HOBOT-168 Glass Cleaning Robot User`s Manual
Contents
1. HOBOT 168 Glass Cleaning Robot User s Manual Copyright Copyright 2012 by HOBOT Technology Inc All rights reserved No part of this publication may be reproduced transmitted transcribed stored in a retrieval system or translated into any language or computer language in any form or by any means electronic mechanical magnetic optical chemical manual or otherwise without the prior written permission of this company Trademarks All other logos products or company names mentioned in this manual may be the registered trademarks or copyrights of their respective companies and are used for informational purposes only Technical support any problems occur and manual cannot provide the solution you need Please contact the local retailers or the local authorized dealers Disclaimer HOBOT Technology Inc makes no representations or warranties either expressed or implied with respect to the contents hereof and specifically disclaims any warranties merchantability or fitness for any particular purpose Further HOBOT Technology Inc reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify and person of such revision or changes The place and safety of this glass cleaning tool usage must be judged and responsible by user But also need to follow the instructions in this user manual 1 HOBOT Technology Inc2. Important Safety Precautions Read all instructions before operating the device WARNING 14 15 Fasten the safety rope and tie to indoor fixture before operating the device Check if the safety rope is broken or the knot is loose before operating the device Set danger warning area downstairs for no balcony window and door Battery shall be full charged green lamp ON before using Do not use it in rainy or moist day Turn power on before put device onto glass Make sure appliance can stick and stand on glass surface while put onto glass Before turn power off please hold device Do not use it on frameless glass Make sure put cleaning ring onto cleaning wheel correctly for no leakage Do not spray or pour water onto the appliance Prohibit children from using this device Remove anything the glass Do not use on cracked glass Reflective or coating glass might be slightly scratched due to dirt on the glass while operating Keep hair loose clothing fingers and all parts of body away from the openings and moving parts Do not use in areas with existed flammable or combustible liquids gas 2 HOBOT Technology Inc Product introduction HOBOT 168 is a glass cleaning robot with a vacuum motor inside that can suck air and stand on the glass surface An embedded UPS Un interrupted Power system can prevent the robot falling from the window even when no electrical power HOBOT has two special desig
3. Upper hooking hole Buzzer Remote receiving window Blue lamp Normal Red lamp Abnormal Orange lamp charging Green lamp full charged Vent Al Technology Power switch DC power jack _ 2 1 Safety Lower hooking hole HOBOT 168 shall always connect power cable for normal using How to put device onto glass to start using 1 Turn on power switch and then make sure the fan is running 2 Put device onto glass and keep 10cm away from the window frame 3 Check if device can stick to the glass before releasing How to take device down from glass 1 While device is running please hold safety rope with one hand and take device 5 HOBOT Technology Inc down from glass with the other hand 2 Turn off power switch in safe area Safety rope and buckle 1 Before using check if the safety rope is broken or the knot is loose 2 Fasten the safety rope and tie to indoor fixture before operating UPS Un interrupted Power System function 1 The UPS function will be enabled automatically when no electric power supplied The backup time of this UPS is 30 minutes 2 1 no electric power is supplied the device will stop automatically alert and flash red lamp User shall take device down from the glass as soon as possible 3 User can pull device back by pulling safety rope Slightly pull the safety rope at an angle close to the glass to prevent dropping Please make sure th
4. film on the glass 2 Cleaning cloth might be too wet 3 If clean window many times the glass surface will become very slippery 4 The glass surface will become slippery if clean several times in low humidity environment such as in air conditioned room 5 When startup press D or or 42 keep 10cm away from the window frame Q5 HOBOT does not move smoothly or move irregularly Ans 1 Cleaning cloth is too dirty Please change a clean cleaning cloth 2 Glass surface has different friction factor areas due to stickers window film and so on Please use in single area 3 The screw of cleaning wheel might be get loose just tighten it 06 After cleaning remained circle mark on the glass surface Ans Cleaning cloth is too dirty Please change a clean cleaning cloth and clean 10 HOBOT Technology Inc again Q7 What to do if HOBOT stopped at higher area while no electric power supplied HOBOT alarm and red lamp is flashing Ans 1 User can pull HOBOT back with safety rope Slightly pull the safety rope at an angle close to the glass to prevent dropping 2 Switch the power switch to off 3 Check out whether electric poor contact cable broken or not Q8 What to do if HOBOT abnormally stopped and red lamp is flashing without alarm Ans 1 User can move HOBOT to safe area by remote control or pull HOBOT back with safety rope Slightly pull the safety rope at an angle close to the glass to preve
5. or replacement Non warranty Normal wear and tear e g cleaning cloth safety rope etc Reduction in battery discharge time due to battery age or use Damage caused by assembling or installing that not in accordance with the instructions of HOBOT Damage caused by using the HOBOT glass cleaning robot for any other purposes than normal domestic household Damage caused by using parts and accessories which not specified by HOBOT Damage caused by accident abuse or misuse 13 HOBOT Technology Inc
6. e battery was full charged green lamp ON before using 1 First turn off the power switch on the device Plug in the power Orange lamp ON means charging 2 Green lamp ON means the battery was full charged Table cleaning mode Put device on the table and select auto cleaning mode the device will run in table cleaning mode Notice 1 Do not use it on frameless glass 2 sure put cleaning ring onto cleaning wheel correctly for no leakage 3 Do not use it in rainy or moist day 4 Set danger warning area downstairs for no balcony window and door 6 HOBOT Technology Inc LED indication LED indication 1 Battery charging Orange LED is ON 2 Battery full Green LED is ON 3 No electrical power Red LED flashing Repeat beep sound 4 Hardware error Red LED flashing Blue LED flashing with error number times Beep Beep Beep HOBOT Technology Inc How to clean the glass Step l Use clean and dry cleaning cloth to clean dust and sand on the glass step Change again the cleaning cloth Keep upper wheel s cleaning cloth as clean and dry Spray a little detergent 1 2 spray on lower wheel s cleaning cloth but not make cloth wet if too wet machine can t move well Then clean the glass again Remote controller The device can be remote controlled from the front and backside Up then Down hm Up No Use Stop oo Auto Up then Down Auto Left then Down A
7. n cleaning wheels that can freely traverse on the window surface and even on the wall The easy replaceable lint free cloth is used on both of the cleaning wheels Micro fiber based cloth is used for good glass cleaning HOBOT has Al Technology that can calculate path auto detect fringe of window auto clean entire window Also has manual mode for user operation Specification 295 148 120 LWH Product weight 9300 Gift box size 370 165 145 LWH Gift box total weight 2 05Kg Input Voltage 100 240VAC 50 2 60 2 24 3 75 Power consumption SOW Battery life time 2 years Cleaning speed 4min square meter Clean twice everywhere Maximum cleaning area Height 6 meters Wide 5 meters 3 HOBOT Technology Inc Product and accessories Device x 1 Remote controller x 1 Adapter 100 240VAC 50 60HZ x 1 AC power cord x 1 DC power extension cable 4 meter x 1 Cleaning cloth x 12 Cleaning ring x 4 User manual x 1 Product features For any kind thickness glass Al Technology Cleaning speed 4 minutes meter 2 3 kinds of automatic operation modes for cleaning entire window Auto finish Embedded UPS Un interrupted Power System Anti dropping control algorithm Auto detect edges of window Micro fiber cloth High strength safety 150Kof Remote control Table cleaning mode Power consumption 80W Input voltage 100 240VAC 50 60Hz HOBOT Technology Inc Getting to know the device
8. nt dropping 2 Switch the power switch to off 3 Check whether there 15 air leakage caused by gap uneven window frame 09 When turn on power switch the FAN do not rotating and no alarm LED signal Situation Blue flash means battery voltage too low please waiting for Orange on battery full charged Green lamp on If machine still Red off can t be use after charge 8 hours the battery shall be No alarm change Blue flash Machine hardware failure Red flash Please contact the local retailers or local authorized No alarm dealers for repair 310 If HOBOT can t auto stop at bottom of window when finished cleaning Ans Press key to stop machine 11 HOBOT Technology Inc Safety information about power adapter battery Use only the power adapter supplied with this device Use of other type of power adapter will result in malfunction and or danger Please use the proper electric outlet and make sure no heavy objects are placed on the power adapter or power cord Allow adequate ventilation around the adapter when using it to operate the device Do not cover the power adapter with objects that will reduce cooling Do not use the adapter a high moisture environment Never handle the adapter with wet hands Connect the adapter to a proper power source The voltage requirements found on the adapter Do not use broken adapter power cord or plug Do not attempt to ser
9. uto Right then Down Please remove the insulation spacer in the bottom of back of remote controller before using If you have to replace the battery just pull down the battery cover 8 HOBOT Technology Inc Power adapter DC plug S L shape connector Hy N Plug into DC power jack DC extension cable Using the cleaning ring and the cleaning cloth 1 Cover cleaning ring with cleaning cloth 9 HOBOT Technology Inc Frequently asked questions FAQ 31 If HOBOT can t startup and alert at the beginning of self test Ans It means that the friction factor is not properly used Pease check 1 Whether the cleaning cloth is too dirty 2 Glass stickers window film on the glass will also affect the friction factor 3 If clean window many times the glass surface will become very slippery 4 The glass surface will become slippery if clean several times in low humidity environment such as in air conditioned room 5 When startup press D or or 42 keep 10cm away from the window frame N N Q2 HOBOT slips and cannot detect the upper frame of window in Auto Up then Ans Press key and switch to or auto mode Q3 HOBOT cannot finish whole window and stop at middle area Ans Press or 45 auto mode to continue cleaning 34 HOBOT slips and cannot get higher to the window frame Ans 1 Friction factor is too low that might be caused by glass stickers window
10. vice the adapter There are no service parts inside Replace the whole unit if it is damaged or exposed to high moisture Consult your HOBOT dealer for help and maintenance battery used in this device may present a risk of fire or chemical burn if mistreated Do not disassemble short contacts heat above 60 140 incinerate you have to dispose of this old equipment please take it to the local recycling center for recycling electrical and electronic parts General safety information Retain the safety and operating instructions for future reference Follow all operating and use instructions Do not expose your device to rain or excess humidity and keep it away from liquids Such as beverages faucets and so on Avoid exposing your device to direct sunlight or intense light source and keep it away from heat source such as radiators space heaters stoves and so Do not place the device in the vicinity of strong magnetic fields Keep the device and accessories away from children Product operating temperature 0 C 40 C 82 F 104 F Product storage temperature 10 C 50 C 14 F 122 12 HOBOT Technology Inc Limited warranty there are defects in your HOBOT glass cleaning robot due to faulty materials workmanship or function within warranty period from the date of purchase or delivery please contact the local retailers or local authorized dealers for repair
Download Pdf Manuals
Related Search