Home

Wonderful Communication, Mobile Life.

Contents

1. Clear Messages You can clear all the messages in Outbox Click to display the Message interface 2 Select the Outbox tab page to open Outbox 3 Click Local or SIM USIM to display the message list in local or SIM USIM card 4 Click to display the Prompt dialog box 5 Click OK to remove all the messages to Trash j Note When you clear all the messages saved in the SIM USIM card the messages are permanently deleted and not removed to Trash When you clear all the messages saved in Local the messages are directly removed to Trash Inbox Inbox is used to save your received messages In Inbox you can make calls and perform the following operations View Messages You can view the content and status of messages in Inbox cP 27 9 Message Services 1 Click to display the Message interface 2 Select the Inbox tab page to open Inbox 3 Click Local or SIM USIM to display the message list in local or SIM USIM card 4 Select a message in the list box 5 Double click a message and view its specific information in the preview area under the message list Note There are two icons in Inbox Unread messages Read messages e You can show or hide the message preview area by double clicking a message Ifthe preview area is not showed double click an unread message the status of the message record changes into read status e Ifthe preview area has been showed click an unread message t
2. Make Calls You can make calls through missed call records Click to display the Call Record interface Select the Missed radio button to display the missed call record interface Select a record in the list box Click amp to dial BR WNeR 5 Click to hang up the call Send Messages You can send messages to the phone numbers in missed call records 1 Click to display the Call Record interface 2 Select the Missed radio button to display the missed call record interface 3 Select single or multiple records in the list box 4 Click lt to display the Write interface ave 2 11 Call Record Management 5 Enter the related content and click Da to send the message Note If you click E the MTN F stLink Data Card automatically extracts Lf your selected phone number and display it in the entry box behind ia Save Phone Numbers You can save the phone numbers in missed call records Click to display the Call Record interface Select the Missed radio button to display the missed call record interface Select a record in the list box Click to display the New Contact Detail dialog box and edit the new contact detail 5 Click OK to save the phone number to phone book BR U Nel Note By default the contact information is saved in No Group Delete Records You can delete the records of missed calls Click to display the Call Record interface Select the Missed radio button to displ
3. Note e There are two icons in Outbox E Sending messages failed EA Sending messages succeeded e You can show or hide the message preview area by double clicking a message record When the message list in SIM USIM card is displayed you can reread the messages in SIM USIM card by pressing F5 24 SEO 9 Message Services Send Messages You can select one or more messages from Outbox to reply to them j Click to display the Message interface Select the Outbox tab page to open Outbox Click Local or SIM USIM to display the message list in local or SIM USIM card Select one or more messages in the list box which you want to reply to Click 2 to display the Write interface After editing the message click Dac to send it Note e You can reply to several messages at one time When you click amp the MTN F stLink Data Card automatically extracts your selected phone numbers and displays them in the entry fe box behind Resend Messages You can resend the important messages or the messages that were not delivered successfully j Nn Click to display the Message interface Select the Outbox tab page to open Outbox Click Local or SIM USIM to display the message list in Local or SIM USIM card Select a message you want to resend in the list box Right click it and select Resend in the shortcut menu Note You can only resend a message at one time CP zs 9 Message Services
4. Forward Messages You can select a message in Outbox to forward it j Click to display the Message interface Select the Outbox tab page to open Outbox Click Local or SIM USIM to display the message list in local or SIM USIM card Click a message in the list box Click to display the Write interface After editing the message click Dac to forward it Save Phone Numbers You can select a message from Outbox and save the corresponding phone number to Phone Book U p Click to display the Message interface Select the Outbox tab page to open Outbox Click Local or SIM USIM to display the message list in local or SIM USIM card Click a message in the list box Click to display the New Contact Detail dialog box Enter the correct information and click OK to save the phone number of the contact Delete Messages You can delete the unwanted messages in Outbox Click to display the Message interface Select the Outbox tab page to open Outbox Click Local or SIM USIM to display the message list in local or SIM USIM card 4 Select one or more messages in the list box 5 Click X to display the Prompt dialog box 25 TINE 9 Message Services 6 Click OK to remove the messages to Trash Note e When you delete a message saved in the SIM USIM card the message is permanently deleted and not removed to Trash When you delete a message saved in Local the message is directly removed to Trash
5. e You can delete contacts to change the group members e Ifthere is no SIM USIM Card in the left group tree you can right click the group tree and select Show SIM USIM in the shortcut menu Delete Groups You can delete the unwanted groups 1 Click E to display the Phone Book interface 2 Select a group to be deleted 3 Click under the left group tree and the Prompt dialog box is displayed 4 Click OK to delete the group Note e After a group is deleted all contacts in this group are removed to No Group Oh ve 10 Phone Book Management e You can not delete these three default groups Local No Group and SIM USIM Card Create Contacts You can add the information of new contacts 1 Click a to display the Phone Book interface 2 Select a group for the new contact in Local 3 Click to display the New Contact Detail dialog box 4 Enter the information of the contact in the dialog box click OK All the input parameters and their descriptions are listed below Parameter Value range Description Name Any character The name or pet name of the contact Mobile Phone Digits The mobile phone number of the and contact Home Phone Digits The home phone number of the and contact Business Phone Digits The office phone number of the and contact E mail Correct and The E mail of the contact valid E mail address Notes Any character The supplementary de
6. Windows 2000 Install the Data Card according to the specific prompt information if any step in your installation differs from what is described Here we will take the Windows XP operating system as an example Note Make sure that the MTN F stLink Data Card has been installed before the Data Card is inserted into your laptop Installing the MTN F stLink Data Card 1 Put the CD that contains the MTN F stLink Data Card into the CD ROM drive of your laptop 2 The installation procedures start automatically If the AUTORUN procedure does not respond please browse the CD to find and run the Setup exe Now the installation procedure should start automatically 3 When the Choose Language dialog box appears select the corresponding language and click OK 4 Install the MTN F stLink Data Card according to the instructions of the setup program 5 After successful installation a shortcut icon S for the MTN F stLink Data Card appears on the desktop Installing the Data Card Hardware 1 Insert the Data Card which contains the SIM USIM card into the PCMCIA slot of your laptop a HUAWEI 5 Installation Guide 2 Now the system will find the new hardware and initialize the new hardware Installation Shield Wizard automatically Removing the Data Card To remove the Data Card from your laptop please use the hardware removing function of the Windows system to stop the operation of the Data Card and then pull it out Follow the proce
7. the network modes and the information of current carriers and so on User Work Area The User Work Area often displays some data information and operating interfaces Different functions correspond to different work areas Operation Navigation Area The Operation Navigation Area displays the main function menu of the MTN F stLink Data Card such as the internet service call service SMS service phone book management call record management and so on Shortcut Icons and Keys The list below describes the shortcut icons and keys provided by the MTN F stLink Data Card Shortcut icon key Description To display the Connection interface lt Alt N gt To display the Call interface lt Alt C gt cE To display the Message interface lt Alt M gt To display the Phone Book interface lt Alt P gt To display the Call Record interface lt Alt R gt nwo ED 6 Descriptions of the MTN F stLink Data Card GUI Shortcut icon key Description ca lt Alt S gt To display the Setting interface L V lt Alt W gt To display the Main Menu F1 To display the related topic of online help Alt F4 To exit the MTN F stLink Data Card Status Information on the Screen The status information shown on the screen depends on the service that is going on All the status information and their descriptions are listed below Status information Description Signals Sig
8. 3 Technical Parameters Item Description laptop card type Type Il 68 Pin CARDBUS Radio system GSM GPRS EDGE 900MHz 1800MHz 1900MHz HSDPA WCDMA 2100MHz Radio frequency band HSDPA WCDMA 2100MHz 1920MHz 1980MHz 2110MHz 2170 MHz Uplink Downlink GSM GPRS EDGE 900MHz 880MHz 915MHz 925MHz 960MHz Uplink Downlink GSM GPRS EDGE 1800MHz 1710MHz 1785MHz 1805MHz 1880MHz Uplink Downlink GSM GPRS EDGE 1900MHz 1850MHz 1910MHz 1930MHz 1990MHz Uplink Downlink Radio power output WCDMA HSDPA 2100MHz Power Class 3 24dBm GSM GPRS 900MHz Power Class 4 33dBm GSM GPRS 1800MHz 1900MHz Power class 1 30dBm EDGE 900MHz Power Class E2 27dBm EDGE 1800MHz 1900MHz Power Class E2 26dBm Voice service 7 r WCDMA AMR 12 2kbps 10 2kbps 7 95kbps 7 4kbps 6 7kbps 5 9kbps 5 15kbps 4 75kbps GSM FR EFR HR AMR Item 13 Technical Parameters Description Data service GSM CS UL 9 6kbps DL 9 6kbps GPRS UL 42 8kbps DL 85 6kbps EDGE UL 118 4kbps DL 236 8kbps WCDMA CS UL 64kbps DL 64kbps WCDMA PS UL 384kbps DL 384kbps WCDMA with HSDPA PS UL 384kbps DL 1 8Mbps SMS service Support the SMS service based on GSM CS and WCDMA CS domain Support the SMS service based on EGPRS and WCDMA PS Concurrent ability one WCDMA CS voice one WCDMA PS Size DxWxH 120 mm x 54 mm x 10 mm Weight About 50g Battery Powered via the la
9. Draft tab page to open Draft 3 Click g to display the Prompt dialog box 4 Click OK to remove all the messages to Trash Trash Trash is used to save the messages deleted from Local not from SIM USIM cards In Trash you can perform the following operations View Messages You can view the deleted messages in Trash Click to display the Message interface 2 Select the Trash tab page to open Trash 3 Double click a message record and view its content in the preview area under the message list n 2 TE 9 Message Services Note You can show or hide the message preview area by double clicking a message record Recover Messages You can recover the messages in Trash to the saving places where they were deleted before 1 Click to display the Message interface 2 Select the Trash tab page to open Trash 3 Select a message in the list box 4 Click to recover it Delete Messages You can delete the unwanted messages in Trash Click to display the Message interface Select the Trash tab page to open Trash Select a message to be deleted in the list box Click X to display the Prompt dialog box Click OK to delete the messages in Trash permanently aA WNe Note When you delete the messages in Trash the messages are deleted permanently Clear Messages You can clear all the messages in Trash FP 39 9 Message Services Click to display the Message interface Select the Tra
10. If you click b the MTN F stLink Data Card automatically extracts your selected phone number and displays it in the entry box behind amp Save Phone Numbers You can save the phone numbers in received call records f Click e to display the Call Record interface Select the Received radio button to display the received call record interface Select a record in the list box Click to display the New Contact Detail dialog box Edit the new contact detail Click OK to save the contact information to phone book N AUA W Note By default the phone numbers of the selected records are saved in No Group Delete Records You can delete the records of received calls 1 Click to display the Call Record interface Select the Received radio button to display the received call record interface Select single or multiple records in the list box Click X to display the Prompt dialog box 50 TE N Aw 11 Call Record Management 5 Click OK to delete the received call records Clear Records You can clear the records of received calls Click E to display the Call Record interface 2 Select the Received radio button to display the received call record interface Click g to display the Prompt dialog box 4 Click OK to clear all the received call records Ww Dialed Calls Dialed call records include the names and phone numbers of dialed calls start time and conversation duration You can
11. New PIN confirmation ave 12 Settings and Information Query Note The MTN F stLink Data Card prompts the remnant entry times for PUK If you enter the incorrect PUK ten times consecutively the SIM USIM card is locked permanently In this case please consult related carriers If you do not use PUK to unlock PIN after SIM USIM card is locked you can not use the related functions of SIM USIM card For example accessing the Internet making and answering calls sending and receiving messages and reading message in SIM USIM card e After the SIM USIM card is locked you still can make emergency calls Upgrade In Service While accessing the Internet by using the data card you can upgrade the MTN F stLink Data Card in either of the following ways Manually upgrade Auto upgrade Manually Upgrade Do the following to upgrade the MTN F stLink Data Card manually Click and then select Online Update 2 Inthe Update Via Internet dialog box double click a server address or enter the server address in the Server URL text box 3 Click Next The data card starts to detect the program files for upgrading on the server If succeeded a list of programs for upgrading is displayed in the Update Via Internet dialog box Click Next to proceed Ifno program is detected it indicates that the current software is the latest Click Quit to quit upgrading 4 After the programs are downloaded exit the MTN F stLink Data Card Then cli
12. No service anv EE Internet Services You can access the Internet through the wireless networks of HSDPA WCDMA or GSM GPRS EGDE Browse the Internet After setting the connection you can connect to wireless network 1 Click Ed to display the Connection interface 2 Select a network profile name in the Profile Name list 3 Click en to connect to wireless network 4 Browse the Internet Disconnect 5 Click to disconnect from wireless network Note After connecting to wireless network you can start the internet explorer tools in your laptop to browse the Internet View Connection Information After connecting to a network you can view the specific information of data services in network 1 Click Ed to display the Connection interface 2 View the specific information of data services in the Connection interface 14 So 7 Internet Services All the connection parameters and their descriptions are listed below Parameter Description Connected Display the duration when connecting to wireless network Transfer Rate Display the current sending rate receiving rate sent maximum rate and received maximum rate Traffic Summary Display the received sent and summary volume Volume Statistic You can see the flow information in the Volume Statistic frame up to last time when you surf on the Internet including the sent volume received volume View Statistic Data 1 Click Ed to disp
13. OK in the Prompt dialog box Nn How to Dial the Telephone Numbers with Sign To enter press Shift and click at the same time or input them through the laptop keyboard Why cannot the Telephone Numbers be pasted Only telephone numbers such as 0123456789 are legal Confirm that no other character is contained in the cut or pasted texts cP 73 1 5 Warnings and Precautions Electronic Device e Switch off your wireless data card near high precision electronic devices The wireless data card may affect the performance of these devices e Such devices include hearing aids pacemakers fire alarm systems automatic gates and other automatic control devices If you are using an electronic medical device consult the device manufacturer and confirm whether the radio wave affects the operation of this electronic device Hospital Pay attention to the following points in hospitals or health care facilities e Do not take your wireless data card into the operating room OR intensive care unit ICU or coronary care unit CCU Do not use your wireless data card at places for medical treatment where it is prohibited to use wireless devices Area with flammables and Explosives In the area with inflammables and explosives disconnect your wireless data card from your PC and turn off the PC to avoid explosion and fire The area with inflammables and explosives include Gas station Area for stori
14. Right click one or more contacts to select Export Select Contacts To File in the shortcut menu in order to export the selected contacts information 4 Inthe Save As dialog box select a directory and enter the file name 5 Selecta file format from csv and txt and click Save to export the contact information to the specified file Export from Local to SIM USIM Card 1 Click E to display the Phone Book interface 2 Click Local to display the contact list in Local 3 There are two ways to export P 49 10 Phone Book Management e Click H to select Export all Contacts To SIM USIM Card in the shortcut menu in order to export all the contacts information Right click one or more contacts to select Export Select Contacts To SIM USIM Card in the shortcut menu in order to export the selected contacts information 4 In the Select dialog box select a type for the phone number to export and click o gt you can click T to cancel the selected phone number 5 Click OK to export the contact information to the phone book of SIM USIM card Export SIM USIM Card to Local 1 Click E to display the Phone Book interface 2 Click SIM USIM to display the contact list in SIM USIM card 3 There are two ways to export e Click T to select Export all Contacts To Local in the shortcut menu in order to export all the contacts information Right click one or more contacts to select Export Select Contacts To Local in the shortcut
15. Subscriber identity module Wideband CDMA Windows Internet Name Service BOM 31016565 Ver V1 11 anv o
16. can be caused e Do not use the wireless data card in dusty damp and dirty places or places with magnetic field Otherwise malfunction of the circuit can be caused Do not connect or disconnect the wireless data card when it is near your ears to avoid negative impact on your health When you carry or use the wireless data card keep it at least one inch 2 5 centimeters away from your body to avoid negative impact on your health caused by radio frequency leakage e Ona thunder stormy day do not use your wireless data card outdoors e Do not touch the wireless data card when it is running This may affect call quality and cause the wireless data card to operate with more power The wireless data card may interfere nearby TV sets and radios e In accordance with the international standards for radio frequency and radiation use wireless data card accessories approved by Huawei only Cleaning and Maintenance e Before you clean or maintain the wireless data card disconnect your wireless data card from your PC and turn off the PC Otherwise electric shock or short circuit may be caused Do not use any chemical detergent powder or other chemical agent such as alcohol and benzene to clean the wireless data card Otherwise part damage or a fire can be caused You can clean the wireless data card with a piece of soft antistatic cloth that is a little wet TE 15 Warnings and Precautions e Do not scratch the shell of the wir
17. in the SIM USIM card are imported the messages will be deleted from the SIM USIM card 3 ve 1 0 Phone Book Management The MTN F stLink Data Card supports to manage the information of contacts and groups export import the contacts information and send messages and make calls in phone book management You can perform the following management Information Management You can manage the information in Local and SIM USIM Card You can also directly send messages and make calls in Phone Book In Phone Book you can perform the following operations Create Groups You can add new groups to manage contacts by class 1 Click E to display the Phone Book interface 2 Select Local in the left group tree 3 Click B and a new group is displayed 4 Name the group as desired Modify Groups You can modify group names and change members in groups Rename Group Names 1 Click et to display the Phone Book interface 2 Selecta group and click M ve EF 10 Phone Book Management 3 Rename the group in the text box Note The group name can not be null The group name can not be duplicated You can not rename these three default groups Local No Group and SIM USIM Card Rearrange Group Members Click ee to display the Phone Book interface 2 Click and hold single or multiple contacts in a group and drag it or them to another group so you can remove the contacts in this group to another group Note
18. menu in order to export the selected contacts information Note e You can import the information in the csv file to the Outlook or Outlook Express e Click and hold single or multiple contacts in Local drag it or them to SIM USIM card in group tree and export the contact information to the phone book of SIM USIM card directly SIM USIM card determines the storage capacity of its phone book If the number of contact records in Local to export to SIM USIM card exceeds the SIM USIM card capacity the MTN F stLink Data Card automatically interrupts the export but the exported content is not affected Import to Phone Book You can import the contact information from the csv and txt files or the 4 rare 10 Phone Book Management phone book in SIM USIM card to Local or import the contact information from Local into the phone book in SIM USIM Card Import from Files into Local NOR Nn Click E to display the Phone Book interface Click Local to display the contact list in Local Click or right click on the contact list to select Import all Contacts From File in the shortcut menu In the Open File dialog box select a file Click Open and import the file information to Local Import from SIM USIM Card into Local Click E to display the Phone Book interface Click Local to display the contact list in Local 3 Click or right click on the contact list to select Import all Contacts From SIM USIM Card in t
19. perform the following operations through dialed call records Make Calls You can make calls through dialed call records Click a to display the Call Record interface Select the Dialed radio button to display the dialed call record interface Select a record in the list box Click amp to dial BR WNe 5 Click 3 to hang up the call Send Messages You can select single or multiple phone numbers in dialed call records to send messages 1 Click to display the Call Record interface nwo i 11 Call Record Management 2 Select the Dialed radio button to display the dialed call record interface 3 Select single or multiple records in the list box 4 Click lt to display the Write interface 5 Enter the related content and click Dac to send the message Note If you click E the MTN F stLink Data Card automatically extracts Lf your selected phone number and displays it in the entry box behind Save Phone Numbers You can save the phone numbers in dialed call records Click to display the Call Record interface Select the Dialed radio button to display the dialed call record interface Select a record in the list box Click to display the New Contact Detail dialog box Edit the new contact detail Click OK to save the contact information to phone book Nn WN Note By default the phone numbers of the selected records are saved in No Group Delete Records You can delete the records of di
20. r w 3 Click or press Enter to dial 4 Click to hang up the call Note e Click B one by one e Click g to enter or press Backspace to delete the entered phone number P o 8 Voice Services To enter press and hold Shift and then click at the same time e Enter only before the first digit of the phone number Dial through Phone Book You can select contacts in Phone Book to make calls 1 aa to display the Phone Book interface 2 Select a contact record in the list box 3 Click or right click the record to select Call in the shortcut menu 4 Click to hang up the call Note e Ifa contact has several phone numbers after you click 2 the Select dialog box is displayed You can select a phone number and click OK or press Enter to dial Ifthere is no phone number that you need you can search in the left Groups pane Dial through the Call Interface You can click in the Call interface to select contacts and make calls 1 Click e to display the Call interface 2 Click to display the Phone Book dialog box 3 Select a contact in the following two ways e Select Local or SIM USIM Card and select the corresponding contact in the list box below Enter the similar information of the contact name in the Search text box and the related information is displayed in the list box below 16 D 8 Voice Services 4 Click OK or press Enter to dial 5 Click to hang up the c
21. tab page to display the Network dialog box 3 Click Manual Choose Network and click Search to display a Prompt dialog box 4 Click Yes to display the results of the carriers in the Network Search list 5 Select the related carrier in the Network Search list 6 Click Register to finish settings j Connection Settings You can create modify and delete the settings of network connection such as configuring network names verifying users and setting IP addresses You can perform the following operations Create Connections You can make a new network connection Click e to display the Setting interface 2 Select the Connection tab page 3 Click New and configure network profile names verify users and set IP addresses and so on 4 Click Advanced to set authentication protocol DNS and WINS 5 After advanced settings click OK 6 After connection settings click Save you can click Cancel to cancel your creation All the connection setting parameters and their descriptions are listed below Parameter Description Profile name The profile name of the connection Number Mandatory For details consult related carriers Username For details consult related carriers Password For details consult related carriers APN For details consult related carriers med 12 Settings and Information Query Parameter Description IP The correct IP address such as 192 168 7 27 For details consul
22. F stLink E 620 Data Card ho FETES HER peat seer ree eee iiai oPRS E DGE 3G HSDPA Wonderful Communication Mobile Life Welcome to MTN F stLink Data Card from Huawei Technologies Co Ltd MTN F stLink Data Card User Manual Copyright 2006 Huawei Technologies Co Ltd All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co Ltd Trademarks w and HUAWEI are trademarks of Huawei Technologies Co Ltd All other trademarks mentioned in this manual are the property of their respective holders Notice The information in this manual is subject to change without notice Every effort has been made in the preparation of this manual to ensure accuracy of the contents but all statements information and recommendations in this manual do not constitute the warranty of any kind expressed or implied Safety Precautions Before using the wireless data card please read the safety precautions carefully and also let your children know these so that you can use your wireless data card correctly and safely For details see the section Warnings and Precautions Do not switch on your wireless data card when it is prohibited to use wireless device or when the wireless data card may cause interference or danger Do not use your wireless data card while driving Follow any rules or re
23. IM USIM card the messages are permanently deleted and not removed to Trash e When you delete the messages saved in Local the messages are directly removed to Trash Clear Messages You can clear all the messages in Report Click to display the message interface Select the Report tab page to open Report Click Local or SIM USIM to display the message list in local or SIM USIM card Click g to display the Prompt dialog box Click OK to remove all the messages to Trash Note e When you clear all the messages saved in the SIM USIM card the messages are permanently deleted and not removed to Trash e When you clear all the messages saved in Local the messages are directly removed to Trash CP ES 9 Message Services Import Messages You can import Outbox and Inbox messages from SIM USIM cards to your laptop Click to display the Message interface Select the Inbox or Outbox tab page Select SIM USIM to display the message list of SIM USIM card Select a few message records in the list Right click the records and perform the following operations in the shortcut menu Select Import to import the selected message to Local Select Import All to import all the messages in SIM USIM list to Local Click OK in the Prompt dialog box nABWN Re ion Note e Press and hold Ctrl and then click the messages to select one or more messages or press Ctrl A to select all the messages e After the messages
24. If you enter the incorrect PIN three times consecutively the MTN F stLink Data Card locks the SIM USIM card In this case you must use PUK to unlock PIN If you do not use PUK to unlock PIN after SIM USIM card is locked you can not use the related functions of SIM USIM card For example accessing the Internet making and answering calls sending and receiving messages and reading message in SIM USIM card e After the SIM USIM card is locked you still can make emergency calls Modify PIN After you enable PIN protection you can modify the current PIN and the new PIN automatically takes effect A 1 Click L J or right click J in the System Tray 2 Select PIN Operation Change PIN in the shortcut menu to display the Change PIN dialog box 3 Enter the old PIN and the new PIN 4 Click OK to finish the modification The parameters and their descriptions are listed below Parameter Value range Description Current PIN 4 to 8 digits The current PIN of the SIM USIM New PIN 4 to 8 digits New PIN Validate PIN 4 to 8 digits New PIN confirmation Note e The MTN F stLink Data Card prompts the remaining entry attempts for PIN If you enter the incorrect PIN three times consecutively the MTN F stLink Data Card locks the SIM USIM card In this case you must use PUK to unlock PIN 65 12 Settings and Information Query e If you do not use PUK to unlock PIN after SIM USIM card is locked you can not use the relate
25. aled calls 1 Click to display the Call Record interface 2 Select the Dialed radio button to display the dialed call record interface 3 Select single or multiple records in the list box 4 Click X to display the Prompt dialog box 52 IE 11 Call Record Management 5 Click OK to delete the dialed call records Clear Records You can clear the records of dialed calls 1 Click a to display the Call Record interface 2 Select the Dialed radio button to display the dialed call record interface 3 Click to display the Prompt dialog box 4 Click OK to clear all the dialed call records anv EE 1 2 Settings and Information Query The MTN F stLink Data Card provides various setting options so you can build a personalized platform and query or modify settings at any time General Settings The general settings include call alerts settings and message alerts settings Call Alerts Settings You can start or stop visual alerts and set alert rings as desired Click EZ to display the Setting interface 2 Select the General tab page to display the General dialog box 3 In the Call Alerts Settings frame select whether to start or stop the visual alerts Select the Display alerts when a call is coming checkbox to start the visual alerts Deselect the Display alerts when a call is coming checkbox to stop the visual alerts 4 Click Browse to display the Open dialog box 5 Select ring files for incoming calls a
26. all Note e You can search for a contact by name but not by phone number e Ifa contact has several phone numbers after you click OK or press Enter the Select dialog box is displayed You can select a phone number and click OK or press Enter to dial Dial through Call Records You can make calls in the Call Record interface through call records in the following ways Dial through Missed Call Records You can dial through missed call records in the Call Record interface Click to display the Call Record interface Select Missed to display the Missed interface Select the related record of missed calls in the list box Click B or right click the record to select Call in the shortcut menu to display the Call interface Ae UN e 5 Click to hang up the call Dial through Received Call Records You can dial through received call records in the Call Record interface Click Ee to display the Call Record interface Select Received to display the corresponding interface Select the related record of received calls in the list box Click 2 or right click the record to select Call in the shortcut menu to display the Call interface BR UN ave o 8 Voice Services 5 Click to hang up the call Dial through Dialed Call Records You can dial through dialed call records in the Call Record interface Click to display the Call Record interface Select Dialed to display the corresponding interface Select the rela
27. and make calls through the phone book directly MTN F stLink Data Card also supports the importing or exporting of phone book information to facilitate information management Call Record Management You can select a phone number in dialed received and missed call records to send messages make calls or to save the phone number Settings and Information Query You can build a personalized platform set the MTN F stLink Data Card and query or modify settings at any time HUAWE fa 2 What s in Your Packing Box Your MTN F stLink Data Card packing box contains AMTN F stLink Data Card e A CD ROM containing an installing program PDF documents of User Manual and Quick Start e A guide book for Quick Start 2 HUAWEI Getting to Know Your Data Card The following is an illustration of a MTN F stLink Data Card Insert card F stLink 620 Data Card Note This is a schematic picture of a MTN F stLink Data Card Your Data Card may be different from this one It is subject to your actual one anv 3 Getting to Know Your Data Card Earphone Jack Please insert your earphone into the jack on the Data Card when you have call services Indicator Status indicator of the Data Card displays green or blue light Green light When the Data Card is inserted into the PCMCIA slot of your laptop the green indicator lights e When the Data Card is searching for the network the green indicator lights W
28. ay the missed call record interface Select single or multiple records in the list box Click X to display the prompt dialog box Click OK to delete missed call records Ae UN e Oh we 11 Call Record Management Clear Records You can delete all the records of missed calls 1 Click to display the Call Record interface 2 Select the Missed radio button to display the missed call record interface 3 Click g to display the Prompt dialog box 4 Click OK to clear all the missed call records Received Calls Received call records include the names and phone numbers of incoming calls start time and conversation duration You can perform the following operations through received call records Make Calls You can make calls through received call records Click to display the Call Record interface 2 Select the Received radio button to display the received call record interface 3 Select a record in the list box 4 Click to dial 5 Click to hang up the call Send Messages You can select single or multiple phone numbers in received call records to send messages 1 Click to display the Call Record interface 2 Select the Received radio button to display the received call record interface 3 Select single or multiple records in the list box anv o 11 Call Record Management 4 Click b to display the Write interface 5 Enter the related content and click Dac to send the message Note
29. ccccccecstecsecsseessessseesseesseesseessees 37 Information MANaGeMe ceccscecsecsseeccseecreeesneeesneeenneeeees 37 Export Import ManageMe nh cccccccccessseesseesseesseeceseeeseeees 43 11 Call Record Manageme nt uu cccccccssecsscessseesseesseesseesseesseee 47 Missed CalllSy secss ctosiccnccesdviscatntoalnac ends badsadeasdetes 47 RECEIVED Call ereis tahe ehi 49 Dialed Calls ccccccseesssesssessssesssecssscssecssecssscsssecsseessseesseesseesiee 51 12 Settings and Information Query occ cesseesseeseesseeenen 54 General Settings o oo cess essseesstecssecsseessessseesseessecsseesseeseees 54 Advanced Settings 0 ecsssesssssseesecsseessecssecsseecsseesseeeneess 56 Network Settings 2 ccccccsscsssesssesssecssecsseecsecsuessseeestessneesseesses 59 ii HUAWEI Contents Connection Settings oo ccccccc cess eessecssecesessseesseesseesseesseeesees 61 SYSTEM SettingS cc ccssssssseesseessesssecssecsssessseesseesseccseceseesseess 63 PIN Management ascii suepidutintonasntiasodnnilanariudust 64 Upgrade IN ServiCe on ccccccccccccsseessecsseessseesseessecssecsseecsteesseeeseees 68 View Diagnostics Information ou eee tecesseeesteeeneeeees 69 About MTN F stLink Data Card ceeceeeeseeeeeeeee 69 eclechnical Parameters lt 21 cea cae won eedan manne aan 70 14 FAQ on MTN F stLink Data Card cece 72 15 Warnings and Precautions 0 ccccccecseessessseesseesseesseessees 74 Electronic Device on ccccccssecsstesssecsseessssesseesse
30. ck Next to start upgrading o ve 12 Settings and Information Query 5 Wait until the upgrading process is finished You will see the message Congratulations Upgrade completed successfully Click Quit to finish Auto Upgrade Do the following to auto upgrade the MTN F stLink Data Card 1 Inthe Update Via Internet dialog box select the Select to check for software updates on connection check box 2 Save the setting Whenever your PC accesses the Internet through the data card the data card automatically detects whether there is any newer version program on the server If yes the Update Via Internet dialog box is displayed showing the list of programs for upgrading Then you can choose to upgrade the program by following the steps 4 and 5 in Manually Upgrade View Diagnostics Information In diagnostics information you can view the quantity of messages and contacts in SIM USIM card IMEI number IMSI number FirmWare Version Hard Ware Version Model ID and SN z7 1 Click L or right click J in the System Tray 2 Select Diagnostics in the shortcut menu 3 The MTN F stLink Data Card displays the diagnostics dialog box About MTN F stLink Data Card You can view the version of MTN F stLink Data Card its copyright and so on y 1 Click L J or right click j in the System Tray 2 Select About in the shortcut menu 3 The MTN F stLink Data Card displays the About MTN F stLink Data Card dialog box P o 1
31. cssecsseessecsseeeseess 74 Hospitales ereen a a E 74 Area with flammables and Explosives 0 ccccceceeee 74 Traffic Safety occ ea a a a 75 Storage Environment ues eesssecssecsseessseesseesseesseesseeesees 75 Children Safety oo ccsssssssessesssesssecssessssesssesssecssecssecsseessees 76 Operating ENvirONMent 0 ccc ccsssesssessseesseesseesseesseesseessees 76 Cleaning and Maintenances eeceeceeccsescsesssteeeseeesteeenneee 76 Environmental Care ccccccccccsccsssessessseessecsseessecsseesseecstecsseeeseess 77 Emergency Call ccncnoscna cuonmeesoraueationaasedion 77 iGsSADDFEViAallOMSeeme eee eee ee ee renee 78 Overview Welcome to the MTN F stLink Data Card With this product you can easily access the following Internet Services You can access the Internet by connecting to networks and surf the Internet conveniently Voice Services You can make calls to terminals such as the mobile phone fixed line phone after inserting SIM USIM card to your laptop Message Services MTN F stLink Data Card provides message services and features the large storage capacity and easy manageability You can edit receive and send messages and make calls through message records directly on your laptop after inserting the SIM USIM card Phone Book Management You can transfer the phone book information of a large capacity to your laptop You can create modify and delete the phone book information and also send messages
32. d functions of SIM USIM card For example accessing the Internet making and answering calls sending and receiving messages and reading message in SIM USIM card After the SIM USIM card is locked you still can make emergency calls Enable PIN Protection You can enable the PIN protection of SIM USIM card After enabling the protection you must verify PIN at the next startup of the MTN F stLink Data Card y 1 Click L J or right click Ja in the System Tray 2 Select PIN Operation Enable PIN Check in the shortcut menu 3 Enter the correct PIN in the Enable PIN Check dialog box 4 Click OK in the prompt dialog box Note e After enabling the PIN protection you can disable PIN protection based on your requirements The MTN F stLink Data Card prompts you the remaining entry attempts for PIN If you enter the incorrect PIN consecutively for three times the MTN F stLink Data Card locks the SIM USIM card In this case you must use PUK to unlock PIN Ifyou do not use PUK to unlock PIN after SIM USIM card is locked you can not use the related functions of SIM USIM card For example accessing the Internet making and answering calls sending and receiving messages and reading message in SIM USIM card e After the SIM USIM card is locked you still can make emergency calls Disable PIN Protection You can disable the PIN protection in SIM USIM card After disabling the protection you do not need to verify PIN at the next sta
33. dure below 1 Double click the icon on the lower right of your laptop screen an Unplug or Eject Hardware dialog box is displayed 2 Stop the use of the Data Card hardware NEC PCI to USB Open Host Controller 3 After the system prompts that it is safe to remove the device pull out the Data Card Note Do not remove the Data Card directly without following the above procedures lest your laptop may be harmed e Do not remove the Data Card when the operating system is in the Hibernate or Standby mode 5 Installation Guide Uninstalling the MTN F stLink Data Card There are two methods to uninstalling the MTN F stLink Data Card e You can uninstall the MTN F stLink Data Card through the Add Remove function of Control Panel in the operating system You can select Programs Huawei Data Card Uninstall in the Start menu to uninstall the MTN F stLink Data Card Descriptions of the MTN F stLink Data Card GUI Start the MTN F stLink Data Card 1 To start the program double click the shortcut icon oe of the MTN F stLink Data Card on the desktop 2 If it prompts to enter the PIN Personal Identification Number enter a valid PIN and click OK Note You have three chances to enter a valid PIN If you enter a wrong PIN thrice your SIM USIM card would be locked If this happens use the PUK PIN Unblocking Key to unlock it You have 10 chances to enter a valid PUK If you enter a wrong PUK ten times your SIM USIM ca
34. ect one or more contacts or enter phone numbers in the entry box directly 4 Enter the message content in the edit area 5 After editing the message you can e Click to send the message e Click to save the message in Draft e Click oO to clear the entered phone number and message content Note e No matter whether a message is sent successfully or not the message content is automatically saved in Outbox You can send messages to a maximum of 20 phone numbers each time The phone numbers should be separated by semicolons P 20 9 Message Services e You can edit the message content within 500 English characters each time Each message can hold a maximum of 160 English characters each time If the message content exceeds the maximum size for one message the content will be separated into multiple messages for sending Outbox Outbox is used to save the sent messages including the messages sent successfully and unsuccessfully In Outbox you can check whether a message is sent successfully make calls by selecting a message and perform the following operations View Messages You can view the content and the status of messages in Outbox Click to display the Message interface 2 Select the Outbox tab page to open Outbox 3 Click Local or SIM USIM to display the message list in local or SIM USIM card 4 Double click a message and view its specific information in the preview area under the message list n
35. eless data card Otherwise the shed coating may cause skin allergy Once it happens stop using the wireless data card at once and go to see a doctor Ifthe wireless data card or any of its fittings does not work turn to the local authorize service center for help Environmental Care Please observe the local regulations regarding the disposal of your packaging materials old wireless data card and please promote their recycling Do not dispose of old wireless data card in a dustbin or fire Otherwise explosion can be caused Emergency Call You can use your wireless data card for emergency calls However connections in all conditions cannot be guaranteed You should never rely solely on the wireless data card for essential communications ave 7 APN BDN CS DNS EDGE FDN 2G 3G GPRS GSM 73 TE 1 6 Abbreviations Access Point Name Barred Dialing Numbers Circuit Service Domain Name Services Enhanced Data Rates for GSM Evolution Fixed Dialing Numbers The 2nd Generation The 3rd Generation General Packet Radio Service Global System for Mobile Communications MCS PIN PS PUK SDN SIM UMTS USIM WCDMA WINS 16 Abbreviations High Speed Downlink Packet Access Internet Protocol Modulation Coding Scheme Personal Identification Number Packet Switched Service PIN Unblocking Key Service Dialing Numbers Subscriber Identity Module Universal Mobile Telecommunications System UMTS
36. essage interface 2 Select the Inbox tab page to open Inbox 3 Click Local or SIM USIM to display the message list in local or SIM USIM card 4 Select a message in the list box 5 Click to display the New Contact Detail dialog box P 29 9 Message Services 6 Enter the correct information and click OK to save the phone number of the contact Delete Messages You can delete the unwanted messages in Inbox 1 Click to display the Message interface 2 Click the Inbox tab page to open Inbox 3 Click Local or SIM USIM to display the message list in Local or SIM USIM card 4 Select one or more messages to be deleted in the list box 5 Click A or right click the records to select Delete in the shortcut menu to display the Prompt dialog box 6 Click OK to remove the messages to Trash Note e When you delete a message saved in the SIM USIM card the message is permanently deleted and not removed to Trash When you delete a message saved in Local the message is directly removed to Trash Clear Messages You can clear all the messages in Inbox 1 Click to display the Message interface 2 Select the Inbox tab page to open Inbox 3 Click g to display the Prompt dialog box 4 Click OK to remove all the messages to Trash Note When you clear all the messages saved in the SIM USIM card the messages are permanently deleted and not removed to Trash 90 TE 9 Message Services When you clear all the mes
37. ge settings You can also select the carrying domain and valid period of messages and set SMS center numbers Click Ea to display the Setting interface Click the General tab page to display the General dialog box In the Message Alerts Settings frame click Advanced Set options in the SMS Settings frame After finishing the settings click Confirm to save the settings 59 TIS nABWNrR 12 Settings and Information Query The advanced message setting parameters and their descriptions are listed below Parameter Description Request status report If you enable this function the network sends return notifications when messages are sent successfully Use same SMS centre for reply Set the SMS center number of the receiving party to that of the sending party when replying to messages SMS Bear The carrying domain used for sending messages PS Preferred Select data domain when sending messages CS Preferred Select circuit domain when sending messages Validity Select the SMS saving validity in the SMS center Current SMS center Note You can change the SMS center number After inserted the SIM USIM card with the SMS center number the MTN F stLink Data Card can automatically verify the center number If the number is empty or you delete the number by mistake contact the supplier of the SIM USIM card Under the General tab page click Default to restore all the default settings i
38. gulations in hospitals and health care facilities Switch off your wireless data card near medical apparatus Switch off your wireless data card in aircraft The wireless data card may cause interference to control signals of the aircraft B H B 0 tS Switch off your wireless data card near high precision electronic devices The wireless data card may affect the performance of these devices Do not attempt to disassemble your wireless data card or its accessories Only the qualified personnel is allowed to service or repair the wireless data card Do not place your wireless data card and its accessories in containers with strong electromagnetic field Do not place magnetic storage media near your wireless data card Radiation from the wireless data card may erase the information stored on them Do not put your wireless data card in a high temperature place or use it in a place with flammable gas such as a gas station Keep your wireless data card and its accessories away from children Do not allow children to use your wireless data card without guidance e e E N N Observe any laws or regulations on the use of wireless data cards Respect others privacy and legal rights when using your wireless data card Contents TEON Wire ce rrier ate ene ear rane E ce acne 1 2 What s in Your PaCking Box aa E 2 3 Getting to Know Your Data Card ccccccccscsseseeseesseecnen 3 A Gellingistaned
39. he status of the message record changes into read status If SIM USIM card is full the new incoming messages can not be received and the Prompt dialog box is displayed e When the message list in SIM USIM card is displayed you can reread the messages in SIM USIM card by pressing F5 Reply Messages You can reply to messages saved in Inbox 1 Click to display the Message interface 2 Select the Inbox tab page to open Inbox 3 Click Local or SIM USIM to display the message list in local or SIM USIM card 4 Select a message in the list box 5 Click 2 to display the Write interface 6 After creating a message click Dac to send it 23 TIE 9 Message Services Note e You can only reply to a message each time When you click the MTN F stLink Data Card automatically extracts your selected phone number and displays it in the entry box T o behind Forward Messages You can forward messages saved in Inbox 1 Click to display the Message interface 2 Select the Inbox tab page to open Inbox 3 Click Local or SIM USIM to display the message list in local or SIM USIM card 4 Select a message in the list box 5 Click to display the Write interface 6 After editing the message click Pac to send it Note You can only forward one message to one or more contacts at a time Save Phone Numbers You can select phone numbers of messages and save them to Phone Book 1 Click to display the M
40. he shortcut menu in order to import the contact information in the SIM USIM card to Local Import from Local into SIM USIM Card Click et to display the Phone Book interface 2 Click SIM USIM to display the contact list in SIM USIM card 3 Click or right click on the contact list to select Import all Contacts From Local in the shortcut menu In the Select dialog box select a type for the phone number to import and click es You can click to cancel the selected phone number Click OK to import the contact information to the phone book in SIM USIM Card Note e When importing the information of a specified file to the Local the field name in the file must have a matching field in Local If no field matches with each other the MTN F stLink Data Card prompts that the format is error HUAWEI et iS 10 Phone Book Management e You can export the information in Outlook or Outlook Express to the csv file and then import the information in the csv file to the Data Card e You can click and hold single or multiple contacts in SIM USIM card drag it or them to Local in order to import the contacts information to Local directly Gh ve 1 1 Call Record Management You can send messages make calls and save phone numbers call records include Missed Calls Missed call records include the names and phone numbers of incoming calls and the start time You can perform the following operations through missed call records
41. hen the Data Card registers to 3G network the green indicator lights When the Data Card works for any ongoing data transmission in the network mode of 3G HSDPA WCDMA green indicator blinks The status of the indicator is on for 100 ms and off for 100 ms Blue light When the Data Card registers to GSM network the blue indicator lights t When the Data Card works for any ongoing data transmission in the network mode of 2G GPRS EDGE the blue indicator blinks The status of the indicator is on for 100 ms and off for 100 ms 4 Getting Started Laptop Configuration Requirements To use the Data Card the following are required for your laptop A type II PCMCIA Card slot supporting CARDBUS A133 MHZ Pentium processor or above 500 MHz Pentium or the microprocessor with higher frequency is recommended 32 MB RAM or above The memory of 128 MB or above is recommended 30 MB idle hard disk or above Windows XP or Windows 2000 operating system Display resolution of 800 x 600 pixels or above Display resolution of 1024 x 768 pixels is recommended Preparing the Data Card 1 Take out the MTN F stLink Data Card from the protective cover 2 As shown in the following figure insert the SIM USIM card into the slot on the back of the Data Card and make sure the golden contact on the card is facing downwards Installation Guide There are slight differences in the installation procedures between Windows XP
42. iiancanrsre eerie one ener een etsy 5 Laptop Configuration Requirement 0 ce eee 5 Preparing the Data Card oi eessecsesssiesseesseesseesseeeseen 5 palnistallation Guide rase a a em enema 6 Installing the MTN F stLink Data Card ue 6 Installing the Data Card Hardware jc ccccseccsessseesneeeesees 6 Removing the Data Card o ccesscssssssssesssessssvecsnseesssecssoseesnsecnsees 7 Uninstalling the MTN F stLink Data Card 8 6 Descriptions of the MTN F stLink Data Card GUJ 9 Start the MTN F stLink Data Card cece 9 Introduction to the Main Screen uu cess tecsteeeseeees 10 IME ME LE Sevi cesti a unten enue moana ansuin 14 Browse the Internet ccc ssssecssecsseecssecssecesecesessseesseesses 14 View Connection Information ees eeesteesteeenieen 14 Volume Statistic oo ccc sessessssssecsecsseessecsseesseecseeesseeeneess 15 SWOICEISEIVICES EA S Veh k ee be awn CUP Onn SAE ABI CRAR ACL ORCA AT ee 17 Contents Make Calls shan hechtn aateatad ecedOaa Rlae ya eNacah Gontas LiRcSeabantas 17 PIS WCE alll S oneen cad eercad eid tendon e RS 21 Adjust Volume and Set Mute 00 0 ccccccsccsseecstecseeeneeens 21 OIMeSSage SeIVICES Fee ia ce E eee 23 Write Messages iirics dieinaindHoiindiabinstoemen duds 23 OLUD OX aesa E A 24 01E EA E A TNA 27 Drafts iiasal eaa a a ia 31 trashe eoa A a E A 32 Repor neiem e EN i atlas 34 Import Messages a cisicsasrpierainslonaaoncipinsageuin eaves 36 10 Phone Book ManageMe nh c
43. lay the Connection interface 2 Display the volume statistic data in the Volume Statistic frame All the volume statistic parameters and their descriptions are listed below Parameter Description Last Volume Displays the volume information when you browsed Statistic the network last time including the sent volume the received volume and the duration Total Volume Displays all the total statistic information after clearing Statistic the volume statistic information last time including the sent volume received volume and the duration Last Clear Displays the time of last clearance Time CP 15 7 Internet Services Clear Statistic Data You can clear the data of the last volume statistic and the total volume statistic data 1 Click Ed to display the Connection interface 2 Click to display the Prompt dialog box 3 Click OK to clear all the volume statistic data 16 Sa Voice Services MTN F stLink Data Card provides voice services that are similar to mobile phone and also has advantages such as easy operability and stable signals To enjoy the voice service insert the earphone into the earphone jack in the Data Card Make Calls The MTN F stLink Data Card provides multiple shortcuts for dialing Dial by Entering Numbers You can enter numbers in the Call interface to dial directly 1 Click EA to display the Call interface 2 Click numbers in the Call interface or enter numbers through keyboard
44. lick Confirm to save the network connection type 59 12 Settings and Information Query All the connection types and their descriptions are listed below Parameter Description Band Select one of network connection bands There are three selections All Band GSM 1900 GSM900 1800 WCDMA2100 Choose Connection Select one of network connection types Type GPRS EDGE If you select this option the Data Card first Preferred selects GPRS EDGE network when possible 3G Preferred If you select this option the Data Card first selects 3G network when possible GPRS EDGE Only If you select this option the Data Card only selects GPRS EDGE network 3G Only If you select this option the Data Card only selects 3G network Select Network Searching Modes You can set the network searching as manual or auto mode The settings include Auto Network Searching After you select connection types you can set the Data Card to search for a network automatically and register to the carrier of the Data Card 1 Click e to display the Setting interface 2 Select the Network tab page to display the Network dialog box 3 Click Auto Choose Network to finish settings Manual Network Searching After you select connection types you can search for a network manually and register to the carrier of the Data Card 60 SEE 12 Settings and Information Query Click e to display the Setting interface 2 Select the Network
45. lick e to display the Setting interface 2 Select the System tab page to display the System dialog box 3 Select whether to allow suspend after startup Select the Allow standby or hibernate checkbox the MTN F stLink Data Card allows the operating system to return to standby or hibernate status Deselect the Allow standby or hibernate checkbox the MTN F stLink Data Card does not allow the operating system to return to standby or hibernate status 4 Click Apply or OK Note If your laptop recovers to the working status you need to connect to wireless network again PIN Management PIN can prevent your SIM USIM card from illegal usage Usually PIN is provided along with SIM USIM card You can modify PIN or set whether PIN is required at the MTN F stLink Data Card startup or not PIN management includes the following operations Verify PIN After you Enable PIN Protection you must enter the correct PIN to use the related functions of SIM USIM card such as accessing the Internet making and answering calls sending and receiving messages and reading messages in SIM USIM card 1 After starting the MTN F stLink Data Card display the Check PIN dialog box 2 Enter the correct PIN in the Check PIN dialog box 3 Click OK to finish the PIN verification p rare 12 Settings and Information Query Note The PIN value ranges from 4 to 8 digits The MTN F stLink Data Card prompts the remaining entry attempts for PIN
46. n the General tab page not including Advanced settings Advanced Call Settings Call Forward You can forward calls to other phones and query or cancel the call forward For example when your mobile phone is out of power or you are on a business trip you can use this function to forward calls to a fixed line telephone ave e 12 Settings and Information Query nNBWNe Click e to display the Setting interface Click the General tab page to display the General dialog box In the Call Alerts Settings frame click Advanced Select the Forward tab page Select the call forwarding condition you can Click Activate to set the forwarding number and waiting time Click Query to query whether the call forward is registered Click Deactivate to cancel the registered forwarding condition All the call forward parameter and their description are listed below Parameter Description Condition The criteria to determine whether to forward calls State The status displays whether a call is forwarded If registered it displays that the forward is registered Telephone Number When an incoming call meets the forward condition it is forwarded to your pre set phone number Time The call is forwarded after the set waiting time The wait times are 5s 10s 15s 20s 25s 30s Unconditional To forward all the incoming calls to your pre set phone number Mobile busy When you are in a busy line a
47. nal strength indication in current network Missed calls When there are missed calls The icons N A flash in the Status Display Area The Missed Call alert box is displayed in the upper left corner of your laptop screen Unread messages 2 D When there are unread messages The icons g flash in the Status Display Area If you put the cursor on the icon the total number of unread messages is displayed The Unread Message alert box is displayed in the upper right corner of your laptop screen Status information Descriptions of the MTN F stLink Data Card GUI Description New calls When there is an incoming call The icon S flashes in the System Tray of your laptop screen The Prompt dialog box is displayed in the lower right commer of your laptop screen You can click Answer in the dialog box to receive the call quickly New messages When there are new messages The icons g j g flash in the Status Display Area The Prompt dialog box is displayed in the lower right corner of your laptop screen You can click View in the dialog box to see the message in the Inbox Carriers Displays the related information of the current network carriers System mode Display the information of system mode The descriptions of status are as follows e GPRS EDGE 2G network data service is available 3G 3G network high speed data services are available No display
48. nd click Open 6 You can click Play to listen to rings 7 In the setting interface click Apply or OK 54 Sam 12 Settings and Information Query Note e Ifyou select the Display alerts when a call is coming checkbox the icon sy in the System Tray flashes continuously whenever there is an incoming call e Ifyou select the Display alerts when a call is coming checkbox there is a Prompt dialog box in the lower right corner of your laptop screen whenever there is an incoming call you can click Answer to answer the call quickly After you select a ring file the corresponding ring alert is played when there is an incoming call e For advanced settings such as Forward refer to Advanced Call Settings Under the General tab page click Default to restore all the default settings in the General tab page not including Advanced settings Message Alerts Settings You can start or stop visual alert and ring alert as desired nN Click e to display the Setting interface Click the General tab page to display the General dialog box In the Message Alerts Settings group box select to start or stop the ring alert Select the Play a sound when a message is received checkbox to start the ring alert for messages Deselect the Play a sound when a message is received checkbox to stop the ring alert for messages In the Message Alerts Settings group box select to start or stop the visual alert Select the Di
49. ng fuels such as the bunk under the deck of a ship e Device Vehicle for transporting and storing fuels or chemical products e Area with chemical substances and particles such as granule dust metal powder in the air Area with the sign of Explosives e Area with the sign of Turn off bi direction wireless equipment 74 roar 15 Warnings and Precautions Area where it is generally suggested to stop the engine or a vehicle Traffic Safety Please observe the relevant regulation of the area or country where you are Do not use your wireless data card while driving to avoid traffic accident Secure the wireless data card on its holder Do not place the wireless data card on the seat or other places where it can get loose in a sudden stop or collision Use the wireless data card after the vehicle stops at a safety place Do not place the wireless data card over the air bag or in the air bag outspread area Otherwise the wireless data card may hurt you owing to the strong force when the air bag inflates Observe the rules and regulations of airline companies On or nearby a plane disconnect the wireless data card from your PC and turn off the PC In areas where it is prohibited to use wireless device do not use the wireless data card Otherwise the wireless signal of the wireless data card can disturb the plane control signals Disconnect the wireless data card from your PC and turn off the PC before boarding an aircraft Storage Enviro
50. nment Do not place magnetic storage media such as magnetic cards and floppy disks near the wireless data card Radiation from the wireless data card may erase the information stored on them Do not put your wireless data card in containers with strong magnetic field such as an induction cooker and a microwave oven Otherwise circuit failure fire or explosion can be caused Do not leave your wireless data card in a very hot or cold place Otherwise malfunction of the products fire or explosion can be caused If your PC is equipped with earphones do not place sharp metal objects such as pins near the earphones The earphones may attract these objects and hurt you when you are using the wireless data card Do not put your wireless data card in the pocket on the back side of trousers or a skirt to avoid wireless data card damage while seating anv i 15 Warnings and Precautions Children Safety e Put your wireless data card in places beyond the reach of children Do not allow children to use the wireless data card without guidance Do not allow children to touch the small fittings Otherwise suffocation or gullet jam can be caused if children swallow the small fittings Operating Environment e The wireless data card is not water resistant Keep it dry Protect the wireless data card from water or vapor Do not touch the wireless data card with a wet hand Otherwise short circuit and malfunction of the product or electric shock
51. nother incoming call is automatically forwarded to your pre set phone number No reply When your mobile phone is on but no one 58 TIE answers calls the incoming calls are automatically forwarded to your pre set phone number 12 Settings and Information Query Parameter Description Not reachable In such cases when your mobile phone is off there is no SIM USIM card and wireless links are congested or go beyond coverage area the incoming calls are automatically forwarded to your pre set phone number All condition call When an incoming call meets any one of the forwarding conditions Mobile busy Not reachable and No reply it is automatically forwarded to your pre set phone number All call forwarding Any incoming call is automatically forwarded to your pre set phone number Note e Wait time is valid only in call forwarding on no reply Under the General tab page click Default to restore all the default settings in the General tab page not including Advanced settings Network Settings You can select the network searching mode and connection type Network settings include the following operations Select Connection Types You can select different network connection types to access the networks provided by carriers 1 Click e to display the Setting interface 2 Select the Network tab page to display the Network dialog box 3 In the Choose Connection Type frame select a type and a band 4 C
52. number in SIM USIM card correspond to the name and mobile phone in the Contact Detail dialog box Oh ve 10 Phone Book Management Delete Contacts You can delete the information of unwanted contacts 1 Click E to display the Phone Book interface 2 Select the single or multiple contact records 3 Click X under the list box and the Prompt dialog box is displayed 4 Click OK to delete the contacts information Note You can press and hold Shift or Ctrl and then click the contact records to select multiple contact records Press Ctrl A to select all the contacts in a group Search for Contacts You can search for contact information by group 1 Click E to display the Phone Book interface 2 Select a group 3 Enter the similar information of contact name in the Search box Note The list box automatically updates according to your entered content and displays the most matching contact information in the current group If there is no matching contact no record is displayed in the list box Show SIM USIM Card You can display the SIM USIM card in phone book to facilitate the management of the phone book information pve EI 10 Phone Book Management 1 Click E to display the Phone Book interface 2 Right click the group tree and select Show SIM USIM in the shortcut menu Note If reading SIM USIM card fails the SIM USIM card group cannot be displayed Hide SIM USIM Card You can hide a SIM USIM card
53. ormant state of your laptop The system settings include the following operations Set Startup Modes You can set the startup mode of the MTN F stLink Data Card that is setting the MTN F stLink Data Card to start along with Windows or not and setting the interface to be minimized automatically during startup 1 Click e to display the Setting interface 2 Select the System tab page to display the System dialog box 3 Select whether to start the MTN F stLink Data Card along with Windows Select the Launch data card on windows start up checkbox the MTN F stLink Data Card is started along with Windows e Deselect the Launch data card on windows start up checkbox you need to start the MTN F stLink Data Card manually 4 Select whether to minimize the interface of the MTN F stLink Data Card after startup e Select the Start main window minimized checkbox the interface of the MTN F stLink Data Card is automatically minimized after startup Deselect the Start main window minimized checkbox the interface of the MTN F stLink Data Card is automatically displayed after startup 5 Click Apply or OK Set Standby or Hibernate Support After the startup of the MTN F stLink Data Card your laptop is prohibited to automatically switch to the standby or hibernate status by default You can set P 6 12 Settings and Information Query to allow your laptop to switch to the standby or hibernate status and disconnect from networks 1 C
54. ox is displayed in the upper left corner of you laptop screen When there is an incoming call after you set the visual alerts the Pr icon in the System Tray of your laptop screen flashes and the Prompt dialog box is displayed in the lower right corner of your laptop screen You can click Answer to answer a call quickly Adjust Volume and Set Mute After inserting your earphone into the earphone jack on the Data Card you can adjust the volume of earphone or set the microphone to mute 1 Click e to display the Call interface Drag in the frame E to adjust the volume of earphone Drag rightwards to increase the volume Drag leftwards to decrease the volume N P a 8 Voice Services 3 During a conversation you can e Click MJ to mute the microphone e Click to resume the conversation 22 TIE Message Services MTN F stLink Data Card supports the message services similar to mobile phone and has advantages such as large storage capacity and easy manageability You can send and receive messages save phone numbers to Phone Book make calls and import messages from SIM USIM cards to your laptop You can also perform operations such as message alert setting and advanced message setting Write Messages You can create messages in the write interface After creating a message you can send it or save it in Draft Click to display the Message interface 2 Select ia Write tab page 3 Click ia and sel
55. ptop card slot uses laptop battery Operating 10 C 55 C temperature Storage 20 C 70 C temperature anv 1 4 FAQ on MTN F stLink Data Card How to Judge Whether the MTN F stLink Data Card has been Installed Correctly After installing the MTN F stLink Data Card two devices are displayed in the device management namely the HUAWEI Mobile Connect 3G Modem the HUAWEI Mobile Conncet 3G Application Interface and the HUAWEI MOBILE Connect 3G PC UI Interface Check whether these two devices are installed correctly at first If a yellow exclamatory mark or other signs appear in front of the devices it means that the MTN F stLink Data Card has not been installed correctly and you must retry After the MTN F stLink Data Card Software is installed the MTN F stLink Data Card Always Prompts Data Card not Exit Why You have probably inserted the Data Card before the completion of installing the MTN F stLink Data Card Pull out the Data Card and insert it after the installation of the MTN F stLink Data Card is completed Then install the MTN F stLink Data Card hardware driver by following the guide for hardware installation What Shall I Do if cannot Access the Internet 1 Check whether you have activated the wireless online service at first You can ask the local network carrier on how to activate it 2 Ifyou affirm that the wireless online service has been activated refer to the section of Internet Ser
56. rd would cease to operate If this happens contact your card carrier e When you failed to enter the valid PIN or the PUK you can click Cancel to cancel the validation operation In this case you can not use the related functions of SIM USIM card For example accessing the Internet making and answering calls sending and receiving messages and reading messages in SIM USIM card e After the SIM USIM card is locked you still can make emergency call The PIN and the PUK are provided by your SIM USIM card carrier For information about how to modify enable or disable the PIN refer to PIN Management on page 64 6 Descriptions of the MTN F stLink Data Card GUI Introduction to the Main Screen Interface Overview The interface displayed after the MTN F stLink Data Card starts is as follows Status Display Area MIN Festtink oac OO 3 Ya MTN cD Connection Information Connected Transfer Rate Duration 00 00 00 Send Current j User Work Area Operation Navigation Area Connection Call Message Phone Call Setting Main Menu Book Record 10 EE 6 Descriptions of the MTN F stLink Data Card GUI The interface is divided into three parts From the top to down they are Status Display Area User Work Area and Operation Navigation Area Status Display Area The Status Display Area displays the icon of network signals the icon of unread messages and the icon of missed calls
57. rtup of the MTN F stLink Data Card Sh we 12 Settings and Information Query y 1 Click L J or right click Ja in the System Tray 2 Select PIN Operation Disable PIN Check in the shortcut menu 3 Enter the correct PIN in the Disable PIN Check dialog box 4 Click OK to disable PIN protection Note Only after you enable PIN protection can you disable the PIN protection The MTN F stLink Data Card prompts the remaining entry attempts for PIN If you enter the incorrect PIN consecutively three times the MTN F stLink Data Card locks the SIM USIM card In this case you must use PUK to unlock PIN Ifyou do not use PUK to unlock PIN after SIM USIM card is locked you can not use the related functions of SIM USIM card For example accessing the Internet making and answering calls sending and receiving messages and reading message in SIM USIM card e After the SIM USIM card is locked you still can make emergency calls PUK Unlock You can use PUK to unlock PIN and reset new PIN when SIM USIM card is locked 1 When SIM USIM card is locked start the software to display the PUK Verification dialog box 2 Enter the correct PUK and the new PIN in the PUK Verification dialog box 3 Click OK to finish unlocking the PIN The parameters and their descriptions are listed below Parameter Value range Description Current PUK 4 to 8 digits PUK of SIM USIM card New PIN 4 to 8 digits New PIN Validate PIN 4 to 8 digits
58. sages saved in Local the messages are directly deleted and removed to Trash Draft You can save the draft of messages in Draft and perform the following operations View Messages You can view the messages in Draft Click to display the Message interface Select the Draft tab page to open Draft Right click a message and select Display Preview in the shortcut menu Select a message in the list box View the message in the preview area nABWNr Note If you want to hide the preview area you can right click a message and select Hide Preview in the shortcut menu Edit Messages You can edit the messages in Draft 1 Click to display the Message interface 2 Select the Draft tab page to open Draft 3 Double click a message to display the Write interface 4 After editing the content you can perform the following operations Click Ds to send the message Click to save the message in Draft Click to clear the entered phone number and message content nwo E 9 Message Services Delete Messages You can delete the unwanted messages in Draft Click to display the Message interface Select the Draft tab page to open Draft Select one or more messages to be deleted in the list box Click X to display the Prompt dialog box Click OK to remove the messages to Trash aA UN e Clear Messages You can clear all the messages in Draft 1 Click to display the Message interface 2 Select the
59. scriptions about the contact Note e You can export the information of the new contacts to SIM USIM card The contact name can be null but it is not recommended for the sake of your management ave ED 10 Phone Book Management e All the information of contact can not be null at the same time and can not contain only spaces or symbols of word wrap e You can not create new contacts directly in the SIM USIM card View Contact Details You can view the contact information in the MTN F stLink Data Card quickly Click et to display the Phone Book interface Select a contact record in the list box There are two ways to display the Contact Detail dialog box Double click the contact record Right click the contact record and then select the Details in the shortcut menu 4 View the related information e UN Modify Contacts You can modify the contact information in the MTN F stLink Data Card quickly 1 Click E to display the Phone Book interface 2 Double click the contact record to display the Contact Detail dialog box 3 Modify the related information 4 Click OK to save the modified information Note e For details of modifying the groups of contacts in Local refer to Modify Groups You must show SIM USIM card in group tree successfully before modifying the contact information in phone book of SIM USIM card When modifying the contact information in phone book of SIM USIM card the name and phone
60. sh tab page to open Trash Click g to display the Prompt dialog box Click OK to clear all the messages in Trash permanently AAU Nel Note When you clear all the messages in Trash the messages are deleted permanently Report Ifyou activate the message report refer to Advanced Message Settings on page 56 you can receive return notifications after sending messages In Report you can perform the following operations View Messages You can view the results for sending messages in Report Click to display the Message interface 2 Select the Report tab page to open Report 3 Click Local or SIM USIM to display the message list in local or SIM USIM card 4 Double click a message record and view its specific information in the preview area under the message list Note e You can show or hide the preview area by double clicking a message When the message list in SIM USIM card is displayed you can reread the messages in SIM USIM card by pressing F5 p are 9 Message Services Delete Messages You can delete the unwanted messages in Report j v p Click to display the Message interface Select the Report tab page to open Report Click Local or SIM USIM to display the message list in local or SIM USIM card Select one or more messages in the list box Click X to display the Prompt dialog box Click OK to remove the messages to Trash Note e When you delete the messages saved in the S
61. splay alerts when a message is received checkbox to start the visual alert for messages Deselect the Display alerts when a message is received checkbox to stop the visual alert for messages Click Browse to display a dialog box Select ring files and click Open CIP 55 12 Settings and Information Query 7 You can click Play to listen to rings 8 In the setting interface click Apply or OK Note e Ifyou select the Display alerts when a message is received checkbox when there is a new message the icons g g in the Status Display Area flash Ifyou select the Display alerts when a message is received checkbox there is a Prompt dialog box in the lower right corner of your laptop screen whenever there is a new message you can click View to see the message in Inbox e Ifyou select a ring file the corresponding ring alert is played when you receive a new message e For advanced settings such as the short message server SMS center number setting refer to Advanced Message Settings e Under the General tab page click Default to restore all the default settings in the General tab page not including Advanced settings Advanced Settings You can customize and modify some advanced settings based on your requirements to enable or disable some functions The advanced settings include Advanced Message Settings You can set whether to allow others to use the SMS center for answering messages through advanced messa
62. t related carriers Primary DNS It is used to set the IP address of Domain Name Server DNS Secondary DNS When the primary DNS is unavailable the Data Card uses the alternative DNS Primary WINS Windows Internet Name Services WINS are to dynamically map the IP address to the NetBIOS name and allow users to visit resources by names For details consult related carriers Secondary WINS Modify Connections When the preferred WINS is unavailable the Data Card uses the alternative WINS You can modify network connections but you can not modify the default network connections Click e to display the Setting interface Select the Connection tab page Select a connection in the Profile Name drop down list Click Modify to modify the profile name verify users and set IP addresses Click Advanced to modify authentication protocol DNS and WINS After advanced settings click OK After connection settings click Save you can click Cancel to cancel your NDARA UN Se creation Delete Connections You can delete the settings of network connections but you can not delete the default network connections he 12 Settings and Information Query 1 Click e to display the setting interface 2 Select the Connection tab page 3 Inthe Profile Name drop down list select a connection to delete 4 Click Remove System Settings You can set the MTN F stLink Data Card startup mode and the standby d
63. ted record of dialed calls in the list box Click 2 or right click the record to select Call in the shortcut menu to display the Call interface BR U Nl 5 Click 3 to hang up the call Dial through Message Records You can make calls through message records in the following ways Dial through Inbox Click to display the Message interface Click the Inbox tab page to open Inbox Select Local or SIM USIM Local is the default selection Select the related message record in the list box Click 2 or right click the record to select Call in the shortcut menu to display the Call interface nA BWNre 6 Click 3 to hang up the call Dial through Outbox Click to display the Message interface Click the Outbox tab page to open Outbox Select Local or SIM USIM Local is the default selection Select the related message record in the list box Click B or right click the record to select Call in the shortcut menu to display the Call interface 20 TIE nA BWNre 8 Voice Services 6 Click to hang up the call Answer Calls By default a ring is played when there is an incoming call You can also select your favorite rings or visual alerts through call alerts settings 1 Click e to display the Call interface r wN 2 Click to answer an incoming call 3 Click to hang up the call Note e When there is a missed call the icons w Y flash in the Status Display Area and the Missed Call alert b
64. to shield the contact information in it 1 Click E to display the Phone Book interface 2 Right click the group tree and select Hide SIM USIM in the shortcut menu Note You can hide SIM USIM card only after you show SIM USIM card in group tree successfully Send Messages You can select one or more contacts in the phone book to send message 1 Click E to display the Phone Book interface 2 Select one or more contact records to send message in the list 3 Click ZI to display the Write interface 4 After editing the message click Dac to send it 2 TE 10 Phone Book Management Note If you click zd the MTN F stLink Data Card automatically extracts your selected mobile phone numbers and display them in the entry box behind amp Export Import Management You can export and import the contact information in phone book to facilitate the information management In phone book you can perform the following operations Export from Phone Book You can export the contact information from Local to the phone book in SIM USIM card or the csv and txt files or export the contact information from the phone book in SIM USIM card to Local Export from Local to File 1 Click et to display the Phone Book interface 2 Click Local to display the contact list in Local 3 There are two ways to export e Click ia to select Export all Contacts To File in the shortcut menu in order to export all the contacts information
65. vice to implement relevant settings Only Part of the Message is Displayed After Use the Paste Function to Edit it Why While editing the message at most 500 English characters are supported in the text If the quantity of the pasted information exceeds the limitation the exceeding part will be deleted automatically 72 TE 14 FAQ on MTN F stLink Data Card When a Message is received no Prompting Window Appears Why Because you have not set the function of Display alerts when a message is received To set the visual alert for messages proceed as follows 1 Click e to display the setting interface 2 Click the General tab page to display the General dialog box 3 Inthe Message Alerts Settings group box select the Display alerts when a message is received checkbox 4 In the setting interface click OK After the MTN F stLink Data Card Program is Started the MTN F stLink Data Card Prompts Import Message from SIM USIM Card or the like After Selecting No Still Want to Import the Message What shall Do Please proceed as follows 1 Click to display the message interface 2 Select the Inbox tab page 3 Select SIM USIM to enter the message area of SIM USIM card 4 Right click a message record and perform the following operations in the shortcut menu Select Import to import the selected message to Local Select Import All to import all the messages in SIM USIM list to Local Click

Download Pdf Manuals

Related Search

Related Contents

Installation, Start-Up and Service Instructions - HVAC-Talk  入 札 公 告 - 日本学術会議  MANUEL D`INSTALLATION ET D`UTILISATION DU  Black & Decker Cordless Saw Reciprocating Saw User's Manual  JVC 1105ASR-NF-VM Camcorder User Manual  Bouml user manual - Fedora Project Packages GIT repositories    IDEXX Cornerstone* Default and Security Settings Guide 8.3  シャワールームユニット  Palsonic HDSTB100 User's Manual  

Copyright © All rights reserved. Failed to retrieve file