Bend3r Operation Manual (pdf 1 MB)
Contents
1. sima 990908008 MANUAL DE INSTRUCCIONES ORIGINAL ORIGINAL USER GUIDE MANUEL ORIGINAL D UTILISATION MANUAL DE INSTRUCOES ORIGINAL URSPRUNGLICHES GEBRAUCHSANWEISUNG ORYGINALNA INSTRUKCJA OBS UGI MANUALE D ISTRUZIONI ORIGINALI BEND3R 30 BEND3R 36 COMB 3 0 C Albufiol par 250 Pol Ind Juncaril 18220 ALBOLOTE Granada ESPANA Telf 34 958 490 410 Fax 34 958 466 645 info simasa com www simasa com ENGLISH DECLARATION OF CONFORMITY SIMA S A Poligono Industrial J uncaril C Albunol Parcela 250 C P 18220 Albolote Granada SPAIN Company responsible for manufacturing and commercialising the below specified machine BENDING STEEL BARS BENDING AND CUTTING MACHINE DECLARES That the already mentioned machine designed for bending and cutting flat and reinforced steel bars for use in the structure and other construction components is in conformity with all applicable provisions of the Directive of Machines 2006 42 CE and the national applicable regulations The machine is also in conformity with EC applicable provisions 2006 95 2004 108 CE 2000 14 2002 44 2002 95 CE 2002 96 CE The machine is also in conformity with the provisions of the following applicable norms UNE EN 292 1 UNE EN 292 2 UNE EN 294 UNE EN 3492. 7 5 STARTI NG UP AND USING THE MACHINE 8 6 PLUGGING THE MACHINE TO THE ELECTRICITY 8 7 BENDING WITH BOLTS AND MANDRI LLS 9 SE USE OF THE BENDING SQUARE aaa 9 BENDING WITH BOLTS AND MANDRI LES naa a Da 10 9 SPECLAL ACCESSORU ES a 10 10 MAINTENANCE INSPECTION AND CONTROL 10 16 CHANGING AND TIGHTENING THE BA a a NEK KN 11 10 2 BLADES SUBSTITUTION COMB3R MODELS 11 11 SOLUTIONS TO FREQUENT ANOMALI ES 12 12 TECNI CAL CARACTERI STI CS Kaga EEN 13 LZ BENDING AAG AA Os 13 13 SAFETY 13 14 ELECTRICAL SCHEMES 15 WARRANTY 18 16 ACCOUSTI CAL NOISE DECLARATION aaa a aaa aa 18 17 DECLARATIONS MECHANIAL VIBRATIONS 18 LS SPARE BART aaa iaa 18 19 ENVIRONMENT PROTECTION sasana aaa aiia daa aaa a aa aga aaa a aa aa aa 16 WARRANTY CERTIFICATE aaa aa aaa aa aka aan Na 26 Ka kaa a 2 a 22 ENGLISH 1 GENERAL INFORMATION WARNING Pease read and understand perfectly the present instruction before using the machine SIMA S A thanks you for your trust in our products and for purchasing the BENDING OR COMBINED ELECTRICAL CUTTING BENDING MACHIN
3. Prohibit strangers to access the place of work of the machine Work clothes are not supposed to have loose articles that can cling into movable parts of the machine 13 ENGLISH When you have to move the machine unplug the electricity cables and block the moving parts of the machine e Always keep protection elements and the safety guards in their correct positions e Attention Before placing the bolts mandrills and the bending squares check the direction of rotation of the bending plate You can then install the suitable accessories for the type of work you want to make e The damaged electrical cables should be urgently replaced e Unplug the machine from the electricity and never manipulate nor operate on the mechanical nor electrical elements of the machine while the engine is on e Never use the machine for purposes other that those it has been designed for VERY IMPORTANT Always use earth plug before starting up the machine e Use normalised cables e Make sure the feeding voltage is in accordance with the voltage indicated in the adhesive label on the machine e Make sure that the extension cords are not in contact with points of high temperature oil water sharp edges Also avoid trampling or crushing the cables by passing vehicles and do not put any objects on the machine e Do not use high pressure water to clean circuits or electrical elements ATTENTION You are to follow all safety recommendations menti
4. UNE EN 60204 1 UNE EN 1050 UNE EN 953 Details of the authorized person to elaborate the technical file Eugenio Fernandez Martin Technical Department Manager SIMA S A Poligono Industrial J uncaril C Albunol Parcela 250 18220 Albolote Granada SPAIN Albolote 01 01 2010 s Signed Javier Garc a Marina Managing Director ima ENGLISH INDEX CE DECLARATION OF CONFORMITY 3 1 GENERAL INFORMATION a a aki 5 2 GENERAL DESCRIPTION OF THE MACHINE 5 2 TRANSPORT tween hiss 6 2 2 PICTOGRAMS 6 3 ASSEMBLING 1 5 aaa a aa a ajaa aa Bala a a 6 5 DELIVERY CONDITIONS a aa b aa ag ad a 6 32 ACCESSORIES ASSEMBLING RSS Ka 7 4 MAIN PARTS OF THE MACHINE 2 ua aaa a aaa aaa aa a aa BEG a 7 HL CONTROL PANNE saba nja Naah saa CERG a ah ad aaa ak aa aaa a aa Ba e 7 2 PAR bo OFTARE PLATE a AA Ba aia aaa a 7 4 3 ANGLE INVERSION AND SELECTION PIVOT Da Da pae
5. 36 MOTOR POWER 2 2Kw 3Kw 3Kw 230v 400v 230v 400v 230v 400 TENTION MOTOR 50Hz 50Hz 50Hz MOTOR R P M 1500r p m 1500r p m 1500r p m NET WEI GHT 292 Kg 348 Kg 427 Kg 998x880X1078 927x841x1071 927x1056x1071 LxAxH mm PLATE R P M 12 10 10 REDUCER CAPACITY 4 2 1 8 L 8 L 12 1 BENDI NG CAPACITY R Nimm 450 aod A a A i ee al al BEND3R 30 230 024 018 02 BEND3R 52 052 03 R N mm 250 _ R N mm 480 _ R N mm 650 R N mm 450 N mm 650 850 COMB3R 30 36 630 O20 0 16 636 O26 22 O25 G18 14 632 S24 O18 G25 6 13 SAFETY RECOMMENDATIONS Bending and combined bending cutting machines be used by trained people or people familiarized with their operation Before starting up the machine please read the instructions and make sure safety norms are respected Learn how to stop the machine in a fast and safe way Place the machine on a plane surface Connect the machine to the electricity only when you are sure of its stability Start the machine only when you have mounted the safety guards that come with the machine It is recommended to use safety glasses safety boots gloves etc Please always use approved materials Always use Individual Protection Equipment IPE in accordance with the type of work you are effectuating
6. E This manual provides you with the necessary instructions to start use maintain and in your case repair of the present machine All aspects as far as the safety and health of the users is concerned have been stated Respecting all instructions and recommendations guarantees safety and low maintenance As such reading this manual carefully is compulsory for any person responsible for the use maintenance or repair of this machine It is recommended to have always this manual in an easily accessible place where the machine is being used 2 GENERAL DESCRIPTION OF THE MACHINE e The BEND3R models have been manufactured to bend flat and reinforced steel bars used for construction and passive steel armatures for structural concrete The bending operation is done in cold using mandrills to guarantee the bending interior diameter is conforming to the European norms e combined machines bending cutting models COMB3R are designed to bend as well as cut steel bars The cutting tools are two blades one fixed and one moving The cutting operation is done manually by pushing the bar on the roller dropping the bar into the cutting throat lowering the protection guard and pressing the pedal Any other use of this machine is considered inadequate and can be dangerous Thus this is utterly prohibited e The machine is equipped with an electrical auto ventilated motor brake e The reducer is the main element of the machine It is responsible fo
7. Fig 16 lo ust enough for the motor to be displaced 4 Depending on what we want to do tighten or change the belt we have to deal with the tightening screws B Fig 16 in a sense or the other When tightening make sure all belts have the same tension 5 Once the belts have been tensed you can fasten back the screws A Fig 16 10 2 BLADES SUBSTITUTION MODELS If any of the cutting blades is damaged replace them as to the following procedure 17 1 CHANGING THE FIXED BLADE Make sure the machine is unplugged from electricity Lift the safety guard off the blades Afterwards remove the screws and rotate the blade for a new cutting session or substitute it with a new blade if necessary 2 CHANGING THE MOVEABLE BLADE To change this blade it is necessary that the connecting rod is displaces outside its housing Operate in the following way with the machine switched on and the inversion pivot of the bending plate removed from its position press the pedal and observe the movement of the blade When we see that the blade is outside its housing we depress the pedal Right after we unplug the machine from the electricity to avoid any accident In this way we can reach the screws that fix the blade Remove the screws of the blade for a new cutting or substitute it with a new blade if necessary 11 ENGLISH 11 SOLUTIONS TO FREQUENT ANOMALIES ANONMALY POSSI BLE CAUSE SOLUTION Loose or damaged belts Tighten o
8. TROL 1 First oil change at 500 hours of use if it is mineral subsequently at the end of 2000 5000 hours of work or three years regardless of the hours of operation of the machine or at the end of 20 000 hours in case of synthetic oil 2 Lubricate weekly with calcium grease the holes where the bolts are housed and the bottom of the bolt to avoid corrosion 3 At the end of each day unplug the machine 4 the machine is not covered wrap it with an impermeable cloth 5 When necessary remove the remains of material that have fallen inside the machine 6 Regularly clean the visible parts and grease the holes in the table bending plate and bolts ATENCION before performing any maintenance or cleaning operations the electricity cable should be unplugged 10 ENGLISH TABLE OF EQUIVALENCE OF OILS AS PER MANUFACTURER MANUFACTURER TYPE OF OIL CEPSA HP 460 REPSOL SUPER TAURO 460 ESSO SPARTAN EP 460 MOBIL MOBIL GEAR 634 SHELL OMALA 460 10 1 CHANGING AND TIGHTENING THE BELTS The machines leave the factory with the belts perfectly tightened It is posible that alter the installation of the machine and alter using for a long time the belts get loose To tighten back the belt or replace it please consider the following steps Fig 16 1 Make sure the machine is unplugged from the power supply 2 Remove the back and front doors of the frame of the machine Loosen with a key the four screws
9. al to or lower than 16mm To make a sample proceed as follows bending by the extreme right of the operator 1 Plug the machine to the electricity 2 Place the bending blade rotation direction selector in the adequate position Clockwise Check the angle and the rotation direction with the inversion pivot before mounting any accessories on the table to avoid accidents 3 Mount the bending square in the right ruler of the machine on a bolt E Fig 10 4 Place a second bolt to serve as a support of the bending square B2 Fig 10 5 Insert the thrust bolt and the cap in the hole of the bending plate 1 B3 Fig 10 6 Insert another bolt in the centre of the plate and a chuck to obtain the desired ratio B4 Fig 10 7 Introduce the bar and press the pedal to obtain the selected angle ENGLISH 8 1 BENDING WITH BOLTS AND MANDRILLS To bend bar with diameter greater than 16mm use the bolts and mandrills system in stead of the bending Square TO make a sample proceed as follows 1 Plug the machine to the electricity 2 Place the selector in the adequate rotation position clockwise to make the bar entry on the right side of the machine Check the angle with the inversion pivot before mounting any accessories on the table 3 Place in the centre of the plate the central bolt and the appropriate mandrill for the ratio we want to obtain B1 Lot 4 Place the thrust bolt and mandrill B2 Lot 5 Place th
10. e support bolt over the chuck to support the bar so as to be as linear as possible B3 Lot 6 Introduce the bar press the pedal and get the result If the angle obtained is not the desired one we will have to change the place of the inversion pivot or spin the wheel P Lot moving the ruler forward to get finer angle 9 SPECIAL ACCESSORIES The bending machines come with optional accessories designed for the implementation of various functions such as 1 STERRUPS DEVICE This device has been designed to make stirrups with an inferior ratio thanks to its Special bolt Fig 12 A ruler has also been incorporated Fig 12 with two caps 1 T2 Fig 12 to make stirrups on measurement 2 SPIRALS DEVICE This device has been designed to make stirrups in spiral forms We can introduce bars from 6 to 20mm easy to adjust A Fig 13 The spiral diameter is also adjustable Fig 13 with a maximum diameter capacity of 5 m The spiral pass is another point that can be adjusted C Fig 13 3 BIG RATIOS DEVICE This device has been designed to bend bars with a ratio in conformity with the European bending norms It is compound of a number of accessories and mandrills a minimal ratio specific for each bar diameter Fig 14 4 ENTRANCE ROLLERS KIT This kit has been designed to make it easy to slip the bars and protect the working tale from premature wear out that can be caused by rubbing the bar 10 MAINTENANCE INSPECTION AND CON
11. ending squares 4x wheels 4x dispatchers R 1 x Extender 1 x Operator manual with warranty 2x wheels axis ENGLISH 36 30 36 1 x Safeguard for the bending plate I x pedal to operate the machine 3 x mandrills 1 x mandrill 1 x mandrill 1 x mandrill bolts 1 x bending square 4x wheels 1 x Extenders 1 x instruction manual and warranty 3 2 ACCESSORIES ASSEMBLING For transport reasons the plate safety guard P Fig 3 and the wheels kit Fig 3 1 are disassembled Before using the machine the plate safety guard should be mounted The latter presses a security micro switch M Fig 3 In the counter case the machine would not start 4 MAIN PARTS OF THE MACHINE 4 1 CONTROL PANNEL We will describe in Fig 4 the functionality of each of the knobs switches mechanisms and controls of the machine 1 Bending plate direction Selector It selects the direction of the rotation of the bending plate 2 Yellow Knob It is used when we rose up the foot from the pedal or press any emergency stop in case accidents or errors and we want the bending plate back to its point of origin 3 Green pilot The ignited pilot indicates that the machine has got tension and has selected a sense of rotation 4 Emergency stop It is used to stop the machine in case of emergency 5 Angle adjustment wheel It is used to regulate the accuracy of the a
12. lity in the repairs or the faulty equipment for a period of ONE year from the original date of purchase The date of purchase must appear on the warranty voucher enclosed 2 The warranty covers exclusively labour repair and substitution of the faulty parts the model and serial number of which must show on the warranty certificate 3 Transport stay and food expenses before arriving to SIMA S A will be covered by the client 4 The warranty does not cover any damage caused by the normal wear undue usage overloading inadequate installation or bad conservation of the machine 5 All repairs under WARRANTY will solely be effectuated by SIMA S A or by its authorised dealers or repair centres 6 This Guarantee will be invalid in the following cases a Any Warranty certificate manipulation or modification b Repairs modifications or substitution of any part of the machine by unauthorized parties by SIMA S A technical department c The non approved installation of devices by SIMA S A technical department 7 SIMA is not responsible for any damages caused by the failure of the product This includes but not limited to annoyances transport expenses telephone calls and loss of personal goods or commercial benefits as well as the loss of pay or salary 8 Faulty thermal or electrical motors under warranty have to be sent to SIMA S A or its authorized technical service in the country 9 To be benefit from the warranty the warra
13. magneto thermal switch and a differential in accordance with the characteristics of the motor 2 2Kw 3 CV three phase at 400 15 magneto thermal 15A 300mA differential 2 2Kw 3 CV three phase at 230 20 magneto thermal 20A 300mA differential 3Kw 4 CV three phase at 400V 15A magneto thermal and 15A 300mA differential 3Kw 4 CV three phase at 230V 20A magneto thermal and 20A 300mA differential The machine electrical tension is visible on the voltage indication next to the top of engine terminals and on the machine characteristics plate WARNING Do not plug the machine to the electricity if you are not sure of the available electrical tension If the tension is not correct the engine will undergo irreparable harm or out of service WARNING Never manipulate the power cables or any electrical equipment of the machine if you have not totally unplugged the machine from the electricity IMPORTANT It is appropriate to change the position of the bridge plates in the engine terminals It is also important to change the adhesive labels indicating the voltage to reflect the change made ENGLISH oP OTHE TH rne Fak PAPA TEA 1 1 HAT EINE 7 BENDING WITH BOLTS AND MANDRI LLS To perform a 902 clockwise bending we need to place the selector in the position of the wanted rotation Afterwards we insert the pivot P Fig 8 in the plate forming a fictitious 902 angle with
14. ne is equipped with wheels to facilitate their movement The machine is painted in oven with a highly resistance anti corrosion epoxy polyester paint e The original electrical equipment is in conformity with the EC safety norms e The model is supplied with a cutting jaw with a safety metal guard connected to an electrical protection system When this safety guard 15 lifted the machine stops working ENGLISH 2 1 TRANSPORT For a safe transport of the machine please follow the following instructions The Bending and Combined machines are fitted with wheels for easy displacement They also have holes in the working table to be lifted with cranes through chains or cables The used means of transport must be safe Fig A IMPORTANT During the transport of the machine the latter should never be reversed nor be put on either side The machine is only to rest on its four feet 2 2 PICTOGRAMS Pictograms included in the machine entail the following USE HELMET AND EYE AND AUDITIVE READ INSTRUCTIONS PROTECTION MANUAL USE SAFETY GLOVES USE SAFETY BOOTS 3 ASSEMBLING INSTRUCCIONS 3 1 DELIVERY CONDITIONS SIMA bending and cutting machines are delivered individually packed on a reinforced pallet The following items are sent together with the machine BEND3R 30 I x safety guard for the bending plate I x pedal to operate the machine mandrills 01 1x mandrill 4x bolts g36mm 1 b
15. ngle that we cannot get with the plate pivot Its function is also to advance or retreat the bar mandrill support 6 Pedal It is used to confirm the bending plate rotation when it has been intentionally pressed Fig 5 7 Tension Entry Electrical tension entry to the machine 8 Red Pilot It indicates the activation of the safety protection by overheating or short circuit in the motor or control panel 4 2 PARTS OF THE PLATE The bending plate has 3 holes to insert the thrust bolt Hole 1 is used with the spirals device Hole 2 is used to bend rods equal or smaller than 16mm diameter with the bolts and mandrels system Hole 3 is used to bend rods greater than 16mm diameter with the bolts and mandrels system Threaded holes 4 serve as fans to extract and dismantle the plate Fig 6 NOTE In rebar processing the bar thrust must always be done with a mandrill put the bolt Fig 7 4 3 ANGLE INVERSION AND SELECTION PIVOT The inversion pivot Fig B It is used to select the plate rotation angle Depending on the rotation direction of the plate that we choose we have to insert the pivot in different sectors ENGLISH 5 STARTING UP AND USING THE MACHINE ATENTION All safety recommendations must be followed either the ones mentioned in the present user manual or those complying with all labour risks prevention norms in every location WHEELWORK SIMA bending and combined machines do not need any wheelwork operations as they are
16. nty certificate must be at SIMA S A premises within 30 days from the purchasing date To claim the warranty the purchase invoice has to be attached stamped by the dealer including the serial number of the machine SOCIEDAD INDUSTRIAL DE MAQUINARIA ANDALUZA S A POL IND JUNCARIL C ALBU OL PARC 250 18220 ALBOLOTE GRANADA Tel 34 958 49 04 10 Fax 34 958 46 66 45 MANUFFACTRURER OF LIGHT MACHINERY FOR CONSTRUCTION SPAIN ENGLISH WARRANTY CERTIFICATE AFTER SALES SERVICE FORM TO RETURN TO MANUFACTRURER eae a a a a a a a ee ee mg DATOS MAQUINA NUMBER PLATE DATOS COMPRADOR NAME ADDRESS POSTAL CODE AND CITY PROVINCE COUNTRY TEL Fax E mail DATE OF PURCHASE Signature and stamp of the selling party Client signature WARRANTY CONDITIONS 1 SIMA S A fully guarantees all its products against defects in design taking responsibility in the repairs or the faulty equipment for a period of ONE year from the original date of purchase The date of purchase must appear on the warranty voucher enclosed 2 The warranty covers exclusively labour repair and substitution of the faulty parts the model and serial number of which must show on the warranty certificate 3 Transport stay and food expenses before arriving to SIMA S A will be covered by the client 4 The warranty does not cover any damage caused by the normal wear undue usage o
17. oned in the present user manual and comply with all labour risks prevention norms in every location SIMA S A is not responsible for the consequences possibly generated but the inadequate use of the bending or the combined bending cutting machine 14 ENGLISH 14 ELECTRICAL SCHEMES 61 1 mE ee ee BEND3R 52 C2 Al vo BEND3R COMB3R 15 ENGLISH BEND3R 37 16 ENGLISH OV 24 24 _ OV V1 1 53 54 14 230 400 V 13 53 C2 54 14 17 ENGLISH 15 WARRANTY SIMA S A the manufacturer of light machinery for construction possesses a net of technical services SERVI SIMA Repairs under warranty made by SERVI SIMA are subject to some strict condition to guaranty a high quality and service SIMA 5 A guarantees all its products against any manufacturing defect to take into account the conditions stated the attached document WARRANTY CONDITIONS The latter would cease in case of failure to comply with the established payment terms SIMA S A reserves its right to bring modifications and changes to its products without prior notice 16 ACCOUSTICAL NOISE DECLARATION These are the acoustic levels emitted by the MACHINE is inferior to 70 dB A 17 DECLARATIONS ON MECHANIAL VIBRATIONS The machine does not generate any mechanical vibrations that presen
18. pping course end and confirm its continuity 1 open 0 closed Substitute it in case of defect Revise electrical switchboard of the workplace Check there is tension in the workplace Check the network power tension of the workplace and its connections Reactivate the circuit breaker Check the state and connection of the cables Check all phases of the machine are connected Control the high tension fuses of the machine electrical switchboard Unblock emergency Make sure all safety devices of doors guards emergency are operational Wait until the engine has cooled down and switch on the circuit breaker Check installation Check out of the emission stream If the voltage is less than 230V the machine does not work A tension stabilizer is then recommended Check the locks and substitute them in case they are defect Check the end of course and its continuity 1 open closed Substitute it in case of defect Check the electro break and adjust it tightening the springs and leaving an evenly Light of 0 30 0 40 mm between disk and block using graduate gauges for this adjustment Substitute the disk block Dismount the reducer block and verify the bearings and gears substitute all that is defect Control where the noise comes from discount the motor and proceed with its repair ENGLISH 12 TECNICAL CARACTERISTICS DETAILS BEND3R 30 BEND3R 36 COMB3R 30
19. r substitute belts Damaged blades Change the cutting face or substitute it Power drop in motor Let the motor be revised by technical service Cutting bending power insufficient The bending plate turns but only stops after touching the course end Faulty tension the machine the pilot lamp indicating the state of energy does not ignite The pilot lamp indicating the state of energy but the machine does not function Pilot lamp red ignited Connection to 230V The connection is regular but the machine does not have enough strength Oil leaking from the lower part of the reducer During the recession after the bending the plate does not stop at the starting point The bending plate does not instantly stop at the end of each manoeuvre Strange noises in the reducer block Strange noise in the motor Defect end of course Faulty tension in the energy supply board Defect electrical connection Disconnection of the manoeuvre circuit breaker The conducting electrical cable is in a bad state The machine is not well connected Emergency blocked Safety electrical elements deactivated Over heating of the engine Circuits cut in the engine fazes Tension unstable Deteriorated or damaged locks Defect course end Electro break misadjusted by wearing out Disk of the electro break worn out Interior deterioration of some elements Some motor components breakdown Check the sto
20. r transmitting the needed energy to carry out the steel bars bending e The machine is operated by an electrical motor that passes the movement by a transmission to the bending mechanism in which the different mandrills are mounted e The bending plate can be selected to work in two different senses left or right by changing the direction of rotation in the electrical control panel e The bending angle can be decided by inserting the pivot the bending plate For a more precise bending the ruler can be accurately adjusted by its handle The control panel is endowed with polyester electrical knobs easily identified by pictograms e The machine is equipped with shutdown and backward movement buttons to facilitate its manoeuvre The emergency knobs on both sides of the machine can be used in case of danger or incorrect manoeuvres e The general bars bending manoeuvre is performed in low voltage 24V according to the European standards e The original equipment bolts mandrels bending square are heat treated to withstand the tough type of work the machine performs e The machine is furnished with a pedal to confirm and execute the manoeuvre thus avoiding the upper parts to be trapped while the machine is running e The work area is protected by a safety guard to limit possible accidents This guard is transparent to allow observing the material being bended avoiding getting to the upper parts of the bending area e The machi
21. specially designed to obtain the maximum performance from start NORMAL USE OF THE MACHINE The Bending and combined machines have been designed for bending and cutting flat and reinforced steel bars for use in the structure and other construction components is in conformity with all applicable provisions of the Directive of Machines 98 37 CE and the national applicable regulations Each other use that has not been expressively indicated is considered abnormal Any tool or accessory added or amended without written authorization from the manufacturer is considered inappropriate and dangerous If any damage or injury is caused as a result thereof or by misuse of the machine SIMA S A exempts all responsibility as manufacturer The machine must be installed on a plane firm and horizontal surface and the ground should not be soft This machine DOES NOT HAVE BE USED UNDER THE RAIN ALWAYS WORK IN WELL I LLUMI I NATED AREAS 6 PLUGGING THE MACHINE TO THE ELECTRICITY The extension cable used to feed the machine needs to have a minimum section of 4x2 5 up to 25 meters long For a superior distance 4x4 mm2 can be used In of its ends it is needed to connect a base normalised aerial of 3P T or 3P N T compatible with the machine switch and in the other end one normalised aerial pin of 3P T 6 3P N T compatible with switchboard exit Machines with electrical motor should always be connected to a normalised switchboard that disposes of a
22. t health and workers safety risks 18 SPARE PARTS The spare parts for the bending and combined machines manufactured by SIMA S A are to be found in the Spare parts plan attached to this manual To order any spare part please contact our alter sales service clearly indicating the serial number of the machine model manufacturing number and year of manufacturing that show on the characteristics plate 19 ENVIRONMENT PROTECTION Raw materials have to be collected instead of throwing away residuals Instruments accessories fluids and packages have to be sent into specific places for ecological reutilisation Plastic components are marked for selective recycling R A E E Residuals arising of electrical and electronic instruments have to be stored into specific places for selective collection 18 ENGLISH ES 19 ENGLISH 2220 ENGLISH ee aia ka 2 Bi CT A 21 ENGLISH WARRANTY CERTIFICATE AFTER SALES SERVICE END USER FORM MACHINE DETAILS 7 NUMBER PLATE CLIENT DETAILS ANE ADDRESS POSTAL CODE AND CITY PROVINCE COUNTRY TEL Fax E mail DATE OF PURCHASE Signature and stamp of the selling party Client signature WARRANTY CONDITI ONS 1 SIMA S A fully guarantees all its products against defects in design taking responsibi
23. the end of course F1 responsible for reversing the plate rotation Then we press the pedal and watch the plate rotation the pivot contact with the micro and the plate goes back to its origin to make contact with the micro F2 which is responsible for stopping the regression rotation NOTA It is convenient to perform various angles before bending any bars so as to have a good command of the machine To perform a 902 counter clockwise bending we need to place the selector in the position of the wanted rotation Afterwards we insert the pivot P Fig 9 in the plate forming a fictitious 902 angle with the end of course F1 responsible for reversing the plate rotation Then we press the pedal and watch the plate rotation the pivot contact with the micro and the plate goes back to its origin to make contact with the micro F2 which is responsible for stopping the regression rotation NOTA It is convenient to perform various angles before bending any bars so as to have a good command of the machine NOTA Depending on the diameter of the bar to be bended and its hardness we have to find the adequate sector to place the inversion pivot If you do not get the desired angle with the inversion pivot you will have to refine the accuracy of the angle with the ruler adjusting wheel P Lot As such you regulate the bar support angle influencing the angle to make 8 USE OF THE BENDING SQUARE The bending square is used to bend bars with diameter equ
24. verloading inadequate installation or bad conservation of the machine 5 All repairs under WARRANTY will solely be effectuated by SIMA S A or by its authorised dealers or repair centres 6 This Guarantee will be invalid in the following cases a Any Warranty certificate manipulation or modification b Repairs modifications or substitution of any part of the machine by unauthorized parties by SIMA S A technical department c The non approved installation of devices by SIMA S A technical department 7 SIMA is not responsible for any damages caused by the failure of the product This includes but not limited to annoyances transport expenses telephone calls and loss of personal goods or commercial benefits as well as the loss of pay or salary 8 Faulty thermal or electrical motors under warranty have to be sent to SIMA S A or its authorized technical service in the country 9 To be benefit from the warranty the warranty certificate must be at SIMA S A premises within 30 days from the purchasing date To claim the warranty the purchase invoice has to be attached stamped by the dealer including the serial number of the machine SOCIEDAD INDUSTRIAL DE MAQUINARIA ANDALUZA S A POL IND JUNCARIL C ALBUNOL PARC 250 18220 ALBOLOTE GRANADA on a TEL 34 958 49 04 10 Fax 34 958 46 66 45 MANUFFACTRURER OF LIGHT MACHINERY FOR CONSTRUCTION SPAIN E 24 ENGLI SH
Download Pdf Manuals
Related Search