Home

Tiger Digital Clocks, Timers and Counters

Contents

1. 600 N River Street Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com mee 800 295 0220 Infrared Remote Control The infrared remote control is standard with time zone displays and optional for other models It can be used to control real time displays timers and counters The remote can also be used to access and change the clock s configuration The remote control receiver must be factory installed Timer Press once to Start Press again to Stop Press again Timer Press once to Stop Press again to reset Counter D to resume Counter Press to s Press once to reset i A a increment the count d A em y Precision NM d Products Timer Press once to access Timer Press once to access k SE SE the ending time Press Up or the starting time Press Up or Dee E Down to change time Press Down to change time Press again to exit Counter Press d once to access the ending once to access the startin d 9 E CHANGE CHANGE count Press Up or Down to count Press Up or Down to SS oer ge change count Press again to again to exit Counter Press change count Press again to exit exit TIMER Real Time Mode Increment Timer Press to start timer CONTROL the time Holding the button Counter Press to dec
2. BR o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions mode 16 47 U S Canada radio channel scan all channels in receive mode 48 55 Australia New Zealand scan all channels in receive mode 56 87 U S Canada no channel scanning includes 40 offset 88 95 Australia New Zealand no channel scanning includes 40 offset Transmit and Repeat mode always uses fixed channel assignments Repeaters use both odd and even channels therefore it is recommended to configure Mode 37 68 to use only even channel numbers in case multiple repeaters are deployed Setting this mode to a channel less than 60 will cause the radio to scan all available channels while in receive mode Mode 37 67 1 or Mode 37 67 2 BRG data radios incorporate DES data encryption developed for the U S Government This two key secure communications method prevents changing or reading communications data and other interference This secure communications method provides accurate secure and reliable communications Data Radio Group Number 0 99 data radio group number 5 default Configure Mode 37 68 before changing this value This value is similar to a network password All radios that you want to communicate with must have the same group number Furthermore all radio must use the same DES encryption password The encryption password is set at the factory and cannot be changed There may
3. 0 disabled default 1 enabled 2 digit time all relays 2 enabled 1 digit time relays 0 9 O all relays Requires Tiger processor version 4 31 or later Requires BRG1751v3 or later UHF decoder receiver Mode 37 56 must be greater than 0 This feature allows the Tiger digital secondary clocks to perform a countdown when the alarm sounds This mode once enabled allows the wireless master clock to send alarm commands 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BR o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions that cause a Tiger digital secondary clock to set the timer reset minutes and activate the timer control function This mode must be enabled in both the wireless master clock and the Tiger digital secondary clocks Mega clocks are enabled by default The Tiger secondary clock must have Mode 37 61 1 9 and be configured to have the timer control button switch to timer mode countdown and return to real time Wireless receivers must be BRG1750v3 1 BRG1751v3 or later Mode 37 56 must be greater than 0 to enable Requires Tiger processor version 4 29 or later From the Windows control program Go to Setup gt Communications Check Enable Wireless Digital Clock Countdown Go to the drop down box titled Duration of Individual Alarms Click on a selection that includes all
4. iin eee First Menu Level Mode Number Second Menu Level Mode Description and Instructions 0 disable auto mode and format switching from RS422 default 1 enable auto mode switch Serial Sync Transmission 0 disable serial sync output default 1 enable serial sync output with variable delay in real time only Timer and Counter modes transmit serial data at full speed This also applies to power line sync 2 enable serial sync output with variable delay in real time timer and counter modes This also applies to power line sync 3 enable serial sync output with variable delay in real time No sync is transmitted while in timer and counter mode 4 transmit time sync out SR ST port only to control radio paging transmitter If Mode 37 59 0 then 35 byte data will also be sent out the GPS port once per minute In this case also set Mode 32 15 7 5 transmit time sync out GPS port only to control radio paging transmitter If Mode 37 59 1 then 35 byte data will also be sent out the SR ST port once per minute In this case also set Mode 32 15 7 Enable this function if the clock is to be a master clock not connected to other time sources Disable sync output if clock is a slave or it is receiving time from a PC Enable if clock is to server as a master clock sending time to other clocks or a PC Wireless Master Clock Configuration Examples 1 Receive Ethernet on SR ST transmit time on GPS port 32 12 5 32 15 7
5. 3 converts the displayed time to seconds after midnight can be used in real time Use with display modes 40 and 66 Daylight Saving Active Indication 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions 0 default disabled l enabled The right most decimal point will illuminate when this flag is active and a specific zone is displaying daylight savings time Display modes 2 and 3 are used to display the daylight savings indicator Auto restart Timer 0 default disabled l enabled This parameter will cause the timer to reset and restart when the End time is reached and the alarm has timed out finished sounding The Timer Control button must be configured to enable this feature To enable Timer Control Set mode 32 4 and 32 5 as required Set Mode 13 1 to stop at the ending time Timer Start Button 0 with the timer stopped pressing the start button starts the timer when the button is released Pressing the start button again pauses the timer Pressing the start button once more resumes timing 1 With the timer stopped pressing the start button starts timer as soon as the button is pressed Pressing the start button again has no effect Pressing the Stop Reset button will pause the timer 2 99 With the timer stopped pressing t
6. 1 default This mode is designed to cancel the delay introduced by the NMEA 4800 baud serial communications mode and other delays If 45 18 gt 0 then the NMEA time received will be advanced one second plus the a number of milliseconds specified by Mode 45 18 For example the default setting will advance the NMEA time received by 1 001 seconds If 45 18 lt 0 then the NMEA time received will be advanced two seconds plus the positive number of milliseconds specified by Mode 45 18 For example if Mode 45 18 500 then NMEA time received will be advanced by 2 500 seconds Panic Alarm Timeout Value formerly Mode 39 O default This value is used in conjunction with Mode 37 2 Alarm Panic Button When timeout seconds are greater than zero the panic alarm will turnoff when the timeout time is reached This mode was previously assigned to Mode 39 but was moved to Mode 45 19 on 2 14 05 Tiger Version 3 41 Custom Daylight Saving Rule Starting Value for Mode 24 n 10 Default 327 Second Sunday in March Values for rule driven custom daylight saving time for Mode 24 n 10 The format is MMRD where MM month 1 12 R instance of the select day of the week 1 5 5 last instance D day of the week 1 7 where 1 Monday and 7 Sunday For example 357 represents the last Sunday in March or 1117 represents the First Sunday in November If the value gt 2000 then the right two digits represent the day of the month The left two digi
7. 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 117 dB o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions negative Enter West longitudes as negative values Beginning with software version 2 92 the fraction is entered as four digits For example 1230 is entered as 1230 Enter 25 as 2500 Prior versions use a two digit fraction Mode 21 n must be set to display Sunrise Sunset times for a time other than UTC See also Modes 32 35 32 36 and Display Modes 56 57 58 and 59 See also Mode 34 to activate an alarm at the Sunrise Sunset time Local Sidereal Time Offset 10 Thousandths of a Degree This parameter is also used to define the Longitude offset for Local Sidereal Time in fractional decimal degrees To enter an offset to UTC enter a negative number for fractional decimal degrees West and a positive number for fractional decimal degrees East The fractional portion of the offset may extend into the ten thousandths When entering negative numbers a minus sign will appear until four digits are used At that time a light will appear in the upper left corner of the display to indicate the value is negative See also Modes 62 and 63 See also Mode 72 to enable disable Sidereal Time Sidereal Time Example 97 degrees 37 minutes 45 seconds West Convert to decimal 97 37 60 45 3600 then make it negative for Western Longitud
8. CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS YOUR OPENING OF THE SOFTWARE PACKET WILL INDICATE YOUR ACCEPTANCE IF YOU DO NOT AGREE WITH THESE TERMS AND CONDITIONS YOU SHOULD PROMPTLY RETURN THE COMPLETE UNOPENED PACKAGE THE SOFTWARE INCLUDING ITS CODE DOCUMENTATION APPEARANCE STRUCTURE AND ORGANIZATION IS A PROPRIETARY PRODUCT OF BRG PRECISION PRODUCTS INC AND IS PROTECTED BY COPYRIGHT AND OTHER LAWS TITLE TO THE SOFTWARE OR ANY COPY MODIFICATION OR MERGED PORTION OF THE SOFTWARE SHALL AT ALL TIMES REMAIN WITH BRG PRECISION PRODUCTS INC License Agreement BRG Precision Products Inc grants the purchaser a non exclusive nontransferable license to use the BRG Control Program the Software on any number of computers owned and or operated by the purchaser You may install the software onto the hard disks of computers or make it accessible to any number of computers owned and or operated by the purchaser on a network and you may make a copy of the software disk s for backup purposes These copies must include the BRG Precision Products Inc copyright notice The software including its graphics displays are copyrighted You may not rent distribute or transfer copies of the software or documentation to others outside your organization modify disassemble decompile or translate the software or documentation make any copies of software modules for use with other programs or use the software on terminals of a network on
9. Count up from zero using a four digit display Pressing the Up button or momentarily closing the up line will increment the count Pressing the timer control button or momentarily closing the code blue line will decrement the count Pressing the Down button or momentarily closing the down line will reset the count 1 Mode 14 4 Set to up counter Display active production goal and actual count This example uses 2 four digit displays Both counters will start at zero at the beginning of the day The actual counter will increment each time a product is produced The goal counter will auto increment so that the count at the end of the day will reflect the total goal for the day The actual count is configured the same as a simple counter However the goal counter will be configured to automatically increment Pressing the Up button will pause the goal counter during lunch or other break periods When the counter is paused the letters PAUS will appear on the display In this example the goal counter will increment one count every 30 seconds Actual counter 1 Mode 14 4 Set to up counter Goal counter Mode 14 4 Set to up counter Mode 37 13 1 Increment amount in seconds default Mode 45 1 1 Amount to increment each period Mode 45 2 30 Increment every 30 seconds ae ee 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com
10. Fax 720 293 9393 sales brgproducts com www brgprecision com iin eee 1 Software reset 2 Restore factory defaults once the 2 appears release the mode button and momentarily press the Timer Control button 3 Restore customer defaults from secondary memory if previously stored once the 3 appears release the mode button and momentarily press the Timer Control button 4 Store customer defaults in secondary memory once the 4 appears release the mode button and momentarily press the Timer Control button 5 Disables wireless transmitter test mode or if wireless test disabled enter demo unlock key 6 Display zone numbers of a time zone display For wireless master clock enable transmitter test mode until clock is reset blinks display 7 Iluminate all numeric segments press up or down to cancel To force a display to use all alpha digits press and hold the Timer Control button during power up This will configure the display with 5 alpha digits allowing access to the menu First Menu Second Mode Description and Instructions Level Menu Mode Number Level 00 00 Exit Menu System to Simply press the Up button to advance the time or the Down button to decrement the 23 59 time The longer the buttons are held down the faster the time will change Pressing the Timer Control button will also exit the menu system 01 01 Day Month to Pressing the Up button advances the days and months pressing the Down button 12 31 decrements the
11. is not connected to an atomic clock and or a sync pulse is received When an atomic clock receiver is connected or a sync pulse is received this value is ignored and the pulse is transmitted Example Send a 100 ms pulse at 3 00 am over radio sync using the alarm relay Mode 6 1 Mode 16 3 00 Mode 17 00 Mode 32 33 1 Mode 37 3 1 Mode 45 8 100 Starting Time hours minutes This value determines the starting hours and minutes of the elapsed timer The display must be placed in 24 hour mode i e 23 1 24 otherwise zero will appear as 12 00 Starting Time seconds This value determines the starting seconds of the elapsed timer Ending Time hours minutes This value determines the optional ending hours and minutes of the elapsed timer The display must be placed in 24 hour mode i e 23 1 24 otherwise zero will appear as 12 00 Ending Time seconds This value determines the optional ending seconds of the elapsed timer Beginning Count This value determines the starting count for the event counter Ending Count This value determines the optional ending count for the event counter Stop Counter or Elapsed Timer Auto 0 don t stop at the End l stop at End Default 2 don t stop at the End time but turn on the red signal light in a signal light display The elapsed time or count may either continue when the End value is reached or stop at the End value If the Start and End times are the same and
12. Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BiG eg EEN Alarm Configuration Each digital clock has 99 total alarm settings that can be configured to activate a relay alert horn or other device at various times and days The duration of any single alarm can range from 1 to 99 seconds Additionally each alarm setting may be pulsed from 1 to 99 times per second For example a start lunch break alert horn could sound a constant tone for three seconds beginning at 12 00 noon Monday through Friday The end of lunch tone could be pulsed twice per second for three seconds of duration The PC Control program for Windows is highly recommended for controlling alarm functions This software is available for both two wire serial USB and Ethernet communications configurations The clock must be ordered with one of these communications protocols in order to use the PC Control program Use the Alarm Configuration Worksheet on the following page to organize your alarm settings While your clock has been configured to your specifications you may change this configuration at any time If your clock has serial sync wires connect the red and black wires to the red and black wires of a master clock Slave clocks receive sync pulses while master clocks send pulses every second If your clock uses radio synchronization a light will display to the lower right of the minutes when the clock is in sync
13. Set Mode 32 12 1 to enable transmissions once per second Mode 37 67 3 configures the master clock to send time data out the GPS port to the CEL or 900 MHz transmitter For 900 MHz systems to determine the channel to assign each analog clock add 15 to the desired zone number For example zone 1 will use channel 16 1 15 16 Configure each analog clock with the desired channel Disable channel scanning Assign all analog clocks the same group number and encryption key Example for 900 MHz systems To configure 5 analog time zone clocks with the transmitter receiving time from Ethernet NTP and the radio connected to the GPS port Mode 18 5 configure for 5 display zones Mode 21 1 zone 1 offset Mode 21 2 zone 2 offset Mode 21 3 zone 3 offset Mode 21 4 zone 4 offset Mode 21 5 zone 5 offset Mode 24 1 zone 1 DST rule 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com ifn eee First Menu Level Mode Number Second Menu Level Mode Description and Instructions Mode 24 2 zone 2 DST rule Mode 24 3 zone 3 DST rule Mode 24 4 zone 4 DST rule Mode 24 5 zone 5 DST rule Mode 32 8 0 use time zone offsets for received time Mode 32 12 1 enable transmission once per second Mode 32 15 7 enable the GPS port for the radio transmission Mode 37 67 3 transmit time on the GPS port to the radio Mode 32 70 2 enable the GPS
14. also 21 1 n 24 1 n 32 8 0 Receive Motorola GPS on GPS port transmit time on SR ST port 32 12 4 32 15 2 also 21 1 n 24 1 n 32 8 0 Receive NMEA083 GPS on GPS port transmit time on SR ST port 32 12 4 32 15 11 also 21 1 n 24 1 n 32 8 0 Receive CDMA GPS on GPS port transmit time on SR ST port 32 12 4 32 15 10 Receive IRIG B on GPS port transmit time on SR ST port 32 12 4 32 15 4 also 21 1 n 24 1 n 32 8 0 See also Mode 45 9 to alter the sync transmission rate Alarm Pulsing 0 disable alarm output pulsing for all alarm settings default 1 94 alarm pulses per second for all alarm settings If this setting is 0 when the alarm sounds it will remain on for the entire selected alarm duration period A value of 1 94 determines the number of times the alarm is pulsed per second For example if the alarm duration is set for three seconds and Mode 32 13 is set for 2 pulses per second the alarm will turn on and off six times throughout the three second alarm duration period See also Mode 34 for individual alarm pulsing override and mode 26 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions Auto Brightness Option 0 disable optional auto brightness control 1 99 optional auto brightness offset to all display
15. e The NIC must have a valid DHCP or fixed IP address e The NIC must be in the SNTP operating mode e If you are using fixed IP addressing the clock must have the correct gateway address to access the Internet The gateway is the first router that the clock must go through to access other networks or the Internet e Your network firewall must allow the clock to access the Internet through port 123 e The clock must have the default NTP timer server IP address loaded into the NIC e If using named SNTP servers be sure a valid DNS address is provided or use only numeric SNTP server addresses If your clock is not synchronizing with a local network NTP time server check the following items e The NIC must have a valid DHCP or fixed IP address e The NIC must be in the SNTP operating mode e If you are using fixed IP addressing the NIC must have the correct gateway if the server is on another network The gateway is the first router that the clock must go through to access other networks e The correct NTP timer server IP address must be loaded into the NIC e If using named SNTP servers be sure a valid DNS address is provided or use only numeric SNTP server addresses Technical Support For BRG Technical Support call 1 316 788 2000 8am Spm U S Central time or email www support brightclock com 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision co
16. 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com no NEE Improving Clock Accuracy All BRG clocks use precision quartz crystal timing circuits However while more accurate than resonators quartz crystals are susceptible to timing fluctuations due to temperature changes aging and other factors Thus nearly all clocks based on quartz crystals will eventually run fast or slow To improve the overall time accuracy all BRG clocks include a time correction register Mode 4 By measuring the amount of timing skew from the time standard clock accuracy can be increased The clock can be slowed down or speeded up to account for variations due to temperature aging and other factors To calibrate the clock you will need access to the U S time standard This can be found on the Web at http www time gov or by calling BRG Precision products at 316 788 2000 Setting the clock The up and down buttons are used to decrease or advance the time The longer the buttons are held down the faster the time moves Each time the minutes are advanced the seconds are set to zero Therefore set your clock to the exact time by waiting until the top of the minute The moment the time standard increments to the next minute advance your clock also Calibrating the clock One month after setting the clock check the clock for accuracy against the time standard First set the time to display minutes and seconds For
17. 37 13 and 32 50 68 xssx gt XXXX gt xxxx Seconds for used with alternating displays See also Modes 37 41 37 42 37 43 37 13 and 32 50 69 xmn alpha day of the month use with display mode 34 Set Modes 32 29 4 32 69 1 70 9999 Elapsed weeks 0 9999 71 yyyy Year Special year for use in the first zone 87 nnnn Current day count of the pay enforcement timer Time Zone Offset This value determines the number of hours to add or subtract from Universal Coordinated Time This parameter is usually only used with time zone clocks or clocks containing an atomic clock receiver See also Mode 33 for forced half hour and one hour offsets For accurate time zone information see http www timeanddate com The clock s internal time base is Universal Coordinated Time UTC GMT or ZULU A time zone offset may be applied to each time source Time Source This mode selects the time source 1 24 for each four digit display 1 24 Four and eight digits displays are typically set to the first time source by default default 1 12 or 24 hour display format This mode selects either 12 or 24 hour display format for each four digit display when displaying real time default 12 See Mode 48 for 12 24 hour format selection while in timer counter mode Daylight Standard Time This mode selects the rules to use when automatically switching between Daylight and Standard time The rules for various locations are
18. Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com FT i EEN Up Down Elapsed Timer Configuration The BRG Tiger firmware supports short medium and long duration timer operations Short duration typically means less than 24 hours This mode is used for short timing sequences and does not recover from a power loss Medium duration timers may run as long as 9 999 days but does not recover from a power loss Long duration timers may cover many decades and does recover from a power loss The Up button starts pauses and restarts the elapsed timer The Down button pauses and resets the timer Press the Up button to start the timer Pressing the Up button again will pause the timer Pressing the Up button a third time will start the time from the paused position Pressing the Down button once will pause the timer Pressing the Down button again will reset the timer If your clock has serial sync wires connect the red and black wires to the red and black wires of a master clock Slave clocks receive sync pulses while master clocks send pulses ten times per second Slave clocks may be used for multiple displays of the same timer If your clock is equipped with the optional infrared remote control it is shipped attached to the back of the clock Reference the infrared remote instruction section found later in this manual The internal battery will maintain the time for about ten years All opera
19. Dummy Flash sector size Dummy Number of Flash sectors Dummy Size of Flash memory in bytes Dummy Number of Flash sectors for User Data Dummy Size of Flash memory in bytes for User Data lt 40 gt Dummy O system waits during Flash operations 1 system continues to run during Flash operations ACT_TASK TASK_PRIO lt 49 gt SUM_PRIO lt 50 gt NR_OF_TASKS lt 51 gt NR_ACT_TASKS TIGER_MODE lt 67 gt MODE TIGER_VERS lt 68 gt TIGER_MODULE lt 48 gt Dummy Current task number Taskname Current task priority of this task Dummy Sum total of all task priorities Dummy Number of tasks in program lt 52 gt Dummy Tiger Mode 0 RUN Mode1 PC Mode Debug Dummy Number of active tasks Dummy Tiger Version lt 69 gt Dummy Tiger module Type 0 module family A Sunrise Sunset Latitude _ Integer If the Latitude integer is negative then the Latitude decimal fraction must also be negative Enter South latitudes as negative values Mode 21 x must be set to display Sunrise Sunset times for a time other than UTC See also Modes 32 35 32 36 and Display Modes 56 57 58 and 59 See also Mode 34 to activate an alarm at the 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 116 dB o FNO o First Menu Level Mode Number Second Menu Level 180 to 180 Mode Description and Instructions Sunrise Sunset time Sunrise Sunset_Latitude De
20. II 8 9 license to Use Flame 8 9 Menu Menu lockout timer Mode 22 40 61 Mode Operating Mode 14 44 Moving Message Communication operating modes Mode 32 44 60 Numeric display fields Mode 2713 51 Offset Forced Mode 273 66 Panic alarm button Mode 2123 68 PC clock timer counter command structure 143 PC Control Address clock or zone Mode 273 A7 60 Repeat commands out selected port Mode32 47 61 Power Line Communications Operating Modes Mode 32 20 oo eects 56 Power Line Communications Overview 121 Second add to time received Mode 32 38 59 Power over Ethernet POE ccccsceesssseeeeesees 128 Radio synchronization Overview e 129 130 Real time clock chip installed Mode 32 25 57 Receivers Time Sync Configuration Mode 32 1554 Relay dual output Mode 32 26 00 57 Restore User Configuration Mode 50 5 108 Save User Configuration Mode 50 6 108 Serial communications protocol 0 eee 143 Serial interface adapter c ceccesceeneeees 140 141 Serial wire synchronization overview 132 133 Set timer control function Mode 32 4 0000 51 Sidereal Time Enable Disable sidereal time Mode 72 117 Time offset 10 mil dgree Mode 62 eee 116 Time offset 10 thou degree Mode 64 116 Time offset degrees Mode Gi 116 Software License 8 9 Software reset
21. Local Area Connection Right click on the network icon at the bottom of the screen Click on Open Network Connections or go to Start gt Control Panel gt Network Connections If Local Area Connection is not the only enabled connection right click on the other connections and click on disable Network Interface Configuration Web Interface The main page displays a variety of general information about the configuration and activity of the Ethernet interface Clock Configuration TCP IP Configuration SNTP Servers a e fS e s Security Modify the us Upload Firmware Upload a ni Configure clock specific settings Configure the TCP IP settings for the network interface er login password firmware image to the device Reboot Reboot the device Status Current Time GMT 12 26 2010 19 07 Ethernet MAC Address 00 40 9D 45 A1 08 IPv4 Addresses 192 168 42 103 169 254 62 151 Auto IP IPv6 Addresses FE8O 240 90FF FE45 4108 Up Time 3 days 3 hours 22 minutes 47 seconds MAC Address 00 40 9D 45 A1 08 Firmware Version v4 01 User Name and Password The menu in the left column allows selecting several sections of the interface A user name and password is required to enter any section other than the main page The default user name is user The default password is password The user name and password should be changed after installation Store the user name and password in a safe location for later ref
22. Mode 54 n I AACCZZMMDDYYYYXXXXXXXXXXXKXXXKXXXXF CC 47 ZZ 1 20 alarm schedule season MM month DD day YYYY year 600 N River Street Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com 147 am 300 295 0220 Alarm Duration Mode 5 I AACCZZXXXXXXXXXXXXXXXXXXXXXXXXX CC 48 ZZ 0 50 alarm duration in seconds Alarm Toggle Mode 49 I AACCZZXXXXXXXXXXXXXXXXXXXXXXXXX CC 49 ZZ 0 2 O disables 1 Alarm On 2 Alarm Off Periodic Alarm Frequency in Seconds Mode 45 13 AACCNNNNNNNNNXXXXXXXXXXXXXXXXXXXF CG 72 N 0 99999999 frequency in seconds Alarm Multi mode Macro AACCLLSSMMHHCCDDSSTTPPRRZZZXXXXX CC 73 LL alarm position number 1 99 SS alarm seconds MM alarm minutes HH alarm hours CC alarm relay channel DD alarm day of the week code SS alarm schedule TT alarm toggle PP alarm individual pulse time pulses per second RR individual alarm duration in seconds ZZZ alternate three digit alarm day of week code if greater than zero this code will be used in place of the two digit code DD In addition to day of the week combination codes Mode 29 also accepts any day combination A value greater than 128 is treated as a binary command Days of the week are assigned the following binary numbers Mon 1 Tue 2 Wed 4 Thu 8 Fri 16 Sat 32 and Sun 64 Any combination of days may be selected by adding their assigned nu
23. Mode Description and Instructions month and day of an alarm date range If Mode 53 has the same date the alarm will activate only one day If the Year in Mode 55 equals 2000 then the alarm will activate every year with the month day range specified The ending date must be occur after the beginning date See also Mode 38 to force an alarm schedule active Alarm group 1 is different than the other 19 alarm groups If no date range is active then group is 1 the default This feature reduces the number of alarm entries required in some schedule situations Mode 27 set the hours and minutes Mode 29 sets the day of the week required Alarm Schedule Date Range Beginning Year 2050 default Set Mode 37 1 0 to enable This mode is used to set the beginning year of an alarm date range If the Year in Mode 55 equals 2000 then the alarm will activate every year with the month day range specified The ending date must be occur after the beginning date See also Mode 38 to force an alarm schedule active Alarm group 1 is different than the other 19 alarm groups If no date range is active then group is 1 the default This feature reduces the number of alarm entries required in some schedule situations Mode 27 set the hours and minutes Mode 29 sets the day of the week required Alarm Schedule Date Range Ending Year 2050 default Set Mode 37 1 0 to enable This mode is used to set the ending year of an alarm date range If the Year in M
24. O disable daylight time 1 See Mode 24 n 14 for version 3 64 or later U S old rule Canada Bermuda default in version 3 63 or older For the new U S rule use Display Mode 10 and set Mode 45 20 327 and Mode 45 21 1117 See Modes 45 20 45 21 45 22 and 45 23 2 UK Ireland Scotland 3 Australia 4 Argentina 5 Israel 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com iin eee N First Menu Level Mode Number Mode Description and Instructions 6 Brazil 7 Egypt 8 Iran 9 New Zealand 10 user defined see also Mode 52 and Mode 45 20 Mode 45 21 11 user defined see also Mode 52 and Mode 45 22 Mode 45 23 12 Western Europe 13 Reserved 14 New and old U S rule default version 3 64 or later This will cause the Tiger to use the old U S rule during 2006 In 2007 and later the Tiger will automatically begin using the new US rule 20 user defined see also Mode 52 and Mode 45 30 Mode 45 31 ver 4 64 21 user defined see also Mode 52 and Mode 45 32 Mode 45 33 ver 4 64 22 user defined see also Mode 52 and Mode 45 34 Mode 45 35 ver 4 64 23 user defined see also Mode 52 and Mode 45 36 Mode 45 37 ver 4 64 24 user defined see also Mode 52 and Mode 45 38 Mode 45 39 ver 4 64 Intensity Individual Display This value determines the intensity in 15 steps for 1 through 24 four digit displays This mode select
25. Secondary ONS fields are empty Apply Restore Defaults Copyright 2010 BRG Precision Server Name enter the numeric IP addresses or alphanumeric named addresses of the desired network time servers The default configuration includes ten government time server addresses Once the clock has an IP address it will attempt to contact the first SNTP time server in the list If the network firewall prevents the clock from reaching the Internet change the SNTP addresses listed to only local network SNTP time servers Remove any server addresses outside the local network Security Main Page R D TCP IP Configuration SNTP Servers security Enter New Password Upload Firmware Reboot Confirm New Password Apply Copyright 2010 ERG Precision Change the password as needed Be sure to store in a safe location for future reference Click on the Apply button to invoke the change Reboot Main Page I figuration TCP IP Configuration SNTP Servers Security Upload Firmware Reboot Reboot Click Reboot to reboot this device Reboot Copyright 2010 BRG Precision 600 N River Street e Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com 127 800 295 0220 JERG Click on the Reboot button to restart the network interface Time Synchronization Problems If your clock is not synchronizing with an Internet SNTP time server check the following items
26. Send command to switch Midland UHF transmitter to channel B 10 Send command to enable UHF wireless speakers for 5 minutes 11 27 enable MM message file 11 file 1 or A 27 file 16 or P 99 Enable message board internal sounders for 3 seconds Ver W4 76 or later This mode has 99 positions one for each corresponding alarm setting Once the alarm output is turned on it will remain on until it is turned off See also modes 27 28 29 and Mode 32 61 Morse Code Station Identification Mode 49 90 through Mode 49 99 is used to hold the ASCII FCC station identification string The wireless control program is typically used to enter this string Restore Factory Defaults This special diagnostic mode is for factory use only This mode is used restore the factory defaults Software Reset This special diagnostic mode is for factory use only This mode is used to reset the software without removing power from the display Iluminate all Segments This special diagnostic mode is for factory use only This mode is used to illuminate all LED segments of all displays Pressing either Up or Down buttons returns to the previous display mode Zone Number Identifier This mode is used to identify the zone number of each four digit display in clocks that use multiple four digit displays 0 inactive default 1 displays the respective zone numbers of each display Once the zone number is displayed pressing either mode up or down wil
27. User Supplied Cat 5 cable to Wall Switch Clock Timer Counter Wall Switch Single Gang Box Side View Stainless Steel Switch Plate y Membrane Switch User Supplied Cat 5 Cable with Modular Connectors Ribbon Cable KR Attach stainless steel face plate to box then peel adhesive backing from membrane switch and attach to stainless steel plate PT i EEN Index Address clock Mode 2727 60 Auto increment amount Mode A3 1 99 Adjustment realtime range Mode 37 37 04 77 Auto increment rate period Mode 37 13 70 Agreement 8 9 Auto increment rate value Mode A5 2 99 Alarm Auto reset ending value Mode 37 16 0 ee 72 Active alarm schedule Mode 37 1 n os 67 Beginning Count Mode II 44 Alarm output duration individual Mode 30 50 Blank minus sign Mode 271 20 59 Alarm pulse Mode 2113 53 Change Start End button configuration Mode 37 14 Four channel configuration Mode 209 114 71 Master Slave Operation Mode 32 16 55 Direction Control Mode 218 51 Normal Reverse output logic Mode 37 32 76 Display least four digits Mode 37 15 cee 72 Output Duration Mode 3 43 Display most significant four digits Mode 37 21 73 Panic alarm button Mode 212 68 Ending Count Mode ID 44 Panic alarm timeout value Mode 209 97 101 Goal production counter Mode 21 18 72 Pulse alarm output Mode 32 13 oo eee eee
28. When Mode 37 1 0 alarm schedules will automatically change depending on the active date range There are 20 date ranges available The Mode 38 function has changed It now determines which schedule is active for date ranges defined in Modes 53 54 55 and 56 Setting Mode 32 4 4 allows the Timer control button to switch between schedules 0 10 0 activates date range switching Press Timer Control to access Mode 37 1 Use the Up and Down buttons to change the schedule from 0 10 then press Timer Control to save and exit Panic Alarm Timeout Value See Mode 45 19 This mode was moved to Mode 45 19 on 2 14 05 Tiger Version 3 41 O default This value is used in conjunction with Mode 37 2 Alarm Panic Button When timeout seconds are greater than zero the panic alarm will turnoff when the timeout time is reached See Mode 37 41 See Mode 37 42 See Mode 37 43 Warning alarm O disabled 1 enabled using primary output relay with warning display flash rate This setting is also used to enable four channel relays If the four channel relay option is installed then the clock expects at least one alarm setting for relays 2 3 or 4 If relays 2 3 or 4 are not included in any alarm scheduled at this time then set Mode 59 99 16 This will cause the relays to correctly initialize at power up Also set Mode 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB Se
29. as a simple up timer can be controlled with a few simple commands To reset the timer to the starting value send 1 AACCKXXXXXXXXXXXXKXXKXXKXXKXXKXXKXXKXXKXXF AA display address 00 CC 63 XX space To start stop or pause the timer send AACCKXXXXXXXXXXKXXKXXKXXKXXKXXKXXKXKXKXF AA display address 00 CC 61 XX space General Purpose PC Commands Most commands except Modes 70 and 71 can be changed from a PC over serial or Ethernet PC command 99 is used to pass on the required address and values The communications protocol follows General PC Command Fixed Fields x pad with ASCII space AACCNNMMVVVVVVVVVXLLLLLLLLLXxXxxx AA Display address x0 99 CC Command 01 99 NN First level mode address x0 99 MM Second level mode address optional x0 99 VVVVVVVVV First Value optional 99999999 to 999999999 LLLLLLLLL Second Value optional 99999999 to 999999999 Command List Basic Operating Commands Start Timer Pause Timer Increment Count 1 AACCXXXXXXXXXXXXXXXXXXXXXXXXXXXX CC 61 Timer Control Decrement Counter AACCXXXXXXXXXXXXXXXXXXXXXXXXXXXX CC 62 Reset Timer Reset Counter I AACCXXXXXXXXXXXXXXXXXXXXXXXXXXXX CC 63 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 143 3800 295 0220 Enable Long Duration Timer Mode 32 18 1 1 AACCNXXXXXXXXXXXXXXX
30. if eight alpha digits are installed and the message length entered is 24 characters long the message will flip one frame at a time displaying eight characters at a time See also Mode 32 3 to set the number of rotating display pages Mode 51 4 determines the period between frames Mode 45 3 determines the scroll speed delay in milliseconds The default speed delay is 5 milliseconds 3 alternate between two alpha messages depending on red warning light status This mode is used to switch between two fixed messages depending upon the condition of the warning lights Set Modes 43 1 4 32 26 2 See also Modes 43 2 43 3 52 1 and 51 2 4 alternate between two alpha messages depending on yellow warning light status This mode is used to switch between two fixed messages depending upon the condition of the warning lights See also Modes 43 1 4 32 26 2 43 2 43 3 52 1 and 51 2 5 alternate between two alpha messages depending on green warning light status This mode is used to switch between two fixed messages depending upon the condition of the warning lights See also Modes 43 1 4 32 26 2 43 2 43 3 52 1 and 51 2 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 111 dB o FNO First Menu Level Mode Number Second Menu Level 1 255 then 0 16 Mode Description and Instructions 6 select one of four alpha messages depending on war
31. radio channel scan all channels in receive mode 16 47 U S Canada radio channel scan all channels in receive mode 48 55 U S Canada no channel scanning includes 40 offset 56 87 Australia New Zealand scan all channels in receive mode 88 95 Australia New Zealand no channel scanning includes 40 offset Transmit and Repeat mode always uses fixed channel assignments Digital Slave Clock This configuration will enable a digital clock as a slave clock receiving time data from either a master clock or a repeater clock Mode 32 12 0 disables serial data output Mode 37 67 1 or 2 places the 900 MHz data radio in receive mode 1 GPS port 2 SR ST port Mode 37 68 Determines the radio channel to be used for receive See channel operation below 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 131 800 295 0220 Mode 37 69 Determines the radio group assignment 5 default 20 default U S Canada radio channel scan all channels in receive mode 16 47 U S Canada radio channel scan all channels in receive mode 48 55 U S Canada no channel scanning includes 40 offset 56 87 Australia New Zealand scan all channels in receive mode 88 95 Australia New Zealand no channel scanning includes 40 offset Setting this mode to a channel less than 60 will cause the ra
32. reset displays once per hour 5 reset displays once per day 6 reboot once per day 7 reboot once per hour if sync not received in last hour do NOT use for wireless transmitters Alpha digits on the numeric data buss will flicker if refresh rate is too fast Special Serial Sync Control Codes O disable receipt of special control codes over the sync wire default 1 enable receipt of special codes These codes are typically sent from a PC to the clocks to set and reset long duration elapsed timers This mode allows other clocks on the same sync circuit to ignore these control codes Split Time Timer Display Number of seconds to display split time Default is 3 seconds See also Mode 32 4 Split time is displayed when the timer control button is momentarily pressed while the timer is running Auto Counter Auto Start O disabled default 1 enable the auto counter to automatically start running at power up The count will resume from the last count saved See also Mode 45 1 Midnight Sync Output Using Alarm Relay 0 disabled default 1 enabled use alarm relay for midnight sync output Example Send a 100 ms pulse at 3 00 am over radio sync using the alarm relay Mode 6 1 Mode 16 3 00 Mode 17 00 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com na gC First Menu Level Mode Number Second Menu Level Mode Description and Inst
33. www brgprecision com 800 295 0220 VI 59 Minute Analog Master Clock Operation Description A single BRG digital clock may control 500 or more 59 minute analog slave clocks 59 minute analog clocks are used for their increased reliability over older analog clock systems The 59 minute analog clock contains a microprocessor that greatly reduces the power required compared to older clock designs No relays ratchets or pawls are used All power and sync pulses to the analog clocks are provided over a simple three wire circuit The master clock sends minute and second correction impulses hourly Additionally at Sam and 5pm the hour is corrected In the event of a power outage the master clock will continue to keep time up to ten years When the power returns the master clock will correct the analog clocks at the next regular sync interval If continuous time display is required during a power outage a simple off the shelf uninterruptible power supply UPS will provide many hours if not days of operation for the entire system Installation It is recommended to use 14 ga to 16 ga wire between the master clock and analog clocks Any wiring layout may be used including star T and buss configurations More wiring legs will reduce overall wiring resistance All wiring should be in parallel If the master clock needs to be removed for any reason the slave clocks will continue to operate normally although they will no lo
34. 0 255 All positions including and after ZZZ will be replaced with ASCII 32 Alarm Channel Relay Output Mode 59 n I AACCZZVVXXXXXXXXXXXXXXXXXXXXXXXX CCc 40 ZZ 1 99 alarm position VV 0 16 alarm relay value combination of 1 2 4 8 Alarm Times Mode 27 n and 28 n AACCZZSSMMHHXXXXXXXXXXXXXKXXXKXXXXF CC 41 ZZ 1 99 alarm position SS second MM minute HH hour Alarm Day of the Week Code Mode 29 n RACCZZVVVxXXXXXXXXXXXXXXXXXXXXXXX CC 42 ZZ 1 99 alarm position VVV 0 255 alarm day of the week code In addition to day of the week combination codes Mode 29 also accepts any day combination A value greater than 128 is treated as a binary command Days of the week are assigned the following binary numbers Mon 1 Tue 2 Wed 4 Thu 8 Fri 16 Sat 32 and Sun 64 Any combination of days may be selected by adding their assigned numbers together and then adding 128 to that value For example if Mon Wed and Fri are required then the valu would be 149 1 4 16 128 149 Alarm Schedule Group Assignment Mode 38 n AACCZZXXXXXXXXXXXKXXXXXXKKKXXXXKXKKF CCc 43 ZZ 0 99 alarm schedule group assignment Active Alarm Schedule Mode 37 1 I AACCZZXXXXXXXXXXXXXXXXXXXXXXXXX CC 45 ZZ 1 99 active alarm schedule Alarm Schedule Beginning Date Range Mode 53 n AACCZZMMDDYYYYXXXXXXXXXXXKXXXXXXXF CC 46 ZZ 1 20 alarm schedule season MM month DD day YYYY year Alarm Schedule Ending Date Range
35. 00 local time Tiger Version 4 09 or later 2 Transmit to UTS movements from 00 00 to 07 00 and 19 00 00 N 3 23 Transmit between 02 00 and n inclusive Rev 4 72 Setting n 3 for Chouchin movements will force the movement to perform a complete reception everyday at 2 00 40 See also Mode 37 77 Setting Mode 37 54 1 will eliminate transmissions during the day to reduce radio traffic congestion It also allows the master clock to provide time data to analog clocks 5 out of the 7 times per day they expect to receive a transmission Alarm and other transmissions will occur normally throughout the day Wireless Transceiver Carrier Detect Function O disabled 1 enabled default When enabled this function causes the transceiver to monitor the radio channel before transmitting If the channel is busy then no time transmission will occur The clock must be restarted after changing this value Wireless Alarm Function Mode 37 56 wireless alarm relays 0O disabled default 1 use the GPS port to 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions control the transmitter 2 use the SR ST port to control the transmitter Four alarm channels and multiple relay modules are supported If wireless time synchronization is enabled time sync transmissio
36. 1 Monday and 7 Sunday For example 357 represents the last Sunday in March or 1117 represents the First Sunday in November If the value gt 2000 then the right two digits represent the day of the month The left two digits minus 20 equal the month For example March 15th 2315 April 1st 2401 The day of the year derived from this rule is stored in Mode 52 12 If the DST date is a fixed day i e 15 of the month then set this mode to 0 and enter the Julian day into Mode 52 12 instead See Mode 24 n 23 and Mode 45 36 Custom Daylight Saving Rule Starting Value for Mode 24 n 24 ver 4 64 Default 0 Values for rule driven custom daylight saving time for Mode 24 n 24 The format is MMRD where MM month 1 12 R instance of the select day of the week 1 5 5 last instance D day of the week 1 7 where 1 Monday and 7 Sunday For example 357 represents the last Sunday in March or 1117 represents the First 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 106 nae ge First Menu Level Mode Number Second Menu Level 1 24 display 1 24 display 1 99 alarms 111 3231 9999 9999 Mode Description and Instructions Sunday in November If the value gt 2000 then the right two digits represent the day of the month The left two digits minus 20 equal the month For example March 15th 2315 April 1st 2401 The day of th
37. 23 55 Dual relay output Mode 32 2600 eens 57 Elapsed days and hours starting Mode 35 67 Ending Time hours minutes Mode 9 44 Ending Time seconds Mode 10 44 External Control Line Mode 32 6 ee 51 Format when switching from timer Mode 32 45 60 Long duration elapsed time Mode 32 18 56 Long duration format zone 1 Mode 37 34 76 Long duration format zone 2 Mode 37 35 77 Long duration format zone 3 Mode 37 36 77 Long duration target mon day Mode A4 1 98 Long duration target year Mode AAT 98 Master Slave mode Mode 21 A0 77 Precision Mode 21238 77 Reset button operation Mode 2110 70 Reset operating mode Mode 37 11 eee 70 Return to real time from timer mode Mode 32 37 59 Reverse Mode 23 55 Signal light blinking precursor Mode 37 39 77 Single line control start stop reset Mode 37 19 73 Split time Mode 32 31 oo eee eee csee ce cseeeneeeee 58 Start button operation Mode 37 900 eee ees 70 Start auto Mode 218 70 Starting Time hours minutes Mode 7 44 Starting Time seconds Mode 8 0 0 eee 44 Stop Elapsed Timer auto Mode 13 44 Sync receive real time Mode 32 21 eee 56 Timer Control direction Mode 32 5 0 0 cesses 51 Timer control display format Mode 208 67 Transmit serial enable disable Mode 32 51 61 Timer Control Set timer control
38. 25 Precision maintains accurate time low cost clocks may be adjustment in 5 8 years Oscillator avoiding the need for relocated with ease high Not recommended where frequent time updates The accuracy reliable split second long term clock automatically adjusts accuracy is required for crystal aging and ambient temperature changes WWVB Time Time is received from the Highly accurate medium Unreliable prone to N A Receiver NIST low frequency cost interference outdoor Disconti transmissions antenna required signal not nued available in all areas 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 121 Dee eae gu Power Line Communications Slave Slave Slave Optional GPS or CDMA Time Receiver Power Line Power Line Power Line Power Line The Master Clock sends the Slave Clocks receive time synchronization data over the power line time to slave clocks over Various power line connections are available including hard wired connections the power line It can short power cords for plugging into an outlet located behind the clock and optionally include a GPS or long power cords CDMA time receiver Clock synchronization over the existing power line eliminates or greatly reduces the need for sync wiring First the master clock places the time onto the power grid Then all slave clocks receive the time from the power line This
39. 29 Temp C ten 30 Temp C unit 31 Julian date or day of the year Unit see also 1 and 2 128 Counter hundred millions digit 129 Counter ten millions digit 130 Counter millions digit 131 Counter one hundred thousands digit 132 Counter ten thousands digit 133 Counter thousands digit 134 Counter hundreds digit 135 Counter tens digit 136 Counter units digit 137 Counter millions comma 138 Counter thousands comma 139 GPS CDMA IRIG B and Ethernet Sync Status sync space no sync 140 GPS CDMA IRIG B and Ethernet sync Status no sync space sync 141 Sunrise Time hours ten 142 Sunrise Time hours unit 143 Sunrise Time Minute ten 144 Sunrise Time Minute unit 145 Sunset Time hours ten 146 Sunset Time hours unit 147 Sunset Time Minute ten 148 Sunset Time Minute unit 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 110 nae ge First Menu Level Mode Number Second Menu Level Mode Description and Instructions 149 Up Down Timer Counter direction arrow blank for real time 150 Week of the Year ten value int DOY 7 1 151 Week of the Year unit value int DOY 7 1 Number of Alpha Digits Installed This value is configure
40. 32 55 1 Enable multiple processor quick access Mode 37 29 1 Control button lockout must be set to 1 4 5 or 6 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BR o FNO o First Menu Level Mode Number Second Menu Level 5 6 8 10 12 14 16 18 20 22 5 6 8 10 12 14 16 18 20 22 Mode Description and Instructions The Mode button should be pressed at a rate of approximately 2 times per second when moving from display to display To disable the control buttons on all displays press the mode button until no decimal indicators are illuminated SR ST Serial Port Speed default 14 9600 baud Mode 32 15 9 to enable 300 Baud 600 Baud 1 200 Baud 2 400 Baud 4 800 Baud 9 600 Baud 19 200 Baud 38 400 Baud 76 800 Baud 153 600 Baud GPS Serial Port Speed default 14 9600 baud Mode 32 15 9 to enable 300 Baud 600 Baud 1 200 Baud 2 400 Baud 4 800 Baud 9 600 Baud 19 200 Baud 38 400 Baud 76 800 Baud 153 600 Baud Alpha Digital Lettering Menu System 0 disabled default 1 enabled This mode displays the menu system on the digital alpha numeric lettering in addition to the normal numeric digits This allows the alpha digits to be used without numeric time digits See Mode 32 54 to configure the type of digital lettering used If a clock has only digital lettering and the clock is restored back to factor
41. 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com iin eee First Menu Level Mode Number Second Menu Level Mode Description and Instructions does not provide date informatiuon only time Examples O PL transmits or receives on SRST port 0 Serial sync transmits or receives on SRST port 0 Serial sync receives on GPS port Ethernet sync transmits on SRST port 2 GPS receives on GPS port and PL transmits on SRST port 2 GPS receives on GPS port and serial sync transmits receives on SRST port 3 CDMA receives on GPS port and serial sync transmits on SRST port 3 CDMA receives on GPS port and PL transmits on SRST port 4 IRIG B receives on GPS port and PL transmits on SRST port 4 IRIG B receives on GPS port and serial sync transmits on SRST port 5 Thumbwheel switch on GPS port serial sync receives transmits on SRST port 5 Keypad on GPS port serial sync receives transmits on SRST port 7 Serial sync transmit on GPS port PL receives on SRST port 7 Serial sync transmits on GPS port Ethernet sync receives on SRST port 8 PL transmit only on the GPS port Ethernet receives on the SRST port DATUM Tymserve 2100 Notes Connect the clock to Serial Port A using an RS232 to RS422 converter Set the Sysplex timer to AUTO ON so it will begin sending time automatically on power up Because the year is not included in the data from the Tymserve 2100 the day of the year is not used Only the
42. 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com eg HH EE Timer Configuration Examples The following timer configurations are provided as examples of typical elapsed timers It is by no means intended to be all inclusive There are many thousands of ways to configure timers In timer mode the Up button becomes Start Pause Resume and the Down button becomes Stop Reset There is an optional timer control line available for specialized timer applications Modes 20 and above have two menu levels Up timer starting at zero No upper time limit Display minutes and seconds only on a four digit display Mode 23 1 24 set the display to 24 hour format Mode 7 0 00 reset to zero Mode 13 0 allow the timer to pass through the end time which defaults to 0 00 Mode 14 2 set up timer direction Mode 20 1 12 configure the display to show minutes and seconds hu Ne Hospital Code Blue or Operating Room timer with four digit display Normally display real time hours minutes and seconds An ordinary light switch with red wall plate is recommended to control the timer When the code blue switch is turned on the display will immediately switch to up timer mode reset the timer start counting up from zero Turning the timer switch off will pause the timer for the number of minutes specified in Mode 32 7 At the conclusion of the pause delay the timer will return to real time display Mode 23 1 24 s
43. 8X01 0E7229 oe 07474 0 600 N River Street Derby Kansas 67037 316 788 2000 Fax 316 788 7080 sales brgproducts com www brgprecision com BRG Digital Clock Timer Counter Installation and Operation Manual BRG Precision Products 600 N River Derby Kansas 67037 http www brgproducts com sales brgproducts com 316 788 2000 Fax 316 788 7080 Updated 3 10 2012 Our mission is to offer innovative technology solutions and exceptional service 600 N River Street e Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com lil EE Table of Contents WARRANTY AGREEMENT E 4 ENEE 12 FEATURES AND OPTIONS E 13 BG STAT EAU cess sescesss statuses esp siceesssvi re E Ent N uae ewes eso NEE RE E ones ta AAEE eas eee 15 OPERATION EE 16 IMPROVING CLOCK ACCURACY ssssssssesssesssesssesesrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrsrorsrsrsrsrsssssssssssssss 18 TIME ZONE CLOCK CONFIGURATION eessen dereen 19 TIME ZONE CLOCK CONFIGURATION EXAMPLES ccssssssssssssssssscsscssssnscsnssasssscsnccascsuscasesuceaccescenceascsaseass 20 UP DOWN ELAPSED TIMER CONFIGURATION cssscsssssssossssssosssscsnscsscssssnscsnccnscenccascsusensesuccascescsncensceasenseess 21 TIMER CONFIGURATION EXAMPLES cccsssssssssssssssssssssssssnscssssussnscsuccascssssnsesuccacescsnsesscensesuceascescensesseasesasenes 23 UP DOWN COUNTER CONFIGURATION ssscssscssssssssssscssscsnscan
44. Alarm Configuration Worksheet essere 36 Custom standard time switch B Mode 52 4 112 Alpha display position map Mode A 106 Daylight Savings Analog Master Clock Custom daylight savings switch B Mode 52 3 112 Enable Disable Mode 2128 75 Daylight Savings Bi Polar Analog Master Clock Custom standard time switch B Mode 52 4 112 Operational Overview oe eee eeeeeeeeeeeeeeeseeeseeeeees 33 Daylight Savings Blinking display individual Mode 26 48 Custom daylight savings switch B Mode 52 3 112 Brightness auto Mode 27214 54 Daylight Savings CDMA Custom standard time switch B Mode 52 4 112 Enable Disable Mode 2718 54 Daylight Savings OVER VIC W sos sass sicsttescdscccasressstasteinassunestssioutiveraunseueden 136 Custom daylight savings switch B Mode 52 3 113 Circle Line Display Mode Mode 2120 76 Daylight Savings Code Blue function Mode 2014 51 Custom standard time switch B Mode 52 4 113 Control Button Lockout Mode 37 29 75 Daylight Savings Counter Custom daylight savings switch B Mode 52 3 113 Absolute value on counter value Mode 32 39 59 Daylight Savings Accelerated advance Mode A 114 Custom standard time switch B Mode 52 4 113 Actual Goal difference Mode 32 53 n se 62 Daylight Savings Alarm enable disable Mode 32 10 eee 52 Custom daylight savings switch B Mode 52 3 113 Auto counter auto start Mode 32 32 oseese 58
45. Available Options Clock Timer Counter external control line Auto Brightness Option This option enhances the standard digital brightness control Radio Synchronization GPS atomic time receiver option turns the digital clock into a perpetually accurate master clock CDMA atomic time receiver no external antenna required Serial Wired Synchronization Option All clocks display the same time Clock operates as either Master or Slave Serial line control and configuration Power line communications for synchronization Ethernet communications for configuration control and synchronization NTP Network Time Protocol allows the clock to obtain the time directly from Government or local timer servers IRIG B SMPTE ESE wire sync receiver Infrared Remote Control Option provides full programming control Wired remote control option Electronic Alert Horn or internal beeper for alerting and timer applications Alarm Relay Output for alerting timer and control applications Temperature Sensor for indoor or outdoor applications Timer Counter Change Start Change End Shortcut Buttons to directly access Start End values Digital Zone lettering Thumb Wheel Switch Direct Start End and Miscellaneous Parameter Entry Ultra bright displays Timer Indicator Lights Tripod Display Stand Ultra high Precision Oscillator 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com
46. Duration Elapsed Time 0 Starting time and day is not set on power up default 1 set the Starting time and day from target time and date on power up or when exiting the menu This mode is typically used with long term elapsed timers so that if power is lost the timer will resume correct operation when the power is restored While in long duration timer mode pressing the timer control button will temporarily switch to real time operation At this point you can change the time and by pressing the mode button you enter the menu system to change the real time month day and year Pressing the timer control button again will return to long duration timer mode Modes 37 34 37 35 and 37 36 determines the display format used for long duration timer operation See also Modes 32 17 32 21 37 40 When counting down to a future time and date the timer will stop at the target time and date is reached If you want to pass through the target time and begin displaying the elapsed time from the target time then set Mode 32 17 1 This will enable the auto reverse feature Mode 13 is ignored when Mode 32 17 1 Mode 32 21 allows time updates from an external source to maintain the accuracy of a long duration timer See also Mode 37 49 for displaying days and hours on an alpha display Timer Time Zone Applies only when Mode 32 18 1 This value must point to the appropriate time zone if a time zone offset value is used For example if a GPS receive
47. FITNESS FOR A PARTICULAR PURPOSE THIS SOFTWARE IS SOLD AS IS AND YOU THE LICENSEE ARE ASSUMING THE ENTIRE RISK AS TO ITS QUALITY AND PERFORMANCE IN NO EVENT SHALL BRG PRECISION PRODUCTS INC BE LIABLE FOR DIRECT OR INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE SOFTWARE OR FROM ANY ERROR OR DEFECT IN THE SOFTWARE OR ITS DOCUMENTATION SUCH DAMAGES INCLUDE BUT ARE NOT LIMITED TO LOSS OF PROFIT LOSS OF SOFTWARE OR DATA AND DAMAGE TO YOUR MONITOR IN NO EVENT SHALL BRG PRECISION PRODUCTS INC LIABILITY EXCEED THE PRICE PAID FOR THE SOFTWARE The above exclusions may not apply to you This warranty provides you with specific legal rights There may be other rights that you may have which vary from state to state 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com PT EEN BRG Firmware License Agreement BRG Firmware Copyright 2000 BRG Precision Products Inc THE FIRMWARE INCLUDING ITS CODE DOCUMENTATION APPEARANCE STRUCTURE AND ORGANIZATION IS A PROPRIETARY PRODUCT OF BRG PRECISION PRODUCTS INC AND IS PROTECTED BY COPYRIGHT AND OTHER LAWS TITLE TO THE FIRMWARE OR ANY COPY MODIFICATION OR MERGED PORTION OF THE FIRMWARE SHALL AT ALL TIMES REMAIN WITH BRG PRECISION PRODUCTS INC License Agreement BRG Precision Products Inc grants the purchaser a non exclusive nontransferable license to use the BRG Fir
48. First Menu Level Mode Number Second Menu Level Mode Description and Instructions 32 26 2 for four channels relays 2 use secondary output relay with warning display flash rate 3 no relay output with warning display flash rate 4 use internal transistor array to drive lamps set 32 26 2 disables temperature Sensor and WS Sync Input 5 allow red yel light with flashing display set 32 26 2 See also Mode 37 39 Warning Alarm Hours and Minutes Use Mode 43 1 to enable the warning alarm The warning alarm activates before the Ending alarm and therefore the warning time should occur before the End time Warning Alarm Seconds Use Mode 43 1 to enable the warning alarm Warning Alarm Duration O disabled default This mode will activate the output relay at the designated warning time for 1 50 seconds This time is independent of the ending alarm duration Alarm duration 1 50 seconds The warning alarm may be used with the transistor array output signal lights i e 43 1 4 32 26 2 The warning alarm may also be used without signal lights Warning Alarm Display Blink Rate 0 no flashing 1 99 flashes per second See also Modes 37 39 Ending Month Day This selection is used in conjunction with modes 9 and 10 Ending hours minutes and seconds See also Mode 32 18 to enable long duration timer mode While in long duration timer mode pressing the timer control button will temporarily switch to real time operatio
49. Julian Standard Time Switch User Defined 24 Enter the day of the year to switch from daylight time to standard time This value is used by Mode 24 code 24 Both modes 52 135 and 52 14 must be set to the desired day of the year See also Mode 45 39 to define new daylight saving rule Mode 45 39 must be set to 0 to enable this mode otherwise use Mode 45 39 to enable rule base switching Alarm Schedule Date Range Beginning Month Day 12 31 default Set Mode 37 1 0 to enable This mode is used to set the beginning month and day of an alarm date range If Mode 54 has the same date the alarm will activate only one day If the Year in Mode 55 equals 2000 then the alarm will activate every year with the month day range specified The ending date must be occur after the beginning date See also Mode 38 to force an alarm schedule active Alarm group is different than the other 19 alarm groups If no date range is active then group is the default This feature reduces the number of alarm entries required in some schedule situations Mode 27 set the hours and minutes Mode 29 sets the day of the week required Alarm Schedule Date Range Ending Month Day 12 31 default Set Mode 37 1 0 to enable This mode is used to set the ending 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 114 BR o FNO o First Menu Level Mode Number Second Menu Level
50. MHz UHF digital radio system operates at a lower power on the license free band This system is used primarily for clock synchronization and control Digital Radio System Comparison 400 MHz Digital Radio System 900 MHz Digital Radio System Transmit power can be in the hundreds of Watts Maximum 1 Watt transmission power Very large coverage area than can include a university campus or an entire community Medium coverage up to one million square feet without a repeater However any digital clock can be configured to repeat the signal to dramatically increase the coverage area An FCC License is required BRG provides a service to obtain the license for a fee No FCC license is required in the U S or Canada Can be used by the U S government without additional frequency authorization Operates on the Industrial Scientific and Medical ISM band Transmitter can be more difficult to install than the 900 MHz system Slave clocks are simple to install Simple master and slave clock installation Wireless relays and audio tone generators are available Wireless relays and audio tone generators are available Wireless speakers are available that can reproduce live audio Live audio wireless speakers are unavailable The radio signals are not encrypted but they are encoded Wireless audio speakers utilize sub carrier channel guard for privacy All radio transmission are encrypted using the DES
51. MHz radio maximum power is initialized on power up Y1707 Wireless Receiver Operation 0 disabled default 1 enabled This parameter is used with mass notification commands from a telephone The Y1707 data receiver uses a limited storage receive buffer that must be considered when send long message data Enable this parameter when using Y1707 type receivers Relay Function Code for a Telephone Activated Wireless Relay Wireless Relay function To activate a wireless relay from a telephone enter xxyyyzz xx clock address yyy wireless relay starting address as defined by Mode 45 27 zz relay number Mode 37 73 determines the wireless relay action mode Example 1 Phone command 6410001 will activate wireless relay 1 at address 101 for 3 seconds using master clock 64 Mode 45 27 101 Mode 37 73 23 Address 101 pager capcode 07001010 Example 2 Phone command 6420010 will activate wireless relay 10 at address 210 for 5 minutes using master clock 64 Mode 45 27 201 Mode 37 73 43 Address 210 pager capcode 07002100 Use also Mode 37 56 to for wireless relay function codes Both relays within one wireless relay receiver will activate using the same function See also Mode 45 27 Wireless Message Board Audio and Relay Baud Rate 0 all POCSAG transmission are 512 bps 1 all transmissions are 1200 bps except analog and digital clocks 2 all transmissions are 2400 bps except analog and digital clocks Time is always sent to Ana
52. Mode 20 72 107 Software PC serial ethernet control program 137 Standard Tiger Display Modes AAA 14 Sunrise Sunset Display intensity for nighttime Mode 32 36 59 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BiG ee EEN Indicator selection Mode 27128 59 Latitude Fraction Mode Di 116 Latitude Integer Mode 61 n se 115 Longitude Fraction Mode oi 116 Longitude Integer Mode Di 116 Sync 59th minute pulse Mode 213 68 Enable disable special sync control codes Mode 32 leede 58 Midnight pulse Mode 2733 58 Midnight sync duration override Mode 45 8 99 Pulse sync period Mode 213 68 Real time timer sync Mode 32 210 56 Reception offset Mode 2718 52 Reset Time hours minutes Mode Ip 45 Reset Time seconds Mode II 45 Serial communications checksum Mode 32 34 59 Serial protocol Mode 2120 73 Serial sync output delay Mode 45 9 wo 100 Serial transmission modes Mode 32 12 5 53 Status Indicator decimal point colon Mode 32 2 50 Status Indicator PM Mode 2731 50 Sync Pulse Output Duration Mode 15 0 0 44 Sync receive time zone offset Mode 45 5 99 Transmission offset Mode 210 52 Transmit serial enable disable Mode 32 51 61 Sync Pulse Transmit Mode Mode 6 e eee 43 System Information Mode o 115 Temerature
53. O Longitude minutes M Longitude direction 0 East 1 West V Display method Mode 32 35 Y Display intensity Mode 32 36 t A 600 N River Street Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com 150 800 295 0220 BRG External Control Line Wiring Diagram CL Option The external clock timer counter control line includes eight terminals for controlling the display with external devices Apply 12 24 volts DC between the ground terminal and the desired control terminal to activate the respective line Use 5 24 volts DC only CLOCK TIMER COUNTER i CO 4 Ground NEGATIVE Mode Menu Access Change Counter or Timer Preset lt Change Counter Down Stop Timer or Timer Reset Reset Timer Reset Counter x Up t Timer Control Macro Increment Count Decrement Count Start Timer Pause Timer Resume Timer To activate a control function apply 5 24 volts DC between terminal 8 and the desired control terminal For dry contact switch operation connect the switch between terminal 1 and the desired control terminal 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 151 Clock Timer Counter with Wall Switch Connector CLOCK TIMER COUNTER e Will Inline Connector MILS
54. Once at mode 14 press Mode to display the current operating mode Using the Up or Down buttons select mode 4 for up count or mode 5 for down count Press the Mode button to exit back to the previous level Press the Down button to move to 0 which will exit to normal display mode The last count is saved to non volatile memory if power is lost Display Mode is automatically set when in counter mode Counter Increment Button Debounce 0 9999 button delay in milliseconds Other applicable modes Mode 11 Start count or the value to appear when the Down button is pressed Mode 12 End count The value is optionally used to activate a contact closure or to stop the counter Mode 13 Stop counter at the End count or continue when the End count is reached If at End and Start 0 then Mode 13 0 Mode 26 Blinking Display Display may be set to blink when End count is reached Mode 32 13 Alarm pulsing Mode 34 Additional alarm pulsing Mode 45 1 Auto increment count 0 9999 Mode 45 2 Auto increment rate value 0 9999 Mode 37 13 determines the rate Mode 37 13 Auto increment rate period 0 tenths of second 1 second 2 minutes 3 hours Mode 45 4 Increment Amount default 1 the counter will increase by this about for each counter increment 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com o NEE Counter Configuration Examples
55. Phone command 6421010 will activate the wireless relay at address 219 for 5 minutes using master clock 64 Mode 45 27 210 Mode 37 73 43 Address 219 pager capcode 0702190 See also Mode 37 56 for wireless relay function codes Both relays within one wireless relay receiver will activate using the same function See also Mode 37 73 Forward Power This read only value represents the forward power of the last transmission This is for 406 470 MHz radio transmitters only See also Mode 46 Reverse Power This read only value represents the reverse power of the last transmission This is for 406 470 MHz radio transmitters only See also Mode 46 Custom Daylight Saving Rule Starting Value for Mode 24 n 20 Default 0 Values for rule driven custom daylight saving time for Mode 24 n 20 The format is MMRD where MM month 1 12 R instance of the select day of the week 1 5 5 last instance D day of the week 1 7 where 1 Monday and 7 Sunday For example 357 represents the last Sunday in March or 1117 represents the First Sunday in November If the value gt 2000 then the right two digits represent the day of the month The left two digits minus 20 equal the month For example March 15th 2315 April 1st 2401 The day of the year derived from this rule is stored in Mode 52 5 If the DST date is a fixed day i e 15 of the month then set this mode to 0 and enter the Julian day into Mode 52 5 instead See Mode 24 n 20 and
56. RESPECT TO THIS SOFTWARE ITS QUALITY PERFORMANCE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE THIS SOFTWARE IS SOLD AS IS AND YOU THE LICENSEE ARE ASSUMING THE ENTIRE RISK AS TO ITS QUALITY AND PERFORMANCE IN NO EVENT SHALL BRG PRECISION PRODUCTS INC BE LIABLE FOR DIRECT OR INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE SOFTWARE OR FROM ANY ERROR OR DEFECT IN THE SOFTWARE OR ITS DOCUMENTATION SUCH DAMAGES INCLUDE BUT ARE NOT LIMITED TO LOSS OF PROFIT LOSS OF SOFTWARE OR DATA AND DAMAGE TO YOUR MONITOR IN NO EVENT SHALL BRG PRECISION PRODUCTS INC LIABILITY EXCEED THE PRICE PAID FOR THE SOFTWARE The above exclusions may not apply to you This warranty provides you with specific legal rights There may be other rights that you may have which vary from state to state 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com Deeg EE EE AT amp T Natural Voices Software License Agreement 1 No Other Rights The End User herein referred to as Licensee acknowledges that it obtains no ownership rights in the AT amp T Natural Voices Software under these terms referred to as this Agreement and that no other rights other than those expressly set forth herein are granted or implied By way of example only Licensee s customers obtains no right to make copies of or distribute the AT amp T Natural Voices
57. River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions Setting Mode 51 7 n 16 where n is the alpha character position will blink one or more alpha characters once per second Mode 51 7 is used to indicate which character positions are to blink If no sync source is used setting Mode 32 2 4 will blink the designated characters continuously See also Mode 51 7 4 blink colon once per second when sync is lost must use display mode 2 GPS CDMA IRIG B Ethernet Setting Mode 51 7 n 16 where n is the alpha character position will blink one or more alpha characters once per second Mode 51 7 is used to indicate which character positions are to blink If no sync source is used setting Mode 32 2 4 will blink the designated characters continuously See also Mode 51 7 See also Mode 37 65 to configure the sync status timeout delay Numeric Display Fields This value determines the number of zone fields to use for a rotating zone display default 1 This mode is usually used in conjunction with digital alpha zone lettering For example a display that has four physical zones but needs to display eight zones total could alternate the display four zones at a time For this example Mode 32 3 would be set to 2 Mode 51 controls the zone lettering rotation Timer Control Ac
58. Software beyond the scope of license granted by the terms of this Agreement except to make a single copy of the AT amp T Natural Voices Software for Licensee s customers archival purposes and copies incident and necessary to Licensee s customers installation of the AT amp T Natural Voices Software on the hard disk drive of Licensee s customers computer All rights in the AT amp T Natural Voices Software including but not limited to trade secrets trademarks service marks patents and copyrights associated therewith are shall be and will remain the property and ownership of AT amp T the owner of the AT amp T Natural Voices Software including all physical copies thereof 2 Legends No Reverse Engineering Neither Licensee nor its customers shall alter any proprietary markings on or in the AT amp T Natural Voices Software including copyright trademark trade secret and patent notices Neither Licensee nor its customers shall reverse compile disassemble or reverse engineer or otherwise attempt to derive the source code from any portion of the AT amp T Natural Voices Software provided to Licensee or its customers in object code form 3 DISCLAIMERS AND DAMAGE LIMITATIONS LICENSOR MAKES NO WARRANTIES EXPRESS OR IMPLIED AND SPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY FITNESS FORA PARTICULAR PURPOSE TITLE OR NONINFRINGEMENT OR ANY WARRANTY ARISING BY USAGE OF TRADE COURSE OF DEALING OR COURSE OF PERFORMANCE IN NO EVENT SHALL LICENSO
59. This password is required for various transmissions that utilize POCS AG data communications including wireless relays message boards and speakers Relay Starting Address for a Telephone Activated Wireless Relay Default 999 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 103 dB o FNO o First Menu Level Mode Number Second Menu Level 111 3231 111 3231 Mode Description and Instructions This mode determines the starting address for up to 16 wireless relays When a telephone activation command is sent to an address equal to the value stored in Mode 45 27 plus the two digit relay number minus 1 then the function in Mode 37 73 will be sent to a wireless relay at the same address For example if Mode 45 27 100 and the relay number entered was 05 then the command would activate the relay both relay contacts 1 and 2 at address 104 The last two digits of the command determine which one of 16 wireless relay addresses to use To activate a wireless relay from a telephone enter xxyyyzz xx clock address yyy wireless relay starting address as defined by Mode 45 27 zz relay number Mode 37 73 determines the wireless relay action mode Example 1 Phone command 6410001 will activate the wireless relay at address 100 for 3 seconds using master clock 64 Mode 45 27 100 Mode 37 73 23 Address 100 pager capcode 0701000 Example 2
60. a multi user computer system not owned by the purchaser This license is effective until terminated You may terminate it at any time by destroying all copies of the software It will also terminate automatically if you fail to comply with any of the terms and conditions of the Agreement Upon termination of this license for any reason you agree to return or destroy all copies of the software This Agreement constitutes the entire agreement and understanding between the parties and supersedes any prior agreements representations or understandings whether oral or written relating to the Software This Agreement shall be governed by the laws of the State of Kansas Limited Warranty BRG Precision Products Inc warrants that the original software disk s are free from physical defects in material and workmanship under normal use for a period of sixty days from the date of purchase If during this warranty period you discover that the software disk s contains a physical defect return the defective item along with proof of purchase to BRG Precision Products Inc and you will receive a replacement at no charge This is your sole and exclusive remedy for breach of warranty THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND IN LIEU OF ALL OTHERS ORAL OR WRITTEN EXPRESS OR IMPLIED BRG PRECISION PRODUCTS INC MAKES NO WARRANTY OR REPRESENTATION EXPRESS IMPLIED OR STATUTORY WITH RESPECT TO THIS SOFTWARE ITS QUALITY PERFORMANCE MERCHANTABILITY OR
61. alarm off misc data position 27 length 1 wireless clock control 7 or 9 TZ offset misc data position 28 length 2 sec_fraction misc data position 30 length 2 display_format 1 misc data position 32 length 2 display_format 2 end data string position 34 length 1 BRG Clock Timer Counter Serial Command Structure Commands may be sent over a serial line to control various parameters of the BRG clock timer counter The command string consists of a 35 byte fixed length ASCII string The command string may include configuration parameters or operating commands The following commands are available in Tiger Digital Clock software version 2 65 or later Command String Format 35 ASC bytes x ASC space 1 2 3 01234567890123456789012345678901234 AACCKXXXXXXXXXXKXXKXXKXXKXXKXXKXKXKXXKXF eS ESS Data S Command 2 bytes OO FF Display address 2 bytes 0 99 Command start 2 bytes Si 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 142 3800 295 0220 pre If the display address is zero all clocks will accept the commands otherwise only clocks with a matching address number will receive the command Mode 32 42 is used to configure the display address The BRG clock timer counter can be configured many ways For example a display configured
62. attached to the back of the clock Reference the infrared remote instruction section found later in this manual The internal battery will maintain the time for about ten years All operating parameters are maintained in flash memory which does not lose its memory when power is lost When power is applied to the clock all displays will illuminate and display the time s as configured Changing operational parameters Mode 50 4 Zone Number Identifier This mode is used to identify the zone number of each four digit display in clocks that use multiple four digit displays 0 inactive default 1 displays the respective zone numbers of each display Once the zone number is displayed pressing either mode up or down will return to normal display mode Press the mode button and mode one will appear on the leftmost display If the month day appears press mode again to return to the mode one display Press the Up button until you reach Mode 20 Follow the steps below to configure Mode 20 Position Display Format Set each display format using this mode Display formats 2 or 3 are most common See Mode 20 in the mode definition table for other display formats Mode 21 Time Zone Offset from UTC Set the time zone offset for each time source using this mode Use 0 for Zulu or UTC time Mode 22 Position Time Source Set the time source for each display using this mode The time source number usually matches the display number There
63. back to the Starting value and the timer will remain in timer mode O disabled 1 99 minutes If 32 37 1 then pressing the timer control button while the timer is stopped or paused will return to real time Set mode 32 4 2 when using this mode UTC Local Time Serial Receive 0 expects to receive UTC time on RS 422 Sets hours minutes and seconds no date when receiving IRIG B SMPTE ESE time codes 1 expects to receive local time on RS 422 This mode is used when the slaves are to display the same time as the master or computer default Sets minutes and seconds only no hours or date when receiving IRIG B SMPTE ESE time codes 2 This mode is used to cancel daylight savings time when sending time from a computer to a time zone display Set Mode 45 5 to the time zone of the time received For example if CDMA is used to receive the time set Mode 45 5 to the local offset from UTC Also set Mode 32 65 to the local daylight saving rule in version 4 28 and later The default is U S daylight saving time See also Mode 45 5 to set the incoming time zone offset UTC Local Time Serial Transmit 0 transmits UTC time on RS 422 1 transmits local time on RS 422 default Timer Counter Alarm Control 0 enable counter timer alarm 1 disable counter timer alarm Mode and Display Format Switching 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com
64. be cases when you want to place radios into different groups For example a high school adjacent to a middle school may want to operate independently Assigning each school their own group number will accomplish allow them to operate data radios without interference between the two systems Changing this parameter will cause the clock to perform a system reboot Wireless Relay Function Code This parameter includes the relay functions found in Mode 37 56 but also includes the following dual relay functions The functions are specifically intended to control wireless speakers 61 Relay 1 ON 1 Minute Relay 2 LED 250mS ON 750mS OFF for 1 Minute 62 Relay 1 ON 3 Minutes Relay 2 LED 250mS ON 750mS OFF for 3 Minutes 63 Relay 1 ON 5 Minutes Relay 2 LED 250mS ON 750mS OFF for 5 Minutes 64 Relay 1 ON 6 Minutes Relay 2 LED 250mS ON 750mS OFF for 6 Minutes 71 Relay 1 ON 1 Minute Relay 2 LED 500mS ON 500mS OFF for 1 Minute 72 Relay 1 ON 3 Minutes Relay 2 LED 500mS ON 500mS OFF for 3 Minutes 73 Relay 1 ON 5 Minutes Relay 2 LED 500mS ON 500mS OFF for 5 Minutes 74 Relay 1 ON 6 Minutes Relay 2 LED 500mS ON 500mS OFF for 6 Minutes 900 MHz Maximum Power Level 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com Deeg EE gC First Menu Level Mode Number Second Menu Level Mode Description and Instructions 1 10 mW 96 1000 mW The 900
65. control In addition to displaying real time each clock includes up down timers and counters General Specifications Display Format Over 64 User Selectable Display Formats Tiger Processor Operating Modes 6 User Selectable Operation modes Real Time Up Timer Down Timer Up Counter Down Counter Event Timer Environment 32 degrees F to 120 Degrees F Humidity 0 to 95 non condensing Battery Backup 10 year Lithium Battery Clock Accuracy or 10 minutes per year at 70 degrees F correctable to or 1 minute per year An ultra high precision oscillator option is available the increases accuracy of 1 minute per year correctable to 1 second per year For further increases in accuracy a time receiver option is required Available time receivers include GPS CDMA IRIG B SMPTE PC and Ethernet Construction Aluminum Frame with anodized finish and anti glare lens Saw tooth picture frame hangers can be included for mounting when requested Power Requirements 4 watts per 4 digit 4 0 inch display 3 watts per 4 digit 2 5 inch display 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 800 295 0220 VI Features and Options The BRG Digital Clock offers flexibility and reliability for a wide variety of time display applications These clocks perform flawlessly whether you need to simply display hours and minutes or when you need a sy
66. down timer will start at 1 00 00 and count down to 00 00 00 At 00 00 10 the display will blink during the last ten seconds When the timer stops at 00 00 00 the display will change to display the year 2006 To return the display to real time cycle power to the display The alarm relay will close for 1 second if installed To test the display set the date to 12 31 2005 Then set Modes 7 0 00 8 20 27 1 23 59 and 28 1 40 Exit the menu system and run the real time forward to 11 59 PM The display will switch from real time to countdown timer at 11 59 40 PM and countdown starting at 00 00 20 At 00 00 10 the display will blink until it stops at 00 00 00 At this time the display will switch to 2006 To restore from test mode cycle power to the display Then set Modes 7 1 00 8 0 28 1 59 Or restore the original display configuration by restoring customer defaults The following configuration can also be used with four digital displays by changing the display types to 20 1 2 and 36 1 54 Modes 5 1 34 1 99 7 1 00 36 1 46 change for other display types 9 0 00 36 2 48 change for other display types 13 1 37 1 0 20 1 46 change for other display types 37 8 1 20 2 48 change for other display types 38 1 2 27 1 22 59 43 1 3 28 1 59 43 3 10 29 1 8 43 4 10 30 1 0 43 5 5 32 4 2 53 2 12 31 32 5 1 54 2 12 31 32 13 5 55 2 2005 change for other years 32 37 1 56 2 2005 change for other years 32 45 71 600 N Ri
67. encryption standard for increased security and reliability Excellent indoor coverage compared to frequencies below 400 MHz or higher than 1000 MHz Excellent indoor coverage compared to frequencies below 400 MHz or higher than 1000 MHz Uses the POCSAG world wide communications standard Uses standard sequential spread spectrum communications Digital and Analog clocks are available Also supports electronic message displays Digital and Analog clocks are available Also supports electronic message displays Master clocks range from 2 000 to 10 000 Slave clocks are slightly lower priced than the equivalent 900 MHz models The master clock is less than 1000 Slave clocks are slightly higher priced than the equivalent 400 MHz models A 400 MHz 25 Watt system with 50 analog or digital clocks cost about the same as an equivalent number of 900 MHz clocks Increasing the number of 400 MHz clocks would cost less than an equivalent 900 MHz system A 900 MHz system with 50 analog or digital clocks cost about the same as an equivalent number of 400 MHz clocks Increasing the number of 900 MHz clocks would cost more than an equivalent 400 MHz system 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 130 800 295 0220 BRG Digital Radio Synchronization continued 900 MHz Digital Radio Overview A 900 MHz digital
68. example to automatically start the timer at 8 00 am pause for lunch between 12 00 noon and 1 00pm and stop the timer at 5 00pm set Mode 27 1 8 00 Mode 27 2 12 00 Mode 27 3 13 00 and Mode 27 4 17 00 Set Mode 29 1 through Mode 29 4 to the desired day of the week codes Set Mode 32 61 1 to enable the automatic timer control feature Set Mode 49 1 5 to start the timer at 8 00 Set Mode 49 2 4 to pause the timer at 12 00 and Mode 49 3 4 to resume the timer at 13 00 Set Mode 49 4 4 to stop the timer at 17 00 Alarm schedule switching manual or by date range is also supported See Modes 37 1 and 38 Serial Transmit Zone 1 default 24 Zone to use for serial transmit time data This applies to serial two wire Ethernet and power line sync Display Load Line Level O high default 1 low must be used when 16 segment displays are used on the numeric data port A value of 0 is used when large amounts of digital lettering are used and or a large number of display zones This will help reduce display flickering due to interference 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions on long data cables A value of 1 is required when use 16 segment digital lettering on the numeric data port Serial Polling Rate 0 default 1 Increase the poll
69. geet LL ll ll we el IOCKS ae Deen Slave Clock includes Slave Clock includes endl sync kepeater Serial Sync Repeater Serial Sync Repeater 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 135 800 295 0220 GPS Atomic Time Receiver The GPS option allows legally traceable time to be obtained from global positioning satellites The digital clock is updated every second from the satellite signal and is accurate to a few milliseconds Clocks ordered with a GPS atomic time receiver have a short pigtail at the back of the clock This pigtail includes a RJ 45 plug with in line adapter Attach the line from the GPS receiver to this connector The clock must be connected to the GPS receiver before applying power to the clock Otherwise the clock will not properly initialize the GPS receiver The lower right decimal point will illuminate when the clock is locked onto the GPS time signal If the sync indicator does not illuminate at all try turning off the power to the clock momentarily then powering it back up Once the clock locks onto the time signal the sync indicator will remain on Other sync indication methods are available using Mode 32 2 Mode 32 15 must be set to 11 to enable GPS reception The lower right decimal point will go out if sync is lost RS422 wiring protocol is used between the clock and the GPS receiver antenna The CAT 5 cable may be exten
70. is a uniform method of sending time over a computer network By default the clock will automatically connect to the local network and attempt to act as a client to public or local SNTP time servers SNTP is a subset of the NTP protocol SNTP provides Universal Coordinated Time UTC to the clock The clock then implements local time zone offsets and daylight saving rules to display the correct local time The correct time will display within a few minutes of obtaining a time server lock The clock includes a list of 10 Internet SNTP time servers Local SNTP time servers may also be used The clock includes a network web server which is used to configure various network communication parameters Ethernet Interface The Ethernet interface includes an easy to use web interface Automatic address configuration DHCP is enabled by default However if a fixed network address will be used instead of DHCP then the interface configuration will need to be changed To configure the Ethernet interface it must first be located on the network The Clock Control program is used to discover clock s located on the same subnet as the PC Alternatively a program is available finder exe that will locate the clock most anywhere on the local network if DHCP successfully configured it e J D Finder Sample Joke Tasks Devices IP Address MAC Address Name Product 192 168 42 106 00 40 94 39 c2 fb Connect ME Configure IP Settings 192 168 4272 0 00 4
71. master clock is initialized N 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com n EE 4 Check the date Momentarily press the Mode button once A 1 will appear on the display Press the Up button once and a 2 will appear Press the Mode button and the Year will appear Use the Up and Down buttons as necessary to change the year Once the current year is displayed press the Mode button and a 2 will again display Press the Down button and a 1 will display Press the Mode button and the Month and Day will display Use the Up and Down buttons as necessary to change the date Holding the buttons down will cause the date to change faster If you cross over the end of the year you will need to again change the year as described previously Once the correct Month and Day is displayed press the Mode button and a 1 will appear Then press the Down button and a 0 will appear briefly then the current time will again be displayed 5 Check the current time Use the Up and Down buttons to change the Hours and Minutes as necessary Holding the buttons down will cause the time to change faster If 12 hour display mode is used default then note if the PM indicator is illuminated in the upper left corner of the display 6 To initialize the master clock press the Timer Control button The current analog clock time will display on
72. mode 13 1 then the timer will not start running This mode is ignored when auto restart timer is active 32 18 1 A value of 2 is used with an up timer in conjunction with signal lights When the timer hits the End time the yellow light turns off the red light turn on and the timer continues counting Operating Mode This value determines the operating function of the clock 1 Real Time Clock default 2 Up Timer 3 Down Timer 4 Up Counter 5 Down Counter Sync Pulse Output Duration 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO o First Menu Level Mode Number Second Menu Level 1 24 display seconds 00 to 59 0 00 to 9 99 Display format number Mode Description and Instructions This value determines how many seconds the sync pulse line is held active This impulse sync line is used primarily with sync radio transmitters default 2 seconds System Starting Time hours minutes This value determines the Starting value when the reset line is activated This applies to once per day resets only See Mode 37 3 for setting the update frequency default 3 00 am Example Send a 100 ms pulse at 3 00 am over radio sync using the alarm relay Mode 6 1 Mode 16 3 00 Mode 17 00 Mode 32 33 1 Mode 37 3 1 Mode 45 8 100 System Starting Time seconds This value determines the Starting value when the r
73. multiple repeaters are deployed 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com RT ce Eg Nt SO Minute Wire Synchronization The wire sync system utilizes the 59th minute protocol This sync method sets the minutes and seconds hourly and corrects the hour twice a day The clocks will maintain split accuracy throughout the day In the absence of the master clock the slave clocks will continue to operate normally on their own clock circuit even switching between daylight saving and standard time if necessary Power outages and or glitches have little or no effect on time accuracy Sync wiring is very flexible Most any combination of star parallel buss or network wiring may be used Hundreds of clocks may be driven from a single master clock Sync wire length may be 5 000 feet or more depending on wire size the number of slave clocks Clocks may be ordered with individual power cords and or AC adapters Additionally clocks can be powered by one or more low voltage transformers Low voltage systems eliminate the need for an AC outlet at the clock The 59 minute sync protocol is resistant to interference and is considered one of the most reliable sync methods available AC Line Powered Clocks X Master Slave Slave Slave Optional GPS or CDMA Time Receiver 8 d D 8 Power Line yrcWie Power Line y
74. of sync Alarm Schedule Display and Quick Select 0 disabled default 1 enabled The display must be configured with Mode 20 2 1 This mode allows quick alarm schedule group change Simply use the Up and Down buttons to change the alarm schedule The schedule change will occur in 10 seconds after the last button press Data Radio Communications 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions O disabled default no data radios installed 1 client slave radio on the GPS port 2 client slave radio on the SR ST port 3 server master radio on the GPS port use with 900 MHz master clock 4 server master radio on the SR ST port 5 repeater radio on the GPS port 6 repeater radio on the SR ST port This mode supports the use of data radios to send and receive data to and from remote electronic message displays timers counters and clocks CEL Radios Values of 1 3 and 5 configures the CEL commands from menu Mode 74 and 74 to use the GPS port Values of 2 3 and 6 configures the CEL commands from menu Mode 74 and 74 to use the ST STport BRG data radios incorporate DES data encryption developed for the U S Government This two key secure communications method prevents changing or reading communications data and other interference This s
75. quickly change the value Some clocks are configured with these buttons temporarily disabled If the display blinks when the mode button is pressed mode lockout has been enabled Hold down the mode button until the blinking stops about 5 seconds then release A 1 should appear meaning you have access to the menu system The optional infrared radio remote control has equivalent buttons for each of the standard control buttons plus the change starting and ending time or count buttons Please refer to the infrared remote instruction section for further explanation Press the mode button to switch from real time display to mode selection Mode number 1 will display If the Day Month displays instead of mode 1 press the mode button again Once Mode 1 displays use the Up and Down buttons to move to the desired mode 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 800 295 0220 Press the Mode button again to enter a configuration mode The Up and Down buttons are used to change modes and values Press the Mode button again to exit the current mode The mode change function will timeout and return to normal time display mode after 60 seconds of inactivity To return to normal time display mode Press the Timer Control Button or change the mode number to zero or allow the menu system to timeout 600 N River Street Derby Kansas 67037
76. radio synchronized clock system is comprised of a master clock and one ore more slave clocks The master clock can use one of a variety of optional time acquisition methods include GPS Global Positioning System CDMA cell towers Ethernet NTP Network Time Protocol IRIG B missile and space protocol SMPTE motion picture and television protocol and others The master clock can also be manually set to operate from its internal ultra high precision oscillator To increase coverage one or more digital slave clock can be configured in the field to repeat the signal This important feature can dramatically increase the coverage area The digital receivers automatically scan The DES data encryption system is a standard developed for the U S Government Every BRG 900 MHz digital radio utilizes DES for increased security and reliability Only a few clock configuration parameters are needed to enable the master clock Digital Master Clock This configuration will enable a digital clock as a master clock sending time data once per second To expand the coverage area see Digital Repeater Clock below Mode 32 12 1 enables serial data output Mode 37 67 4 or 5 places the 900 MHz data radio in transmit mode 4 GPS port 5 SR ST port Mode 37 68 Determines the radio channel to be used for transmissions See channel operation below Mode 37 69 Determines the radio group assignment 5 default 20 default U S Canada
77. sensor enable disable Mode 32 5061 63 Temperature sensor adjustment Mode 46 106 Thumbwheel Switch Enable Disable Mode 32 15 00 eee eeeeeee eee 54 Thumbwheel Switch Configuration Mode 37 26 73 RI 119 Exit menu system Mode U N 43 Sync source time zone Mode 32 19 ee 56 Time Adjustment Range Mode 37 37 eee 77 Time Correction Automatic Mode A 43 Time Zone Digital lettering default time source Mode 37 22 73 Digital lettering manual change Mode 37 20 73 Forced time offset Mode 33 66 Nighttime intensity Mode 27 208 59 Number of four digit displays Mode 18 45 Numeric display fields Mode 32 3000 cesses 51 Offset from Zulu Mode 2 47 Sync receive time zone offset Mode 45 5 99 Sync Reception offset Mode 2728 52 Sync Transmission offset Mode 32 9 e eee 52 Time source logical Mode 271 47 Zone number identification Mode SO 3 108 Zone number identifier Mode 218 69 Timer 12 24 hour display format Mode 48 1 0 0 eee 107 Accelerated time for special effects Mode 32 22 57 Activate alarm relay when timer starts Mode 32 24 57 Alarm activates timer control line Mode 34 66 Alarm control Mode 27 17 70 Alarm enable disable Mode 27310 52 Auto restart Mode 218 70 Change Start End button configuration Mode 37 14 71 Days and Hours operating mode Mode 37 6 69 Direction auto reverse Mode
78. the LED should blink off momentarily when the sync data is sent If the LED polarity is reversed the LED will remain off When the clock sends sync data the LED will blink momentarily Wired Synchronization Examples The following example illustrates how all clocks may be synchronized to the master using only two wires The slave clocks repeat the sync signal Use Cat 5 twisted pair wire for up to 4 000 feet between any two clocks GPS or CDMA Receiver Master Slave Slave 4 J 7 O Sync Out Red Sync In Sync Out Rea Sync In Sync Out ro More CI 5 J soa nen Clocks Black Master Clock includes Slave Clock includes Slave Clock includes GPS or CDMA Time Receiver Serial Sync Repeater Serial Sync Repeater Serial Sync Transmitter The following example illustrates how the sync wiring may be P or Y connected to supply more clocks Any Sync Output may be split to supply two other clocks This allows greater flexibility during installation GPSor CDMA R coer Master Slove Save y 33 0 Sync Out Red Sync In 4 IC 0 Sync Out Ped Sync In Sync Out rei More c J H J Black C J W a Black Black Clocks Master Clock includes Slave Clock includes Slave Clock includes GPS or CDMA Time Receiver Serial Sync Repeater Serial Sync Repeater Serial Sync Transmitter sisi ic In Slave Slave Slave Sync In Red Sync In ke e ff ww Sync Out Red Sync In Sync Out nea d 4 d q Block gJ 5 U Black Black
79. the local processor to receive and transmit data The data will not be repeated out the ST port unless the processor is configured to do so If the data is repeated a small delay will be introduced due to the time required to process the data When Mode 60 3 all serial data received on the SR port will be hardware repeated out the ST port and local time transmissions will also be sent out the ST port For example a large time zone display with digital lettering and IRIG B on the GPS port can repeat all commands received on the SR port out the ST port to other clocks and also send time out the ST port For a clock system it is recommended to set Mode 32 60 to 2 to immediately repeat the data Each clock will regenerate the data stream and no delays will be introduced For configurations where the local clock must transmit as in the case of a master clock then set Mode 32 60 1 to allow the clock to transmit See also Mode 32 46 3 11 5 10 040 Counter Timer Control Using Real Time Alarms 0 Disabled default 1 Enabled The real time alarm schedule entered using Modes 27 28 and 29 will be used to activate timer functions Mode 49 is used to specify the timer functions required Auto incrementing counters are also supported Alarm groups are not supported Mode 49 n 3 Counter Timer Reset Mode 49 n 4 Counter Timer Pause Resume same as Up button Mode 49 n 5 Timer Reset and Start same as Timer Control button For
80. to daylight time This value is used by Mode 24 code 21 Both modes 52 7 and 52 8 must be set to the desired day of the year See also Mode 45 32 to define new daylight saving rule Mode 45 32 must be set to 0 to enable this mode otherwise use Mode 45 32 to enable rule base switching Custom Julian Standard Time Switch User Defined 21 Enter the day of the year to switch from daylight time to standard time This value is used by Mode 24 code 210 Both modes 52 7 and 52 8 must be set to the desired day of the year See also Mode 45 33 to define new daylight saving rule Mode 45 33 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 113 RT EE First Menu Level Mode Number Second Menu Level Mode Description and Instructions must be set to 0 to enable this mode otherwise use Mode 45 33 to enable rule base switching Custom Julian Daylight Time Switch User Defined 22 Enter the day of the year to switch from standard time to daylight time This value is used by Mode 24 code 22 Both modes 52 9 and 52 10 must be set to the desired day of the year See also Mode 45 34 to define new daylight saving rule Mode 45 34 must be set to 0 to enable this mode otherwise use Mode 45 34 to enable rule base switching Custom Julian Standard Time Switch User Defined 22 Enter the day of the year to switch from daylight time to standard time This value is
81. used by Mode 22 code 20 Both modes 52 9 and 52 10 must be set to the desired day of the year See also Mode 45 35 to define new daylight saving rule Mode 45 35 must be set to 0 to enable this mode otherwise use Mode 45 35 to enable rule base switching Custom Julian Daylight Time Switch User Defined 23 Enter the day of the year to switch from standard time to daylight time This value is used by Mode 24 code 23 Both modes 52 11 and 52 12 must be set to the desired day of the year See also Mode 45 36 to define new daylight saving rule Mode 45 36 must be set to 0 to enable this mode otherwise use Mode 45 36 to enable rule base switching Custom Julian Standard Time Switch User Defined 23 Enter the day of the year to switch from daylight time to standard time This value is used by Mode 24 code 23 Both modes 52 11 and 52 12 must be set to the desired day of the year See also Mode 45 37 to define new daylight saving rule Mode 45 37 must be set to 0 to enable this mode otherwise use Mode 45 37 to enable rule base switching Custom Julian Daylight Time Switch User Defined 24 Enter the day of the year to switch from standard time to daylight time This value is used by Mode 24 code 24 Both modes 52 13 and 52 14 must be set to the desired day of the year See also Mode 45 380 to define new daylight saving rule Mode 45 38 must be set to 0 to enable this mode otherwise use Mode 45 38 to enable rule base switching Custom
82. whether based on contract tort statute fraud misrepresentation or any other legal or equitable theory the Claim shall be resolved solely and exclusively by arbitration by the AAA Institute for Dispute Resolution AAA in accordance with this paragraph and the AAA Rules for Non Administered Arbitration to the extent such rules do not conflict The arbitrator shall strictly limit discovery to the production of documents directly relevant to the facts alleged in the notices of arbitration and defense and if depositions are required three 3 depositions of no longer than three 3 hours each for each Party If an evidentiary hearing is held each Party s presentation of its case shall be limited to three 3 days Requests for temporary injunctive relief may be submitted to a court of competent jurisdiction if the arbitrator has not yet been appointed but the arbitrator shall have the authority to modify any injunctive relief granted by such a court The arbitration award shall be made final within six 6 months of Commencement and may be entered by either Party in any court having competent jurisdiction Each Party shall bear its own expenses but those related to the compensation of the arbitrator shall be borne equally The existence and contents of the entire arbitration shall be maintained by all participants as confidential except as provided In no event shall this provision be deemed to require either Party to arbitrate any Claim includ
83. wire If the clock is configured as a master to send sync data once per second you will see a momentary voltage drop using an analog meter Digital meters may not be fast enough to detect the sync pulse If the clock is configured as a repeating slave it will only send sync data when sync data is received In other words it is configured to repeat all sync data received LED sync detector A common LED light emitting diode may be used to detect the presence and polarity of sync data Connect the anode of the LED to the red Output sync wire and the LED cathode to the 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 140 FT et EEN black Output sync wire On most 5mm LED s the anode lead is the longer of the two leads The LED should continuously illuminate If the clock is configured to transmit the LED should blink off momentarily when the sync data is sent If the LED polarity is reversed the LED will remain off When the clock sends sync data the LED will blink momentarily PC Clock Serial Interface Adapter package includes Serial Adapter 9 to 25 pin adapter software CD installation and operating instructions this sheet The serial adapter draws its power directly from the serial port No AC power module is required Example 1 Send time date from PC to CLOCK S e RS 232 Q
84. 0 Do not stop the timer at the end time 2 Mode 20 1 12 Display minutes and seconds 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com iin eee N 3 Mode 37 9 5 Use the leading edge to start and stop the timer Wait five seconds before allow the start button to stop the timer 4 Mode 37 19 1 When the timer is stopped pressing the Start button will reset the timer and start it running Elapsed days since last accident or incident on a four digit display Up timer starting at 12 00 July 10 2000 This assumes the starting date is older than the current date Mode 9 12 00 set starting hour and minutes Mode 32 18 1 enable auto timer restart after power failure Mode 44 1 07 10 starting month and day Mode 44 2 2000 starting year e Et Elapsed days hours minutes and seconds since last accident or incident using a twelve digit display Up timer starting at 12 00 July 10 2000 This assumes the starting date is older than the current date Set the current time using the up and or down buttons Mode 1 set the current month and day Mode 2 set the current year Mode 18 3 number of four digit displays Mode 37 34 21 display elapsed days on first display default Mode 37 35 2 display hours and minutes default Mode 37 36 1 display seconds on third display Mode 32 18 1 enable auto timer restart after power
85. 0 9d 3f bd bl n Connect ME 1192 168 42 225 00 40 94 39 da 96 Connect ME j ania 192 168 42 103 00 40 9 45 a1 08 Connect ME 192 168 42 68 00 40 9 3 9a b4 Connect ME e 192 168 15 52 00 40 9d 3a 5a 41 Connect ME Reboot Device 192 168 11 20 00 40 94 3f c7 da Connect ME peal Ui 192 168 42 228 00 40 9 39 d7 01 BRG Connect ME Refresh List 192 168 42 73 00 40 94 39 c2 9d BRG Connect ME 192 168 15 51 00 40 9d 39 d6 72 BRG Connect ME Close The finder exe program is a software tool that can be used to locate the Ethernet interface just about anywhere on the local network However it cannot be used to configure the interface Compare the MAC address on the product label with those listed on the finder exe program If there is a match then the IP address will be listed next to it 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 123 800 295 0220 Once the IP address is discovered click on the desired address to configure Then click on the Browse button to access the configuration menu where the IP address net mask and gateway address can be entered Another method of configuring the Ethernet interface is to connect the PC directly to the Ethernet interface using a special cross over cable Later model computers will automatically detect the need to cross over the signal pairs All network connections must be disabled on the computer except
86. 0 MHz wireless systems dB o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions O disabled default 1 enabled Strip spaces from message board data inserted by the control program to overcome problem with 1707 type receivers with a buffer overrun issue Message Board Command Acknowledge O disabled 1 enabled default Acknowledge commands send from the command console to the master transmitter by sending an acknowledge from the master transmitter to the command console If time or message commands are not acknowledged the command console will produce a chime alert sound To obtain a command acknowledgement across subnets set the Clock response IP address to the IP address of the control computer Alarm Schedule Group Assignment Assigns each alarm setting to an alarm schedule group default 1 See also Mode 37 1 Active Alarm Schedule Setting Mode 37 1 0 will cause the date ranges to be used to determine which alarm schedule is active Date ranges for each alarm schedule are set in Modes 53 54 55 and 56 Alarm group 1 is different than the other 19 alarm groups If no date range is active then group is the default This feature reduces the number of alarm entries required in some schedule situations In Tiger version 3 75 and later the number of alarm entries has expanded from 100 to 1000 The 1000 alarm entries are stored in 10 different schedules of 100 entries each
87. 2 The format is MMRD where MM month 1 12 R instance of the select day of the week 1 5 5 last instance D day of the week 1 7 where 1 Monday and 7 Sunday For example 357 represents the last Sunday in March or 1117 represents the First Sunday in November If the value gt 2000 then the right two digits represent the day of the month The left two digits minus 20 equal the month For example March 15th 2315 April 1st 2401 The day of the year derived from this rule is stored in Mode 52 9 If the DST date is a fixed day i e 15 of the month then set this mode to 0 and enter the Julian day into Mode 52 9 instead 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 105 Deeg EE gC First Menu Level Mode Number Second Menu Level 111 3231 111 3231 111 3231 111 3231 Mode Description and Instructions See Mode 24 n 22 and Mode 45 35 Custom Daylight Saving Rule Ending Value for Mode 24 n 22 ver 4 64 Default 0 Values for rule driven custom daylight saving time for Mode 24 n 22 The format is MMRD where MM month 1 12 R instance of the select day of the week 1 5 5 last instance D day of the week 1 7 where 1 Monday and 7 Sunday For example 357 represents the last Sunday in March or 1117 represents the First Sunday in November If the value gt 2000 then the right two digits represent the day of t
88. 293 9393 sales brgproducts com www brgprecision com 112 RT See First Menu Level Mode Number Second Menu Level Mode Description and Instructions Custom Daylight Time Switch User Defined 10 Enter the day of the year to switch from standard time to daylight time This value is used by Mode 24 code 10 Both modes 52 1 and 52 2 must be set to the desired day of the year See also Mode 45 20 to define new daylight saving rule Mode 45 20 must be set to 0 to enable this mode otherwise use Mode 45 20 to enable rule base switching For U S Spring switch to Daylight Saving Time 2008 69 2009 67 2010 73 2011 72 2012 71 2013 69 2014 68 2015 67 2016 73 2017 71 Custom Julian Standard Time Switch User Defined 10 Enter the day of the year to switch from daylight time to standard time This value is used by Mode 24 code 10 Both modes 52 1 and 52 2 must be set to the desired day of the year See also Mode 45 21 to define new daylight saving rule Mode 45 21 must be set to 0 to enable this mode otherwise use Mode 45 21 to enable rule base switching For U S Fall switch to Standard Time 2008 307 2009 305 2010 311 2011 310 2012 309 2013 307 2014 306 2015 305 2016 311 2017 309 Custom Julian Daylight Time Switch User Defined 11 Enter the day of the year to switch from standard time to daylight time This value is used by Mode 24 code 11 Both modes 52 3 and 52 4 must be set to the desired day of the yea
89. 3 9393 sales brgproducts com www brgprecision com ee 800 295 0220 shipment or waiting for the full shipment The firmware license may be suspended limiting functionality of the equipment if payment is not received within 90 days Pricing BRG Precision Products reserves the right to change prices without prior notification Prices do not include taxes and BRG reserves the right to arrange for insurance on all orders The courts of Sedgwick County Kansas will have exclusive jurisdiction and venue over any disputes arising from any sale by BRG and customer and Buyer consent to personal jurisdiction of the federal and state courts located in Sedgwick County Kansas If legal action is brought by BRG for the collection of any amount owed or due to any other dispute the prevailing party will be entitled to recover its reasonable attorneys fees and costs incurred These items constitute the entire agreement between BRG and customer regardless of any additional or conflicting terms on customer s purchase order or other documentation which are objected to or any prior discussions or usages of trade All sales by BRG are made only on the terms and conditions contained herein 600 N River Street Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com iin eee BRG Control Software License Agreement BRG Control Software Copyright 2000 BRG Precision Products Inc IMPORTANT
90. 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 102 Deeg EE gC First Menu Level Mode Number Second Menu Level 111 3231 Mode Description and Instructions MMRD where MM month 1 12 R instance of the select day of the week 1 5 5 last instance D day of the week 1 7 where 1 Monday and 7 Sunday For example 357 represents the last Sunday in March or 1117 represents the First Sunday in November If the value gt 2000 then the right two digits represent the day of the month The left two digits minus 20 equal the month For example March 15th 2315 April 1st 2401 The day of the year derived from this rule is stored in Mode 52 3 If the DST date is a fixed day i e 15 of the month then set this mode to 0 and enter the Julian day into Mode 52 3 instead See Mode 24 n 10 and Mode 24 n 11 See also Mode 45 20 Mode 45 21 and Mode 45 23 Custom Daylight Saving Rule Ending Value for Mode 24 n 11 Default 0 Values for rule driven custom daylight saving time for Mode 24 n 11 The format is MMRD where MM month 1 12 R instance of the select day of the week 1 5 5 last instance D day of the week 1 7 where 1 Monday and 7 Sunday For example 357 represents the last Sunday in March or 1117 represents the First Sunday in November If the value gt 2000 then the right two digits represent the day of the month The left two digits minus 20 equal the month For ex
91. 36 1 46 set timer display format to minutes and seconds Mode 36 2 48 set timer display format to minutes and seconds 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com eg essa TE EE Hospital Code Blue timer with four digit display Normally display real time hours and minutes When the code blue button is pressed or code blue line is turned on switch to up timer mode set the display to minutes and seconds reset the timer start counting up from zero Pressing the code blue button again will have no effect until the timer is reset back to real time Press the reset button once to stop the timer Pressing the reset button again will have no effect unless it is held down for more than five seconds at which time it will return to real time display The display will remain frozen for 30 minutes After that it will automatically return to real time display Mode 23 1 24 set the display to 24 hour format Mode 13 0 allow the timer to pass through the end time which defaults to 0 00 Mode 32 4 2 stay in timer mode until pause timeout Mode 32 5 0 set timer to up direction Mode 32 6 3 code blue button will start the timer Further presses will have no effect until the timer is reset back to real time Mode 32 7 30 stay in timer mode for 30 minutes after timer is stopped then return to real time display Mode 36 1 12 set timer disp
92. 4 1 activate relay when timer starts Mode 32 26 1 enable warning relay Mode 37 12 1 turn off relay when timer stops Mode 37 14 3 enable Change Start Change End buttons C0 SON Oe eg 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 800 295 0220 Green Yellow Red light indicator with down timer starting at 1 30 seconds and counting down to zero then stopping When the timer is started the red light goes out and the green light illuminates When the timer gets down to 1 minute the green light goes out and the yellow light illuminates When the timer is stopped or paused the red light illuminates Mode 7 0 01 timer Starting hours and minutes Mode 8 30 timer Starting seconds Mode 14 3 set to down timer mode Mode 20 1 12 display minutes and seconds Mode 32 26 2 enable three light operation Mode 43 1 4 enable optional secondary channel for warning light Mode 43 3 30 timer warning alarm seconds yellow light enabled Soy ee de 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BBG ll We New Year s Timer Display Type 6 discrete digits Tiger Processor Version 3 59 or later Operation The timer will display real time hrs min sec On 12 31 2005 at 22 59 59 the display will switch from real time to down timer mode The
93. 53 Hours worked per year Mode A3 p eee eee 99 Pulsed output individual and auto start Mode 34 66 Increment amount Mode A5 A 99 Schedule date range beginning mon day Mode 53 Increment button debounce Mode 45 3 ee 99 113 People auto salary counter Mode 37 27 75 Schedule date range beginning year Mode 55 114 Salary amount Mode A8 1 99 Schedule date range ending mon day Mode 54 114 Stop Counter auto Mode 13 oo eee 44 Schedule date range ending year Mode 56 114 Date Schedule group assignment Mode 38 eee 97 Change the Month and Day Mode 1 43 Schedule enable disable alarm schedule Mode 32 Change the Year Mode 7 43 EE E 57 Daylight Savings Set day of week code Mode 20 49 Indicator Mode 21 70 Set hours and minutes Mode 27 00 eee 49 Daylight Savings Set seconds Mode 28 49 Time Time zone source Mode 2124 73 Zone Daylight Savings rule Mode 24 47 Toggle alarm on off Mode A0 107 Daylight Savings Warning alarm display blink rate Mode 43 5 98 Custom daylight savings switch A Mode 52 1 112 Warning alarm duration Mode A3 98 Daylight Savings Warning alarm hours and minutes Mode 43 2 98 Custom standard time switch A Mode 52 2 112 Warning alarm mode Mode A3 1 98 Daylight Savings Warning alarm seconds Mode A3 3 98 Custom daylight savings switch B Mode 52 3 112 Alarm Confeurapon 36 Daylight Savings
94. 6 Enable or Disable master slave alarm function O disabled default 1 enabled Mode 34 Individual Alarm Pulse Control Mode 37 1 Active Alarm Schedule This parameter determines which of the ten 0 98 alarm schedules is active Default 1 Mode 37 2 Panic Alarm using the optional Code Blue line Mode 39 1 Panic Alarm duration Mode 38 Alarm schedule is assigned to each 1 99 specific alarm setting Default 0 Mode 34 n 99 Auto starts the code blue timer from a real time alarm setting Mode 53 Set beginning month day in alarm schedule date range Mode 54 Set ending month day in alarm schedule date range Mode 55 Set beginning year in alarm schedule date range Mode 56 Set ending year in alarm schedule date range Mode 59 Enable four channel alarm output Must also set Mode 32 26 2 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com OKO EARS rays 0 7470 Err Alarm Configuration Worksheet Alarm Mode 27 Mode 28 Mode 29 Mode 5 Mode 30 Mode 32 13 Mode 34 Mode 38 Mode 49 Mode 59 Positio Alarm Alarm alarm Day Alarm Individual Alarm Pulse Individual Alarm Toggle Four n Hours and Seconds Code Output Alarm Control Alarm Schedule Alarm Channel 1 99 Minutes required Duration Output Pulse Number on off Relay required Duration Control Default 0 1 on 2 off Output 1 2 4 8 O CO Y DI MN A uN rR
95. 62 7 and Mode 37 76 0 When switching between daylight saving and standard time the master transmitter will not broadcast time from 8 00pm to 1 00am the following day on the day to switch between daylight saving and standard time The clock will begin changing to the new time when the clock hands are at 2 04 In addition to Mode 24 1 14 Modes 45 20 and Mode 45 21 must be set to the correct DST rule Transmit Time to Moving Message Displays O disabled 1 default Transmit the time and date to all moving message displays hourly at the number of seconds after the hour determined by Mode 37 75 default 10 every day over wireless connection 2 Transmit the time and date to all moving message displays at 02 00 10 and 03 00 10 every day over wireless connection Transmit Sync Status to Wireless Signal Monitor O disabled 1 enabled default Transmits master clock sync receive status changes to the wireless signal monitor If sync status from GPS CDMA or NTP changes a command will be sent to the wireless monitor Configure signal monitor to use 0800828 only Wireless Ethernet Sync Indicator Delay 30 disabled default This value determines the number of minutes between a change in sync status and resetting the sync status indicator The sync status indicator is always set immediately For example if Mode 32 2 4 to blink the colon when sync is lost Mode 37 65 determines the delay in minutes before the colon begins blinking after a loss
96. 800 295 0220 pre Standard Display Modes Multiple clocks may be placed adjacent to one another to form a comprehensive display For example one clock could display hours minutes seconds while a second clock could display the month day and four digit year Not all of the following features are included on every clock Some operating modes must be specifically requested There is no extra charge for the following features Hours Minutes 4 or 8 digit display Hours Minutes Seconds 8 digit display Hours Minutes Seconds Hundredths 8 digit display Hours Minutes Month Day 8 digit display Hours Minutes four digit year 8 digit display Hours Minutes day of the year 8 digit display Hours Minutes Hours Minutes two zones 8 digit display Hours Decimal Minutes 4 or 8 digit display Minutes Seconds 4 or 8 digit display Seconds centered 4 or 8 digit display Day of the year 4 or 8 digit display Day of the year plus last digit of the year 4 or 8 digit displays Julian date 7 digits 8 digit display Julian date last four digits 4 or 8 digit display Month Day Year 4 or 8 digit display Up Down Elapsed Time Seconds centered 4 or 8 digit display Up Down Elapsed Time Hours Minutes 4 or 8 digit display Up Down Elapsed Time Minutes Seconds 4 or 8 digit display Up Down Elapsed Time Hours Minutes Seconds 8 digit display Up Down Elapsed Time Hours Minutes Seconds Hundredths 8
97. Daylight Savings Auto counter pause mode Mode 37 31 76 Custom standard time switch B Mode 52 4 113 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BiG ea EEN Defaults Restore Mode 0 1 107 Digital Lettering Character sequence Mode 51 5000 eects 111 Character String Mode 311 108 Digital lettering default time source Mode 37 22 73 Frame rotation speed Mode 51 4000 eee 111 Number of digits installed Mode 51 2 110 Operating Mode Mode 313 110 Time zone source for special char Mode 58 111 Type of display used Mode 22 34 62 Display Daylight Savings indicator Mode 37 7 70 Display 12 24 hour format Mode 28 47 Absolute value on counter value Mode 32 39 59 Actual Goal difference Mode 32 53 s es 62 Blinking individual Mode 20 48 Brightness auto Mode 32 14 eee eeeeeeseeceeeeees 54 Colon enable disable Mode 27237 62 Driver type installed Mode 32 27 oes 57 Format Mode 20 45 Format when switching from timer Mode 32 45 60 Intensity auto Mode 27114 54 Intensity individual Mode 28 48 Leading zero blanking Mode 32 28 1 00 0 eee 58 Number of displays Mode 18 45 Refresh delay Mode 213 69 Refresh display before sync xmit Mode 32 41 59 Timer control display format Mode 208 67 Display Counter least four digits Mode 2118 72 Display Enable disable PM indicator Mod
98. ED BY LAW 4 End User Indemnification Licensee shall indemnify and hold harmless AT amp T its Subsidiaries and authorized representatives against any claims suits or proceedings asserted or commenced by any third party and arising out of or relating to Licensee s or its customer s use of the Client SDK and or AT amp T Natural Voices Software or the use in violation of the terms of this Agreement or any license agreement with Wizzard of Client SDK and or AT amp T Natural Voices Software licensed from Wizzard This obligation shall include indemnifying against all damages losses costs and expenses including attorneys fees incurred by AT amp T its Subsidiaries and authorized representatives as a result of any 8 such claims suits or proceedings including any costs or expenses incurred in defending against any such claims suits or proceedings 5 Dispute Resolution This Agreement shall be governed by the laws of the State of New York U S A without regard to its conflicts of law principles Any suit and or arbitration proceeding relating to any Claim shall be brought and prosecuted only in New York New York Except as provided in this paragraph any and all controversies or claims of any nature arising out of or relating to this 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 800 295 0220 Agreement or the breach termination or validity thereof
99. GPS port For example if an Ethernet interface is connected to the SR ST port and the GPS port is used to send serial sync data set Mode 32 15 7 to set both ports to 9600 baud and Mode 32 48 0 Menu Lockout Timer 1 default This mode determines the number of minutes from the last menu access before the buttons are locked out again This mode can be used in conjunction with the remote control address Mode 37 29 See also Mode 32 42 and 32 55 Temperature Sensor 0 disabled default 1 enable temperature sensor 2 enable temperature sensor and send temp data over serial sync port 3 receive temperature data from serial sync port Available in real time only and with serial wire sync and Ethernet UDP but not PL sync See also Mode 45 16 and Mode 46 1 See also display modes 24 25 26 32 33 and 38 Timer Transmit Control O disabled default 1 enable using the SR ST port 2 enable using the GPS port This mode allows timer control commands to be sent out the serial sync ports to control other timers The timers will not be synchronized again once they are started For timers that require synchronization to the second over long periods the ultra high precision oscillator option is recommended When the Reset button is pressed the Start End and warning times will be sent along with a command to reset the timer Mode 32 12 serial sync transmit should be disabled otherwise it may interfere with the commands When Mo
100. GPS port from a remote GPS receiver over the air 5 receive time on SRST port from a remote GPS receiver using the Ethernet cable SRST port NTP time and other standard time packets will be ignored 6 receive standard time packets NTP over the Ethernet port and time packets over the air from a remote GPS receiver The configuration provides a redundant time source If one of the time sources provides incorrect time the master and slave clocks may jump periodically between the two times This configuration does not affect the reception of commands only the reception of 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BR o FNO o First Menu Level Mode Number Second Menu Level 71 1 24 time source 1 99 alarm setting 0 94 seconds 95 reboot 96 97 98 su nrise sunset alarms 99 code Mode Description and Instructions time broadcasts NMEA GPS Operation 0 Configure GPS receiver to send NMEA GPS data continuously 1 default Configure GPS receiver to send NMEA GPS data once every five seconds at the top of the hour for one minute or until a valid time update is received Once the GPS receiver is connected to a clock with Mode 32 69 set to 1 the GPS receiver will be disabled until the top of the hour The GPS receiver will no longer work with older clocks that expect a continuous data stream To reconfigure a GPS receiver t
101. Menu Level Mode Description and Instructions 7 jjjj lower four digits of Modified Julian date 8 x j j j upper three digits of Modified Julian date 9 xxxx blank display 10 xx ss xx seconds where xx is blank 11 ss 99 seconds hundredths of seconds 12 mmiss minutes seconds 13 bs sb seconds centered in a four digit display 14 dd dy day of the year plus last digit of the year 15 yddd last digit of the year plus day of the year 16 nnxd nn number of GPS satellites being tracked d data reception indicator 17 dd mm day month for international use 18 hh mm gt month day alternating hours min and month day 19 hh mm gt ddd alternating hours min and Julian date day of the year 20 hh mm hours and decimal minutes separated by a decimal point 21 dddd elapsed days for timer operation See also Mode 35 and Mode 37 48 22 hhhh elapsed hours for timer operation See also Mode 35 and Mode 37 48 23 hh mm gt mm dd gt yyyy alternating hours minutes month day and year 24 nnnF Temperature in degrees F See also Mode 32 50 25 nnnC Temperature in degrees C See also Mode 32 50 26 hh mm gt nnnF gt nnnC Alternating hours minutes temp F and temp C See also Modes 37 41 37 42 37 43 37 13 and 32 50 27 hh mm hours up to 99 and minutes for timer operation set mode 32 2 4 and use Mode 35 2 to set the starting value 28 ss xx se
102. Mode 45 31 Custom Daylight Saving Rule Ending Value for Mode 24 n 20 ver 4 64 Default 0 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 104 nae SC First Menu Level Mode Number Second Menu Level 111 3231 111 3231 111 3231 Mode Description and Instructions Values for rule driven custom daylight saving time for Mode 24 n 20 The format is MMRD where MM month 1 12 R instance of the select day of the week 1 5 5 last instance D day of the week 1 7 where 1 Monday and 7 Sunday For example 357 represents the last Sunday in March or 1117 represents the First Sunday in November If the value gt 2000 then the right two digits represent the day of the month The left two digits minus 20 equal the month For example March 15th 2315 April 1st 2401 The day of the year derived from this rule is stored in Mode 52 6 If the DST date is a fixed day i e 15 of the month then set this mode to 0 and enter the Julian day into Mode 52 6 instead See Mode 24 n 20 and Mode 45 30 Custom Daylight Saving Rule Starting Value for Mode 24 n 21 ver 4 64 Default 0 Values for rule driven custom daylight saving time for Mode 24 n 21 The format is MMRD where MM month 1 12 R instance of the select day of the week 1 5 5 last instance D day of the week 1 7 where 1 Monday and 7 Sunday For example 357 repres
103. Mode 51 1 AACCZZDDDDDDDDDDDDDDDDXXXXXXXXXX CC 32 ZZ 1 16 sixteen character zone position DDDDDDDDDDDDDDDD sixteen character title Digital 24 Char Zone Lettering Mode 51 1 AACCZZDDDDDDDDDDDDDDDDDDDDDDDDxx CC 33 ZZ 1 10 twenty four character zone position DDDDDDDDDDDDDDDDDDDDDDDD twenty four character title Digital 9 Char Zone Lettering Mode 51 1 I AACCZZDDDDDDDDDxxxxxxxXXXXXXXXXXX CC 34 ZZ 1 28 nine character zone position DDDDDDDDD nine character title Digital 5 Char Zone Lettering Mode 51 1 I AACCZZDDDDDXXXXXXXXXXXXXXXXXXXXX CC 38 ZZ 1 51 five character zone position DDDDD five character title Digital 10 Char Zone Lettering Mode 51 1 AACCZZDDDDDDDDDDxxxxxxXXXKXXXXXXX CC 37 ZZ 1 25 ten character zone position DDDDDDDDDD ten character title Digital 15 Char Zone Lettering Mode 51 1 1 AACCZZDDDDDDDDDDDDDDDxxxxxxxxxXxXxX CC 36 ZZ 1 17 fifteen character zone position DDDDDDDDDDDDDDD ten character title Digital 20 Char Zone Lettering Mode 51 1 AACCZZDDDDDDDDDDDDDDDDDDDDxxxxxx CC 20 ZZ 1 12 twenty character zone position DDDDDDDDDDDDDDDDDDDD twenty character title U 600 N River Street Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com 146 Ees 800 295 0220 12 JBRG Digital Lettering Padding Mode 51 AACCZZZXXXXXXXXXXXXXXXXXXXXXXXX CC 75 ZZZ
104. Mode Number Second Menu Level Mode Description and Instructions 1 or 2 constant contact closure 3 one time start from real time 0 A momentary contact closure will switch the display from real time to timer mode reset the timer then starts the timer running Each time the code blue line is pulsed the timer resets and restarts A value of either 1 or 2 will cause the timer to run as long as the contact is closed and stop the timer when contact opens 1 timer will be reset each time the timer is started 2 time will accumulate and will not reset when timer started Mode 32 6 overrides the start button The stop reset button only resets the timer in this mode 3 allows the timer to start from real time once only The code blue line may be momentarily closed or constantly closed to start the timer Once out of real time and into timer mode the code blue button has no effect The start and reset buttons work normally when a value of 3 is used Mode 34 n 99 auto starts code blue timer from a real time alarm setting See also Mode 26 7 and 26 8 Timer to Real Time Switch Delay This parameter determines if or when the timer will resume real time display after the timer is paused Resetting the timer will cause it to remain in timer mode For example pressing Up or Down while the timer is running will pause the timer and it will return to real time after the designated delay period But pressing Down again will reset the timer
105. R BE LIABLE FOR ANY INDIRECT INCIDENTAL CONSEQUENTIAL PUNITIVE RELIANCE OR SPECIAL DAMAGES INCLUDING WITHOUT LIMITATION DAMAGES FOR LOST PROFITS LOSS OF ADVANTAGE LOSS OF SAVINGS LOSS OF REVENUES OF ANY KIND INCREASED COST OF OPERATIONS BUSINESS INTERRUPTION OR LOSS OF INFORMATION EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES IF THE AT amp T NATURAL VOICES SOFTWARE DOES NOT PERFORM SUBSTANTIALLY IN ACCORDANCE WITH THE ACCOMPANYING DOCUMENTATION AND LICENSEE PROVIDES LICENSOR WITH NOTICE OF SAME DURING THE WARRANTY PERIOD OR IN THE EVENT OF ANY BREACH OF THIS AGREEMENT LICENSEE S EXCLUSIVE REMEDY SHALL BE THAT LICENSOR SHALL EITHER AT LICENSOR S OPTION RETURN THE ROYALTY PAYMENT OR REPLACE THE AT amp T NATURAL VOICES SOFTWARE For the purposes of this paragraph only references to Licensor and Licensee shall be deemed to include Licensor s and Licensee s subsidiaries affiliates employees directors officers licensees representatives and subcontractors suppliers customers and distributors BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF THE FOREGOING WARRANTIES OR LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES THE ABOVE LIMITATIONS MAY NOT APPLY TO LICENSEE IN THE EVENT APPLICABLE STATE OR FEDERAL LAW DOES NOT ALLOW THE COMPLETE EXCLUSION OR LIMITATION OF LIABILITY OF CLAIMS AND DAMAGES AS SET FORTH IN THIS AGREEMENT LICENSOR S LIABILITY IS LIMITED TO THE GREATEST EXTENT PERMITT
106. RC100TZ master clock This mode allows wireless analog clocks to be used as a time zone display An RC100TZ master clock is configured to wirelessly send time updates to the analog clocks Up to 18 unique zones are supported with an unlimited number of analog clocks Each analog clock receives and repeats the time transmissions Repeaters are available to increase the coverage area of the clock system All BRG analog clock movements are supported The RC100TZ requires Tiger processor version BRG_analog_tz_475 or later The CEL radio firmware is the same as used in the RC100 The RC100TZ does not support primary and secondary master clock operation The RC100TZ defaults to radio channel 10 The default time source for the RC100TZ master clock is Ethernet NTP The RC100TZ cannot use a GPS or CDMA time source that is being used to support a DuraTime system on another channel DuraTime GPS and CDMA receivers can be used if configured on the same channel as the RC100TZ Analog slave clocks in a time zone configuration require CEL firmware BRG_analo_TZ_slave_zone_NN_V11 py where NN is the zone number of the clock Every time packet includes a zone identifier If an analog clock receiving the time packet matches the zone indicated it will use the time to update the clock Set Mode 18 and Mode 37 78 to the desired number of zones The default is 8 which will support 8 or less zones without change Many of the parameters that must be configured i
107. S FOR A PARTICULAR PURPOSE ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD NO WARRANTIES EXPRESS OR IMPLIED WILL APPLY AFTER THIS PERIOD IN NO EVENT WILL BRG PRECISION PRODUCTS INC BE LIABLE FOR ANY SPECIAL INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES LOSSES COSTS OR EXPENSES HOWEVER ARISING WHETHER IN CONTRACT OR TORT INCLUDING WITHOUT RESTRICTION ANY ECONOMIC LOSSES OF ANY KIND ANY LOSS OR DAMAGE TO PROPERTY ANY PERSONAL INJURY ANY DAMAGE OR INJURY ARISING FROM OR AS A RESULT OF MISUSE OR ABUSE OR THE INCORRECT INSTALLATION INTEGRATION OR OPERATION OF THE PRODUCT SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU BRG Precision Products Inc neither assumes nor authorizes any other person to assume for it any other liability in connection with the repair or replacement of the Product 6 Claim Limits Claims are limited to repair or replacement or if in BRG Precision Products Inc s discretion that is not possible to reimbursement up to the purchase price paid for the Product In no event will BRG Precision Products Inc s liability under this Agreement exceed the purchase price paid for the Product 7 Cancellation You may cancel this Agreement by providing to BRG Precision Products Inc written notice of your wish to cancel 8 Insurance This Agreement is not a contract of insura
108. Salary Calculator for auto incrementing salary counter See Mode 45 6 and 45 7 5 Alternate Start Time If the Reset line is open Mode 27 1 sets the Starting hours and minutes Mode 28 1 sets the Starting seconds If the Reset line is closed to ground Mode 27 2 set the Starting hours and minutes Mode 28 2 sets the Starting seconds 6 Alternate End Time If the Change End line is open Mode 27 3 sets the Ending hours and minutes Mode 28 3 sets the Ending seconds If the Change End line is closed to ground Mode 27 4 set the Starting hours and minutes Mode 28 4 sets the Starting seconds 7 Alternate Start End Times If the Reset line is open Mode 27 1 sets the Starting hours and minutes Mode 28 1 sets the Starting seconds If the Reset line is closed to ground Mode 27 2 set the Starting hours and minutes Mode 28 2 sets the Starting seconds If the Change End line is open Mode 27 3 sets the Ending hours and minutes Mode 28 3 sets the Ending seconds If the Change End line is closed to ground Mode 27 4 set the Starting hours and minutes Mode 28 4 sets the Starting seconds 8 Alternate Starting Times This mode provides up to four alternate Starting times If the Reset line is open Mode 27 1 sets the Starting hours and minutes Mode 28 1 sets the Starting seconds If the Reset line is closed to ground Mode 27 2 set the Starting hours and minutes Mode 28 2 sets the Starting seconds If the Change End line is open Mode 27 3 set
109. The transmission standard requires that the time transmissions be within ten millionths of a second of the UTC time standard The spread spectrum CDMA radio signal is easily received inside buildings without the need for an external antenna as with GPS Generally speaking if you are able to use a cell phone even marginally in a specific location then the CDMA receiver will work The CDMA receiver must be deployed in a cellular IS 95 CDMA coverage area Cellular is a commonly used term that implies that the frequency band for the base station carrier transmissions is 824 895 Mhz Configuration The CDMA receiver is contained within the body of the clock with a small stub antenna on top Your time display should already be factory configured if equipped with a CDMA atomic time receiver This configuration can be changed at any time The following modes are useful when configuring the time display There are two types of CDMA receivers used standard and enhanced CDMA Standard COMA provides UTC and Enhanced CDMA provides local time Neither receiver provides daylight saving time information Mode 32 15 3 Enables standard CDMA reception and Mode 32 15 10 enables enhanced CDMA reception model MTSMC If this value is changed power down the clock for a few seconds and power it back up to initialize the CDMA receiver Mode 21 n n display position 1 24 This is the time offset from UTC It ranges from 12 to 12 Mod
110. When an array of clocks use frame rotation and each clock is to display a different synchronized frame a value of 2 24 may be used to determine what frame is used at startup All clocks would need to be powered up at the same time or a single clock can be powered up with the knowledge up what frame it will begin with Counter Display Mode Most Significant Four Digits Default counter display mode for the most significant four digits of an eight digit counter value default 40 See also Modes 36 and 37 15 Alpha Time Character Time Zone Source 0 24 0 disabled default This mode is used to specify which time zone is to be used for special alpha time characters Mode 51 6 is used to assign multiple unique time zone offsets to special alpha characters Mode 37 22 must be 0 for Mode 51 6 to take effect otherwise Mode 37 22 will override any Mode 51 6 settings See mode 51 1 for a list of special alpha time characters See also Mode 51 6 Serial Sync Data Protocol O seven data bits old protocol 3 default eight data bits new protocol Alarm Schedule Time Zone Source 1 default This mode determines which time zone will be used for alarm schedules Display Colon on Date Display Mode 53 0 disable default l enable Keypad or Thumb Wheel Switch Configuration Set Mode 32 15 5 to enable Thumbwheel or Keypad switches The optional Keypad or Thumb Wheel switch may be configured to perform a variety of functions Unpredi
111. XXX CC 21 ZZ 1 24 zone number VV 1 99 display format Zone Offset Mode 21 n AACCZZVVVXXXXXXXXXXXXXXXXXXXXXXX CC 22 ZZ 1 24 zone number VV 12 to 12 zone offset Display Pointer Mode 22 n I AACCZZVVXXXXXXXXXXXXXXXXXXXXXXXX CC 23 ZZ 1 24 zone number VV 1 24 display pointer 12 24 Hour Display Format Mode 23 n I AACCZZVVXXXXXXXXXXXXXXXXXXXXXXXX CC 24 ZZ 1 24 zone number VV 12 or 24 12 24 format Daylight Savings Code Mode 24 n AACCZZVVXXXXXXXXXXXXXXXXXXXXXXXX CC 25 ZZ 1 24 zone number VV 0 99 daylight savings code Force Time Offset Mode 33 n I AACCZZVXXXXXXXXXXXXXXXXXXXXXXXXX CC 26 ZZ 1 24 zone number V 0 5 force time offset code Timer Control Display Format Mode 36 n I AACCZZVVXXXXXXXXXXXXXXXXXXXXXXXX CC 27 ZZ 1 24 zone number VV 1 99 timer control display format Display Intensity Mode 3 AACCZZXXXXXXXXXXXXXXXXXXXXXXXXXX CC 28 ZZ 1 15 display intensity 600 N River Street Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com 145 dE 3800 295 0220 Individual Display Intensity Mode 25 n I AACCZZVVXXXXXXXXXXXXXXXXXXXXXXXX CC 29 ZZ 1 24 zone number VV 0 15 display intensity Digital 8 Char Zone Lettering Mode 51 1 1 AACCZZDDDDDDDDxxxxxxxXXXXXXXXXXXF CC 31 ZZ 1 32 eight character zone position DDDDDDDD eight character title Digital 16 Char Zone Lettering
112. XXXXXXXXXXXX CC 64 N 1 Disable Long Duration Timer Mode 32 18 0 I AACCNXXXXXXXXXXXXXXXXXXXXXXXXXXX CC 64 N 0 Utility Commands Save Current Parameters AACCXXXXXXXXXXXXXXXXXXXXXXXXXXXX CC 11 Store End User Configuration Mode 50 6 I AACCXXXXXXXXXXXXXXXXXXXXXXXXXXXX CC 12 Restore End User Configuration Mode 50 5 I AACCXXXXXXXXXXXXXXXXXXXXXXXXXXXX CC 13 Restore Factory Defaults Mode 50 1 AACCXXXXXXXXXXXXXXXXXXXXXXXXXXXX CC 71 Display Zone Location Numbers Mode 50 4 I AACCXXXXXXXXXXXXXXXXXXXXXXXXXXXX CC 14 Turn On All Numeric Segments Mode 50 3 AACCXXXXXXXXXXXXXXXXXXXXXXXXXXXX CC 15 Software Reset Mode 50 2 AACCXXXXXXXXXXXXXXXXXXXXXXXXXXXX CC 16 Idle Timer Display See Modes 37 34 37 35 37 36 AACCXXXXXXXXXXXXXXXXXXXXXXXXXXXX CC 17 Configuration Commands Timer Start Time Modes 7 8 AACCSSMMHHXXXXXXXXXXXXXXXXXXXXXX CC 53 SS second MM minute HH hour 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 144 ee 800 295 0220 BRG EE De Timer End and Long Timer Target Time Modes 9 10 AACCSSMMHHXXXXXXXXXXXXXXXXXXXXXX CC 52 SS second MM minute HH hour Set Operating Mode Mode 14 AACCNXXXXXXXXXXXXXXXXXXXXXXXXXXX CC 10 n operating mode 1 5 Display Format Mode 20 n I AACCZZVVXXXXXXXXXXXXXXXXXXXXX
113. a four digit display set display mode 20 1 to a value of 12 to display minutes and seconds Note how fast or slow the clock is compared to the time standard Enter the correction value into Mode 4 Use a negative value to slow the clock down and a positive value to speed the clock up For example of the clock is running 20 seconds fast in a month enter 240 20 seconds per month times 12 months into Mode 4 This will slow the clock down 20 seconds per month Mode 37 37 can be used to change the range used by Mode four to seconds per month Set the clock to the time standard and return the display mode back the original display mode used The calibration process may be used again in another month to further increase clock accuracy Absolute Accuracy Of course GPS and CDMA atomic time receivers afford the most accurate and reliable method of maintaining the correct time These receivers obtain the correct legally traceable U S time by receiving signals from the constellation of U S military satellites or CDMA transmitters 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com ee ae gu Time Zone Clock Configuration Your time zone clock has been configured to your specifications You may change this configuration at any time For accurate time zone information see http www timeanddate com If included the optional infrared remote control is shipped
114. al coverage Once enabled the time test will be transmitted to pagers at the top of every minute for Tiger version 4 00 and lower Tiger version 4 01 or later transmits the test data 3 times per minute at 0 20 and 40 seconds after the minute Version 4 07 and later transmits the string 00000111 The new field test receiver will receive this data string Quick Mode 5 will disable test mode Mode 37 50 0 Quick Mode 6 will enable test mode Mode 37 50 3 Timer Control Button Test Messages The timer control button may be used to send test messages in processor version W4 92 and later To send a test message momentarily press the timer control button Then use the Up and Down buttons to select a test mode Then momentarily press the timer control button again to send the test The following test modes are available Send the time and date to message boards Blank message boards Unblank message boards Send time format using orange characters Sent test message This is only a test Activate wireless speaker lights and audio amplifier Enable message 16 in message boards erase all message in message boards Sound the beeper in message boards Reset the message boards Send time format using red characters Send time format using green characters Send station identification using Morse code see also Mode 49 Send command to start countdown timer in digital clocks SOO SON eh E Wireless Analog Clock Transmit Point 600 N River St
115. ample March 15th 2315 April 1st 2401 The day of the year derived from this rule is stored in Mode 52 4 If the DST date is a fixed day i e 15 of the month then set this mode to 0 and enter the Julian day into Mode 52 4 instead See Mode 24 n 10 and Mode 24 n 11 See also Mode 45 20 Mode 45 21 and Mode 45 22 Temperature Sensor Samples 1000 default This value determines the number of temperature samples used to produce the average temperature displayed Reducing this value to increase the response time to temperature changes Digital Lettering Command Offset This value provides an offset to the starting position for the 5 10 15 and 20 character digital lettering commands For example if the first 25 positions contain five 5 digit special characters to display the hour and minute then character positions 26 through 75 could be used for five 10 character zone titles In this case Mode 45 25 would be set to 25 The control program could then send new zone titles using either the TZ6610 form or the ten character time zone form The first 25 positions containing the special characters would remain unchanged The Flexible Zone Title form can be used to configure the special characters in the first 25 characters Then the TZ6610 form or the Ten Character Title form can be used to change the zone titles without affecting the special characters Tiger version 3 71 or later is required Pager Password Requires four digit value
116. and 71 Ethernet UDP Time Synchronization Port The least significant four digits of the port address is displayed 10 000 will be added to the stored valued The default stored value is 6000 therefore the port address is 16000 Select mode 70 4 to send the stored value to the Ethernet interface See also Modes 45 10 45 11 70 and 71 Alarm Frequency O disabled 1 9999 seconds between alarms This mode is used with the Alarm Toggle Mode 49 During the period the alarm is normally toggled on the alarm can be turned on and off at a periodic rate Mode 45 13 determines how often the alarm activates within the toggle on period while Mode 5 determines the alarm duration GPS IRIG B and SMPTE Receiver Delay Correction 0 9999 milliseconds This mode cancels the reception delay introduced by the serial cable between the receiver and the clock One second is added to the time received the update is then delayed by the specified number of milliseconds before being displayed 50ms is the default The number of zones and or digital lettering can also affect the displayed time Alarm duration multiplier 1 default 9999 This value is a multiplier for the alarm duration values in Mode 5 and Mode 30 This feature allows much longer alarm duration times For example if Mode 5 3 and Mode 45 15 10 the alarm duration is 300 seconds or five minutes Thermostat 50 to 150 Fahrenheit or Celsius This mode is used to configure the thermos
117. ange the schedule from 0 10 then press Timer Control to save and exit Panic Alarm Button O not active default 1 code blue line toggles alert horn on and off Mode 39 1 optionally determines the number of seconds the alarm will sound before automatically turning off If the timeout value is 0 the alarm will sound until the code blue line is momentarily closed For alarms in real time mode this setting will cause the timer control button to act as a snooze button turning off the alarm before the alarm period has expired 2 alert horn will sound as long as code blue line is closed The Panic Alarm function overrides all other code blue functions This mode may used with real time alarms to turn off the alarm before the predefined alarm duration expires Sync Pulse Period This mode determines the frequency at which the clock sends or expects to receive sync pulses The values are O disabled default 1 receive or transmit once per day Example Send a 100 ms pulse at 3 00 am over radio sync using the alarm relay Mode 6 1 Mode 16 3 00 Mode 17 00 Mode 32 33 1 Mode 37 3 1 Mode 45 8 100 2 receive or transmit once per hour 3 receive or transmit once per minute 4 enable receiving bipolar minute impulse 5 enable receiving 59th minute sync set 21 1 0 24 1 0 6 enable receiving seconds impulse used for AC power line sync 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sale
118. arallel or an unlimited number of clocks if they include and input and output and are wired in series PC Clock USB Interface Adapter package includes USB Adapter USB patch cable software CD installation and operating instructions this sheet The USB adapter draws its power directly from the USB port No AC power module is required PC Clock USB Port Adapter ges Example 1 Send time date from PC to CLOCK S USB Data to Clock ce Se RX gt RX xe TX Se x BLACK SYNC RECEIVE SR Clock PC USB Port Adapter SYNC TRANSMIT ST SYNC WIRE TO MORE CLOCKS Example 2 Send time date from CLOCK to PC lt Data from Clock To PC s USB ia K SYNC WIRE TO Clock PC USB Port Adapter MORE CLOCKS SYNC TRANSMIT ST 600 N River Street Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com 139 iG NEE PC Serial RS232 RS422 Adapter 1c485 I Adapter This option allows the clock to be set by PC or the PC to be set by the clock A serial interface adapter is included for connecting the clock to a computer Simply attach the adapter to the clock sync line and plug into the PC s serial port Software is included for DOS Windows 3 x 95 98 NT ME XP and 2000 Once connected the time and date may be exchanged between the PC and clock s The scheduling program included with Windows can be configured to run the time send software anytime betwe
119. are 24 time sources and up to 24 four digit displays Mode 23 Position 12 24 Display Format Set 12 or 24 hour display format for each zone using this mode Mode 24 Position Daylight Savings Setting Set auto switching for daylight savings time using this mode for each time source The codes for various locations are O disable daylight time 1 U S Canada Bermuda 2 UK Ireland Scotland 3 Australia 4 Argentina 5 Israel 6 Brazil etc See Mode 24 in the mode definition table for other daylight savings codes Also daylight start and stop periods may be customized Mode 33 Position Incremental Time Zone Offset This mode optionally forces a 30 or 60 minute time advance for each respective zone 0 no advance default 1 30 minute advance 2 60 minute advance 3 30 minute advance during daylight savings time only 4 60 minute advance during daylight savings time only 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 800 295 0220 VI Time Zone Clock Configuration Examples Four zone display from left to right Pacific Mountain Central and Eastern time zones Mode 18 4 set the number of zones Mode 20 1 2 set zone display format to hours minutes Mode 20 2 2 set zone display format to hours minutes Mode 20 3 2 set zone display format to hours minutes Mode 20 4 2 set zone displ
120. ault 1 9 number of seconds to add to the time received This delay is used in conjunction with Mode 45 17 The value in Mode 32 40 is the number of seconds to add to the time received over serial sync communications A delay is then applied to add fractional seconds to the time received This will effectively cancel the delay caused by the time required to send the time over a serial communications line This mode will not work with once per second sync Once per minute sync or greater is recommended See also Mode 32 40 32 64 45 17 70 and 71 Refresh Display prior _ to Serial Data Transmission 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO o First Menu Level Mode Number Second Menu Level Display format number Mode Description and Instructions O enabled default 1 disabled When enabled the displays will be refreshed just prior to sending serial sync data Clock Address for PC Control Moving Message Marquee and Remote Control default 0 When sending control data to clocks individual clocks or moving message displays may be addressed by including the clock s address If the address value sent equals the value specified in this mode then the clock will accept the data packet For PC control all clocks may be addressed by sending address 0 For addressable remote control operation hold down the Mode button The di
121. ay format to hours minutes Mode 21 1 8 set Pacific offset from UTC Mode 21 2 7 set Mountain offset from UTC Mode 21 3 6 set Central offset from UTC Mode 21 4 5 set Eastern offset from UTC 10 Mode 22 1 1 point display position to the desired time source 11 Mode 22 2 2 point display position to the desired time source 12 Mode 22 3 3 point display position to the desired time source 13 Mode 22 4 4 point display position to the desired time source 14 Mode 23 1 24 set the display position to 24 hour display format 15 Mode 23 2 24 set the display position to 24 hour display format 16 Mode 23 3 24 set the display position to 24 hour display format 17 Mode 23 4 24 set the display position to 24 hour display format 18 Mode 24 1 1 set to U S daylight savings time 19 Mode 24 2 1 set to U S daylight savings time 20 Mode 24 3 1 set to U S daylight savings time 21 Mode 24 4 1 set to U S daylight savings time SO SN ON ee te Two zone display with digital zone lettering from left to right display Pacific and Mountain time and then after a five seconds display Central and Eastern time the time zones and the zone lettering will cycle through two sets of zone locations Mode 18 2 set the number of physical zones Mode 20 1 2 set zone display format to hours minutes Mode 20 2 2 set zone display format to ho
122. ay is then configured to turn on at 6 00am the display will illuminate Pressing the Timer Control button while the display is blanked will illuminate the display The alarm toggle function uses Modes 27 28 29 and 49 Thermostat Temperature Range Degrees F or C 0 disabled default 1 Degrees F 2 Degrees C This setting determines the temperature range to be used by the thermostat feature Mode 45 16 A value of 0 disables the thermostat Set Mode 32 50 1 to enable the temperature sensor If using thermostat operation with Timer Mode set Mode 37 12 0 Reserved 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB Se First Menu Level Mode Number Second Menu Level Mode Description and Instructions Use Alpha Special Counter Digits to Display Timer Days or Hours O disabled default 1 Use alpha special counter characters to display timer days 2 Use alpha special counter characters to display timer hours 3 Display seconds derived from hrs min sec 4 Display Start Count using the Alpha Counter Mode 5 Display End count using the Alpha Counter Mode The digital lettering may be used to display elapsed days or hours by using special counter characters and enabling Mode 37 49 to displays days or hours in the counter positions Wireless Transmitter Clock Test 0 disabled default 3 Enabled This mode is useful for surveying radio sign
123. ay the Start and Ending times Active Alarm Schedule default 1 This parameter determines which 1 98 alarm schedules is active Setting Mode 37 1 0 will cause the date ranges to be used Use Mode 53 54 55 and 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com iin eee First Menu Level Mode Number Second Menu Level Mode Description and Instructions 56 to change date ranges Alarm group is different than the other 19 alarm groups If no date range is active then group is the default This feature reduces the number of alarm entries required in some schedule situations See also Mode 38 Alarm Schedule Group Assignment A value of 99 in mode 38 will cause the alarm to activate in all schedules if the day code matches the current day In Tiger version 3 75 and later the number of alarm entries has expanded from 100 to 1000 The 1000 alarm entries are stored in 10 different schedules of 100 entries each When Mode 37 1 0 alarm schedules will automatically change depending on the active date range There are 20 date ranges available The Mode 38 function has changed It now determines which schedule is active for date ranges defined in Modes 53 54 55 and 56 Setting Mode 32 4 4 allows the Timer control button to switch between schedules 0 10 0 activates date range switching Press Timer Control to access Mode 37 1 Use the Up and Down buttons to ch
124. ay through Friday 29 4 9 alarm number 4 active Monday through Friday 30 1 01 alarm 1 use wireless relay module address 0 relay number 1 30 2 01 alarm 2 use wireless relay module address 0 relay number 1 30 3 01 alarm 3 use wireless relay module address 0 relay number 1 30 4 01 alarm 4 use wireless relay module address 0 relay number 1 34 1 33 alarm 1 function and duration 34 2 33 alarm 2 function and duration 34 3 33 alarm 3 function and duration 34 4 33 alarm 4 function and duration 32 12 4 transmit alarm data out the SR ST port 37 56 2 enable wireless alarm control using SR ST port See Mode 37 70 for additional relay functions Wireless Transmitter Address Analog Time clock time only wireless clock address code default 24 produces an actual address of 0800824 Wireless Transmitter Address BRG Digital clock time only wireless clock address code default 25 produces an actual address of 0800825 Wireless Transmitter Address BRG Digital clock time or commands wireless clock address code default 28 produces an actual address of 0800828 Dim Display When Alarm Active 0 1 15 1 default Change individual display intensity Mode 3 to this value when the alarm is active Mode 26 n must be set to 9 to enable this feature The display will restore to the original intensity when alarm goes inactive See also Mode 26 Mode 37 46 Wireless Clock Timer Countdown
125. be configured to accept control commands in most cases The control program will send data to clocks using both serial wire and Ethernet 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 138 DO ne 800 295 0220 PC USB RS422 Adapter USB 422 Adapter This option allows the clock to be set by PC or the PC to be set by the clock A USB interface adapter is included for connecting the clock to a computer Simply attach the adapter to the clock sync line and plug into the PC s USB port A software CD is included for the Windows operating system A driver is also included on the BRG Digital Clock controller software CD under the directory USB Adapter Driver 2 0 The driver can also be downloaded from http www brgprecision com Windows will detect the USB connection and will direct you to insert the CD Once connected the time and date may be exchanged between the PC and clock s The scheduling program included with Windows can be configured to run the time send software anytime between once per minute and once a day or longer The serial sync options ST and or SR are required When sending time from a PC to a time zone display set mode 32 8 2 and mode 45 5 to the source time zone offset This will strip off daylight savings time and convert the local time to UTC time for use by the time zone display One BRG clock will drive up to 5 slave clocks when wired in p
126. c characters Upon exiting Mode 32 54 the clock will save any changes exit the menu and re initialize the message display If a clock has only digital lettering and the clock is restored back to factory defaults control of the clock will be lost To regain control of a clock using 16 segment lettering hold down the Up button while power is applied To regain control of a clocks using 5x7 lettering hold down the Timer Control button while applying power This will provide enough control to restore customer defaults Infrared Remote Control When Using Multiple Clock Processors O disabled default 1 enabled A display with multiple processors or multiple stand alone displays may be configured such that when the mode is pressed the right hand decimal point will illuminate on the active display When the light is on all buttons function normally on that display The buttons are disabled on all other displays To access another display press the mode button multiple times until the desired display s decimal point illuminates When the display is powered on the display with clock address 1 Mode 32 42 will be the active display If it is desired to not have any display active when first powered on don t use clock address 1 To configure multiple processors to use a single infrared remote control set Mode 32 42 n enter an address from 1 99 for each respective processor Mode 32 49 0 No menu lockout timer is required Mode
127. cimal Fraction If the Latitude integer is negative then the Latitude decimal fraction must also be negative Enter South latitudes as negative values Beginning with software version 2 92 the fraction is entered as four digits For example 1230 is entered as 1230 Enter 25 as 2500 Prior versions use a two digit fraction Mode 21 n must be set to display Sunrise Sunset times for a time other than UTC See also Modes 32 35 32 36 and Display Modes 56 57 58 and 59 See also Mode 34 to activate an alarm at the Sunrise time Local Sidereal Time Offset 10 Millionths of a Degree This parameter is also used to define the Longitude offset for Local Sidereal Time in fractional decimal degrees To enter an offset to UTC enter a negative number for fractional decimal degrees West and a positive number for fractional decimal degrees East The fractional portion of the offset may extend into the ten millionths When entering negative numbers a minus sign will appear until four digits are used At that time a light will appear in the upper left corner of the display to indicate the value is negative See also Modes 62 and 63 See also Mode 72 to enable disable Sidereal Time Sidereal Time Example 97 degrees 37 minutes 45 seconds West Convert to decimal 97 37 60 45 3600 then make it negative for Western Longitude 97 62916666 degrees Mode 63 n 97 n display position note the negative value Mode 64 n 6291 n disp
128. clocks This is accomplished by turning the knob on the back of the analog clock You can stop the master clock pulsing by holding down the Mode button until a 0 appears then let go A 1 will then appear Press the down button once to return to the time display See also Mode 37 28 Analog Master Clock Mode 27 Alarm time Mode 29 Alarm day of the week Mode 37 3 59 Minute Sync Protocol 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 800 295 0220 ABRG Typical Configuration of a Digital Master Clock with Bi Polar Analog Secondary Clocks MRT 4 2 e gt 2 d 2 up JASN Zen 110 volts AC seats 8 4 a 4 To more 763 76 clocks Digital Master Clock with Smart Digital RS422 and Bi Polar Analog Secondary Clocks Master Clock Drives up to 200 analog clocks and sete SE 1 000 digital clocks To more clocks 24 v01 DC clocks 1109240 vars Optional Aiert Hom Bells Buzzer Digital Master Clock with Bi Polar Digital Impulse and Bi Polar Analog Secondary Clocks Master Clock Drives up to 200 analog clocks and 77777 1 000 digital clocks 24 valts DC Ween E Optional Alert HamyBells Buzzer 600 N River Street
129. conds xx where xx is blank no leading zero 29 yy xx yy last two digits of the year xx blank 30 xx dd xx blank dd day of the month 31 hh mm hours minutes with leading zero see mode 32 52 military format 32 nnno temperature in degrees F with degree sign instead of F Set Modes 32 54 0 32 29 4 33 nnno temperature in degrees C with degree sign instead of C Set Modes 32 54 0 32 29 4 34 aaa alpha month plus numeric day of the month JAN FEB MAR etc Set Modes 32 29 4 32 63 1 35 aaa alpha day of the week MON TUE WED etc Set Modes 32 29 4 32 63 1 36 xyyx last two digits of the year centered on the display 37 xddd Julian date or day of the year with leading zero on 3 digits 38 nnnF gt nnnC alternating temperature between F and C See also Mode 32 50 39 00 00 idle display mode zeros do not change 40 9999 most significant four digits of and eight digit number factory use only 41 ss 9x seconds and tenths of a second 42 dd xx day of the month left justified 43 Axxx or Pxxx AM PM indicator 44 PUAS Use by auto increment counter to indicate paused condition 45 xmmx minutes centered 46 hh mm hours and minutes with trailing colon 47 ss 99 seconds hundredths of seconds with colon See Mode 37 33 48 ssxx seconds with colon discrete displays only 49 99 99 special split counter for discrete g
130. csascascsnseascseccasesnceasesees 131 597 MINUTE WIRE SYNCHRONIZATION os ssscssssssaisassanivcsdascesetsears savssissestetouncseisisivesvenststvensemseatonwnerars 133 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 800 295 0220 ERG SERIAL WIRE SYNCHRONIZATION c ccsssssssssssssssssssssesssssssssssssssessssssessesssseesesssseesssessessesessessesessessesersesessens 134 GPS ATOMIC TIME RECEIVER scssssssssssssssssssscsssssssssssessesesssssssessssssessssessessssessssessessessesessessesessessessesesees 136 CDMA ATOMIC TIME RECEIVER csssssssssssssssssesesssesessessssessessesssessssessessssessessesessesssseseessseessesessesseseseesees 137 PC DIGITAL CLOCK CONTROL SOFTWARE cssssssssssssessrsessessssesssssrsesessessesessessesessessesessessesensssesenees 138 PC USB RS422 ADAPTER csccssssssssssssersessssessessrsessssssessessnsessesessessesensessesesssscsessesessesscsensossessesensesseseneeseeees 139 PC SERIAL RS232 RS422 ADAPTER cscssssssrssssrserssssrsesssssrsessesessessssssessessssessesessessesesssessessesesseseessesenseseeees 140 SERIAL SYNC COMMUNICATIONS PROTOCOL cccssssssssssrsesssssssesscssssessssssesssensessecsssessesessesseseseesseees 142 BRG CLOCK TIMER COUNTER SERIAL COMMAND STRUCTURE cccssssssssrsssscssseessssersnsseesseesseees 142 EXTERNAL CONTROL LINE WIRING DIAGRAM CL OPTION cccssss
131. ct time and date before the 59 minute correction protocol can force them to the correct time When the sync frequency is set to once per day 1 the time values at Modes 16 and 17 are used to trigger sync transmission and the Starting value When the sync frequency is set to once per hour 2 a sync pulse is transmitted hourly at 30 minutes after the hour Hours remain unchanged and seconds are set to 0 When the sync frequency is set to once per minute 3 a sync pulse is transmitted every minute at 30 seconds after the minute Hours and Minutes remain unchanged Display Refresh Delay value 0 99 default 0 Display refresh delay in tenths of a second The mode is for factory use only Zone Number Identifier This mode is used to identify the zone number of each four digit display in clocks that use multiple four digit displays O inactive default 1 displays the respective zone numbers of each display Press the Mode button to cancel zone display and return to the normal time display Elapsed Days and Hours Modifier 0 true elapsed time in days where one day equals 24 hours or 3600 minutes or 86 400 seconds 1 default causes the elapsed day counter to always change at 00 00 midnight regardless of the number of hours elapsed When displaying elapsed hours hours will increment at 00 minutes regardless of the time that has elapsed 2 display elapsed seconds up to 99 999 999 using counter display modes 66 and 40
132. ctable operation may result from entering invalid values For example entering hours and minutes greater than 23 59 may cause incorrect operation Keypad switch operation 12 and 16 button keypad switches are available The and keys are available on both keypad styles Some configuration parameters listed below allow entering more than one parameters For example item 5 allows the entry of the timer beginning and ending times To enter the beginning time 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com iin eee First Menu Level Mode Number Second Menu Level Mode Description and Instructions press the button before entering the hours and minutes To enter the ending time press the before entering the ending time Once either or is pressed the keypad stays in the selected entry mode until another mode is selected The is the default on power up The required number of installed thumb wheel digits are listed with each parameter below Keypad or Thumb Wheel configuration parameters 1 4 digits Starting hours and minutes hh mm keypad 2 6 digits Starting hours minutes and seconds hh mm sec keypad 3 4 digits Ending hours and minutes hh mm keypad 4 6 digits Ending hours minutes and seconds hh mm sec keypad 5 8
133. custom items that cannot be used may be returned at a 25 restocking charge if items are shipped prepaid in the original boxes Carrier is responsible for parts damaged in shipment The customer should have driver sign for damaged carton on delivery receipt and make a claim with the freight company Please insist that the carrier s representative conduct an inspection and retain all packing materials for the inspector Please report promptly for immediate follow up on short shipments No action arising from any sale by BRG may be brought by a customer more than one year after the date of shipment Terms of Payment New accounts require prepayment International orders require prepayment by Telegraphic Transfer bank wire For established customers payment is due in full within 30 days from invoice date Other payment methods include Visa Mastercard American Express Discover Novus Domestic Only Add 4 for ground shipping in the U S and Canada Domestic shipping is prepaid for U S Government orders Other shipping methods are available All past due accounts will be subject to a finance charge of 1 5 per month BRG may cancel or delay future deliveries if customer fails to make prompt payment or if customer s financial condition warrant such action in BRG s opinion BRG is not responsible for delays The customer will be contacted and given the choice of receiving a partial 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 29
134. d at the factory and should not be changed See also 32 54 to determine the type of displays installed 16 segment or 5X7 matrix If the display has only 5x7 matrix digital lettering and the program is reset to factory defaults the display will blank and control will be lost To regain control of the display hold down the Timer Control button while powering up the display When the display test pattern appears release the Timer Control button The display character length will be set to 5 digits and the display format will be set to the hours and minutes Version 3 10 or later Alpha Display Operating Mode 0 solid Display a fixed message on the alpha digital lettering 1 frame rotating display default For example if eight alpha digits are installed and the message length entered is 24 characters long the message will flip one frame at a time displaying eight characters at a time See also Mode 32 3 to set the number of rotating display pages Mode 51 4 determines the period between frames Automatic frame rotation occurs on the second Therefore if multiple clocks have their time synchronized then frame rotation will occur in sync Multiple displays may start with the same frame or the starting frame may be specified using Mode 32 3 2 24 An alternative to specifying a starting frame is to simply program different information into the frames on the different displays 2 scroll characters to the left For example
135. day to switch between daylight saving and standard time The clock will begin changing to the new time when the clock hands are at 2 04 In addition to Mode 24 1 14 Modes 45 20 and Mode 45 21 must be set to the correct DST rule Standard Tiger Clock Time Reception Control 0 default receive time updates from all devices 1 receive only standard time updates on the GPS port 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO First Menu Level Mode Number Second Menu Level Mode Description and Instructions 7 receive only DuraTime wireless CDMA updates on the GPS port 9 receive only DuraTime wireless GPS updates on the GPS port 11 receive only standard time updates on the SR ST port 17 receive only DuraTime wireless CDMA updates on the SR ST port 19 receive only DuraTime wireless GPS updates on the SR ST port Supports reception of DuraTime wireless GPS and CDMA devices O accept all time packets 9 accept only DuraTime wireless GPS time packets 7 accept only DuraTime wireless CDMA time packets To use this function connect a 2 4 GHz DuraTime radio to the GPS port Set Mode 32 15 7 Set Mode 37 77 9 to receive GPS and optionally transmit local time If an RC100 is present set Mode 32 15 7 and Mode 37 77 1 to receive local time updates and reject GPS or CDMA updates The radio can also be connected to the SR ST port Mode 37 77 also a
136. days and months Incrementing past the end of the year or decrementing past the beginning of the year will change the year respectively 1992 2075 Year Change using the Up and Down buttons 1 15 Display Intensity 1 lowest intensity 15 highest intensity Default 12 See also mode 25 for individual display intensity control 9999 Automatic Time Correction to Enter a negative value to slow the clock down or a positive value to speed it up The 9999 default scale is seconds per year Use Mode 37 37 to configure the scale to seconds seconds per per month Default 0 month or year 0 99 Alarm Output Duration seconds This value determines how many seconds the alarm line is held active A value of zero disables the alarm For extended alarm duration beyond 99 seconds see Mode 45 15 This mode is a multiplier for the alarm duration setting It allows an alarm duration up to 12 days Default 3 seconds See also Mode 30 for setting individual alarm duration Sync Pulse Transmit Mode O inactive Default l active This value determines if the radio sync pulse transmitter will be used when the clock 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BR o FNO o First Menu Level Mode Number Second Menu Level 00 00 to 23 59 00 to 59 00 00 to 23 59 00 to 59 9999 to 9999 9999 to 9999 0 1 Mode Description and Instructions
137. de 24 4 zone 4 DST rule Mode 24 5 zone 5 DST rule Mode 32 8 0 use time zone offsets for received time Mode 32 12 1 enable transmission once per second Mode 32 15 7 enable the GPS port for the radio transmission Mode 32 70 2 enable the GPS port for time transmissions Mode 37 67 3 transmit time on the GPS port to the radio Mode 37 78 5 configure for 5 transmit channels If necessary set Mode 33 for the respective zone to force half hour time offsets 900 MHz Wireless Analog Time Zone Clocks 1 24 Number of analog clock zones This 900 MHz analog time zone display system has been replaced with the 2 4 GHz analog time zone display system This mode allows wireless analog clocks to be used as a time zone display Each analog clock incorporates a 900 MHz receiver configured to receive a single channel The master clock transmits on multiple channels sending the time for each channel that matches the respective time zone Time is transmitted to a different clock every other second When the last clock is reached the sequence starts over with the first clock Configure each analog clock to receive on channel 16 through 39 for time zone positions through 24 respectively Position 1 is the local time as displayed on the master clock This zone may be used to drive other clocks not in the time zone array Set Mode 18 to the same value used for Mode 37 78 The number of zones to display must equal the radio channels to use
138. de 32 51 is enabled pressing the Up button on the master clock will send a timer Start command to the slave clock s Pressing the Down 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BR o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions button will send a timer Reset command If Mode 37 10 1 then the master clock will reset when the Down button is pressed just like the slave clock Pressing the Timer Control button will simulate pressing the Timer Control button on the slave clock s The slave clocks must be configured as timers and are typically configured identically as the master except for Mode 32 51 See Mode 37 38 to increase timer accuracy Display Colon O disabled 1 default enable colon in display mode 31 58 and 59 2 enable the colon and decimal point in display mode 12 Counter Actual Goal Difference 0 place counter actual minus goal in display position 3 default 1 place goal minus actual in display position 3 Digital Lettering Type O alpha message digits are 16 segment type 1 5x7 type default This parameter determines what type of displays are used with digital message displays or digital zone lettering in a time zone display 16 segment type displays use a group of 16 segments to form characters whereas 5X7 type displays use a matrix of 35 dots to form alpha numeri
139. ded up to 4 000 feet long DO NOT USE PRE MADE TELEPHONE RJ 14 IN LINE CONNECTORS OR CABLES There are usually several satellites overhead at any point in time The GPS receiver only needs to receive one satellite to obtain atomic time The antenna may be mounted indoors on a windowsill This mounting method allows a partial view of the sky which is enough to receive 2 to 3 satellites The antenna may also be placed below a skylight The GPS antenna is water tight and may be mounted outdoors on a roof or exterior wall A rotating swivel mount is included to facilitate antenna mounting The following diagrams illustrate antenna positioning _ View of Sky Inside Satelite Satelite 4 Satellite Satelite View of Sky Inside iy GPS antenna Window GPS antenna Si a Antenna cable Antenna Guise cable side SE Outside To clock e To clock Indoor Installation Outdoor Installation PMA 111 Pin Assignment 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 136 lil EE CDMA Atomic Time Receiver Overview An exciting new way of obtaining precision Universal Coordinated Time UTC has come of age Made possible by the rapidly expanding global deployment of Code Division Multiple Access CDMA mobile telecommunications systems The CDMA base stations act as repeaters for the global positioning system GPS
140. digit display Up Down Elapsed Time Days 4 or 8 digit display Up Down Elapsed Time Days Hours Minutes 8 digit display Warning time blinks display prior to final time Up Down Event Counter 9999 to 9999 4 or 8 digit display Rotating hours min gt Julian date Rotating hours min gt month day gt year Rotating hours min gt temperature F gt temperature C Temperature F Temperature C Elapsed hours 9999 to 9999 Elapsed hours 99 hours in place of 23 hour elapsed time Elapsed days 9999 to 9999 Number of GPS Satellites being received plus data activity Digital intensity control 4 or 8 digit display Blinking digits 4 or 8 digit display Blinking or solid colon Blinking once per second display when alarm activated Variable rate blinking when alarm activated 12 24 hour display format PM indicator Sync reception indicator Alpha month with numeric day of the month Alpha day of the week Automatically dim display at nighttime Minute decimal point may indicate daytime or night time Display Sunrise time Display Sunset time 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com Es 800 295 0220 12 Installation The digital clocks are constructed using a sturdy aluminum frame with an anti glare acrylic lens and ABS back plate Various mounting methods are available The standard mounting method consists of saw tooth hanger
141. digits Starting keypad and Ending keypad hours and minutes hh mm 6 12 digits Starting keypad and Ending keypad hours minutes and seconds hh mm sec 7 4 digits Ending month day keypad 8 6 digits Ending month day year mm dd yy keypad 9 10 digits Ending hours mintes keypad month day year hh mm MM DD YY keypad 2 10 4 digits Start count keypad 11 4 digits End count keypad 12 6 digits Start count keypad 13 6 digits End count keypad 14 8 digits Start count keypad 3 15 8 digits End count keypad 16 8 digits Start keypad and End keypad count 17 4 digits Counter auto increment amount 0 9999 keypad 18 4 digits Counter auto increment period 0 9999 keypad 19 4 digits Counter auto increment amount keypad 0 99 and period keypad 0 99 20 8 digits Counter auto increment amount keypad 0 9999 and period keypad 0 9999 21 4 digits Starting minutes and seconds min sec keypad 22 4 digits End minutes and seconds min sec keypad 23 8 digits thumb wheel switch format 8d 6 digit auto count amount plus 2 digit multiplier keypad 24 4 digits Counter increment amount 0 9999 keypad Number of Pe
142. dio to scan all available channels while in receive mode Mode 37 67 1 or Mode 37 67 2 Digital Repeater Clock A digital clock can be configured to repeat the data received to extend the coverage area Set Mode 37 68 to the same channel as the master clock The repeater clock will transmit on the next channel higher Set all digital clocks to be covered by the repeater to one channel higher than the master clock or configured them to scan all channels by setting a channel less than 60 This is the default configuration Analog clocks always scan all channels Mode 32 12 1 enables serial data output Mode 37 67 5 or 6 places the 900 MHz data radio in repeater mode 5 GPS port 6 SR ST port Mode 37 68 Determines the radio channel to be used for transmitting and receive See channel operation below Mode 37 69 Determines the radio group assignment 5 default 20 default U S Canada radio channel scan all channels in receive mode 16 47 U S Canada radio channel scan all channels in receive mode 48 55 U S Canada no channel scanning includes 40 offset 56 87 Australia New Zealand scan all channels in receive mode 88 95 Australia New Zealand no channel scanning includes 40 offset Transmit and Repeat mode always uses fixed channel assignments Repeaters use both odd and even channels therefore it is recommended to configure Mode 37 68 to use only even channel numbers in case
143. e 97 62916666 degrees Mode 63 n 97 n display position note the negative value Mode 64 n 6291 n display position a dot on the display indicates negative Mode 62 n 6666 n display position a dot on the display indicates negative Sidereal Time 0 Disable Sidereal Time default 1 Enable Sidereal Time for display zones through 24 Sidereal time runs about four minutes faster per day than Solar time This method of time measurement is used in Astronomy and other disciplines Once Sidereal time is enabled for one ore more zones all time display modes for those zones will be based on Sidereal Time If two displays that include seconds are used to show Solar time and Sidereal time the seconds on the displays will not necessarily match or increment at the same time because Sidereal time runs at a different rate than Solar time If no offset is entered in Mode 62 63 and 64 then Universal Sidereal Time is used If Longitude offsets are entered then Local Sidereal Time is used for the zones where an offset has been entered See also Modes 62 63 and 64 CEL FH SS Radio NV Ram Parameter Mode 74 n y n NV mode y value change any NV ram Mode 37 67 configures the port used for CEL commands CEL FH SS Radio Functions Mode 75 1 n number of hops 5 default Mode 75 2 n transmit power level 17 default Mode 75 3 n 1 master default with repeater mode disabled 2 slave with repeater mode enabled 3 both with repeater
144. e 24 n n display position 1 24 Daylight Savings code a value of 1 implements U S rules Mode 20 n 16 n display position 1 24 Displays CDMA diagnostics For standard CDMA the first two digits will display 00 or 06 When first powered up the 00 will blink every few seconds as it attempts to receive a time signal When a standard CDMA is locked onto the time signal a 06 will display constantly These two digits are followed by a space then a 0 or an alternating 0 and 1 Once the receiver is locked onto the time signal this digit will alternate between 0 and 1 once per second For enhanced CDMA the first two digits will indicate signal strength A value of 99 indicates the signal was lost The third digit indicates data communications to and from the CDMA receiver The lower right decimal point will illuminate if the clock is locked onto the sync signal Other sync indication methods are available using Mode 32 2 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 137 ae 000 295 0220 JBRG PC Digital Clock Control Software Clock Control Windows Program Installation Insert the CD into the computer The control program should auto install If the installation program does not start execute the SETUP EXE program on the CD The control program is used to control many functions and parameters The digital clock must
145. e 37 17 72 Display Most significant four digits display mode Mode 37 EE 73 Display Display colon on display mode 53 Mode 37 25 73 Display Circle Line Mode 21 20 76 Display Decimal Point Reverse Mode 37 33 eee 76 Display Alternating duration first display Mode 40 77 Display Alternating duration second display Mode 41 77 Display Alternating duration third display Mode42 78 Display Identify zones Mode SOA 108 Display Drivers refresh Mode 32 29 seses 58 Ethernet Adjust NTP time received Mode 32 40 eee 59 Configuration port Mode 45 11 cece eeeeeeeees 100 NTP update period Mode A5 10 100 OVGIVICW tee Ed 122 Reset hardware enable disable Mode 32 46 60 Save auto flash memory Mode 32 43 eee 60 Serial communications port Mode 27 AN 61 UDP time sync port Mode 45 1200 100 External Control Line Mode 22 86 51 External control line wiring diagram seeeeee 152 Format 12 24 hour Mode 29 47 Timer 12 24 hour display format Mode 48 107 Format Switching Sync Line Mode 32 11 52 GPS Enable Disable Mode 22 18 54 OVETVICW rosorna de Ed ad 135 Illuminate all segments Mode 0 3 107 Infrared Remote Control Mode 32 55 ccceeeeees 62 Intensity auto Mode 23 14 54 Intensity Display Mode 3 43 Intensity individual Mode 28 48 IRIG B SMPTE ESE Enable Disable Mode 22 18 54
146. e Time is received directly Obtains highly accurate Signal may not be available 495 Receiver from CDMA cellular time from cell phone in some areas A signal test telephone transmissions towers no fees or ongoing device is available Provides absolute timing charges no sync wires accuracy Signal is typically available deep inside building without the need for antenna wires PC Time Server A PC may be used to obtain Existing computers may A PC time server is 125 the time from the internet or serve as a time server typically not as reliable as a other time source then Using an existing PC as a dedicated time server or distribute the time to clocks time server is less costly master clock The wire sync using Sync Wire or than a dedicated time server distribution method requires Ethernet a serial interface adapter Ethernet NTP or UDP time data is Obtains time from existing Long term reliability 125 Communications distributed over the existing local or internet time questionable as computer computer network servers Highly accurate technology changes rapidly med cost Fiber Optic Clocks Timers and Clocks may be up to 20km Requires the installation of 695 Modem Counters and other displays apart Fiber Optic cable fiber optic cable may be linked over great transmission is secure distances using fiber optic Highly reliable Not prone cable Usually for secure to creating or receiving point to point links interference GPS T
147. e clocks Bipolar analog clocks are used for their increased reliability over older analog clock systems The basic bipolar analog clock only contains three moving parts No relays ratchets or pawls are used The master clock provides all power and sync pulses to the analog clocks over a simple two wire circuit Further the master clock sends correction impulses each and every minute to maintain precise time over long periods In the event of a power outage the master clock will continue to keep time up to ten years When the power returns the master clock will fast step the analog clocks to the correct time If continuous time display is required during a power outage a simple off the shelf uninterruptible power supply UPS will provide many hours if not days of operation for the entire system Installation It is recommended to use 14 ga to 16 ga wire between the master clock and analog clocks Any wiring layout may be used including star T and buss configurations More wiring legs will reduce overall wiring resistance All wiring should be in parallel All wiring from the red wire of the master clocks should connect to the same terminal on the analog clocks Likewise all wiring from the black wire of the master clocks should connect to the same remaining terminal of the analog clocks The analog master clock includes heavy gage red and black wires for connection to the analog clocks The wiring must remain in phase If s
148. e set to blink when the End time is reached Mode 32 4 Code Blue Timer Control stay in timer mode when the End time reached Mode 32 5 Code Blue Timer Direction up or down Mode 32 6 External timer control line functionality Mode 32 7 Resume real time after timer idle Mode 32 10 Timer alarm enable disable Mode 32 13 Alarm pulsing Mode 32 18 Set Long Duration Timer mode Mode 34 Additional alarm pulsing Mode 35 Medium Duration Elapsed days or hours Reset value Mode 36 Code Blue timer control display format Mode 37 6 Elapsed days and hours functionality Mode 37 12 Turn off alarm when timer paused or reset Mode 32 24 Activate alarm relay when timer started 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com PRECISION PRODUCTS Mode 37 9 Mode 44 1 Mode 44 2 Mode 32 22 Mode 32 26 Mode 37 19 Mode 37 38 Accelerated timer for motion picture special effects Red Yellow Green light mode using two relays Set Mode 43 1 2 Use leading edge to start and stop the timer with variable delay before start will pause the timer Use Start button to Start Stop and Reset the timer May be used with Mode 37 9 Increase Short Duration timer accuracy Ending month and day Used with Mode 18 auto timer restart Ending year Use with Mode 18 auto timer restart 600 N River Street Derby Kansas 67037 e 316
149. e year derived from this rule is stored in Mode 52 13 If the DST date is a fixed day i e 15 of the month then set this mode to 0 and enter the Julian day into Mode 52 13 instead See Mode 24 n 23 and Mode 45 398 Custom Daylight Saving Rule Ending Value for Mode 24 n 24 ver 4 64 Default 0 Values for rule driven custom daylight saving time for Mode 24 n 24 The format is MMRD where MM month 1 12 R instance of the select day of the week 1 5 5 last instance D day of the week 1 7 where 1 Monday and 7 Sunday For example 357 represents the last Sunday in March or 1117 represents the First Sunday in November If the value gt 2000 then the right two digits represent the day of the month The left two digits minus 20 equal the month For example March 15th 2315 April 1st 2401 The day of the year derived from this rule is stored in Mode 52 14 If the DST date is a fixed day i e 15 of the month then set this mode to 0 and enter the Julian day into Mode 52 14 instead See Mode 24 n 23 and Mode 45 38 Temperature Sensor Adjustment The temperature sensor may be adjusted up or down in degrees Kelvin to overcome line loss attributed to a long cable run to remote sensor The adjustment is linear across the operating temperature range from 40 F 40 C to 212 F 100 Wattmeter Offset Value 0 999 default 135 The value is used to calibrate the Wattmeter located in the master transmitter The value enter
150. ecure communications method provides accurate secure and reliable communications When Mode 37 67 1 or 2 receive and transmit in client mode typically assigned to slave clocks time sync data control and configuration commands may be sent to the clock Mode 37 68 determines the radio channel When Mode 37 67 3 or 4 receive and transmit in server mode typically assigned to the master clock time sync data control and configuration commands may be sent from the clock to other clocks or a PC Mode 37 68 determines the radio channel For master clock operation if Mode 37 67 3 GPS port then set Mode 32 15 7 If Mode 37 67 4 SR ST port then set Mode 32 60 0 Set Mode 32 12 1 to enable time sync transmissions When Mode 37 67 5 or 6 receive in client mode and transmit in server mode typically assigned to the repeaters Mode 37 68 determines the radio channels used in client mode Server mode will used this value plus one For this reason it is recommended that Mode 37 68 be set only to even channels For repeater operation if Mode 37 67 5 GPS port then set Mode 32 15 7 If Mode 37 67 6 SR ST port then set Mode 32 60 0 Mode 32 12 will be controlled automatically The repeater alternates between transmit and receive channels every ten seconds In lieu of using repeater mode to expand the coverage area multiple network enabled master clocks may be used Each master clock includes its own alarm schedule Any and all master clocks
151. ed is divided by 100 and multiplied against the reading from the Wattmeter sensor A value of 100 will cause not adjustment Alpha Display Position Map This parameter is factory configured and should not be changed O numeric display at position 1 four digit alpha display position alpha month plus numeric day of month counts as one position Timer 12 24 Hour Display Format This value determines whether the display is in 12 or 24 hour format while in timer mode See Mode 23 for 12 24 hour format selection while in real time mode Scheduled Alarm Toggle On Off This mode is used to turn the alarm output on and off in real time mode In timer mode it can be used to execute specified timer control commands This mode can also be used to control an auto incrementing counter see Mode 32 61 0 Deactivate alarm toggle output 1 turn on alarm output 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 107 dB o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions 2 turn off alarm output 3 Counter Timer Reset 4 Counter Timer Pause Resume same as Up button 5 Timer Reset and Start same as Timer Control button 6 Play an audio file over a wireless connection 7 Send audio player commands directly out the serial port 8 Send command to switch Midland UHF transmitter to channel A 9
152. ed or stopped USE ONLY WITH SHORT DURATION TIMERS If real time accuracy is a priority then disable this mode If timer precision is a priority especially when displaying tenths and hundredths of a second then enable this more Timer Signal Light Blinking Precursor Available for down timers only default 0 setting this parameter will blink the green and or yellow signal lights near the completion of their respective cycle Setting Mode 37 39 to through 10 will blink the yellow light near the completion of the warning time The point at which the light begins blinking is determined by dividing the warning time by the value of Mode 37 39 For example if Mode 37 39 3 then the warning time will be divided by three This is the point at which the yellow light will begin blinking The blink rate is fixed at two cycles per second Setting Mode 37 39 to 11 20 will blink the green light before the signal turns yellow A value of ten will be subtracted from the mode value to produce the divisor Setting Mode 37 39 to 21 30 will blink the green and yellow lights near the completion of their respective cycle Twenty is subtracted from the mode value to produce the divisor Timer Days or Hours Master Slave Mode This mode allows elapsed days or hours to be sent and received over sync lines O disabled default 1 elapsed days 2 elapsed hours The counter field is used to send the days or hours therefore this mode cannot be used with checksum
153. ee First Menu Level Mode Number Second Menu Level Mode Description and Instructions 2 minutes 3 hours see also Modes 45 1 45 2 The Up Start Pause button pauses and resumes auto increment Mode 37 13 also acts as a multiplier for Modes 37 41 37 42 and 37 43 For example if 37 13 10 then setting Mode 37 41 99 would cause a 99 second delay Timer Counter Change Start Change End Button Configuration This setting enables or disables the optional Timer Counter Change Start Change End shortcut buttons This set of buttons allows changing the Timer Counter Change Start Change End values without going through the menu system These optional buttons are in addition to the standard Mode Up and Down buttons 0 disable 1 seconds disabled When changing timer Change End Change Start times press the Start or End button once to change the hours and minutes Press the same button again to return the display to the previous display mode 2 seconds enabled When changing timer Change End Change Start times press the Start or End button once to change the hours and minutes Press the same button again to change the seconds Press the same button once more to return the display to the previous display mode 3 seconds only When changing timer Change End Change Start times press the Start or End button once to change the seconds Press the same button again to return the display to the previous display mode 4 Enable
154. en once per minute and once a day or longer The serial sync options ST and or SR are required When sending time from a PC to a time zone display set mode 32 8 2 and mode 45 5 to the source time zone offset This will strip off daylight savings time and convert the local time to UTC time for use by the time zone display RS422 Serial Communications BRG clocks utilized an industry standard RS422 buss transceiver that meets or exceeds ANSI Standards EIA TIA 422 B and ITU Recommendation V 11 This device includes the following features for improved reliability 1 Thermal Shutdown Protection 2 Positive and Negative Current Limiting 3 60 mA Output Current 4 Automatic Noise Suppression One BRG clock will drive up to 5 slave clocks when wired in parallel or an unlimited number of clocks if they include and input and output and are wired in series Diagnostics With power applied to the clock connect a meters red lead the red Input sync wire and the black meter lead to the black Input sync wire You should see a reading of 12 K ohms A lower resistance indicates a short in the sync wiring or clock circuit A higher resistance indicates a disconnected sync wire or a problem with the clock s sync circuit The sync output of the clock may be measured with a volt meter There should be 5 volts when the meter s read lead is connected to the red Output sync wire and the meter s black lead connected to the clock s black Output sync
155. ents the last Sunday in March or 1117 represents the First Sunday in November If the value gt 2000 then the right two digits represent the day of the month The left two digits minus 20 equal the month For example March 15th 2315 April 1st 2401 The day of the year derived from this rule is stored in Mode 52 7 If the DST date is a fixed day i e 15 of the month then set this mode to 0 and enter the Julian day into Mode 52 7 instead See Mode 24 n 21 and Mode 45 33 Custom Daylight Saving Rule Ending Value for Mode 24 n 21 ver 4 64 Default 0 Values for rule driven custom daylight saving time for Mode 24 n 21 The format is MMRD where MM month 1 12 R instance of the select day of the week 1 5 5 last instance D day of the week 1 7 where 1 Monday and 7 Sunday For example 357 represents the last Sunday in March or 1117 represents the First Sunday in November If the value gt 2000 then the right two digits represent the day of the month The left two digits minus 20 equal the month For example March 15th 2315 April 1st 2401 The day of the year derived from this rule is stored in Mode 52 8 If the DST date is a fixed day i e 15 of the month then set this mode to 0 and enter the Julian day into Mode 52 8 instead See Mode 24 n 21 and Mode 45 32 Custom Daylight Saving Rule Starting Value for Mode 24 n 22 ver 4 64 Default 0 Values for rule driven custom daylight saving time for Mode 24 n 2
156. er is restored the clock resumes normal operation and display If you have any questions or do not understand the operating modes listed below please call technical support at 800 295 0220 before making any changes to the clock s configuration The PM indicator light located in the upper left corner of the display is used to indicate PM hours and sync status When 12 hour display mode is used the PM indicator will illuminate during PM hours If enabled the PM indicator will flicker at the top of every minute when the clock is in sync with a master clock When a GPS atomic clock receiver is used the antenna must be extended to a location where a radio time signal is present The CDMA atomic clock receiver only requires a small antenna located on the clock Sync signals are sent to slaved clocks whether or not an atomic clock signal is received The minute decimal point will remain on as long as the clock is in sync with the U S time standard Changing the Time Press the Up button to advance the time or the Down button to decrement the time The longer you press the button the faster the clock will move Some clocks are configured with these buttons temporarily disabled Configuration Menu The Mode Up and Down buttons are used to select various operating modes and parameters The values of the Mode Up and Down buttons will change with increasing speed the longer the buttons are held down Pressing the buttons quickly will
157. er power failure 14 Mode 44 1 00 00 ending month and day 15 Mode 44 2 2001 ending year BIO SOY Ge ho 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com iin eee Down timer starting at 10 20 15 Stop at zero and sound the alert horn for 5 seconds Display hours minutes and seconds using an eight digit display Mode 23 1 24 display to 24 hour format Mode 5 5 set alarm duration to 5 seconds Mode 7 10 20 set Starting hours and minutes Mode 8 15 set Starting seconds Mode 13 1 stop at the end time Mode 14 3 set down timer direction Mode 20 1 2 display hours and minutes on the leftmost four digits Mode 20 2 1 display seconds on the rightmost four digits G0 SON Se ha Down timer starting at 0 30 00 Stop at zero and sound the alert horn for 5 seconds Blink the display rapidly one minute before the timer stops Display hours minutes and seconds using an eight digit display 9 Mode 23 1 24 display to 24 hour format 10 Mode 5 5 set alarm duration to 5 seconds 11 Mode 7 10 20 set Starting hours and minutes 12 Mode 8 15 set Starting seconds 13 Mode 13 1 stop at the end time 14 Mode 14 3 set down timer direction 15 Mode 20 1 2 display hours and minutes on the leftmost four digits 16 Mode 20 2 1 display seconds on the rightmost four digits 17 Mode 43 1 3 Warning time enab
158. erby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com iin eee First Menu Level Mode Number Second Menu Level Mode Description and Instructions 2 At 01 00 40 standard time 02 00 40 analog clock time the analog clocks will turn on the internal wireless receiver 3 At 01 00 57 standard time 02 00 57 analog clock time the master clock will send time data lasting three seconds 4 At 01 01 00 standard time 02 01 00 analog clock time the analog clock will turn off the wireless receiver and begin processing the time data The analog clock will make nine attempts to receive a valid time transmission before turning off the receiver 5 At 01 04 00 standard time 02 04 00 analog clock time the analog clock hands will fast forward 11 hours to the correct time 6 At 01 08 00 standard time the analog clock changes from fast forward to normal speed and displays the correct standard time The entire operation takes 8 minutes during which the second hand will run normally always displaying the correct seconds SPRING 1 The second following 01 59 59 local standard time the master clock will change to 03 00 00 local daylight saving time 2 At 03 00 40 daylight saving time 02 00 40 analog clock time the analog clocks will turn on the internal wireless receiver 3 At 03 00 57 daylight saving time 02 00 57 analog clock time the master clock will send time data la
159. erence 600 N River Street Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com 124 RE 000 295 0220 JERS Clock Configuration Main Page Clock Configuration TCP C uration Clock Settings Security Clock Name RC100 max 20 characters Jpload Firmware Reboot SNTP Sample Interval 1 1 1440 minutes Operating Mode SNTP sl UDP Destination Address 255 255 255 255 ze ype ty disabled UDP Time Port 16000 1024 65535 UDP Discovery Port 16001 1024 65535 RS422 Serial Capture Yes No Apply Restore Defaults ight RG Pre Clock Name is the user defined name used to identify the device during a network search SNTP Sample Interval is the time in minutes between SNTP time updates The default is one minute Operating Mode defaults to SNTP and should not be changed unless directed by factory technical support staff UDP Destination Address is the IP address for the clock to send responses to typically the control PC UDP Time Port default 16000 for UDP time broadcasting not usually used for SNTP time acquisition UDP Discovery Port default 16001 for UDP commands and discovery by the Windows control program RS422 Serial Capture is used by factory support staff only Click on the Apply button to save changes 600 N River Street e Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision c
160. ernal wireless receiver at the following times as displayed on the clock 11 00 40 12 00 40 02 00 40 04 00 40 9 00 40 13 00 40 18 00 40 The time zone switch located on the back of the Shengbang analog clock movments should always be set to M The DST switch has no effect Chouchin movments do not have a time zone for DST switch Activating the wireless receiver at 40 seconds after the minute conserves battery power under normal operation by limiting the time the receiver is turned on The detailed operation above assumes normal operation Low batteries or poor radio signal reception can affect these times BRG battery powered analog clocks utilize only Lithium batteries Lithium batteries provide a more constant voltage over the life of the battery compared to Alkaline batteries Lithium batteries also provide a higher voltage which is required by the battery isolation circuit Wireless Digital Clock Transmit Time Offset This value represents the minute unit that will be used to transmit to digital clocks This will allow nine digital master clocks to be located in the same building and on the same frequency For example master clock 1 could be set to transmit at the 1 minute unit master clock 2 would transmit on the 2 minute unit master clock 3 would transmit on the 3 minute unit etc Wireless Transmit Hour Range 0 continuous transmit default 1 Transmit to BRG movements between 20 00 and 06 00 and 11 00 00 15 00
161. eset line is activated It also determines when to output a sync pulse This value is not used to determine the second a pulse is transmitted default 0 Example Send a 100 ms pulse at 3 00 am over radio sync using the alarm relay Mode 6 1 Mode 16 3 00 Mode 17 00 Mode 32 33 1 Mode 37 3 1 Mode 45 8 100 Number of Displays The value sets the total number of four digit displays within a single clock display For example an eight digit clock would require a value of 2 A time zone clock with 6 four digit displays requires a value of 6 default 2 Software Version Number Displays the clock software version number Press the Mode button to exit or let the menu timeout Display Format This mode selects the desired display format for each four digit display A clock with a single four digit display would be 1 An eight digit clock would have display positions and 2 with being the left most four digits After selecting this mode select the desired display from 1 to 24 to be changed The display format values are 1 ss xx seconds xx where xx is blank 2 hh mm hours minutes 3 hh mm hours minutes with blinking colon 4 yyyy four digit year 5 mm dd month and day 6 ddd Julian date or day of the year 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com iin eee First Menu Level Mode Number Second
162. et the real time display to 24 hour format optional Mode 32 4 2 stay in timer mode until pause timeout Mode 32 5 0 set timer direction to up direction Mode 32 6 1 timer will run as long as timer switch is on Mode 32 7 30 stay in timer mode for 30 minutes after timer is stopped then return to real time display Mode 36 1 12 set timer display format to minutes and seconds Hospital Code Blue or Operating Room timer with six digit display Normally display real time hours minutes and seconds An ordinary light switch with red wall plate is recommended to control the timer When the code blue switch is turned on the display will immediately switch to up timer mode reset the timer start counting up from zero Turning the timer switch off will pause the timer for the number of minutes specified in Mode 32 7 At the conclusion of the pause delay the timer will return to real time display Mode 23 1 24 set the real time display to 24 hour format optional Mode 32 4 2 stay in timer mode until pause timeout Mode 32 5 0 set timer to up direction Mode 32 6 1 The timer will run as long at the Timer Control line is closed When the timer control line is opened the timer will pause for the duration specified by Mode 32 7 Once the pause delay has concluded the timer will return to a real time display Mode 32 7 10 stay in timer mode for 10 minutes after timer is stopped then return to real time display Mode
163. failure Mode 44 1 07 10 starting month and day 10 Mode 44 2 2000 starting year 11 Mode 9 12 00 starting hour and minutes SOO SOY eho Down timer starting at the 22 00 00 July 4 2000 and counting down to 00 00 00 January 1 2001 Display elapsed days hours minutes seconds and hundredths on a twelve digit display Flash the display for ten seconds when the timer passes through the end of the year then reverse timer direction and begin up timer operation Enable the auto restart feature to automatically restart the timer in the event of a power failure Set the current time 22 00 using the up and down buttons Mode 1 set the current month and day 07 04 Mode 2 set the current year 2000 Mode 5 10 set alarm duration to 10 seconds this also controls the length of time to flash the display Mode 9 00 00 set ending hours and minutes Mode 10 00 set the end seconds default Mode 37 34 21 display days elapsed on the leftmost four digits default Mode 37 35 2 display hours and minutes on the center four digits default Mode 37 36 11 display seconds and hundredths on the rightmost four digits 10 Mode 26 1 4 flash the display full on and off at a rate determined by the alarm pulse rate mode 32 13 11 Mode 32 13 10 flash the display at a rate of ten times per second 12 Mode 32 17 1 reverse timer direction when the end time is reached 13 Mode 32 18 1 enable auto timer restart aft
164. ffects reception on the SR ST port if the value of Mode 37 77 is greater than 10 If Ethernet is connected to the SR ST port to control the clock then connect the DuraTime radio to the GPS port to obtain time updates and or transmit time Otherwise connect the DuraTime radio to the SR ST port to receive time updates from wireless GPS or CDMA and optionally transmit time If the digital clock is to receive and transmit time packets use DuraTime firmware BRG_RC190_digital_master This version will not repeat radio packets However the radio can be reconfigured using the command buttons If the clock needs to repeat radio packet and does not need to transmit time packets use DuraTime firmware BRG_RC190_digital_slave PC commands may be sent through the DuraTime radio See also Mode 32 15 UHF Master Clocks Wireless Transmit Minute Range 10 default 0 59 minute range to send time transmissions This mode determines how often time transmissions are sent throughout the hour This is another method used to limit the number of transmission per day For example if Mode 37 77 10 then time transmissions are sent to analog clocks only when the minute is equal to or less than 10 Further when Mode 37 77 lt gt 59 then time is only sent when the hour equals 1 2 3 4 6 11 15 and 20 Digital clock transmissions would only occur once per hour when the minute equals 9 provided Mode 37 53 9 If this mode is used to limit time trans
165. function Mode 32 4 ee 31 Timer to Real Time Delay Mode 32 7 52 Timer Counter Direction Mode 32 5 n se 51 Version software Mode 109 45 Wall control EE 153 WARRANTY aere Haves 8 9 Warranty Agreement 4 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com
166. ging system The range reliable small or large systems Smaller systems master clock obtains the scale synchronization may cost more dues to the correct time using GPS or Battery powered analog cost of the transmitter s Network Time and sends it clocks are available over a standard radio paging system to all clocks in the area Radio Impulse Correction pulses are sent No wires required medium Medium reliability limited 100 periodically using UHF reliability use for isolated range and unpredictable radio applications indoor communications Serial Wire Time is distributed using a Up to 4 000 feet between Dedicated wiring must be 25 50 Communications dedicated twisted pair wire and two clocks low cost installed reliable SMPTE Time Time is distributed over Obtains time from existing Dedicated wiring required 250 Receiver dedicated time network dedicated time network wiring Time Server A dedicated time server will Use NTP and standard Available in rack mount 2 750 Stratum 1 obtain accurate time using protocols to distribute the only GPS version requires to GPS or CDMA and time GPS and CDMA are that the antenna must have a 2 875 distribute it to computers highly reliable and accurate view of the sky and time displays over the time sources CDMA computer network version does not require an outdoor antenna Supports many standard protocols Ultra high A precision oscillator No sync wire is required Clocks may require
167. h a list of up to 99 reset values Press the Change Start button again to use the reset value displayed and exit The Hour and Minute reset values are stored in Mode 27 1 to 27 99 As of Version 4 51 the Second reset values are stored in Mode 28 1 to 28 99 If Auto resume Elapsed Time is enabled mode 32 18 1 the Reset button changes the Ending month day and year The Change End button displays the Ending hour minute and optionally seconds Press the Reset button to display the month and day Use the Up or Down buttons to change the value displayed Press the Reset button again to display the year Press the Reset button once more to return the display to the previous display mode Press the Change End button once to display the hour and minute Use the Up or Down buttons to change the value displayed If 37 14 2 press the Change End button again to display the seconds Press the Change End button once more to return the display to the previous display mode When changing counter End Start values pressing the Change Start or Change End button once allows changing the Start End value Pressing the same button once more returns the display to the previous display mode To accelerate setting four and eight digit counters see Mode 57 Counter Display Mode Least Significant Four Digits default 4 This value determines the display mode for the least significant four digits of an eight digit counter value See also Mode 37 21 Counte
168. he discovery listing by clicking on it Then click the browse button to open a session to the Ethernet interface 600 N River Street Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com 126 ERG N SNTP Time Servers Main Page Clock Configuration SNTP Servers TCP IP Configurati SNTP Servers Security Server Name Upload Firmware e hon 1 ume a timefreg bldrdoc go IP address 132 163 4 103 Reboot a gov 2 129 6 15 28 IP address 129 6 15 28 3 time b tmefreg bldrdoc gov IP address 132 163 4 101 A time nist gov IP address 192 43 244 18 5 204 34 198 40 IP address 204 34 198 40 6 204 34 198 41 IP address 204 34 198 4 7 192 5 41 41 IP address 192 5 41 41 8 time nw nist gov IP address 131 107 13 100 9 Is IP address 192 5 41 40 10 time b nist gov 1P address 129 6 15 25 In each field enter the hostname e g ntp usno navy mil or IP address e g 192 5 41 42 of an SNTP time server At least one DNS server must be configured for hostnames to resolve correctly see the Network Configuration page If no DNS servers are configured only numeric dotted IP addresses will function PLEASE NOTE If an invalid DNS server is entered on the Configuration page the system may become slow and unresponsive Please ensure that the ONS server settings are correct If there are no DNS servers available make sure that the Primary DNS and
169. he month The left two digits minus 20 equal the month For example March 15th 2315 April 1st 2401 The day of the year derived from this rule is stored in Mode 52 10 If the DST date is a fixed day i e 15 of the month then set this mode to 0 and enter the Julian day into Mode 52 10 instead See Mode 24 n 22 and Mode 45 34 Custom Daylight Saving Rule Starting Value for Mode 24 n 23 ver 4 64 Default 0 Values for rule driven custom daylight saving time for Mode 24 n 23 The format is MMRD where MM month 1 12 R instance of the select day of the week 1 5 5 last instance D day of the week 1 7 where 1 Monday and 7 Sunday For example 357 represents the last Sunday in March or 1117 represents the First Sunday in November If the value gt 2000 then the right two digits represent the day of the month The left two digits minus 20 equal the month For example March 15th 2315 April 1st 2401 The day of the year derived from this rule is stored in Mode 52 11 If the DST date is a fixed day i e 15 of the month then set this mode to 0 and enter the Julian day into Mode 52 11 instead See Mode 24 n 23 and Mode 45 37 Custom Daylight Saving Rule Ending Value for Mode 24 n 23 ver 4 64 Default 0 Values for rule driven custom daylight saving time for Mode 24 n 23 The format is MMRD where MM month 1 12 R instance of the select day of the week 1 5 5 last instance D day of the week 1 7 where
170. he start button starts timer as soon as the button is pressed After 2 99 seconds have elapsed since the timer was started pressing the start button again will stop the timer Further presses have no effect The reset button is used to reset the timer Once the timer is paused or reset it returns to leading edge operation See also Mode 37 19 for single line timer control and Mode 32 24 for alarm activation when the timer is started and or stopped Timer Reset Button 0 Pressing the reset button once stops the timer pressing it again resets the timer 1 Pressing the reset button once stops and resets the timer 2 Pressing the reset button once stops the timer pressing it again for more than 5 seconds resets the timer 3 Pressing the reset button once stops the timer pressing it again for more than 5 seconds returns the timer to real time display Timer Reset Mode 0 When the timer is reset the timer is set to the Starting time 1 When the timer is reset the timer is set to the Ending time Timer Alarm Control O disabled 1 turn off alarm when the timer reset down button is pressed default This mode is used with modes 32 24 1 32 26 1 and various code blue modes When mode 32 26 1 then set mode 37 12 0 Counter Auto increment rate period O tenths of second 1 second default 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com iin e
171. hours minutes and seconds are set The date may be manually set use the clock s control buttons Once set the date will increment normally Alarm master slave control O disable default 1 enable separate start stop and warning alarms 2 combine start stop and warning alarms into the main relay output When using wired sync slave clocks may follow the alarm sounding of a master clock This allows one clock to control the alarm sounding of several alert horns For example one master clock could contain the alert horn schedule for the entire plant Several slave clocks with the AL or AH alert horn options could be controlled by the alarm schedule of the master clock Both Master and Slave clock must have Mode 32 16 enabled for this method to operate Set to a value of 2 to activate the slave relay when either start stop or warning alarms are activated Timer Direction Auto reverse 0 do not reverse timer direction when the end time is reached default 1 When the end time is reached reverse timer direction from down to up and continue with elapsed time This only applies to a down timer 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions Mode 13 is ignored Direction reverse for medium duration timers requires version 4 50 or later Long
172. ic default 1 reversed alarm relay output logic Decimal Point Reverse 0 disabled default 1 move decimal point on Display Mode 47 from top to bottom Long Duration Timer Display Format Display Zone 1 Default 21 This mode determines the display zone one format for long duration timer operation When Mode 32 18 1 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com nae SC First Menu Second Level Menu Mode Number Level 2 10 12 20 22 30 0 99 tenths of a second 0 99 tenths of a second Mode Description and Instructions Long Duration Timer Display Format Display Zone 2 Default 2 This mode determines the display zone two format for long duration timer operation When Mode 32 18 1 Long Duration Timer Display Format Display Zone 3 Default 2 This mode determines the display zone three format for long duration timer operation When Mode 32 18 1 Time Adjustment Range This mode determines the scale used by Mode 4 to adjust the real time clock 0 Seconds per month 1 Seconds per year default A setting of 1 or seconds per year is recommended when the high precision oscillator is installed HX option See also Mode 4 Timer Precision Control O disabled default 1 enabled This mode improves timer precision when displaying fractions of a second but changes the real time seconds each time timer is start
173. idual alarm output pulsing default 1 94 alarm pulses per second for individual alarm settings 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO o First Menu Level Mode Number Second Menu Level timer auto start Display format number Mode Description and Instructions Reboot Clock Program at the Alarm Time 95 Reboot the clock software at the alarm time This will also perform a hardware reset on the Ethernet interface Sunrise and Sunset Alarms 96 Activate the alarm at the specified sunrise and sunset time See Modes 61 62 63 and 64 to configure the sunrise and sunset parameters See also Mode 29 day codes 97 Activate the alarm at the specified sunrise time See Modes 61 62 63 and 64 to configure the sunrise and sunset parameters See also Mode 29 day codes 98 Activate the alarm at the specified sunset time See Modes 61 62 63 and 64 to configure the sunrise and sunset parameters See also Mode 29 day codes 99 Timer Control Activation by Alarm Schedule If this setting is 0 when the alarm sounds and Mode 32 13 0 the alarm will remain on for the entire selected alarm duration period A value of 1 94 determines the number of times the alarm is pulsed per second for the individual alarm setting selected For example if the alarm duration is set for three seconds and Mode 34 1 98 is set for 2 pulses
174. ime Time is received from the Obtains highly accurate Antenna must have a view 495 Receiver U S Government s Global time directly from military of the sky Requires line 595 Positioning System satellites Worldwide from clock to antenna Used mostly on master coverage Good long term clocks Provides absolute reliability Window timing accuracy antennas are available IRIG B Time Time is distributed over Obtains time from existing Dedicated wiring required 250 Receiver dedicated time network dedicated time network wiring Typically used for missile and space applications compatible with military and space systems 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 120 no ee Midnight Reset or Time correction pulses may The clock can be configured Requires dedicated wiring 25 PLC Reset be received from older to expect resets at a variety master clock systems of times and periods Not computers or PLC s prone to interference Power Line Time date and other datais No new wires medium cost Electrical distribution 100 Communications distributed over existing reliable transformers block the time power lines signal Radio Sync Time data is sent to clocks No sync wires required Cost comparable to wire 125 using time proven UHF high reliability very long sync systems for large radio pa
175. imer This feature is intended to prevent the timer from running at a different rate than the real time clock When this mode is active the timer will not increment unless sync data is received once per second When sync data is receive the timer seconds are set to the sync seconds received A down timer will use the difference between sync seconds received and 59 to produce the correct value 2 Updates the time and date while in timer or counter mode A setting of 1 only updates seconds while in counter mode Accelerated Timer for Special Effects Speed up elapsed timer for special effects 0 disabled default 1 9 for faster timer operation Scheduled Alarm Time Activation O deactivate scheduled alarms l activate scheduled alarms default Close Alarm Relay When Timer Started and or Stopped O deactivate default l activate alarm when timer started 2 activate alarm when timer stopped 3 activate alarm when timer started and stopped 4 activate the alarm while the timer is running Also set Mode 32 10 0 default This selection will cause the alarm relay to activate when the timer is started and or stopped The alarm will activate for a period determined by the alarm duration value Mode 5 See also Mode 37 9 Real Time Clock Chip Installed 0 DS1307 default 1 DS1302 this value is set at the factory Dual Relay Output 0 disabled default 1 enabled Red Yellow Green light mode using two relays also set M
176. ing defenses thereto concerning the validity enforceability or infringement of any patent copyright or trademark including trade dress and service mark right 6 Severability A determination by any entity with jurisdiction that any provision of this Agreement is unenforceable shall be severed from the remainder of this Agreement which shall remain in full force and effect and shall not be invalidated thereby 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com iin eee Overview BRG commercial digital clocks are specifically designed for applications where precision and reliability are of utmost importance These clocks may be used as accurate stand alone time displays or they can be synchronized so that all clocks display the same time Further by using the GPS CDMA or other atomic time receiver options all clocks can display the same accurate legal time This means all clocks will not only display the same time but the time displayed is the true legal U S time Any combination of clock shape style or size may be synchronized These clocks are in use by many organizations where accurate synchronized time is required Each clock provides a variety of time zone and display formats including UTC Zulu Time Any World Time Zone Half hour time zones Enable or Disable Daylight Savings Time and selectable 12 or 24 hour display formats with digital intensity
177. ing rate for serial data received on the SR ST port This will increase the reliability of serial data received on slow displays See also Modes 32 40 and 45 17 CDMA Daylight Saving Time Rule 0 No Daylight Saving Rule 10 U S Daylight Saving Rule default This value determines the rule to be used when stripping daylight saving time from the time received for a time zone display using with CDMA receiver The daylight saving offset is removed to allow converting local time to UTC Daylight Saving Time End Hour Offset Default 2 default 2 for 02 00 This mode determines the hour to switch between standard and DST for custom DST rules both North and South of the Equator including leap years Daylight Saving Time Begin Hour Offset Default 2 default 2 for 02 00 This mode determines the hour to switch between standard and DST for custom DST rules both North and South of the Equator including leap years Time Reception Port Control 0 default receive time on both ports if configured otherwise does not receive remote GPS time packet either over the air or from Ethernet 1 receive time on SR ST port only does not receive remote GPS time packet either over the air or from Ethernet 2 receive time on GPS port only does not receive remote GPS time packet either over the air or from Ethernet 3 do not receive time on any port does not receive remote GPS time packet either over the air or from Ethernet 4 receive time on
178. intensity This option is typically used in areas where lighting conditions change such as video conferencing rooms and communications centers Special Controls and_ Devices 0 no special devices present default GPS 9600 SRST 9600 600 1 WWVB receiver GPS 300 SRST 9600 600 2 GPS receiver GPS 9600 SRST 9600 600 In addition to setting the time and date coordinate data may be set to calculate Sunrise Sunset and Sidereal time See also Mode 26 and Mode 45 14 ver 3 26 3 CDMA receiver GPS 9600 SRST 9600 600 4 SMPTE IRIG B ESE receiver GPS 2400 SRST 9600 600 see also 32 15 13 5 Thumb Wheel Switch or Keypad on GPS port GPS 9600 SRST 9600 600 6 DATUM Tymserve 2100 GPS receiver GPS 9600 SRST 9600 600 7 Use the GPS port for 9600 baud serial sync and the SR ST port for 600 baud power line sync or 9600 baud serial sync GPS 9600 SRST 9600 600 This is the same setup as 0 except serial sync transmits on the GPS port and the sync light will activate when sync data is received 8 9600 baud SR ST port and 9600 or 600 baud GPS port PL transmit only GPS 9600 600 SRST 9600 9 Enable Mode 32 56 and Mode 32 57 selectable serial port baud rate 10 CDMA receiver Model MTSMC reception of local time is assumed If Zulu time is required for a multi time zone display set Mode 21 x as needed and set Mode 32 8 2 and Mode 45 5 to the local time zone The clock is updated once per minute at 22 seconds af
179. ion overrides the intensity set in Mode 3 the selected four digit display default 0 See also Mode 32 14 optional Auto Brightness Control Blinking Individual Display The mode determines if one or more four digit displays will blink once per second O disables blinking 1 enables dim blinking 2 dim blink while alarm active 3 blinks the display full off and on while alarm active 4 pulse the display full on and off at the alarm pulse rate GPS automatic coordinates for Sunrise Sunset and Sidereal Time 5 Set Sunrise Set coordinates for the selected zone when using a GPS receiver 6 Set Local Sidereal Time coordinates for the selected zone when using a GPS receiver Timer Starting and Ending Times 7 Display the timer Start Time at the selected display position 8 Display the timer End Time at the selected display position 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BR o FNO o First Menu Level Mode Number Second Menu Level 1 99 alarm setting 1 99 alarm setting 1 99 alarm setting 00 to 59 0 15 day code Mode Description and Instructions Change Display Intensity While Alarm Active 9 change the display intensity while the alarm is active The dimming value to use is set by Mode 37 60 1 15 The intensity will be returned to the original intensity when the alarm goes inactive See also Mode 37 60 M
180. l return to normal display mode Restore User Default Configuration This mode may be used to retrieve the custom configuration from memory if it was previously stored using mode 50 6 To execute the configuration retrieval process press the mode button while 50 5 is displayed The clock will resume normal 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 108 r iin EE First Menu Level Mode Number Second Menu Level Mode Description and Instructions operation after the configuration is retrieved Version 2 35 or later Save User Default Configuration This mode is used to store a custom configuration Use mode 50 5 to restore the configuration To execute the configuration save process press the mode button while 50 6 is displayed The clock will resume normal operation after the configuration is saved Version 2 35 or later Digital Lettering Character String O exit menu level 1 255 alpha characters This mode is used to edit the digital alpha characters These characters are used for zone titles on time zone displays and general message displays You can enter a message up to 255 characters regardless of the number of alpha digits installed If the message length exceeds the number of digits installed the message can be displayed by rotating the message into view one section at a time See also Mode 51 6 to determine time zone offsets for
181. lay format to minutes and seconds Mode 37 10 3 holding down the reset button for 5 sec or more returns the timer to real time Up timer starting at zero Stop the timer at ten minutes and sound the alert horn for five seconds Display hours and minutes on a four digit display with blinking colon while timer is running Mode 23 1 24 display to 24 hour format Mode 5 5 set alarm duration to 5 seconds Mode 7 0 00 reset to zero Mode 9 0 10 end time to 10 minutes Mode 13 1 stop timer at the end time Mode 14 2 set up timer direction Mode 20 1 3 display hours and minutes with blinking colon SO a Up timer starting at zero Stop the timer at 10 minutes and sound the alert horn for five seconds Display hours and minutes on a four digit display with blinking colon while timer is running Mode 23 1 24 display to 24 hour format Mode 5 5 set alarm duration to 5 seconds Mode 7 0 00 reset to zero Mode 9 0 10 end time to 10 minutes Mode 13 1 stop timer at the end time Mode 14 2 set up timer direction Mode 20 1 3 display hours and minutes with blinking colon SLO d Up timer using only the Start button to start stop and reset the timer Start at zero and count up After the timer has ran for five seconds allow the Start button to stop the timer When the timer is stopped the start button will reset the timer and start it running again Display minutes and seconds only 1 Mode 13
182. lay position a dot on the display indicates negative Mode 62 n 6666 n display position a dot on the display indicates negative Sunrise Sunset_Longitude Integer If the Longitude integer is negative then the Longitude decimal fraction must also be negative Enter West longitudes as negative values Mode 21 n must be set to display Sunrise Sunset times for a time other than UTC See also Modes 32 35 32 36 and Display Modes 56 57 58 and 59 See also Mode 34 to activate an alarm at the Sunrise Sunset time Local Sidereal Time Offset Degree This parameter is also used to define the Longitude offset for Local Sidereal Time in degrees To enter an offset to UTC enter a negative number for degrees West and a positive number for degrees East See also Modes 62 and 64 to enter the decimal portion of the offset See also Mode 72 to enable disable Sidereal Time Sidereal Time Example 97 degrees 37 minutes 45 seconds West Convert to decimal 97 37 60 45 3600 then make it negative for Western Longitude 97 62916666 degrees Mode 63 n 97 n display position note the negative value Mode 64 n 6291 n display position a dot on the display indicates negative Mode 62 n 6666 n display position a dot on the display indicates negative Sunrise Sunset_Longitude Decimal Fraction If the Longitude integer is negative then the Longitude decimal fraction must also be 600 N River Street Derby Kansas 67037
183. led disable relay output 18 Mode 43 2 0 01 Set warning time one minute before stop time 19 Mode 43 4 5 Blink the display for five seconds 20 Mode 43 5 20 Blink the display twenty times per second Down timer starting at ten minutes and counting down to zero then stopping Flash the display for five seconds when the timer stops Display minutes and seconds on a four digit display Mode 23 1 24 display to 24 hour format Mode 5 5 set alarm duration to 5 seconds this also controls the length of time to flash the display Mode 7 0 10 set Starting hours and minutes Mode 13 1 stop at the end time Mode 14 3 set down timer direction Mode 20 1 12 display minutes and seconds Mode 26 1 4 flash the display full on and off at a rate determined by the alarm pulse rate mode 32 13 Mode 32 13 10 flash the display at a rate of ten times per second CoO IN nes E Down timer starting at 30 seconds and counting down to zero then stopping Close the alarm relay while the timer is running Use either the timer control button or the start button to start timer Use the Change Start Change End buttons to change the Starting time time Display seconds only centered on the display Mode 8 30 timer Start equals 30 seconds Mode 14 3 set operating mode to count down timer Mode 32 4 2 stay in timer mode when the end time is reached Mode 32 5 1 set code blue timer direction to down timer Mode 32 2
184. log and Digital clocks using 512 bps Message Board and Wireless Time Receiver Transmit Point Default 10 This mode determines when the Tiger processor will send a time update command to the message boards and wireless time receivers Chouchin Wireless Analog Clock Movement Support The current recommended settings for either Chouchin or Shengbang movenents are Mode 37 62 7 and Mode 37 76 0 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com r RT i 7s Nt First Menu Level Mode Number Second Menu Level Mode Description and Instructions Chouchin Movements require Tiger Version W4 75 or later 0 activate full time reception only on the days of DST default This setting is for Chouchin or Shengbang movements with the hands installed at the 10 00 position and Mode 37 62 9 If Mode 37 62 9 then on the day to switch from ST to DST or DST to ST and the previous day no transmissions will occur if the hour is less than 2 or greater than 19 1 activate full time reception once per month on the Ist If Mode 37 62 7 or 9 then on the first day of the month no transmissions will occur when the hour equals 0 22 or 23 2 activate full time reception twice a month on the Ist and 15th If Mode 37 62 7 or 9 then on the first and fifteenth day of the month no transmissions will occur when the hour equals 0 22 or 23 3 activate full time reception e
185. m 128 310 AE EOF EI Power over Ethernet Option PoE Power over Ethernet PoE is a network standard based on IEEE 802 3af that provides a means of delivering power to devices connected to the LAN This technology eliminates AC electrical wiring wall transformers allows centralized UPS backup and is fully compatible with both powered and non powered Ethernet devices In addition to providing time synchronization and control over Ethernet PoE enabled Ethernet cable provides power to the clock System installers need run only a single Ethernet cable that carries both power and data to each clock This allows greater flexibility placing clocks and in most cases significantly decreases installation costs BRG clocks are fully compliant with the IEEE 802 3af standard for providing power over Ethernet The clocks will work with older non standard and passive power sources as well as newer auto sensing PoE switches and mid span power injectors Power over Ethernet begins with a Ethernet power source such as a PoE compatible Switch or a mid span power Injector These devices insert power onto the Ethernet cable The power source is typically installed in the Wiring closet near the Ethernet switch or hub Clocks may be ordered as PoE compatible by adding the P13 power option This option adds the necessary circuitry to fully implement the IEEE 802 3af standard PoE is able to supply a maximum of about 15 watts of power over the Ether
186. may be accessed from one or more PC s anywhere over the network Data Radio Channel 450 MHz and 900 MHz radios This mode determines the radio channel to be used 1 16 1 default 406 420 MHz and 450 470 Mhz Set Mode 32 15 7 UHF radio channel frequency assignments prior to 10 20 09 Channel Frequency CTCSS 1 464 650 100 2 464 600 100 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 3800 295 0220 First Menu Second Value Mode Description and Instructions Level Menu Range Mode Number Level 462 450 462 425 462 400 464 650 464 600 462 450 462 425 462 400 464 650 464 600 462 450 462 425 462 400 464 6375 UHF radio channel frequency assignments beginning 10 20 09 and later Channel Frequency 464 650 464 600 462 450 462 425 462 400 462 375 462 350 462 325 462 300 462 275 462 250 462 225 462 200 464 650 462 450 460 400 100 UHF radio channel frequency assignments for the 406 420 MHz government band Channel Frequency CTCSS 411 7125 100 412 4125 100 413 3125 100 414 2875 100 415 0625 100 411 7125 123 412 4125 123 413 3125 123 414 2875 123 415 0625 123 411 7125 412 4125 413 3125 414 2875 415 0625 411 6375 20 default for 900 Mhz U S Canada radio channel scan all channels in receive 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com
187. mbers together and then adding 128 to that value For example if Mon Wed and Fri are required then the valu would be 149 14 4 16 128 149 Alarm Day of the Week Padding Mode 29 n I AACCZZXXXXXXXXXXXXXXXXKXXXKXXXXXX CC 74 ZZ 0 00 All positions including and after ZZ will be replaced with 0 Long Timer Target Date Modes 44 1 44 2 AACCDDMMYYYYXXXXXXXXXXXXXKXXXKXXXXF CC 51 DD day MM month YYYY year Medium Duration Timer Days Reset Value Mode 35 1 AACCNNNNNNNNNXXXXXXXXXXXXXXXXXXX CC 54 N End count 99999999 to 99999999 600 N River Street Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com 148 s 800 295 0220 12 JBRG Medium Duration Timer Hours Reset Value Mode 35 2 AACCNNNNNNNNNXXXXXXXXXXXXXXXXXXX CC 60 N End count 99999999 to 99999999 Counter Start Value Mode 11 AACCNNNNNNNNNXXXXXXXXXXXXXXXXXXX CC 56 N End count 99999999 to 99999999 Counter End Value Mode 12 AACCNNNNNNNNNXXXXXXXXXXXXXXXXXXX CC 55 N End count 99999999 to 99999999 Set Count AACCNNNNNNNNNXXXXXXXXXXXXKXXXXXXXF CC 57 N End count 99999999 to 99999999 Elapsed Days Start Value Mode 35 1 AACCDNNNNNNNNNXXXXXXXXXXXXXXXXXX CC 58 D 1 days N End count 99999999 to 99999999 Elapsed Hours Start Value Mode 35 2 AACCDNNNNNNNNNXXXXXXXXXXXXXXXXXX CC 58 D 2 hours N End c
188. me S Data g Clock CS S AQ to PC e s a BLACK SYNC RECEIVE SR Serial ov R I ag Port DAS g Ki S SYNC TRANSMIT ST Clock PC Serial Port Adapter SYNC WIRE TO MORE CLOCKS Example 2 Send time date from CLOCK to PC e RS 232 eme O to PC N SO Data from Clock sonal ba J en I RED SYNC TRANSMIT ST Port HR tC BLACK Clock PC Serial Port Adapter WENER MORE CLOCKS 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 141 BiG ee EEN Serial Sync Communications Protocol serial communications 9600 baud 8 data bits no parity the time date and data string is 35 bytes long beginning at position 0 begin data string position 0 length 1 time position 1 length 2 seconds time position 3 length 2 minutes time position 5 length 2 hours date position 7 length 2 day date position 9 length 2 month date position 11 length 4 four digit year count position 15 length 9 count used for event counter mode misc data position 24 length 1 btime_source a one is required when sending time to the clock misc data position 25 length 1 alarm_master_slave O invalid 1 alarm on 2 alarm off misc data position 26 length 1 alarm2_master_slave O invalid 1 alarm on 2
189. means No New Wires All digital clocks within a one mile diameter circle around the master clock will display the same time by simply communicating over existing power lines The distance between the master and slave clocks may be up to 1 500 feet 500 meters depending on line loading and other factors Furthermore slave clocks may be configured to repeat the time signal for total range up to 3 000 feet 1 000 meters between the master and slave clocks This amounts to a communications area over one mile in diameter Power Line sync will not pass through electrical distribution transformers Multiple master clocks or Ethernet sync may be used overcome limitations imposed by multiple distribution transformers Operation Mode Mode 32 20 controls the power line synchronization operating modes 0 disabled default 1 Transmit this mode is used on the master clock to send time and date data to slave clocks By default sync data is transmitted every ten seconds when the seconds end in zero i e 10 20 30 40 50 2 Repeater This mode allows the clocks to both receive and transmit power line sync data This effectively repeats or doubles the range of the signal It will receive data from a master clock sending data when the seconds end in zero It will transmit sync data every ten seconds when the seconds end in five i e 5 15 25 35 45 55 3 Receive This mode allows the clock to receive power line sync data from either a transmitter o
190. mer Control to save and exit Alarm Set Time Seconds This mode is used to set the alarm seconds There are 99 possible settings Mode 29 determines the day s to activate the alarm s A day code must be set to enable alarm Alarm Day Code This mode is used to set the alarm day code The possible values for each alarm setting are 0 no alarm 1 Monday 2 Tuesday 3 Wednesday 4 Thursday 5 Friday 6 Saturday 7 Sunday 8 Everyday 9 Weekdays 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com iin eee First Menu Level Mode Number Second Menu Level 1 99 alarm setting 0 99 seconds Mode Description and Instructions 10 Sat Sun 11 Mon Wed Fri 12 Tue Thu 13 Tue Sat 14 Mon Thu 15 Mon Sat Display and time source number is used for alarm activation in multi display clocks In addition to day of the week combination codes Mode 29 also accepts any day combination A value greater than 128 is treated as a binary command Days of the week are assigned the following binary numbers Mon 1 Tue 2 Wed 4 Thu 8 Fri 16 Sat 32 and Sun 64 Any combination of days may be selected by adding their assigned numbers together and then adding 128 to that value For example if Mon Wed and Fri are required then the value would be 149 1 4 16 128 149 Individual Alarm Output Duration This mode controls individual alarm output duratio
191. mission then analog clocks should be manually set to the correct time during installation so they will receive updates Or Mode 37 77 could temporarily set to 59 Beginning with Tiger version W4 82 Mode 37 77 default equals 10 After power up time is sent to analog clocks every minute Five days after the last power cycle or reset time is only sent to master clocks for eleven minutes at hours 1 2 3 4 6 11 15 and 20 Time is sent while the minute is less than 11 This reduces time 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO First Menu Level Mode Number Second Menu Level Mode Description and Instructions transmissions from 1440 to 88 times per day A software reset or power cycle will reset the clock for another period of five days of once per minute transmissions The five day period allows time to install clocks during the initial installation When installing clocks after the five day period they should be manually set to the correct time using the button on the back or the master clock can be reset to restore transmissions every minute for another five days To restore sending time to analog clocks once per minute indefinitely set Mode 37 77 to 59 2 4 GHz and 900 MHz Wireless Analog Time Zone Clocks 0 Disabled 1 18 Number of analog clock zones 8 default 2 4 GHz Wireless Analog Time Zone Clocks using an
192. mode disabled Mode 75 4 n physical channel number 0 15 14 default Mode 75 5 n logical channel group 0 15 0 default Mode 75 5 15 transmits and 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 118 First Menu Mode Description and Instructions Level Mode Number receives on all channels Mode 75 6 n 1 reboots the radio 2 restore initialization defaults Mode 37 67 configures the port used for CEL commands 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 119 no NEE Time Synchronization Method Comparison Chart BRG Precision Description Advantages Disadvantages Cost Sync Methods per Clock 59 Minute Time correction pulses are Compatible with many older Time data only date is not 25 Impulse sent hourly over dedicated analog clock systems uses updated however all BRG Correction wiring existing dedicated clock digital clocks will wiring automatically maintain the correct date Bi Polar Impulse Time correction pulses are Compatible with many Time update pulses only no 25 Time Receiver sent every minute over analog clock systems uses time or date data is sent or dedicated wiring existing dedicated clock received However all wiring low cost BRG digital clocks will automatically maintain the correct date CDMA Tim
193. modules 0 Turn off relay 1 Turn on relay 12 H2S 1T 13 H1S L1S 3T 14 H2S 12S 4T 15 H10S L10S Z 16 H20S L20S Z 17 H1S LIS Z 18 H0 5S L0 5S Z 19 H6S L1S Z 21 H0 2S L10S H0 5S L10S H1S L10S H2S L10S HZ 22 H0 5S 1T 23 H3S IT 24 H20S 1T 25 H3S L3S 10T 26 H2S L2S 20T 27 H1S LIS 30T 28 H0 5S LO 5H 30T 29 H30S 1T 31 H0 5S 1T 32 H1S 1T 33 H3S IT 34 HSS IT 35 H8S IT 36 H10S IT 37 H12S 1T 38 H30S IT 39 H50S IT 41 H1min 1T 42 H2min 1T 43 H5min 1T 44 H8min IT 45 H10min 1T 46 H 15min IT 47 H20min 1T 48 H30min 1T 49 H45min IT 51 H1hour 1T 52 H2hour 1T 53 H3hour 1T 54 H4hour 1T 55 H6hour 1T 56 H8hour 1T 57 H12hour 1T 58 H13hour 1T 59 H24hour 1T Wireless Transmitter Alarm Configuration Example 1 Sound 3 second alert tone at 8am 12pm 1pm and 5pm Monday thru Friday The 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB Se First Menu Level Mode Number Second Menu Level Mode Description and Instructions tone generator is attached to alarm channel 1 27 1 08 00 8am alarm time 27 2 12 00 12pm alarm time 27 3 13 00 1pm alarm time 27 4 17 00 Spm alarm time 29 1 9 alarm number active Monday through Friday 29 2 9 alarm number 2 active Monday through Friday 29 3 9 alarm number 3 active Mond
194. mware the Software program stored in processors and or memory on hardware manufactured by BRG Precision Product s Inc The software is copyrighted You may not rent distribute or transfer copies of the software modify disassemble decompile extract from the hardware or translate the software or documentation make any copies of software modules for use with other programs This license is effective until terminated You may terminate it at any time by discontinuing the use of the hardware containing the software It will also terminate automatically if you fail to comply with any of the terms and conditions of the Agreement Upon termination of this license for any reason you agree to discontinue the use of the software This Agreement constitutes the entire agreement and understanding between the parties and supersedes any prior agreements representations or understandings whether oral or written relating to the Software This Agreement shall be governed by the laws of the State of Kansas Limited Warranty BRG Precision Products Inc warrants that the processors or memory use to store the software is free from physical defects in material and workmanship under normal use for a period of sixty days from the date of purchase THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND IN LIEU OF ALL OTHERS ORAL OR WRITTEN EXPRESS OR IMPLIED BRG PRECISION PRODUCTS INC MAKES NO WARRANTY OR REPRESENTATION EXPRESS IMPLIED OR STATUTORY WITH
195. n At this point you can change the time and by pressing the mode button you enter the menu system to change the real time month day and year Pressing the timer control button again will return to long duration timer mode See also Modes 32 17 32 18 37 34 37 35 37 36 and 37 40 Ending Year This selection is used in conjunction with modes 9 and 10 Ending hours minutes and seconds See also Mode 32 18 to enable long duration timer mode While in long duration timer mode pressing the timer control button will temporarily switch to real time operation At this point you can change the time and by pressing the mode button you enter the menu system to change the real time month day and year Pressing the timer control button again will return to long duration timer mode See also Modes 32 17 32 18 37 34 37 35 37 36 and 37 40 Counter Auto increment Amount The counter will auto increment by the designated amount for the period indicated in mode 45 2 The Up Start Pause button pauses and resumes auto increment 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BR o FNO o First Menu Level Mode Number Second Menu Level 9999 to 9999 12 to 12 Mode Description and Instructions Counter Auto increment Rate Value The counter will auto increment by the amount designated in mode 45 1 Mode 37 13 determines whether this value is tenth
196. n Mode 5 controls the output duration for all alarm times Mode 30 overrides Mode 5 for specific alarm duration values For example this mode may be used when one alarm tone needs to be longer or shorter than other alarm tones A value of zero allows Mode 5 to control alarm output duration For extended alarm duration beyond 99 seconds see Mode 45 15 This mode is a multiplier for the alarm duration setting It allows an alarm duration up to 12 days See also Mode 32 13 Mode 34 for pulse alarm operation and Mode 37 56 for wireless alarm systems Sync Status General purpose clock sync indicator using decimal point or blinking colon O disable default 1 enable While enabled the PM indicator will flicker at the top of the minute if the displayed time is in sync with a radio sync pulse wired sync data GPS or CDMA time receivers 2 if PL or SR sync signals received then change the display mode to 3 blinking colon 3 if SR sync signal lost then blink the colon Set 32 15 7 to activate the sync indicator on the SR port Ethernet and wire sync See also Mode 37 65 to configure the sync status timeout delay Sync Status Special Sync indication using decimal point or blinking colon O disabled 1 turn on decimal when sync received default GPS CDMA IRIG B 2 turn on decimal when sync is lost GPS CDMA IRIG B 3 blink colon once per second when sync received must use display mode 2 GPS CDMA IRIG B Ethernet 600 N
197. n a BRG digital master clock are the default in the RC100TZ and do not require modification Example for RC100TZ 2 4 GHz analog time zone systems To configure 5 analog time zone clocks with the transmitter receiving time from Ethernet NTP and the radio connected to the GPS port Mode 21 1 zone 1 offset Mode 21 2 zone 2 offset 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com iin eee N First Menu Level Mode Number Second Menu Level Mode Description and Instructions Mode 21 3 zone 3 offset Mode 21 4 zone 4 offset Mode 21 5 zone 5 offset Mode 24 1 zone 1 DST rule Mode 24 2 zone 2 DST rule Mode 24 3 zone 3 DST rule Mode 24 4 zone 4 DST rule Mode 24 5 zone 5 DST rule If necessary set Mode 33 for the respective zone to force half hour time offsets Mode 18 8 default supports 8 or less zones Mode 37 78 8 default configure for 5 transmit channels 2 4 GHz Wireless Analog Time Zone Clocks using a BRG digital master clock BRG digital clocks incorporating a 2 4 GHz radio and be used as a master clock to drive analog clocks in a time zone array Each analog clock incorporates a 2 4 GHz receiver configured to receive a single zone The master clock transmits a time packet to all clocks All BRG analog clock movements are supported The Tiger master clock must be Tiger version 4 75 or later The 2 4 GHz master clock radi
198. nce 9 Amendment and Waiver No amendment supplement consent or waiver express or implied to or of any provision of this Agreement will be effective unless in writing signed by the parties hereto and then only in the specific instance and for the specific purpose given 10 Assignment The Customer may assign or transfer this Agreement provided BRG Precision Products Inc is advised by the Customer in writing of such assignment and the new system owner s information 11 Governing Law This Agreement will be governed by and interpreted exclusively in accordance with the laws of the State of Kansas without reference to provisions concerning conflicts of laws The provisions of the United Nations Convention on Contracts for the Sale of Goods are hereby excluded 12 Arbitration Any controversy or claim arising out of or relating to this Agreement or the breach of it shall be settled by arbitration in accordance with the relevant rules of the American Arbitration Association and judgment on the award rendered by the arbitrator may be entered in any court having jurisdiction thereof The place of arbitration shall be Wichita Kansas United States of America There shall be one arbitrator 13 Severability If any provision of this Agreement is found by any court or arbitrator to be invalid illegal or unenforceable the validity legality and enforceability of the remaining provisions will not be affected thereby 14 Entire Agreemen
199. nchronized clock system event counters elapsed timers time zone display etc Standard Features Available Ultra reliable red light emitting diode L E D bar segment display Anti glare lens allows viewing under most lighting conditions Quartz oscillator for high accuracy Time adjustment register to further increase accuracy 10 year lithium battery uses one millionth of a watt in standby mode Blinking Solid or No Colon between hours and minutes Digital Intensity Control individual display or all displays Seconds smaller than hours minutes for easy viewing in 8 digit display models 99 total alarm settings with 12 day of the week variables 98 alarm schedule groups Alarm schedule activation by date range Variable duration for each alarm setting Variable pulsing for each alarm setting Display can be set to blink when alarm is active or as silent alarm Timer with flashing warning alarm for speaking engagements Enable Disable auto switching between daylight and standard time includes world date table Up Down Event Counter range 9999 to 9999 with Start End and alarm Counter auto increment with adjustable increment amount and period Up Down Elapsed Timer Days Hours Minutes Seconds Hundredths with Start End and alarm Display optionally blinks when the alarm activated Rotating display formats i e time gt date or time gt temperature Sunrise Sunset Calculations Automatically dim display at nighttime
200. nd shipping to send the replacement product The customer is responsible for expedited shipping charges over the cost of ground shipping The customer is responsible for shipping charges to return the defective product The Replacement Service is only available for shipments to the U S and Canada When the customer receives the replacement product the defective product must be returned to the factory within 30 days The invoice for the replacement product will then be voided otherwise the full invoice amount for the replacement product is due This service is only available in conjunction with warranty repairs This replacement service may be purchased for 10 of the products purchase price at the time of the initial purchase The replacement service may also be purchased after the initial product purchase and before the standard warranty expires for 15 of the product purchase price The term of this service ends when the warranty expires This service may be repurchased for 10 of the product purchase price when a two year extended warranty is purchased The product replacement service is only available on selected models 30 Day Return Policy No returns will be accepted without prior written authorization of BRG Incorrect merchandise received will receive prompt re shipment of correct items Incorrect merchandise other than custom items may be returned shipped prepaid and will be exchanged on an equivalent basis Merchandise other than
201. net cable This means that not all clocks are candidates for PoE If the access point is not PoE compatible BRG offers single port mid span power injectors designed to provide power to a single clock P14 power option Multiport mid span PoE power injectors are available from most network equipment vendors The voltage injected is 48 volts DC at 0 35 Amps Power Over Ethernet PoE Customer supplied Ethernet switch with internal 48 volt PoE supply Bre allelic with PoE option Ethemet Cable up to 100m or 325ft Customer supplied Ethernet switch with mid span 48 volt PoE supply S00 8888888 eee Switch Pe BEE EEE au Injector Customer supplied Ethernet switch with single external PoE supply SS SS8888 Fees Switch Ethernet Cable up to 100m or 325ft Ethernet Cable up to 100m or 325ft BRG Digital Clock with PoE option BRG Digital Clock with PoE option BRG Supplied Ethernet Power Injector BRG Supplied AC Power Adapter 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 129 BiG ea EEN Digital Radio Synchronization BRG offers two type of digital radios for clock synchronization control and mass communications The 400 MHz UHF digital radio system is a high power system for very large coverage areas This system requires an FCC license and is used primarily for clock synchronization and mass communications The 900
202. ng the menu system SR E Precision Products START STOP RESUME RESET CHANGE CHANGE START END TIMER CONTROL BRG Precision Products Digital Time Display 800 295 0220 316 788 2000 Actual Size Target Hours Minutes Press once to access hours minutes fa Press Up or Down to change Press again to exit Increment Number Displayed s Decrement Number Displayed 600 N River Street e Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com 800 295 0220 BRG Keypad Parameter Entry Two optional keypads are available for entering various parameters such as start time start count end time end count start date end date etc The keypads are available in 12 button and 16 button configurations The 12 button keypad may be placed on the front side top or bottom of the display but does not include control buttons The 16 button keypad may be mounted on the front of the display or in a wired remote control box and includes control buttons 12 button keypad Change Start Change End 16 button keypad uiun Bu Control E oE B reene Raset D D E Change Start Change End Up to two parameters may be entered For example if Mode 37 26 equals 4 press to enter the start time and to enter the end time The and modes only need to be selected once for multiple entries of the same entry type The keypad times out after tw
203. nger receive correction pulses from the master clock If a single clock needs to be removed for any reason unplug the connector plug from the analog clock s pins The master clock may remain powered To return an analog clock to operation plug the connector back onto the analog clock s pins The clock will be corrected at the next regular sync interval 12 Analog Clock Analog Double Mount 16 Analog Clock WALL WAL MOUNTING f MOUNTING PLATE h PLATE STD SINGLE GANG BOX PLUG CONNECTOR S INTO BOTTOM OF MOVEMENT 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BBG ll We Digital Master Clock with 59 Minute Analog Secondary Clocks N We sf Sa wi V aap mmm N o WM MOA N To ei ET o N st ON pm V vowep N Orr P mM T MOTOR N o m o N a set wo Oasen ej KE oom Ir MOA rs To z m o T be s age Zey SS G Bn _ wn 7 O QE SO GB Cc NO 2 O gt 2 Operation Once the master clock is displaying the correct time changing the analog clocks to the correct time is fully automatic 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com eg HH EE Bi Polar Analog Master Clock Operation Description A single BRG digital clock may control up to 200 analog slav
204. ning light status This mode is used to switch between one of four fixed messages depending upon the condition of the warning lights If no lights are on message frame 1 is selected If the red light is on then message frame 2 is selected If the yellow light is on then message frame 3 is selected If the green light is on then message frame 4 is selected See also Modes 43 1 4 32 26 2 43 2 43 3 52 1 and 51 2 Alpha Frame Rotation Speed 0 59 seconds The higher the number the slower the display moves Automatic rotation is disabled when manual switching is enabled Mode 37 20 1 See also Mode 32 3 See Mode 32 20 when an array of synchronized frame rotating clocks will be used and each clock is to display a different frame Digital Lettering Character Sequence O normal 1 reversed default Digital Lettering Zone Position for Special Time and Date Characters This parameter is used in conjunction with special characters in the alpha digital lettering display Mode 18 must be set to the number of time zones that will be used Modes 21 and 24 must also be configured For example if the time is display on the digital lettering using special characters this parameter determines what time zone offsets and other rules apply to the time displayed If hour and minutes plus a colon is displayed on character position 10 15 then set Mode 51 6 10 through 51 6 15 to the desired zone position 1 24 If Mode 37 22 is greater than 0
205. ns will be omitted during a scheduled wireless alarm transmission to avoid conflicts The relay output of the transmitter clock can be used when wireless alarms are enabled beginning with version 3 67 Previous versions did not support simultaneous wired and wireless alarms It is recommended to enable four channel relay operation Mode 32 26 2 and place the wired alarms on channel 1 and the wireless alarms on channel 2 3 or 4 See also Mode 32 12 Addressable Wireless Speakers Audio may be played over addressable wireless speakers To enable this feature check Enable Alarms using Wireless Speakers in the Windows control program Setup gt Communications screen In the Alarm Schedule screen 1 Add a new record by clicking on Create New Alarm Record 2 Set the desired audio to be played under Wireless Relay Function and Audio Selection 3 Set the address under Wireless Speaker Address 4 Set Alarm Function to Wireless Speaker Alarm Requires Tiger master clock version 4 61 and Window control program 2 10 53 or later Direct Serial Connection to a Digital Clock The audio player can be directly connected to a Tiger digital clock s serial port To enable set Mode 37 56 gt 0 1 GPS port 2 SR ST port Set Mode 49 n 7 where n is the alarm schedule position number Set Mode 34 n xx where n is the alarm schedule position number and xx is the decimal file name converted from the hex file name Se
206. nters and more complicated displays The Mega processor is used where other features are needed that are not available in the Tiger processor or displays not requiring features found in the Tiger processor The factory will install the processor type most appropriate for the customer s requirements The menu will indicate the type of processor used Once in the menu system if the Mega processor uses leading zeros and the Tiger processor does not General Menu Navigation Clock Timer Counter configuration is accomplished by editing parameters using a simple menu system Only four buttons are used to navigate the menu The Mode button enters the Menu The Up and Down buttons move up and down through the menu items and are used to change parameter values The Timer Control button is used to save any changes and exit the menu system Operation Press the Mode button to access the menu system Using the Up and Down buttons select the desired menu item Press the Mode button again to display the parameter For menu items above 19 press Mode again to access the menu s second level When a one appears indicating the second level menu press the Up or Down buttons to select the desired menu item then press Mode to display the parameter value Press the Up or Down buttons to change the parameter value Once the parameter value is changed press Mode to back out of the item and move to another item or press the Timer Control button to save and exit
207. o Mode 32 55 Mode 32 42 and Mode 32 49 6 Addressable Clock Function with Active Up and Down buttons whether or not the clock as actively selected This mode is the same as Mode 37 29 5 except the Up and Down buttons remain active all the time whether the clock is actively selected or not For example a display could have three displays Two of the displays could show real time while the third displays may be a timer with external control that requires active Up and Down buttons The remote could be used to access any of the displays In this scenario if one of the real time displays is accessed you may see activity on the timer because the Up and Down buttons would be active on both the real time display and the timer See also Mode 32 55 Mode 32 42 and Mode 32 49 Circle Line Display Modes Set Mode 32 54 0 Mode 32 29 4 and Mode 32 63 1 0 disabled default 1 seconds with accumulated dots 2 seconds with single dot 3 accumulated dots starts over at zero 4 alternating dots every second 5 rotate and reverse dots every second 6 variation of rotate and reverse dots every second 7 rotate and reverse dots with inner circle blanked 8 another rotate and reverse dots with no inner circle rotate eight dots every second with no inner circle Auto Counter Pause Mode O display PAUS when auto counter is paused default 1 freeze time when auto counter is paused Alarm Output Logic Toggle 0 Normal alarm output log
208. o firmware must be BRG_analog_timezone_master_v11 py or later Analog slave clocks in a time zone configuration require CEL firmware BRG_analo_TZ_slave_zone_NN_V11 py where NN is the zone number of the clock Each analog clock is loaded with firmware for a specific zone Every time packet includes a zone identifier If an analog clock receiving the time packet matches the zone indicated it will use the time to update the clock The BRG digital master clock does not support primary and secondary master clock operation The 2 4 GHz radio defaults to channel 10 Set Mode 18 and Mode 37 78 to the desired number of zones Set Mode 32 12 1 to enable transmissions once per second Mode 37 67 3 configures the master clock to send time data out the GPS port to the CEL 2 4 GHz radio Example for BRG digital master 2 4 GHz systems To configure 5 analog time zone clocks with the transmitter receiving time from Ethernet NTP and the radio connected to the GPS port Mode 18 5 configure for 5 display zones Mode 21 1 zone 1 offset Mode 21 2 zone 2 offset Mode 21 3 zone 3 offset Mode 21 4 zone 4 offset Mode 21 5 zone 5 offset Mode 24 1 zone 1 DST rule 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com ifn eee First Menu Second Mode Description and Instructions Level Menu Mode Number Level Mode 24 2 zone 2 DST rule Mode 24 3 zone 3 DST rule Mo
209. o seconds of inactivity Allow an additional second for the parameters to save before activating the timer buttons If you make a mistake during entry wait at least three seconds and reenter 600 N River Street e Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com BRG N To enter a start time of 1 hour and 0 minutes with a stop time of 10 hours and 35 minutes and then start the timer running press the following keys 1 0 0 1 0 3 5 then wait at least three seconds and press A Since the was the last entry type selected it does not need to be selected again to change the end time again For example to change the end time to 12 hours and 34 minutes press 1 2 3 4 then wait at least three seconds and press A For single parameter modes pressing the and buttons is not required For example if Mode 37 26 equals 1 and you want to change the timer start time to 23 hours and 59 minutes enter 2 3 5 9 then wait at least three seconds and press A Entries are not always shown on the display as they are entered 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com eg SSeS TE EE Tiger Processor Configuration Menu Processor Type Two types of processors are typically used in BRG digital clocks Tiger and Mega The Tiger processor is usually found in timers cou
210. o work with older clocks set Mode 32 69 to 0 connect the GPS receiver then cycle power This will configure the GPS receiver to transmit GPS data continuously Enable Serial Port Time Sync Transmissions 0 disable both serial ports 1 enable SR ST port default 2 enable GPS port 3 enable both serial ports This mode is useful to limit time sync transmissions from going out the ports that could interfere with other devices attached to the port For example a clock configured with Ethernet on the SR St port and 900 MHz transmitter on the GPS port should only send time sync out the GPS port not the SR ST port Therefore Mode 32 70 should be set to 2 Reserved Force Time Advance This mode optionally forces a 30 to 60 minute time advance 0 no advance default 1 30 minute advance 2 60 minute advance 3 30 minute advance during daylight savings time only 4 60 minute advance during daylight savings time only 5 45 minute advance This is used in areas that have a 30 to 60 minute advance over the area time zone For example Mumbai India s time zone offset is 5 30 To configure the time zone first set the respective zone to 5 hours using Mode 21 Then set the same respective zone in Mode 33 to 1 Alarm Pulse Individual and Auto Start Timer Timer Control Line This Mode sets the number of times the alarm is pulsed per second for each alarm setting It overrides Mode 32 13 all alarm pulsing 0 disable indiv
211. oal actual counter displays 50 dd hh two digit days and hours no colon trailing decimal point 51 mmiss minutes seconds with pm indicator for discrete displays 52 9999 counter End value used for goal on second display 53 mm dd month and day where the day shifts left if less than ten 54 hh mm gt mm ss switch from hrs min to min sec when hrs 0 55 dd hh two digit days and hours no colon iin eee N First Menu Second Level Menu Mode Number Level 1 24 time source 1 24 display 1 24 display 1 24 time source 12 to 12 hours from UTC 1 24 time source Mode Description and Instructions 56 hh mm Sunrise hours minutes 57 hh mm Sunset hours minutes 58 hh mm Sunrise hours minutes with leading zero no colon military format 59 hh mm Sunset hours minutes with leading zero no colon military format 60 wwdd Elapsed weeks 0 99 and days 0 7 61 hh mm Update the hours and minutes only while the alarm output is active 62 xddx Day of the Month centered 63 PMxx AMxx AM PM using special two digit alphanumeric display 64 axxx Military Shipping Code A Z no I or O alpha display only 65 9999 Elapsed minutes set Mode 37 6 2 or 3 66 9999 Elapsed seconds set Mode 37 6 2 or 3 67 xssx gt nnnF gt nnnC Seconds for used with alternating time temp displays See also Modes 37 41 37 42 37 43
212. ode 37 46 Alarm Set Time Hours Minutes This mode is used to set the alarm hour and minutes There are 99 possible settings Mode 28 optionally sets the seconds Mode 29 determines the day s to activate the alarm s A day code must be set to enable alarm Mode 32 23 enables default or disables the alarms Mode 38 contains alarm schedule assignments Mode 37 1 determines which schedule is active Mode 32 16 activates alarms in slave clocks Mode 49 enables alarm toggle on off This overrides momentary alarm activation Mode 37 2 1 enables snooze function to turn off alarm before the predefined alarm duration has expired See Mode 34 to activate the alarm at sunrise and or sunset See Mode 49 to use the real time alarm settings to control timer functions See also Modes 28 29 and 59 In Tiger version 3 75 and later the number of alarm entries has expanded from 100 to 1000 The 1000 alarm entries are stored in 10 different schedules of 100 entries each When Mode 37 1 0 alarm schedules will automatically change depending on the active date range There are 20 date ranges available The Mode 38 function has changed It now determines which schedule is active for date ranges defined in Modes 53 54 55 and 56 Setting Mode 32 4 4 allows the Timer control button to switch between schedules 0 10 0 activates date range switching Press Timer Control to access Mode 37 1 Use the Up and Down buttons to change the schedule from 0 10 then press Ti
213. ode 43 1 2 2 enable using internal transistor array also set 43 1 1 This value also enables four channel relay output If the four channel relay option is installed then the clock expects at least one alarm setting for relays 2 3 or 4 If relays 2 3 or 4 are not included in any alarm scheduled at this time then set Mode 59 99 16 This will cause the relays to correctly initialize at power up When Mode 32 26 1 then set Mode 37 12 0 Display Driver Selection 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BR o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions Factory Use Only display driver type used for numeric displays 0 TB62709 default 1 TB62706 Leading Zero Blanking on Selected Display Modes O disabled 1 enabled default The effected display modes include 4 5 6 7 17 19 21 22 23 30 37 52 55 and some menu functions This mode also controls the leading zero blanking for the special characters of digital alpha lettering See also mode 20 31 Reset and Initialize Display Drivers This mode periodically resets and initializes numeric display drivers including alpha digits on the numeric buss The alpha drivers are not affected O disabled 1 fast but only if 4 physical zones or more 2 fast display reset reboot daily 3 reset displays once per min reboot daily 4 default
214. ode 55 equals 2000 then the alarm will activate every year with the month day range specified The ending date must be occur after the beginning date See also Mode 38 to force an alarm schedule active Alarm group 1 is different than the other 19 alarm groups If no date range is active then group is the default This feature reduces the number of alarm entries required in some schedule situations Mode 27 set the hours and minutes Mode 29 sets the day of the week required Accelerated advance for changing values i e Start End count 1 default Four Channel Alarm Relay Configuration If the four channel relay option is installed then the clock expects at least one alarm setting for relays 2 3 or 4 If relays 2 3 or 4 are not included in any alarm scheduled at this time then set Mode 59 99 16 This will cause the relays to correctly initialize at power up Value 1 default 15 Set Mode 32 26 2 and 43 1 4 to activate the four channel relay output Mode 59 position 1 99 corresponds to alarm positions 1 99 To set or reset a relay at a specific time enter one of the following values or combinations of values in the position that corresponds to the alarm position Value of 1 relay 1 Value of 2 relay 2 Value of 4 relay 3 Value of 8 relay 4 Binary combinations are allowed For example use a value of 12 4 8 to turn on relays 3 and 4 You cannot turn on one relay and turn off another relay at the same time When using timed ala
215. om 125 800 295 0220 ABRG TCP IP Configuration Main Page IP v4 Settings Enable DHCP IP v4 Address Subnet Mask Default Gateway Primary DNS Secondary DNS IP v6 Settings l Enable DHCP v6 F Use the following static IP v6 address IP v6 Address Prefix Length Lech Enable DHCP check to enable automatic IP address configuration using DHCP Uncheck to use manual address configuration The address fields will be grayed out when checked IP v4 Address enter the IP address using version 4 protocol Subnet Mask enter the subnet mask Default Gateway enter the gateway IP address Primary DNS Domain Naming Service address required if one or more alphabetic named SNTP servers will be used Not required if all SNTP server addresses are numeric Secondary DNS Domain Naming Service address optional The factory default addressing mode is DHCP If your network has a DHCP server simply connect the clock to your network and the clock will acquire a leased IP address The lease acquisition can be almost immediate or may take several minutes You can use the Clock Control program to determine the leased IP address by going to Setup Clock IP Discovery You may not see your clock listed in the discovery panel until it has acquired a lease You cannot access the Ethernet interface until it s acquired an IP address Once the clock has acquired an IP address you then select the clock from t
216. ome clocks are out of phase they will operate but will display one minute off from the time displayed on the master clock To be sure the clocks are in phase run the red wire from the master clock to the same terminal on all analog clocks Likewise run the black wire from the master clock to the same remaining terminal on the analog clocks Once the system is operational if the analog clocks are out of phase by one minute swap the red and black wires at the master clock This will place all analog clocks in the correct phase If a single clock needs to be removed for any reason unplug the connector plug from the analog clock s pins The master clock may remain powered To return an analog clock to operation plug the connector back onto the analog clock s pins Then turn the dials to the correct time using the thumbwheel on the back of the clock If the clock is one minute off after the next minute pulse then reverse the connector on the pins Operation 1 Be sure analog clocks all display the same time They are typically shipped with the hands pointing to 12 00 The master clock s secondary time display is also pre configured to 12 00 Change the time of any analog clocks as necessary using the adjustment provided behind the clock Connect the red and black sync wires from the master clock to all analog clocks 3 Apply power to the master clock The clock will not begin sending synchronization pulses to the analog clocks until the
217. ople for Auto People Times Salary Counter 1 default Used with thumb wheel switch See also Modes 37 26 45 6 and 45 7 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions Analog Master Clock Bi polar Sync Method O disable default 1 enabled but paused 2 enabled and running The Analog Master Clock mode allows the clock to send correction pulses to analog slave clocks The AM analog slave clock option is required to implement this mode Setting mode 37 28 1 will enable the analog master clock option but sync pulses will not be sent The master clock will not begin sending pulses to the slave clocks until the master clock is given the go ahead to do so To start the master clock sending pulses to the analog clocks first press the Timer Control button The master clock will display the current analog clock time Use the Up and Down buttons to change the displayed time to match the analog clocks Then press the Timer Control button a second time to return the master clock to normal time display If the master clock s hours do not equal the analog clock s hours or the master clock s minutes are greater than the analog clock s minutes then the master clock will begin sending correction pulses to the slave clocks at the top of the minute and eve
218. or 0800828 to send 35 byte commands and time packets out the SR ST port Set Modes 32 12 2 and 45 9 gt 600 8 Configure capcode for 0800828 to send 35 byte commands and time packets out the GPS port Set Modes 32 12 2 and 45 9 gt 600 Switching Analog Clocks between Daylight Saving and Standard Time Tiger Version W4 78 and older If Chouchin and Shengbang movements are used in the same system then install hands on both movements in the 10 00 position set Mode 37 62 9 and Mode 37 76 1 When switching between daylight saving and standard time the change will occur when the clock hands are at 2 04 Tiger Version W4 79 and later If Chouchin and Shengbang movements are combined in the same system or by themselves install hands on both movements in the 12 00 position set Mode 37 62 7 and Mode 37 76 0 When switching between daylight saving and standard time the master transmitter will not broadcast time from 8 00 pm to 1 00am the following day on the day to switch between daylight saving and standard time The clock will begin changing to the new time when the clock hands are at 2 04 In addition to Mode 24 1 14 Modes 45 20 and Mode 45 21 must be set to the correct DST rule FALL When the clock is reset the hands are set to 12 00 at the factory 10 00 for Chouchin movements 1 The second following 01 59 59 local daylight saving time the master clock will change to 01 00 00 local standard time 600 N River Street D
219. ount 99999999 to 99999999 Warning Alarm Time Mode 43 2 43 3 AACCSSMMHHXXXXXXXXXXXXXXXXXXXXXX CC 59 SS second MM minute HH hour Timer Control Operating Mode Mode 32 4 AACCNXXXXXXXXXXXXXXXXXXXXXXXXXXX CC 65 N 1 3 timer control operating mode Timer Control Timer Direction Mode 32 5 0 I AACCNXXXXXXXXXXXXXXXXXXXXXXXXXXX CC 66 N 0 up timer Timer Control Timer Direction Mode 32 5 1 AACCNXXXXXXXXXXXXXXXXXKXXXKXXKXXXXF CC 66 N 1 down timer Timer Control Switch Mode Mode 32 6 AACCNXXXXXXXXXXXXXXXXXXXXXXXXXXX CC 67 N 1 3 timer control switch mode 600 N River Street e Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com 149 mm 800 295 0220 Timer to Real Time Delay Mode 32 7 I AACCNNXXXXXXXXXXXXXXXXXXXXXXXXXX CC 68 N 0 99 Delay in minutes O disabled Timer Starting Time Ending Time Warning Time and Timer Reset Modes 7 8 42 3 42 4 AACCSSmmHHSSmmHHSSmmHHxxxxxxxxxx CC 69 SS Starting second MM Starting minute HH Starting hour SS ending second MM ending minute HH ending hour SS warning second MM warning minute HH warning hour Sunrise Sunset Lat Long Modes 32 35 32 36 61 62 63 64 AACCNNBBBDDELLLOOMVYYxXxxXxXXXXXXXX CC 70 N Display zone number B Latitude degrees D Latitude minutes Latitude direction O North 1 South Longitude degrees
220. per second the alarm will turn on and off six times throughout the three second alarm duration period A value of 99 will activate the timer control line at the alarm time setting This feature is used to automatically switch from real time to timer operation at the specified time See also Mode 32 13 for alarm pulsing all alarm settings Elapsed days and hours Starting value While in timer mode the number of days are counted The day counter is incremented every 24 hours elapsed time or at midnight as determined by mode 37 6 Elapsed days may be displayed using Mode 20 21 For down timers use a negative day value For up timers use a positive day value Elapsed hours may be displayed using Mode 20 22 Position elapsed days Starting value 9999 to 9999 days and position 2 elapsed hours Starting value 9999 to 9999 hours Pressing the Down reset button resets the day or hour counter to the value set in Mode 35 0 default See also Mode 37 48 and Mode 51 See also Mode 37 49 for displaying days and hours on an alpha display Direction reverse in medium duration timers requires version 4 50 or later Timer Control Display Format When the code blue line is enabled the display format will optionally change to the value specified in Mode 36 for each respective display position If the mode value is zero the default display mode will be used See Mode 20 for a list of available display modes See also Mode 26 7 and 26 8 to displ
221. places a Product the warranty continues for the remaining portion of the Coverage Period without extension All replaced Products and all parts removed from repaired Products become the property of BRG Precision Products Inc BRG Precision Products Inc covers both parts and labor necessary to repair the Product and return shipment to the Customer via a BRG Precision Products Inc selected non expedited surface freight within the contiguous United States and Canada Alaska and Hawaii return shipments to the Customer are via non expedited air freight 4 What Is Not Covered This Agreement does not cover costs related to the removal installation or field troubleshooting of the Product under the terms of the Agreement if and not limited to a the Product has been misused neglected improperly installed physically damaged or altered either internally or externally or damaged from improper use or use in an unsuitable environment b the Product has been subjected to fire splashed water unless specifically ordered to be water resistant submersion into any liquid generalized corrosion biological infestations or high input voltage including lighting strikes and generators operating outside the limits of their Product specifications c repairs have been done to it other than by BRG Precision Products Inc or its authorized service centers or as assigned by BRG Precision Products d the Product is used as a component part of a Product expre
222. ple Send a 100 ms pulse at 3 00 am over radio sync using the alarm relay Mode 6 1 Mode 16 3 00 Mode 17 00 Mode 32 33 1 Mode 37 3 1 Mode 45 8 100 Serial Sync Output Delay Duration between serial sync output transmissions in tenths of seconds A value of minus 1 default causes the sync data to be transmitted once per second Ver 4 51 A value of minus 2 default causes the sync data to be transmitted once per minute A value of 3 causes the sync data to be transmitted once per hour A value of 4 causes the sync data to be transmitted twice daily at 2 and 3 am In timer and counter modes sync data is sent full speed or about 5 10 times per second See also Mode 32 12 NTP Update Interval in Minutes 1 default Stores the frequency of clock updates using NTP Select mode 70 2 to send the stored value to the Ethernet interface See also Modes 45 11 45 12 70 and 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 100 dB o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions 71 Ethernet Configuration Port The least significant four digits of the port address is displayed 10 000 will be added to the stored valued The default stored value is 6437 therefore the port address is 16437 Select mode 70 3 to send the stored value to the Ethernet interface See also Modes 45 10 45 12 70
223. port for time transmissions Mode 37 78 5 configure for 5 transmit channels If necessary set Mode 33 for the respective zone to force half hour time offsets Forced Wireless Relay Selection O both relays 1 relay 1 default 2 relay 2 3 relay selected from alarm schedule This mode forces which relay 1 2 or both to use in a wireless relay module A value of 3 reverts back to obtaining the relay number from the alarm schedule The forced mode should be used when using the countdown mode of wireless digital clocks along with wireless relays See also Mode 37 61 Wireless Device Test Mode O disabled 1 default enable wireless test mode using the Timer Control button Pressing the Timer Control button once displays the current test mode setting Press the Timer Control button again to send the test message or use the Up or Down buttons to change to another mode then press the timer control button to send the message 1 Send real time to message board 2 Blank message board 3 Unblank message board 4 Sent time format to message board 5 Send This is only a test to board 6 Activate speaker amp and lights 7 Enable message 16 8 Erase all messages 9 Beep message board 10 Reset message board Mode 11 determines the upper three digits of the capcode example 080 of 0800828 default 0080 Mode 12 determines the lower four digits of the capcode example 0828 of 0800828 default 0828 This test mode is not available for 90
224. port if the address received equals zero or the address received equals the address set in mode 32 42 default Tiger version 4 06 or later Increase the inter packet delay in the Windows control program when sending to a wireless master clock To send decoded data out the GPS port and raw data out the SR ST port set 32 44 1 remove pin 2 from the RS422 chip on the SR ST port and jumper SR ST Switch to Real Time Display Format This mode determines which display format to use when switching from timer to real time display Available in version 3 59 or later If 0 the all displays modes will be restored If greater than 0 then the value supplied will be used in zone one and zones 2 and 3 will be blank Ethernet Interface Hardware Reset on Power up A reset is no longer required with Ethernet version 5 8 or later This mode was removed in Tiger version 3 45 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions O disabled 1 enabled using port L35 default Mode 32 60 must equal 0 to use the port reset feature 3 11 Repeat Clock Control Commands Control commands coming in the SR ST port are repeated out the ST port GPS port or both 0 disabled default 1 SR ST port 2 GPS port 3 both Ethernet Control Port 0 SR ST port default 1
225. r Wireless Analog Clock Transmit Time Offset This parameter controls the wireless analog clock hour offset from local time Shengbang movements Set Mode 37 62 7 Chouchin movements Set Mode 37 62 9 This parameter disables analog clock time transmissions between 22 00 and 2 00 if Mode 37 74 is also less than 4 This action causes the Chouchin movement to receive and use the complete time transmission at 02 00 40 This allows prompt switching between Daylight Saving and Standard time The hour hand on the Chouchin 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com RT EE First Menu Level Mode Number Second Menu Level Mode Description and Instructions movement s hour hand must be set to 10 00 at the factory and Mode 37 62 set to 9 The DST rule in Mode 45 20 and Mode 45 21 is used to calculate the DST date Chouchin Movements require Tiger Version W4 75 or later Tiger Version W4 78 and older If Chouchin and Shengbang movements are used in the same system then install hands on both movements in the 10 00 position set Mode 37 62 9 and Mode 37 76 1 When switching between daylight saving and standard time the change will occur when the clock hands are at 2 04 Tiger Version W4 79 and later If Chouchin and Shengbang movements are combined in the same system or by themselves install hands on both movements in the 12 00 position set Mode 37
226. r See also Mode 45 22 to define new daylight saving rule Mode 45 22 must be set to 0 to enable this mode otherwise use Mode 45 22 to enable rule base switching Custom Julian Standard Time Switch User Defined 11 Enter the day of the year to switch from daylight time to standard time This value is used by Mode 24 code 11 Both modes 52 3 and 52 4 must be set to the desired day of the year See also Mode 45 23 to define new daylight saving rule Mode 45 23 must be set to 0 to enable this mode otherwise use Mode 45 23 to enable rule base switching Custom Julian Daylight Time Switch User Defined 20 Enter the day of the year to switch from standard time to daylight time This value is used by Mode 24 code 20 Both modes 52 5 and 52 6 must be set to the desired day of the year See also Mode 45 30 to define new daylight saving rule Mode 45 30 must be set to 0 to enable this mode otherwise use Mode 45 30 to enable rule base switching Custom Julian Standard Time Switch User Defined 20 Enter the day of the year to switch from daylight time to standard time This value is used by Mode 24 code 20 Both modes 52 5 and 52 6 must be set to the desired day of the year See also Mode 45 31 to define new daylight saving rule Mode 45 31 must be set to 0 to enable this mode otherwise use Mode 45 31 to enable rule base switching Custom Julian Daylight Time Switch User Defined 21 Enter the day of the year to switch from standard time
227. r Auto Reset at Ending Value 0 default disabled 1 When the Ending value is reached the counter will be reset back to the starting value 2 When the Ending value is reached the counter will be reset back to the starting value plus one count PM Indicator O disabled 1 enabled default This applies to most display modes where hours and minutes are displayed Production Counter Goal Set 0 disabled default 1 While in counter mode the up and down buttons run the count forward or 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com nae SC First Menu Level Mode Number Second Menu Level Display format number 1 24 Mode Description and Instructions backward This is used to set a Goal value in an Actual Goal production display Timer Start Stop Reset Single Line Control 0 disabled default 1 Pressing the Start button when the timer is stopped starts the timer Pressing the Start button again pauses the timer Pressing the Start button once more resets the timer and starts it running again See also Mode 37 9 Time Zone Digital Lettering Manual Frame Change 0 disabled default 1 code blue button will increment through pre configured time zones 2 24 frame to start with on power up This mode is used with alpha zone lettering See also Mode 32 3 and Mode 51 When 37 20 1 automatic zone switching is disabled
228. r is connected to a single display and a time zone offset from UTC is used then the mode 32 19 value must equal 1 default 1 Power Line Communications 0 disabled default 1 transmit 2 repeater 3 slave 4 transmit every ten minutes when the minutes end in 0 5 receive and transmit every ten minutes when the minutes ends in 5 6 transmit daily at 04 00 7 receive and transmit daily at 05 00 Set Mode 32 12 1 to enable power line sync transmit modes When transmit enabled 1 the clock will send the time over the power line every ten seconds when the seconds ends in 0 When the repeater is enabled 2 the clock will receive time transmissions and will transmit every ten seconds when the seconds ends in S The repeater mode is used to extend the power line sync range When receive is enabled the clock only receives time transmissions Mode 32 34 Serial Communications Checksum is automatically enabled anytime Power Line Sync is enable Sync Receive Override 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions O disable default 1 Allow time from RS422 sync wire or GPS or CDMA to update real time clock while in timer or counter mode Only the seconds are updated in counter mode This increases the accuracy of the elapsed t
229. r repeater There can be no more than one transmitter and one repeater within a single broadcast area Available Models Two power line communication models are available PL is for common single phase power lines and PL3 is for industrial three phase power lines The three phase model is only used on the master clock The PL single phase model is used in most installations including most three phase installations Valid power options include P2 110 volts AC P3 220 volts AC P5 100 240 volts AC P8 110 volts AC with 12 power cord and P9 110 volts AC with flat plug The power line communications signal will not pass through power distribution transformers The master clock may optionally include a GPS or CDMA time receiver for the correct time all the time If no time receiver is used the master clock can be manually set For special applications other options may also be used with power line communications including serial wire sync IRIG B SMPTE midnight reset pulse sync and more 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 122 800 295 0220 Ethernet Communications Option Overview Once the clock is connected to the network and power is applied DHCP is used to automatically assign each clock an IP address on the network The clock will then search the Internet or local area network for NTP time servers NTP Network Time Protocol
230. receivers and a timer value of 1 9 minutes Other receivers may be selected in special configurations If a wireless relay will be used in conjunction with the countdown timer to activate a tone or bell select the desired switching pattern from the drop down box titled Wireless Relay Switch Pattern Both relays in the wireless relay module will be activated during the wireless relay transmission EXAMPLES Wireless Master clock configuration processor version 4 29 or later Mode 27 1 13 00 alarm set to activate at 1 00 pm alarm position 1 Mode 29 1 8 alarm set to activate everyday alarm position 1 Mode 30 1 5 5 minute countdown in alarm position 1 Mode 34 1 23 clock wireless relay for 3 seconds alarm position 1 Mode 37 56 2 send alarms out the wireless port Mode 37 61 1 enable secondary clock countdown timers Tiger processor four digit secondary clock configuration example Mode 9 0 00 Set preset time to 0 00 Mode 37 61 2 Enable alarm count down operation clock receiver address 2 Mode 32 4 1 resume real time when end is reached Mode 32 5 1 set timer to down direction Mode 36 1 12 set timer display format to minutes and seconds Mega processor four digit secondary clock configuration example Mode 9 0 to disable countdown timer Mode 9 1 9 countdown timer address Requires BRG1751v3 or later UHF decoder receiver See also Mode 37 79 processor W4 89 or late
231. reet Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com RT 7g Nt First Menu Level Mode Number Second Menu Level Mode Description and Instructions 0 59 57 default Second of the minute to send time to paging transmitter For receiver BRG1751v5 0 either 47 or 57 may be used for analog clocks When 47 is used signals received other than 47 seconds after the minute and transmissions from competing brands on the same frequency and address are ignored Wireless Clock Types 0 Disable analog and digital clock time transmissions version 5 53 or later Values of 5 8 may be used for older firmware versions to disable time transmissions to analog and digital clocks This is useful when only message display time transmissions are required previous command meaning Send time to only analog clocks 1 transmitter only 1 Send time to analog clocks digital clocks default 2 Analog clocks only on even minutes for 2 transmitters 3 Analog clocks only on odd minutes for 2 transmitters 4 Digital clocks only for 2 10 transmitters If Mode 37 53 0 then transmission will occur every minute If Mode 37 53 gt 0 then the transmission will occur only when the minute ends in the same value 5 Configure capcode for 0800828 to send 35 byte commands out the SR ST port 6 Configure capcode for 0800828 to send 35 byte commands out the GPS port 7 Configure capcode f
232. rement e the count down will move faster Menu Mode Increment the menu address or menu item value Press once to access menu system Press Up or Down to S move to desired menu item F Real Time Mode Decrement r ETTE the time Holding the button Press mode again to displa vi Wide LS e g g SE Digital Time Diopisy down will move faster Menu menu value Press Up or Down e D 800 295 0220 316 788 2000 Mode 7 Decrement the menu to change value Press mode EE E to exit menu item Press Down 4 ue until zero will exit the menu system Actual Size 600 N River Street Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com Biss 800 295 0220 12 i Long Duration Timer Infrared Remote Control The infrared remote control is standard with time zone displays and optional on other models It can be used to control real time displays timers and counters The remote can also be used to access and change the clock s configuration The remote control receiver must be factory installed Target Month Day Year Press once to access month day Press Up or Down to change Press again to access year K Press Up or Down to change Press again to exit Real Time Press to display real time Press Up or Down to gank change Press again to return to timer mode Menu Press to accessthe menu system Call for assistance before accessi
233. rewre Power Line yrwWwie Power Line Drive up l to 200 clocks The Master Clock sends the Slave Clocks receive time synchronization data hourly over the sync wires The sync time to the slave clocks over wires may be 5 000 feet or more Any number of wiring schemes may be used sync wires The master clock including parallel star network or any combination Sync wire may be ordinary may optionally include a GPS or 14 16 gauge bell wire The sync system is resistant to radio or other magnetic CDMA time receiver interference Low Voltage Clocks E Master Slave Slave Slave Optional GPS or CDMA Time Receiver SrcWre SyrcWie yrWie Drive up SCH GG clocks d The Master Clock sends the Slave Clocks receive time synchronization data hourly over the sync wires The sync time to the slave clocks over wires may be 5 000 feet or more Any number of wiring schemes may be used sync wires The master clock including parallel star network or any combination Sync wire may be ordinary may optionally include a GPS or 14 16 gauge bell wire The sync system is resistant to radio or other magnetic CDMA time receiver interference 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 133 800 295 0220 Serial Wire Synchronization The RS 422 protocol used for wire sync communications greatly expands the practical possibilities of the serial bus It provides a mechanism by which serial da
234. rm output form 1 50 seconds do not schedule any other alarm times during the period any alarm is active Because relays 2 3 and 4 use the signal light outputs these relays cannot be used with signal lights temperature sensor and Sync Input Relay Channels 1 L67 2 L37 3 L63 4 L36 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 115 iin eee N First Menu Level Mode Number Second Menu Level Mode Description and Instructions SYSVARN System Information Register The second parameter is passed to the SYSVARN function The value returned by SYSVARN is displayed RE_CNT RE_SEMA RE_IDRES CALL_LEVEL lt 16 gt DSTACK_FILL lt 17 gt DSTACK_FREE lt 18 gt DSTACK_SIZE lt 19 gt DRAM lt 30 gt 0 SRAM lt 31 gt 0 FLASH_CHIPS lt 32 gt FLASH SZ lt 33 gt FLASH SEC lt 34 gt FLASH_SSIZE lt 35 gt FLASH_ASEC lt 36 gt FLASH_GSIZE lt 37 gt FLASH_DSEC lt 38 gt FLASH_DSIZE lt 39 gt FLASH_DMODE lt 01 gt lt 02 gt lt 15 gt Taskname Runtime error counter level Taskname Taskname Current error flag O ok 1 error Resets error flag and returns error code Taskname Stack nesting level Taskname Stack filling in bytes Taskname Free stack space in bytes Dummy Stack size in bytes Total DRAM in System Total SRAM in System Dummy Number of Flash Chips Dummy Size of Flash Chips in bytes Dummy Number of sectors per chip
235. ructions Mode 32 33 1 Mode 37 3 1 Mode 45 8 100 Serial Communications Checksum 0 disabled default 1 enabled for real time and timer modes but unavailable for counter mode This function improves the reliability when sending and receiving time updates over serial wire sync and power line sync It may be disabled for compatibility with older clocks This mode is automatically enabled when power line sync mode 32 20 is enabled Sunrise Sunset Indication 0 disabled default l use display intensity to indicate nighttime 2 use decimal point to indicate daytime See also Modes 32 36 61 62 63 64 and Display Modes 56 57 58 and 59 Display Intensity to Indicate Nighttime for each respective time zone Default intensity is 7 See also Modes 32 35 61 62 63 64 and Display Modes 56 57 58 and 59 Return to Real Time from Timer Mode 0 disabled default 1 Pressing the timer control while the timer is stopped or paused will return the display to real time See also Mode 32 45 Number of Seconds to add to PL Sync Received The time received over power line sync is adjusted by the specified number of seconds to account for propagation delay default 2 Display Absolute Value 0 disabled default 1 enabled Display the absolute value of various four digit counter and timer display modes This effectively removes the negative sign when the value is less than zero Ethernet Interface NTP Time Correction 0 disabled def
236. ry four seconds thereafter until the slave clocks match the master clock If the master clock s hours equal the analog clock s hours and the maser clock s minutes are less than the analog clock s minutes then the master clock will pause pulses to the analog clock until the master clock equals the analog clock The AM option also includes the alarm output relay For the 59 minute sync method see Mode 37 3 Control Button Lockout and Addressable Clock Function 0 Disabled default 1 Disable the Mode button x minutes after the last button press Up and Down button work normally See also Mode 32 55 2 Disable the Mode Up and Down buttons x minutes after the last button press Mode 32 49 determines the delay period To enable the buttons press and hold the Mode button until four one s or four two s appear about 5 seconds then release the mode button Pressing the Up and Down buttons simultaneously will also enable the buttons 3 Disable the Mode Up and Down buttons x minutes after the last button press Mode 32 49 determines the delay period Pressing the Up and Down buttons together will not enable the buttons To enable the buttons press and hold the Mode button until four one s or four two s appear about 5 seconds then release the mode button 4 Addressable Clock Function with Inactive Up and Down buttons This mode disables access to the clock until the clock s address is displayed To display the clock s addre
237. s brgproducts com www brgprecision com dB o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions T receive counter pulses from port L35 Do not use when SR ST serial sync IC and 7400 IC is installed Set Modes 32 46 0 and 32 60 0 8 send counter pulses from increment up button out port L35 Do not use when SR ST serial sync IC and 7400 IC is installed Set Modes 32 46 0 and 32 60 0 9 enable 59th minute sync output using the channel 1 alarm output relay 10 enable 59th minute sync output using the channel 2 alarm output relay Set Mode 32 26 2 and 43 1 1 to activate the four channel relay output 11 enable 59th minute sync output using the channel 3 alarm output relay Set Mode 32 26 2 and 43 1 1 to activate the four channel relay output 12 enable 59th minute sync output using the channel 4 alarm output relay Set Mode 32 26 2 and 43 1 1 to activate the four channel relay output Sending 59 Minute Sync Impulse The clock must have the relay output option installed AL A pulse will be output hourly at xx 57 54 for 8 seconds except for 05 57 54 and 17 57 54 for 14 seconds If a four channel alarm relay is installed Mode 32 26 must be set to 2 to enable the four channel relay Any one of the four alarm channels may be used for 59 minute sync output by selecting Mode 37 3 9 through 37 3 12 Digital clocks receiving the 59 minute sync protocol must be within 6 hours of the corre
238. s located on the back of the clock Simply drive the appropriate number of screws into the wall and hang the clock on the screws Secure eyelet attachments are also available where a more secure mount is required The standard U S power configuration consists of a wall mount AC adapter This adapter drops the voltage down to a Class 2 voltage The power wire may be cut extended and or and rerouted through walls as pictured below Power configurations for other countries may vary Mounting Methods Sawtooth Hanger AC Power a en Wall Wall Conduit Clock Clock Clock Single gang box Low Voltage Power Wire Wall Secure mount eyelets are available upon request AC Power Module Secure Eyelet hangers are available Q Back View Side Eyelet hangers may be used for securing View to flat surface Le 600 N River Street e Derby Kansas 67037 e 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com na EEN Operation The BRG Digital Clock Calendar Timer Counter uses an L E D display for reliable operation The clock is protected against power failures with a 10 year Lithium battery During the absence of power the display is blanked to conserve the battery All operating parameters are stored in non volatile memory The internal clock continues to operate from battery backup When the A C pow
239. s of seconds seconds default minutes or hours See also mode 37 13 Counter Increment Button Debounce 5 default This parameter is used to introduce a short delay after a button press has been detected before accepting further input This delay is used to eliminate false input due to button contact bounce The increment line may be paused for 0 9999 milliseconds This parameter is also used to control the scroll speed of alpha digital lettering See also Mode 51 Counter Increment Amount default 1 The counter will increase or decrease by this amount each time the counter is incremented or decremented Sync Receive Time Zone Offset 12 to 12 0 default time zone offset for wire sync receive to convert incoming local time from a computer to Zulu time Use the same time zone offset that the computer uses For example if the computer is set to central time or the CDMA receiver is receiving central time 6 then set this mode to 6 to cancel the local time zone offset Set Mode 32 8 2 to enable this mode Also set Mode 24 24 to the local daylight saving time rule The default is U S daylight saving time Hours Worked Per Year 2080 default used with 37 26 23 thumb wheel switch See also Mode 37 14 4 Salary default Auto count salary See also modes 37 26 37 27 and 45 6 See also Mode 37 Midnight Sync Output Duration Override milliseconds midnight sync output duration override in milliseconds Exam
240. s the Starting hours and minutes Mode 28 3 sets the Starting seconds If the Reset line is closed to ground Mode 27 4 set the Starting hours and minutes Mode 28 4 sets the Starting seconds 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BR o FNO o First Menu Level Mode Number Second Menu Level Display format number 0 2 Mode Description and Instructions 9 Medium Timer Reset Days Hours and Minutes The Change Start button is used to set the timer reset days The Change End button is used to change the timer reset hours and minutes When changing the medium duration timer Reset times press the Start or End button once to change the days hours and minutes Press the same button again to return the display to the previous display mode Use with display modes 2 3 21 50 55 and 60 10 Medium Timer Reset Hours The Change Start button is used to set the timer reset hours The Change End button is used to change the timer reset minutes When changing the medium duration timer Reset times press the Change Start button once to change the hours Press the same button again to return the display to the previous display mode Use with display modes 22 27 65 and 66 11 Multiple Reset Values Pressing the Change Start button will display the current predefined timer reset value The Up and Down buttons may be used to move up and down throug
241. scanscanscanscanscanscanscanscanscanscanscanecanscanscsnscsnsesnsessses 29 COUNTER CONFIGURATION EXAMPLES csscsssssssoscsssssssssssnscsssssssnscancsnscsnccascsscsnsesscsussasesuccascsscenseasceasensesss 30 59 MINUTE ANALOG MASTER CLOCK OPERATION ccsssssssssssssssssscesssccessncsecsucsecsncsessucescsnccecsuceecsncesess 31 BI POLAR ANALOG MASTER CLOCK OPERATION ssssssssssssssssssnsssssssssnscssssasssscsnsenscsussnscsnceacesceasceuseaseses 33 ALARM CONFIGURATION sisciencacunemiiannaiasaeanousaimd aatiuanaaeinn ae 36 ALARM CONFIGURATION WORKSHEET ssscssssssssssssssssssssnscassssssnscsnscsscsnsenscsusenscsuceasesscsnsensceusensesncensesses 37 INFRARED REMOTE CONTROL eege 38 LONG DURATION TIMER INFRARED REMOTE CONTROL sssssssssssssssssssssssssscsnscnscssssnscsnseasssscencenscensesss 39 KEYPAD PARAMETER ON URY saciccscrsricancanicnccaieisecnatennaiorsd unweit 40 TIGER PROCESSOR CONFIGURATION MENU seenen 42 TIME SYNCHRONIZATION METHOD COMPARISON CHART sccsssssssssssssssssssssnscsnssasssscsncenscenscsncessesees 120 ADVANTAGES eegene 120 POWER LINE COMMUNICATIONS dee 122 ETHERNET COMMUNICATIONS OPTION scssssssssssssssssssnssosisaseonssbsvsvessssnussseasvensaseuseabsnsesistvcastannvenssosasvsesdpanda 123 POWER OVER ETHERNET OPTION DOE 129 DIGITAL RADIO SYNCHRONIZATION sisicissccsssascisnscoswnnsicrinnn nana naneaicndanncismommunauann 130 DIGITAL RADIO SYNCHRONIZATION CONTINUED ssssssssssssssoscsscsssssscssscsssensess
242. serial communications See display modes 21 and 22 See also Mode 32 18 37 34 37 35 and 37 36 First Alternating Display Duration First in Sequence to Display This delay value allows easier viewing when alternating display modes are used For example when alternating between time and date the time could display for 5 seconds while the date only displays for 2 seconds This reduces confusion when numbered displays are alternating back and forth Mode 37 13 acts as a multiplier for Modes 37 41 37 42 and 37 43 For example if 37 13 10 then setting Mode 37 41 99 would cause a 99 second delay Second Alternating Display Duration Second in Sequence to Display This delay value allows easier viewing when alternating display modes are used For example when alternating between time and date the time could display for 5 seconds while the date only displays for 2 seconds This reduces confusion when numbered displays are alternating back and forth 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO o First Menu Level Mode Number Second Menu Level 0 99 tenths of a second Mode Description and Instructions Mode 37 13 acts as a multiplier for Modes 37 41 37 42 and 37 43 For example if 37 13 10 then setting Mode 37 41 99 would cause a 99 second delay Third Alternating Display Duration Third in Sequence to Display This delay
243. special characters See also 32 54 to determine the type of displays installed 16 segment or 5X7 matrix See also Mode 45 25 to configure a protected area for special characters Special Characters The following macro characters are available for special display applications Value Description 1 Julian date or day of the year Hundreds see also 2 and 31 2 Julian date or day of the year Tens see also 1 and 31 3 Time hours ten 4 Time hours unit 5 Time Minute ten 6 Time Minute unit 7 Time Second ten 8 Time Second unit 9 Day of the Week alpha character one 10 Day of the Week alpha character two 11 Day of the Week alpha character three 12 Month alpha character one 13 Month alpha character two 14 Month alpha character three 15 Month ten 16 Month unit 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 109 no NEE First Menu Level Mode Number Second Menu Level Mode Description and Instructions 17 Day ten 18 Day unit 19 Year thousand 20 Year hundred 21 Year ten 22 Year unit 23 P or A AM PM indicator 24 Military Shipping Code A Z no I or O 25 Temp F hundred 26 Temp F ten 27 Temp F unit 28 Temp C hundred
244. splay will flicker Continue holding down the Mode button until the clock s address appears then release the mode button to access that clock s menu system See also Mode 37 29 32 49 32 55 and 32 59 Ethernet Interface Flash Memory Auto Save O disabled 1 enabled default This parameter disables or enables the automatic memory save when an Ethernet command is issued Mode 71 commands Moving Message Command Repeater 0 Moving Message commands are ignored 1 The moving message data without header address and footer is sent out the GPS port Data received on the SR ST port will only be sent out the GPS port if the address received equals zero or the address received equals the address set in mode 32 42 default Tiger version 4 06 or later Increase the inter packet delay in the Windows control program when sending to a wireless master clock 2 The complete 35 byte moving message string received on the SR ST port is repeated out the GPS port 3 The moving message data received on the SR ST port is sent out the SR ST port The data will only be sent out the SR ST port if the address received equals zero or the address received equals the address set in mode 32 42 4 The complete 35 byte moving message string received on the SR ST port is repeated out the SR ST port 5 The moving message data without header address and footer is sent out the SR ST port Data received on the SR ST port will only be sent out the SR ST
245. ss hold the mode button down until the display stops flickering and a number appears This is the clock s address If the mode button is released while the clocks address is displayed then access to the menu system will be granted Once the buttons are enabled a one will appear and the clock will display the first menu address position Press down to return to the normal display or use the Up button to move to the desired menu item After exiting the menu system the access will be denied after a delayed period determined by Mode 32 49 Mode 32 42 is used to set the clock s address See also Mode 32 55 5 Addressable Clock Function with Active Up and Down buttons when the clock as actively selected This mode is the same as Mode 37 29 4 except the Up and Down buttons remain active For example a display could have three displays Two of the 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BR o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions displays could show real time while the third displays may be a timer that requires active Up and Down buttons The remote could be used to access any of the displays In this scenario if one of the real time displays is accessed you may see activity on the timer because the Up and Down buttons would be active on both the real time display and the timer See als
246. ssly warranted by another manufacturer e the Product s original identification trade mark serial number markings have been defaced altered or removed f the Product is located outside of the United States and Canada g the customer has misrepresented the Product information provided to BRG Precision Products Inc in order to receive coverage under the terms of this Agreement This Agreement does not warrant uninterrupted or error free operation of the Product h Product malfunction or damage resulting from electromagnetic or solar radiation i Shipping charges to the factory more than 30 days after first receiving the product j Undesirable operation resulting from changes to public law after the product was purchased such as changing the dates for daylight saving time k Normal wear and tear relating to the non operating functions of the equipment such as discoloration from direct sunlight heat etc 5 Disclaimer and Limitation of Liability TO THE EXTENT PERMITTED BY APPLICABLE LAW OTHER THAN THE EXPRESS WARRANTY SET FORTH IN THIS AGREEMENT BRG PRECISION PRODUCTS INC MAKES NO ADDITIONAL WARRANTIES EXPRESS OR IMPLIED AND DISCLAIMS ALL IMPLIED WARRANTIES WHETHER IN 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BiG ee EEN FACT OR BY OPERATION OF LAW STATUTORY OR OTHERWISE INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNES
247. sssssrsesssssnsessnsesscssnsessessnsessesenees 151 FOUR AND EIGHT BUTTON WALL SWITCH WIRING DIAGRAM ssessseseseseseeseseseeeseeeseecseeeseeeseeeseeeseeeeeee 152 NI UE 153 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com PT i EEN Warranty Agreement BRG Precision Products One Year Warranty 1 Term of Coverage Coverage will be for 1 year Claims must be made during the Warranty Period This Agreement is not renewable The warranty becomes null and void if complete payment is not made within the terms specified under Terms of Payment 2 Warranty BRG Precision Products Inc warrants the Product against defects in workmanship and materials during the Coverage Period 3 Coverage BRG Precision Products Inc will at its option repair or replace the defective Product free of charge provided that you notify BRG Precision Products Inc of the Product defect within the Coverage Period and provided that BRG Precision Products Inc through inspection establishes the existence of such a defect and that it is covered by this Agreement BRG Precision Products Inc will at its option use new and or reconditioned parts in performing warranty repair and building replacement products BRG Precision Products Inc reserves the right to use parts or products of original or improved design in the repair or replacement If BRG Precision Products Inc repairs or re
248. sting three seconds 4 At 03 01 00 daylight saving time 02 01 00 analog clock time the analog clock will turn off the wireless receiver and begin processing the time data The analog clock will make nine attempts to receive a valid time transmission before turning off the receiver 5 At 03 04 00 daylight saving time 02 04 00 analog clock time the analog clock hands will fast forward hour to the correct time 6 At 03 04 21 daylight saving time the analog clock changes from fast forward to normal speed and displays the correct daylight saving time The entire operation takes 4 minutes and 22 seconds during which the second hand will run normally always displaying the correct seconds Notes 1 All electro mechanical clocks introduce a delay while the hands physically move to the correct time For time critical applications BRG offers digital locks that instantly switch between daylight saving and standard time but are typically more expensive than analog clocks Shengbang analog clock movements activate the internal wireless receiver at 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com dB o FNO o First Menu Second Mode Description and Instructions Level Menu Mode Number Level the following times as displayed on the clock 00 00 40 02 00 40 04 00 40 06 00 40 11 00 40 15 00 40 20 00 40 Chouchin analog clock movements activate the int
249. t This Agreement constitutes the entire contract between the parties concerning the subject matter of this Agreement and supersedes all marketing brochures and other expectations understandings communications representations and agreements whether verbal or written between the parties THIS AGREEMENT GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BiG ee EEN Once a return authorization number is obtained ship the products to BRG Precision Products Attn RA xxxxxxx where xxxxxxx is the authorization number provided 600 N River Derby KS 67037 Optional Extended Warranty A two year extended warranty is available The extended warranty must me purchased before the end of the standard warranty The two year extended warranty costs 20 of the product purchase price Optional Advanced Replacement Service Hot Swap For critical applications BRG Precision Products recommends purchasing a complete backup product If a backup product is too expensive or the application is only semi critical BRG Precision Products recommends the optional Replacement Service Hot Swap This service allows the customer to receive a replacement product right away to replace a defective product that is covered under warranty BRG Precision Products will pay for grou
250. t Mode 30 n x where n is the alarm schedule position number and x is the audio player address of 0 9 defaults to 0 all audio players data format nXX Wireless alarm relays and tone generator selection Mode 30 n ar n alarm number 1 99 a relay module address 0 9 r relay to use 0 relays one and two 1 relay one 2 relay two The default is 00 capcode address 0800830 and both relays The most significant digit a determines the last digit of the capcode relay module address to use default 0 The least significant digit r determines which of the two relays to use For example if Mode 30 n 00 where n alarm number then the capcode address will be set to 0800830 and both relays will be used If Mode 30 n 11 then the capcode address will be set to 0800831 and relay 1 will be used This function supports 2 channel and 6 channel relay control modules Mode 37 56 must be greater than 0 to enable wireless relays disabled default Mode 34 n f where n is the alarm number and f determines the alarm function and duration The value 0 59 determines the relay function O default 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 3800 295 0220 First Menu Second Value Mode Description and Instructions Level Menu Range Mode Number Level Relay Output Function H Relay On L Relay Off S Seconds T times Z endless for dual relay
251. ta can be transmitted over great distances to 4 000 feet This is accomplished by splitting each signal across two separate wires in opposite states one inverted and one not inverted The difference in voltage between the two lines is compared by the receiver to determine the logical state of the signal This wire configuration called differential data transmission or balanced transmission is well suited to noisy environments With balanced transmission this potential difference will affect both wires equally and thus not affect their inverse relationship Twisted pairs of wire which ensure that neither line is permanently closer to a noise source than the other are often used to best equalize influences on the two lines Errors can also be caused by high noise levels which affect one side of the receiver to a different extent than the other To combat this each receiver is generally grounded RS422 Serial Communications BRG clocks utilized an industry standard RS422 buss transceiver that meets or exceeds ANSI Standards EIA TIA 422 B and ITU Recommendation V 11 This device includes the following features for improved reliability USE ONLY RS422 VOLTAGES DO NOT APPLY POWER VOLTAGES TO THE SYNC WIRING 1 Thermal Shutdown Protection 2 Positive and Negative Current Limiting 3 60 mA Output Current 4 Automatic Noise Suppression One BRG clock will drive up to 5 slave clocks when wired in parallel or an unlimited number of clocks if the
252. tat feature The temperature sensor is used to operate the alarm output relay The default setting of 50 disables thermostat operation If the setting does not equal 50 degrees F or C then the setting will be compared against the measured temperature If the measured temperature is greater than Mode 45 16 then the alarm output will be active Mode 37 47 determines whether Mode 45 16 is in degrees F or C O F default 1 C The thermostat feature cannot be used with four channel relay operation Use Mode 37 32 to optionally set the relay activation state Set Mode 32 50 1 to enable the temperature sensor If using thermostat operation with Timer Mode set Mode 37 12 0 See also Mode 32 50 and Mode 46 1 Serial Communications Propagation Cancellation Delay This delay is used in conjunction with Mode 32 40 The value in Mode 32 40 is added to the seconds received over serial sync communications A delay is then applied to add fractional seconds to the time received This will effectively cancel the delay caused by the time required to send the time over a serial communications line See also Mode 32 40 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 101 nae SC First Menu Level Mode Number Second Menu Level 9999 9999 111 3231 111 3231 111 3231 Mode Description and Instructions NMEA Propagation Delay Cancellation 0 disabled
253. ter the minute Display Mode 16 may be used to monitor reception activity The left two digits indicate signal quality 01 is a good signal where 30 is a poor signal 00 or 99 means no signal is present The rightmost digit blinks rapidly at 22 seconds after the minute indicating data activity The CDMA receiver is reset every ten minutes when the minute ends in zero If all three digits are solid 0 then there is a problem with the CDMA receiver 11 NMEA 0183 National Marine Electronics Association NMEA standard for communicating GPS data Only the GPRMC sentence is used Data must be valid before the time will be used The time will update once per hour The sync indicator will disable after 90 minutes of no GPS data received Display mode 16 will display 1 1 when the time is received It does not display the number of satellites In addition to setting the time and date coordinate data may be obtained to calculate Sunrise Sunset and Sidereal time See also Mode 26 Mode Mode 45 18 32 64 and Mode 32 69 12 CDMA receiver Model MTSMC C1 second generation reception of local time is assumed The offset for Daylight Saving Time is included in the time received The time is updated every minute at 30 seconds after the minute For use with time zone displays set Mode 32 8 2 to strip daylight saving time See also Mode 32 65 13 Second generation IRIG B receiver GPS 9600 SRST 9600 600 Irig B 600 N River Street Derby Kansas
254. the master clock Use the Up and Down buttons to change the displayed time to match the analog clocks Pressing the Timer Control button again will return the master clock to normal time display The master clock will begin sending correction pulses to the analog clocks at the top of the minute and every four seconds thereafter until the slave clocks match the master clock 7 Check analog clock operation Be sure all clocks are pulsing to the correct time If no clocks are pulsing you can stop the master clock pulsing by holding down the Mode button until a 0 appears then let go A 1 will then appear Press the down button once to return to the time display Check your connections to the master clock To restart pulsing press the Timer Control button adjust the time displayed to match the analog clocks then press the Timer Control button again to exit and return to normal time display The master clock will start sending fast pulses beginning at the top of the minute 8 Ifa few analog clocks are not working but the majority of the clocks are working check your wiring to these few clocks Once they being pulsing manually move the time on the analog clock to match the time on other secondary clocks This is accomplished by turning the knob on the back of the analog clock 9 If secondary clocks need to be replaced simply connect the new clock to the sync wires Then manually change the time of the analog clock to match other analog
255. the menu system Pressing the Timer Control button at any time will save your changes and exit the menu system Pressing the Mode button while a parameter value is displayed will back up one level Press Up or Down to move to the next mode item Pressing the Down button until mode 0 is reached will exit the menu system Pressing the Timer Control button also exits the menu system The menu will timeout and return to normal operation after 60 seconds in inactivity If the display simply blinks when the Mode button is pressed then the control buttons are locked out See Mode 37 29 for more information about control button lockout Not all of the following operating modes are included Some operating modes must be specifically requested A special operation menu is available for restoration and diagnostic purposes Pressing and holding the mode button will cause either four one s or four two to be displayed Four one s means no configuration has been stored in secondary memory Four two s means a previous configuration has been stored in secondary memory Continuing to hold down the mode button allows shortcut menu operations The one s or two will disappear and the display will begin counting up from 0 Special commands will execute if you release the mode button while one of the numbers are displayed The special commands are 0 Stop sending analog clock synchronization pulses 600 N River Street Derby Kansas 67037 316 788 2000
256. then Mode 37 22 overrides all Mode 51 6 parameters Digital Lettering Individual Intensity for 5X7 Alpha Digits Only 0 default Use default intensity set using Mode 3 1 15 Override default intensity with a setting of 1 through 15 with 1 being low intensity and 15 the highest intensity 16 Blink alpha characters once per second to indicate sync GPS CDMA IRIG B and Ethernet reception If no sync source is used setting Mode 32 2 4 will blink the designated characters continuously Mode 51 7 n 16 where n is the alpha character position is used to indicate which character positions are to blink See also Mode 32 2 17 Blink alpha characters once per second when timer is running Set Mode 32 2 4 to activate This mode is helpful to blink the colon on alpha timer that do not show seconds Mode 51 7 n 17 where n is the alpha character position is used to indicate which character positions are to blink 18 turn on digit when second is odd Modes 51 7 18 and 51 7 19 can be used together with adjacent digits to make an alternating digit display as with railroad crossing alternating lights Any dig can be made to blink with the second 19 turn off digit when second is even Modes 51 7 18 and 51 7 19 can be used together with adjacent digits to make an alternating digit display as with railroad crossing alternating lights Any dig can be made to blink with the second 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720
257. ting parameters are maintained in flash memory which does not lose its memory when power is lost Changing operational parameters The display is used to display and edit all operating modes and parameters Press the mode button and mode one will appear on the display If the month day appears press mode again to return to the mode one display Press the Up button until you reach Mode 20 Follow the steps below to configure Press the Mode to exit to the previous level Press the Down button until 0 which will exit to the previous level Press Down again to mode to mode 14 Once at mode 14 press Mode to display the current operating mode Using the Up or Down buttons select mode 2 for up timer or mode 3 for down timer Press the Mode button to exit back to the previous level Press the Down button to move to 0 which will exit to normal display mode Other modes Mode 7 Beginning hours and minutes or the value to appear when the Down button is pressed Mode 8 Beginning seconds or the value to appear when the Down button is pressed Mode 9 Ending hours and minutes The value is optionally used to activate a contact closure or to stop the timer Mode 10 Ending seconds The value is optionally used to activate a contact closure or to stop the timer Mode 13 Stop Timer at End Time or continues when the End time is reached Mode 20 Display Mode set to various display formats as needed Mode 26 Blinking Display Display may b
258. tion l resume real time when End time is reached 2 stay in timer mode when End time is reached 3 enable split time display default 4 enable alarm schedule switching Tiger version 4 00 or later If mode 32 4 1 the timer will switch immediately to real time when the End time is reached If a delay is required before switching back to real time then set mode 32 4 2 and set mode 32 7 to the minutes of delay before returning to real time If mode 32 4 2 and mode 32 7 0 then the timer will remain in timer mode when the End is reached The code blue line overrides the start button Mode 34 n 99 auto starts code blue timer from a real time alarm setting Mode 34 n 99 auto starts code blue timer from a real time alarm setting Mode 32 4 3 enables the split time display The Start and Stop buttons operate the timer Momentarily pressing the timer control button while the timer is running freezes the display for the number of seconds specified by Mode 32 31 The default is 3 seconds The timer continues to run while the display is frozen See also Mode 32 31 See also Mode 32 13 to activate the Timer Control using the real time alarm schedule Timer control Timer Counter Direction O up default 1 down External Timer Control Line 0 momentary contact closure default 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BR o FNO o First Menu Level
259. ts minus 20 equal the month For example March 15th 2315 April 1st 2401 The day of the year derived from this rule is stored in Mode 52 1 If the DST date is a fixed day i e 15 of the month then set this mode to 0 and enter the Julian day into Mode 52 1 instead See Mode 24 n 10 and Mode 24 n 11 See also Mode 45 21 Mode 45 22 and Mode 45 23 Custom Daylight Saving Rule Ending Value for Mode 24 n 10 Default 1117 First Sunday in November Values for rule driven custom daylight saving time for Mode 24 n 10 The format is MMRD where MM month 1 12 R instance of the select day of the week 1 5 5 last instance D day of the week 1 7 where 1 Monday and 7 Sunday For example 357 represents the last Sunday in March or 1117 represents the First Sunday in November If the value gt 2000 then the right two digits represent the day of the month The left two digits minus 20 equal the month For example March 15th 2315 April 1st 2401 The day of the year derived from this rule is stored in Mode 52 2 If the DST date is a fixed day i e 15 of the month then set this mode to 0 and enter the Julian day into Mode 52 2 instead See Mode 24 n 10 and Mode 24 n 11 See also Mode 45 20 Mode 45 22 and Mode 45 23 Custom Daylight Saving Rule Starting Value for Mode 24 n 11 Default 0 Values for rule driven custom daylight saving time for Mode 24 n 11 The format is 600 N River Street Derby Kansas 67037
260. urs minutes Mode 20 3 2 set zone display format to hours minutes Mode 20 4 2 set zone display format to hours minutes Mode 21 1 8 set Pacific offset from UTC Mode 21 2 7 set Mountain offset from UTC Mode 21 3 6 set Central offset from UTC Mode 21 4 5 set Eastern offset from UTC 10 Mode 22 1 1 point display position to the desired time source 11 Mode 22 2 2 point display position to the desired time source 12 Mode 22 3 3 point display position to the desired time source 13 Mode 22 4 4 point display position to the desired time source 14 Mode 23 1 24 set the display position to 24 hour display format 15 Mode 23 2 24 set the display position to 24 hour display format 16 Mode 23 3 24 set the display position to 24 hour display format 17 Mode 23 4 24 set the display position to 24 hour display format 18 Mode 24 1 1 set to U S daylight savings time 19 Mode 24 2 1 set to U S daylight savings time 20 Mode 24 3 1 set to U S daylight savings time 21 Mode 24 4 1 set to U S daylight savings time 22 Mode 32 3 2 Numeric display field multiplier 23 Mode 51 1 to 51 32 enter 8 digital zone letters for each zone 24 Mode 52 2 16 number of alpha digits installed 25 Mode 51 3 1 frame rotating display 26 Mode 51 4 50 set frame rotation speed in seconds 0 59 OOS Oy ie Sho 600 N River Street
261. value allows easier viewing when alternating display modes are used For example when alternating between time and date the time could display for 5 seconds while the date only displays for 2 seconds This reduces confusion when numbered displays are alternating back and forth The value Mode 37 13 acts as a multiplier for Modes 37 41 37 42 and 37 43 For example if 37 13 10 then setting Mode 37 41 99 would cause a 99 second delay Timer Reset List Entry Point This mode is used to store the timer reset list entry point used when Mode 37 14 11 This mode is automatically set and does not require any changes using the menu system Language Used by Date Displays 0 English default 1 Spanish 2 German 3 French This Mode determines the laugauge to use when the alpha month or alpha day of the week is displayed Display Blanking 0 disabled default 1 Manual Display Blanking using the Timer Control button 2 Automatic Display Blanking using the Alarm Toggle function This feature overrides other Timer Control functions and is for real time mode only Timer Control Blanking Pressing the Timer Control button blanks the display Pressing the Timer Control button again or cycling power restores the display to normal operation Alarm Toggle Blanking The real time alarm may be used to turn the display on and off For example setting the alarm toggle to turn the relay off at 8 00pm will blank the display If the rel
262. ver Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com e www brgprecision com 800 295 0220 Up Down Counter Configuration Your counter clock has been configured to your specifications You may change this configuration at any time If your clock has serial sync wires connect the red and black wires to the red and black wires of a master clock Slave clocks receive sync pulses while master clocks send pulses every second If equipped with an external control wire option the wiring diagram for the breakout box can be found later in this manual These wires may be attached to normally open dry contact closures for remote operation If your clock is equipped with the optional infrared remote control it is shipped attached to the back of the clock Reference the infrared remote instruction section found later in this manual The internal battery will maintain the time for about ten years All operating parameters are maintained in flash memory which does not lose its memory when power is lost When power is applied to the clock all displays will illuminate and display the time s as configured Changing operational parameters The display is used to display and edit all operating modes and parameters Press the mode button and mode one will appear on the display If the month day appears press mode again to return to the mode one display Press the Up button until you reach Mode 14
263. very day If Mode 37 62 7 or 9 then everyday no transmissions will occur when the hour equals 0 22 or 23 4 activate full time reception every day If Mode 37 62 7 or 9 then everyday no transmissions will occur if the hour is less than 2 or greater than 19 This mode can be used for externally powered clocks and DuraTime battery powered analog clocks This mode determines when movements are forced to use all time data received All other regular reception times the Chouchin just receives and corrects the seconds Full time reception also occurs when the batteries are inserted when the reset pins are shorted or when the receive button is pressed for three seconds During full time reception the clock hands stop until all time is received Then the hands move to the time received Tiger Version W4 78 and older If Chouchin and Shengbang movements are used in the same system then install hands on both movements in the 10 00 position set Mode 37 62 9 and Mode 37 76 1 When switching between daylight saving and standard time the change will occur when the clock hands are at 2 04 Tiger Version W4 79 and later If Chouchin and Shengbang movements are combined in the same system or by themselves install hands on both movements in the 12 00 position set Mode 37 62 7 and Mode 37 76 0 When switching between daylight saving and standard time the master transmitter will not broadcast time from 8 00pm to 1 00am the following day on the
264. with the master clock If your clock has control wires the Red and Black wires activate the Up button and the Blue and Black wires activate the Down button These wires may be attached to normally open dry contact closures for remote operation If your clock is equipped with the optional infrared remote control it is shipped attached to the back of the clock Reference the infrared remote instruction section found later in this manual The internal battery will maintain the time for about ten years All operating parameters are maintained in flash memory which does not lose its memory when power is lost When power is applied to the clock all displays will illuminate and display the time s as configured When clocks are synchronized using serial wire sync slave clocks incorporating an alert horn can be configured to follow the schedule of a single clock This allows the alarm schedule in a single clock to control the alert horns of many clocks Mode 32 16 enables and or disables default this feature Changing operational parameters The display is used to display and edit all operating modes and parameters Applicable modes Mode 27 Alarm Hours and Minutes This field is required Mode 28 Alarm Seconds Use this to optionally set the alarm to the nearest second Mode 29 Alarm Day Code This field is required Mode 5 Alarm Output Duration Mode 30 Individual Alarm Output Duration Mode 32 13 Alarm Pulse Control Mode 32 1
265. y defaults control of the clock will be lost To regain control of a clock using 16 segment lettering hold down the Up button while power is applied To regain control of a clocks using 5x7 lettering hold down the Timer Control button while applying power This will provide enough control to restore customer defaults Accept or Ignore Global PC Commands 1 accept default O reject global address PC commands PC commands received with an address of 0 will be ignored if Mode 32 59 0 This mode also affects global moving message commands received See also Mode 32 42 SR ST Port Operation and Ethernet Hardware Reset 0 Ethermet hardware reset default 1 ST receive and local processor transmit 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com BR o FNO o First Menu Level Mode Number Second Menu Level Mode Description and Instructions 2 SR ST hardware repeat no local processor transmit 3 SR ST hardware repeat with local processor time transmission on ST port v4 48 For Tiger PC board version 4 5 or older always set Mode 32 60 0 For Tiger PC board version 4 6 or later setting Mode 32 60 2 will immediately repeat all serial data received on the SR port out the ST port The local processor cannot transmit on this port in this mode The local Tiger processor receives the data but will not be able to transmit Setting Mode 32 60 1 allows
266. y include and input and output and are wired in series Common Cat 5 twisted pair data cable may be used to carry serial data between clocks DO NOT USE POWER WIRE OR NON TWISTED WIRE AS DATA CABLE use Only Ninwisiog Pak Use only 1 twisted pair pe CH5 Data Cable _ J Unused twisted pairs NEE Unused twisted pairs Diagnostics The sync output of the clock may be measured with a volt meter There should be 5 volts when the meter s read lead is connected to the red Output sync wire and the meter s black lead connected to the clock s black Output sync wire If the clock is configured as a master to send sync data once per second you will see a momentary voltage drop using an analog meter 600 N River Street Derby Kansas 67037 316 788 2000 Fax 720 293 9393 sales brgproducts com www brgprecision com 134 RT EE Digital meters may not be fast enough to detect the sync pulse If the clock is configured as a repeating slave it will only send sync data when sync data is received In other words it is configured to repeat all sync data received LED sync detector A common LED light emitting diode may be used to detect the presence and polarity of sync data Connect the anode of the LED to the red Output sync wire and the LED cathode to the black Output sync wire On most 5mm LED s the anode lead is the longer of the two leads The LED should continuously illuminate If the clock is configured to transmit

Download Pdf Manuals

Related Search

Related Contents

Philips NTRX510  Philips Spot light 52164/17/86  Guardmaster Safety Relay EM  Cleaning up the Tower: Numbers in Scheme    Manual de instrucciones MPC Eintauchkühler, es  Samsung SF-375TP Kullanıcı Klavuzu  User Instructions  Fiskars 57056935 Instructions / Assembly  Manuel d`installation SE 1000  

Copyright © All rights reserved. Failed to retrieve file