User`s Manual
Contents
1. 27 HDD Format 27 Network 20 Security 20 Default Setup2. 9 POWG T 10 MDVR Installation Figure 11 Input Bridal Video Audio IN 2493 12 GPS Antenna aite ong 12 MDVR VISUAL ORIENTATION
3. 20 Administer Movie Files 21 Search the Recordings eme rrr nre rn nnn nnnm nnnm nennen 22 Search for Events 24 securcex SecurteX MDVR Manual Digital SETUP MENU 25 System 25 Date Ti
4. 29 USB Operation 30 Driver InfO 31 Camera Menu 32 Recording Schedule
5. 13 Front Panel Layout Recording Module 13 Handheld Remote Control Functions 14 Handheld IR Controller Key Functions 15 Numeric Keypad 15 Setup Menu Navigation 15 Other Key Functions
6. 25 Unit ID 25 Video Type 25 Audible Alarm 26 Priority Record 26 HDD O W
7. 33 Sensor Menu 34 System Information 35 SYSTEM FIRMWARE UPGRADE PROCEDURE 36 Hard Disk upgrade Instructions eere e rrr rre o 36 USB Drive upgrade Instructions nen ence rer rere eer ee 36 HARD DISK FILE STRUCTURE lt 37 GPS OPERATION OPTIONAL 3 38 ADVERTISEMENT SEQUENCE
8. 15 Pan Tilt Zoom Function Controls 16 SYSTEM START UP SHUT DOWN 17 System Start Up 9 urn rrr rrr nnne r nnnm nnn nne nn nnnm ceases nnnm nnn 17 System Login for Setup Functions err rrr nr nnn nnn nnn nnn nnn nnnm 17 Control Operations e nere rn nnn nnne n e nnnm nnn nnne nnn 18 MDVR SYSTEM LAYOUT 18 Administer Advertising Files 19 Administer Music Files
9. re eee rere rere nene 5 Mounting Enclosing the MDV 5 Installation Parts and Materials Required 2 6 MDVR Product VieWS 6 Dimensions 7 MDVR Package Contents 8 MDVR Installation Location Guidelines mnnn 8 MDVR Installation InStruCtIOnS
10. Q securtex Digital Ht 7 so AM MM BR MO i PA LINE NET HOO moare OVA Ve Firmware Version V6C A 01 031PRO Release Date 05 13 2006 SecurteX MDVR User Manual Mobile Digital Video Recorder With Streaming Advertising Output Copyright 1999 2006 SecurteX International Inc All Rights Reserved Copyrights 02006 SecurteX International Inc This manual is copyrighted with all domestic and international rights reserved No part of this document may be reproduced physically or electronically without written permission of SecurteX International Inc Trademarks SecurteX is the registered trademark of SecurteX International Inc Computer Software SecurteX products and software may include copyrighted computer programs stored in computer memory or on other media and all rights to this intellectual property are reserved No intellectual property may be reproduced in any manner or reverse engineered for use for any other purpose Manual Contents All contents of this manual are intended to be accurate in representing the features and operations of this product SecurteX International Inc assumes no responsibility for errors or omissions in this document modifications made to the technology after printing consequences of errors or omissions in this manual or consequences in the proper or improper use of this product Information and product specifications are subject to change without notice Se
11. Z Sensitive g 1 6 0 2 Apply Press ENTER on the Name field to display the virtual keyboard Enter the text name to identify the source of each Sensor connected to the unit The sensor label embeds with the video when the sensor is triggered The label also identifies the type of event when doing a quick search using ent option Press ENTER to turn Normal Close NC Normal Open NO or turn OFF an input sensor P Record is the priority recording mode User can select which external sensor input will trigger high frame recording Press ENTER to select between YES or NO If NO is selected the MDVR will continue to record at 1 frame per 2 seconds even when the sensor triggers The sensor entry will be made in the ent option without jumping to the high frame recording If the vehicle exceeds the low speed limit MDVR will start an audible alarm until the vehicle slows down the limit If the vehicle exceeds the high speed limit MDVR will trigger the alarm signal ALM LED turn on until the Admin password is entered to acknowledge the alarm MDVR is capable of capturing vehicle speed via GPS antenna or speedometer Browse between the settings of GPS or speedometer from the list Please note that the GPS antenna should be connected to the MDVR to receive satellite signals for speed For more information on capturing speed from speedometer please contact manufacturer Speak check is used to calibrate the offset speed when connec
12. APPLY and EXIT to return to the previous menu Company Name Limited 16 characters Press EXIT to return to the SETUP list Press the RIGHT ARROW key to change control to the CAMERA tab Press ENTER to open the Camera configuration screen 31 securcex SecurteX MDVR Manual Di Digital Camera Menu Press ARROW keys to move to each highlighted field and press ENTER to type into each field highlighted Quality Audio RecY N Cameral 1 No Camera2 1 No Camera3 1 No 4 1 No Camera Num 04 Rate FPS 30 Resolution CIF Time Insert ON Output Mode Camera View Apply Camera Name Type in the title for each camera to appear on the video display The camera label is embedded on the video 8 letters max Image Quality Press ENTER to enter the recording quality 1 is the highest quality Audio Rec Enable Disable for the audio record for each camera channel Camera Num Press ENTER to choose the number of cameras connected If 01 is selected channel 1 would be enabled If 02 is selected channels 1 and 2 will be enabled If 03 is selected channels 1 2 and 3 will be enabled If 04 is selected channels 1 2 3 and 4 will be enabled Recording Rate Press ENTER to choose between 2 4 8 15 or 30 frames second for NTSC 1 3 6 12 or 25 frames second for PAL Resolution Select between CIF and HD1 Time Insert Press ENTER to switch between ON and OFF to embed time date in the vi
13. Playback ePS Antenna VGA INPUT Setting or duart itining nlaybuck RS 32A 17 RS 232B RS232C Te Power Tor oniri panel Control Panel RS232D a 11 securcex SecurteX MDVR Manual Digital Input Bridal Video Audio IN The bridal description for the Input bridal supplied with your MDVR is as follows Label V 1 V2 V4 A 1 A2 A3 A4 Label Description V 1 Composite output for controlling the MDVR IR handheld is fully functional when connected to V 2 output V2 Composite output for live camera view only IR handheld is not operational when connected to V 1 output VGA VGA output for controlling the MDVR IR handheld is fully functional when connected to VGA output AL Audio output for left channel AR Audio output for right channel Note The sensors on the bridal are not reserved for any specific sensor User can connect any sensor type to any sensor number The sensor label Setup gt Event Setup Sensor label embeds on the video to differentiate among the external devices The maximum voltage capacity of sensors is 12 V DC Connect positive 12V DC to desired sensor number and ground to any ground connection provided on the bridal If multiple sensors are to be connected positive end of 12V DC connects to the individual sensor cable labeled as sen 1 sen 2 etc on the I O bridal and multiple gr
14. Ventilation Vibration Clearance Wiring Access Injury It is recommended that the MDVR be connected to the vehicle ignition Battery power is used only when the vehicle is running MDVR could drain any vehicle battery over time if the ignition is not turned off Connect only to appropriate power supply and ensure proper grounding of the circuit Protect unit and connections from environmental sources of moisture and liquid spills Do not install where unit temperature will exceed F140 F 60 C fall below 20 F 28 or store the unit where temperatures rise above 175 F 80 C Avoid direct exposure to sunlight Provide sufficient ventilation with a minimum of 6 inches cooling clearance to ensure proper operating temperature for the unit If necessary provide additional shock mounting to prevent damage and wear by excessive vibration Front clearance of 16 5 cm or 6 49 inch is required to slide the recording module from the mounting assembly Install where mounting assembly wires have sufficient clearance and will not be crimped or subject to wire insulation damages due to vibration Secure the MDVR so that passengers or drivers cannot tamper or damage the unit cameras wires or other accessories Do not mount where access to any other vehicle component will be restricted Install the unit cameras accessories and wires so that no injuries can be caused through impact with equipment during vehicle operat
15. ARROWS to select Adver and press ENTER The screen will show the menu as below Advertising Advertising file Browse to the previous page Browse to the first page Browse to the next page Displays the advertising file size Browses to the last page Play select the advertising file and press Enter to play While the advertising is playing the Handheld IR navigation keys increases decreases the volume Press gt will pause the advertising clips Pressing the gt key will resume the playback Press EXIT return to the advertising menu Delete the file Select the file to delete and press the right direction key gt The screen will show a confirmation dialogue as below Confirm to delete file Y N Select NO and press ENTER to cancel the delete operation Select YES and press ENTER to delete the file you have selected Note that once the file is deleted it cannot be recovered Press EXIT to return to the main menu 19 securcex SecurteX MDVR Manual Digital Administer Music Files To administer Music files use ARROWS to select O and press ENTER Music The screen will show the menu as below Take me to your heart J The unforgiving Music file name love you deeply Browse to the first page Browse to the previous page Browse to the next page Displays the music file size Browse to the last page Select the music file and press Enter to start pl
16. Choosing the asterisks will suspend the highlighted schedule Press the RIGHT ARROW key to enter values using the NUMERIC keypad into any time field Schedule 1 is the first of two possible ON OFF cycles that apply to any day in the period chosen under Date Schedule 2 is the second cycle for any day in the period There is no need to overlap times of Schedule 1 and Schedule 2 Ending at 23 59 of one day and beginning with 00 00 of the next day will provide continuous recording without interruption factory default setting Scroll to APPLY and press ENTER to save the new settings Press EXIT at any time to discard your entries and return to the previous menu Types CON constant recording MBR motion based recording SEN sensor triggered recording S M sensor triggered recording motion based recording together 33 Deleted ssp securcex Digital Sensor Menu SecurteX MDVR Manual Choose the EVENT tab and press enter to access the following menu The Event menu identifies sensor inputs by name and selects them for use Name NC NO OFF P Record Low Speed Limit High Speed Limit SPD Source SPD Check Camera Schedule Name Status 1 A NC Yes Yes Spd Source GPS 52 OFF Yes Yes Spd Check 000 OFF Yes Yes 999 OFF Yes Yes OFF Yes Yes hek OFF Yes Yes t OFF Yes Yes Low Speed Limit S8 OFF Yes Yes 000 KPH X Sensitive g 1 4 0 2 High Speed Limit Y Sensitive g 1 4 0 2 000
17. GENERATOR OPTIONAL 39 ADVERTISEMENT LOG VIEWER OPTIONAL 41 SETUP MANAGER OPTIONAL rr nr rrr 43 securcex SecurteX MDVR Manual Digital Product Components and Features System Recording Module and Mounting Assembly Ultra compact case extremely low weight high temperature resistance and vibration resistant Low Voltage low current architecture suitable for mobile mounting or fixed locations Quick Release removable Recording Module with tamperproof lock and secure controls Flexible Mounting Assembly for permanent connection to vehicle or permanent installation Individual wire connections for audio video power inputs outputs and accessory assemblies 12v 1Amp regulated power for use with cameras inputs outputs and accessory assemblies Full support for NTSC or PAL video inputs and outputs audio channels VGA display Communications supported through TCP IP network interface and USB connection to PCs Hand held IR controller with On Screen Display OSD for all operations of the MDVR 2 5 in mobile anti vibration and shock resistance HDD Video and Audio DVR Features and Capabilities e 4 channels for video input full motion 30FPS camera continuous or priority video recording and live display 4 channels for high fidelity digitally recorded synchronized audio matched to 4 video channels Continuous re
18. and parts are required to install yur MDVR Drill and bids for mounting in vehicle Screws bolts and vibration dampening washers as appropriate for mounting Wire cutters and wire connectors Voltmeter MDVR Product Views Front View Rear View without connections lt Assembled Chassis Details Height 4 9 cm 1 93 inch Width 17 9 cm 7 04 inch Depth 24 5 cm 9 64 inch Weight 3 25 lb Recording Module Removable Component Height 46 cm 1 81 inch Width 17 9 cm 7 04 inch Depth 17 6 cm 6 92 inch Module Removal Clearance 16 5 cm 6 49 inch Installation Clearance except base 10 cm 6 in Mounting Assembly Recording Module Removed SecurteX MDVR Manual securcex Digital MDVR Dimensions 179 0 175 0 securcex SecurteX MDVR Manual Digital MDVR Package Contents The following materials are shipped with the MDVR Ensure that you unpack all contents of your shipment and confirm receipt of the following items for each unit MDVR Recording Module and Mounting Assembly Power cable DB 37 AV input bridal DB 25 AV output Sensor input VGA out and RS232 connections Hand held IR batteries included USB Cable GPS Antenna with GPS equipped models only MDVR Installation Location Guidelines Following are the general guidelines for the installation purposes Choose a location in the vehicle that meets the following items Power Connection Moisture Temp
19. key to switch to the data entry area e Press the UP or DOWN ARROW key to scroll through the entry fields e Press the ENTER key to change the value or use the numeric keypad on the handheld controller for data entry areas where the numeric values are used e To save the changes scroll to APPLY at the bottom screen and press ENTER e Press EXIT to quit without saving changes a Date Time Press ENTER to access input settings Use ARROW keys to scroll through the options Date DD MM YY YY Enter with number keys Time HH MM SS Enter with number keys Date Mode US or Int l Press ENTER to switch between the date patterns Weekend Start Day Name Press ENTER to advance days Weekend End Day Name Press ENTER to advance days Record File Size Press ENTER to scroll through the settings The record file size is used to break down the recording clips in to smaller timings The available selections are 15 minutes 30 minutes 45 minutes and 60 minutes Scroll to APPLY and press ENTER to save the new settings Idle Time Idle time is used to revert back to the live cameras view if there is no activity from the Handheld IR The available options are 10 20 30 and 40 seconds Press ENTER to browse through the options b Unit ID Use the NUMERIC keypad to enter the unit ID between 000 to 999 This ID is used when logging in to the unit if security is enabled Scroll to APPLY and press ENTER to save the new settings Video
20. responding to an alarm condition Alarm can be caused by an external sensor trigger hard disk failure and video loss POWER Input power status LED ON confirms that unit is powered ERR Error status with USB connection LED blinks while USB connection problem occur ACC USB connection status LED blinking indicates data transfer using USB port CF USB Drive status LED ON indicates that USB Drive is inserted and the data is accessible 2 IR Receiver Lens Please ensure that the MDVR is installed where the handheld IR controller can be pointed directly to the IR receiver lens Point your handheld controller at the spot on the recording module allowing the unit in responding to commands from the controller 3 USB Port The USB 2 0 transfer port can allow you to transfer data files to and from MDVR using a PC or thumb drive 13 securcex Digital Handheld Remote Control Functions PAUSE STEF PLAY SLOW G PTZ a STOP RECORD AUTO PRE SET PEC ALL BRUSH F1 F2 F3 F4 Dum SecurteX MDVR Manual Numeric Input Keys Use the numbers to input values in the system setup screen or switch through the channels in live and playback Plus and Minus is used to increase setup values one by one CS OY Navagation Arrows Use the ARROW keys to move between selections input fields and icons Press ENTER to select and EXIT to return Next and previous is also used to increase or decrease volume when at live or ser
21. station 2 Once connected properly and placed outside the vehicle facing towards the sky you will find the GPS icon display on the surveillance screen as shown 13 43 X1 12158 34W at 3 The GPS data will appear on the screen as Nforlongitude e Wfor latitude e Vehicle Seed 4 The values of GPS are embedded on the video and could be retrieved by using the video playback function and pressing Enter key on the hand held while the video is been played back 38 securcex SecurteX MDVR Manual Digital Advertisement Sequence Generator Optional This utility only applies to the multimedia version of MDVR Advertisement Playback Sequence Generator xl Advertisment List Playback Sequence Attorney avi photography 2 avi motorola a vi motorola avi Henaissance avi Tulip City Flower vob motorola avi photography 2 avi Renaissance avi Train vob Fast 2 Furinus avi DELETE DELETE RESET GENERATE EXIT Interval 0 Minimum 0 FIG 3 0 The Advertisement Playback Sequence Generator is a Windows based utility designed to generate sequence for the advertisement playback The utility creates a sequence configuration file which maintains the pattern of advertisement playback Follow the here under instructions for generating the advertising sequence 1 Click ADD button to add the advertisement clips Browse for the advertisement content location and s
22. station there are three INPUT wires _ Green should be connected to the ignition switch Yellow should be connected to the 12 volt 3 amp from the positive battery terminal Yellow input is a fused connection Black should be connected to the ground to negative battery terminal POWER INPUT POWER OUTPUT There are two OUTPUT wires that can supply a number of dependant devices such as A monitor or cameras this power output provides a 12volt 500ma power source that can have a delayed shutdown that is controlled by the MDVR This will allow cameras to stay on after vehicle is turned off until the MDVR shutdown timer turns off the power feed Yellow 12volt 500ma power source for dependant devices Yellow input is a fused connection Black ground for dependant devices 10 5 SecurteX MDVR Manual Digital MDVR Installation Figure Camera F a Fa 9 Terrani ie DE inpar ipt los alle Camera 2 2 Em i UE ep F Audis ait 1 Camera 3 gt D DS y 4 A idee at 9 Camara 4 Sen Sem 0 Send Send Sen 5 Sen h 7 2 Inertia Ez TY menltor Input T Dive vimm only BU meno sakting 3 tanine GREY RJ 45 Connect with Network monitor TAS BR 1 Hon Setting 2 A dvmrLixnamzenL a
23. DVR HDD if there is no folder by the name create a new folder by right clicking on the mouse and choosing new gt folder Paste the file in the ADS folder by pressing ctrl v or going to Edit gt Paste Close the connection by double clicking the unplug or eject hardware icon in the system tray Select the USB Mass Storage Device and click Stop Restart the unit The system will start to upgrade automatically During the upgrade POW and ALM LEDs will start to flash Once completed the upgrade file will be deleted from the ads folder automatically USB Drive upgrade Instructions USB Thumb Drive can also be used to update the firmware in the unit Please follow the instructions to update the flash using the USB drive Insert a USB drive into the USB slot of your Windows PC Drive letter appears Using Windows Explorer format the USB drive as FAT32 format All the data will be permanently erased from the USB drive Copy the new firmware romfs dvr file on the USB drive Remove the USB Drive from the PC and insert it into the slot on your MDVR while the power is off d e Upon turning the power on the unit will automatically start to update the new firmware from the USB drive During the upgrade POW and ALM LEDs will start to flash Remove the USB drive from the Mobile unit once unit is up and running WARNING The upgrade procedure requires no power interruption The USB drive slot on the unit is a necessary opening o
24. RD IN A SAFE PLACE 17 5 diria SecurteX MDVR Manual Digital Control of System Operations The MDVR has two versions of the firmware e Security only version e Multimedia version Security only version In the security only version MDVR has the capability of performing the Digital Video Recording only The User Interface is different from Fig 2 0 With the security only version the User Interface will be as follows al hd d V SecuUPtex Digital MDVR comes with the Security only version by factory default To update the DVR with the Multimedia version please consult with your sales associate There is no hardware update required for the multimedia features Multimedia version In the multimedia version MDVR has the capability of performing Digital Video Recording along with the advertisement movies and music without interrupting the basic purpose of the surveillance system With the multimedia version the User Interface will be same as Fig 2 0 MDVR system layout Press SETUP on the IR controller if the security is disabled the on screen menu will be displayed not applicable if the output is connected to V 2 e Navigate through the options using the ARROW keys e Select the desired option using the ENTER key e To return to the previous menu from any screen use the EXIT key securcex SecurteX MDVR Manual Digital Administer Advertising Files To administer Advertising files use
25. S and press ENTER to delete the file you have selected Note that once the file is deleted it cannot be recovered Press EXIT to return to the main menu NOTE The movies and advertisement contents require the DivX codec formatted files Please confirm that the uploaded media files are in DivX codec for the correct operation Details of supported file formats are listed below Folder Name Contents Description Remark Ads List the contents of the Supported format advertisement files MPEG4 MPEG2 MPEG1 File extension VOB MPG AVI DAT List the contents of the movie Supported format files MPEGA MPEG2 MPEG1 File extension VOB MPG AVI DAT List the contents of the music Supported format files WAV WMA 21 securcex SecurteX MDVR Manual Search the Recordings To search the recordings use ARROWS to select Search press ENTER Enter the required information on the screen The MDVR selects the current date by default he oldest record time i The main screen allows the user to enter the specific dates for the playback The oldest record time is a quick reference for the oldest recording available to the MDVR Using the numeric keypad of the handheld IR controller or keys to increase the values fill the appropriate data Year Range is 2000 to 2099 Only the last 2 digits of the year are changeable Ex 03 for year 2003 Month Range is 01 12 fo
26. TURDAY C YYYYIMMIDD Machine ID fo 000 999 Video Type lt PAL C NTSC Audible Alarm YES NO HDD YES C NO Priority Record Enable C Disable Driver information Security Enable Password Company Name company User Password Driver Name driver name Re Enter Vehicle Number vehicle number Admin Password Re Enter SAVE EXIT FIG 5 1 43 securcex SecurteX MDVR Manual Digital The Setup allows user to create a user preferable settings for MDVR FIG 5 1 shows the user interface for creating the setup file to be applied on the MDVR via a USB Drive System Camera Schedule Event and Network tab allows making changes as per user desire The explanation of each individual tab could be found under MDVR System Layout section f of the manual Click here tn get a list af available drives Select the Removable Disk from the list File name setup Save as setup file bin Cancel 2 FIG 5 2 Once the changes has been completed click on the SAVE button on FIG 5 1 A save as window will come up on the screen FIG 5 2 Connect the USB Drive to the workstation which is running the Setup Manager utility The USB Drive appears as a removable disk in most of the system Please check the manual provided w
27. Type Select the appropriate camera signal type Select between Camera Scheduis Event Setup PTZ NTSC US or PAL International standards of video Date Time Video Display Type recording Scroll to APPLY and General ara Vide Type Audible Alarm Priority Record press ENTER to save the new settings HDD ow HDD Format Network Security Default Setup USB Operation Driver Info 25 5 SecurteX MDVR Manual Digital d Audible Alarm Press ENTER to enable or disable alarm buzzer control panel accessory only The buzzer will beep when the following conditions are met e External sensor trigger e Hard disk failure e Video loss Note The audible alarm feature applies to control panel accessory only Scroll to APPLY and press ENTER to save the new settings N SEGUE Camera Schedule Event Selup PTZ Date Time Systems Diagnostics YES General Camera Failure NO Video Type Sensor Trigger NO Priority Record HDD 0 W HDD Format Network Security Default Setup USB Operation Driver Info e Priority Record Press ENTER to enable or disable Priority Record Priority Recording records one frame every two seconds when no external sensor is sensed by the unit When a sensor triggers through a sensor input the unit automatically starts to record up to the user selected frames second on all cameras User can select between the timings before and after the e
28. ach screens Each MDVR includes a handheld Infra Red IR controller that allows the user to transmit commands to recording module and display on screen control menu either on a composite monitor V 1 output or a regular monitor VGA securcex SecurteX MDVR Manual Digital Handheld IR Controller Key Functions 1 Numeric Keypad 0 9 keys During setup number keys are used to input values For viewing channels 1 2 3 and 4 use 1 2 3 and 4 on numeric keypad respectively keys During setup plus and minus are used to select next or previous values During real time view of individual camera after you pressed X key use plus and minus to make the color adjustments Pressing DEO will navigate through the color adjustment options Please be advised that the unit needs to stop recording before any color adjustments are made 2 Setup Menu Navigation V Up Down directional keys Moves selection up and down in setup menu gt 4 Left Right directional keys Moves cursor left or right in setup menu ENTER key During setup select and save entry During live view displays time on screen During Playback displays the text or hide the text associated with video on the screen 3 Other Key Functions LOGIN LOCK If the security is enabled in the setup use LOGIN LOCK or SETUP key to enter the user setup POWER The Power button can reset the DVR in to sleep mode unit will stop recording while in
29. at the screen to save the sequence file For the MDVR to play back in the correct sequence the file name has to be advertisement and the format has to be DO NOT CHANGE THE NAME OR TYPE OF THE FILE ELSE THE SEQUENCE OF THE ADVERTISMENT CLIPS WILL NOT WORK 7 This feature is under development 8 To exit the sequence generator application click on EXIT There are two methods to upload the sequence configuration file on the MDVR 1 When the advertisement cfg file is created save it to the thumb drive along with the required advertisement contents Establish a USB connection in Host Mode with your MDVR Follow the instructions under SETUP USB OPERATION for more details on establishing the USB connection in Host Mode The files would automatically be copied upon successful connection with thumb drive Once the data is copied indicated by the status bar exit the USB MODE screen and the advertising media contents would automatically start to play back in the programmed sequence if advertisement mode selected under CAMERA OUTPUT MODE when the unit restarts Create a USB connection using the USB cable provided with your MDVR package For detailed instructions on the USB connectivity refer to SETUP USB OPERATION in DEVICE MODE Save the advertisement cfg file in the ADS folder of MDVR Hard disk drive Also copy the media clips in the ADS folder Exit the USB MODE screen and the advertising media contents would a
30. aying the file While the music is playing the Handheld IR navigation keys increases decreases the volume Pressing gt will pause the music Pressing the gt key will resume the playback Press EXIT return to the music menu Delete the file Select the file to delete and press the right direction key gt Select NO and press ENTER to cancel delete operation Select YES and press ENTER to delete the file you have selected Note that once the file is deleted it cannot be recovered Press EXIT to return to the main menu 999 20 Securtex SecurteX MDVR Manual Digital Administer Movie Files To administer Movie files use ARROWS to select Movie and press ENTER The screen will show the menu as below Star wars Movie name Browse to the first page Show the movie file size First EN Last Browse to the last page Browse to the next page Browse to the previous page Select the movie file and press Enter to start playing the file Deleted csp While the movie is playing the Handheld IR navigation keys w increases decreases the volume Pressing gt will pause the movie Pressing the gt key will resume the playback Press EXIT return to the music menu Delete the file Select the file to delete and press the right direction key gt Select NO and press ENTER to cancel delete operation Select YE
31. cording while in the playback mode User friendly criteria to playback the events associated video only Automatic timer to resume the live display if the unit is idle for user defined timings MPEG 4 video compression for high quality low storage recording and playback User selectable settings for quality and audio record enable disable for each video channel 12v power supply for multiple devices such as cameras sensors relays and any other accessories Selectable frame rate with event triggered burst recording speeds up to 30FPS camera Multiple alarm inputs with selectable pre alarm and post alarm record timings TV output channel for live video and recorded video viewing Streaming Video Output for Multimedia Contents DVD quality steaming audio video with NTSC or PAL composite or VGA output e Flash card USB media update e Independent operation of DVR and streaming advertising simultaneously Remote Connection Capabilities e Handheld Infra Red controller with OSD for quick access to recorded video and settings menus USB connection for file transfer PC based file transfer and settings management e PC Based Client software for live viewing playback video playback events associated video and downloading capabilities Accessory Modules for MDVR e Video Interface Module including GPS location and speed e Vehicle Motion Manager includes 3 axis inertia sensor to determine video matched motion events e Video event search allows inte
32. curteX Contacts Please promptly report corrections required in this document comments or requests for information to your SecurteX Digital dealer reseller or contact SecurteX Digital directly at SecurteX International Inc Telephone 937 312 1414 982 Senate Drive FAX 937 312 1418 Centerville OH 45459 Toll Free 888 866 2580 www securtex com support securtex com Warranty and Repair Information Contact your SecurteX reseller concerning warranty terms and conditions covering your SecurteX MDVR This unit must have been installed by a qualified installer and used in conditions as specified in this manual to qualify for warranty repair SecurteX reserves the right to repair or replace products returned prepaid for warranty service Any product arriving must have a Return Material Authorization RMA that includes product number serial number nature of the problem return shipment address and RMA number obtained in advance from SecurteX Customer Support SecurteX takes no responsibility for any shipment arriving without an RMA form and number SecurteX Customer Support support securtex com Telephone 937 312 1414 Prompt 1 ys SecurteX MDVR Manual Digital TABLE OF CONTENTS PRODUCT COMPONENTS AND FEATURES 4 INSTALLATION GUI DELI NES TL 5 Installation Environment Requirements
33. d pressing Enter again will hide the text giving a clear picture to view The text on the video shows the following fields Driver ID Vehicle ID Camera label GPS coordinates if available Date Time Sensor label if sensor was activated in the setup and sensor activity happens the user definable sensor labels get embedded on the video for 10 seconds User can also switch channels of video by pressing the desired number of channel on the handheld IR numeric Keypad User can start to download the video on a USB Drive while viewing the playback Follow the here under procedure to perform the operation Stop the recording of the DVR by going in the setup gt Schedule Insert the FAT 32 formatted USB Drive for the CF formatting instructions please review the Compact Flash Card Management page in the manual Select the clip want to playback While viewing the file press the CF key on the IR to start downloading the file on the USB Drive A status indicator is shown on the top right corner of the screen Press CF key again to stop the download 23 _ Deleted T lt sp gt lt SD gt lt SD gt lt SD gt lt SD gt securcex SecurteX MDVR Manual F Digital To search for events use ARROWS to select Event and press ENTER Search for Events The screen below will display sensor triggered events Scroll down the list with the ARROW keys to find the event you wish to play After the entry is highlighted
34. deo Output Mode The MDVR is capable of displaying multimedia advertising when the unit is powered on User can select the option of displaying live cameras Camera View on the monitor or automatically start streaming the advertising clips Adver Autoplay Press ENTER to select between Camera View or Adver Autoplay mode Scroll to APPLY and press ENTER to save the new settings Press the RIGHT ARROW key to move to the Schedule tab and press ENTER 32 _ Deleted lt sp gt securcex Digital SecurteX MDVR Manual Recording Schedule Press ENTER to activate ON recording schedule Press the ARROW keys to change between any fields in the menu Date Single Day Every Weekday Schedule Type Schedule 1 Schedule 2 Every MBR 00 00 23 59 00 00 00 00 00 00 00 00 Con 00 00 00 00 00 00 00 00 00 00 00 00 cnm Con 00 00 00 00 Con 00 00 00 00 n Con 00 00 00 00 Con 00 00 00 00 sues Con 00 00 00 00 Con 00 00 00 00 00 00 00 00 _ 00 00 00 00 00 00 00 00 Con 00 00 00 00 Apply Press ENTER to change the period of time to control the recording schedule Choose the name of a day to create a recording schedule Choose Every to apply a schedule to every day of the week Schedule will only apply Weekdays weekday start and weekday end can be defined in the SYSTEM tab
35. e Select START to jump to the specific time GOTO NEXT a Increase volume while playback if audio is recorded or multimedia playback PREV Decrease volume while playback if audio is recorded or multimedia playback REW 4 Rewinds the video while playback X2 and X 4 modes available FWD gt Fast forward the video while playback X2 and X4 modes available Move between one clip to another while playing back recordings 1 2 4 Reserved for future use 4 Pan Tilt Zoom Function Controls ZOOM IN ZOOM OUT IRIS IRIS FOCUS FOCUS ESSO 16 securcex SecurteX MDVR Manual Digital System Start up Shut down System Start Up After connecting the MDVR to a vehicle power supply turn on the vehicle ignition and the unit will automatically start recording Power is normally supplied to the MDVR as long as the vehicle ignition is ON Start up process takes approximately 10 seconds and completes as follows e Ashort series of start up diagnostic test to ensure system stability e Recording from connected cameras begins immediately factory default e Display only view of the cameras is immediately available to be viewed through Video Output 2 in quad view No handheld IR controls are accepted by MDVR when video output 15 connected to V 2 e Administrative view of the system is available to be viewed through Video Output 1 Al the handheld IR controls are accepted by MDVR
36. e allows the user to see the contents of the setup bin file It does not allow the user to make changes or create a new setup bin file EXIT The exit option allows the user to exit the application A confirmation message will be displayed Click Yes to exit the application or no to return back to the Setup Manager application 45 securcex SecurteX MDVR Manual Digital SecurteX Digital 982 Senate Drive Dayton OH 45459 Phone 937 312 1414 Fax 937 312 1418 http www securtex com 46
37. e analysis the files would have the extension of raw To select multiple files hold on the ctrl key and left click on the files Once the files are selected click on Open Advertisement Log Viewer E FILE LIST 2 Fast 2 Furious raw E Fast 2 Furious raw YR MO DAY HR MIN Angels raw Attorney raw Flower raw FIG 4 3 4 Click on the desired files to see their frequency of play back The application displays year month day hour and minutes when the advertisement clips were played back by MDVR A sample report is shown in FIG 4 3 Once completed click EXIT to quit the application 42 securcex SecurteX MDVR Manual Digital Setup Manager Optional This utility is designed to change the MDVR setup without using the IR Hand held via USB Drive Setup Manager Fig 5 0 The Setup Manager is a Windows based utility designed to program the MDVR from the PC without using handheld IR via USB Drive Follow the here under instructions for MDVR settings using a USB Drive 1 Setup gt Allows user to go in the setup and create a new setup binary file to be uploaded to the MDVR via USB Drive 2 Modify gt Allows user to change an existence setup binary file 3 Display gt Allows user to view an existence setup binary file 4 Exit gt Exits the application SETUP SYSTEM CAMERA SCEDULE EVENT NETWORK Date Mode Weekday Start SUNDAY MMIDD YYYY Weekday End SA
38. elect the desired file To select multiple files hold down the CTRL key on your keyboard and select desired files The application only accepts AVI MPG VOB DAT file formats 2 Once the files are added to the Advertisement List select the first file to be played back in the advertisement sequence and use 2 button to move the file in the Playback Sequence The advertisement clips will be played in the order that appear in the Playback Sequence list When the last advertising clip is played back the sequence starts again Note In the above example after photography 2 avi is played back the Motorola avi will be played twice before the Renaissance avi is played back Use the repetition method to playback same clip more then once 39 securcex SecurteX MDVR Manual i Digital 3 To remove any advertisement from the Advertisement List select the file and click DELETE button Note that deleting the file from the Advertisement List does not delete the actual file from the hard disk 4 To remove any advertisement from the Playback Sequence select the file and click DELETE button Note that deleting the file from the Playback Sequence does not delete the actual file from the hard disk 5 To delete the sequence and start from beginning click the RESET button 6 When the sequence is completed click on GENERATE to generate the configuration file A Save as window will appear
39. enu Selecting NO will not require a password in order to access the setup menu a An Administrator with full rights and a User with only playback rights can be created b Press ENTER to switch between YES and c Press the down ARROW key to highlight the User password entry line Enter the desired password and confirm The password must be EIGHT NUMBERS long Use the NUMERIC keypad on the handheld to input the values d Press the down ARROW key to highlight the administrator password entry line Enter the desired password and confirm The password must be EIGHT NUMBERS long Use the NUMERIC keypad on the handheld to input the values The unit has a built in SUPER Password in case the ADMINISTRATIVE password does not System work It is a back door entry to the unit which cannot be changed The password is 19810512 Date Time Password Enable IT IS HIGHLY RECOMMENDED THAT THIS Ganaval User Password PASSWORD IS RECORDED AND STORED IN A Video Type Re Enter SAFE PLACE Audible Alarm Priority Record HDD 0 W Admin Password HDD Format Re Enter Network gt curity Default Setup Password must be 8 digits long USB Operation Driver Info Apply 28 securcex Digital j Default Setup SecurteX MDVR Manual User ARROW keys to switch between YES and Selecting YES will restore the default factory settings System Default settings Options System Date Time Weekda
40. from direct contact with excessive humidity and moisture rain or other sources of liquid spills Do not install on a recessed surface where liquids may accumulate or under surfaces where liquids may drip h Do not handle the MDVR with wet hands while standing in water or while in contact with other sources of water or moisture that could create a shock hazard i Install the MDVR out of direct sunlight and away from direct sources of heat j Donot mount the unit to a surface subject to excessive vibration Mounting Enclosing the MDVR a MDVR may be operated in a totally sealed enclosure with no cooling airflow ensure that the operating temperature of the MDVR does not exceed 140 F 60 C or that the standing temperature does not exceed 175 F 80 C The minimum operating temperature for the MDVR is 20 F 28 C If the minimum temperature is expected to exceed connect an auxiliary heat source b MDVR assembly may be mounted on a flat surface provide at least 6 inches 15cm clearance for cooling airflow around the remaining sides to provide adequate heat dissipation C To clean any surface of the MDVR use only cleaners approved for electronic equipment or components Avoid chemical or household cleaners d Disconnect MDVR mounting assembly from the power supply when not in use for extended period of time Q secure x SecurteX MDVR Manual Digital Installation Parts and Materials Required The following common tools
41. ion Ensure that all transportation regulations are followed to avoid passenger injury should they come in contact with the installed equipment securcex SecurteX MDVR Manual Digital MDVR Installation Instructions Follow these guidelines when installing the MDVR Remove all components provided in the package Disconnect any power supply or device Slide the recording module from the mounting assembly Locate a proper spot to install the mounting assembly and provide any additional shock absorption if necessary Locate a reliable electrical ground point in the vehicle Make all connections to the rear of the mounting assembly Place the mounting assembly and permanently attach to the supporting structure using screws Slide the recording module on to the mounting assembly to ensure proper clearance Connect the provided bridals to your MDVR Connect power source and turn the vehicle ignition to test the unit Observe completion of the unit power up procedures as described in section labeled as System Startup and Shutdown Apply any information labeling required by local statute for video surveillance securcex SecurteX MDVR Manual Digital Power NET NN j T Db37 OC 0625 gt n GPS OYES ONO GPS ANT 0206 406 0606 TN psoe D100GDHGST N C JJ Wim E NU UN FC _ S N Y60505 1101000 lt J On the back side of the MDVR docking
42. ith the USB Drive if your USB Drive does not appear as a removable disk Format the USB Drive using FAT32 format For detailed instructions on formatting the USB Drive please consult the System Firmware Upgrade Procedure in this manual Select the removable disk from the list of available drives Click on SAVE option on the screen DO NOT CHANGE THE NAME AND TYPE OF THE FILE MDVR ONLY ACCEPTS setup bin FOR THE NEW CHANGES Save the file as the default type and name 44 ys diria SecurteX MDVR Manual Digital MODIFY SYSTEM CAMERA SCEDULE EVENT NETWORK Weekday Start SUNDAY Weekday End SATURDAY C NYOYTYYIMMIDD Machine ID 000 999 Video Type NTSC Audible Alarm YES NO HDD YES C NO Priority Record Enable Disable Driver information Security Enable Password Company Name company Heine User Password Driver Name driver name Re Enter Vehicle Number vehicle number Admin Password He Enter FIG 5 3 The modify option allows user to edit an existing setup bin file Click on MODIFY in FIG 5 0 to modify an existing setup FIG 5 3 shows the user interface of the application Click on OPEN to open the setup bin file Once opened user can make any changes desired When the changes are completed save the setup bin file on the USB Drive and apply new settings on the MDVR DISPLAY The display featur
43. lligent searching of recorded video based on event logs securcex SecurteX MDVR Manual Digital Installation Guidelines Installation Environment Requirements In order to ensure the reliable operation of your Mobile Digital Video Recorder MDVR within the terms of the product warranty follow these instructions for installing your MDVR a Follow all electrical codes adhere to all requirements for your vehicle and for other connected equipment while installing and operating the MDVR b Use only a regulated 12 volt DC or 24 volt DC 1 5 2 Amps certified power supply for installation in vehicles The MDVR can handle power ranges from 7v 28v DC Follow the installation and operating instructions provided to ensure a steady and reliable source of installation Handle all electric equipment and connections properly to avoid injuries Even though the recording unit may not be turned on live power exists in the mounting assembly and precautions should be taken to avoid shock Disconnect the power supply from its source before connecting or disconnecting the MDVR mounting assembly from the power supply d Do not attach any device specified or approved by the manufacturer e Do not attach powered input leads that exceed 12 volt DC at 1 5 Amps OR 5 volt DC at 1 5 Amps supply on any one connection f Attach the MDVR ground cable to the vehicle correctly to complete the power circuit g Install the MDVR in a dry location shielded
44. mats the USB thumb drive System Date Time Hard Disk Format General HDD No HDD Video Type Audible Alarm Start Return Priority Record Are you sure to format HDD HDD 0 W All recording will be lost and the DVR would restart when Network exit key is pressed Security Yes No Default Setup ms USB Operation Driver Info Selecting START on this setting will erase all recorded video on the unit or the data on USB drive Press ARROW keys to either choose STAHT reformatting the disk or choose without formatting Press to format or return Press EXIT to return to the settings 2 Q securcex SecurteX MDVR Manual Digital h Network You must enter a static IP address to use Network capabilities Please talk to your local Internet Service Provider for the information Use NUMERIC keypad to enter the TCP IP address information Setup IP address Enter the static IP address Setup Mask Enter the subnet mask Setup Gateway Enter the gateway Scroll to APPLY and press ENTER to save the new settings Date Time General IP Address 192 168 000 131 Video Type Mask 255 255 255 000 Audible Alarm Gateway 192 168 001 001 Priority Record HDD 0 W CenterlP 192 168 000 099 HDD Format DomainName N AU ork Security Port 65535 Default Setup USB Operation Driver Info Apply i Security Selecting YES will require a password in order to access the setup m
45. n the unit Please ensure that no liquid is spilled in the slot In addition do not install the system where dust and dirt are likely to contaminate the opening 36 Digital Hard Disk File Structure Hard Disk file structure Using the USB to connect the DVR to PC the file structure of the unit looks like alarm bin below bak ads record Folder Name Contents Description HEN Contains advertisement files Ads log Log file for tracking all the advertisement playback history by MDVR Contains movie files Contains music files Contains DVR recordings Time bin Alarm bin Operation bin System files 37 SecurteX MDVR Manual operation bin time bir Remark Supported format MPEG4 MPEG2 MPEG1 File extension VOB MPG AVI DAT Use log viewer application to open this file provided by SecurteX Supported format MPEG4 MPEG2 MPEG1 File extension VOB MPG AVI DAT Supported format WAV MP3 WMA Requires client software to playback video from PC All the record file are watermarked for authenticity DO NOT DELETE THE FILES THESE ARE NECCESSARY FILES NEEDED BY THE SYSTEM TO FUNCTION PROPERLY s SecurteX MDVR Manual Digital GPS Operation Optional This feature is only available with the system ordered with GPS 1 To enable the feature make sure to connect the GPS antenna to the GPS connection port located at the back of docking
46. ound cables can be connected to individual ground on the I O bridal GPS Antenna MDVR is capable of embedding GPS coordinates and speed on the video MDVR uses a passive GPS technology which does not require any service subscription from local service provider Passive GPS receives the signal from satellite as latitude longitude and speed after negotiating with the satellite It takes approximately 3 5 minutes after boot up to start the negotiation process with the satellite to receive the signals When the negotiation is completed a graphical icon at the live display shows the availability of GPS If the negotiation fails an X is marked on the graphical icon showing the failure of satellite communication Connect the GPS antenna provided with your set if ordered GPS equipped DVR and hang it such that the front of the antenna is upwards facing the sky GPS Antenna 12 securcex SecurteX MDVR Manual Digital MDVR Visual Orientation Front Panel Layout Recording Module MOBLE VE amp 1 LED Indicator and Status Display 10M 100M Network connection speed LED ON for 100M bps LED off for 10M bps LINK ACT Network connection activity light LED blinking indicates data transfer HDD Hard disk drive activity LED ON indicates system is reading writing to hard disk REC Video recording status LED ON indicates recording is on for at least one channel ALM Alarm status LED ON indicates unit is currently
47. press ENTER to play the video E January ED Number Date Time Sensor Type 001 2005 01 15 14 15 19 FDOOR 002 2005 01 16 14 30 49 METER 003 2005 01 17 14 50 00 SPEED 004 2005 01 18 15 30 46 REAR 003 2005 01 19 15 52 48 PANIC 002 2005 01 19 18 12 05 DDOOR Page Down Page Up Fig 2 1 Pp v While the video is playing back pressing Enter on the IR will show the associated text on the channel and pressing Enter again will hide the text giving a clear picture to view The text on the video shows the following fields Driver ID Vehicle ID Camera label GPS coordinates if available Date Time Sensor label if sensor was activated in the setup and sensor activity happens the user definable sensor labels get embedded on the video for 10 seconds Once the video associated with the event is finished playing back the system displays the Fig 2 1 to select other event 24 Deleted lt 5 gt 1 Q securcex SecurteX MDVR Manual Digital SETUP Menu To access the SETUP menu use ARROWS to select Setup and press ENTER The SETUP menu consists of five tabs Each tab is designed to facilitate the performance adjustments preferred by the user 1 SYSTEM Press ENTER to change system setup information e Use ARROW keys on the handheld IR controller to scroll through the list of items on the left column e Press ENTER to select the option The setting area will appear on the right column e Press the RIGHT ARROW
48. r the corresponding month number Day Range 01 31 for the corresponding day of the recording Hour Range 00 23 for the appropriate hour to begin the search Minutes Range 00 59 to narrow the search _ Press Setup on the hand held IR remote to get the calendar The yellow color indicates the days of recording The blue color indicates no recording After entering the start time move to the START and press ENTER on the handheld IR controller The recorded video history beginning at the time chosen will be listed on the screen Use the arrow keys to advance to the starting time Select the entry and press ENTER to playback the video file 22 secure x SecurteX MDVR Manual Digital Date of recording Timing range Number of cameras recorded Recorded Frame rates and quality of video H 09 05 2005 02 59 03 00 Four Pic 30 1 Browse to the first page Browse to the next page Show the movie file size Browse to the last page While the selected video file is playing back user can select the video to jump to the specific time in the clip Press Goto on the handheld and a selection bar would appear at the top left of the screen with a reference point about the length of the clip Input the desired time and select Start to go to the required minute While the video is playing back pressing Enter on the IR will show the associated text on the channel an
49. ted to the speedometer For more information on capturing speed from the speedometer please contact the manufacturer 34 Deleted ssp fi 5 SecurteX MDVR Manual Digital System Information Press ENTER to assess the System Information menu This menu displays DVR Information that may be required for technical support In addition information regarding the installed hard disk also displayed In this menu user can clear the log information of the DVR b System info Version No V6C A 01 031 Hard Disk Information Remaining capacity in HDD 042 Hours Clear log file Event Log Ads Log All Log Clear Event Log Ads Log select this option and press Enter the DVR will prompt a confirmation message Select YES and press Enter This will clear the log file from the unit Select NO to cancel to clear the log file Logs select this option to clear both Event Log and Advert Log file simultaneously WARNING The log entries in the EVENT are also a part of the log file Deleting the Event log file will also delete the entries in the EVENT 35 securcex SecurteX MDVR Manual i Digital System Firmware Upgrade Procedure There are 2 methods to upgrade the firmware in the MDVR Hard Disk upgrade Instructions a b c Connect and Enable the USB Copy the romfs dvr file by pressing ctrl c or going to Edit gt Copy Open the ADS folder on the M
50. the sleep mode Switch the output mode to VGA has to be disabled for the manual recording to work Swapping between multi channel and single channel monitor while in surveillance screen only Press this button to change the number of display channels By pressing the key display channel change the sequence of four one two three four Brightness contrast color adjustment per channel While in surveillance screen go to full screen on individual camera by pressing the corresponding number on numeric keypad of IR Press to activate the function Use button to change the values User can adjust the values for each channel individually Please be advised that the unit needs to stop recording before any color adjustments are made SETUP System setting screen may require login EXIT Returns to the previous menu Pressing exit key takes one step back in the until the live monitor screen is displayed 15 securcex SecurteX MDVR Manual Digital 3 Other Key Functions Continue PAUSE STEP Freezes playback to a single frame and can advance one frame at a time To advance the frame press Pause Step to move frame by frame Press EXIT to return to normal playback speed Starts Resumes playback from any other mode FF RR Frame by Frame etc return to normal playback speed gt Quick search mode within the file playing back Select the desired file and start to play Press GOTO button and input the desired tim
51. tructure towards the end of the manual HOST MODE Using the ENTER Key on the handheld IR select the HOST MODE The HOST allows an external USB jump drive to be connected Once the connection is established all the contents of the jump drive is automatically uploaded to the MDVR ads folder For a complete file description of the MDVR hard drive layout please look at the chapter labeled as Hard Disk File Structure at the end of the manual NOTE for USB Operation To maintain the live connection between Windows PC and MDVR via USB cable the Device Mode menu screen needs to stay active Exiting the option will interrupt the connection System Date Time General Video Type Connect to PC Audible Alarm Priority Record HDD 0 W HDD Format Network Security Default Setup Press apply to activate Apply 30 E Q securcex SecurteX MDVR Manual Digital l Driver Info The DRIVER INFO is used to store the following text information into the unit Company Name Vehicle Number and Driver Name Use ARROW keys to select the option for modification Press ENTER at the highlighted line System Date Time General Company Name Video Type Vehide Number 123 Audible Alarm Driver Name Priority Record HDD 0 W HDD Format Network Security Default Setup USB Operation The screen will pop up a text entry keyboard Use Arrows to choose characters press ENTER to type Press
52. utomatically start to play back in the programmed sequence if advertisement mode selected under CAMERA OUTPUT MODE when the unit restarts Note that this application only generates the sequence and does not upload download the media contents automatically Users have to upload the advertising contents by either a USB Drive or a USB link HOST or DEVICE mode 40 securcex SecurteX MDVR Manual Advertisement Log Viewer Optional This utility only applies to the multimedia version of MDVR Pe Adv ng rtise ment Log Viewer CSFILE LISTI log record is bin al bin time FIG 4 1 2 The MDVR hard drive comes up as a new hard drive on the workstation connected USB Cable FIG 4 1 shows the contents of MDVR hard drive Copy the ads log folder by pressing ctrl c or going to Edit gt Copy Paste the folder to your workstation by pressing ctrl v or going to Edit gt Paste Once completed press Exit on the MDVR hand held IR The MDVR will restart to resume normal operation 41 securcex SecurteX MDVR Manual igital Right Click on File List to add the file YR MO DAY HH MIN i ee eel FIG 4 2 3 Open the advertisement log viewer application by double clicking on ads log viewer exe Right click on FILE LIST and a drop down menu will be displayed as shown in FIG 4 2 Select add file option and browse for the ads log folder Select the desired advertisement clip to perform th
53. vent for high frame rate recording Use the Numeric key pad or ARROW down to the second settings to define the time duration of full rate recording after and before the trigger is over Scroll to APPLY and press ENTER to save the new settings Camera Schedule Event Setup PTZ A sistem int N Date Time General Video Type Audible Alarm Priority R cord HDD 0 W HDD Format Network Security Default Setup USB Operation Driver Info Priority Record Enable Full rate recording time when event is detected 030 30 3005 Pre record time when event is detected 10 10 155 26 securcex Digital f SecurteX MDVR Manual HDD O W Press ENTER to switch between ON and OFF When the overwrite feature is ON the MDVR will continue the recording If the HDD is full the oldest data is removed for the new recording When the overwrite feature is OFF recording will stop when the HDD is full You must erase all the recordings using the Setting HDD Format to resume recording Scroll to APPLY and press ENTER to save the new settings Camera Schedule Event Setup PTZ system Into N Date Time Auto overwrite for HDD General Yi Video Type Audible Alarm ALN Record HDD Format Network Security Default Setup USB Operation Driver Info g HDD Format WARNING There are two options to chose from Format HDD Formats the unit Hard Disk Drive Format USB Drive For
54. when video is connected to V 1 or VGA Note The MDVR factory settings are programmed to display administrative view on VGA monitor If the MDVR is connected on the Video output 1 press the VIDEO button on the IR to switch to composite monitor output Please see a list of factory default settings under System Default Settings explanation page System Login for Setup Functions The unit have password authorization enabled in order to enter setup The IR will not response to any commands until SETUP or LOGIN key is pressed for validating the user authority of the MDVR To enter a password Press the LOGIN LOCK or SETUP key on the handheld controller e When a menu appears on the display enter the Unit ID and stored password Default unit is 000 and password is 88888888 e Press ENTER on the handheld controller If the password is accepted the setup menu will appear Please enter Unit ID amp password Unit ID Password Enter Cancel Two levels of password are available in the setup e USER PASSWORD CORRECT indicates permission is limited to playback advertisement movie and music Default USER password is 22222222 e ADMIN PASSWORD CORRECT indicates full access to MDVR Default ADMIN password is 88888888 The unit has a built in SUPER Password in case the ADMINISTRATIVE password does not work It is a back door entry to the unit which cannot be changed The password is 19810512 IT IS HIGHLY RECOMMENDED TO STORE THIS PASSWO
55. y Start Weekday End Record File Size Idle Time Unit ID Video Type Audible Alarm Priority Record HDD O W Network IP Address Subnet Mask Gateway Security Driver Info Company Name Vehicle Number Driver Name Camera Camera 1 Camera 2 Camera 3 Camera 4 Camera Num Rate FPS Resolution Time Insert Output Mode Schedule Event Setup Sensor 1 Sensor 2 Sensor 3 Sensor 4 Sensor 5 Sensor 6 Sensor 7 Sensor 8 Sensor 9 N Default Setting Current date and time Monday Friday NTSC Disable YES 192 168 0 100 192 168 0 1 Y D m N gt lt Y gt B Label No Label Label No Label Label No Label Label No Label Audio z No Audio No Audio No Audio No C Adver Autoplay Every 00 00 23 59 Urtex SecurteX MDVR Manual i sec Digital k USB Operation There are two options available with the USB operation DEVICE MODE Using the ENTER Key on the handheld IR select the DEVICE MODE The DEVICE MODE allows a computer or a laptop to connect to the MDVR via supplied USB cable Once connected the drive appears as a regular hard drive in the computer Normal Window operations could be performed example Download the recorded data from the unit to the computer hard drive Upload the advertisement clips from the computer to the unit etc For a complete file description of the MDVR hard drive layout please look at the chapter labeled as Hard Disk File S
Download Pdf Manuals
Related Search