SIM Bank Scheduler Server User Manual (for Version
Contents
1. Bank Name the name of this GoIP given on the server by the user which should be easy to remember Password the password of this GoIP set on the server by the user The same ID and password are required to be set on the GoIP terminal and registered on the server Type the model of GoIP currently there are GoIPxn Zone ID the ID of GoIP location for example the GoIP located in place a will be set as area 1 while the GoIP located in place b will be set as area 2 which should be set by the user on the server and must be numeric This property goes into effect only when the group scheduling mode is set as the GoIP binding mode Zone Name a name given for this zone on the server by the users to facilitate their own memory 12 1 2 Add GoIP Click Add in GoIP management navigation to enter the adding terminal page GolP Eanagement Password Confirm Password Zune ID Number Zone Name corr When adding Golp in addition to the parameters mentioned above the group location can also be assigned All the GoIP lines will be placed in this group when adding GoIP and then the user may Set a certain line separately in the GoIP Line List Group place the line under the GoIP into a scheduling group If there is no need for scheduling manually fixed binding mode is required please select the option None 1 2 1 3 Modify GoIP Parameters Click Madifyin the GoIP list then2. ESERSE Current Location S00 Bank List DE Bank ID Bank Mane Paremord Oneration eae 123 SIN Binkl dee Modity SktLet Reboot Dalta NI DE 124 SIW Banke LZ Mody SkrL er Reboot Dakia Data Eanage Total Z reis index beckeord formad rri pores Lipo lrs pe poto Thelpage Deer Esnaupr Figure SIM Bank List The parameters of the SIM Bank such as Bank ID Bank name and password can be seen from the SIM Bank List Bank ID the ID for this SIM Bank set on the server by the user which must be numeric Bank Name the name of this SIM Bank given on the server by the user which only used to easy to remember Password the password of this SIM Bank set on the server by the user SIM Bank terminal will be registered to the server according to ID and password 1 1 1 2 Add SIM Bank Click Add in SIM Bank management navigation to enter the adding terminal page SIE Bank Eanagement Add SIE Bank Add SIE Bank SIE Bank ID Number SLE Bank Name Password Contirm Password Remain Time of ut Call E Time Unit of Call 5 Group EE for fi ecl INEI NODE GoIP defaut INET Prefix Auto ad 7 INET for each slot WROHSIM BankE SA FAE INEITRGZL ASIM BankPeT iz REN MRL RETA Lot AN ERT 2E Add Cancel When adding SIM Bank in addition to the parameters mentioned above such as ID name and password other parameters can also be specified These parameters are the
3. 223456789012315 Remain Time of y Qut Call HE ill Time Unit of 6 Call S Enable Line Fnable Save Parameters Description Group the scheduling group to which the SIM Slot belongs under the group scheduling binding mode and the SIM Slot and GoIP line of the group will automatically dock with each other according to the group rules It is set by the user on the server Plan to bind GoIP Channel this option appears only when the Group parameter is displayed as None and the Slot will fall into the manually fixed binding mode The GoIP line ID in manually fixed binding mode will also appear in drop down list and the ID of the GoIP line to be bound should be set by the user 1 2 GoIP Management 1 2 1 GoIP Terminal Management 1 2 1 1 GoIP List Deer Keren acon Ferai si onsi Super Col Eanapgmezt Bavigation Let Add eee oe Current Lecetlon 6oIF List PEE GolF IP Golf Hama Type cone IP tome Hume Paseaord peration er 125 xci pf GoIPad i 123 Moat Chains Rebost Delete Boni tor Ln acing GolPrd TT ab Mody Cnannals Reboot Datete Data Fane Total X rmx index bekeard forward end ranw iire OOo ls pee mio Thelrexe i llaer Hansz Figure GoIP List The GoIP parameters including the GoIP ID the GoIP name type area ID area name and password can be seen from the GoIP List GoIP ID the ID for this GoIP set on the server by the user which must be numeric
4. 1 for the new docking and this process may exceed the hibernation time so as to achieve the roaming effect of SIM card and proceed to the next continuous running stage In order to ensure that the process may proceed smoothly and rapidly try to ensure that the numbers of lines in different areas are basically the same so as to prevent long hanging or uneven distribution Operation it allows the user to manage sim line and goip line modify Re allocation Interval and Sleep Interval of the group or delete the group 1 3 1 SIM Slot Line Management in Group brou anagcment Mavi gation Group List Add Group Current Location The hed total 1 members loe Selected 1 member Choi ce Sis Ih Statum Group Oper atl om P 12401 OFFLINE armupl Sim Modify 12425 OFFLINE Sim haod E 12424 OFTLIBE sim Padiby 12422 OFFLINE sim Moa F 12423 OFFLIBE sim Poo diby 12420 FFLINME Sim Moddiy E 12421 OFFLIBE Sim Modir 12418 FFLIHE Sim Moddiy F 12413 OFFTLIBE Sim Madfhy o 12416 OFFLINE Sim Mody Click SiM Member to enter the page This page lists all the SIM Slots on the server and shows all the SIM Slots of this group marked with tick and shown in red where the user may specify certain lines and place them into this group 1 3 2 GoIP Line Management in Group Current Location The group heed total f members Hcr Selected s penber I E w r 12404 OFFLINE Sop Modir r 12403 OFFLINE Gop Wody r 19408 OFFLI
5. Miembar GolP Membe Sedar Daite leaf D SM Member GolP Membe Scnecuer Dotcte V Chole current oaae Delete pelected Tata 9 reels inde bacbesrd foresrd end psges i lrage d rceslk psae acto Theipazs Figure Group List After a few SIM Slot and GoIP lines are placed into the same group the server will carry out the automatic docking binding operation for the Slot Channel lines within the group in accordance with the rules and Slot Channel may achieve the phone conversation function only if the docking binding has been done successfully Group Properties Description Name the name given by the user while creating a new group Re allocation Interval Working Time the continuous running time after each docking has been done Sleep Interval Hibernation Time after the end of the continuous running stage the Slot Channel in docking binding status may cancel the docking binding status and enter the hibernation stage after the end of the hibernation time it may proceed to the next docking during the docking process SIM Slot will not select the GoIP line with which it docked last time and if the area property of GoIP Channel has a value nonzero the SIM Slot line will select a GoIP line of which the area is different with the one it docked last time For example if the GoIP line docked with SIM Slot ID 10032 last time belongs to area 1 then SIM Slot will select the GoIP line which does not belong to area
6. properties of the SIM Slot When adding a SIM Bank those parameters will take effect on the 32 Slot generated by it Once it has been added the user may make special modifications on these parameters in single SIM Slot The meaning of these parameters The Remain Out Call Time minutes it is the limit time for the SIM Slot out call When a call is made with the SIM Slot the remain out call time will be calculated and less the call time When the remain out call time becomes 0 the SIM Slot will not be able to make a call and will not be involved in the binding with GoIP line similar to the Disable status If this value is left blank or negative there is no limit time for the outbound call Time Unit of Call seconds when it refers to the computing unit for the outbound call time the default 1s 60 seconds If the call time 1s less than 60 seconds it should be calculated as 60 seconds Group place the Slot under the SIM Bank into a scheduling group If there is no need for scheduling please select the option None 1 1 1 3 Modify SIM Bank Parameters Click Modify in the SIM Bank List for modification then enter the parameter modification interface and modify the name and password Nodify Sim Bank SIE Bank ID 125 SIE Bank Name SIM Einki New Password Confirm fe Password e Will not change password with blank input box named New Password and Confirm Password Save Cancel 1 1 1 4 Reboot Dev
7. two types namely manually fixed binding mode and group scheduling mode Group Location it goes into effect only if the group scheduling mode is set as the binding mode and displays to which scheduling group the Slot belongs Plan Bind it goes into effect only if the manually fixed binding mode 1s set as the binding mode and displays the GoIP line set by the user with fixed binding Bind Channel displays the binding GoIP line at that moment Remain Time of Out Call minutes it 1s the limit time for the SIM Slot out call When a call is made with the SIM Slot the remaining outbound call time will be calculated and less the call time When the remaining outbound call time becomes 0 the SIM Slot will not be able to make a call and will not be involved in the binding with the GoIP line similar to the Disable status If this value is left blank or negative there is no limit time for the outbound call Time Unit of Call seconds when it comes to the computing unit for the outbound call time the default 1s 60 seconds If the call time 1s less than 60 seconds it should be calculated as 60 seconds Disabled or not when the Slot is disabled it will not be involved in the scheduling and binding 1 1 2 2 Modify Slot Parameters Click Modify in the SIM Slot List to enter Modify Slot Parameters page and modify the parameters of a single Slot Nodify SIE Slot Settings SIE Slot ID 12301 Group test INEI Hode Set with SIM 7 INEI
8. NE Gup Mody r 19400 OFFLINE group Gap Modfy Figure GoIP Line Management in Group Click SOIP Member enter the page which is similar with SIM Slot line 1 3 3 Modify Group Scheduling Rules Group anazgement cheduler of Group Wodify Scheduler of Group Group Name groupl Re allocation 5 Interval m Sleep no Interval s Save Cancel Figure Modify Group Rules Click Scheduler to enter the modification page and modify the Re allocation Interval minutes and Sleep Interval seconds of group rules 2 Status All the lines on the server may be seen from Monitor gt SIM Slot and Status gt GoIP Line Dears Ee ae T Permise ora Super Havigatkon List Add Conflguratlon Current Locstian SIN Bank Slot List Titor Line Slot Bimi Fian Wind oa Remain Time of Gut Time lnii er ELE Slots Status ID Node 77 Jind Channel MI Moda Set INMI Rall OD Calpe Saale pa OFFLINE 123901 STP tent mat th OSApETHEIT2SLE Luo 83 Enable Data Kanare Mode SIN Toer Manage OFPLIME 12302 Sra icut gelbe marame Loo Ba Enable Gru 20 Set with OLI 12933 tent cia ERMESTHNDIPRDR Loo a Enable iym Ser with OFFLIME 12d tant sip EDMESTRNDISHE Loo B Enable CPPLIME 12505 nd teet SM pasar PH 12555 L n pa Enable Frou Ser wich OFPLIME 1296 S QU tet SIR TRTGEA01255 Loo gn Erable DFELIME 10507 ro feat M PISA ER TRA STE Lob pa Ereble I CN rnur inIP CFPLIME 12998 ma
9. SIM Bank Scheduler Server User Manual for Version 1 01 1 Introduction to the SIM of Bank Scheduler Server SIM Bank Scheduler Server SIM Server for short is a type of server software launched by our company for scheduling the SIM Bank and GoIP line docking By using this software SIM Bank and GoIP device will be registered on the SIM Bank Scheduler server via UDP network protocol and then the user can proceed to the binding management SIM and GoIP status query and other management operations by accessing the server with a web browser By using a SIM Server it is possible to manage more than 10 000 SIM cards simultaneously and to achieve the effect of unified scheduling GolP 11 y U f a n i i GolP 2 JL et I rz far DPN TOT l ru E L ria ae j p E i j ji n Y TER SMB32 n SIM Server Installation Requirements SIM Bank Scheduler management server is a set of software using PHP and mysql which is installed in the 32 bit Linux device It is recommended to use Centos 5 32 bit Linux system and apache web server Version apache2 or higher php5 or higher mysql5 or higher is required UTF 8 character encoding is applied to the software if your webpage is garbled please change the default character encoding of mysql to UTF 8 The yum instructions of Linux system may be used for the installation of abovementioned components Run the instructions in sequence for installation yum install my
10. base may be selected to backup to the server or the Local computer Bein page Logout T User Name admin Perniaelons Super Configuration Boni tor E z Data Panse System Manage The directory of backup earver is backup Data Backup le CA Ae PS s Osta Inport User Wanage ES Date Backup Backup mode fal Backup all date Backup all data to a backup data sheet paper Choice of target locations ig Backup to server Backup to local 3 22 Data Import the backup data of the server or local computer may be used to restore data Wan page Logout oo 7 THAI H Vaser Mame snin Perr asioni uper Data Barrage Daa Backup Data import Configuration Toni tar Date Banage ntice ayetan Bars Data Backup This fraturc ix in the cestermstion of backup dato zt the same time corcring all the original data Haks wee th Data Irport recovery in order to avoid data loss Jer I E ats recovery file fron local zhould be zraller than the maximum uplosd nox it is 108 Cr beeraizse you zbeuld wu Porn acer PEN server backup E Eezunetion of documents from the server E Resume fram the local paper 4 User Manage emn page Logout o gt v User Wemezadrin Pernisslons Super eer Nenasgement Navigation Mecitynyeet Add adminiemaror Modify others ITE Configuration Toni tor Data Nannage aser image Modify Eyzclf E Name sinl n Current Location Change Password E Oth
11. enter the parameter modification interface and modify the GoIP name area ID area name and password GolP Eanagement Current Location Eodify a GoIP GoIP ID 125 GolP Name gcip8 Zone ID Number Zone Name New Password Confirm Password Will not change password with blank input box named New Password Save Cancel 1 2 1 4 Reboot Device Click Reboot in the GoIP List to reboot the GoIP terminal 1 2 1 5 Delete GoIP Click DJeletein the GoIP List to delete the record of this GoIP on the server 1 2 1 6 Enter GoIP Line List Click Channels inthe GoIP List to enter the line list of this GoIP See 1 2 2 1 2 2 GoIP Line Management 1 2 2 1 GoIP Line List GolP Channel F0 d ELI Havigation List Add Current Location GolP L23 Channel List Status GSE Statua Golf ID Galf Hame Line ID Bind Node Groop Sle Bind Zone ID Zone Hame Enable peration OFFLINE LOGOUT 123 goips 12301 Grap mode tesi Ensble Modify Reboot OFFLINE LOGOUT 123 gnip 12302 Crop mode tesi n Enable Modify Reboot OFFLINE LOGOLIT 193 golpe 123605 Grogs mode teat Enkle Modit Reboot FFLIME LOGOUT 123 Enips 12504 Grop mde tesi i Enable Modity Reboot OFFLIKE LOT 195 galps 12306 Grog mode test Enable Modit Reboot OFFLIBME LOGOUT 123 gnips 1236 frog rnds test n Enmble Modify Reboot OF FLIBE LOGOUT 123 pnips 123607 frog rods test n Enmble Modihy Reboot OFFLIBME LiGOUT 123 Enips 12508 f
12. er Us anaga Other Users How 7 Confirm i edel Remark 1111 Will not change password wlth blank input box named em Pazzmord Save _Carcel The users may modify their own login password Senior administrator may modify the server user s information add and delete user in User Manage gt Manage Other Users FECES LU RS oa Haviratinn Mody myself Add administrator Modify others Configuration Current Location Hodify a A dninztrnt ar oni tar Data Hanae User Banace Nodify a Adminetrator Change Pagseard ddelnateatar Manage Other Users Mones oo Hee Passeurd 8 sis Paszsaurd Privilege Level Super Adminctr Remark i111 l Will oot change pasmaord with blank input_box ranad Mew Pazeword Save Cancel The user s permissions fall into two categories namely Super administrator and Normal administrator Normal administrator does not have the permission to manage other users and database import Settings of SIM Bank Terminal Page SIM Bank Setting SIM Bank Mode Server Address SIM Bank ID SIM Bank Password 123 After the information of SIM Bank has been added on the server the registration of server is completed only after the client side mode has been enabled on the SIM Bank terminal and the card has been inserted User ID and password are the ID and password set on the server for the SIM Bank Note that the SIM Bank Slot is registered on the server o
13. heduling rules The group is featured by two properties namely re allocation Interval working time and sleep time see 1 3 Group Management and GoIP has the property of zone area ID see 1 2 GoIP Terminal Management The group scheduling process is as follows 1 At the very beginning SIM Slot and GoIP line in the group bind randomly and start to run normally 2 When the working time ends SIM Slot and GoIP line cancel the binding and turn into the hibernation state 3 When the hibernation time ends SIM Slot and GoIP line rebind in accordance with the following conditions 1 SIM Slot will not select the GoIP line with which it has been bound last time in order to achieve the effect that the SIM card may automatically switch the Channel 2 SIM Slot will not select the line which has the same area ID with the GoIP line with which it has been bound last time in order to achieve the effect that the SIM card may automatically switch the location Repeat working processes 2 and 3 after the re binding Detailed Description The software consists of four major parts Configuration Monitor Data Manage and User Manage The Configurations are the highlight of the software 1 Configuration 1 1 SIM Bank Management 1 1 1 SIM Bank Terminal Management 1 1 1 1 SIM Bank List Click Configuration gt SIM Bank to enter the SIM Bank List User Hare isinin Permisa3 ooo 2 Supe SIM Bank ansgement Mavi getien List Add
14. ice Click Reboot jn the SIM Bank List to reboot the SIM Bank terminal 1 1 1 5 Delete SIM Bank Click Delete inthe SIM Bank List to delete the data of this SIM Bank on the server 1 1 1 6 Enter Slot List Click LI5t in the SIM Bank List to enter the Slot List of this SIM Bank See 1 1 2 1 1 2 SIM Slot Management 1 1 2 1 Slot List Deer Hone ain Perini agl ons Spee SIN tiet Eanagcsent Bavigatkloni List Ack Configuration Current Location SIF Bank i23 Siow Lisi ITP i p l Line 3lor Bind Plan Bind TEET Eemaln Time of Tim Mir of uuum sts 1D Node UP pind Chamel Bode Iris ems Qut Callin tr PEE URERNEEM l Bool var WELDE ioi yo test Ta Gee Lo m Enable Moit Dais Fansae E poene ii 1 OFLE 1220 foe cxt guess TENGERE Loo E Endble Moti LT 1 n 3 wx MELIE 12x03 Pim Test iA ee 2ZH5ETERDLIJAE Loo Bl Enable boii i fa eT 1 Tan ze D FLIE 12 4 UP o aug Be wh oe q5 eT BIOL NE Loo 0 Enable Modly lide EA VERDE n s GLE iaxe TF ient piii RAE T T abii Mai Tn h TaJ ah ve HFLIE 1506 a duet T Te aprER43EL LTHEE Loo ei Enable Mody UFLIE 12200 TOP iant sa peas 2534567 ptr 2315 Loo i ible Modi The following parameters may be seen in the SIM Bank Slot List Status whether the SIM Slot is registered on SIM Server Slot ID the ID generated for the Slot of each line according to the ID of SIM Bank The IDs shown in the list from xxx01 to xxx32 indicate the IDs from the line 1 to the line 32 Bind Mode it falls into
15. nable line Enable Save Cancel Parameters Description Group the scheduling group to which the line belongs under the group scheduling binding mode and the SIM Slot and GoIP line of the group will automatically dock with each other according to the group rules It is set by the client on the server Plan to bind SIM this option appears only when the Group parameter is displayed as None and the GoIP line will fall into the manually fixed binding mode The SIM Slot ID in manually fixed binding mode will also appear in drop down list and the SIM Slot ID to be bound should be set by the user 1 2 2 3 Reboot GoIP Line Module Click Reboot to reboot the GSM module of the GoIP line 1 3 Group Management Click Configuration gt Group Management to enter the group list Deer Wom eden Permian ong Super Bavisatlon Grup List Add Graup Tont gurat lom Current Location Groupe Lim EUM Choicc Mam Ec allucniiun Interval ml Elop Interval ta Operation GalP E group 15 1 Sid Member SdF tember Scheculer Drite ones ca E test p Sid Miember GolP wembe Serecuer Cee User Banege J eledniest iw 5 SM Member GAP Member zeeeuer Deere r rkerzan LOG JM Member GaP Member Schecwer Datete R helen 10000 10 Sid Member SF Member Scheduler Diatate r bel er TD Sid tember GolP tember Scheduler Dietebe pong chenghry SM Member GolP Member Shader Dosia re port Kar po SM
16. nly when the SIM Card has been inserted Settings of GoIP Terminal Page Remote SIM Enable Disable Server 192 168 2 2 ID 00 Password 234 After the information of GoIP has been added on the server the registration of server is completed only after the remote SIM has been enabled on the GoIP terminal User ID and password are the ID and password set on the server for the GoIP
17. rog mode test n Enable Meodity Reboot Total rowls index backward forward end pagez i ipsgs ris pame goto Thelpage 7 The following parameters may be seen from the GoIP Line List Status offline indicates that the line has not been registered on the server online indicates that the line has been registered on the server IDEL indicates that the line has been registered on the server and it is idle BUSY indicated that the line is busy GSM Status shows whether the operators are registered on the line module which can be divided into LOGIN and LOGOUT ID the ID of GoIP The GoIP name the set name of GoIP Line ID the ID generated for each line according to the ID of GoIP The IDs shown in the list from xxx01 to xxx08 indicate the IDs from the line 1 to the line 8 Bind Mode it falls into two types namely manually fixed binding mode and group scheduling mode Group Location it goes into effect only if the group scheduling is set as the binding mode and displays to which scheduling group the line belongs SIM Bind displays the binding SIM Slot at that moment Disabled or not when the GoIP line is disabled it will not be involved in the scheduling and binding 1 2 2 2 Modify GoIP Line Parameters Click Modlfy in the GoIP Line List to enter the Modify GoIP Line Parameters page and modify the parameters of a single GoIP line GoIlP Channel Management Nodify Goip Line Settings GoIP Line ID 12501 Group test E
18. scheduler Install finish Please restart your httpd Sim bank scheduler URL http your ip smb scheduler Reboot httpd server etc init d httpd restart when the installation is completed The management interface can be accessed by opening http your ip smb scheduler with a browser default user name admin password admin Note 1 The system will run two programs xchanged and smb cheduler in the background if these two processes are not started manually run usr local smb scheduler run scheduler and add usr local smb scheduler run scheduler into the boot automatic operation 2 If the processes are still not started please check whether the mysql database is installed perfectly and whether php mysql components are installed or not 3 If the firewall 1s enabled by the operating system please add 56011 udp port to the trust list Update Where the old version has been installed and it is required to update to a new version of SIM Server the update steps are as follows Log in Linux system as root user Run command wget http 118 142 51 162 update smb scheduler install v1 6 3 tar gz to downloa d installation package Run command tar xzvf smb scheduler install tar gz to uncompress package Run command cd smb scheduler install to enter installation folder Run command update sh to update Management Open the browser and enter http IP smb scheduler replace the IP with your IP address and then you can enter
19. sql yum install mysgl server yum install mysql devel yum install mysgl client yum install httpd yum install php yum install php mysql If you encounter any problems during the installation process please contact with us or we may install it for you The network environment packet loss rate required by this system should be less than 5 lt 5 the network delay should be less than 300 ms 300 ms GoIP and SIM Bank to the Server respectively and the single channel SIM peak flow should be 11 kbs Installation It is required to enter the mysql root user password for installation and the installation steps are as follows Log in the Linux system as system root user 118 142 51 162 update smb scheduler install v1 6 3 tar gz to downloa Run command wget ht d the installation package Run command tar xzvf smb scheduler install tar gz to uncompress package Run command cd smb scheduler install to enter the installation folder Run command smb_ scheduler install sh to install The installation process is interactive installation which is as follows smb scheduler install Starting Sim Bank Scheduler Server install Configure httpd config Enter the httpd config file PATH default etc httpd conf httpd conf Default press Enter Import Databases Enter the Mysql root password if the password exist Enter your Mysql PATH default usr bin mysql Default press Enter Copying file to usr local smb
20. teet defe OOO Lao amp Erb Se GST eae apices Gare eee itn mE l Havigotien Let Add ComPigurat bie Current Location olPOChanne Lict Boni tor toiu OHE Sistuw GolP ID olf Bem Line ID fied Bode zuup Zis Bind Zonc ID Zeme Wome Ennblc M eal OFFLINE LOGOUT 123 mip iHi Grow node dest a Erable eee eee OFFLINE LOIT 123 pip 12308 Coop mie dert i Ecab le OFFLINE LOSOUT 123 goipe 1500 Geo mode qem Trable iker Nanage DFFLINE LOGOUT 173 goipE 1239 Grow node dest a Eraile UPFLTHE LOGOUT li mips 1235 brqup mede 1egt Eral FPLIHE LOT 123 paipE 12305 Croup mode jegt i Enable FPLLHE Liat 13 paipE LET Crop node isst i Erable OFFLINE Loom 1 3 LH iaw sd Weise 0 Een le OFTLIME LOOT 124 goipd IND 0 Grow neis graupl 1 lest Erable DFTLIME ocn 174 goipd 130 Pinel mode 1 lest Enable OF FLOM LOGOUT 12d gaiph a rk Fixed mole 1 jest Erale DPFLIME LOGOUT 139 gotpt 1 45 Firei mie l qeet Erable 3 Data Manage Data Manage Data Backup Data Import 3 1 System Parameters Management oystem Settings Status of Scheduler icc Simbank Server Name Default m7 Lu banus simplified Chinese Modify Cancel Status of Scheduler Displays whether the background processes smb_ scheduler and xchanged run normally and it is normal while On is shown Default Language select Chinese or English 3 2 Data Maintenance back up and restore data 3 2 1 Data Backup the data in mysql data
21. the system login interface default user name admin password admin The management interface is shown in figure Hain page Logout uv hor User Mame admin Permissions Super ET ans ii Eis Configuration z PIP verzion 5 1 6 Harimo upload lindt icm I Cup A ee A SIN Pank Server meesmre Apacha 7 2 3 Cents Cookle test SlXCBSS GolF Boni tor SIE Slots Golf Chanrelz Data Lanape Svetem Karage lata Backup lata Import User Tanage Change Password Flanags Other Usare The working process of Remote SIM 1s as follows both the GoIP line and SIM Bank Slot are registered on the SIM Server and then the SIM Server will bind one GoIP line with one SIM Slot according to the settings so that the GoIP module may make the operators be registered through the communication between the server and the SIM Card in SIM Slot In this way the line may run normally GoIP line SIM SLot binding approaches are broken down into two modes The first 1s the manually fixed mode the user can specify the binding between a certain SIM Slot and a specific GoIP line and it will not change once the binding has been done see 1 1 2 2 Modify Slot Parameters and 1 2 2 2 Modify GoIP Line Parameters The second is the group scheduling mode the user creates a scheduling group and places the SIM Slot and GoIP line which are need to be bound together into the group in which the cross dynamic binding is conducted by system in accordance with the group sc
Download Pdf Manuals
Related Search