Home

G2213E User`s Manual

image

Contents

1. 5 Click on Apply to save the settings of this page There can be more configured objects of event handling The Event List page may look like the figure below It is the summary of all configured event details Event Name Status Mon Tue Wed Thu Fri Sat Sun Trigger Action Remove Motion1 Enabled 00 00 24 00 MD SD Image Remove Motion2 Enabled 00 00 24 00 MD SD Image Remove Motion3 Enabled 00 00 24 00 MD SD Image Remove MD Event Enabled 25 5 2 002200 24002200 24002200 24002200 24002200 24002200 2400 D sb Veo Remove MTrigger Enabled 00 00 24 00 Manual oO s Remove Net Fail Enabled 00 00 24 00 NetworkFail SD Video Remove Note Maximum number of event list is 10 Ingrasys Techonology Inc System options Video amp Audio Network Recording Event gt System System Information The page gives details of the IP camera system In System Status the Model ID device firmware ActiveX version and MAC address are listed The Camera Name and Location fields are revisable to identify a unit among multiple cameras installed The IP address info of this IP camera is listed in Network Status The RTSP Status field shows the video stream s being requested by the listed client s b System Status Camera Name Location Model ID Firmware Version Activex Version ISP Firmware version MAC Address b Network Status IP Address Subnet Mask Gateway DMS Server PPPoE IP Address DONS Domain Na
2. Enable UPnP Service with UPnP enabled IP camera device can be easily discovered in Windows Network My Network Places See Discover devices in Windows Network in previous section Enable DDNS Service By registering this sort of service camera can be assigned and accessed over Internet with a hostname instead of IP address To enable the services visiting the website of the service provider and registering an account are required Dyndns org hitp Awww dyndns com DHS org http www dhs org Ingrasys Techonology Inc Quality Service Quality Service provides network traffic management to guarantee the quality of services in higher priority especially when network is insufficient DSCP Different Service Code Point is a 6 bit IP header which defines the service level of the packet According to the DSCP value routers with PHB Per Hop Behavior will define a specific class of traffic for the packet in terms of bandwidth latency or loss rate etc Enable QoS and set DSCP value for the service to ensure its quality to be maintained Network Type Network Connectivity Quality Service Access Port Access IP Filter Quality Service C Enable QoS DSCP RTSP 0 to 63 Event 0 to 63 HTTP 0 to 63 NOTE To make the QoS function work all the switches and routers in the network must support QoS The Web access port can be changed in this page Default HTTP and HT TPs port numbers are 80 and 443 respe
3. amp AxRTSP from Ingrasys Technology Inc gt Language gt Video Stream Actual Size Y 4 b E Tf FF FF tntemet protectedMode on d Rwos 7 Ingrasys Techonology Inc Continue the following instructions until the ActiveX is completely installed The IE browser can then display the live video of the IP camera as below figure f http 192 168 126 84 Windows Internet Explorer http 192 168 126 84 le Edit View Favorites Tools Help Ly Favorites pe http 192 168 126 84 gt Language 2010 09 28 16 83 25 13 dterz Video Stream Actual Size deidh s FERA Display Mode miii pape 4 M us i L F3 EJ C2 H8 LES E F3 ES lni x defe kkk x Q c E om Page Safety Toos amp o m 2 Megapixel IP Can Live Setup Logout A S Doe gt gt F OD ntenet ProtetedMode on Ma R004 7 NOTE If however there is not any prompted message or ActiveX can not be installed at all change the IE security level and settings In IE gt Internet Options gt Security gt Custom level make sure the Download signed ActiveX controls setting is Enable or Prompt selected Internet Options 4 Select a zone to view or change security settings Q0 amp y O Internet Local intranet Trusted sites Restricted sites Internet Sites This zone is for Internet
4. and Object Size of the rectangle covered area NOTE By name implying the Sensitivity setting means the sensitivity level to the motion detection the higher value given makes the motion window more sensitive to the moving object Object Size indicates the trigger threshold A lower Object Size value means it is easier to exceed the value and thus trigger the motion event Dum 5 The status chart shows the motion activities When the motion vector exceeds a threshold the Object Size the motion trigger is activated 6 Toenable other motion area repeat above steps 7 Click on Apply button to save the settings Event Server amp Media Motion Configuration DI DO Setting Event List gt Event Motion Motion Area 1 MI v Enable Motion Area 1 Window Name Areat Sensitivity 0 100 o 3 7 HN a Object Size 0 100 20 El 1 gt Motion Area 2 mE Mm Motion Area 3 Hi Ingrasys Techonology Inc DI DO Setting The DI DO setting provides the information of Digital I O s initial and current status The initial status can be configured while current status is detected by the IP camera system Digital input DI can be configured as one of the trigger conditions When its current status is different from the initial the trigger is activated Digital output DO on the other hand can be one of the responding actions When its current status is different from the initial status
5. Ingrasys Technology Ine Table of Contents Important NolceS Read Beror USE serrana ENEE 2 DE O E E E AE E E ter RETEK 2 Pakane B ON e E E E EE T 3 aO E E E EEA EEE E S 4 Hardware installa ON esnie en LOT EE etette sk l k E E 4 Assigning IP Address to the device ccccccccccssssssssssssssssseeeecccccceeeessaaeesssssseeeeeeeeeeeesesssaaaeessssssssseeeeeeecesesesaueaasssseeeeeeeeess 4 Discovering devices in Windows Network ccccssssssssseeeeececeeeeeeeeeaaseessesseeeeeeeeeeeeeeeeeaaaeaaeeeesseeseeeeeeeeeeeeeesuaasssseeeeeeeeeees 5 ActiveX add on INS CAN ATI OM ences meme ene a ea ae aE a a aeaa Eaa NKA Eaa Aera Eaa Ena 6 ACCO TD eo CE A a E moaeusssueasiag nee 8 IY SS YT EN IVR em EE 8 FOG ND Sy TS WV T E N EEE T A E AE EE I A m NE NE CE A MEUEDN M EDUUS 10 VC o E E E EEE AE T EE EA EAEE 14 New OMT UO pna Ea E E E A gere eUUE 21 EASE E A E E E E E EN E E EAE E E N E TA 25 E vent A eee nce E eerss DN Era dU aedcacencaeaaneseodeeceodsaseadecadsics 29 GContis ratlottot Event Handini LT 29 Examples or Even Hndi Pls oos ee ersertetcner dione endow Sets nd wate aypaasl ose paw ewan tee mean MU cum ESL kezen eM em SESS uensacuenmhineee 35 SAUCIUS OP ONS ETE EE E OO UT 39 EDI EINEN OUT 43 VOconneciors PTO Oe TION essersi ienee xo vincens educ uisa CA US ben EOS EE UUR IU Roda pa Ru USES UE UU CU NEE OERE
6. System Information Date and Time User Management Maintenance LOG service b System Log System Log b Event Log b System Log Parameter List Ingrasys Techonology Inc Connectors DC Power Black n Lime out Green Ground R5 485 Data RS 485 Data AC input AC input Reset Ground Digi out Ground Digi in Ingrasys Techonology Inc Schematic diagram of Digital I O Ingrasys Techonology Inc Troubleshooting Check firmware version Firmware version may imply the functionalities updates or availability in the camera system Therefore in the first step of troubleshooting and then reporting it helps to locate the found issues Newer version firmware may have these issues corrected The version code can be found in Setup gt System gt System Information see figure below System Information Date and Time User Management Maintenance Camera Name iMege Location ISP Firmware Version DEMO 00 MAC Address 00 80 CC 01 33 34 Upgrade device firmware Firmware upgrade process should be done via the web configuration Setup System gt Maintenance gt Firmware Upgrade Before the process read the instructions and release notes coming with each new released version For the steps Check and retrieve the latest firmware image file from iMege website Disconnect all clients requests from the camera that will be firmware upgrading otop the record
7. the output is triggered Event Server amp Media Motion Configuration b Digital Input Output Status Sensor sensor Marne Digital Input 1 di Digital Gutput do P Digital Input Output Configuration Sensor Sensor Marne Digital Inputd dil Ingrasys Techonology Inc DI DO Setting Event List Current Status Open Open Initial Status Event List List a summary of configured events That is the selection of trigger condition s and the corresponding actions as well as the scheduling Up to 10 event objects can be configured Event List DI DO Setting Motion Configuration Event Server amp Media gt Event List Sun Trigger Remove Event Name Status Mon Tue Add New Note Maximum number of event list is 10 Click on Add New button This extends the form for detailed configurations b Add Edit Event List C Enable This Event Event Schedule 2011 09 22 06 29 41 Thu 9 Select All Scheduled Pattern 012345 6 8 910111213141516171819 2021 2223 Triggered by Cl Motion Detection Motion Area 1 Motion Area 2 Motion Area 3 Digital Input Digital Input 1 Manual Trigger Network Fail Action Trigger digital output fr seconds Upload files to a server Event Server Media Type Ei Seis Event Sener TEJ Select Media Tree 9 Ei Select Event Sener FE Select Media Tee Ei See Event Sener Select Media Tyee Ei Select Event Sener FA S
8. 8 Video Orientation Mirror E Flip 0 16 0 16 0 16 0 16 Event System gt Day Night Day Night Mode Auto v gt Advanced Setting AC Frequency 60Hz v z White Balance Auto v IRIS Mode Auto v Environment Indoor Flickerless Mode On Exposure amp Gain Mode Max ShutterSpeed XX 1 60s 8130s Max Gain Value WX C 16x 3 BLC E of Sos Exposure Level 4 B i 0 16 Apply Reset Ingrasys Techonology Inc Camera Setting gt Preview Video b Image Setting Brightness 8 8 0 16 Contrast 8 0 16 Saturation 8 M 0 16 Sharpness 8 B 0 16 Video Orientation Mirror L Flip gt Day Night Day Night Mode Auto gt Advanced Setting AC Frequency GHz White Balance Auto v IRIS Mode Auto v Environment Indoor Flickerless Mode On v Exposure amp Gain Mode Auto Y Max Shutter Speed e 160s v 1 30 s v Max Gain Value Wax 0 9 1x BLC Ww orf Sor Exposure Level 4 ye 0 16 Image Setting Brightness the luminance of image view Default value is 8 adjustable from 0 to 16 Contrast the ratio of luminance of white to black Default value is 8 adjustable from O to 16 Saturation colorfulness of a color related to its own brightness Default value is 8 adjustable from 0 to 16 Sharpness refer to image acutance which presents in the
9. Configuration Sensor Sensor Marne Initial Status Digital inputi dil en Digital Output 4 Goto Event List page Click on Add New button Ingrasys Techonology Inc b Add Edit Event List Enable This Event Event Name MO Event Event Schedule 2011 08 22 07 15 24 Thu Event of Motion Detection a Checkthe box to enable this event Select All Give a name of this event setting e g MD Event Scheduled Pattern stands for Motion Detection This is an identity 910111213141516171819 20212 ofan object of event handling Select time frame in the schedule table for the requirement that is available from 22 00 to 08 00 everyday B m E Ed Ej E ES ud Select Motion Detection for this event s trigger source Suppose that all 3 motion areas are d Motion Detection enabled Triggered by Check the box to enable and select the SD card C Digital Input as the storage destination Choose Video for 7 the configured media Digital Input 1 Manual Trigger Check the box to enable the digital output as the L I Network Fail event action In the example the output will be changed to 12V for 10 seconds then goes back Action r to Open status Trigger digital output ford seconds Upload files ta a server Event Server Media Type Select Event Server v elet Media Type 7 Select Event Serer F Select Media Type Select Event Seer elet Media Type
10. Reset pin and Ground pin of the terminal block within 1 second the system will be restarted 2 Reset User Management Short Reset pin and Ground pin of the terminal block for 5 9 seconds User management settings will be reset to default and the system will be restarted 3 Reset to factory default settings Short Reset pin and Ground pin of the terminal block for over 10 seconds the system will be reset to factory default and the system will be restarted Ingrasys Techonology Inc LED Indicators The RJ45 LEDs on the LAN connector can help to recognize the current device status RJ45 LEDs for Network Status o ON ey l ON ON ON Flashing Ingrasys Techonology Inc Technical Specifications Model Name G2213E System Embedded Linux ARM based 32 Bit RISC Processor 32MB Flash ROM 128MB SDRAM Video Compression H 264 MPEG4 MJPEG Video Resolution 1920x1080 1280x720 800x450 640x360 480x270 320x180 Frame Rate Up to 25fps 1920x1080 Up to 30fps 1280x720 800x450 640x360 480x270 320x180 Image Sensor 1 2 7 progressive scan CMOS sensor Lens CS mount Fixed iris Focal Length 12 0mm F1 8 Minimum Illumination 0 5 Lux F1 8 ICR Removable IR cut filter for day amp night vision AEC AWB BLC Brightness Contrast Saturation Sharpness Image Settings Flip Mirror OSD Timestamp amp Text caption overlay Motion Detection Digital Input and Manual Trigger Ev
11. Talwan Right click on the device and select Properties the pop up window shows all the information related to the device including the web access info Use the web address to connect to the IP camera Or simply double click on the selected device which gets immediately access to the camera webpage M iMege 00 80 CC 01 33 34 Properties iMege 00 80 CC 01 33 34 Dy iMege 00 80 CC 01 33 34 o l iMege 00 90 DD 01 91 90 Device Details 123456789001 00 80 cc 01 33 34 uuid Upnp IPCam 1 0 1417586880 192 168 126 84 ActiveX add on Installation The access to the camera webpage for the first time will be prompted to install the ActiveX This installation is essential for viewing live video via IE browser To allow the installation click on the message bar and select Install This Add on for All Users on This Computer http 192 168 126 84 Windows Internet Explorer DI x DD gt http 192 168 126 84 M 69 x JD Br p He Edt View Favorites To Help Gly Favorites 535 http 192 168 126 84 ty E 7 P mm Pager Safety Toos 2 This website wants to install the following add on AxRTSP from Ingrasys Technology Inc If you trust the website and the add on and want to x install it dick here Install This Add on for All Users on This Computer What s the Risk ETIANI 10 Live Setup meme Logout BOCHOORO b Click here to install the following ActiveX control
12. Tool The web page with video will then be shown as below e http 192 168 126 84 Windows Internet Explorer Je http 192 168 Ir r x 192 168 126 84 j ils gt Language Video Stream Actual Size Display Mode O EH 00 j DATE 2011 06 15 LI Os 16 OOP If 2 RTSP Player The live video of the camera can be played with a RTSP player such as VLC or QuickTime A URL command like rtsp Camera IP stream1 will be required The example given below is that the live video is displayed with QuickTime player x Enter an Internet UAL to open sp 7 1 32 158 125 B4 stream1 Cancel Ingrasys Techonology Inc 3 NVR CMS Software Some software NVR CMS vendors may have announced the integration with this camera model In this case the software is able to retrieve the video from the camera for both live displaying and recording For detailed support information and operation please contact the software vendors for further instructions NOTE The camera supports three simultaneous video streaming see Video amp Audio gt Video Setting To gain access to the camera for each video stream the RTSP path will be required The default paths for the 3 streams are stream1 stream2 and stream3 The URL would be like below Stream1 rtsp Camera_IP stream1 otream2 rtsp Camera_IP stream2 Streams rtsp Camera_IP stream3 Ingrasys Tech
13. amplification factor for the incoming light Increasing the gain value provides a brighter image but the noises may also be increased BLC Enable this function for image objects under backlight circumstances Exposure Level Adjust Exposure level for a target exposure time that is the amount of light allowed for the image sensor NOTE The Shutter Speed Gain Value and BLC can be configured for daytime and nighttime The configurations will be applied according to the current status of Day Night Mode Ingrasys Techonology Inc Video Setting b Video Stream Enable Stream 1 wy Enable Stream 2 Enable Stream 3 wv b Video Overlay Enable OSD b Privacy Mask Enable Privacy Mask we b Join Video Join Camera List Index Camera Mame IP Address Video Stream This tab provides detailed stream configurations These settings can affect video size quality The maximum transmission performance can be expected under the condition of full network bandwidth The camera supports up to 3 video streams Each stream can be configured with following items b Video Stream Enable Stream 1 Videa Format Resolution Frame Rate Intra Frame Period 15 m Video Quality constant BitRate Target Bit Rate Variable BitRate Quality Level Enable Stream 2 Enable Stream 3 Video Format H 264 MPEG4 and MJPEG are available for the selection The demand of bandwidth and storage requirement diffe
14. edges contrast of an image Default value is 8 adjustable from O to 16 The 4 correlates are referring image appearance in terms of color vision that are adjustable according to user preferences Video Orientation change the image orientation Mirror rotate the image horizontally Flip rotate the image vertically These operations are usually applied when camera must be installed in an exceptional position e g ceiling so camera must be upside down installed Day Night Switch the video images for Day plenty of light or Night Low light scene In Auto mode camera will switch to Day or Night vision according to the light intensity The switching of Day Night modes includes 3 actions switching IR Filter In Off turn Off On IR lamp and switching image to Color Mono In day mode the IR filter is switched in to avoid the image sensor from receiving the infrared and the IR lamp is turned off thus the true color image is provided When camera enters night mode the 30M IR lamp is turned on and IR filter is switched off to allow IR illuminations going into the sensor thus increasing the images light level The image color is switched to B W Mono mode Ingrasys Techonology Inc Advanced Setting b Advanced Setting AC Frequency BUH White Balance Auto Y IRIS Mode Auto Environment Indoor i Flickerless Mode On Exposure amp Gain Mode Auto Max Shutter Speed XX 1 60s 8 130s Max Gain Va
15. information The SD card can be formatted in this page Recording Plan SD Storage SD File List b SD Card SD Card Status Recording Total Size 29 87 GBytes Free Size 5 53 GBytes Used Size 24 34 GBytes Used 55 Disk Format NOTE 1 Itis recommended to insert the SD card before powering up the system This is to ensure that the attached device is properly detected in the initial stage 2 When the SD storage is full the system will automatically launch overwrite process The earliest hour records will be deleted for more space Ingrasys Techonology Inc SD File List This page provides the search of records The SD storage may contain both triggered by schedule recordings and triggered by events snapshot video There are search conditions used to narrow down the search results The latest 10 Records The most recent 10 records are listed in this block Each record name is a link to view this video or image Following the Record Name each record is listed with its Trigger Type and Record Size details P Latest 10 Records Record Name 20101210111505125 E jpg 20101210111503349 Ej 20101210111502777 Ejpg 20101210111454709 E avi 20101210111452333 Ej 20101210111451260 Ejpq 20101210111439639 E avi 20101210111335085 Ej 20101210111335055 E avi 20101210111333918 Ej b Searching the Records Search Criteria Trigger Type Motion Detection Manual Recording E Digital Input Trigger
16. 51517 E jpg Network Fail 86 KB 7 20101207090441823 E avi Network Fail 1 MB 20101207090025323 Ejpg Network Fail 90 KB 7 20101207090024207_E jpg Network Fail 56 KB NOTE The search criteria can be multiple selected for each searching For instance the search result can be the combination of Network Fail and Digital Input Ingrasys Techonology Inc Event management Event management describes the handling of events with the corresponding actions A common case can be exampled is storing a captured image to a local storage Actions when there is a Motion Event Trigger Condition This chapter gives the configurations of Triggers what to detect and Actions what to send and where to send A time based schedule can also be applied Video amp Audio Network Recording gt Event System Configuration of Event Handling There are 4 subdirectories in the Event category The 4 configuration groups are correlated A completed event setting may need to configure each part in sequence Event Server amp Media Motion Configuration DI DO Setting Event List Event Server 8 Media The Event Server is the configuration of where to send e g FTP server while Media is the sending file type The combination of file type and the remote servers will then be applied as an event action Event Server List Click on Add New button to add the remote severs These are ema
17. AUREA 43 Schematic diagrami of Digital es T 44 duro o a T RUM 45 Check DEI OEC VCE SIO ss usse szenn Ene Enea EEE aenetenereta engen t CETE ETENE E E EEE EE E E aea 45 Hperade device BIG WAL C veanmetevscorntsonsvau steve eotsaasdecxecentyoawveusogevieslneta en rees ensanae veuticgs thane ESN Eer Ven aeiee Enosis krieke sueis 45 Sa E E a E E E N ex E E E E E entbedeteU dunes cus anePs 46 ET MGC AE OU Sooo E E S E E VETTE 47 Teen aT SDOCIHHCOU OBS e E ert E Meter trent nen rere UP AE tern 48 Ingrasys Techonology Inc Important Notices Read Before Use This instruction manual is intended for administrators and users of the iMege G2213E IP Camera including instructions for using and managing the camera on your network The use of video surveillance devices can be prohibited by laws that vary from country to country It is the user s responsibility to ensure that the operation of such devices is legal before installing this unit for surveillance purposes Heed all warnings Before installing the IP Camera please read and follow all the safety and operating instructions to avoid any damages caused by faulty assembly and installation The user must adhere to all the warnings on the product and in this manual Liability Every reasonable care has been taken in the preparation of this instruction manual Ingrasys can not be held responsible for any technical or typographical errors and reserves the right to make alterati
18. Time From Date To Date File Type AVI JPEG Ingrasys Techonology Inc Trigger Type Motion Detection Motion Detection Motion Detection Motion Detection Motion Detection Motion Detection Motion Detection Motion Detection Motion Detection Motion Detection schedule Recording Network Fail Time Time hh mm ss Record Size 94 KB 95 KB 94 KB 1 MB 96 1 MB 1 MB 95 KB Searching the Records The SD storage would keep massive records after the recording plan and or event handling see Event Management is launched for a certain time The search criteria are provided to look for particular records in the SD card There are 3 categories of search criteria 1 Trigger Type includes Motion Detection Digital Input Manual Trigger and Network Fail as the type of triggered by events and Schedule Recording as the type of triggered by schedule 2 Trigger Time select a time rage that records are created 3 File Type search files that are either video clips avi or pictures jpeg or both The example below is the search result of Network Fail b Searching the Records Search Criteria Trigger Type TI Motion Detection Schedule Recording Manual Recording Network Fail Digital Input Trigger Time From Date To Date hh mm ss File Type E AVI JPEG b Search Result Record Mame Trigger Type Record Size 20101207090452703 E jpg Network Fail 56 KB 201012070904
19. a dial up connection to the ISP and then get connected to Internet RTSP Streaming The 3 RTSP streaming protocols below are available for different network environments UDP This is unicast method in RTP over UDP UDP is a simple transmission mode and more likely for request of the most up to date information However video packets may be lost or dropped in the network traffic as UDP does not guarantee the endpoint transmission This method is usually applied in a smaller scale of LAN or intranet environment where packet lost may not be an issue TCP This is unicast method in RTP over RTSP TCP TCP is areliable for end to end data transmission when comparing to UDP mode Thus it is applied for quality of the data is concerned This method is used when data is sent through networks or Internet HTTP It is unicast method in RTP over RTSP over HTTP As firewalls normally allow HTTP protocol itis not necessary to enable the specific port for RTSP video traffic That is the IP camera s web page with live video stream can be retrieved through HTTP port Network Connectivity This page provides the connectivity configuration so that IP camera can be accessed without necessarily providing the numerical IP address Network Type Network Connectivity Quality Service Access Port Access IP Filter b Network Connectivity Enable LIPnP Service Enable DONS Service Service Provider dyndns org Hostname Account Password
20. ation Choose Video for the media type configured in Step 2 Check the box to enable the second action emailing with the captured pictures Select Email and image for the Event Server and Media Type respectively 5 Click on Apply to save the settings of this page Ingrasys Techonology Inc Scenario 2 A user is to define the motion detection area s in the camera view When someone goes across these areas camera is aware of the trigger activated and starts generating video clips to SD card Meanwhile an illuminator device attached to the camera will be lighted up This detection should be activated from 22 00 to 08 00 everyday The configurations are illustrated as below 1 Suppose that the required media type is previously configured That is the 20 seconds video clip configured in Scenario 1 2 Goto Motion Configuration page and define the MD areas 3 Goto DI DO Setting page and set up the Initial Status of the digital output NOTE The Initial Status is the normal state no event triggered of the DO pins In the case suppose that the connected illuminator can be driven by DC12V The initial status should then be set Open When a motion event is detected camera changes the output status to 12VDC The illuminator is then lighted up b Digital Input Output Status Sensor Sensor Mame Current Status Digital Input 1 di Open Digital Output do Open b Digital Input Output
21. ctively The configuration of these port numbers provides the simple security Network Type Network Connectivity Quality Service Access Port Access IP Filter b Access Port HTTP Setting HTTPS Setting HTTP Port HTTPS Part Ingrasys Techonology Inc Access IP Filter This setting also provides a basic security by filtering the accesses from other hosts Enable this function and choose Allow Deny of the listed IP addresses Up to 15 IP address can be added in the list Network Type Network Connectivity Quality Service Access Port Access IP Filter b Access IP Filter Enable IP Filter Filter Type Allow Deny IP Address Enable F9 Se ee ee Fe a oe 9 98 Ingrasys Techonology Inc Recording This section provides the recording configuration on the camera Unlike the recording function on the live view page video is recorded to the storage attached to the camera that is the SD card according to a time based schedule Video amp Audio Network gt Recording Event System There are 3 subdirectories in the Recording category for detailed settings of each function Recording Plan SD Storage SD File List Recording Plan Recording Plan SD Storage SD File List gt Recording Plan List Plan Name Status Mon i f Source Destination Remove b Add Edit Recording Plan Enable This Recording Plan Plan Name plan1 Video Source Stream 1 v Ma
22. ded as the examples of Event Handling Scenario 1 While viewing live video user can manually trigger an event anytime simply by pressing a button cy on the web page It will then start generating a video clip to SD card and sending email with the captured pictures The configurations are illustrated as below 1 2 In Event gt Event Server amp Media gt Event Server List click on Add New Choose Email and fill in the email server and recipients information gt Add Event Server Server Name Email Server Type 9 Email Mail Server Address mis mail ingrasys com User Name emailuser Password 0 0 000000 Server Port Number 25 I Senders E mail Address IPcamera1 gingrasys com Mail Subject Prefix Alarm Notification Receiver Table Email Address Description user1 i mege com User1 mail account user2 i mege com User2 mail account In the same web page configure the Media Type That is the video will be stored to SD and the pictures will be attached In the below example the system is configured to capture 1 picture before pre alarm the event and 2 pictures for the event and after post aram For video clip both pre and post alarm are configured for 10 seconds video record gt Media Type Snapshot Video Source Stream 1 v Send 1 pre alarm image s 0 7 Send 2 post alarm image s 1 7 Video Clip Video Source Stream 1 v Pre alarm record 10 seconds 0 10 P
23. e This section describes these configurations Fundamentally for instance the IP assignment of the device can be done via DHCP server static IP option or PPPoE to obtain IP from the service provider Video amp Audio gt Network Recording Event System There are 4 subdirectories in Network Configuration for detailed settings of each network related function Network Type Network Connectivity Quality Service Access Port Access IP Filter Network Type Network Type Network Connectivity Quality Service Access Port Access IP Filter b Network Type Enable DHCP Service Use Static IP IP Address 192 168 1 1 Subnet Mask 255 2 Gateway 192 168 1 254 Primary DNS Server Secondary DNS Server Enable PPPoE Service Account Password b RTSP Streaming Ingrasys Techonology Inc Network Type There are 3 ways to configure IP address for the IP camera device including DHCP Static IP and PPPoE Enable DHCP Service The default setting is DHCP which camera will be automatically given an IP address in a network with DHCP server Use Static IP Camera may also be manually assigned with a static IP address Subnet mask Gateway and DNS server s will also need to be specified for certain network function properly executed Enable PPPoE Service This service is usually provided by an ISP Internet Service Provider IP Camera can establish
24. elect Media Tyee Event Name enter a name e g Motion Detection to identify this configured event Event Schedule choose Select All for 24 7 or drag and draw to select the hours of a day in a week that this configuration will be taken effect Ingrasys Techonology Inc Triggered by this describes the selection of trigger conditions which include 1 2 Motion Detection select the motion detection area s used for trigger condition To enable and configure the motion detection areas go to Motion Configuration Digital Input enable system to detect the DI Digital Input status as a trigger condition For detail DI setting go to DI DO Setting Manual Trigger enable system to detect the user input action press the alarm button on the live view page Network Fail enable system to detect the network connection status Action selection of responding actions 1 2 Digital output check the box to enable the digital output as a responding action For detail configuration go to DI DO Setting Upload files to a server this sort of action contains 2 parts selection of the destination and selection of file type The destination includes the local SD storage the FTP server and the email recipients The file type includes snapshot image and video clip For detail configuration go to Event Server amp Media Ingrasys Techonology Inc Examples of Event Handling The following cases are provi
25. ent Management Digital Output Action oe l Notification via Email FTP or SD with attached video clip or snapshot On Board Storage SD SDHC Card Slot 10 100 Base T Ethernet Network IPv4 TCP IP HTTP HTTPs UPnP RTSP RTP RTCP IGMP FTP DHCP DNS DDNS PPPoE NTP SMTP Audio 1X External Mic In 1 X Line out DC 12V 2A Power Supply AC24V Built in PoE IEEE 802 3af compliant Operation Temperature 10 C 55 C 14 F 131 F Operation Humidity 20 90 RHG Dimension L x W x H 265mm x 100mm x 110mm Net Weight 1200 grams 1 x RJ45 Ethernet LAN Connector 2 x Phone jacks External Mic In x1 Line out x 1 Connectors amp Indicators 1 x 12VDC Jack 1 x BNC Connector Terminal block for RS 485 Digital Input Digital Output GND Reset AC 24V input Client System Requirement OS Microsoft Windows 7 Vista XP 2K Browser IE 6 x or above Approval CE FCC Design and specifications are subject to change without notice Ingrasys Techonology Inc
26. eo Overlay b Video Overlay Enable OSD Include Timestamp Date amp Time Position Up Left Include Text Position Uplet Color White Background Black Transparent 0 The camera supports stamping text information on the video images The date time string or and a line of text message e g Camera Name or View location are available to be selected for displaying or hiding on the images The strings are placed on the video image as header footer in left middle or right position The text color background color and transparent level to the image can also be configured Privacy Mask b Privacy Mask Enable Privacy Mask I i n F Privacy Mask List Index Privacy Mask Marne Modify 1 Mask Edit Remove Privacy Mask Mame Privacy Mask can block out areas from view Blocked areas will not be seen in both live view and recorded video clips Input Privacy Mask Name and click Add New button to add a new mask Up to 8 masks can be set in the view Ingrasys Techonology Inc Join Video This function allows user to add other video sources All added videos can be displayed concurrently on the live view page gt Join Video Join Camera List Index Camera Name IP Address Add Edit Join Camera Camera Name Video Stream Test Camera Connection Press Add New button to extend the panel for connection info Input the camera name and choose the video stream fr
27. for playing other video sources see Video Setting gt Join Video M D 4 Biulzielelelb 8 amerc bad Setup NOTE The sub video streams can also be joined in 4 channle mode so that live page can display simultaneously all the 3 video streams from the same IP camera ePTZ only supports Stream2 and Stream3 ari A gt Language English v is ad gt video Stream dite we a Stream 2 v Select Stream 2 or Stream 3 Actual Size gt Display Mode DATE 2011 04 19 TIME 05 01 19PM Ingrasys Techonology Inc ePTZ Control Pannel ePTZ Panel Pan Tilt control buttons Zoom In Out control buttons Area of view Ingrasys Techonology Inc Video amp Audio This section describes how to configure the video streaming of the device and the related camera image configurations Users with Administrator or Operator authority see System gt User Management would intend doing these configurations Setup Orpi Click on Setup to enter the configuration pages gt Video amp Audio Network Recording Event System There are 3 subdirectories in Video amp Audio for detailed settings of each function Camera Setting Video Setting Audio Setting 2 Megapixel IP Camera Live Setup Logout gt Video amp Audio gt Preview Video gt Image Setting EUM Brightness 8 Contrast 8 Recording A Saturation 8 Sharpness
28. il recipients and FTP server gt Add Event Server Server Name Server Type Email Mail Server Address User Name Password Server Port Number 25 Senders E mail Address Mail Subject Prefix Receiver Table Index Email Address Description FTP FTP Server Address User Name Password Server Port Number 21 Upload Path 7 Passive Mode Ingrasys Techonology Inc Email Send the media file via email when an event is triggered Mail Server Address enter a host name or IP address of the email server User Name enter the user name of the email account Password enter the password of the email account Server Port Number the server port of the mail server Default is 25 Sender s E mail Address enter the email address of the sender Mail Subject Prefix enter the subject description for the mail Receiver Table enter the recipients email address The mail can be sent to up to 5 recipients FTP Send the media file to a FTP server when an event is triggered FTP Server address enter the FTP server s address User Name enter the user name of the FTP login account Password enter the user name of the FTP login password Server Port Number the server port of the FTP server Default is 21 Upload Path enter the file path that files will be sent to Passive Mode check the box for passive mode transmission This option is usually applied when the FTP server in behind a firewal
29. ime windows com which is usually the ability of Internet access The IP camera system can therefore get updated with the time server NOTE To apply synchronize with NTP Server a Time Zone must be selected for referencing to the local time Synchronize with PC The PC connected to the IP camera can also be a date time synchronizer However if the PC is connecting from a time zone different from where camera is installed the system will pop up a warning message for time zone differential Set manually manually adjust the date time for the system Date Display Format The system date can be displayed in the format of DD MM YYYY MM DD YYYY or YYYY MM DD Time Zone Select an appropriate time zone for local where IP camera is installed The automatic adjustments will be applied based on the selected time zone Check the Daylight Saving Time checkbox for areas that are observing DST Ingrasys Techonology Inc User Management By default the access to the camera is not user authenticated For security the IP camera should be restricted to account only accesses It is able to enable user accounts as well as to manage the added users in this page System Information Date and Time User Management Maintenance LOG service Enable Authenticati b User List Index User Name Password User Group Modify 1 Admin MSS Administrator Edit Add New Initially there is a default account Admin in the User Lis
30. ing local remote if it was enabled Go to the Firmware Upgrade page browse and locate the downloaded firmware image file then click on Upgrade button el ea b Firmware Upgrade Current Firmware Version Y0 01 05 Select Firmware File I Upgrade 5 The upgrade should start immediately depending on file transferring status The web will then show the upgrading progress Overall upgrading process takes about 2 minutes In this period DO NOT DISCONECT the power Otherwise the system of this unit can be damaged Ingrasys Techonology Inc System Information Date and Time User Management Maintenance Upgrade Process 34 User Management Maintenance System Im rmation Date and Time Upgrade Success Restart system please watt 2 sec 6 The front LED indicator will be slow flashing in red color during the upgrading process When it becomes steady on in green color camera is ready to be accessed Check the firmware version to confirm that the system is successfully upgraded Recover device settings In some cases camera system does not respond to any operation A certain recovering processes would help to get the unit back to initial status so that it can resume operable configurable This will be the operations on the Reset Function Fa r E i e iin BNC Output im OC Power Black b Line out Green A Sa bt Mic tn Purple HE Emm 1 Restart Reboot the device Short
31. l Media Type There are 2 types of media file available snapshot jpg image and video clip avi Event Server amp Media Motion Configuration DI DO Setting Event List gt Event Server List Server Name Server Type Address Note Maximum number of event server listis 2 gt Media Type Snapshot Video Source Stream 1 v Send 1 pre alarm image s 0 7 Send 2 post alarm image s 1 7 Video Clip Video Source Stream 1 Pre alarm record 10 seconds 0 10 Post alarm record 10 seconds 1 10 Maximum file size 5000 Kbytes 500 5000 Apply Video Source the video source from either streaming that will be captured Pre alarm Post alarm image s enter the numbers of images that will be captured before and after trigger is activated Pre alarm Post alarm video enter the numbers of seconds that video will be recorded before and after trigger is activated Maximum file size define the maximum file size that a video clip is generated Ingrasys Techonology Inc Motion Configuration There are 3 MD Motion Detection areas can be enabled Each MD can be individually enable disable set its covering range and the trigger sensitivity To enable and verified the MD follow the steps below Check the box to enable the motion area Drag and drop to move the motion window Hold and drag any corner of the rectangle to resize the window By dragging the pin of the slider bars adjust the detection Sensitivity
32. le can be applied to upload the previous user settings to the camera or other cameras NOTE The backup file can be applied to other IP cameras so user won t needv to configure each device It is recommended to switch the IP setting to DHCP mode before exporting the backup file Otherwise all IP cameras will have the same IP address e Firmware Upgrade there may be new released firmware for updated features or issues fixed To upgrade the firmware for the system retrieve the firmware image file import to the system and then do the upgrade process System Information Date and Time User Management Maintenance LOG service P Reboot Reboot Note Restart system Please wait 25 seconds for reboot b Restore to Factory Default E Except Network Type b Backup Configurations b Upload Configurations Note Return system configuraiton Use a backup file to return the camera to a previous configuration Select File gt Firmware Upgrade Current Firmware Version v1 07 Select Firmware File The system operations and or process will be recorded in the log system The link provides the review of these records System Log contains records of system changes e g login failed link on off video settings updated and etc Event Log records the log message of triggered event for instance motion detection is asserted Parameter List list all the system parameters with the current value e g network lan static_ip 192 168 126 84
33. lled in a network with DHCP and UPnP services after obtaining an IP address from DHCP server it can then be discovered in Windows Network of a client PC see figure below The reason for being automatically discovered is that the IP camera s UPnP is default enabled see Network gt Network Connectivity T Network O x e fi Network Search Network Fa Organize v Network and Sharing Center Add a printer Add a wireless device v l E FY Favorites Other Devices 6 eg Libraries j iMege 00 80 CC 01 30 32 4 b iMege 00 80 CC 01 30 38 EH ed Homegroup u iMege 00 80 CC 01 30 3E bh iMege 00 80 CC 01 33 34 m jM Computer i il iMege 00 80 CC 12 91 99 iMege 00 90 DD 01 91 90 El NOTE The term Windows Network in given figure above is used in Windows Vista 7 It can be referred to Windows XP s My Network Places which possesses the same capability of discovering UPnP devices Ingrasys Techonology Inc To identify the camera from the listed devices in Network utilize the UPnP name e g iMege and the device s MAC address This MAC address can be found on the label see figure below Model G2213E Power Rating DC 12V 12W AC E DIM Serial Mo iI ll HU LE Cpsesion ia wuidec lo the loue ime cordon is 1982 ee C nm i j Ee aa Ete y Ww Waheed Deos MAC LI EE LEE M talaiina ite eines Ful cui aiut undesired operation Meade in
34. lue Xe axo QR x 7 BLC OS of or Exposure Level 4 n 0 16 AC Frequency Anti flicker setting for environment with fluorescent light sources image sensor needs to fit the frequency of light power source For instance the power frequency is 50Hz for most European countries while 60Hz is typically for US This setting is therefore regionally different White Balance the selections for different lightening condition which is refereeing to color temperature IRIS Mode Enable auto IRIS mode when DC Iris lens is installed System will enable auto exposure and gain control Environment Select an environmental lightening This gives an overall exposure condition Flicker less Mode flickering can also present in various exposure level Set Flickerless Mode On to fix the maximum shutter speed auto exposure control Thus the flickers can be eliminated Exposure amp Gain Mode Select auto manual Exposure amp Gain control mode The selection defines the controlling in a range of or fixed value according to the following two items Shutter Speed and Gain Value The configurations will be limited at selected maximum rates when AUTO mode is on Max Shutter Speed referring to exposure time Higher shutter speed is normally applied under strong light circumstance so the image won t be overexposure Lower shutter speed on the other hand keeps image luminance in low light environment Max Gain Value the
35. me RTSP Status Ingrasys Techonology Inc System Information Date and Time User Management Maintenance LOG Service G2213E VD 04 1 0 0 161 v5 ODEEDEDIS FF AE 2Z 10 1 4 81 255 255 0 0 10 1 1 254 Ho RTSP connection Date and Time This section describes the date time adjustment for the IP camera system The ways to adjust the IP camera s date time can be automatic Synchronize with NTP Server PC or manual settings System Information Date and Time User Management Maintenance LOG service b Current Date amp Time Date vvyy mm dd 2010112 Time hh mm ss 14 34 24 b Configure Date amp Time O Keep Current Date amp Time o Synchronize with NTP Server NTP Server Address time windows com Update Interval Daily Synchronize with PC Computer Date 2010H 1H2 Computer Time 14 33 49 o Set Manually Date 2010 11 12 Time 44 34 15 Date Display Format YYYY MM DD GMT 06 Taipei Beijing Hong Kong El Daylight Saving Time Enable Automatically Time zone Current Date amp Time Display current system date time of the IP camera The date format can be changed from the drop down list in Configure Date amp Time Configure Date amp Time Keep Current Date amp Time the option of keeping current date and time not to be adjusted Synchronize with NTP Server automatic method for date time adjustment The IP Camera must be able to gain access to the given NTP server e g t
36. om current camera Press Test Camera Connection button to check this stream s availability gt Join Video Join Camera List Index Camera Name IP Address Modify 1 Camerat 192 168 1 2 Edit Remove Add New Add Edit Join Camera Camera Name Camera IP Address RTSP User Name RTSP Password RTSP Path RTSP Port Test Camera Connection Press Advanced button to join video streams from current or other cameras Input the IP address of the camera the user name password if it is authenticated the RTSP path for different streams and RTSP port number default is 554 Press Test Camera Connection button to check this link s availability NOTE If the joined camera is an iMege 1 3 Megapixel IP camera B1100 D1100 G1 102 the RTSP path should be blank and the RTSP port for stream 1 stream 2 and stream 3 are 554 1554 and 2554 Ingrasys Techonology Inc Audio Setting Check the Enable Audio checkbox to enable the video streaming with audio The audio encoding supports G 711 ulaw External Microphone is required for audio input source Camera Setting Video Setting Audio Setting b Audio Setting Audio Encoding Encoding ulaw Audio Input Seting SOUrCE External Microphone Ingrasys Techonology Inc Network Configuration The IP Camera acts as one of the network devices It allows IP address to be assigned so certain network functionalities can be implementable within this devic
37. onology Inc The live view page The first view of access to the camera is the web with live video images This page allows some basic operations of playing live video audio Language F Video Stream Actual Size a Display Mode ences Live Video Window Live Video Window Ingrasys Techonology Inc Snapshot Press the button to capture an image photo Record Press the button to start recording Press again to stop it Ei Record Path set up a file path that video clips and snapshots can be stored m 2E Full screen Press the button to enter the full screen mode Press ESC key to quit this mode ey Manual trigger Press the button as triggering an event See Event Management for detail Listen Enable Disable to receive video from camera Talk Enable Disable to send audio to camera Digital Zoom toggle the digital zoom function Video Streams Operations Language Language selection for the WEB UI Video Stream Stream 2 Select video stream for displavine on live video window Displav the video in actual configured size or digital scaled size Ca Actual Size Display Mode Live displav in single channel 4 channel mode ePTZ Panel ePTZ control panel Only shows on stream 2 and stream 3 Ingrasys Techonology Inc Magic in Vistan A Actual size DL Actual Size Display Mode Lj 4 channel a display mode
38. ons to the product and manuals without prior notice Ingrasys makes no warranty of any kind with regard to the material contained within this manual including but not limited to the implied warranties of merchantability and fitness for a particular purpose The user should verify the relevant information is current and complete before placing orders All products are sold subject to Ingrasys terms and conditions of sale at the time of order acknowledgement Ingrasys shall not be liable nor responsible for the applications and resale of its products or bundled software with statements different from or beyond the specification parameters stated by Ingrasys Ingrasys is under no obligation to provide any further technical support service or product software alteration beyond Ingrasys representation Trademarks All names used in this manual and products are probably registered trademarks of respective companies iMege is a registered trademark of Ingrasys Technology Inc All rights reserved CE FCC Statement EMC This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environment If the equipment is not installed and used in accordance with the instruction it generates uses and can radiate radio frequency energy which may cause harmful interfe
39. ost alarm record 10 seconds 1 10 Maximum file size 5000 Kbytes 500 5000 Click on Apply to save the email server and media settings In Event List page click on Add New and choose from the listed items according to the requirement It may be done as the figure below Ingrasys Techonology Inc b Add Edit Event List w Enable This Event Event Mame 7 b MTrigger Event Schedule 2011 08 22 06 79 41 Thu Select All Scheduled Pattern 012345 6 7 8 9101112131415161718192021 Triggered by C Motion Detection Motion Area 1 Motion Area 2 Motion Area 3 Digital Input Digital Input 1 d Manual Trigger Network Fail Action Trigger digital output fr seconds Wpload files ta a server Event Server Media Tvpe Ei Sect Event Sener M Select Meda Type B Eie Event Sener Select Medi Tyee M Event of manual triggering a Check the box to enable this event It can be deselected later without erasing all the following settings Give a name of this event setting e g MTrigger stands for Manual Trigger This is an identity of an object of event handling Choose Select All for 24 7 as this event is required for that it can be triggered anytime Select Manual Trigger for this event s trigger source This will activate the manual trigger button in the live view that user can manually trigger an alarm anytime Check the box to enable and select the SD card as the storage destin
40. rence to radio communications Operation of this equipment in a residential area is likely to cause interference in which case the user at his her own expense will be required to take whatever measures may be required to correct the interference Overview iMege G2213E is an outdoor IR30M bullet type IP camera designed with ICR and other rich features This camera provides forensic detail image to enhance the surveillance protection in both day and night conditions Integrating robust weather proof housing and selectable triple compression formats jV H 264 MPEG 4 amp MJPEG iMege G2213E camera provides incredible streaming efficiency and high quality video that is perfect for discreet outdoor installations such as subways schools building entrances and parking lots Ingrasys Techonology Inc Package Contents G2213E Quick Installation Guide Power Adapter Optional Hardware Pack im dy Sfp Screw pack of Screw pack of sheild cover bracket Ingrasys Techonology Inc Installation Hardware Installation Connect the camera to a network switch hub with an Ethernet cable 2 Connect the power jack to the camera and connect the adapter to a power outlet 3 For PoE camera model connect the camera to a PoE switch with an Ethernet cable no need to connect the power adapter to the camera DC Power Assigning IP Address to the device The iMege device discovery tool is a utility p
41. rovided for searching iMege network video devices in a network It can also manage the IP assignment for multiple devices This is useful when bulk network setting of the network devices is required When IP camera is correctly installed in a network it can be searched by the tool The steps of applying this search tool are as below 1 Launch iMege Discovery Tool iMegeDiscover exe The tool will start searching and then displaying the cameras on the Device List after they are found r Device List 3 Units IP MAC Model Version Account Password IP i Status MA 192 168 1 1 00 80 CC 01 87 39 G2213E 1 07 DHCP CIIM 192 168 126 85 00 80 CC 03 03 06 G2212E 1 07 Static OE 192 168 126 84 00 80 CC 01 33 34 6221 4H 1 07 Static Select All Set iP Auto Set IP Input AccountiPaseword Browse Refresh 2 Check the box to select a camera device from the list The following operations will be applied on it Ingrasys Techonology Inc 3 The selected camera may have been assigned a valid IP address via DHCP server It can also be manually given an IP address To do so click on Set IP button In the pop up Set IP window input the IP Subnet Mask and Gateway Input account info if camera is password protected 4 Click on the Browse button This will launch an IE browser and link to the camera web page immediately Discovering devices in Windows Network If the IP camera is insta
42. rs from the selection of video format In the request of same video quality H 264 contributes to less bandwidth and storage requirement which can be more efficient than MPEG4 or MJPEG Resolution The resolution here describes an image size counted in width by height e g 1280x720 referring to pixel resolution The maximum resolution available for Stream1 is 1920x1080 and other resolutions down to 320x180 Stream2 and Stream3 is available from 800x450 to 320x180 Frame Rate configure the maximum frame rate in video streaming Higher frame rate gives a better video in terms of smoothly moving objects scenes However this would result in higher bandwidth and storage requirement Ingrasys Techonology Inc Intra Frame Period is applied only in MPEG4 H 264 which the video stream is composed of I frames full image information and P frames motion compensated difference information This setting configures the Intra Frame Period which is the time period between 2 frames The shorter period means the higher frequency of I frame Video can then be well handled while bit rate may increase Video Quality select the way of bit rate control to adjust the video quality the Constant Bit Rate CBR or Variable Bit Rate VBR The selection of CBR mode concerns about the circumstances of fixed data rate transferring VBR on the other hand is utilized when network bandwidth is less concerned CBR is not applicable in MJPEG video mode Vid
43. t To enable this account click on Edit The Add Edit User Account table appears Fill the password in both Password and Confirm Password fields for the Admin account System Information Date and Time User Management Maintenance LOG service Enable Authentication b User List Index User Name Password User Group 1 Admin ue Administrator b Add Edit User Account UserName Password Confirm Password User Group Viewer Add New To create a new account press Add New button Create a User name Password for this account and select the user type Administrator Operator or Viewer Check the Enable Authentication box to enable the account authentication Click on Apply to save all the settings The user account with Administrator authentication can do all the configurations Operator has the same rights as Administrator except for User Management Viewer is allowed only the access to live view page Up to 8 user accounts can be added in the User List Ingrasys Techonology Inc Maintenance This page provides tools for camera system maintenances e Reboot restart the camera system e Restore to Factory Default restore camera factory default settings The network setting can be kept by checking the Except Network Type checkbox e Configurations User settings backup restore the system settings can be backed up and exported to a file The fi
44. websites except those listed in trusted and restricted zones Security level for this zone Allowed levels for this zone Medium to High Hedium high Appropriate for most websites Prompts before downloading potentially unsafe content Unsigned ActiveX controls will not be downloaded Enable Protected Mode requires restarting Internet Explorer Custom level Default level Reset all zones to default level x cancel Ingrasys Techonology Inc zx General Security Privacy Content Connections Programs Advanced ETT REST ar ee ee eee 12 4 Binary and script behaviors Administrator approved Disable fs Enable rj Disable 4 Download signed ActiveX controls Disable Enable nat secure Prompt recommended THT Se Disable recommended Enable not secure iii mb Tnitializa and errint ActiveX controle nnt marked ac cafe i k Takes effect after you restart Internet Explorer Reset custom settings Reset to Medium high default Reset ox om Magic in iMege Accessing the camera Viewing the live video With correct installations and IP settings the camera device can be approached via network There are three ways to view the live video from the camera 1 IE Browser Launch IE browser and input the IP address of the camera or click on Browse button on iMege Discovery
45. ximum File Size 200MB Destination SD v Schedule Recording 2010 12 10 12 23 09 Fri SelectAll Scheduled Pattern Al 0123 45 6 7 8 9 10111213141516 17 18 1920212223 Remove all schedule Recording Plan List It lists the created scheduled recording plan s The details of a recoding plan include Plan Name identifier of the recording plan Status enable or temporary disable the recording Mon Sun displays the hours in days of a week that recording is effective Source choose the video source from either streaming that will be recorded Destination set the path for the recorded file to be stored Remove delete this recording plan On a b Recording Plan List Plan Name Status Mon Tue Wed Thu Fri Sat Sun Source Destination Remove plan1 Enabled 8 17 8 17 8 17 8 17 8 17 X X Stream1 50 Remove Ingrasys Techonology Inc Add Edit Recording Plan Maximum File Size While recording continues and thus increases the file size a period of video record can be sectioned Each video clip can be limited its maximum file size Scheduling A recording plan can be 24 7 by choosing Select All It can be configured in hours pattern in each day of a week by drag and draw selecting on the schedule table see the figure below Al 012345 6 7 8 9 10111213141516 17 18 192021 22 23 SD Storage This page shows the SD card information when it is attached to the IP camera Click on Refresh button to update the SD space

Download Pdf Manuals

image

Related Search

Related Contents

Sitecom Wireless Media Adapter 300N  "取扱説明書"  Sony DSC-P200 Marketing Specifications  Scarica il manuale  Manual de instrucciones  Mode d`emploi des airbags Snowpulse 2009-10  Sony DSC-W1 Operating Instructions  Direct Ignition Operation And Diagnosis  STARION 9xx & 20xx PC Family Service Maintenance Manual  エバーフィットマットレス取扱説明書PDF(272KB)  

Copyright © All rights reserved.
Failed to retrieve file