Home

Technical Specification

1. 7 Press Back to return to the previous menu level Dial a Speed Dial entry 1 Press and hold the Speed Dial button 2 to 9 2 that holds the number you wish to dial 2 The display shows the amp icon and the number being dialled If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 23 Sounds The following sounds settings are for the handset see page 26 to change the base ringer volume and melody Handset ringer melody for external or internal calls 1 Press Meri scroll BR to Sour and press Ok 2 Finger is highlighted Press Gk 3 External is highlighted either press GE to select or scroll to Internal and then press Gk 4 Press E amp A or to select the melody you want and press Gk Handset ringer volume including ringer off 1 Press Meri scroll RR to Souri and press Ok 2 Finger is highlighted press OF 3 Scroll Sg to Rirser Volume and press OK 4 Scroll EAA or to select the volume level 1 5 or off and press Ok Set to quiet mode 1 Press Meri scroll ER to Sourc and press Ok 2 Firser is highlighted press GE 3 Scroll ER to cuiet mode and press Ok 4 Press SEN or to select Beer or Ott and press Ok Handset beeps 1 Press Meri scroll SM to Souri and press Ok 2 Scroll Reda to Tones Press OK 3 Keu Tome is highlighted press G amp or scroll REH to either Con rm Tone Batters Low or Gut Of Ronse and then
2. If the copying process is interrupted e g an incoming call or flat battery phonebook entries after this interruption will not be copied If the SIM you have inserted is PIN protected Femncwe SIM PIM will appear on the screen You must return the SIM to your mobile handset and remove the PIN protection before you can copy the SIM to your Diverse Memory Full If your phonebook memory becomes full the display shows Menors Full All entries stored up until the memory becomes full are kept in the phonebook WARNING While copying international format numbers prefixed by or 00 from SIM please make sure after SIM copy that entries stored in your Diverse are in the correct format You may have to manually edit the copied local national and international numbers before you can use them to make calls If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Copy SIM card entries to the phonebook 1 Insert the SIM card into the SIM card tray on the side of the base The SIM card should have the gold chip facing upwards 2 Press Hames Calls 4 3 If no phonebook entries are present scroll to SIM Cory and press ik If phonebook entries exist scroll EHA or ESH to any entry and press etiorns Scroll to SIM Cor and press OE 4 Select SIM to Phare and press OF 5 Alist of SIM entries is displayed 6 Select the entry you wish to copy to the
3. 2 If you have one other handset it will ring If you have extra handsets press EHA or to select the handset 1 5 you want then press Gk 3 When the other handset answers you can announce the call Press Car to join all callers If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 48 49 Help Phone does not work e Have you removed the pull tab and are the batteries installed correctly See page 6 e Check that the power is correctly connected No dial tone e Isthe telephone cord of the base plugged into the phone socket e Only use the telephone cord supplied with the phone e Check that the power is correctly connected Cannot dial out or receive calls e Check that the power is correctly connected e Isthe telephone line cord provided with the product plugged into the phone socket e The batteries may need recharging e Has there been a power cut If so place the handset back on the base for 10 seconds and try again If it still does not work disconnect the batteries and power for 10 minutes then reconnect and try again You have a dial tone but the phone will not dial out e If you are connected to a switchboard check whether you need to dial an access code Handset does not ring e The ringer volume may be switched off on the handset or the base see page 24 and 26 e Check that the power is correctly connected to the base e Make s
4. Stor or Pag to stop playback PR to cancel playback and return to standby 0 At the end of playback the handset will return to standby The messages are renumbered to take account of any deleted messages Delete all old messages 1 Press Heru Scroll ER to Ariswer Machine Press OF 2 Scroll RRS to Delete Msas and press OF If there are no old unplayed messages the display shows Ho Qld Messages If there are old messages the display shows Delete Old Messages Press Yes to confirm or He to cancel 3 Press Eack to return to the previous menu level Answering machine messages that are not deleted are automatically saved Memory full If the caller s still talking when the memory becomes full the caller hears Memory full thank you for calling and the machine will hang up You must delete messages before your machine will be able to record new ones To delete old played messages see opposite or page 39 for instructions If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 38 Using the answering machine at the base Switch on off 1 Press B The setting is announced and the display briefly displays Gir or OFF Message playback 1 Press EEZ New messages are played first During playback Delete to delete the current message uv 5 once to repeat the message u y ip twice to play the previous mes
5. This assumes that your Caller Display service is active and working on your line Messages sent to 00000 are free Further help and advice for text queries on BT lines e BT Residential customers call 151 choose option 2 when prompted by the Fault Management Service select option 2 enter your phone number on the handset and wait to speak to a customer adviser e BT Business Customers call 152 choose option 2 when prompted by the Fault Management Service select option 2 enter your phone number on the handset and wait to speak to a customer adviser e For other telephone service providers please contact their customer services If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 54 General sales enquiries e BT Residential lines call 150 BT Business lines call 152 e For non BT line customers call 0800 800 150 residential or 0800 800 152 business e Additional handsets are available from the Helpdesk on 0800 218 2182 Billing enquiries e Refer to the telephone number shown on your telephone bill Other functions and services available from the text messaging service By sending the following commands to the BT text self administration facility you can control functions and capabilities in your text phone and the way messages are handled 1 Press Heri Text is highlighted Press 0E 2 Write Messaae is highlighted Press Ok 3 Use th
6. alarm ringtone If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Calls list Caller Display If you have subscribed to a Caller Display Service you will be able to see your caller s number on your handset display provided it is not withheld prior to answering the call If your caller s name is stored in the phonebook and a number match is found you will see the caller s name and number on the display Calls list The calls list holds details of up to 30 received calls The date and time of the call is stored if available When the list is full and a new call is received the oldest entry will be deleted automatically The Calls list can hold numbers up to 24 digits and names up to 15 characters Unread missed calls are displayed with a a icon next to the caller s name or number Read missed calls have a icon next to the caller s number View call details Press E amp H the most recent entry is at the top of the list Press Een or to scroll through the list Press Grtions Details is highlighted Press Ok The display shows phone number date and time of the call Press E amp A or E amp H to display details about the next call play Oy Un ge aoe ie e Press Back to return to the previous menu level 30 IMPORTANT To use Caller Display you must first subscribe to the service from your network provider A quarterly fee may be pa
7. bt helpdesk vtecheurope com To unlock the keypad 1 Press and hold E The handset beeps and Kezrad Unlocked is displayed for 2 seconds before returning to the standby screen The j will disappear Find handset Paging Paging cannot be answered by a handset as a normal call You can ring a handset to help locate it g P The handset will ring even if the 1 Press and release GQ on the base All handsets registered to handset ringer has been turned off the base will ring for up to 60 seconds 2 Press on the base again to stop the ringing or press a button on any handset If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 17 Phonebook You can store up to 100 names and numbers in the phonebook Names can be up to 15 characters long and numbers up to 24 digits You must enter both a name and a number Store a name and number in the phonebook 1 From standby press the left soft key BE Hames The phonebook menu is displayed 2 Hen Entru is highlighted Press 0E Or if entries are already stored you will need to press to highlight Hen Ertra and then press Ok 3 Enter the name See the notes opposite for help Press Gk 4 Humber is displayed Enter the number Press Ck 5 Grower is displayed and the group ringtone melody is played you cannot change the ringtone at this stage to do so later see page 22 If you wish to add the entry
8. handset batteries are running out of charge more quickly This is a standard sign of wear and the batteries will need replacing 1 Slide open the battery compartment cover 2 Take out the old batteries and replace with 2x AAA NiMH 600mAh rechargeable batteries 3 Push the battery compartment cover back on until it clicks into place Replacing the base plinth If you ever remove the base plinth then follow this diagram re attach it WARNING Do not immerse batteries in water or throw them into a fire or dispose of them with ordinary domestic refuse BT accepts no responsibility for damage caused to your BT Diverse 7150 by using any other types of batteries There is a risk of explosion if incorrect batteries are fitted If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 56 Safety information e Only use the power supply suitable for the BT Diverse 7150 range Using an unauthorised power supply will invalidate your guarantee and may damage the telephone The item code for the base power supply is 048611 If you have purchased a Diverse additional handset the item code for the charger power supply is 048610 e Use only the approved rechargeable batteries supplied Spare rechargeable batteries are available from the BT Diverse 7150 Helpline on 0800 218 2182 e Do not open the handset except to replace the handset batteries or the base This could exp
9. on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 31 Delete an entry 1 Press Higa 2 Press E amp H or to scroll through the list to the entry you want 3 Press Grtions Scroll to Delete and press Ok Delete is displayed press es to confirm or Ha to cancel 4 Press Back to return to the previous menu level Delete entire Calls list 1 Press SR 2 Press Grtions Scroll to Delete All and press 0E 3 Delete All is displayed press t es to confirm or Ho to the previous menu level Voicemail 1 If you have subscribed to the BT Answer 1571 service you can press and hold to listen to your messages 2 The display shows Listen to Info Follow the spoken instructions if appropriate If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 32 BT Network Services By selecting the BT Services menu you can access a range of useful pre stored numbers and further BT Calling Features Pre stored BT Services numbers e Helpdesk e Check divert e BT 118500 directory enquiries e Call wait on e Divert on e Call wait off e Divert off e Check call wait BT Diverse 7150 Helpdesk 1 Press a short press only 2 Heledesk is highlighted Press Ho call BT 118500 Directory Enquiries 1 Press a short press only 2 Scroll ERS to ET 112566 and press SE call Call Divert on off check 1 Press a short press only 2 Scrol
10. text to be delivered as a normal telephone call which when answered will be an electronic Text to Speech message To overcome this problem you must keep one of the products as it is with the default Send amp Receive ending in a 9 but for the second and subsequent products you must change the final digit of the Service Centre numbers from the default 9 to any unique number between 1 and 8 i e for a second product change last digit from a 9 to a 1 by changing the Send number from 1470P17094009 to 1470P17094001 and the Receive number from 0800587529 to 0800587521 For the Send number go into Text Settings Send centre l and amend the last digit and then press Save For Rev Centre go into Text Settinas Rew Centre i and amend the last digit and then press Sawe Once changed for the products that you have assigned new send and receive numbers you need to send a new registration text to the Fixed Line Text Service platform to register the new identity i e send a text to 00000 from the product that you changed the Send amp Receive numbers You can then send and receive text messages from more than one product Text has previously been sent and received but you are now only receiving voice spoken text messages from number 0845 6021111 e This may be due to your line being de registered at the text service centre All you need to do is text Reset and send it to 00000 You will receive a confirmation message back
11. the Voice Mail service to answer after 7 or 10 rings and then set the Diverse 7150 Answer delay page 36 Answer Settings to answer at either 6 or 9 rings to ensure that the answer machine receives the message Cannot access your messages from another phone e Has Remote access been disabled To enable Remote access see page 39 No Caller Display number name displayed e Have you subscribed to a Caller Display service from your network provider see page 30 e The caller may have withheld their number e An exact name number match was not found in your phonebook Check that you have stored the full STD dialling code If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 51 Cannot register a handset to a base e You can register a total of 5 handsets to your BT Diverse 7150 base and you can register your BT Diverse 7150 handset to up to 4 bases Check that you have not exceeded the limits e Check that you have entered the correct system PIN number default PIN 0000 e Check that you are at least one metre away from other electrical equipment to avoid interference when registering Base unit does not ring but the lights are on e Have you connected the telephone line to the telephone wall socket correctly e You must use the telephone line cord supplied with the product otherwise the phone may not work e ls the base ringer set to off e You may have a fau
12. website at http www bt com terms Subscribe to the text messaging service When you send your first text message from your BT Diverse 7150 you will automatically be registered for the service On receipt of your first text through the service the system will send you a welcome text message back You may also register by sending the word Resister to 00000 upon which you will receive a confirmation message Cost of the fixed line service There is no subscription charge other than the subscription to Caller Display Visit the BT com website www bt com to find out how much it costs to send a text message depends upon your call package Sending messages Send a text message 1 Press Heru Text is displayed Press Gk 2 Write Messase is highlighted Press 0E 3 Use the keypad to enter your message Press Cle tions and scroll EOM or ERA to on Te ried Press iE Enter the phone number and press Serd 41 IMPORTANT You must subscribe to your Network Provider s Caller Display service so that you can use text messaging and you must not withhold your telephone number A quarterly fee may be payable please contact your network provider for more details You may also send messages to landline phones that are NOT text compatible Messages to non compatible lines will be connected to voice text and delivered in spoken words to the telephone as a call Please note that the conversion can translate commo
13. 0 handset can also be registered to up to four other bases You can then select the base you would prefer to use If you have purchased an additional handset you must register it to your BT Diverse 7150 base before it can be used The batteries must be fully charged for 24 hours before you register it You may be able to register other DECT handsets to your BT Diverse 7150 Compatibility of products may vary and the number of features available may be reduced in doing so Easy registration of a new additional Diverse handset To use easy registration a new handset must be used and the base must have the PIN code 0000 If the base PIN has been changed then the longer registration procedure on the following page will need to be followed 1 The display will show Flease Resister and once the handset has been fully charged for 24 hours press Fes left soft key 2 The display will show Fress and Hold Ease Find Key The button is located on the Diverse base underneath where the handset sits Press and hold the button on the base for approximately 8 seconds until the base beeps then release 3 Immediately press Gk on the handset to confirm The base will go into registration mode for 90 seconds and will beep when registration is successful The handset will automatically be assigned the next available handset number and registration is now complete Registration of handsets can only take place while the base is not engaged on anoth
14. 2 Scroll Rey to HS Settings and press OK 3 Scroll to De resister and press OK 4 5 Enter the 4 digit system PIN code default 0000 and press Ok Press EAMA or SUE to select the handset number you want to v de register and press Gk The display will show De resister Handset 7 Select either es to confirm or He to cancel Handset reset mn A A W N Press tern scroll to Settings and press OK Scroll to HS Settinas and press Ok Scroll Sia to eset Handset and press Ok Enter the 4 digit system PIN code default 0000 and press GE Display shows Reset Handset to Default Press Yes to confirm or He to cancel Base settings Base ringer melody and volume 1 Press Heri scroll to Settings and press Ok 2 Scroll ERA to BS Settiras Press OK 3 4 The Rinatone option is highlighted Press Gk then press Firvaer is highlighted Press Gk ey or to select the melody 1 5 and press Ok Scroll QE to Ringer Volume and press Gk Press ROM or to select the volume level 1 5 or off and press Ok Press Back to return to the previous menu 26 You cannot de register the handset you are using For information on changing the system PIN see page 27 Restore your handset to its original factory settings This will not affect e The phonebook e Text messages stored in the Inbox or Draftbox e The Calls list Choose from 5 base ringtones There are 5 volume levels and Off I
15. Delete is displayed Press es to confirm or Ho to cancel 4 Press Back to return to the standby screen Delete all redial numbers 1 Press Ea The last number dialled is displayed 2 Press Getions and scroll ERA to Delete All and press Ok 3 Delete All is displayed Press es to confirm or Ha to cancel 4 Display shows List Emets and returns to the standby screen Keypad lock You can lock the keypad so that it cannot be used accidentally while carrying it around To lock the keypad 1 Press and hold ED The handset beeps and Kewrad Locked is displayed for 2 seconds before returning to the standby screen The screen will show the ji icon 16 To view the details of the number press Or ticms Details is displayed press Ck Press Clear to delete any unwanted digits and then enter new ones using the keypad If the phonebook is full the display shows temors Full and the number will not be saved You will need to delete a number in the phonebook first see page 21 Call Groups available No Group General Family Business Friends Utilities VIP and Others WARNING If the keypad is locked you will still be able to dial the emergency numbers 999 and 112 When the keypad is locked you can still answer incoming calls and operate the handset as normal When the call is ended the keypad lock comes on again If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email
16. E or to the Speed Dial button you want button PXA to Ee and press Gk 4 Ifa name and number is already allocated to the Speed Dial button you have chosen they will be displayed To re use this Speed Dial button see Edit a Speed Dial entry on page 23 5 If the Speed Dial is empty Ho ruimnker is displayed and then the screen shows all your Phonebook entries Scroll EOM or ede to the entry you want to select and press Gk to save If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Call group names cannot exceed 10 characters 22 Delete a Speed Dial entry 1 Press Hames 2 Press 0etions and scroll RH to Seeed Dial and press 0E 3 Scroll or to select the Speed Dial button number you want to delete and press Ok 4 The name and number is displayed press Gr ticrs and scroll EA tO Delete 5 Press Gk to confirm Deleted is displayed 6 Press Eack to return to the previous menu level Edit a Speed Dial entry 1 Press Hames 2 Press Getions and scroll RMA to Seeed Dial and press OK 3 Scroll or to the Speed Dial button you want to edit and press Ok 4 The name and number is displayed press Gr tions and Edit is displayed 5 Press ik to confirm and then scroll or to the entry in the phonebook you want and press ik to save 6 This new name and number from the phonebook will replace the old name and number for this Speed Dial button
17. Think before you print This new interactive user guide lets you navigate easily through the pages and allows you to be directed straight to any websites or email addresses that are referenced Simply hover the cursor over the page number website or email reference and click when the a icon changes to the finn icon This User Guide provides you with all the Got everything information you need to get the most e BT Diverse 7150 handset from your phone e BT Diverse 7150 base j e 2x NiMH AAA Before you make your first call you will edhemeable bacis need to set up your phone Follow the already fitted simple instructions in Getting Started e Power adaptor on the next few pages or refer to the quick item code 048611 set up guide enclosed in the box if you haven t already done so e Telephone line cord e Base plinth already attached Need help If you have any problems setting up or using your BT Diverse 7150 please call the Helpline on 0800 218 2182 or email bt helpdesk vtecheurope com Our dedicated advisors are more likely to be able to help you than the retailer where you made your purchase Alternatively you may find the answer in the Help section at the back of this guide IMPORTANT Only use the power adaptor and telephone line cord supplied or this product may not work Hearing aid Please note that the BT Diverse 7150 works by sending radio signals between the base and handset Thes
18. ase see page 50 Time saver When you ring in to access your messages remotely if your answering machine is set to time saver and you have new messages it will answer after 10 seconds if you do not have any new messages it will answer after 20 seconds This means you can hang up knowing you have no new messages saving you time and the cost of the call Recording time Set the maximum message length 1 2 or 3 minutes or unlimited If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Switch the answering machine on off at pre set times 1 Press Meru Scroll ERS to Answer Machine Press OK Scroll RR to Answer Settinas and press Ok 2 3 Scroll RR to Timed Answer Sus and press OE 4 Freauercy is highlighted press GK Press RAA or to select 4 Dails Mon to Fri Saturdas or Surda and press GE 5 Scroll Sam or KEH to Set Time on or Set Time off and press OE 6 Enter the time you want using the keypad in the format hh mm and press Gk The display will show Sauen Record a memo You can record a memo message on the answer machine for other users to hear when they listen to messages Memo messages are played back in exactly the same way as normal answer machine messages 1 Press Hernu Scroll RE to Aniswer Machine Press OK 2 Scroll RERE to Record Meme and press Ok 3 Listen to the voice prompt and after you hear the long beep speak you
19. ating a new message Unread messages are marked new with the dit icon once read the icon changes to the icon 43 Press GK Display shows Delete Press to confirm or Ho to cancel Delete All Press Gk Display shows Delete All Press to confirm or Ho to cancel Store as draft Press Ok The display will show Saved D z 5 Press cR cancel at any time and return to standby Edit or delete templates 1 Press Heru Text is displayed Press Ok 2 Scroll Ray to Teme late and press Ok 3 Scroll or to the template you want to edit or delete and press Ortions 4 Scroll or to select either Edit or Delete and press CK Edit Press Clear to delete characters Enter your template text and press Gk Delete Press es to confirm or Ha to cancel 5 Press Eack to return to the previous menu level Service Centre numbers To send and receive text messages you need the telephone number of your Network s text Centre If you accidentally delete the Send or Receive Service Centre numbers you will need to re enter them in order for your text Service to work You can enter up to 4 Service Centre numbers two Send and two Receive The Send Service number is 1470P17094009 The Receive Service number is 0800587529 44 There are five pre set templates There are five pre set templates Please call l Il be there at What time will I ll call you Happy Birthday You can change the templates to your
20. be compatible with any other Headset Microphone combination terminated with a 2 5mm plug with three metal contact bands poles i The headset socket is located on the side of the handset peel back the rubber bung and plug the headset into the socket You can then make and receive calls as normal Redial Up to the last 10 telephone numbers called are saved in the redial list You can then select any of the numbers to redial delete or copy to the directory Redial the last number called 1 Press the last number you called is displayed 2 Press SE dial Redial a number from the redial list 1 Press a the last number you called is displayed 2 Press ESH or EJ to scroll to the number you want 3 Press Bio dial If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 15 Save a number from the redial list to the phonebook 1 Press then scroll E amp A or to the number you want 2 Press Getions and scroll RM to Store Humber 3 Press Ci Use the keypad to enter a name 4 Scroll ER to Humber The number is displayed Press Gk 5 Graur is displayed If required scroll or to select a group Press Gk Display shows Saved 6 Press Eack to return to the standby screen Delete a redial number 1 Press Ea The last number dialled is displayed 2 Scroll E amp A or to the number you want 3 Press etions and scroll to Delete and press Ok
21. com 3 4 Place the handset on the base to charge for at least 24 hours When the batteries are fully charged plug the end of the telephone line cord into the telephone wall socket Set date and time manually Providing you have subscribed to your network s Caller Display service the date and time is set automatically when you receive your first call To set the date and time manually follow the procedure below 1 Press the right soft key EE r and scroll to Settings press the right soft key EE 21 Date amp Time is highlighted press OE Time Format is highlighted press Ck Press or to choose how you want the clock displayed either 24 Hour or 12 Hour and press Gk Press to Date Format and press Ok Scroll or to choose DD MMAe4 or MADI Y and press OF Press to Enter Time and press Gk Enter the time using the keypad in 24 hour mode only e g 17 30 for 5 30pm and press ik Press to Enter Date and press Gk Enter the date e g 09 04 2010 displayed as 3 4 2618 for 9 April 2010 Press GE Your BT Diverse 7150 is ready for use Battery performance In ideal conditions a fully charged battery should give up to 12 hours talk time or 120 hours standby time on a single charge Note that new batteries do not reach full capacity until they have been in normal use for several days The charge capacity of rechargeable batteries will reduce with time as they wear out giv
22. creen Talk Handsfree In standby mode press to make and receive calls page 13 In talk mode press to switch handsfree on and off page 14 Use to confirm options displayed on screen End call Off or On Press to end a call In standby press and hold to switch the handset off on page 13 In menu mode press to return to standby Headset socket on side of handset Headset not included See page 15 for more information Down Volume down Calls In standby press to open and scroll through the Calls list page 30 In talk mode press to adjust the earpiece volume In menu mode press to scroll down through the options Lock Press and hold to lock unlock the keypad pages 16 17 1 Space Use to enter a space 0 when entering text When storing an entry in the phonebook press and hold to Press and hold to switch the CUQ iterom enter a Pause page 18 handset ringer on or off Used to enter punctuation marks When entering text press when entering text page 18 to switch between upper Intercom and lower case letters Use to make internal calls where more than one Recall For use with switchboard handset is registered PBX and BT Calling Features Microphone If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Handset display Handset name number Time Date L i Press the left soft
23. d your product on carpets or other surfaces which generate fibres or place it in locations preventing the free flow of air over its surfaces If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com e Do not submerge any part of your product in water and do not use it in damp or humid conditions such as bathrooms e Do not expose your product to fire explosive or other hazardous conditions e There is a slight chance your phone could be damaged by an electrical storm We recommend that you unplug the power and telephone line cord during an electrical storm Product disposal instructions DZA The symbol shown here and on the product means that the product is classed as Electrical or Electronic Equipment and should not be disposed with other household or commercial waste at the end of its working life The Waste of Electrical and Electronic Equipment WEEE Directive 2002 96 EC has been put in place to recycle products using best available recovery and recycling techniques to minimize the impact on the environment treat any hazardous substances and avoid the increasing landfill Product disposal instructions for residential users When you have no further use for it please remove any batteries and dispose of them and the product as per your local authority s recycling processes For more information please contact your local authority or the retailer where the product was
24. e keypad to type in the following commands depending upon what you want to do Opt out from receiving voice text messages EB Turns off the opt out option ED turns on permanent voice text message delivery to your phone All incoming text is delivered as voice text EB Turns off permanent voice text message delivery 4 Press Getions Send is highlighted press Ok 5 Enter the number 00000 then press Serd If you are sending a message from a fixed line phone to another fixed line phone Forces a message you send to be delivered as a voice text even though the recipient may have a text enabled phone and usually receives written text This command is inserted at the start of the message and applies only to that message e g Hello will be home late User Guide formats This document is also available in other formats such as Large print Braille and Audio CD If you would like a copy please call 0800 218 2182 If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 55 General information IMPORTANT This equipment is not designed for making emergency telephone call when the power fails Alternative arrangements should be made for access to emergency services This product is intended for connection to analogue public switched telephone networks and private switchboards in the United Kingdom Replacing the handset batteries After a time you may find that the
25. e signals may interfere with some hearing aids causing a humming noise Calls to the Helpline made from within the UK mainland network are free Mobile and International call costs may vary If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com In this guide Getting started Location Setting up Set date and time manually Getting to know your phone Handset buttons Handset display display icons Base Navigating the menus Menu map Using the phone Switch handset on or off Make an external call Preparatory dialling End a call Receive a call Earpiece handsfree volume Call Waiting Secrecy Handsfree Make a handsfree call Answer a call handsfree Switch to handsfree during a call Headset Redial the last number called Redial a number from the redial list 10 Ti 12 13 13 13 13 13 13 14 14 14 14 14 14 15 15 15 Save a number from the redial list to the phonebook Delete a redial number Delete all redial numbers Keypad lock Find handset paging Phonebook Store a name and number in the phonebook View an entry in the phonebook View phonebook capacity Dial an entry in the phonebook Edit a name and number Copy an entry from the phonebook to another handset Copy all phonebook entries to another handset Copy SIM Copy phonebook entries to a SIM card Copy SIM card entries to the phonebook Delete an entry
26. eceipt Calls made from within the UK mainland network are free Mobile and International call costs may vary If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 59 Technical information How many telephones can I have All items of telephone equipment have a Ringer Equivalence Number REN which is used to calculate the number of items which may be connected to any one telephone line Your BT Diverse 7150 has a REN of 1 A total REN of 4 is allowed If the total REN of 4 is exceeded the telephones may not ring With different telephone types there is no guarantee of ringing even when the REN is less than 4 Any additional handsets and chargers that you register have a REN of 0 R amp TTE This product is intended for use within the UK for connection to the public telephone network and compatible switchboards This equipment complies with the essential requirements for the Radio Equipment and Telecommunications Terminal Equipment Directive 1999 5 EC Declaration of Conformance Hereby VTech declares that this BT Diverse 7150 is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC If you would like a copy of the Declaration of Conformance please email bt helpdesk vtecheurope com Connecting to a switchboard This product is intended for use within the UK for connection to the public telephone network and compatib
27. een will show the caller s details If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com A To reset the BT Services numbers Show Edit Delete BT Services numbers iadi o iee restored NtMbEn yai 1 Press a short press only can reset the handset to it s original factory default settings see page 28 2 Scroll E amp A or to select the entry you want and press Or tiors 3 Scroll Feo egg to Show Details and press Ok The number allocated to that entry is displayed Press Back to return to the previous menu level 4 From step 2 above you can also scroll RRG to Edit Entr Delete Entry or Delete All Press Ok then follow the procedure for editing or deleting phonebook entries as shown on page 19 and 21 of this guide If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 34 Answering machine Your BT Diverse 7150 can digitally record up to 27 minutes of messages Each incoming message can last up to a maximum of 3 minutes When the memory is full the handset displays Hemar Full and the base display shows FF You will need to play your messages and then delete some before any more messages can be recorded see page 38 You can operate your answering machine from e the handset e the base e remotely from any other Touchtone telephone see page 36 Your BT Diverse 7150 comes with tw
28. elect the handset you want to copy to and press OK At the receiving handset 4 Display shows Accert entries Press es to confirm or He to cancel 5 When successful the display shows Finished 19 To search alphabetically Press the relevant keypad button e g for the entries beginning with T press once then scroll EA or through the entries When editing a name or number press Clear to delete characters and digits To exit edit mode press jf to return to the standby screen Copy and copy all menu options are only available if more than one handset is registered to the base If you copy an entry that already exists in the receiving handset it will create a duplicate entry If copying is not successful the display will show Corsins tailed on the transmitting handset If the phonebook is full the display will show Mears ful on the receiving handset If the copying process is interrupted e g an incoming call or flat battery the copy process will stop If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Copy all phonebook entries to another handset 1 Press Hames The first entry is displayed 2 Press Ge ticns and scroll ER to Cor All and press Ok 3 Press ESN or to select the handset you want to copy all entries to and press Ok At the receiving handset 4 Display shows Accert entries Press Yes to confirm or Ha to ca
29. ence difficulty using the product prior to returning your product please read the Help section beginning on page 49 or contact the BT Diverse Helpdesk for assistance on 0800 218 2182 or email bt helpdesk vtecheurope com Additional answers to Frequently Asked Questions are available from www bt com producthelp In the unlikely event of a defect occurring the helpdesk will issue a Fault Reference Authorisation FRA number and instructions for replacement or repair Please note you will need the FRA number before returning the product This does not affect your statutory rights Outside of the 12 month guarantee period If your product needs repair after the guarantee period has ended the repair must meet the approval requirements for connection to the telephone network If you require technical assistance outside of the 12 month guarantee period please call BT s approved technical support agent Helpdesk solutions on 0870 240 5029 Returning your phone If the Helpline is unable to remedy your problem they will issue a Fault Reference Authorisation number and ask you to return the product to your original place of purchase Where possible pack the product in its original packaging Please remember to include all parts including the line cords power supply units and the original batteries For your records Date of purchase Place of purchase Serial number For guarantee purposes proof of purchase is required so please keep your r
30. er call If registration is not successful first time please repeat the process again in case the base registration period ran out of time If there are already 5 handsets registered to the base the registration will fail You must de register another handset before you can register the new one If your BT Diverse 7150 handset is registered to more than one base you can select which base to use see page 25 If you have a handset registered to more than one base and then de register it from one of them you will need to re select which base to use Until the base is selected the handset will display Flease Resister If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 46 Registration of an additional handset when base PIN changed i e if PIN changed from default setting of 0000 At the handset 1 Press Heru scroll ER to Settiras and press Ok 2 Scroll Sam to HS Settings and press OK 3 Scroll or to Resister and press OK 4 Press EAA or calls o select the base you want 1 4 You should only select a base that has a displayed beside it Press Gk 5 Enter the 4 digit system PIN then press Gk The display shows Qverurite the resistration on Base x Press Yes 6 Press and Hold Base Find Kes is displayed press GE on the handset to commence registration At the base 1 Press and hold for approximately 8 seconds until it beeps and t
31. f you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Handset ringing priority 1 5 Press Meri scroll to Settings and press OK 2 Scroll ROM to BS Settinas Press OK 3 4 All Handsets is highlighted Press Gk for all handsets to Scroll RRJ to Fins Priorita Press OK ring together Or Scroll RGN to Select Handset Press CK then press EOM or to select the handset you want to ring first Press Ok The ring delay option is highlighted Press or eda to set the number of rings before the other handsets ring Press GE Press Back to return to the previous menu Recall mode 1 2 3 Press Meri scroll to Settings and press OK Scroll ita to BS Settinas Press OK Scroll Sam to Recall Mode Press OK 4 Press E amp A or to select Timed Break or Earth and press CE System PIN 1 vOe w e Press Meru scroll EOR to Settinas and press CK Scroll ER to BS Settinas Press Ok Scroll Beam to Ssstem FIH Press Ok Enter the old PIN default setting 0000 and press tk Enter the new PIN and press ik Re enter the new PIN and press Gi Press Back to return to the previous menu level 27 When you have more than one handset registered to your base you can set one handset to ring before the others This allows one handset user to answer all incoming calls first like a receptionist Choose All Handsets if you want all handsets to ri
32. harge it e You may be hearing an error tone If you press and hold a handset button that does not have a dual function associated with it i e the BT button then a long press will emit an error tone providing the handset key tone is set to on and will not open the BT menu Along press and hold is only used for dual function buttons i e a speed dial and keylock button etc when the dual function will respond and there will be no error tone If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 52 Customer Helpline If you are still experiencing difficulties please call the BT Diverse 7150 Helpline on 0800 218 2182 or email bt helpdesk vtecheurope com Possible problems with text messaging Text messages cannot be sent and screen displays Hessase not sent The base station power supply or telephone line cord might not be properly connected Check that the base station power supply is plugged into the mains socket and switched on and that the telephone is plugged into the telephone wall socket There might be a fault on the line Check your telephone line is working properly You might have deleted the server number in error See page 45 for instructions on how to enter the number Cannot send text Check service centre number is correct including 1470P prefix this is for BT lines If you have another network provider please check the prefix number with them In
33. he handset qt PULL 7 Rechargeable batteries already fitted Remove this tab and charge batteries for 24 hours before use WARNING Do not place your BT Diverse 7150 in the bathroom or other humid areas Handset range The BT Diverse 7150 has a range of up to 300 metres outdoors when there is a clear line of sight between the base and handset Any obstruction between the base and handset will reduce the range significantly With the base indoors and handset either indoors or outdoors the range will normally be up to 50 metres Thick stone walls can severely affect the range Signal strength The icon on your handset indicates when you are in range If moving out of range of the base the range indicator will flash If you go out of range any call you are on will be lost IMPORTANT The base station must be plugged into the power socket at all times Do not connect the telephone line to the telephone wall socket until the handset is fully charged Only use the power and telephone cables supplied with the product Battery low warning If the icon flashes in the handset display you will need to recharge the handset before you can use it again You also hear a low battery warning beep once every 60 seconds During charging the icon will scroll in the display as shown on page 9 If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope
34. hen release Press Gk on the handset to confirm The base will go into registration mode for 90 seconds and will then beep if registration is successful The handset will automatically be assigned the next available handset number Internal calls Call another handset If you have more than one handset registered to the base you can make internal calls between two handsets 1 Press and if you have one other handset it will ring If you have other handsets press or to select the handset 1 5 you want to call then press Gk If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 47 Transfer a call You can transfer an external call to another handset registered to the base 1 During your call press Intercom Your external caller is put on hold 2 If you have one other handset it will ring If you have extra handsets press or to select the handset 1 5 you want then press ik 3 When the other handset answers you can announce the caller 4 Press Snitch to switch between the two callers if required While speaking to the other handset press to transfer the 0 call to the other handset 3 Way conference call If the other handset does not answer press Ea ck to return to your original You can hold a 3 way conference call between 2 internal callers caller and 1 external caller 1 During your call press co Your external caller is put on hold
35. imply store each entry under Ho Grow and your normal ringtone will sound when someone calls The call group options are No Group Friends General Utilities Family VIP Business Others To exit phonebook entry mode press to return to the standby screen To enter a pause ina phonebook number When storing a number press and hold and a F will be displayed For more information on pauses see page 59 If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 3 The number of entries used available is displayed e g 28 188 4 Press Back to return to the previous menu level Dial an entry in the phonebook 1 Instandby press Hames The first entry is displayed 2 Scroll E amp A or to the entry you want or search alphabetically 3 Press SE dial Edit a name and number in the phonebook 1 Press Hames 2 Scroll or to the entry you want 3 Press Getions and scroll SRH to Edit Eritrea and press Ok 4 Hame is displayed Use the keypad to enter a new name Press OF 5 Humber is displayed Use the keypad to enter a new number Press OF 6 Grour is displayed Press Mam or to select a different group Press GE 7 Press GE Display shows Saved Copy an entry from the phonebook to another handset 1 Press Hames Then scroll EAA or to the entry you want to copy 2 Press Getions and scroll SRH to Cor Ents and press Ok 3 Press or to s
36. in the phonebook Delete entire phonebook Edit call group name Change call group ringtone Speed Dial Copy a phonebook entry to a Speed Dial button Delete a Speed Dial entry Edit a Speed Dial entry 16 16 16 16 17 18 18 18 19 19 19 20 20 20 21 21 21 22 22 22 22 23 23 If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Dial a Speed Dial entry 23 Sounds Handset ringer melody for external or internal calls 24 Handset ringer volume including ringer off 24 Set to quiet mode 24 Handset beeps 24 Settings Select base 25 Display contrast Handset name 25 Auto answer 25 De register a handset 26 Handset reset 26 Base ringer melody and volume 26 Handset ringing priority 27 Recall mode 27 System PIN 27 Reset base 28 Date Time Alarm 28 Set date and time 28 Set alarm call 29 Stop alarm ring 29 Calls list Caller Display 30 Calls list 30 View call details 30 Dial from the Calls list 3L Copy a Calls list number to the phonebook 31 Calls list settings Category and New Call alert31 Delete an entry Delete entire Calls list Voicemail BT Network services Pre stored BT Services numbers BT Diverse 7150 Helpdesk BT 118 500 Directory Enquires Call Divert on off check Call Waiting on off check Show Edit Delete BT Services numbers Answering machine Using the answering machine from the handset Switch
37. ing the handset less talk standby time Eventually they will need to be replaced New rechargeable batteries are available from the BT Diverse 7150 Helpline on 0800 218 2182 After charging your handset for the first time subsequent charging time is about 6 8 hours a day depending on usage Batteries and handset may become warm during charging This is normal Using your BT Diverse 7150 ona Broadband line If this product is to be used ona broadband line then you must ensure that it is connected via an ADSL microfilter Using this product on a Broadband line without an ADSL microfilter may cause problems with this product and your Broadband service Additional BT ADSL microfilters can be purchased from www shop bt com If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Getting to know your phone Right soft key In standby press to enter the menu Handset buttons BT Press to open the BT Services menu page 33 Up Volume up Redial In standby press to open and scroll through the Redial list page 15 In talk mode press to adjust the earpiece volume In menu mode press to scroll up through the options Left soft key In standby press to access names in the phonebook Use to select options displayed on screen Press to clear digits and characters go back to the previous menu level or keep pressing to return to the standby s
38. key E Indicates you can scroll Press the right soft key EE to enter the Phonebook up or down for further to enter the Menu menu choices Display icons fl On alarm is set i d On displayed in standby mode to Flash alarm time has been reached indicate handset is in range of the base Off alarm off Pasning to ain yos are ne ngeut A Handset ringer is switched off of range Off out of range or cannot connect to ji The keypad is locked MIS Done Selpateas fm Battery fully charged hel On new text message received im Battery is 3 4 charged Flashing mailbox is full Mm Battery is 1 2 charged Off any messages have been read i Battery is 1 4 charged 3 Empty Icon will flash On during a call Please note battery scrolls between Flashing incoming call empty and fully charged when charging amp On missed call in the Calls list To remove the icon you need to view missed calls See Caller Display page 30 B On handsfree speaker on art On answering machine on Off answering machine off Flashing new answering machine message For this feature to work you must subscribe to your network provider s Caller Display service A fee may be payable If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Base Find Power In use light Press and release to ring all Green light flashes when
39. l to Coll Humber and press Ok Copy a Calls list number to the phonebook 1 Press Bigg 2 Press E amp A or to scroll through the list to the entry you want Press Getions Scroll BRS to Store Humber and press OF Enter the name and press Ok Humber is displayed Edit the number if required and press Gk ao uu A W Grour is displayed Press Rian or to set the call group you want n Press Gi to save 8 Press Eack to return to the previous menu level Calls list settings Category and New Call alert 1 Press Ham 2 Press Ge tions Scroll ER to Settinss and press OF 3 Catesory is displayed press CK Press EOM or to select All Calls or Hew Calls and press Ok 4 Scroll MGM to Hen Coll Alert and press Gk Press ERAI or to select Gm or Ci and press GK 5 Press Eack to return to the previous menu level If you need to edit the number or name press Clear to delete any unwanted characters then enter new ones using the keypad New call alert The new call alert will cause the handset to beep when a missed call is received in the calls list and has not been viewed yet The default setting is OFF If you turn the new call alert oF and the beeping continues you may need to clear all calls in the calls list to stop it Category Al Calls will list answered and missed calls in the Calls list Her Calls will only list unanswered calls If you experience any problems please call the Helpline
40. l to select either Divert on Divert off or Check divert 3 Press No call Follow the spoken instructions or listen for confirmation status of your instructions Call Waiting on off check 1 Press a short press only 2 Scroll RRAS to Coll wait on Call mait off or Chk call wait amp 3 Press SE call Follow the spoken instructions or listen for confirmation status of your instructions 33 IMPORTANT To use BT Services and BT Calling Features you must first subscribe if required to the relevant service from your network provider A quarterly fee may be payable For more details on BT s Calling Features call BT free on 0800 800 150 If you are not connected to the BT network some of these services may not be available Please contact your network provider Call Diversion services may allow other divert options Check with your network provider for details For further information see the BT Calling Features user guide supplied when you subscribe to the services of your choice Along press and hold of the button will emit an error beep if the handset key tone is set to on and will not open the BT menu Call Divert will divert all incoming calls to another number of your choice Call Waiting lets you know if another person is trying to contact you while you are on a call If a second caller rings you will hear a beep in the handset Providing you have also subscribed to Caller Display the scr
41. le switchboards which support tone and pulse dialling and timed break or earth recall If in doubt please consult your service provider Inserting a pause With some switchboards after dialling the access code you may have to wait for a moment while the switchboard picks up an outside line so you will need to enter a pause in the dialing sequence Press and hold Cio insert a pause P before entering the telephone number You may also need to enter a pause when storing international numbers or charge card numbers Recall You may need to use the recall function if you are connected to a switchboard PBX Private Branch Exchange contact your PBX supplier for further information The recall function is set to timed break recall by default and is also used for BT Calling Feature If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com BT amp British Gas J Working together supporting energy saving products BT amp British Gas have joined forces to help our customers find new ways to save energy around the home so we can all do our bit for the environment amp save money too BT is a sustainability leader To find out how we re making our products greener visit A bt com betterworld products Offices worldwide The services described in this publication are subject to availability and may be modified from time to time Services and equipment are provided s
42. lty line or socket Try using another socket or line Call BT on 151 if you still experience problems Buzzing noise on my phone or on other electrical equipment nearby e Sometimes your BT Diverse 7150 can interfere with other electrical equipment if it is placed too close It is recommended that you place your BT Diverse 7150 at least one metre away from electrical appliances or metal obstructions to avoid any risk of interference e Are you using your Diverse 7150 ona Broadband line If you are then please ensure that it is connected via an ADSL microfilter otherwise it may cause problems with your phone and Broadband service BT ADSL microfilters can be purchased from www shop bt com You keep hearing a beep e You have pressed the wrong button in a sequence Check the prompts in the display or refer to instructions in this user guide e The New Call alert might be switched on The default setting is Off but if you have switched this feature On then your handset will beep when a missed call is received in your Calls list See page 30 if you want to switch this feature Off e The beeping might be a new text message alert Check if you have received a new text message and not viewed it yet see page 43 This alert can be switched Off see page 45 e Your battery may be low Please refer to the battery icons on page 9 and check against the icons on your handset display If your battery is low you will need to place the handset on the base to c
43. n abbreviations and smileys etc but to ensure maximum clarity of message delivery abbreviations etc should be used sparingly Writing tips Use the keypad to enter letters and numbers eg to write today 2day Press P four times to enter 2 Press once to enter d Press once to enter a Press three times to enter 3 Press EI to enter a space and use and or for other characters punctuation marks and symbols Press Clear to delete incorrect characters Upper amp lower case Press Gay to change between upper ABC lower abc and sentence Abc case letters Maximum number of characters in a text message is 160 The display shows a character countdown from 160 down to 0 If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Or press Gretiorms to select a number from the Phonebook Redial list or Calls list Scroll or to the option you want and press Gk Scroll to the entry or number you want and press Gi Press GE again to send Store as Draft Press OE to save the message in the Draftbox for sending later To insert a template press Gi The template options are displayed Press ESA or to highlight the template you want then press Gk to insert the template into your text Template 4 When sending a message the display shows Sendina Text then Sert PR 5 Press to return to standby Sent texts are stored in the Outbox If a
44. ncel 5 When successful the display shows Finished Copy SIM Copy entries to and from compatible mobile phone SIM cards Copied entries are added to any existing entries that have been stored You can accept or reject each entry until your phonebook is full Please note the following points otherwise copying will not work e If your SIM card is PIN protected you must remove the PIN before taking the SIM out of your mobile e Entries must be stored on the SIM card itself and not just in your mobile phonebook e 3Gand 5V SIM cards are not compatible with this product Please check with your network provider first if you are unsure what SIM card you have Copy phonebook entries to a SIM card 1 Insert the SIM card into the SIM card tray on the side of the base The SIM card should have the gold chip facing upwards 2 Press Hames 3 Select the entry you wish to copy to the SIM card or any entry if you wish to copy all entries 4 Press Getions and scroll SERA to SIM Cory press OK 5 Scroll Sg to Phone to SIM press 0E 6 Select either Cors Ertra to copy this entry only or Cory All to copy all entries and press Gk When successful the display shows J Coried 20 If the phonebook becomes full during copying the display shows Memors Full If copying is not successful the display shows Corsins failed If you copy an entry that already exists in the receiving handset it will create a duplicate entry
45. ng at the same time or Select Handset to nominate a handset to ring before the others Ring delay options 2 4 6 or 8 rings Earth and Timed Break are settings for switchboard use If in doubt please contact your switchboard service provider The System PIN is used when changing certain settings and registration de registration The default setting is 0000 You can change this to your own preferred 4 digit number If you make a mistake press Clear to delete digits The System PIN is also used as your Remote Access PIN See page 39 for more information on Remote Access If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Reset base This resets your BT Diverse 7150 to its original settings 1 Press Meri scroll to Settings and press OK 2 Scroll Rey to BS Settings Press OK 3 Scroll EOM to Reset Base Press OK 4 Enter the system PIN default setting 0000 and press ik 5 Display shows Reset to Default Press OK to confirm or Eack to cancel 6 Press Eack to return to the previous menu level Date Time Alarm Set date and time Providing you have subscribed to your network s Caller Display service the date and time is set automatically when you receive your first call 1 Press Meru scroll Mam to Settinas and press 0E 2 Date amp Time is highlighted Press Ck 3 Time Format is highlighted press GE Press or eva to cho
46. ng up the current call Secrecy During a call you can talk to someone nearby without your caller hearing 1 Press left soft key EE Secrecy The display shows Secrecy n and your caller cannot hear you 2 Press left soft key again BE Secrec z to return to your caller Handsfree Handsfree lets you talk to your caller without holding the handset It also enables other people in the room to listen to your conversation over the loudspeaker Make a handsfree call 1 Dial the number then press amp twice lis displayed You hear your call over the handset loudspeaker Press N to switch the call between the earpiece and the loudspeaker PP 2 Press ato end the call Answer a call handsfree When the phone rings 1 Press and hoia Bed for at least 2 seconds The call is answered in handset loudspeaker mode Switch to handsfree during a call amp 1 During a call press No put the call on the loudspeaker To switch handsfree off and return the call to the earpiece press amp again To switch your Call Waiting service on or off see page 33 During a handsfree call press EA or to change the volume If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 14 Headset A suitable headset is available to purchase from the BT Helpline 0800 218 2182 just press the button followed by the BS button to call them The headset port should also
47. o pre recorded outgoing messages Answer and Record or Answer Only alternatively you can record your own Using the answering machine from the handset Switch the answering machine on off 1 Press Meru Scroll RR to Answer Machine Press OK 2 Scroll RR to Ariswer OrvOre Press OK 3 Scroll or to highlight Gr or GF Press Back to return to previous menu or ae to confirm When switched on the handset display shows fant 4 Press Back to return to the previous menu level Outgoing messages The outgoing message is the message a caller first hears when the answering machine picks up their call There are 2 prerecorded outgoing messages to choose from see note right or you can record your own 35 You will need to set the day date and time if you have not already done so so that you will know when each message was received If you have subscribed to your network s Caller Display service the date and time is set automatically when you receive your first call To set the date and time manually see page 7 The default day and time setting is Sunday 12 01 pm Voice prompts Your BT Diverse 7150 answering machine has voice prompts to help you use its settings and features Answer and Record Ans amp Rec The pre set Answer and Record outgoing message that allows your caller to leave a message is Hello your call cannot be taken at the moment so please leave your message after the tone Your Ans
48. ollowing page When the handset is switched on and in standby 1 Press the right soft key Sj Meru to open the main menu 2 Then use the or buttons to scroll through the available options 3 Press the right soft key BE GE to select a menu option or the left soft key EE ack to return to the previous screen A D To exit a menu and return to standby press gt 11 Left and Right soft keys Press to select the option displayed on the screen Left soft key Right soft key Up and Down buttons If no buttons are pressed for 30 seconds the handset returns to standby automatically If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Menum ap a Text Write Message Inbox Outbox Draftbox Template Settings eo The following menus can be accessed by pressing the relevant button BT menu Helpdesk BT118500 Divert on Divert off Check divert Call wait on Call wait off Chk call wait Empty Empty 1 Only available if entry not already stored in the phonebook Calls Vv Calls list empty Settings Store Number Settings Answer Machine Sound Play Messages Ringer Delete Msgs Tones Answer On Off Record Memo Outgoing Msg Ans Settings Calls list Redial list displayed displayed press Grticons press Grtions Details Details Delete Delete Delete All Delete All Call Number Call Number Store N
49. order to send and receive text messages you must not withhold your number If you normally withhold your number the 1470 prefix presents your number for you Cannot receive text You will not be able to receive text messages until you have first sent a message The first message sent registers you with the text service More than one text messaging product is plugged into the line Either remove the other text SMS enabled products or see below I want to use more than one text SMS enabled product on my telephone line for alternative instructions Check service centre number is correct Ensure you have subscribed to a Caller Display service and that it is active You can check this by noting if your phone displays your caller s number when you receive an incoming call If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 53 want to use more than one text SMS enabled product on my telephone line It is possible to connect more than one SMS product to the same telephone line and for both of them to send and receive Text messages but you must amend the final digit of both the Send and Receive Service Centre telephone numbers first All BT text capable telephones are provided with the same send and receive telephone numbers but with two or more text capable telephones connected to the same telephone line delivery of text messages becomes unreliable causing the
50. ose you to high voltages or other risks Contact the Helpline on 0800 218 2182 for all repairs e If the keylock is switched on it is possible to make calls to emergency services numbers 999 and 112 e Radio signal transmitted between the handset and base may cause interference to hearing aids e tis recommended that advice from a qualified expert be sought before using this product in the vicinity of emergency intensive care medical equipment e It is recommended that if you have a pacemaker fitted you check with a medical expert before using this product e Your product may interfere with other electrical equipment e g TV and radio sets clock alarms and computers if placed too close e It is recommended that you place your product at least one metre away from such appliances to minimise any risk of interference e Never dispose of batteries in a fire There is a serious risk of explosion and or the release of highly toxic chemicals Cleaning e Clean the handset and base or charger with a damp not wet cloth or an anti static wipe Never use household polish as this will damage the product Never use a dry cloth as this may cause a Static shock Environmental e Do not expose to direct sunlight e The handset may become warm when the batteries are being charged or during prolonged periods of use This is normal However we recommend that to avoid damage you do not place the product on antique veneered wood e Do not stan
51. ose 24 Hour or 12 Hour and press Ok 4 Scroll RRE to Date Format and press Ok Press or ieee to select DIMMA or MMDD and press Ok 5 Scroll to Enter Time and press GE Enter the time using the keypad in 24 hour mode only e g 17 30 for 5 30pm Press GE 6 Scroll ERHI to Enter Date and press Ok Enter the date e g 09 04 2010 displayed as 43 84 2818 for 9 April 2010 and press E 7 Press Back to return to the previous menu level If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Set alarm call 1 Press Meru scroll EAR to Settinas and press CK Scroll RH to larm Press OK v 2 3 4 Scroll to Erter Time and press OE Enter the alarm time using the 24 hour format e g 22 30 for 10 30pm and press Gk Select Grice or Dails using the or buttons and press OK Scroll ERE to Alarm On O F and press CK Press EOM or to select Gm or Ci and press OK Scroll Rg to Rirstone and press GE Press or Ee to select the ringtone you want for the alarm Press GiE to save PP x Press cR return to the standby screen The a icon is displayed if the alarm was set Stop alarm ring When the alarm rings the display shows lt filarm22 and the fl icon flashes The alarm rings for 30 seconds 1 Press Stor to stop the alarm 29 You must set the alarm to ON for the alarm to ring You can select melody 1 15 for the
52. phonebook or any entry if you wish to copy all entries and press Gk 7 Select either Cors Ertra to copy this entry only or Cor All to copy all entries and press Gk When successful the display shows J Corie Delete an entry in the phonebook 1 Press Hames 2 Scroll Stam or to the entry you want 3 Press Oetioms and scroll SRH to Delete Entr and press 0E Display shows Delete Press es to confirm or Ha to cancel 4 Press Back to return to the standby screen Delete entire phonebook 1 Press Hames 2 Scroll to any phonebook entry and press Grtions Scroll Sam or to Delete All and press Ok 3 Display shows Delete All Press t es to confirm or Ha to cancel 4 Press Back to return to the standby screen 21 If you have problems copying phonebook entries from your SIM onto your Diverse 7150 place the SIM back into your mobile and confirm that the phonebook entries are stored on the SIM and not within the mobile handset phonebook If this is not the case then you will need to copy the entries from your mobile handset phonebook onto the SIM Refer to your mobile user guide for details Your Diverse phonebook can only store a maximum of 100 entries If you try to copy more than 100 entries from your SIM card to the Diverse handset then a warning message Hemors Full will be displayed Any available locations will be populated with new copied entries but the entries copied will be in the order they we
53. preferred message up to amaximum of 20 characters If you delete a template without replacing the text it is marked as Emp tH All templates are restored if you reset your BT Diverse 7150 to its default settings see page 28 Do you have two text phone bases connected to the same phone line If you have two text phone base stations plugged into one line you are likely to experience problems receiving text messages Normally only one SMS enabled base unit DECT or cordless can be plugged into any line If you do want to use two base units and still receive written text you must delete receive service centre number from one of the base stations To do this on your BT Diverse 7150 see page 45 This will allow you to send text via either base station but texts will only be received on the product with the active receive centre number If you want to keep more than one text enabled phone connected see the alternative method on page 52 for instructions If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Add or change Service Centre numbers 1 Press Heri Text is displayed press GE 2 Scroll Ren or MEN to Settinas and press 0E 3 Text Centre is highlighted press 0E 4 Scroll Ran or BEE to Send Centre ior 2 or Few Centre 1 or 2 and press Ok 5 If necessary press Clear to delete the current number Enter the new service centre number and
54. press Gk 4 Press E amp A or to select On or O then press Ok to confirm 5 Press Eack to return to the previous menu level 24 You can set different ringtones for external calls and internal calls Choose from 10 polyphonic and 5 standard handset ringtones Melody 1 5 are standard and Melody 6 to 15 are polyphonic Important Changing the handset ringer melody will only change the ringer melody you hear when callers stored under Ho Grour in your phonebook or callers whose numbers are not stored in your phonebook call you To change the ringer melody for callers stored under different call groups see page 22 or for more information on call groups see the notes on page 18 The handset has 5 ringer volume settings plus Off The F icon will be displayed in the idle screen when the ringer is set to Off As a quick way to switch the handset ringer off press and hold B If you switch the handset ringer off you can still hear a tone when you receive an incoming call by changing the Guiet mode setting to Beer Your handset can give a key beep to each button press It can also give a tone to confirm a successful action such as storing a new phonebook entry You can switch these tones on or off individually If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Settings Handset settings Select base You can use this feature if you ve
55. press ik PP 6 Press Eack to return to the previous menu level Or press to return to standby Select Send Service Centre Only service centres that have numbers stored will be displayed as Send Centres 1 Press Heri Text and press OK 2 Scroll or to Settinas and press OF 3 Scroll ERYS to Send Service and press Ok 4 Press Rete or to select the Serd Certre menu and press CE Message alert When you receive a text message e the new message beep will sound at the handset e the new text message icon is shown on the handset display e the base indicator light flashes These alerts can be switched On or Off The default setting is On Switch new text message alert on or off 1 Press Heri Text is highlighted Press 0E 2 Scroll or to Settinas and press OF 3 Scroll to Hen Text Alert and press OF 4 Press E amp R or EJ to select On or 0 and press OF 5 Press Eack to return to the previous menu level 45 If you have more than one Text Centre stored on your BT Diverse 7150 you will need to select which one you want to use for sending see next section below If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Using additional handsets You can use up to five BT Diverse additional handsets with your BT Diverse 7150 base to extend your phone system without needing to install extension sockets for each new phone Your BT Diverse 715
56. purchased Product disposal instructions for business users Business users should contact their suppliers and check the terms and conditions of the purchase contract and ensure that this product is not mixed with other commercial waste for disposal Guarantee Your BT Diverse 7150 is guaranteed for a period of 12 months from the date of purchase Subject to the terms listed below the guarantee will provide for the repair of or at BT s or its agent s discretion the option to replace the BT Diverse 7150 or any component thereof other than batteries which is identified as faulty or below standard or as a result of inferior workmanship or materials Products over 28 days old from the date of purchase may be replaced with a refurbished or repaired product The conditions of this guarantee are e The guarantee shall only apply to defects that occur within the 12 month guarantee period e Proof of purchase is provided e The equipment is returned to BT or its agent as instructed If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 57 58 e This guarantee does not cover any faults or defects caused by accidents misuse fair wear and tear neglect tampering with the equipment or any attempt at adjustment or repair other than through approved agents e This guarantee does not affect your statutory rights Within the 12 month guarantee period If you experi
57. r memo When you ve finished press Sawe 4 Your memo will be played back to you If you want to delete it press telete during playback If you press Ck or wait for it to be played back it will be saved Call screening When an incoming call is answered by the answering machine Screenina will be displayed on the handset To screen the call press es To stop screening and let the answering machine continue to take the call press Erie Screening allows you to hear the caller talking to the answering machine This allows you to hear who is calling in case you want to intercept the call and talk to the caller To do this at any stage screening or not press Si If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 37 Message playback 1 Press Heru Scroll ERA to Ariswer Machine Press OK 2 Flow Messages is highlighted Press Ok 3 The handset displays the number or name of the caller if available the date and time it was received and whether the message is new not been listened to or old already listened to The message is played automatically During playback you have the following options to hear the message over the handset loudspeaker Press SE play back through the earpiece again N to adjust the volume once to repeat the message to play the next message Delete or pW to delete the current message Display shows Deleted
58. re stored on your SIM i e not necessarily in alphabetical order If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Edit call group name 1 Press Hames 2 Scroll to any phonebook entry and press Grtiorns Scroll or RGM to Edit Call Ge and press Ok Scroll Stam or to the call group you want Press Grtians Display highlights Rename Grouer Press 0E Press Clear to delete the current name and enter a new name Press GE to save Press Back to return to the previous menu level Nou WwW Change call group ringtone You can set different ringtones for each call group so you will know when someone from a certain call group is phoning you 1 Press Hames 2 Scroll to any phonebook entry and press Grtiorns Scroll REA or ERJ to Edit Coll Ge and press Gk 3 Scroll or to the call group you want 4 Press GFtians Scroll SRE to Set Rinatone Press Ok 5 Press ERA or to choose the ringtone A sample of each one is played Press ik to save 6 Press Eack to return to the previous menu level Speed Dial You can allocate a name and number from the phonebook to each of the Speed Dial buttons EB to Cy Then you can simply press and hold the Speed Dial button to automatically dial the number stored under it copy a phonebook entry to a Speed Dial button 1 Press Hames 2 Press Getiors and scroll EAA to Seeed Dial and press OK p 3 Scroll
59. rease the volume v 13 When you make a call the amp light on the base flashes Call timer Your handset will automatically time the duration of all external calls The handset display shows the call duration both during and for a few seconds after your call Out of range warning When the handset goes out of range of the base the flashes If you are on a call the line will hang up Move back within range The handset will automatically re connect to the base Auto answer As long as you have auto answer set to ON you can answer a call by lifting the handset off the base If you have switched auto answer off you will need to press I as well Auto answer ON is the default setting See page 25 For more information on Caller Display see page 30 If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Call Waiting Providing you have subscribed to your network s Call Waiting service and it is switched on your BT Diverse 7150 will alert you to a second incoming call while you are already engaged on an external call 1 You will hear the call waiting tone then the display will show Call Maitins and the telephone number of the caller or the stored name and number if it matches an entry in your phonebook 2 Press to answer the new call and your first caller is put on hold 3 Press QB to toggle between the two callers DP 4 Press ato ha
60. registered your handset to two different bases 1 Press Hern scroll Mam to Settinas and press 0E 2 Scroll Ray to HS Settings and press OK 3 Select Ease is displayed press OF 4 Press EOE or to select the base and press Ok Display contrast Handset name 1 Press Heri scroll to Settings and press OK 2 Scroll RE to Diselay and press Ok 3 Cortrast is displayed Either Press 0E then or to select the contrast setting and press Gk Or Scroll to Hame and press Ok Press Clear to delete the current name Enter a new name and then press fk to save 4 Press Back to return to the previous menu level Auto answer 1 Press Meru scroll to Settines and press Ok 2 Scroll ROA to HS Settinas and press OK 3 Scroll to Auto Answer and press Ok 4 Press E amp A or to select Gr or i and press GK to save 5 Press Eack to return to the previous menu level Adjust the display contrast to suit different lighting conditions There are 8 levels Set a name for your handset e g Donna or Office As long as you have auto answer set to ON you can answer a call by lifting the handset off the base If you have switched auto answer off you will need to press as well Auto answer ON is the default setting If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 25 De register a handset 1 Press Meru scroll EOM to Settings and press OK
61. s please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Using the Draftbox Draft texts you store are kept in the Draftbox 1 2 6 Press Meru Text is displayed Press OF Scroll RRE to Draftbox Press Ok Scroll tam or to the message you want and press OF tiors Press Etiam or to select Read Delete or Delet and press OK Fill te If you select Read you can edit the message then press Ortioms and scroll EAA or to select Save Serd Delete or Delete All and press GE to confirm D Press to return to standby Receiving messages When you receive a new text message the a icon is displayed and Hew Text is displayed on the idle screen Read messages 1 F Ii F If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Press Meru Text is highlighted Press Gk Scroll RERS to Inbox and press Ok Scroll or to the text you want to read and press Fead Press EQOA or to scroll through the text Press Getiors and scroll or ER to erly Press OF Repl with original text is displayed Press Ha to use a blank message or es to keep original text in the reply Enter your message and press Grtions select Send and press OK etoils Press k to display the telephone number and date and time the text was received ornare Press Ok Add more text if required and proceed as shown on page 38 for cre
62. sage md to play the next message T to stop playback adjust the speaker volume or during playback At the end of playback press and follow the voice prompt to press again to delete all old messages Remote access You can operate your answering machine from any Touchtone phone by calling your BT Diverse 7150 and entering the 4 digit System PIN To enable disable remote access 1 Press erna Scroll to Answer Machine and press Ok 2 Scroll or ERS to Ans Settinas and press Ok 3 Scroll EOM or BQN to Remote Access and press OK 4 Press E amp H or to select OF or Gr and press OK Remote access When switched on you can call in from another phone to listen to your messages and operate your answering machine You are asked to enter your system PIN so that other people cannot ring up and listen to your messages To change your System PIN see page 27 If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 39 If you forget to switch on your answering machine 1 Call your number from another phone and let it ring After 20 rings the machine will switch on and answer your call Press and enter your system PIN when prompted Play back your messages as shown below in Operating your answering machine remotely If you do not choose to switch your answering machine On it will switch off when the call is ended Operating yo
63. ss EA or RI to select the outgoing message mode Answer Oris or Ans amp Rec Press OK Scroll ERE to Arisuer Delos and press Gk Press EAA or to select the number of rings 2 4 6 8 or Time Saver and press Ok Call M8 to Recorcins Time and press Gk Press BOA or to select the maximum message length 1 2 or 3 minutes or unlimited and press Gk Press Back to return to the previous menu level 36 When recording your Answer Only message remember to advise your caller that they will not be able to leave a message Your own Answer Only message can be up to 1 minute long and will replace the pre recorded message To reinstate the pre recorded messages delete your own recorded outgoing message see Check or delete your outgoing message You cannot delete a pre recorded message If you delete your personal outgoing message the pre recorded outgoing message will be automatically reinstated as your outgoing message Answer mode Choose which outgoing message you want played to callers Answer delay Answer delay sets the number of times your BT Diverse 7150 will ring before the answer machine picks up your call and starts playing the outgoing message You can change the Answer Delay setting to 2 Rings 4 Rings 6 Rings 8 Rings and Time Saver For compatibility with BT 1571 or another voicemail service do not set the ring delay to more than 6 rings For more information on BT 1571 ple
64. text message you tried to send was not successful it is stored in the Outbox View messages in the Outbox 1 Press Meru Text is displayed press OK 2 Scroll to Gutbox and press GE 3 Scroll EAA or to the message you want and press Fead 4 Press Cietions and scroll Ren or RRA to Send Press Sere to re send the message to the original recipient Details Press t to display the telephone number and date and time the text was received Delete Press GE Display shows Delete Press es to confirm or He to cancel Delete All Press Gk Display shows Delete All Press es to confirm or He to cancel Store as draft Press Ok The display shows Saved 42 At any time press Ea ck to go back to the previous screen or press f to cancel and return to standby If the text is not sent the display shows Aborted It is stored in the Outbox and a a icon is shown next to the entry In order to send and receive text messages you must not withhold your number On most networks if you normally withhold your number the 1470 prefix presents your number for you Templates There are five pre set templates Please call I ll be there at What time will I ll call you Happy Birthday Receiving a call while writing a text If you are writing a text and you receive a call your text can be recovered by following the options to Write Message where you can continue to edit your text If you experience any problem
65. the registered handsets helpful phone rings during a call and for finding a missing handset during handset registration page 17 Also used during the registration process page 46 10 Answering machine display Answering machine off 8 99 Answering machine on displays number of messages old or new Flashes when you have new unplayed messages Steadily lit when there are old messages stored A Displayed while a handset is accessing the machine An Displayed while an incoming message is being recorded Message light On when the answer pe machine is on Red icon flashes when BT Diverse there are new messages SIM card tray Insert a SIM card for copying entries to and from the phonebook page 20 Ans On Off Delete i44 SKIP Stopm Play SKIP p Vol Vol Switch Delete current Pressonce Stop play Pressto Skip forward Increase or answering message torepeat back playback tothenext decrease machineon Atthe end ofa the current messages message speaker or off message playback message volume during within 8 seconds twice to play message press once to delete the previous play back all messages message If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Navigating the menus Your BT Diverse 7150 has an easy to use menu system Each menu has a list of options which you can see on the menu map on the f
66. the answering machine on off Outgoing messages Record your own outgoing message Check or delete your outgoing message Answer settings Switch the answering machine on off at pre set times Record a memo Call screening Message playback Delete all old messages Using the answering machine at the base Switch on off 32 32 32 33 33 33 33 33 34 35 35 35 36 36 36 37 af 37 38 38 39 39 If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Switch on off Message playback Remote access To enable disable remote access If you forget to switch on your answering machine 39 39 39 39 40 Operating your answering machine remotely 40 Text messaging SMS Subscribe to the text messaging service Cost of the fixed line service Send a text message View messages in the Outbox Using the Draftbox Receiving messages Read messages Edit or delete templates Service Centre numbers Add or change Service Centre numbers Select Send Service Centre Switch new text message alert on or off Using additional handsets Easy registration of a new additional Diverse handset Registration of an additional handset when base PIN charged Internal calls Call another handset Transfer a call 3 way conference call 41 41 41 42 43 43 43 44 44 45 45 45 46 47 47 47 48 48 Help General information Replacing
67. the handset batteries Replacing the base plinth Safety information Cleaning Environmental Product disposal instructions Guarantee Technical information R amp TTE Declaration of Conformance Connecting to a switchboard Inserting a pause Recall 49 55 55 56 56 56 57 57 59 59 39 59 59 59 If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Getting started Location Place your BT Diverse 7150 within 2 metres of the power socket and telephone socket so that the cables will reach Make sure it is at least 1 metre away from other electrical appliances to avoid interference Your BT Diverse 7150 works by sending radio signals between the handset and base The strength of the signal depends on where you site the base Putting it as high as possible ensures the best signal Setting up 1 Plug the power cable with the blue end into the socket marked on the underside of the base and plug the other end into the power wall socket and switch the power on You can place the cable behind the retaining clip to prevent the plug being accidentally pulled from the socket The base indicator lights up The answering machine is switched on 2 Batteries will come inserted in the battery compartment Remove the protective film from the handset screen and activate the batteries by pulling the plastic tab away from the back of t
68. to a call group scroll or to select a group and press Gi Display shows Saved if you don t want to use this feature simply select Ho Grower 6 Press Eack to return to the standby screen View an entry in the phonebook m Press Hames The first entry is displayed Scroll or to the entry you want Press Oetiors and scroll ER to View Entr A WwW N Press Gk Scroll ROA or R to view the name number and group 5 Press Eack to return to the previous menu level View phonebook capacity 1 From standby press Hames The phonebook is displayed 2 If there are no phonebook entries present scroll to Caracits and press Gk If there are phonebook entries scroll to any entry and press Gretions Scroll ER to Caracity and press Ok 18 Entering names Use the keypad letters to enter names e g to store Tom Press once to enter T Press three times to enter o Press once to enter m Writing tips Press Clear to delete the last character or digit Press or to move backwards or forwards through character digits Press G3 to switch between upper lower or sentence case Press to insert a space Use 3 and or for other punctuation characters Call groups When you store names and numbers you can also store the entry under a call group name e g Family or Friends You can also allocate a different ringtone to each call group see page 22 If you don t want to use this feature s
69. ubject to British Telecommunications plc s respective standard conditions of contract Nothing in this publication forms any part of any contract British Telecommunications plc 2010 Registered Office 81 Newgate Street London EC1A 7AJ Registered in England No 1800000 Printed in China Designed and produced by The Art amp Design Partnership Ltd BT Diverse 7150 02 10 Issue 1 BTE CE
70. umber 2 Only available if more than one handset is registered to the base 12 ft Settings Date amp Time Alarm Display HS Handset Settings BS Base Settings Hames or List Emet Press Phonebook Ortions is empty Call Number Neely Edit Entry SIM to Phone View Entry capacity Copy Entry Copy All SIM Copy Delete Entry Delete All Capacity Edit Call Gp Speed Dial If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Using the phone Switch handset on or off To switch off 1 Press and hold al for about 5 seconds 2 Switch aff HS is displayed press tes to confirm To switch on ay 1 Press and hold until the screen appears Making and receiving calls Make an external call 1 Press IE 2 When you hear the dial tone dial the number Preparatory dialling 1 Dial the number first If you make a mistake press the left soft key EE Clear to delete the last digit 2 Press SE dial End a call A 1 Press E Receive a call When you receive a call the phone rings The display shows the caller s number and if it matches an entry in your phonebook it shows the name also If you do not have a Caller Display service the screen shows External call 1 Press N Earpiece handsfree volume During a call you can adjust the volume of the earpiece or loudspeaker There are 5 levels 1 Press ROAI or E amp H to increase or dec
71. ur answering machine remotely 1 Dial your phone number When you hear your outgoing message press You will hear Please enter your security code Enter your 4 digit system PIN You will hear You have X new messages If you only have old messages you will hear You have X messages followed by To hear main menu press 1 When you have accessed your BT Diverse 7150 you can use the keypad to operate your answering machine Follow the announcements and instructions you hear 40 IMPORTANT You should change the system PIN from the original setting of 0000 See page 27 It is advisable to make a note of your new PIN code and keep it somewhere safe If you enter the incorrect PIN code you will be allowed one further attempt if it is still incorrect you will hear Thank you for calling and your BT Diverse 7150 will hang up If no button is pressed for 8 seconds or more your BT Diverse 7150 will hang up If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Text messaging SMS Welcome to the BT text messaging service on your BT Diverse 7150 Your BT Diverse 7150 can send and receive text messages from participating mobile networks and compatible landline telephones in the UK The fixed line text service is provided under BT s terms and conditions for telephone service These can be found by visiting the BT com
72. ure the handset is registered to the base see page 46 No display e The batteries may be flat dead or incorrectly inserted e Recharge or replace the batteries any replacement batteries must be rechargeable and of the same type supplied If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com 50 Vicon flashes e ls the handset registered correctly to the base see page 46 e Check that the power is correctly connected e Check that the handset is within range of the base e The batteries are low place the handset on the base charger to recharge You hear the busy tone when you press e Another handset registered to your BT Diverse 7150 base may be on the line Answering machine messages have the wrong date and time e Have you set the date and time See page 7 Answer machine not recording messages e The memory may be full Play and delete old messages see page 38 39 e Check whether you have a network based Voice mail service i e BT Answer 1571 BT Call Minder activated on your telephone line If you have either BT Answer 1571 this service answers after 7 rings and cannot be changed Set the BT Diverse 7150 Answer delay page 36 Answer Settings to answer after six rings this will ensure that the answer machine receives the message BT Call Minder this service allows you to vary when the service answers the call either 0 4 7 or 10 rings Change
73. wer and Record outgoing message can be up to 1 minute long and will replace the pre recorded message Answer Only The pre set Answer Only outgoing message where callers hear an announcement but cannot leave a message is Hello your call cannot be taken at the moment and you cannot leave a message so please call later If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Record your own outgoing message 1 Press Hern Scroll RR to Aniswer Machine Press OK 2 Scroll RR to Gutsoina Msa and press OF 3 4 Scroll EE or to highlight Ans amp Record or Answer Record Message is highlighted Press Ok Gris and press GE Speak your announcement after the long beep Press Save to stop recording Your message is then played back If you want to delete it press telete during playback Or press Gk to save Check or delete your outgoing message 1 ae oN Press Meri Scroll RR to Answer Machine Press OK Scroll RHE to Cutsacins Mss and press OF Scroll RHE to Flos Message Press OK Scroll gy to Ans amp Rec or Answer Orly and press Ok Your message is then played back If you want to delete it press telete during playback Or press GK to save Answer settings 1 2 Scroll Press Heru Scroll RR to Aniswer Machine Press Ok Scroll RR to Ans Settinss and press OF amp rsner Mode is highlighted press 0K Pre
74. yable For more information on BT Calling Features call BT free on 0800 800 150 To ensure the caller s name is displayed make sure you have stored the full telephone number including the dialling code in the directory The amp icon will appear in the display when a missed call is received To remove the icon you need to view the missed calls see View call details below If the number is unavailable Unavailable is displayed If the number has been withheld by the caller Withheld is displayed If the call is from the operator Grerator is displayed If the call is from a payphone Faurhone is displayed If the call is from a callback request Callback is displayed If you do not have a Caller Display service an external call is displayed as External Call When there are no calls in the calls list the display shows Eme t a then will offer the Settinas option When a Calls list is open press to scroll from the newest call to the oldest or press gto scroll from the oldest call to the newest If you experience any problems please call the Helpline on Freephone 0800 218 2182 or email bt helpdesk vtecheurope com Dial from the Calls list 1 Press E amp H the most recent entry is at the top of the list 2 Press E amp H or EJ to scroll through the list 3 Press No call the number Or 1 Press SR 2 Press E amp A or to scroll through the list to the entry you want 3 Press Getions Scrol

Technical Specification

Contents

Download Pdf Manuals

Related Search

Related Contents