutions With regard to environment only dispose completely discharged batteries When powering from external sources remove the batteries Pay attention to the use of LPS sources in compliance to part 2 5 of EN 60950 1 www ambient de 3 AMBIENT RECOR
17. is shown while invalid combinations are configured or while syncing the genlock signal to time code after configuration changes or jamming e eee eee combination of not sync and low battery not set or jammed e 000 ee eee combination of not sync and low battery set or jammed eeeeeeeeee alternating colors during firmware update 9 Firmware Update New features improvement and fixes for the ACN TL will be available for download from our website http www ambient de en products ambient recording clockit timecode tiny lockit html The firmware update comes as a executable file including the programming interface and the firmware file Connect the ACN TLto a computer running a Microsoft Windows operating system using a USB A cable to Lemo series OB 5 pin connector and run the updater Press the UPDATE button I Wait until the message update successful appears The adapter cable from USB A to Lemo 5 pin is available from Ambient recording Item code ACN USB Contact us for bug reports and suggestions through our contact form www ambient de 19 AMBIENT RECORDING experience GuaIITy 10 Physical specifications Dimensions L W H 71 5 x 56x 20 mm Weight 0 118 Kg no batteries Power consumption 70 mA 3 Volts typical Connectors Lemo TC Lemo series OB 5 pin matching connector FGG JGG 0B 305 CLADxx 1 pin 1 ground 2 5 pin 2 LTCIN pin 3 ASCIIIN OUT pin 4 Tune reference 1 9
18. ithout the fear of dropouts In addition it also offers most features of the former ALL601 such as variable time code output level for recording TC on audio track and time code conversion between LTC MTC The second Lemo connector is used for TC or communications and can be configured as USB RS232 or GP I O As known from the ACN TL the user interface is easy and intuitive to use Due to its smaller form factor the ACN TL is especially suitable for applications on small cameras but also on cameras or in setups where a sync signal is not required it is a handy solution Thanks to the machined pearl blasted and anodized aluminum body the TinyLockit can easily withstand the roughest production conditions www ambient de 2 AMBIENT RECORDING experience Quality 2 Package Contents ACN TL synchronizer Manual 3 Safety instructions For your own safety and trouble free use of your TinyLockit ACN TL please carefully read through the instructions below Always keep a copy of these instructions and hand them out with the unit to other users This unit is exclusively intended for indoor use Keep it safe and away from water rain and humidity and dry under all circumstances even when powered off Clean gently with a slightly moistened cloth and never let water detergents or liquids of any kind get into the unit as this will imply the risk of short circuits and electrical hazard Keep distant from sources of heat and never
19. left or right Pushing the config switch when EXIT is highlighted exits to the main screen If no action is done the unit will return to the main screen as well GEN MENU Inthe GENenrator menu you can edit the jam mode edit the time and set an offset of the time code output against the jammed time Under UB you can display and manage user bits GEN gt JamTC In the JamTC settings you can select from different jam behaviors Navigate toggling left right push to select AUTO the ACN TL will behave as used to from the former Lockit boxes It will jam once time code is detected but not re jam while time code is continuously present As long as time code is present the I mark disappears to indicate that the unit is not ready to re jam id If the time code is disconnected for 3 or more seconds the I reappears to indicate that the unit will jam again once time code is received OFF the ACN TL does not jam to external time ode This setting is useful if you set the unit manually and want to transmit an incoming time code value for instance from a device in record run mode at record start to the ACN Master unit manual once the ACN TL jams once to external time code but then will not jam again but close the jam port Once jammed the I indicator disappears signaling that the unit can not be jammed from outside This setting is useful if you want the unit to be jammed fr
20. nt time code is lost when power is removed The settings are stored the unit will power up with the last configuration used www ambient de 4 AMBIENT RECORDING experience GuaIITy 5 Description ser era n Eme oO Gm AMBIENT tiny LOCKIT ACN TL waw ambient de Battery compartment slider to be pushed left right for access to switch or batteries Configuration switch further config switch J for pushing in lt gt for toggle left right IR transceiver used to set and check the ACN TL from the ACC501 controller Display Signal LEDs External antenna connector Lemo 5 pin socket Lemo ACN time code in out RS232 serial port tx rx USB GPI O Switch function DC out O8 WPD Lemo 5 pin socket Lemo TC time code in out ascii tune signal PPF DC in www ambient de 5 RECORDING experience guality 6 Setup Menu Diagram When entering a menu the active parameter setting is highlighted MAIN DISPLAY showing time code frame rate sync rate jam mode network channel battery status J push select switch down to enter main menu and to select options toggle left right to navigate NY GEN 1 JamTC lt gt Edit lt gt Offset N JamTC AUTO lt gt OFF lt gt manual once N Edit HH MM SS FF N Offset 00 05 frames N UB JamUB lt gt Edit UB lt gt EXIT normal lt gt manual amp insert 00 00 00 FF back to main menu NY SYNC nF PPF lt gt O
21. om external time code but then not to be changed by incoming signal anymore to transmit an incoming time code value for instance from a device in record run mode at record start to the ACN Master unit Also can be used should a TinyLockit box be used to re jam cameras in intervals and using a bi directional time code cable which would with some cameras that put out time code permanently even in ext TC mode like the Alexa lead to resetting the www ambient de 9 AMBIENT RECORDING experience Quality ACN TL in AUTO mode To reactivate the jam port just push the config switch repeatedly me going gt GEN gt JamTC gt manual once gt and exit The I indicator appears again the unit is ready to be jammed once again CAUTION Resetting the generator will restart the sync signal doing this while recording will result in a corrupted file GEN gt EDIT In this screen you can edit a time code value manually Decrease or increase by toggling left right Holding left right is fast backward forward Push to select Pushing the config switch while on the frames position sets the time To avoid inadvertently changing the time code you will be asked Pushing the config switch while old is highlighted discards the changes and returns to the main menu Pushing the config switch while new is highlighted will set the generator to the selected value CAUTION Resetting the generator will restar
22. t the sync signal doing this while recording will result in a corrupted file GEN gt OFFSET An offset can be entered between the jammed time code and the time code on the output of the ACN TL Use this to compensate the processing delay that some file base cameras produce If offset is enabled it will be displayed in the main screen This shifts only the time code the sync signal stays locked to the frame start of the jammed time code running in background The offset has a range of 10 frames in 0 05 frames steps equals 2 ms at 25 fps www ambient de 10 AMBIENT RECORDING experience Quality GEN gt UB In the GEN gt user bit menu the user bits are being displayed The user bits can be edited manually and the jam behavior managed Under JamUB the jamming behavior is managed normal the user bits are being taken from external time code manual the user bits are not being overwritten by external time code This mode is to be used if you want a custom entry like date and camera Id for instance insert user bits can be inserted on the fly Note if the source time code was unplugged for more than 3 seconds and reconnected the ACN TL will re jam For just inserting changed user bits after interrupted time code you must also set the ACN TL to jam once or off in the jamTC menu In Edit UB the user bits can be edited manually Decrease or increase by toggling left right
Download Pdf Manuals
Related Search