USER MANUAL - Birdland Music
Contents
1. mOTN LEDGIGPACK LIGHTING LED LIGHTING SYSTEM USER MANUAL INTRODUCTION Thank you for having chosen a LED GIGIPACK If you follow the instructions given in this manual we are sure that you will enjoy this device for a long period of time SAFETY INSTRUCTIONS CAUTION Be careful with your operations With a dangerous voltage you can suffer a dangerous electric shock when touching the wires OPERATION After you connected the spot to the mains the LED GIGIPACK starts running OPERATION VIA FOOT SWITCH Connect the foot switch with the LED GIGIPACK device via the 5 pin connection cable with plug Pedal functions are as follows Pedal 1 Preset 1 x press all Spots 2 x press Spot 1 red 3 x press Spot 2 green 4 x press Spot 3 blue 5 x press Spot 4 amber 6 x press Spot 1 red and Spot 2 green 7 x press Spot 1 red and Spot 3 blue 8 x press Spot 2 green and Spot 3 blue 9 x press Spot 1 red and Spot 4 amber 10 x press Spot 2 green and Spot 4 amber 11 x press Spot 3 blue and Spot 4 amber 12 x press Internal programs Pedal 2 Sound controlled Pedal 3 Freeze Pedal 4 Black Out Speed control of the internal programs For increasing speed Press and hold Pedal 2 Sound controlled Briefly press Pedal 3 Freeze The more often you press Pedal 3 the quicker the speed of the internal programs For decreasing speed Press and hold Pedal 2 Sound controlled Briefly pres2. of same type and rating Before replacing the fuse unplug mains lead Procedure Step 1 Open the fuseholder on the rear panel with a fitting screwdriver Step 2 Remove the old fuse from the fuseholder Step 3 Install the new fuse in the fuseholder Step 4 Replace the fuseholder in the housing Should you need any spare parts please use genuine parts If the power supply cable of this device becomes damaged it has to be replaced by a special power supply cable available at your dealer Should you have further questions please contact your dealer TECHNICAL SPECIFICATIONS Power supply 110 240 V AC 50 60 Hz Power consumption 60 W Number of 10mm LEDs 432 108 red 108 green 108 blue 108 amber Beam angle 25 Sound control via built in microphone Maximum ambient temperature Ta 45 C Maximum housing temperature Ts steady state 60 C Min distance from flammable surfaces 0 50 m Min distance to lighted object 0 10 m Fuse F 2 A 250V Dimensions LxWxH 1200 x 55 x 310 mm Weight 13 kg Please note Every information is subject to change without prior notice 05 11 2009
3. s Pedal 1 Preset The more often you press Pedal 1 the slower the speed of the internal programs CLEANING AND MAINTENANCE The operator has to make sure that safety relating and machine technical installations are inspected by an expert after every four years in the course of an acceptance test The operator has to make sure that safety relating and machine technical installations are inspected by a skilled person once a year The following points have to be considered during the inspection 1 All screws used for installing the devices or parts of the device have to be tightly connected and must not be corroded 2 There must not be any deformations on housings fixations and installation spots ceiling suspension trussing 3 The electric power supply cables must not show any damages material fatigue e g porous cables or sediments Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed Disconnect from mains before starting maintenance operation DANGER TO LIFE We recommend a frequent cleaning of the device Please use a soft lint free and moistened cloth Never use alcohol or solvents There are no serviceable parts inside the device except for the fuse Maintenance and service operations are only to be carried out by authorized dealers Replacing the fuse If the fine wire fuse of the device fuses only replace the fuse by a fuse
Download Pdf Manuals
Related Search