Solarpod Pro 1000 User Manual
Contents
1. direct sunlight to prevent overheating misuse or abuse or the incorrect installation or operation of the product Section 3 PARTS IDENTIFICATION AC Power Button Battery Capacity Charge Rate Red LED Blue LEDS Yellow LEDS Power Button op Display amp Controls Double USB NS FY Port 1000 wr O sm aa wr O wom E m m AC o t Output gee t Front Output Side AC Fuse gt Green LED DC 12V Output jy 4 DC Fuse DC Charge a a Input Back Input Side Section 4 CHARGING Fully charge before first use For maximum efficiency charge after each use or every 2 months if it is being stored Failure to properly charge as listed below could damage the unit and affect performance CAUTION ONLY USE CHARGERS PROVIDED WITH THE SOLARPOD PRO 1000 OR DAMAGE MAY OCCUR Charging Indicator Indicates Charging Rate 1 Five yellow LEDs represent the charging rate when using any of the methods of charging below 2 Each yellow LED equals approximately 20 charge rate This will help you to position a solar panel in the best angle to the sun If the Solarpod Pro 1000 is plugged into a 100V 240VAC or 12V 24VDC power source all 5 LEDs should be illuminated Battery Indicator Indicates Battery Capacity Level 1 Five blue LEDs represents the c2. A Sunbird Group Corporation Ys Sunbird Solar Ltd ZY sunbira sotar rta A Sunbird Group Corporation solarpod pro 1000 by Sunbird Solar PORTABLE SOLAR GENERATOR USER MANUAL Solarpod Pro 1000 User Manual RevUK130924 For Model 04 SP1000 09 Sunbird Solar Solarpod Pro 1000 is a remarkably light 16 5kg 36 3lb portable power center with a full 960 watt hours of rechargeable power to bring portable energy to your home office or job Solarpod Pro 1000 by Sunbird Solar site Whether as a backup power supply for areas experiencing power outages due to natural disaster or as a mobile generator for a campsite the Solarpod Pro 1000 powers your world Charge it from available electricity or operate self sufficiently using one of the Sunbird Solar Ltd Solar Panels No set up is required just plug in and go Includes an AC charger and a cable to connect directly to a solar panel The internal LiFePO battery and energy management system is the one most advanced on the market with a long life cycle and reliable performance Section 1 IMPORTANT WARNINGS AND SAFEGUARDS Read all instructions thoroughly before operating this unit to avoid injury to self or property and avoid damage to the unit Keep instructions handy for reference during use DANGER CAUTION Section 2 WARRANTY Solarpod Pro 1000 is only serviceable by an authorized repair facility Do not dismantle Warranty is void i
3. AC power button is on and the red light is on e Checkto make sure that the AC circuit protection fuse is not blown by removing the 6A 6 3A or 8A fuse housing cap and then removing the 6A 6 3A or 8A fuse Inspect the fuse and replace if needed with the same size fuse See Section 8 for AC fuse reference chart e Check the AC output socket for obstructions or other visible damage e Verify the device being charged is not damaged USB Output Fails e Check the battery indicator blue LED strip to see if the Solarpod Pro 1000 has sufficient battery charge available If not follow the charging steps previously described e Ensure the ON OFF power is on and the green light is on e Check the USB port for obstructions or other visible damage e Verify the device being charged is not damaged Section 8 TECHNICAL INFORMATION Input 100 240V 50 60Hz 300VA Output 29VDC 10A CE approved AC 230V 1000W Max Pure Sine Wave Inverter 40Ah 12V DC 12A 180W Max 40Ah Two Double USB 5V 2A 10W Max 40Ah Operating 32 F to 1132F Temperature 02C to 452C AC Wall Charger Rated Output Power amp hours 400 x 262 x 3257mm 16 5kg 36 3lb CE Low voltage directive 2006 95 EC Electromagnetic Compatibility directive 2004 108 EC SOLARPOD PRO 1000 CHARGING TIME from fully discharged Using 120 Watt Solar Panel 10 13 hours in full sunlight Using AC Wall Charger included OPERATING TIME Solarpod 240 USB Ou
4. el For technical support contact your local distributor or go to www sunbird solar com technical support for online technical support Section 7 TROUBLESHOOTING If our Solarpod Pro 1000 fails to operate as specified follow these troubleshooting steps to correct the issue If you still experience issues please contact your local distributor or go to www sunbird solar com technical support for online technical support Charging Issues e Ensure all cords are connected securely e Check power indicators on chargers and the Solarpod Pro 1000 to verify they are Operating e fusing a solar panel to charge ensure it is correctly positioned in direct sunlight e Check that the fuses on the Solarpod Pro 1000 have not blown 12V DC Output Fails e Check the battery indicator blue LED strip to see if the Solarpod Pro 1000 has sufficient battery charge available If not follow the charging steps previously described e Check to make sure that the 12V DC circuit protection fuse is not blown by removing the 12A fuse housing cap Inspect the fuse and replace if needed with the same size fuse e Check the 12V DC output socket for obstructions or other visible damage e Verify the device being charged is not damaged AC Output Fails e Check the battery indicator blue LED strip to see if the Solarpod Pro 1000 has sufficient battery charge available If not follow the charging steps previously described e Ensure the
5. et on back of unit 2 Turn head clockwise until the silver lock tab is at top and press lock tab toward unit 3 To unplug charging head follow the above steps in reverse order 1 Align Tabs 2 Turn Clockwise Section 5 OPERATING INSTRUCTIONS Once charged the Solarpod Pro 1000 is ready to use right out of the box No set up is required All outputs may be used simultaneously Check your device s specifications to make sure they are compatible with the Solarpod Pro 1000 ON OFF Button When on the switches surrounding LED light will turn green AC Power Button When on the switches surrounding LED light will turn red USB Operation e Turn the ON OFF BUTTON on e Plug in your device s USB power or charging cable e A combined 5V 2A maximum output is available between the two ports when fully charged e Disconnect and power off when not in use AC Operation max 1000W output e Press the AC power button to activate the inverter e Plugin your device s power or charging cable into the electrical AC socket e Disconnect and turn off the power when not in use e CAUTION CHECK CAREFULLY THAT THE VOLTAGE RATING OF YOUR APPLIANCE MATCHES THE VOLTAGE RATING OF THE Solarpod Pro 1000 UNIT YOU HAVE PURCHASED e CAUTION Using devices rated higher than 900 1000W and operated for more than 10 minutes may cause the Solarpod Pro 1000 to overheat and shut down Once it has cooled the circuit wil
6. f the device is opened by unauthorized personnel For technical support contact your local distributor or go to www sunbird solar com technical_support Registration for the limited warranty described on Sunbird Solar Ltd website can be completed by going online to www sunbird solar com warranty_registration This is the sole and exclusive warranty provided by Sunbird Solar Ltd In no event will Sunbird Solar Ltd be liable for any indirect or incidental damages or losses of any kind arising from or as a result of ENERGIZED EQUIPMENT ELECTRICAL SHOCK AND EXPLOSION HAZARDS Do Not submerge in liquid or operate in wet environments Device is not waterproof or water resistant Operate in dry environments only Do Not operate in flammable or explosive environments Do Not operate if the unit is damaged in any way including loose electronics or if charging cords are frayed and wires are exposed Do Not place foreign objects inside of the power outlets Do Not disassemble There are no user serviceable parts Contact manufacturer for all repairs Consult your physician before using with CPAP devices or other non life support medical equipment Administer close supervision when operating around children or persons with disabilities Do Not use any devices over 1000W for risk of damage to the inverter Do Not block the air inlets Not recommended for use or storage below 14 F 102C or above 1202F 492C If using above 1202F place out of
7. l reset and the Solarpod Pro 1000 will be operational again Advantages of a Pure Sine Wave Inverter e A pure sine wave inverter produces a nearly perfect sine wave output less than 3 total harmonic distortion that is essentially identical to utility supplied grid power Eliminates electrical interference overheating and noise e Computer crashes and other appliance operational glitches can be avoided e inductive loads such as variable speed motors and microwave ovens can be used and supports in running them quieter and cooler e Some appliances and sensitive electronics will simply not work properly without pure sine wave power Reduces audible and electrical noise in fans fluorescent lights magnetic circuit breakers and electronic gears 12V DC Operation Max 15A output e Turn the ON OFF BUTTON on e Plug in your 12V device s power or charging cable into the 12V Vehicle Socket e Neither power button need to be on e Disconnect and power off when not in use Section 6 CARE AND MAINTENANCE e Dust regularly with a clean dry cloth to prevent dust and dirt from building up on the vents and power inputs outputs Store in a clean dry place when not in use e Charge after each use every 30 60 days and before storing so it is ready to use when needed e Solarpod Pro 1000 is only serviceable by an authorized repair facility Do not dismantle Warranty is void if the device is opened by unauthorized personn
8. tput Port sacos 12V Output Por E RE AC Inverter Outlet a a iPhone is a trademark of Apple Inc Android is a trademark of Google Inc NOTE Data is approximated and based on the maximum power consumption SOLARPOD PRO 1000 Fuse Reference Chart 8 Amp Fuse Solarpod Pro 1000 230V 1000W Unit AC Fuse 6A 6 3A Amp Fuse 12V DC Output Fuse 12 Amp Fuse
9. urrent battery capacity 2 Each blue LED represents approximately 20 full Solar Charging recommended Sunbird Solar 120W Solar Panel 1 The Solarpod Pro 1000 has built in battery protection and does not require a solar charge controller 2 Place the solar panel in direct sun 3 Connect the solar charging cable included male pin tip to the DC IN port on the Solarpod Pro 1000 Connect the MC4 and tips to the solar panel 4 Adjust the solar panel so that it is directly facing the sun Charging will begin immediately and the yellow charging LED indicators will illuminate 5 To ensure full battery charge continue charging for 1 additional hour 6 To maximize battery cycle life disconnect when Solarpod Pro 1000 is fully charged AC Wall Charging Adapter Included 1 Connect the male pin tip of the AC Wall Charger into the DC IN port of the Solarpod Pro 1000 and then plug the other end into an electrical outlet 2 The charging indicator on the AC Wall Charger will illuminate red when charging is in process and green when the Solarpod Pro 1000 has reached a full charge 3 The yellow charging LED indicators will also illuminate 4 To ensure full battery charge continue charging for 1 additional hour after Solarpod Pro 1000 is fully charged 5 There is no need to disconnect AC Wall Charger when charging is complete Connecting Charging Lines to the Solarpod Pro 1000 1 Align head tabs with DC IN sock
Download Pdf Manuals
Related Search