Home
Enforcer 32-WE (Export) - User Guide - RINS1503-2
Contents
1. This will only be possible if Arm Area Choice is selected as Yes in the function Learn User Codes Tags Keyfobs If selected as No then all areas allocated to the user code will arm The keyfob buttons can be programmed in the function Learn User Codes Tags Keyfobs www pyronix com E Disarming the Enforcer Enforcer 32WE Arm Area A Enter Your Code Disarm Areas Enforcer 32WE C01 ABCD Time 02 53 C Deselect the Area s to be disarmed o Enter your code and deselect 8 Enter your code and deselect e Press the arming button any area s that are not to be any area s that are not to be on the keyfob disarmed disarmed maf co ca Tas O Y
2. Ut y x u L tal Disarmed Locked Armed NOTE If the Enforcer has failed to set a fault will be displayed on the internal tag Disarmed Locked Armed l I reader or a fail to set sound will activate on the external tag reader buzzer External Tag Reader Instructions Arming Present a valid tag to the reader the GREEN LED will illuminate on the external reader remove the tag the door will unlock then present the same tag within 10 seconds and the system will arm and the door will lock Disarming Present a valid tag to the reader and then remove it the status will be shown the alarm symbol will illuminate indicating the system is armed on the internal reader and the RED LED on the external reader present the same tag wihthin 10 seconds again and the system will be disarmed and the door will unlock Access Control Entry Control The readers can be used also for opening doors only without the ability to arm and disarm Please contact your installer for more information on this feature WPyronix www pyronix com H SMS Commands GSM V9 2 or above only If you have purchased the GSM version of Enforcer it will allow you to send SMS commands via a mobile phone to be able to arm disarm the panel remotely and others See below the different SMS commands available NOTE Any text message command to the Enforcer will need to start with a valid user code NOTE Text messa
3. 9 La J KI gt x e ITK lt IN x Sl SR S U M I This will only be possible if Arm Area Choice is selected as Yes in the function Learn User Codes Tags Keyfobs If selected as No then all areas allocated to the user code will disarm The keyfob buttons can be programmed in the function Learn User Codes Tags Keyfobs www pyronix com F Arming disarming with the tag reader If you have a tag reader installed then it will be possible to arm and disarm the alarm system usinga tag Disarmed Armed NOTE If the Enforcer has failed to set a fault will be displayed on the internal tag reader or a fail to set sound will activate on the external tag reader buzzer A tag reader can also be used to unlock entry doors A 5 Z i Z 5
4. Buttons UNLOCK II WPyronix www pyronix com 5 Master Manager Menu Review Logs Event memory logs Panel Log 01 01 A Repeat for all l i Start of Log Alarm Silenced Events 7 gi mua o te ee pros lt Nie obtain more information on the event Press e 9 w e m e m m em e o s Access Ctrl Log User open Door Events E x E ooo 1 eeeeeee M 9 lt Q m e um mm TA eee Le A T0 obtain more information on the event Press SMS PHONEBOOK W Pyronix i www pyronix com 6 Master Manager Menu SMS Phonebook SMS Number User Mobile 01 Do not use SMS Number 00 25 NOTE Number 1 is normally reserved for ARC communications Numbers 2 25 is normally reserved for SMS messaging Before you change this function please consult your installer 7 Master Manager Menu Walk Test WALK TEST Walk Test Areas Walk Test Inputs ABCD Input 01 Walk Test Input 91 I I I I i LB BELL TEST _ gq PC CONNECT MENU www pyronix com 9 Master Manager Menu PC Connect Menu Select P dial Allow Engr Menu W Pyronix C to 1 4 Select PC to Dial 1 PC Modem 1 2 PC Modem 2 3 PC Modem 3 4 PC Modem 4 1 Calling Remote PC sn Select Operation 0 Connect to PC 2 RM Service 8 Data from PC
5. Engineer Contacts and Table 25 P Input Tables 26 Q User Tables 28 R Outputs 29 S Product Information 30 T Notes To quick start the system only these features are needed to be programmed 31 www pyronix com A Introduction Two Way Wireless High Security The Enforcer 32 WE is a wireless alarm system that has been designed with your security in mind with quick and easy installation and minimal maintenance the Enforcer 32 WE protects your home with a multitude of unique features Taking full advantage of Pyronix s innovative two way wireless technology the wireless devices on the Enforcer 32 WE system are constantly communicating with each other using the Pyronix High Security Wireless Encryption Protocol The Enforcer 32 WE two way wireless devices are fully operational when the system is armed making your system more secure compared to other wireless systems where devices are disabled for up to five minutes after every activation to save battery therefore compromising your security The Enforcer 32 WE has been engineered by Pyronix as a secure reliable and easy to use wireless alarm system It includes the following features Battery Monitoring Savin The Enforcer 32 WE system uses advanced technology to preserve the battery life of each wireless device However the Enforcer 32 WE informs you when a battery needs replacing a month in advance before the device stops working This key feature gives you enough time to change th
6. ISNOH XIUOJAd sbulpjoH 34ndas II SSE D EJUSLUUOJIAU z 9peJD JLINDIS 800C IV GO0C E G TETOSN 800 9 TETOSNA 600 TETOSNA 6002 TW 9002 T TETOSNA
7. I BUTTON Programmed for User Output For example when pressed a gate can be opened When pressed again a gate can be closed II BUTTON Programmed for Status LED For example when pressed the system status is shown RED Armed GREEN Disarmed AMBER Fault Quick Arming If one of the buttons is programmed as Arm Area the alarm system can be armed by the keyfob The keypad will then start to count down the exit time depending what the exit mode is programmed by the engineer Once the alarm panel is in this arming stage it is possible to quick arm the system by pressing the same button again this will reduce the time of arming and therefore making the system arm immediately The disarm LED on the keypad will turn off and a beep will be heard once the system has been armed and the RED LED on the keyfob will be illuminated for a short time W Pyronix 5 www pyronix com D Arming the Enforcer Enforcer 32WE User Enter Your Code Arm Areas Please Wait Time 02 53 C Code 774 ABCD Arming Wireless Deselect the Area s User not needed to be armed Code Stop Arming Stop Arming ABCD o Enter your code and deselect any e Present your tag and deselect any Press the arming button area s that are not to be armed area s that are not to be armed on the keyfob
8. sprinklers etc via your keypad or remotely via your Keyfob extending the use of your security system SMS Text Notifications and Remote Control The system will notify you via SMS text messages in real time For example notification that your child has returned home from school safely or notification of a leakage of water in your property etc W Pyronix 3 www pyronix com B Keypads Readers There are three different devices that may be used in the process of arming disarming the alarm system these are the keypad tag reader and keyfob f Button Operations DM LA Exit user menu Select area A Moves backwards to the previous main menu item Selects area B E Mp EN ATI 5 Displays additional information in the log Scrolls to previous option in a sub menu Selects J xj led Bia area C a ur mr may R LD Moves forward in the log Selects area D 21 7 D Used for Fire and PA alarms 4 gt Directional buttons used for choosing options and moving through
9. 5 Diagnostics 6 Commissioning 11 Master Manager Menu Block Remote Arm This function will block any attempt made to arm and disarm the UDL software if enabled Block Remote Arm 0 No 1 Yes This function will block any attempt made to dial into the control panel to upload and download information if enabled EXIT MANAGER MODE www pyronix com 13 Master Manager Menu Exit Master Menu y EXIT MANAGER Enforcer 32WE BYPASS INPUTS p Enforcer 32WE MODE Time 0 25 C Time 0 25 C OR Press the A key to exit Manager mode from any main menu item 2 displayed in capital letters TB BYPASS INPUTS www pyronix com O Engineer Contacts and Table Installed to Grade 2 Yes No Environmental Class II Other Comments www pyronix com Input Tables p Description 25 www pyronix com Input Areas Wireless Inputs 17 W Pyronix P Input Tables Input Areas Description 33 RIX2 34 RIX2 35 RIX Address 0 36 RIX Address 0 37 RIX Address 0 38 RIX Address 0 39 RIX Address 0 40 RIX Address 0 41 RIX Address 0 42 RIX Address 0 43 RIX Address 1 44 RIX Address 1 45 RIX Address 1 46 RIX Address 1 47 RIX Address 1 48 RIX Address 1 49 RIX Address 1 50 RIX Address 1 51 RIX Address 2 52 RIX Address 2 53 RIX Address 2 54 RIX Address2 lO 55 RIX Address 2 56 RIX Address Y OO 57 RIX Address 2 O 58 RIX Addres
10. BCD A eee eee EA NG Sil 4 User Type 0 User 1 Manager User Arm Options Area Arm Choice E x E YA A gt IA u ur NENA PLZ EE A lt User Arm Options Area Arm Choice 0 Disarm Arm 0 No 1 Disarm Only 1 Yes 2 Arm Only 3 None eee eee a a pa e lt lt lt m ee Change Master Master Manager User In Area User Arm Options Area Arm Choice gt Av PB Tv IB LY PB Av Manager Code Code PRA A ABCD Disarm Arm 0 No 0 gt A lt User Arm Options Area Arm Choice 0 Disarm Arm 0 No 1 Disarm Only 1 Yes 2 Arm Only 3 None M SS AA es AA EZ ZZ EEEE ee am _ REVIEW LOG Arm Area Choice If selected as Yes the user will be able to choose the area they wish to arm after they have entered a user code or presented a valid tag If selected as No the control panel will automatically arm all areas the keypad code is assigned to www pyronix com 4 2 Change Codes configure proximity tags Press C Key to DELETE tag User Codes Tags Empty 01 gt Enter User Code i HP User In Area Learn Keyfobs YY E O Tl RUE ABCD A User Type 0 User 1 Manager Presen
11. O Response as the panel is already connection to the programmed PC1 number connected to the PC1 Pp www pyronix com I Pyronix SMS Control Mobile Phone Application There is a mobile phone application Android only that is available to download via our website and will control certain aspects of your control panel from your mobile phone Pyronix SMS Control Commands Screenshots Arm All Arm Area A Arm Area B Arm Area C WPyronix www pyronix com SMS Remote Control Disarm All Disarm Area A Output Status Disarm Area B Bypass Zones Disarm Area C Turn Lights On 1 Download the Pyronix SMS control application from http www pyronix com pyronix downloads php 2 Install the application on your mobile phone making sure download from unknown sources is enabled in your security settings 3 Open the application it will then be installed on your phone automatically 4 The icon to the left will be displayed on your phone menu Press the icon 5 Once the start up screen has loaded you will see three icons Arm Area A Disarm Area A and Panel Status These are the default operations 6 Press Settings and enter all your panel information such as panel name your engineer will know what this is panel input names if you wish to enter your zone names on here You can also choose the application language and a password for security NOTE It is recommended that a password is ent
12. as this will drain the battery K Personal Attack From Keypad If an PA alarm is needed press and hold both the and keys or hold for 3 seconds and a PA alarm will be generated Note The PA facility needs to be enabled by your engineer either silent or full alarm Please note that the key fob can also be programmed to support a PA alarm Please discuss this with your engineer L Fire Alarm From Keypad If a fire alarm is needed press and hold for 3 seconds and a fire alarm will be generated Note The Fire alarm key need to be enabled by your engineer W Pyronix www pyronix com M Master Manager Menu Options Bypa
13. e battery in the specific device Other wireless alarm systems may not give you a low battery warning signal meaning that devices could stop working leaving your environment unprotected High Security Encryption 128 bit high security wireless encryption protocol and intelligent wireless jamming detection User Friendly Keyfobs The fully two way wireless keyfob allows you to see the status of the control unit via 3 colour LEDs System armed When the system is armed a RED LED will illuminate momentarily System disarmed When the system is disarmed a GREEN LED will illuminate momentarily System fault When the system is in fault condition an AMBER LED will illuminate momentarily This will also flash when the keyfob is unable to arm the system It is possible to allocate different functions to each keyfob such as arming disarming different areas activating outputs to control external devices such as gates requesting system status and activating panic alarms Up to 32 wireless keyfobs can be added to the Enforcer 32 WE system Each wireless keyfob has its own user ID which can be reported to the ARC and user mobile phone which are stored into the event log of the control panel individually The keyfob also allows you to arm disarm every area individually giving you total control of your system User Automation Outputs The Enforcer 32 WE includes user automation outputs that give you the option to operate up to 20 devices such as gates lights
14. ered so only you will have access to arming disarming your control panel etc 7 Press Command to choose different operations to the PCX control panel that you wish to operate Press Add Command at default Arm will be selected press the drop down box to view all other operations that are possible Arming disarming arm with bypass bypass zones control user output output status and system status You may also choose your own icon style as well so the different commands can be easily identified Once all changes have been made press SAVE and click back 8 All icons and commands will the be displayed on your home screen which can then be pressed and operated SMS Remote Control Ec Pyronix Panel ab SMS Remote Control SI response Please wait Me no SMS Remote Control Description System Status Command Confirm Are you sure you want to Disarm Disarm Arm with Bypass 11 J Chime Feature The chime feature can be used on door contacts to enable a chime sound when a door input is opened This feature can be set up by your installer To disable the chime on the keypad close all doors and when c is displayed press the key a capital C will be displayed this will then activate the chime on any additional keypads with extension speakers installed If you wish to disable the chime altogether press the key again NOTE Chime should not be used on motion detectors
15. ges commands are not case sensitive except when the used outputs are activated NOTE If a text messages commands is not recognised by Enforcer it will send back to the user the wrong command Arming via SMS text command Example SMS command send Description Example SMS command response 123456 Arm A 123456 User Code Arm A Will arm the Enforcer in Area A Final Arm Area A 123456 Arm ABCD 123456 User Code Arm ABCD Will arm the Enforcer in Area ABCD Final Arm Area ABCD NOTE If no areas are specified then all areas will arm default In One Area Mode the default will be Area A Disarming via SMS text command Example SMS command send Description Example SMS command response 123456 Disarm A 123456 User Code Disarm A Will disarm Area A Disarm Area A 123456 Disarm ABCD 123456 User Code Disarm ABCD Will disarm the Area ABCD Disarm Area ABCD NOTE If no areas are specified then all areas will disarm default In One Area mode the default will be Area A Arming with inputs bypassed via SMS text command Example SMS command send Description Example SMS command response 123456 Arm A Bypass 4 123456 User Code Arm A Bypass 4 Arms Area A and will bypass input Input Bypass Area A Input 04 number 4 Force Arm Area A 123456 Arm A Bypass Kitchen 123456 User Code Arm A Bypass Kitchen Arms Area A and will bypass Input Bypass Area A Kitchen the input that is called Kitchen Force Arm Area A Bypassing in
16. ou present your tag to arm disarm LEFT GREEN LED After a valid tag is presented the GREEN LED will illuminate indicating the power status OK Ready LED Ready to arm Y Alarm LED Shows alarms Tamper LED Shows tamper alarms N ZN Alert Pending Fault LED Shows system faults al Disarm LED Shows system disarmed W Pyronix www pyronix com C Using the Keyfob The wireless keyfob has four buttons that may be programmed for specific functions no action show status arm area disarm area latch output timed output and PA alarm activation Locking the Keyfob All four buttons on the keyfob may be locked to prevent from a user accidentally pressing them Locking the keys on the keyfob is performed by pressing any buttons that are diagonal with one another at the same time LOCK a II or UNLOCK a 1 The RED LED will flash indicating that the fob has been locked To unlock press both buttons together again and the GREEN LED will flash indicating that the keyfob is now unlocked NOTE When the keyfob is locked all indications are also disabled Buttons The buttons can be customised to operate as desired programmed in the function Change Codes Below are examples on how each button can be programmed 9 BUTTON Programmed for Arm Area When pressed one or more areas will be armed aj BUTTON Programmed for Disarm Area When pressed one or more areas will disarmed
17. puts via SMS text command Example SMS command send Description Example SMS command response 123456 Bypass 6 123456 User Code Bypass 6 In the next arming procedure input Input Bypass Area A Input 06 number 6 will be bypassed 123456 Bypass Garage 123456 User Code Bypass Garage In the next arming procedure the Input Bypass Area A Garage input called Garage will be bypassed NOTE The name of the output has to be one word and spelled exactly as written in the panel For example Garage Door is not acceptable It has to be written as Garage Door in the panel and the respective command will be Garage Door W Pyronix 9 www pyronix com H SMS Commands GSM version only Continued Checking the System Status via SMS text command Example SMS command send Description Example SMS command response 123456 Status 123456 User Code Status Area A Disarmed No Faults Area B Disarmed No Faults Area C Disarmed No Faults Area D Disarmed No Faults Operating the User Automation Outputs via SMS text commands Example SMS command send Description Example SMS command response 123456 Output 1 On 123456 User Code User Output 1 turns on OUTPUT 1 ON 123456 Output Garage Door On 123456 User Code output Garage Door on Turns output named as OUTPUT Garage Door ON Garage Door on 123456 Output Garage Door Off 123456 User Code output Garage Door off Turns output namedas OUTPUT Garage Door OFF Garage Door off NOTE The use
18. r automation outputs can be also activated via the keypad or the keyfob NOTE The name of the output has to be one word and spelled exactly as written in the panel For example Garage Door is not acceptable It has to be written as Garage Door in the panel and the respective command will be Garage Door Checking the User Automation Outputs status via SMS text commands Example SMS command send Description Example SMS command response 123456 Output 1 Status 123456 User Code User Output 1 status check OUTPUT ON or OUPUT OFF 123456 Output Garage Door 123456 User Code Output Garage Door status check OUTPUT Garage Door ON or OUTPUT Status Garage Door OFF NOTE The name of the output has to be one word and spelled exactly as written in the panel For example Garage Door is not acceptable It has to be written as Garage Door in the panel and the respective command will be Garage Door Changing a Mobile Number via SMS text commands Example SMS command send Description Example SMS command response 123456 Change 07777888999 123456 User Code Change number 07777888999 to number CHANGE 07878888999 07878888999 07878888999 Example SMS command send Description Example SMS command response 123456 UDL 123456 User Code UDL The Enforcer will make an outgoing data No response as the panel is already connection to the programmed PC1 number connected to the PC1 9999 UDL 9999 Engineer Code UDL The Enforcer will make an outgoing data N
19. s o 60 RIX Address 3 61 RIX Address 3 O 62 RIX Address 3 OO 63 RIX Address 3 O 64 RIX Address 3 65 RIX Address3 uu 66 RIX Address3 JJ WPyronix www pyronix com N User Tables Q Code Tag Keyfob O O Mum gt U x Na O u e U O Code Tag Keyfob N N N rl N 27 Pyronix N www pyronix com Wired Outputs Latched Timed Type PGM1 Onboard ws STRB Onboard EE BELL Onboard YW m ss pem ROX PeM2 ROX PGM3 ROX ws PeMA ROX PeMS ROX PGM6 ROX Papa PMT ROK PeMB ROX pama ROX pamo ROX PEMIL RO PGM12 ROX PGM13 ROX pama ROX PGM15 ROX pamig ROX Wireless Outputs Type STRB 2 ss www pyronix com S Product Information For electrical products sold within the European Community At the end of the electrical products useful life it should not be disposed of with household waste Please recycle where facilities exist Check with your Local Authority or retailer for recycling advice in your country When disposing of the product and accessories the batteries must be removed and disposed of separately in accordance with the local regulations W Pyronix 29 www pyronix com u WPyronix www pyronix WPyronix 31 ww pyronix WOD XIUOJ d MMM NIDA yi 9 pa BA WOI XIUOJAA MMM 9 ISq2M A08 99S ueylayloy AQEIISH Aen eMure4g
20. ss Inputs Disables any sensor input on the system for the current arming period This feature also disables tamper alarms Operate User Outputs Activates deactivates user automation outputs that are used to activate remotely the devices such as electronic gates lights etc Date amp Time Programmes the date and time and enables the summertime automatic adjustment Learn User Codes Programmes the user codes tags and learns keyfobs to the Enforcer 32 WE Keyfobs and Tags Review Log The Review Logs function is used to view all operational information of the alarm system such as arming disarming information access control and alarm activations etc SMS Phonebook If SMS texting is enabled there will be up to 4 mobile numbers that can be programmed to send SMS alarms Please discuss this feature with your installer if required Walk Test The Walk Test function allows the testing of all programmed inputs on the alarm system Bell Test This function is used to tests the external siren wired and wireless and strobe PC Connect Menu The control panel may be dialled into and programming information kept on a PC using the InSite UDL software This function allows the control panel to dial a Pre programmed PC telephone number programmed by your engineer This is usually used by your engineer during a maintenance call NOTE 1 Pressing the A key will exit the master manager menu at any main menu option above NOTE 2 Make sure
21. t tag User Arm Options Area Arm Choice E User Name E d AH HR l WA lO A gt KE A A User Arm Options Area Arm Choice 0 Disarm Arm 0 No 1 Disarm Only 1 Yes 2 Arm Only 3 None Arm Area Choice If selected as Yes the user will be able to choose the area they wish to arm after they have entered a user code or presented a valid tag If selected as No the control panel will automatically arm all areas the keypad code is assigned to www pyronix com 4 3 Change Codes learn configure keyfobs 18 User Codes Tags Empty QUE a gt Enter User Code for 5 seconds until LEDs flash User Name Learn Keyfobs E CNN E allie ke gt Select Button Press C Key to DELETE code Press and Hold ANY button Select Button E Button Action 1 P If Arm Area 1 Lv AB qee gt Button 1 Show Status wi or Disarm Area A de o ee o o o T e o T oe T L 1 o o es e o o o Ld x ge A Button Action oo co co coc o 4 0 No Action If Operate Output _ _ k Output 01 y 1 Show Status TEE E 2 Arm Area 3 Disarm Area 4 Operate Output Output 1 Button LOCK 170 199 User Defined 1 30 2 Button UNLOCK 3 Button 4 Button II 5 Buttons LOCK UNLOCK 6 Buttons I II 7 Buttons LOCK 8
22. text Selects items and enters menus 4 Moves forward in the main menu and sub menu Exits option to sub menu and sub menu to How to navigate through the menu s A ANG NO Press to move forward when the user mode BACK Press to move backward when in the user mode YES Press to enter in a submenu or option when in the user mode Press to move from one option into another option while in a submenu LA Press to quick exit the user menu from any main menu written in capital letters CANCEL Press to move back from one programmable option to the previous option Main menus are indicated with capital letters and end with a question mark for example CHANGE CODES The sub menus are indicated with small letters and they also end with a question mark for example Learn codes tags keyfobs Programmable options are indicated with small letters and do not finish with question mark but Yes No or other options are offered In order to navigate in the menu system one has to answer to the questions in the main and sub menus For example if the question is CHANGE CODES Pressing YES will bring you in the sub menu Learn codes tags keyfobs Pressing YES will take you to the programmable options of this submenu Pressing NO will take you out of the individual option will move you up from one sub menu to the next sub menu or back to the main menu 27 Tag Area Where y
23. way ENFORCER two way ulirele EDS Su LEA 09 49 SMS Remote Control Arm All Disarm All System Status ANG User Manual INTERNAL SIREN WARNING The Enforcer 32 WE control panel contains a 100 dBA siren please be aware of this when in use C RINS1503 2 Software Revision gt V9 26 Contents Page A Introduction 3 B Keypads Readers 4 C Using the Keyfob 5 D Arming the Enforcer 6 E Disarming the Enforcer 7 F Arming disarming with the tag reader 8 G Open doors Arm and Disarm Entry Control 8 H SMS Commands GSM V9 2 or above only 9 H SMS Commands GSM version only Continued 10 I Pyronix SMS Control Mobile Phone Application 12 J Chime Feature 13 K Personal Attack From Keypad 13 L Fire Alarm From Keypad 13 M Master Manager Menu Options 14 N Entering the Master Manager Menu 15 1 Master Manager Menu Bypass Inputs 15 2 Master Manager Menu Operate User Automation Outputs 15 3 Master Manager Menu Configure Date amp Time 16 4 Master Manager Menu Change Codes Configure user codes learn tags and keyfobs 17 5 Master Manager Menu Review Logs Event memory logs 20 6 Master Manager Menu SMS Phonebook 21 7 Master Manager Menu Walk Test 21 8 Master Manager Menu Bell Test 21 9 Master Manager Menu PC Connect Menu 22 10 Master Manager Menu Allow Engineer Menu 22 11 Master Manager Menu Block Remote Arm 23 12 Master Manager Menu Block UDL 23 13 Master Manager Menu Exit Master Menu 24 O
24. you change the default master user code These features are needed to quickly set up the Enforcer www pyronix com Entering the Master Manager Menu 1 2 14 Enter Your Code BYPASS INPUTS NG Dj XXE powa Default Master User Code 1234 Time 02 53 C LT Master Manager Menu Bypass Inputs SE BYPASS INPUTS gt Bypass Input Bypass Input Input 01 oe Choose an Input 01 to 66 I I I BL OPERATE USER OUTPUTS Master Manager Menu Operate User Automation Outputs Select Output Output Off pasa On 01 Turn mi On Off Show Current Ouput Status i I i X E die i i lt Select User Automation Output 01 Output 1 i 30 Output 30 i gt _ DATE 8 TIME WPyronix www pyronix com 3 Master Manager Menu Configure Date amp Time Year 00 99 07 Hours 0 23 23 Summer Time Adj No 0 AA lt lt lt lt lt lt lt lt lt lt lt lt ER GP GP GP e EN w e m p Options 0 No 1 Yes rg 1 CHANGE CODES i 15 W Pyronix www pyronix com 4 Master Manager Menu Change Codes Configure user codes learn tags and keyfobs 4 1 Change Codes Configure User Codes Press C Key to DELETE code LEARN USER CODES Ens FORA A Up s lea y T yp y ZIP KEYFOBS 8 TAGS KA yA jb P HO User 0 1A e A
Download Pdf Manuals
Related Search
Related Contents
Aー0ー6 ガイ ドレールピンプラー取扱説明書 01 Mondeo Manual 01-2007 PDFファイル Copyright © All rights reserved.
Failed to retrieve file