Technical Notes for
Contents
1. Figure 9 Red Border indicates motion triggered When motion is detected based upon the settings specified on this screen an alarm scenario may be triggered If you want you can designate different areas within the image for use with different alarm scenarios To Create a Motion Detection Region within an Image You can create one or more areas within a frame for motion detection analysis This is useful to avoid false positives for items that are known to be moving such as a tree swaying from the wind You configure motion parameters for each region individually If you create a specific motion detection area within the image you will not have the ability to use motion detection analysis on the full image Avoid overlapping regions 1 In the Motion detection screen under Server side functions click the lt icon to establish an Unnamed group 2 Click the amp icon and you Can begin to draw a polygon for the area to be analyzed Click on the image for the first corner of the polygon Move the mouse and click again for the first tangent Repeat this to draw a shape When you return to the original starting point double click the mouse to complete the shape Give the region a logical name which will allow you to identify it later when you use this in an alarm scenario f Repeat for each region 3 Select a region by clicking its name and set the Sensitivity Idle timer and Threshold for that region Repeat for each region o 292. 3 To establish a secure connection activate Use FTP via SSL if the server supports SFTP Contact the network administrator for the correct settings IMPORT OF PATCHES AT THE UPDATE AGENT 1 After successfully exporting patches see Global Repository on page 4 copy the directory to a USB drive and insert into the computer where the UpdateAgent is running 2 Start the application SeeTec UpdatePatch Import exe and click Yes The SeeTec UpdatePatchImport exe is created after you ve clicked Export on the Global Repository tab 3 Click OK and start the update patch process The UpdateAgent will be stopped for the update process After completion the UpdateAgent VMS_UPDATER will be restarted automatically MANUALLY CONFIGURE amp ACTIVATE UPDATE AGENT S The UpdateService Agent VMS_UPDATER is installed by default for all recorder components except the Master Core If the IP address of the UpdateService Servier VMS_UPDATESVR should change after installation you can configure the agent manually without having to reinstall the software 1 Open the configuration file in the installation directory on the agent pc This file should be located in conf and named updateclient conf xml 2 Replace the existing IP address with the new IP address of the Update Server server component VMS_UPDATESVR For example lt xml version 1 0 gt lt ServeriInformation xmlns xsi http www w3 org 2001 XMLSchema instance xmiln
3. 5 p Note when one region is selected other regions are not visible on the image On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 10 lt gt OnSSI Technical Notes for Ocularis 5 1 Activate motion detection Unnamed region 1 Sensitivity idle timer Lh am mes 15 15 Figure 10 Sample Motion Detection Area 4 Click Apply when done Verify that Record on Motion is Selected If you want to record video on motion make sure the Record on motion drop down on the left panel is set to Yes Configuration mode Baje ina Several Gigicad inga Cope oebtets Corres Aan FS 1h ane Lape ngs fcr Seca pe Lape bhnge Widen sar Ain Le irern JPE Wijen dma anpor 7 ba ide LASA BIA dbean Ratha ata a redja oaia vior Tempering deemon Unrate regon 1 7 anara de Torii Sera tety hile Bar MigBSs gabe TT au Teng L C e Figure 11 Record on Motion set to Yes Turn Off Standard Recording If you ve committed to recording on motion whether it is camera based or server based motion it makes no sense to continue with Standard Recording set to Always the default value This setting should be turned off 1 In the Ocularis Recorder Manager on the configuration page for the camera you wish to configure click Multimedia database or Image storage on the left panel 2 Set Standard recording to No Visits Hp Digital out
4. Client Ocularis Client Ocularis Administrator Ocularis Recorder Manager Update Service Agent VMS_UPDATER Figure 1 Sample system layout There are two components to the Update Service the Update Service SVR Server module and Update Service Agent Client module By default the server service will be installed on the Master Core unless unchecked using the Custom installation option You may also install this service on a separate server however there should be only one instance of the server module in an ENT or ULT system For PRO the Update Service SVR service should be installed on each Master Core Server it will be installed by default Components installed on remote satellite PCs will have an Update Service Agent installed by default This allows the Update Service SVR VMS_UPDATESVR to communicate and push any updates out to Agents VMS_UPDATER on the remote machines Therefore if you decide to use the default and include the Update Service SVR Server on the Master Core server use either the Manager amp Server installation option or Custom option during software installation or upgrade With the Custom installation option be sure that UpdateService is among the checkboxes selected On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 1 lt o OnsSsl Technical Notes for Ocularis 5 1 If you choose to install the Update Service SVR S
5. General Events that trigger the alarm Start End Persons involv ed Server Email and FTP Buttons that trigger the alarm Cancei Figure 14 Configure Motion to Trigger the Alarm On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 12 lt gt Onssl Technical Notes for Ocularis 5 1 5 When done click OK 6 Click End on the left panel to configure when to end the alarm In most cases it will be the Maximum server alarm duration a time value in seconds Note We recommend setting the Maximum server alarm duration to 2 seconds longer than the Idle timer in order to ensure that all video is captured If you take advantage of pre alarm buffer the Maximum server alarm duration and Idle timer values can be the same General am Led Restart echred Serer Emal pna FTF Hunisi ar berate fe Blir Figure 15 Set the Duration 7 Click Server on the left panel Enter the number of seconds for Pre alarm duration for camera recording s This alarm setting overrides the global pre alarm buffer setting for alarm recording in the camera s Image Storage section 8 Click the Edit button to set the Actions at start of alarm Expand the list and click Start alarm recording for the camera Click OK ei bestia Se o rh Pre siarm duration for camera recordings 5 Use separate frame rete fps for camera record
6. g manual distribution of patches e Green the Client s Update Agent is up to date 5 Click a client name to display the installed components the system software the software version the status and the installed patches Click Refresh to refresh the list to a more current status 7 Click Configure group to create rename or delete a group and specify the group s update settings See Configure A Group below 8 Click Delete clients to remove clients from the configuration tool Manually Triggering an Action If a group is configured to be updated manually a button Start patch update at the UpdateAgents button is displayed in the group s status pane Click the button Start patch update at the UpdateAgents to start the update It will require up to 60 seconds before the update process is started CONFIGURE A GROUP When you click Configure group a group configuration screen appears Group configuration dmg 10 SONS EEE Figure 3 Group Configuration We recommend taking advantage of organizing your system with groups Create a group based on location or network bandwidth etc and then select Clients UpdateAgents as members of that group You can for instance group all clients that have a low bandwidth connection in a specific group Or you can put all New York clients in a New York group and all New Jersey clients in a New Jersey group etc The advantage of groups is that you c
7. 92 168 10 85 409 169 49 Nnn Manufacturer Type Axis Axis Axis Axis Axis Axis Axis Axis Axis Axis Axis Axis Axis Axis Axis Axis Axis Axis Axis Axis Axis Axis Axis A seie M3114 M5014 Q1755 P5532 M3114 Q8414 LVS P3344 M3114 M3204 P7214 209MFD M1114 P3365 Q1922 M3203 M1031 W M1104 M1011 W P3301 M3113 P1311 P3225 LVE P1355 RA J NA Name AXIS M3114 AXIS M5014 AXIS Q1755 AXIS P5532 AXIS M3114 AXIS Q8414 LVS AXIS P3344 AXIS M3114 AXIS M3204 AXIS P7214 AXIS 209MFD AXIS M1114 AXIS P3365 AXIS Q1922 AXIS M3203 AXIS M1031 W AXIS M1104 AXIS M1011 W AXIS P3301 AXIS M3113 AXIS P1311 AXIS P3225 LVE AXIS P1355 AVIC AADINA Technical Notes for Ocularis 5 1 Serial number or MAC 00408C898475 00408C8A41613 00408CS44FBD O0408CAFSEF9 00408CA66587 ACCCSE020144 o0408cs998C4 00408C897F9C O00408CA66588 00408CC58487 00408CS7ECE3 00408CA69256 ACCCSEOCES33 O0408CCSFS40 O0408CAC2D7C 00408C945841 00408CA64896 00408CS44F77 00408C93D192 O0408CACZDAS O0408CS477A7 ACCCSE022746 00408CE23078 NAANOCACOOCA 124 devices found L Known devices Add with multiconfig Validate settings before device creation Figure 20 Device finder data validation checkbox Note The Validate settings before device creation checkbox setting will be retained for the next session For example if you uncheck this setting the next time you log in and add a device it will still be unchecked On
8. ERVER CONFIGURATION On the Server configuration tab the basic settings for the communication between the UpdateService SVR Server and UpdateAgent clients are managed By default the UpdateService connects to the server providing the updates an OnSSI server downloads and distributes the update patches to the UpdateAgents However if manual distribution or a different server for downloads is preferred the automatic setting can be modified Information Global repository Server configuration OnSSI website Otherwise you are able to ally y for patches from the O you are a import the patch files manually Depending on the settings the Restart SeeT ec UpdateServer Figure 5 Server configuration tab The options for downloading update patches include Download and install patches automatically from the internet recommended This is the recommended and default setting for automatic updates and distribution of patches Download patches from the internet but do not install them automatically Update patches will be automatically downloaded from the server but will not be distributed to the UpdateAgents The update patches must be installed manually See Global Repository on page 4 Download and install patches automatically from a defined remote location The update patches will be downloaded from an FTP server that must preconfigured See Configuring the FTP Server below and will be automatically installed Download patch
9. IN O OnSSI Technical Notes for Ocularis 5 1 The purpose of this document is to provide technical details for various new features in the Ocularis 5 1 release Topics in this Document Bjoa Fe elec 611 61 P A T E E E E E T E A E E E A EE A E E E E E 1 Server Side MOtion i DI2112103110 0 PPPE 8 Ocularis Recorder VA Administration TOO siescrenntsansatecasoncuessssechesntanabatnsamatededasuualyscsahannteadiaiincauetednimetuelnanseiesnsaadoateievevelesecannt 14 DERA 121 1 PEENE S IEA AE EA E I A EE A A EE AE EA E EAA E A E EEE 16 Local OQculans Clen VIEWS esris uinna Er E E E E EE T EEEE E E EE E ETA 18 Update Service Ocularis v5 1 includes a new service called Update Service The Update Service is a service that will automatically check online for software updates to recording system components and download the update if it is available Recorder updates are typically made available once per month By default the system will check for the update nightly at 3 00 a m and if found will download and install the update patch for the recorder components These settings may be modified IP Video Cameras Encoder IP Video Cameras Slave Core Ocularis Ocularis R d Recorder eae leona Ocularis Recorder Device Manager Core Master Core Device Manager Update Service Agent m UpdateService SVR lip dete Series Adeni VMS_UPDATER E VMS _UPDATESVR VMS_UPDATER Ocularis Base Ocularis
10. Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 17 IN O OnSSI Technical Notes for Ocularis 5 1 Local Ocularis Client Views With Ocularis 5 1 Operators can log directly into a Core and save views locally using Ocularis Client in Limited Mode Keep in mind however that this procedure bypasses Ocularis Base and therefore you will not benefit from any Base functionality such as alerts events maps video walls etc Additionally a separate user account must be created on the recorder s Core for the operator to use This user account may be configured to have privileges to all or only some cameras Refer to the Ocularis Recorder Configuration Manual for instructions on how to create a user 1 Log in to the Master Core using Ocularis Client To do this use the IP Address of the Core in the Server field 2 The first time you log in the screen will be blank To configure views click the Set up icon 13 37 15 Set up icon Figure 21 Set up icon 3 Click the to expand the Company folder 4 Click the create view icon H and select a layout Supported layouts are 1 x 1 2x2 3x3 4x4 On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 18 lt gt Onssl Technical Notes for Ocularis 5 1 Ciniirn DO rannta IOIA J Figure 22 Create a View Layout 5 Once the l
11. an control update parameters on a per group basis The group configuration displays e Specific Transfer time and date of the update patch file s to be downloaded If the time is in the past downloads and patches will start immediately e Transfer interval between Clients UpdateAgents in minutes This allows you to stagger the download of the software patch for each client e g in Figure 3 if the Transfer interval is 10 the first UpdateAgent starts the download for the patch at 4 00 AM the second UpdateAgent starts its download ten minutes later at 4 10 AM PM the third starts at 4 20 AM and so on e Patch time This is the date and time when the patch is applied installed 1 Specify the required settings for this group Transfer time transfer interval and patch time On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 3 lt gt Onssl Technical Notes for Ocularis 5 1 2 Select Do not distribute patches to these clients to prevent automatic distribution to the clients in this group if there is low bandwidth Keep in mind if this option is selected patches must be distributed manually 3 Select Don t start patching automatically to prevent automatic installation of patches Patching must be performed manually 4 Select Automatic restart before and after the patch to shut down the software and log out all users before applying the patc
12. ayout is selected the view name is displayed and editable Edit Views E m Company FA aNTHONY Darrell 2A FA New Layout x 2 New Layout 2 x 2 Figure 23 Name a View 6 Populate each view pane by dragging and dropping a camera from the list on the left to the pane position desired On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 19 IN O OnSSI Technical Notes for Ocularis 5 1 Figure 24 Drag amp Drop to populate a pane 7 Use the Filter field if you need to quickly locate a camera based on a keyword 8 Remember to click Save 9 Click Close to exit set up mode and return to live viewing y 4 CE STSPPM Fn E fr Figure 25 Filter Save amp Close On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 20 D OnSSI e Select the new view from the Views menu Technical Notes for Ocularis 5 1 e All views created in Limited Mode are stored on the Master Core server and are shared amongst all users e You will see these views on any workstation you use to log in with Ocularis Client Limited Mode e For more details on using Ocularis Client in Limited Mode refer to the Ocularis Client User Manual On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 21
13. date Service e Configure how to deploy recorder update patches e Check for updates online CONFIGURE THE UPDATE SERVICE 1 On the computer with the Update Service SVR server component which is by default the Master Core Server launch the Update Service tool from the Windows menu Start gt All Programs gt OnSSI gt Ocularis Recorder gt Ocularis Recorder UpdateServer configuration tool 2 If required confirm the system s administration privileges The Information tab is displayed Information Global repository Server configuration Group Default Download time As soon as available Patch time Number of UpdateAgents 0 Status Names Status text Figure 2 Information tab 3 On the left is a tree folder structure where you can create a hierarchy of logical groups The Default group contains all Update Agents not assigned to another group 4 Click a group folder to display the status overview of all Update Agents Clients in that group Colorful bullets indicate the status of each e Red an error occurred at the client or the Update Agent of the client is offline for more than 3 minutes On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 2 lt gt Onssl Technical Notes for Ocularis 5 1 e Yellow the Update Agent is currently busy patching downloading etc or waiting for an event triggered by the Update Service SVR e
14. erver on a server other than the Master Core be sure to use the Custom option and that UpdateService is among the checkboxes selected when installing the Update Service Once the Update Service SVR option is installed if you decide to use the Custom installation option to install other components the UpdateService should be unchecked since it is already installed on the Master Core computer The Update Service uses port 63000 and 63001 It is advised to keep these default values If you need to change these port numbers please contact OnSSI Technical Support prior to doing so For detailed installation instructions see the Ocularis Installation and Licensing Guide for 5 1 UPDATE SERVICE CONFIGURATION TOOL This tool manages the configuration of the Update Service on the Master Core Server or whereever the server service is installed as well as the Update Agents installed on the other recorder components The configuration tool is installed automatically with the Update Service server component This configuration tool can e Display all connected Update Agents Clients their hardware specifications installed features and applied patches of each Update Agent e Display status information of all Update Agents in a group e Be used to create groups of Update Agents to configure e Beused to rename and delete groups and obsolete Update Agents from the configuration e Import and export download packages and patch files for the Up
15. es from a defined remote location but do not install them automatically The update patches will be downloaded from an FTP server that must preconfigured See Configuring the FTP Server below but will not be distributed to the UpdateAgents The update patches must be installed manually See Global Repository on page 4 Do not search for patches on the internet or any remote location not recommended This option is not recommended as no update patches will be downloaded or distributed automatically The patches will have to be downloaded and exported manually See Global Repository on page 4 Configuring the FTP Server If you prefer to use an FTP Server to distribute update patches across the network use these steps for configuration On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 5 lt gt OnSSI Technical Notes for Ocularis 5 1 1 After selecting the option Download and install patches automatically from a defined remote location enter the IP address and port number of the FTP server es from the OnSSI website Otherwise you are able to e patch files manually Depending on the settings the FTP server Port User Password P lease configure the time when the UpdateService is to search for patches at the defined location Restart SeeT ec UpdateServer Figure 6 Configure FTP Server Settings 2 Provide a username and password for the server
16. ess video being recorded To Configure Standard Record on Motion Using Server Side Motion Detection 1 Configure Motion Detection Settings On The Full Frame a Select Motion Detection under Server side functions for the camera you wish to configure You may also select multiple cameras click the Edit icon and configure selected cameras as a group b Change the Activate motion detection field from No to Yes Check the box if configuring multiple cameras at once c Set the Sensitivity Idle timer and Threshold 2 Verify that Record on Motion is Selected 3 Turn Off Standard Recording With Standard motion detection recording the system will use the default Home stream for motion analysis choose a default Motion Detection module for you and use the full frame for motion analysis There is no pre alarm buffer or post alarm duration recorded for this method Advanced motion detection recording is recommended since it allows you to have more control over what is analyzed and the duration of the recording To Configure Advanced Record on Motion Using Server Side Motion Detection Recommended Configure the Motion Detection Analysis Stream Configure Motion Detection Settings On The Full Frame or create regions to be used for motion detection analysis Verify that Record on Motion is Selected Turn Off Standard Recording Create Alarm Scenarios for Configured Motion aS SS Configure the Motion Detection Analysis Stream 1 In
17. h Warning there will not be any notification beforehand 5 If required deselect Clients from the group s list Only the selected clients will be a part of the group and affected by the group settings Note Keep in mind that if a download on a single Client fails or is delayed subsequent patches for other Clients in the group will not download nor will any of the patches be applied for any Client in the group Default Group Since the Default group does not have the same configurable parameters as a group you can create its behavior is different For the UpdateClients in the Default group the software patch will not be installed until all Clients in the group have received the patch download Then the UpdateServer will send out a signal for all patches to be installed applied on the Clients at the same time Keep in mind that if a download on a single Client fails or is delayed none of the patches will be applied for other Clients in the Default group Therefore it is highly recommended to create specific groups for the Clients rather than keep Clients in the Default group Creating a Group Click Create new group enter a name for the new group and click OK The new group will be displayed in the Group list Renaming a Group Click Rename group change the name for the group and click OK All assigned UpdateAgents will remain in the group and adhere to the group s settings Deleting a Group Select a group in the Groups list and c
18. ings Actions at start of alarm Actons at end of alarm Figure 16 Start alarm recording 9 Click Save to save settings So now when there is motion on this camera or within the configured region on this camera video will be recorded based on the alarm recording settings This alarm scenario will appear in Ocularis Administrator and allow you to set alert notifications in Ocularis Client On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 13 lt gt Onssl Technical Notes for Ocularis 5 1 Ocularis Recorder VA Administration Tool The Ocularis Recorder VA Administration Tool is used to configure settings for the Core Server and install the Versatile Application extensions Extension parameters are then configured in the Ocularis Recorder Manager One of the components controlled by the VA Administration tool is Server based motion detection When you install the software two Server based motion detection modules are automatically installed Each module can support up to 30 cameras channels Once you exceed this amount we recommend adding additional Server based motion detection modules Server based motion detection modules are the components that perform the analysis of motion on each frame Therefore consider where these are installed If you observe a degradation of CPU performance or are running low on memory consider moving the server based m
19. l Support Click the Connection test button to check the connection between the module and the Core Server If the module does not connect check and configure the network and firewall settings Select the Module IP from the drop down list The Module Port number is automatically set If you need to change this port check with OnSSI Technical Support first Select Enforce 32bit if the devices are not 64 bit capable This setting only applies to devices that have not yet been released for 64 bit Do not check this box until contacting OnSSI Technical Support Click Save to save changes Restart all SeeTec services On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 15 lt o OnSSI Technical Notes for Ocularis 5 1 Data Validation When cameras are added to a recorder device manager the default behavior with Ocularis 5 1 is to validate specific settings on the device This aids in troubleshooting issues with installed cameras The software checks whether the following fields are valid on the device e the IP Address e the Port e the username and password e the correct class of driver This is not necessarily the exact driver but the software sends an API command to the camera and if the camera understands it then it assumes a match You can turn this data validation off as well You may want to do this if you wish to remotely configure the syste
20. lick Delete group All clients in the group will be moved into the Default group and will be exempt from the update settings UpdateAgents in the Default group will get patches as soon as they are available The Default group cannot be deleted GLOBAL REPOSITORY The second tab of the Update Service Configuration Tool displays the available recorder update patches If the UpdateService has been configured for manual distribution in the Server configuration tab all updates can be imported from the server and exported to a directory on the server or an attached media Information Global repository Server configuration m Patch for 32 bit and 64 bit systems Following patches imported 6 7 1_VersatileApplications_x86_05 On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 4 lt gt Onssl Technical Notes for Ocularis 5 1 Figure 4 Global Repository tab Click Import patches to download the available patches from the server which are displayed Click Refresh to check at the server for update patches not yet displayed Click Export to copy the updates to a directory that can be copied to any media such as a USB drive The updates have to then be installed at each client separately If certain patches are not required select the patch es from the list and click Delete patches before exporting them Only the patches listed will be distributed S
21. m from the convenience of your own office without actually having connected cameras or devices Then you can take the system onsite and install saving you a great deal of time in the field The following camera manufacturers are supported for data validation ACTi Pelco Arecont Vision Samsung Axis Sony Bosch Vivotek lQinVision Onvif Panasonic The data validation check occurs when you add a single camera Create camera Name Axis 01755 Manufacturer Q1755 08721 E PTz O8722 E PTZ v Use authorization User name root Password Host IP address or name 192 168 11 53 DeviceManager DeviceMlanager on Master Wizard Cancel Validate settings before device creation Figure 19 Data Validation Check Box Note The Validate settings before device creation checkbox will appear for all manufacturers even those devices which do not support this feature If you use the Device Finder tool you will also have data validation as an option On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 16 Address 192 168 10 242 192 168 11 51 192 168 10 48 192 168 11 102 192 168 11 39 192 168 11 58 192 168 11 73 192 168 11 76 192 168 10 43 192 168 11 71 192 168 10 1 192 168 10 239 192 168 11 99 192 168 10 183 192 168 10 218 192 168 11 10 192 168 10 237 192 168 10 47 192 168 10 16 192 168 10 190 192 168 11 14 192 168 10 80 1
22. otion detection module to another computer Another methodology is to configure a single server with adequate hardware and use this solely for server based motion detection modules To Add a New Motion Detection Module 1 From the Windows Start menu gt All Programs gt OnSSI gt Ocularis Recorder gt Ocularis Recorder VA Administration Tool 2 Right click VAConfig and select Add new module gt Server based motion detection License plate recognition ObjectVideo Transcoding engine Gateway service Analytics interface Generic DVR R Generic Access Control Figure 17 VA Administration Tool A new module appears On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 14 lt gt Onssl Technical Notes for Ocularis 5 1 10 11 VAConfig p Configurai a eee alyticsPipeline Module name ae Core server IP G Motion Detection Module 0 O i j PEEN X 192 168 4 130 L E Generic DVR Module 3 ONS AnahticsPipe CE a Motion Detection Module Figure 18 VA Server based Motion Detection Module Modify the name of the module in Module name to make it easily identifiable Enter the IP address of the Master Core in the Core server IP field Note Do not use localhost or 127 0 0 1 The Service ID field changes on the first connection to the OnSSI server Do not reset the Service ID without first contacting OnSSI Technica
23. puts Camera Axis P8514 s PE Recording period Always x General Image storage Time limit Days Hours Minutes Multimedia database 7 0 o Edge Storage v Vki TG Recording if f Stream 1 6 Select Stream 2 6 Figure 12 Turn off Standard Recording On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 11 lt gt Onssl Technical Notes for Ocularis 5 1 3 Click Apply Now you can create an alarm scenario using server side motion detection Create Alarm Scenarios for Configured Motion It is recommended to use alarm scenarios when recording on motion in order to have better control over the video being recorded Use the steps below to create the alarm scenario It is assumed that motion detection settings have already been configured 1 In Ocularis Recorder Manager create a new alarm by either selecting Alarms in the Control Bar and then Create new Object or click Create alarm in the main configuration screen Create camera Find devices Figure 13 Create New Alarm Scenario 2 Enter a descriptive name for the alarm and click OK 3 Click Start on the left panel and then click the Edit button to select the event that will trigger the alarm 4 Expand the camera configured for motion and check the box for Motion Detection for the configured region or full frame You can select more than one motion detection event
24. s xsd http www w3 org 2001 XMLSchema gt lt ip gt 192 168 11 155 lt ip gt lt port gt 63000 lt port gt lt ServerInformation gt Replace 192 168 11 155 with the new IP address 3 Save the changes On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 6 IN O OnSSI Technical Notes for Ocularis 5 1 4 Restart the agent update service VMS_UPDATER On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 7 IN O OnSSI Technical Notes for Ocularis 5 1 Server side Motion Detection Ocularis v5 1 includes server side motion detection This feature is useful for cameras that do not support camera side motion detection or for those users who prefer server side motion detection When motion is detected in the frame or configured area within a frame it can be recorded and or trigger an alarm scenario The analysis process comparing frames for motion is done at the server level and uses CPU processing and additional memory RECORD ON MOTION STANDARD VS ADVANCED SERVER SIDE MOTION DETECTION Standard motion detection recording is easy to set up but has limitations Once motion is detected it will record video for 30 seconds regardless of the idle timer settings If motion is detected again once the idle time is reached video will record for another 30 seconds This can result in exc
25. the Ocularis Recorder Manager open the configuration page for the camera you wish to configure 2 Click Server side functions on the left panel Configuration mode amp m Camera configuration Axis P8514 Server side functions v Encoder camera Video analysis module Motion Detection Module 1 General Digital inputs Video classification None v Digital outputs HD quality Camera Axis P8514 Standard quality Mobile Web Analytics General Image storage Multimedia database Edge Storage Y Video streams Figure 7 Server side functions On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 8 lt o OnsSsSsl Technical Notes for Ocularis 5 1 3 a A default Video analysis module will be selected Motion Detection Modules perform the actual analysis of frames to determine motion It is recommended not to exceed 30 devices assigned per module Two modules are installed by default You may select an alternate module from the drop down list If you need to add additional modules see To Add a New Motion Detection Module The Video classification will default to None To reduce CPU and memory utilization we recommend adding a low resolution MJPEG video stream and assigning it to a video classification Then select the video classification here that you want to be used in the server based analysis for motion detection Note Add a ne
26. w stream by clicking Video Streams and then New Select the Stream change to Motion JPEG set the resolution assign a video classification and click Apply Note the label for video classifications may be modified in System gt Video classifications Click Apply Configure Motion Detection Settings On The Full Frame 1 a 6 In Ocularis Recorder Manager open the configuration page for the camera you wish to configure Click Motion detection under Server side functions on the left panel Figure 8 Motion Detection Settings Change the Activate motion detection drop down from No to Yes Adjust the Sensitivity slider and Threshold for the desired settings Sensitivity refers to the amount of pixel change required in order to sense motion and threshold is how much motion you want to occur before the system recognizes it as motion If desired adjust the Idle timer setting This is the time in seconds that the system will wait before resuming motion detection Remember to click Apply to save settings Once the settings are applied if you see the image frame outlined and blinking in red it means that the system recognizes motion as having triggered On Net Surveillance Systems Inc One Blue Hill Plaza PO Box 1555 Pearl River NY 10965 T 845 732 7900 www onssi com page 9 lt gt OnSSI Technical Notes for Ocularis 5 1 Unnamed region 1 Sensitivity idle timer Loo amm me ET 15 Threshold Ea Y
Download Pdf Manuals
Related Search