Home Basic
Contents
1. Connect to the modules only appliances provided with the CE quality symbol e This symbol shows that the appliance complies with the Directions for Low voltage 72 23 EEG electricity safety e Never connect electrical appliances to the modules if the plug the cord or the appliance itself shows signs of damage e Do not let the products come into contact with water or any other liquid e Never open up the casing of the product The products do not contain spare parts which you can repair Environment Old electrical and electronic appliances often contain valuable materials They also contain harmful substances that were necessary for the operation and safety of the appliance If you dispose of the appliance with regular waste or in case of faulty treatment these substances can become harmful for the general health and for the environment Never discard the appliance with household waste but turn itin at your local depot for collection of electrical and electronic appliances Interference with electronic equipment Most modern electrical appliances are protected against RF signals However it is possible that certain electrical equipment is not protected against the RF signals transmitted by the products The products comply with the norm IEC EN 61058 Conformity with EU rules The products comply with the regulations of the Guideline for Radio equipment and Peripheral Equipment 1999 5 EG Service In case you have of question2. placed plugs appear in the list this can be due to one of the following reasons Not all plugs have been signed on or recognized by the network If multiple networks are active in the immediate surroundings the process to sign on the plugs may take a little longer After approximately 5 minutes all plugs should appear on screen One or more plugs are unreachable When a plug is placed too far from the others it cannot communicate with the network To solve this you can place the plug closer to the others or place another plug in between the unreachable plug and the others Please make sure that the distance between the plugs is no more than 5 meters The plug does not work If both abovementioned steps do not lead to a complete picture of your network in the screen of Select Modules you may reset the plug For a complete explanation of this procedure we refer you to the Detailed Manual to be accessed by clicking on the Question mark Icon on the lower right side of the program The Wizard will guide you further through a number of screens to entering data in order to create a network Proceed with all the steps of the wizard and click on complete The system will be activated Save the installation list with the Licence Code Use software Your Energy Management System is now installed By using the software you can now measure and switch your appliances You can save on your energy consumption by sending switching schedul
3. Plugwise Home Basic Installation manual User instructions Technical data Safety information Be wise plug in Content Check the content of your package for the following parts If something is missing we request you to contact us as soon possible bol of s a a 8 x Circle white 1 x Circle 1 x Stick white with grey back license code 1 x This manual 1 x Installationlist with software license code Welcome Thank you for purchasing the Plugwise Energy Management System the system that monitors and controls your energy consumption This User Manual provides you with information about installing the system the use of the software technical details and safety matters Installation Install the software Source e Go to the site www myplugwise com and follow the steps as they appear on the screen e Download the installation file and execute the installation e The installation wizard starts up e Follow the steps and press complete The software will be installed automatically on your computer e Extensive information will be found in the User Manual which will appear when you click on the Question Mark Icon located on the lower right side of the program CONFIGURATION OF THE NETWORK e After the installation of the software is complete the configuration wizard starts up automatically e Complete the steps Welcome and Licence You can find the Licence Code 25 characters o
4. es to the plugs As a service you may find hereunder a software window with instructions Overviews look at reports and graphs of the energy consumption the costs and the C02 emission Switching program switching schedules in order to save irect Switching the cted appliance or group rectly switched on off Usage data preset the timeframe for use The graph is empty until data have been received tick the Stick flashes ven data are retrieved Settings add plugs create groups and rooms l Technical information The computer can be switched off whilst the system continues to operate The plugs have their own memory so even when the computer is not switched on the measured data are stored and the plugs will switch according to the switching schedules you entered As soon as the computer is switched on with the Stick connected the stored data are retrieved from the plugs and the complete overview of the energy consumption is realized In order for the software to communicate with the products the Stick should be kept connected to the computer You may disconnect the Stick however this leads to interrupted communication between the plugs and the computer which means that the current usage is not displayed and new usage data are not claimed The disconnection does not interrupt the actions of the network or the data already stored in the software like the switching schedules As soon as the Stick in connected to the c
5. he Circle Circle and the Stick Environmental conditions Operational C 0 60 Operational RH non condensing 0 95 Storage C 20 70 Storage RH non condensing 0 95 Guarantee consumer products The general conditions of sale and delivery Plugwise B V Consumer apply to the Plugwise products These conditions can be found on the website www plugwise com or can be obtained from Plugwise free of charge During a period of twelve 12 months after delivery if the Plugwise System turns out to be faulty the Plugwise System shall be repaired replaced by Plugwise free of charge or to the extent relevant a missing part shall be delivered The obligations of Plugwise regarding the products are limited to the repair or replacement of the product such to the judgment of Plugwise Exchanged or replaced parts of products are property of Plugwise This guarantee is without prejudice to other statutory rights or claims of the Buyer The Buyer must inform Plugwise about the defect to the Plugwise System as soon as possible you must show a copy of the original receipt of purchase or other proof of payment explicitly excluded from all guarantee are components of use with a limited lifecycle subject to normal wear like batteries Plugwise is not liable for incidental damage or consequential damage resulting from or in connection with the use or misuse abuse of Plugwise products Plugwise does
6. n list Leave the other sticker on the plug See Fig 2 4 Write on the installation list next to the sticker the name of the Appliance connected to the plug and the room or location of the plug 5 Insert the plug in the socket and connect the appliance to the plug See Fig 3 sele 6 Return to your computer Wait until the tick appears next to the Circle before proceeding This may is di take a few minutes e Insert and Check Repeat the same procedure placing the next Circle attaching the sticker to the list until all of the a Circles have been placed You may place the other Circles one after the other without having to return to your computer in between Return to your computer when all of the plugs have been placed and the installation list is completed The wizard will show a tick each time contact has been established with one or more of the Circles When the icon appears you may click on Next e Inthe screen Select modules your network is displayed There are two 2 lists 1 Found Modules en 2 Your Plugwise Network The plug ID s displayed in the 2 list are already part of your network The plug ID s in the list 1 Found Modules not yet Select only the plug ID s from the list 1 Found Modules that correspond with the plug ID s of your already placed Circles Then click on the green arrow to incorporate those plugs into your network Attention When not all
7. n the installation list If you cannot proceed after having filled in the Licence Code please verify if you have used the correct code and your firewall does not block the internet access Allow the Plugwise Configuration Wizart full access in your firewall If needed cancel the installation and complete the steps again e The next step Security of the wizard makes sure that your network is secure Part I Registration of the plug ID s Enter the plug ID of the Circle and of the rest of the Circle s The plug ID five characters is located on the sticker attached to the back of the plug Do not remove the sticker yet Part II Enter your personal password This will prevent undesirable third parties access to your network Attention your personal password must consist of a minimum of 6 and a maximum of 10 characters Unfold this User Manual for continuation of the installation process Be wise plug in Continue installation e Stick Connect the Stick to your computer See Fig 1 Wait until a tick appears next to the Stick before proceeding with the Circle Circle 1 Pick up the plug Circle recognizable by the grey back the supplied installation list and a pen 2 Choose an appliance located in the vicinity of the Computer to be connected to the Circle 3 Two stickers are attached to the back of the plug Tear off one of the stickers and stick it on the reserved spaceon the installatio
8. not accept any liability for a defect or damage that has occurred during transport The Buyer cannot rely on the guarantee if the Plugwise System is used in another manner or for other purposes than for which it is intended if the Buyer performs or has others perform work to the Plugwise System without Plugwise s prior approval if the product has been exposed to careless behavior or has not been installed properly the damages or defect is the result of willful conduct or gross negligence the date on the purchase invoice is no longer legible the serial number the date code or the product label has been removed The content of this document is distributed without any form of guarantee whatsoever Unless required by applicable law no guarantee is provided regarding the accuracy reliability or content of this document either explicitly or implicitly including but not limited to implicit guarantees regarding to the sale ability and the suitability for a specific goal Plugwise reserves the right to amend or rescind this document at all times without preceding notification Safety information Save these instructions for future reference Electricity safety e Installand use the products only in the manner as described in de enclosed user documentation to ensure safe usage e The maximum wattage to be connected to a plug is 3680 Watt e Do not make use of the products in case they are damaged or malfunction e
9. omputer again the software program will have to be started again The computer then retrieves all data stored in the plugs and in case new switching schedules are entered they will be activated Technical data 1 Circle Parameters in Nominal Type Max Remarks Power supply Supply voltage 220 230 240 VAC Frequency 50 60 Hz Power dissipation 0 5 0 8 W Energy measuring Cumulative 1 0 2W At 25 C accuracy ambient temperature Actual 5 0 5W At 25 C accuracy ambient temperature Permanent memory Storage capacity 512 kByte Dimensions Lx w x h 81 3 x 72 x 43 5 mm ZigBee communication Baudrate 250 kbps 0 QPSK Frequency 2400 2483 5 MHz 16 channels of the 2 4GHz ISM band Bandwith 2 0 MHz 5MHz channel spacing Recieving sensitivity 92 dBm 1 PER signal to noise ratio 20 byte packet Transmission power 27 0 3 dBm 2 Circle The technical data of the Circle is useable for the Circle as well except that the Circle has extra internal memory a backup battery and a real time clock The next specifcation is specific for the Circle Parameters Min Nominal Type Max Unit Remarks Real time clock Lo Operating time without 20 days power supply 3 Stick Parameters Min Nominal Type Max Unit Remarks Power supply Supply voltage 5 Vdc Powered by USB host Dissipated power 0 375 W Connector USB A plug Usage and storagetemperatures for t
10. s after having read this Manual or in case part of itis either missing or damaged please visit our website or call our service number www plugwise com 0900 PLUGGED 0 30 per minute 0900 758 44 33 0 30 per minute
Download Pdf Manuals
Related Search