Pyle Miscellaneous Parts User Manual
Contents
1. OWNER S MANUAL Please Read the Manual First before Operation PYLE Home PT598AS 5 1 Channel 350 Watts Built In AM FM Radio Home Theater System Important Safety Information For Customers Thank you for purchasing the receiver We strongly recommend that you carefully study the operating instructions before attempting to operate the unit and that you note the listed safety information Caution You are cautioned that changes or modifications not expressly approved in this manual could void your authority to operate this equipment To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture To prevent fire do not cover the ventilation of the apparatus with newspapers table cloths curtains and etc Do not place lighted candles on the apparatus To prevent fire or shock hazard do not place objects filled with liquid such as vases on the apparatus Do not install the appliance in a confined space such as a bookcase or built in cabinet Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunlight or fire System Features e 5 1 Channel Amplifier Built In AM FM Radio e 2 MIC Input Treble and Bass of MIC Adjustable Independent MIC Volume Control Over Current Protection Short Circuit Protection And Over Voltage Pro2. 17 Bass volume decrease selector 18 Side right volume adjustment selector 19 Subwoofer volume adjustment selector 1 On the back of the remote control push the tab and lift off the battery cover 2 Obtain two 2 fully charged AAA batteries Match the and marks on the batteries to the and marks in the battery case then insert the new batteries 3 Align the cover keys with the case holes and press the cover back into place The tab should click when the cover is locked 4 Test the unit by pressing POWER or any mode key If the batteries are inserted correctly the selected mode key will blink once Note Do not leave the remote control in an extremely hot or humid place Do not use a new battery with old ones Do not mix manganese batteries with other kinds of batteries Do not expose the remote sensor to direct sunlight or lighting apparatuses Doing so may cause a malfunction Ifyou do not intend to use the remote control for an extended period of time remove the batteries to avoid possible damage from battery leakage and corrosion Basic Operation Turn on off the Power Press key to control the power on and off Master Volume Control Press the 22 gt or ES Key to adjust the main channel volume Side Left Channel Volume Control Side Left Vol Press key screen display the SL volume press ADJUST key to adjust side left channel volume Side Right Channel Volume Contro
3. FM antenna on raining days Radio stations cannot be tuned in Check that the antennas are connected securely Adjust the antennas and connect an external antenna if necessary The signal strength of the stations is too weak when tuning in with automatic tuning Adjust manually The remote control does not function No stations have been preset or the preset stations have been cleared tuning by scanning preset stations Obstacles exist between the remote and the receiver The remote batteries are weak Make sure you set the tuning interval correctly Remove any obstacles in the path between the remote and the receiver Replace all batteries in the remote control with new ones Incorrect input selection on the remote control Make sure you select the correct input on the remote control Error messages If appears a message there may be a malfunction You can check the condition of the system by the message Should any problems persist Consult your nearest dealer Protect Irregular current is output to the speakers The receiver will automatically turn off after a few seconds Check the speaker connection then turn on the power again MISC ACCESSORIES
4. l Side Right Vol Press key screen display the SR volume press ADJUST key to adjust side right channel volume Center Channel Volume Control Press So key screen display the CEN volume press ADJUST key to adjust center channel volume Subwoofer Volume Control Press key screen display the SW volume press ADJUST key to adjust subwoofer channel volume How to Adjust Treble TreB TroB Press key to adjust the treble output of the main channel How to Adjust Bass Bass Bass Press key to adjust the bass output of the main channel How to Play DVD Make sure DVD connection lines are correct Press the key to play DVD How to Play AUX Make sure AUX1 2 3 connection lines are correct Press the o a key to play AUX How to Play Tuner 1 Select Program Use key to select FM AM band Press the key to adjust the band of tuner Press the key for 2 seconds the FM will search automatically You can press the key once to stop the function 2 Listen to the Preset Program Press the number keys to select the radio program that you already saved Once selected screen will display the radio program s frequency in the memory area 3 Memory Program When you receive a clear radio program press the key first and then the screen displays the Memory icon Press one of the 12 number key on the remote control to select the memory station If you want to extrac
5. s not connected properly The signal plug is connected incorrectly or lines are short circuited The speaker line is not connected properly Turn on the power of sound source Read the manual Check the connection of the signal plug Read the manual Mode is not set properly Mode should be set that the center channel has output Side Surround channels have no sound The speaker line is not connected properly Read the manual Mode is not set properly Mode should be set that the surround channel has output for example 5 1 channel The sound of surround channel is low he sensitivity of speakers is too low Reset volume T The volume is set too low it he input signal is STEREO Change to 5 1 channel The sound of center channel is low Sound from speakers is out of order 4 he sensitivity of speakers is too low The volume is set too low Speakers are located inappropriately The lines are not connected properly or the Disc is defective Reset volume Read the manual Can t operate or display normally Affected by exterior strong disturbance Turn off first then turn on again Avoid direct sunlight heat PYLE MISCELLANEOUS PARTS Radio The FM reception is poor Need outdoor antenna Stretch the FM antenna of the receiver in the rear panel But please don t connect the receiver to an outdoor
6. t the channel you saved just press the number key you selected How to Mute Press 6 key to turn sound off on Press again to restore the audio to the original level Introduction of DSP Control Key Press the key repeatedly to switch to different operations Live Hall or Church All the above functions can give different sound effects Introduction of Source Output Selector Area Press key to receive 5 1 channel default mode Press key to receive 3 1 channel SL SR mute Press key to receive 2 1 channel SL SR CEN mute Trouble Shooting Use this chart to help you solve operational problems If there are any problems that can not be solved please contact Service Center Problem Possible Reasons Solutions Can t get through power supply Display can t be turned on The plug is not inserted properly Check power supply and plug The socket has no power Check socket and power supply The fuse is broken Replace the fuse Have not pressed POWER button Press the POWER button again No sound at all Neither of the main channels have sound Incorrect selection of input signal Read the manual carefully again The wire and lead are not connected correctly Check the wire and lead The mute state is turned on Turn off the mute state Center channel has no sound Sound source machine is not powered The speaker line i
7. t up when play DSP effect 4 DIGITAL DISPLAY Light up to display value of current input mode 5 KHz MHz KHz MHz ICON Light up when tuner input is selected and indicates the value on the display for KHz MHz 6 SPECTRUM DISPLAY Real Panel Connectors Stereo input ooo n U i Light up to display the spectrum of different channel Power JBJB la T PYLEJ PTS98AS Home DIGITAL 5 1 CHANNEL HOME THEATER SYSTEM AUXt AUX Speaker system Subwoofer Power Input AC 115V 60Hz 230V 50Hz P Lay L Side left zd VOLTAGE SELEGTOF ee ml ee Bene oe Front left Front right Side right Center Note The voltage displayed in the Voltage Selector MUST match with the actual voltage of input power Using the Remote Control Side Left Vol Side Right Vol PTS598AS Digital 5 1 Home Theater System Battery Installation 1 Power on off control selector 2 Tuner band control selector 3 Tuner memory selector 4 Channel source output selector 5 Treble volume increase selector 6 Left balance selector 7 Treble volume decrease selector 8 Side left volume adjustment selector 9 Center volume adjustment selector 10 Tuner number selector 11 Input mode selector 12 DSP control selector live hall church 13 Bass volume increase selector 14 Mute mode control selector 15 Master volume control selector 16 Right balance selector
8. tection 12 Preset Radio Station Full Remote Control VFD Display Power Input AC 115V 60Hz 230V 50Hz Power Output 300 Watts LR Channel 4 Ohm 50W for Center Surround L and Surround R 4 Ohm In out Selector 3 Stereo RCA Selector 1AM FM Radio 1 DVD 2 Microphone Input Output 5 Channel Speaker Output Terminal for L R Center SL SR And 1 line Out for Subwoofer Total Power Consumption 350W Front Panel Function O 000 OO a0 PT598AS Digital 5 1 Ghannel Home Theater System Master Vol B BG B Q Y 1 Tuner band adjustment knob 2 AUX1 input selector 3 AUX2 input selector 4 AUX3 input selector 5 FM AM input selector 6 VFD display window 7 DVD input selector 8 DSP Mode input selector 9 CH Mode selector 10 Mute control selector 11 Master volume adjustment knob 12 Power on off selector 13 Mic echo adjustment knob 14 Mic treble adjustment knob 15 Mic bass adjustment knob 16 Mic1 input socket 17 Mic2 input socket 18 Micl volume adjustment knob 19 Mic2 volume adjustment knob 20 Mic volume adjustment knob Front Panel Display Window SSS Name Function 1 STEREO AUX TUNER INPUT Light up when AUX1 2 3 FM AM input 2 AC 3 PROLOGIC DVD INPUT Light up when 5 1 channel or DVD input 3 DSP DSP STATE ICON Ligh
Download Pdf Manuals
Related Search