INSTRUCTION MANUAL
Contents
1. INSTRUCTION MANUAL SONANCE INVISIBLE SERIES ENCLOSURE Introduction 4 Tuck leads against the Thank you for purchasing a Sonance Invisible Series Speaker acoustic damping material enclosure When properly installed this enclosure will greatly to prevent the wires from reduce sound in adjacent areas and enhance the overall sound touching the back of the quality of the Invisible Series Speakers This enclosure is required speaker surface for all open attic installations Box Contents 1 Enclosure with acoustic damping material 2 Mounting screws Enclosure Installation 1 Layout IS speaker on a clean surface 2 Remove and discard cloth backing of IS speaker and retaining O ring 5 Place enclosure in the groove remaining from cloth removal 3 Position enclosure to the side of the IS speaker connect leads to the enclosure 6 Finish installation by screwing the enclosure to the speaker Speaker is ready to install Note The Enclosure has two sets of leads except IS2 model which only has one set of leads to be used with the IS4 SST if using the IS4 or ISW only one set of leads will be used Be sure to note which set is used 7 After installation is complete test the speaker for 60 seconds with a test tone or amplified audio source 2012 Sonance All rights reserved Sonance is a registered trademarks of Dana Innovations Due to continuous product improvement all features and specifications are2. subject to change without notice For the latest Sonance product specification information visit our website www sonance com SONANCE 212 Avenida Fabricante San Clemente CA 92672 7531 USA 33 5746 800 582 7777 or 949 492 7777 FAX 949 361 5151 Rev 06 29 12 www sonance com
Download Pdf Manuals
Related Search