1 - SAS
Contents
1. otherwise the symbols will be local to the LOGIN COM file In other words an assignment statement that uses a single equal sign creates a symbol that exists only while the LOGIN COM file is executing a The following is an example of a global symbol assignment statement Mr Smith modifies the LOGIN COM file by deleting the SHOW TIME command line and adding the following assignment statement DT SHOW TIME With this modification Mr Smith can request the current date and time during his terminal session by entering the following line DT For more information about global and local assignments and about the LOGIN COM file in general see OpenVMS User s Manual Logout Procedure When you are finished using the system enter LOGOUT at the DCL prompt The system displays a message to confirm that you have logged out Basics of the OpenVMS File System Directories Introduction to the OpenVMS Directory File Structure In the OpenVMS environment files are organized into directories A directory contains a list of all the files that are organized within that directory When you log in OpenVMS attaches your session to a directory on a default disk that is associated with your user ID This directory is called your home directory For each user ID there is only one home directory Often the home directory name is the same as the user ID The home directory can contain both files and other directories called subdir2. CTRL key and the Y key CTRL Y Command Procedures A command procedure is an OpenVMS file that contains sequences of DCL commands The OpenVMS file type for command procedures is COM The LOGIN COM file is an example of a command procedure For more information see LOGIN COM File on page 5 To save yourself time when you perform complicated or repetitive tasks you can create command procedures Creating a Command Procedure Use your favorite editor to create the file of commands For example the following series of commands might be included in a command procedure named RENAME COM PURGE RENAME 1 The first line deletes all but the latest version of all files in your default directory The second line renames all files in your current directory to version 1 Invoking a Command Procedure To invoke the RENAME COM command procedure you would enter the following command at the or system prompt RENAME The at sign indicates that you want to execute a command procedure For more information about creating and using command procedures see OpenVMS User s Manual Commonly Used DCL Commands Some of the most commonly used commands in an interactive command language are those that control your terminal session and those that manage files The following subset of commands is divided into these two categories controlling a terminal session and managing files Many of these commands are used in e
3. a list of identifiers which can be either UICs or keyword names that are assigned by the system manager Only users with matching UICs or resource identifiers can perform operations on the file The description of ACLs is beyond the scope of this document For more information see HP OpenVMS Guide to System Security
4. either temporary or permanent SAS files A SAS file is stored in a SAS library and is referred to as a member of a library Each member has a member type SAS equates some OpenVMS file types with a general set of SAS member types that it uses under all operating environments The names of these file types have the following form engine name filetype engine name is the name of the SAS engine such as SAS7B for the BASE engine and SAS7S for the sequential engine filetype is the type of file For example the sas7bdat file type is a data file that is accessed by the BASE engine Introduction to the OpenVMS Operating Environment A OpenVMS Logical Names and Logical Name Tables 13 For information about SAS engines see Chapter 6 Using SAS Engines on page 157 In addition two types of SAS temporary files exist with OpenVMS file types of SSAS7BUTL and SAS7BPUT These files appear only in the SAS Work library File Types for External Files External files can be processed by other programs and by the FILENAME function and the INCLUDE FILE and INFILE statements in the SAS DATA step For more information about external files see Chapter 7 Using External Files and Devices on page 177 SAS uses the following OpenVMS file types for external files DAT is an external file that contains data lines This is the default file type that SAS uses when it is reading and writing lines with the INFILE and FILE statements For m
5. file naming convention enables users to create filenames similar to those in the UNIX and Windows environments The ODS 5 file naming convention behaves like the Windows convention For example if a filename exists in all uppercase then any lowercase or uppercase reference to that file will resolve to uppercase Benefits of Using the ODS 5 Volume Structure Some benefits of using the ODS 5 volume structure include the following ODS 5 allows longer filenames Filenames can be up to 236 8 bit or 118 16 bit characters in length File specifications longer than 255 bytes will be abbreviated by unmodified applications ODS 5 supports more characters from the 8 bit ISO Latin 1 and the 16 bit Unicode UCS 2 character sets However a few special characters in the ISO Latin 1 character set are not allowed in OpenVMS file specifications The following characters are invalid CO control codes 0x00 to 0x1F Double quotation marks Asterisk Backslash Colon Left and right angle brackets lt gt Slash Question mark Vertical bar The remaining special characters in the ISO Latin 1 character set are valid when preceded by the circumflex which acts as an escape character Note If you use the apostrophe C in a file specification you must enclose it in double quotation marks If you enclose it in single quotation
6. passwords are also available File Protection File protection is a generalized way of controlling access to files based on the relationship of the user that is accessing the file to the file owner A typical file protection is specified as a list of user classes and their permitted operations File protection consists of four classes of users who can access a file SYSTEM refers to a user who has a system user identification code UIC or SYSPRV privilege This class is typically reserved for the system manager and operations staff OWNER refers to a user who has the same UIC as the user who created the file At most sites each user has a unique UIC so the OWNER is always the person who created the file GROUP refers to a user who has the same group number in their UIC as the creator of the file WORLD refers to any other user on the system Permitted operations are the following READ access is required to read a file For example you must have READ access to a file if you intend to browse copy or move it WRITE access is required to change the attributes of a file including its file protection as well as to modify data in the file EXECUTE access is required to execute files such as command procedures It does not apply to OpenVMS data files such as SAS data sets catalogs or external files DELETE access is required to delete or move a file A typical file protection specification might be the following
7. CHAPTER Introduction to the OpenVMS Operating Environment What Is the OpenVMS Operating Environment 4 SAS 9 2 Supported OpenVMS Platforms 4 Access to OpenVMS 4 Requirements for Accessing an OpenVMS System 4 Login Procedure 5 Files That Affect the Login Procedure 5 User Authorization File 5 LOGIN COM File 5 Logout Procedure 6 Basics of the OpenVMS File System 6 Directories 6 Introduction to the OpenVMS Directory File Structure 6 Creating Directories 7 Changing Your Default Directory 7 Files 8 OpenVMS Filenames 8 Syntax for File Specifications 8 What Is a Fully Qualified Name 8 Rules for File Specifications 8 Description of File Specification Fields 8 ODS 5 File Naming Conventions 10 Difference between the ODS 2 and ODS 5 File Naming Conventions Benefits of Using the ODS 5 Volume Structure 10 Wildcards in OpenVMS Filenames 11 The Asterisk 11 The Percent Sign 11 OpenVMS File Types 11 OpenVMS File Types Used by SAS 12 Warning about Changing File Types 12 File Types for SAS Files 12 File Types for External Files 13 OpenVMS Logical Names and Logical Name Tables 13 The OpenVMS Digital Command Language 14 Introduction to the OpenVMS Digital Command Language 14 The Command Line 14 How to Continue a Long Command on the Next Line 14 Interrupting Command Line Processing 15 Command Procedures 15 Creating a Command Procedure 15 Invoking a Command Procedure 15 Commonly Used DCL Commands 15 10 4 What Is the OpenVMS Operating Environ
8. OpenVMS User s Manual You might also want to see the following sections for information about how OpenVMS logical names are used by SAS or about how you use them in SAS programs Customizing Your SAS Session Using OpenVMS Logical Names on page 42 Assigning OpenVMS Logical Names on page 146 Assigning OpenVMS Logical Names to External Files on page 179 Commonly Used DCL Commands on page 15 14 The OpenVMS Digital Command Language A Chapter 1 The OpenVMS Digital Command Language Introduction to the OpenVMS Digital Command Language When you communicate with the OpenVMS operating environment you can use the OpenVMS Digital Command Language DCL Like other languages DCL has grammar rules and a vocabulary The vocabulary is a set of commands and the grammar rules determine how you specify the commands The Command Line A completely specified DCL command is called a command line The general form of a command line is the following command qualifier parameter qualifier dollar sign is required in all DCL command lines When you execute DCL prompt commands interactively the OpenVMS system supplies the system prompt which by default is the prompt When you enter DCL commands in a command file such as LOGIN COM you must enter the prompt in column 1 command is a DCL command that identifies the action to be performed Use OpenVMS DCL Dictionary as a general refe
9. S RWE O RWED G RE W This example permits a SYSTEM user to READ WRITE or EXECUTE the file The OWNER is permitted any operation on the file Members of the same GROUP as the user are permitted to READ or EXECUTE the file All other users are denied access to the file 18 Access Control Lists A Chapter 1 Specifying File Protection for a Process To specify file protection for the duration of your process or until you change the specification use the SET PROTECTION DEFAULT DCL command The DEFAULT parameter tells OpenVMS to apply the specification to every file that you create during your OpenVMS process except those for which you explicitly specify file protection For example the following command specifies new protection values for files that you subsequently create SET PROTECTION S RWE O RWED G RE W DEFAULT Specifying File Protection for Individual Files To specify file protection for a particular file or set of files use the SET PROTECTION command without the DEFAULT parameter For example the following SET PROTECTION command sets new protection values for the file MYDATA SAS7BDAT SET PROTECTION S RWE O RWED G RWED W RE _ MYDATA SAS7BDAT For more information about file protection see the OpenVMS User s Guide and HP OpenVMS Guide to System Security Access Control Lists Access control lists ACLs provide more specific control over who can perform operations on a file ACLs allow each file to have
10. SAS on a nonlocal device such as a PC monitor running emulation software SHOW DEFAULT SHO DEF displays the default directory and the default disk device SHOW QUEUE SHO QUE displays all queues including the batch queue SUBMIT SUBM places one or more jobs command procedures in a batch queue for processing Commands for Managing Files Use the following DCL commands to manage your files COPY COP copies one or more files to one or more specified files CREATE DIRECTORY CRE DIR creates a directory DEFINE associates a logical name with a file specification or equivalence name DELETE DEL removes access to a file The file specification must reference the version or versions EDIT lt editor gt ED lt editor gt invokes the specified OpenVMS editor to create or modify a file PRINT PR prints a file on the default system printer or on a specified device PURGE PUR deletes all versions of a specified file or files except the latest version TYPE TY displays the contents of a file Introduction to the OpenVMS Operating Environment A File Protection 17 Data Security Introduction to Data Security SAS protects data sets catalogs and external files by using the normal OpenVMS access control measures file protection and access control lists These access control measures apply equally to SAS data sets catalogs and external files SAS data set security measures such as data set READ and WRITE
11. ch it responds to your DCL commands This environment is called your OpenVMS process Certain default characteristics are associated with your process such as a default disk a directory name and resource quotas This information is taken from the user authorization file A command interpreter usually the DCL interpreter is also associated with your process After you have logged in successfully the system typically displays a dollar sign to indicate that it is ready to accept a command However a different symbol might be used at your site or you might use a menu interface In this document all examples assume that your OpenVMS system uses the symbol as the system prompt and that it uses the DCL command line interpreter Files That Affect the Login Procedure User Authorization File During the login procedure OpenVMS accesses a file called the user authorization file UAF to validate your user ID and password The UAF is maintained by your system manager and it contains a record for every person who is authorized to use the system Besides the user ID and password the UAF record for each user specifies the user s default disk and default directory Thus each time you log in your session is attached to the default disk at a location called your default or home directory The UAF also specifies the access privileges and quota limits that are associated with your user ID LOGIN COM File At some sites the system manager c
12. characters The file type can consist of up to 38 characters although most of the default file types have only 3 characters Permissible characters are the letters A through Z the numbers 0 through 9 an underscore _ a hyphen or a dollar sign You can enter OpenVMS filenames and file types in uppercase lowercase or mixed case but all characters are stored in uppercase format For more information about file specifications see OpenVMS Guide to Extended File Specifications Note The default for OpenVMS filenames is the traditional ODS 2 syntax However SAS supports the extended ODS 5 syntax on ODS 5 enabled volumes For more information see ODS 5 File Naming Conventions on page 10 a Description of File Specification Fields In many cases you can uniquely identify a file even without specifying all of the fields in a fully qualified name The following definitions give default values for fields that can be omitted from a file specification Introduction to the OpenVMS Operating Environment A Syntax for File Specifications 9 node specifies a node name in an OpenVMS network The node specification is always followed by a double colon The default value for node is your OpenVMS system node therefore include node in the fully qualified name only when you require access to a file that is located on a different node in your OpenVMS network device specifies the name of the physical or logical disk that contains the fi
13. default value for file type depends on how the file is created or used For example some DCL commands assume default file types You can assign a file type when you create a file version specifies the version number of the file Each time you modify or create and save a file OpenVMS increments the highest existing version number for that file and adds the new version to the directory Version numbers can range from 1 to 32 767 If you request a file without specifying the version number then you access the latest version of the file by default The latest version of the file is the one that has the highest version number If you specify a version number you must precede it with either a semicolon or a period Your system manager sets the maximum number of versions of a file that are saved at any given time For example if you have edited a file named DIR1 PROG DAT 1 000 times and your system is set to keep four backup versions then the directory DIR1 contains the following versions PROG DAT 1000 PROG DAT 999 PROG DAT 998 PROG DAT 997 10 ODS 5 File Naming Conventions A Chapter 1 When you edit PROG DAT the next time version 1001 PROG DAT 1001 is created and PROG DAT 997 is deleted ODS 5 File Naming Conventions Difference between the ODS 2 and ODS 5 File Naming Conventions Although the default file naming convention is ODS 2 SAS accepts the extended ODS 5 syntax on ODS 5 enabled volumes This extended
14. ectories Subdirectories can also contain files and subdirectories The terms directory and subdirectory refer to the same type of file unit The term subdirectory conveys the Introduction to the OpenVMS Operating Environment A Directories 7 relationship of one directory to another in the hierarchical structure that begins with the home directory This method of structuring files enables you to group sets of related files within directories You can organize your files however you like The following figure illustrates the directory file structure HOMEDIR Figure 1 1 Directory File Structure SUBDIR2 SUBDIRA SUBDIRB FILEA SUBDIRC JIN FILE1 FILE2 FILE3 FILE1 FILE2 FILE1 FILE2 SUBDIRD SUBDIR1 The directory that you are working in at any given time is called your default directory For example when you log in your home directory is usually your default directory Creating Directories To create a directory use the DCL CREATE DIRECTORY command Changing Your Default Directory To move from one directory to another directory in the file structure use the DCL SET DEFAULT command Each time you use the DCL SET DEFAULT command your default directory changes to the directory that you specify Be sure to specify a pathname to the target directory A full pathname follows an unbroken path from the first level directory down to the target subdirectory However a part
15. ial pathname such 8 Files A Chapter 1 as SUBDIR can also be specified Using Figure 1 1 on page 7 as an example the following command specifies the full pathname to the subdirectory SUBDIRC SET DEFAULT HOMEDIR SUBDIR2 SUBDIRC When this command executes SUBDIRC becomes the default directory If you have any doubt about your current location in the file structure use the DCL SHOW DEFAULT command to show your default directory Keeping track of your default directory helps you keep track of files For example some programs write output files to the default directory Files Files contain various types of data programming statements or program output Under OpenVMS you can create files with several editors including the EVE and EDT editors the Text Processing Utility TPU editor and the SAS text editor Regardless of which editor you use each file must have a unique name within that directory OpenVMS Filenames Syntax for File Specifications What Is a Fully Qualified Name A fully qualified name indicates how a file fits into a structure a system of directories and subdirectories that contains all the files stored under the OpenVMS system The following type of file specification is a fully qualified name node device directory filename file type version Rules for File Specifications A file specification cannot exceed 255 bytes The directory and file specification can each consist of up to 39
16. ion file type and version fields in a file specification It causes the DCL command to act on all files whose names match the fields that you include in the specification For example all of the following file specifications match CAT SAS SAS CA SAS CAT SAS A SAS CAT The asterisk often references sets of files in DCL commands such as PRINT TYPE and COPY For example the following command prints all versions of all files in directory DIR1 that have the file type SAS PRINT DIR1 SAS The Percent Sign The percent sign replaces a single character in directory file specification and file type fields in the file specification For example the following command prints all versions of every file whose name has five characters beginning with the letters PROG and whose file type is SAS PRINT PROG2 SAS In other words you can use the previous example to print files PROG1 SAS through PROG9Y SAS but not file PROG10 SAS To print all versions of every file whose name begins with the letters PROG and whose file type is SAS enter the following command PRINT PROG SAS OpenVMS File Types The file type portion of a filename often indicates the contents of the file Both OpenVMS and SAS use default file types for output files DCL commands that create files often assign default file types if you omit file type in the file specification When you assign file t
17. le The device specification is always followed by a single colon The default value for device is your current disk When you log in the default disk is the disk that is associated with your user ID Include device in the fully qualified name only when you need to access a file on another disk directory specifies the name of a directory or a sequence of directories The directory specification must be enclosed in brackets for example DIR1 DIR2 DIR3 The directories that follow the first directory in the sequence are called subdirectories In the previous example DIR2 is a subdirectory of DIR1 and DIR3 is a subdirectory of DIR2 The default value for directory is the default directory Include directory in the fully qualified name only when you need to access a file that is not in your default directory For more information about the default directory see Directories on page 6 Note You can substitute angle brackets lt gt for square brackets in directory specifications A file specification specifies the name of a particular file within the directory If the file is a SAS file the filename must also comply with SAS naming conventions For details about SAS naming conventions see SAS Language Reference Dictionary The file specification field has no default value unless you use a wildcard character file type usually describes the contents of the file The file type must be preceded by a period The
18. marks SAS will state that there is an error in the filename due to an uneven quotation mark A ODS 5 file specifications are no longer converted and stored in all uppercase ODS 5 syntax supports mixed case and lowercase file specifications ODS 5 supports deeper directory structures Directories can be up to 255 levels The naming conventions for directories follow that for filenames A directory name can be up to 236 8 bit or 118 16 bit characters in length For more information about the extended ODS 5 syntax see the OpenVMS Guide to Extended File Systems Introduction to the OpenVMS Operating Environment A OpenVMS File Types 11 Wildcards in OpenVMS Filenames OpenVMS supports two general purpose wildcard characters the asterisk and the percent sign In DCL commands you can use these wildcard characters in file specifications to operate on a group of files instead of on a specific file Note Using wildcard characters in file specifications can degrade the performance of your operating environment A For additional rules for using wildcard specifications in operations across nodes in a network see OpenVMS Networking Manual For information about using wildcards in file and directory specifications see Using Wildcard Characters in External File Specifications on page 180 The Asterisk The asterisk replaces zero or more characters in one or more of the directory file specificat
19. ment A Chapter 1 Commands for Controlling a Terminal Session 16 Commands for Managing Files 16 Data Security 17 Introduction to Data Security 17 File Protection 17 Specifying File Protection for a Process 18 Specifying File Protection for Individual Files 18 Access Control Lists 18 What Is the OpenVMS Operating Environment OpenVMS is an interactive virtual memory operating environment that runs on the HP Integrity server Like any operating environment OpenVMS is designed to manage information It accepts stores retrieves and processes many types of information such as data text programs such as SAS programs and output from programs The OpenVMS system performs all data processing functions in response to DCL commands that you issue These functions include the following managing a terminal session submitting jobs for execution storing and retrieving data files allocating resources for example disk space time and internal memory to individual jobs controlling peripheral equipment such as printers plotters and disk drives For detailed information about OpenVMS see the documentation provided by Hewlett Packard Also the operating environment provides an online Help facility that you can access by using the DCL HELP command SAS 9 2 Supported OpenVMS Platforms HP offers the OpenVMS version 8 3 operating system on AlphaServer and Integrity server platforms SAS 9 2 s
20. ore information see Default File Types on page 183 LIS is an external file that contains SAS procedure output By default the filename of the LIS file matches the filename of the SAS program file that generated the output LOG is the external file that contains the SAS log By default the filename of the LOG file matches the name of the SAS program file that generated it SAS is a SAS program file that is an external file that contains SAS statements Use this file type when you create a file that contains a SAS program This is the default file type for the FILE command and for the INCLUDE statement TLB is an OpenVMS text library SAS can access text libraries as external file aggregates Text library files typically store data or SAS programs that are related For example you might want to store all SAS programs that are associated with a particular application in one text library For more information about OpenVMS text libraries see HP OpenVMS Command Definition Librarian and Message Utilities Manual OpenVMS text libraries are also often used to store SAS macros For more information about SAS macros see Chapter 21 Macro Facility under OpenVMS on page 525 OpenVMS Logical Names and Logical Name Tables Under OpenVMS logical names are used extensively in place of part or all of a file specification or to see devices or queues For details about logical names and about logical name tables see
21. reates a login file LOGIN COM in your home directory when you are authorized to use the system This file contains DCL commands and utilities that are commonly used at your site When you log in the OpenVMS system automatically searches for the LOGIN COM file in your home directory If one exists the system executes the commands in the file before you receive the first DCL prompt often the symbol If you find that you regularly use certain DCL commands and utilities to customize your process you can avoid entering these commands every time you log in by storing them in the LOGIN COM file in your home directory 6 Logout Procedure A Chapter 1 Check with your system manager first before deleting or moving your LOGIN COM file You can create or modify the LOGIN COM file using an OpenVMS editor For example suppose that user John Smith has the following LOGIN COM file stored in his home directory SMITH Login command file for John Smith SHOW TIME Each time Mr Smith logs in the command file executes automatically and displays the current date and time Note that the prompt is generally in column 1 of each line that contains a DCL command A file containing just SHOW TIME will also work To improve readability you can insert one or more blanks after the Note If you use assignment statements in your LOGIN COM file to create symbols make sure that they are global assignments by using a double equal sign
22. rence to DCL commands and rules of grammar Some commonly used DCL commands are described in Commonly Used DCL Commands on page 15 Some DCL commands are called verbs These are commands whose names indicate the command s function qualifier is an optional keyword that modifies or expands the action of the command It is always preceded by a forward slash If a qualifier requires a value it is given in the following form qualifier value parameter is either a keyword or a file specification depending on the command that is acted on by the command For information about how to enter an OpenVMS file specification see OpenVMS Filenames on page 8 If the command requires one or more parameters then OpenVMS prompts you for them unless you include the parameter on the command line Notice in the command line syntax that both commands and parameters can be qualified How to Continue a Long Command on the Next Line If a command line does not fit on one line enter a space and a hyphen as the last element on the command line Then press the ENTER key and continue the command on the next line command _ parameter qualifier When you end a command line with a hyphen the next prompt is preceded by an underscore _ Introduction to the OpenVMS Operating Environment A Commonly Used DCL Commands 15 Interrupting Command Line Processing You can interrupt command line processing by simultaneously pressing the
23. upports the OpenVMS version 8 3 operating system for the Integrity server platform Access to OpenVMS Requirements for Accessing an OpenVMS System To access an OpenVMS system you must have an OpenVMS user name and a password In SAS documentation the user name is usually called the user ID Ask your supervisor or system manager for a user ID a password and any other information that you might need to access OpenVMS at your site For example if your system is part of a DECnet for OpenVMS network then you also need to know how to access the appropriate computer system before you begin the login procedure Introduction to the OpenVMS Operating Environment A Files That Affect the Login Procedure 5 Login Procedure The login procedure differs from site to site depending on how your system is configured When OpenVMS prompts you for your user ID type the user ID and then press the ENTER key Next the system prompts you for your password Type the password and then press ENTER OpenVMS accepts and validates the user ID and password even though you cannot see the password on the monitor Next you might see messages welcoming you to the OpenVMS system If you enter an incorrect user ID or password you must start the login procedure again The following sequence illustrates the login procedure Username user ID lt ENTER gt Password lt ENTER gt system messages When you log in OpenVMS defines the environment in whi
24. xamples throughout this documentation The common abbreviation for a command is shown in parentheses beside the fully specified command These abbreviations are the defaults if these commands or symbols have been redefined they might have a different action See your system manager if the abbreviation does not work as you expected Note You can issue any DCL command from within a SAS program by specifying the command in the SAS X statement or X command For more information see Issuing DCL Commands during a SAS Session on page 44 A 16 Commonly Used DCL Commands A Chapter 1 Commands for Controlling a Terminal Session Use the following DCL commands to control your terminal session DIRECTORY DIR displays a list of files and subdirectories in the specified directory or in the current directory if no directory or file specification is given For example the following command produces a list of files in your default directory DIR HELP activates the OpenVMS HELP facility LOGOUT LO terminates a terminal session and deletes your process SET DEFAULT SET DEF changes the default directory If you move to another disk this command also changes the default disk device For more information about the default directory see Directories on page 6 SET DISPLAY SET DISP indicates where to send the interactive display of an OpenVMS DECwindows application You need to use this command when you are running interactive
25. ypes to files you create keep in mind that either OpenVMS or SAS 12 OpenVMS File Types Used by SAS A Chapter 1 might require a certain file type depending on how a file is used The following is a list of commonly used OpenVMS file types COM is usually a DCL command file that can be executed with the DCL command or submitted for batch execution with the SUBMIT command For information about submitting a SAS job in batch mode see Batch Mode under OpenVMS on page 25 DIR is usually a directory The DCL CREATE DIRECTORY command assigns the file type DIR by default LIS is usually a file called a listing which might contain output of a SAS session LOG is usually a file called the OpenVMS log which contains batch job output or it is the log of a SAS session MAI is usually a file containing messages that were entered with the OpenVMS Personal Mail Utility MAIL For a complete list of OpenVMS file types see OpenVMS User s Manual OpenVMS File Types Used by SAS Warning about Changing File Types SAS uses unique file types to distinguish between SAS files and OpenVMS external files in a directory CAUTION Do not change these file types The file types in the following sections are an integral part of how SAS accesses files under OpenVMS Changing the file types can cause unpredictable results A File Types for SAS Files Most of the file types that SAS uses are assigned to files that are described as
Download Pdf Manuals
Related Search