Inmotion H1 electric Smart Board User Manual - e
Contents
1. 6 Charger socket 7 Chassis protecting cover 3 Product Parameters Parameters Max speed About 15km h Cruising Radius About 20km Max Climbing Angle About 15 Degrees Max Loading 120kg Length Width Height 580 200 180mm Pedal Height 30mm No loading Tyre Size 6 Inches Solid Type Weight 10kg Overspeed Protection 12km h Low Battery Protection 15 4 Safety Instructions In order to reduce the safety risk when you use or ride it please carefully operate and pay attention to the following safety precautions 1 Before use please check if the car body is complete and without any crack or looseness and if tires are normal 2 Switch on power and then check if the power of car body is sufficient and if the car can work normally without any ab normal call or warning 3 Please wear proper clothes and do not wear high heeled shoes or any sharp accessory It is suggested to wear safety protection articles when use INMOTION H4 including safety helmet gloves and leg protector to avoid the harm might be caused by improper operation 4 In case there is falling down risk please protect yourself at first instead of considering car body 5 Please select to ride on open and even road and do not ride on motor way or in crowded places 6 Please do not ride on wet or bumpy places or the ramp way with slope exceeding 15 7 Children under the age of 15 are not suggested to learn and ride independently and shall2. User Manual Of INMOTION H1 Dear users please carefully read the manual of this product before trying to use this product and pay special attention to safety instructions Please keep this manual for future refer ence Catalogue Product Instruction Product Structure Product Parameters Instructions For Use oR NNN Ls 2 3x 4 Safety Instructions 5k 6 Product Storage And Maintenance 1 Product Introduction NMOTION H1 is a kind of new short distance electric travel ool and entertainment and body building product integrating creativity entertainment and intelligence This product has time hourglass shape and is light and special It is very practicable The highly scientific self balancing technique makes you drive it immediately without learning Just like a part of your body it brings 360 free drift and let freedom extend at will You can drift as you wish at airport shops and leisure places or on any flat road The operation of INMOTION H1 is very simple When the center of body weight leans forward the car will drive forward when the center of body weight keeps upright the car will h reduce the speed till stop when center of body weight leans left the car will turn left when center of body weight leans right the car will turn right 2 Product Structure 1 Tire protecting cover 2 Foot rest 3 Status indicator lamp 4 Driver 5 Power switch LL 00
3. iliary till you separate yourself from the auxiliary and get self balance When the center of body weight leans forward the car will drive forward when the center of body weight keeps upright the car will reduce the speed till stop when center of body weight leans backward the car might accelerate the speed so please pay attention to your own safety to avoid safety risk 4 Turn After mastering stable and straight riding you can turn by controlling the left and right leaning degree of the upper part of the body It is easier to master when the turn angle is rela tively large and you only need to pay attention to the adjust ment of the center of body weight at the time of turn 5 Get off the car Please reduce speed before getting off When car speed is reduced till close to stop put left or right foot down Please not slam the breaks on to avoid any safety risk 6 Shutdown Power shall be switched off after use Please switch off power after complete stop of car body Car body can be lifted up after power is switched off 6 Product Storage And Maintenance 1 Use of battery Charging Check charge interface and ensure the charge interface is dry At first plug the output terminal of charger into the charge interface of drift car and then plug the plug of charger into 220V AC power source Please do not plug the charger into power at first to avoid the problem of no charging During charging process the indicat
4. learn and ride under the accompaniment of parents 8 It is not suggested to ride in winter in northern area with ice 9 It is not suggested to let go of both hands to ride as it is not good for timely dealing with emergency condition 10 Please do not lean forward backward or towards one side overly and do not speeding 11 INMOTION H1 can be used in light rain for a short period of time but please do not submerge in the water or use in the rain for a long time 5 Use Instructions Please correctly operate the product according to relevant instructions 1 Start Put INMOTION H1 on the ground switch on power and then power indicator lamp will be on and buzzer will give one WV beep warning tone Put both feet on foot rest and keep balance then the car can move forward ote After start do not lift up the car and make tires get off he ground otherwise buzzer will give alarm due to intelli gent protection 2 Get on the car Put one foot on one foot rest and the other foot on the other foot rest 3 Ride If you feel it is not easy to keep the balance you can use some auxiliary measures to get familiar with the balance sense at first You can use wall guardrail or people s strength to gradually get familiar with the balance sense and try to make the car move forward by leaning the body for ward When you get familiar and gradually master the bal ance you can reduce your dependency on aux
5. or lamp of charger is red After completion of charging process the indicator lamp of charger is green at this time you shall disconnect the power of charger before unplugging charger It takes about one hour from zero power till full power charg ing For your use safety it is suggested that you shall stop using the car when hearing warning or seeing the red indi cator lamp of power and charge the battery as soon as pos sible While extending the service life of battery it can also ensure the driving safety and avoid the safety risk caused by dead battery Note Original charger can be used as the charging device replacing battery but it shall be used together with converter provided by original factory Please do not useaccessory not provided by original factory to avoid any safety problem Change standby battery Lightly lay the car body on a soft plane according to battery compartment up direction Screw off screw parts of battery compartment with cross screwdriver open plastic case and then screw off screws of battery rack Unplug battery connecting line from the interface installing plug in component take off battery change the backup battery and plug battery connecting line into the interface in stall plug in component Cover the case and then tighten easy disassemble screws Battery life In case the battery has not been used for a long time it is suggested to charge the battery for once in each month
6. to keep the energy of battery 2 Battery storage and maintenance Storage It is suitable to keep the storage temperature at 10 30 Higher or lower temperature might affect the normal use of lithium battery It is suggested to store the car and battery at ventilated dry and cool place USER Thank you for purchasing the product of our company and carefully reading this user manual Hope you enjoy using our product MANUAL
Download Pdf Manuals
Related Search