FUSION SPOT
Contents
1. show 2 show 3 or show 4 from the Show Mode The other unigts must be set to either Slave 1 normal or Slave 2 2 light show mode A DMX cable between the units for daisy chaining is needed 2 light show In slave mode Slave 1 means the unit works normally and Slave 2 means 2 light show In order to create a great light show you can set Slave 2 on the second unit to get contrast movement to each other even if you have two units only 4 2 DMX Controller By using a universal DMX controller to control the units you will need to set a DMX address from 1 to 512 so that the units can receive a DMX signal Press the MENU button until Addr is showing on the display Press the ENTER button and the display will blink Use the DOWN and UP buttons to change the DMX 512 address Once the address has been selected press the ENTER button to confirm To go back to the functions without any changes press the MENU button again Press and hold the MENU button one second or wait for one minute to go back to the main menu Please refer to the below diagram to address your first 4 units Channel Unit 1 Unit 2 Unit 3 Unit 4 mode Address Address Address Address 10 channel 4 3 DMX 512 Configuration s v os 1 CHANNEL MODE Chamet Function value 068 127 008 067 Blackout 000 007 8 CHANNEL MODE 000 007 White 008 014 Light Blue 015 021 Pink 022 028 Orange 029 035 Green sions 036 042 Blue 3 043 049 Yellow 050 056 Red2. 057 127 Split colors 128 189 Color Scroll Fast to Slow 190 193 Stop 194 255 Color Scroll Slow to Fast 000 007 Gobo 1 Open 008 015 Gobo 2 016 023 Gobo 3 024 031 Gobo 4 032 039 Gobo 5 040 047 Gobo 6 048 055 Gobo 7 056 063 Gobo 8 064 071 Gobo 1 Shake 072 079 Gobo 2 Shake 080 087 Gobo 3 Shake 4 Gobo 088 095 Gobo 4 Shake 096 103 Gobo 5 Shake 104 111 Gobo 6 Shake 112 119 Gobo 7 Shake 120 127 Gobo 8 Shake 128 189 Gobo Scroll Fast to Slow 190 193 Stop 194 255 Gobo Scroll Slow to Fast 120 127 Gobo 8 Shake 128 189 Gobo Scroll Fast to Slow 190 193 Stop 194 255 Gobo Scroll Slow to Fast E 000 007 008 015 016 131 132 139 140 181 182 189 190 231 232 239 240 247 me 255 Close Open Strobe Slow gt Fast Open Fast Close Slow Open Open Fast Open Slow Close Open Random Strobe Open 6 Pan Tilt Speed 000 255 255 Fast gt Slow ae 000 069 070 079 080 089 090 099 100 109 110 119 120 199 200 209 210 249 meg 255 Null Blackout while Pan Tilt Move Null Blackout when Color changes Null Blackout when Gobo changes Null Reset All Null Sound Active 10 CHANNEL MODE Fast Close Slow Open 000 069 000 007 White 070 079 Blackout while Pan Tilt Move 008 014 Light Blue 080 089 Null 015 021 Pink 090 099 Blackout when Color changes 022 028 Orange 100 109 Null 029 035 ele Function 110 119 Blackout when Gobo changes 5 Col 036 042 Blue 120 199 Null AE 043 049 Yellow 200 209 Reset
3. All 050 056 Red 210 249 Null 057 127 Split colors 250 255 Sound Active 128 189 Color Scroll Fast to Slow 190 193 Stop Dimmer 000 255 0 100 194 255 Color Scroll Slow to Fast 000 007 Gobo 1 Open 008 015 Gobo 2 016 023 Gobo 3 024 031 Gobo 4 032 039 Gobo 5 040 047 Gobo 6 4 Troubleshooting 048 055 Gobo 7 056 063 Gobo 8 064 071 Gobo 1 Shake Following are a few common problems that may occur during Gobo 072 079 Gobo 2 Shake operation and some suggestions for easy troubleshooting 080 087 Gobo 3 Shake 088 095 Gobo 4 Shake 096 103 Gobo 5 Shake A The unit does not work no light and the fan does not work 104 111 Gobo 6 Shake 112 119 Gobo 7 Shake 1 Check the connection of the power and the main fuse 120 127 Gobo 8 Shake B Not responding to DMX controller ae a scroll Fast to Slow 1 DMX LED should be on If not check DMX cables to see if linked 194 255 Gobo Scroll Slow to Fast correctly st ha o 2 If the DMX address is showing but no response to the controller 015 pen 7 Shutter 016 131 Strobe Slow gt Fast check the address settings and DMX polarity 132 139 Open 3 Try another DMX controller Bo Pan Tilt Speed 000 255 255 Fast gt Slow C No response to the sound 1 Make sure the unit is not receiving a DMX signal 2 Check the microphone to see if it is good by tapping it The microphone is located on the bottom plate of the unit The cleaning of external optical lenses must
4. In the event of a serious operating problem stop using the unit immediately Never try to repair the unit by yourself Repairs carried out by unskilled people can lead to damage or malfunction Please contact the nearest authorized technical assistance center Always use the same type spare parts e Do not touch any power cables during operation as the high voltage may cause an electric shock Warning e To prevent or reduce the risk of electrical shock or fire do not expose the unit to rain or moisture Do not open the unit within five minutes after switching off e The housing and lenses must be replaced if they are visibly damaged Installation The unit should be mounted via its screw holes onto the bracket Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating Make sure that the structure to which you are attaching the unit to is secure and is able to support a weight of 10 times of the unit s weight Always use a safety cable that can hold 12 times of the weight of the unit when installing the fixture The equipment must be installed by professionals and it must be installed in a place where is out of the reach of people and no one can pass by or under it 2 Features amp Technical Specifications Control Sound active Auto Master slave and DMX 512 modes DMX Channels 1CH 8CH 10CH Gobos 7 Gobos open Colors 7 Colors Open Electronic dimming 0 100 Compact size and light weigh
5. EQUINOX FUSION SPOT User Manual Order codes Black housing EQLED008 White housing EQLEDO008A Contents Safety Instructions Features amp Specifications How To Set The Unit Troubleshooting Fixture Cleaning 1 Ces A tad fee A N Please read the instructions carefully as they include important information about installation usage and WARNING maintenance Please keep this User Guide for future consultation If you sell the unit to another user be sure that they also receive this Unpack and check carefully that there is no transportation damage before using the unit e Before operating ensure that the voltage and frequency of the power supply match the power requirements of the unit It s important to ground the yellow green conductor to earth in order to avoid electric shock e The unit is for indoor use only Use only in a dry location e The unit must be installed in a location with adequate ventilation at least 50cm from adjacent surfaces Be sure that no ventilation slots are blocked Disconnect the mains power before replacement or servicing e Make sure there are no flammable materials close to the unit while operating as they may cause a fire hazard e Always use a Safety cable when installing this unit Do not carry the unit with its head only always carry it using the base e The maximum ambient temperature is 40 Don t operate it where the temperature is higher than this e
6. be carried out periodically to optimize light output Cleaning frequency depends on the environment in which the fixture operates damp smoky or particularly dirty surrounding can cause a greater accumulation of dirt on the unit s optics Clean with a soft cloth using normal glass cleaning fluid or mild soapy water e Always dry the parts carefully e Clean the external optics at least every 20 days
7. e display will blink Use the DOWN and UP buttons to choose the address to confirm To go back to the functions without any changes press the MENU button again Press and hold the MENU button for one second or wait for one minute to go back to the main menu CAN Channel Mode Press the MENU button to select Lhd Press the ENTER button and the display will blink Use the DOWN and UP buttons to select the Ch 1 Channel mode L4 8 Channel mode or UL4 10 Channel mode Once the mode has been selected press the ENTER button to confirm To go back to the functions without any changes press the MENU button again Press and hold the MENU button for one second or wait for one minute to go back to the main menu Nask Master Mode or Suid Slave Mode Press the MENU button to select SLM lcl Press the ENTER button and the display will blink Use the DOWN and UP buttons to select the SLI It Slave 1 SLI Ie Slave 2 or Mick Master mode Once the mode has been selected press the ENTER button to confirm To go back to the functions without any changes press the MENU button again Press and hold the MENU button for one second or wait for one minute to go back to the main menu Sand Show Mode Press the MENU button to select Shi tld press the ENTER button and the display will blink Use the DOWN and UP buttons to select the Sh show 1 or Sh ie show 2 or Shi 3 show 3 or SH H show 4 mode Once
8. t Voltage Fuse Power consumption Light source Dimension Weight Pan Tilt Power sockets XLR sockets 3 toh ae Rom y a 3 1 Control panel Display 100V 240V 50 60Hz T 2 5A 27W 1 x 12W white LED 159 x 147 x 265mm 2 5 kg 540 270 IEC IN 3 pin XLR IN OUT Shows the various menus and selected functions Button For DMX 512 linking Use a 3 pin XLR cables to link to the controller or to other units To select any of the given functions press the MENU button up to where the required function is showing on the display Select the function by pressing the ENTER button and the display will blink Use the DOWN and UP buttons to change the mode Once the required mode has been selected press the ENTER button to confirm To go back to the functions without any changes press the MENU button again Press and hold the MENU button for one second or wait for one minute to go back to the main menu The main functions are as below ADDR 001 512 CHND 1CH 8CH 10CH MAST MENU Selects the programming functions DOWN To go backward in the selected functions SHND Menu To go forward in the selected functions ENTER Confirms the selected functions Mains input SOUN SENS 000 100 LED Ce cee DISP INVERT Connection to the power supply DMX input output oo o TILT INVERT O Adde DMX Address Setting Press the MENU button to select Addr Press the ENTER button and th
9. t E25 Press the ENTER button and the unit will run a self test with its built in programs To go back to the functions without any changes press the MENU button again Press and hold the MENU button for one second or wait for one minute to go back to the main menu ue Software version Press the MENU button up to when the WRF is blinking on the display Pressing ENTER button and the display will show the version of software of the unit To go back to the functions press the MENU button c Sek Reset Press the MENU button to select IrSR amp Press the ENTER button and all channels of the unit will return to their standard position 4 How To Control The Unit 1 Master slave built in preprogram function 2 Universal DMX controller There is no need to turn the unit off when you change the DMX address as new DMX address setting will take effect at once Every time you turn the unit on it will show NG ron the display and move all the motors to their home position and you may hear some noises for about 20 seconds After that the unit will be ready to receive a DMX signal or run the built in programs 4 1 Master Slave Built In Preprogrammed Function By linking the units in master slave connection the first unit will control the other units to give an automatic sound activated synchronized light Show This function is good when you want an instant show You have to set the first unit as master and select show 1
10. the mode has been selected press the ENTER button to confirm To go back to the functions without any changes press the MENU button again Press and hold the MENU button for one second or wait for one minute to go back to the main menu S n Sound Mode Press the MENU button to select B Un Press the ENTER button and the display will blink Use the DOWN and UP buttons to select the an sound on or lo IF sound off mode Once the mode has been selected press the ENTER button to confirm To go back to the functions without any changes press the MENU button again Press and hold the MENU button for one second or wait for one minute to go back to the main menu Sein Sound Sensitivity Press the MENU and use the UP and DOWN buttons to select Sein and select the sound sensitivity between value O and 100 Press the ENTER button for confirmation after value selection To go back to the functions without any changes press the MENU button again LEd Led Display Press the MENU button to select LE Press the ENTER button and the display will blink Use the DOWN and UP buttons to select the no Led display on or aFF Led display off mode Once the mode has been selected press the ENTER button to confirm To go back to the functions without any changes press the MENU button again Press and hold the MENU button for one second or wait for one minute to go back to the main menu dE ID 1 Il Display In
11. version Press the MENU button to select d5 iF Press the ENTER button to change the mode d5 iF display normal it will be automatically saved after 8 seconds Press the ENTER button again to select the mode d5 iF display inversion To go back to the functions press the MENU button Press and hold the MENU button for one second or wait for one minute to go back to the main menu di iF Display normal mode is for floor standing the unit d bP Display inversion mode is for hanging the unit upside down PAn Pan Inversion Press the MENU button to select PAn Press the ENTER button and the display will blink Use the DOWN and UP buttons to select the no normal or YS pan inversion mode Once the mode has been selected press the ENTER button to confirm To go back to the functions without any changes press the MENU button again Press and hold the MENU button for one second or wait for one minute to go back to the main menu k fe Tilt Inversion Press the MENU button to select iLE Press the ENTER button and the display will blink Use the DOWN and UP buttons to select the INO normal or 425 tilt inversion mode Once the mode has been selected press the ENTER button to confirm To go back to the functions without any change press the MENU button again Press and hold the MENU button for one second or wait for one minute to go back to the main menu EPS Auto Test Press the MENU button to selec
Download Pdf Manuals
Related Search