ComPar 10 5-in-1 RGBAW LED spot User manual - Bax
Contents
1. ComPar 10 5 in 1 RGBAW LED spot User manual Safety instructions A WARNING A Always keep this device away from moisture and rain Hazardous electrical shocks may occur A WARNING A Only connect this device to a matching power outlet This device is intended to work on a specified AC currency Connecting this device to power outlets with other voltages may result in permanent damage and possible hazardous situations such as fire or electrical shocks A WARNING A Be careful with every operation of this device Touching live wires inside and outside the unit may cause hazardous electrical shocks This unit must be operated by or under the supervision of an adult This device is not suitable for children Every person involved with the installation operation and maintenance of this device has to Be qualified Follow the instructions of this manual Make sure there is no damage caused by transport If the device seems damaged from the outside do not use it and contact your dealer for more information and consultation To make sure the device maintains in perfect condition and for safe operation it is necessary for the user to follow the instructions and warning notes of this user manual Damage caused by improper use or modifications to the device are not covered by warranty This device does not have any user serviceable parts inside Servicing of this device needs to be done by qualified technicians2. amber warm white Create amazing colour combinations and true pastel warm colours High power light source for bright and intense projection Built in colour macro s automatic chase fade shows and extensive control via DMX Fluent dimmers for each colour fast strobe functionality S L S Signal Loss Setting Blackout or sound controlled mode when no DMX signal is detected DMX operation 2 3 3 RGB 4 5 8 channels T M Intelligent Temperature Monitoring reduces light output to prevent overheating and controls the fan speed Double bracket installed use the fixture as floorspot uplighting fixture or install it to a T bar or truss system Adjustable microphone sensitivity for music controlled mode Menu display and buttons for easy adjustment of settings Low power consumption High output Long lifespan Projection intensity Red 1500lux 1m Green 3000lux 1m Blue 3700lux im White 4100lux 1m Full power 12000lux 1m Connectors DMX 3p XLR male and female Power IEC power connector Power Voltage AC100 240V 50 60Hz Power 50W Fuse F3AL 250V Physical dimensions 170 x 170 x 90 mm weight 1 8 kg Included accessories Power cable with Shucko amp IEC connectors Connectors and wiring schematics DMX connections Electrical wiring DMX output DMX input ALK mounting socket XLR mounting plug Cable Pin International Brown 1 G
3. After this the fixture will project the static color Jump Color switch apply dimmer and strobe options After this the fixture will project switching colors on the set speed Fade Color fade apply dimmer and strobe options After this the fixture will fade from one color to another on the set speed SOUN Activate or disable the built in sound controlled mode This way the fixture will respond to the beat of the music SENE The sensitivity of the built in microphone is adjustable to optimize the built in sound controlled mode For example when your music source speakers are placed far away you might want to increase the sensitivity to make sure that the fixture responds to the sound accurately BALA When using several fixtures it might be possible that you want to optimize the colour temperature when using full output white created by RGB 100 output Some people prefer white with a slight blueish tone others prefer warm white to mimic traditional light bulbs Every separate colour can be changed dimmed to achieve perfect white balance when projecting full white in normal mode Led The LED display will shut off automatically after a few seconds when this function is activated When pressing any button the display will activate again When deactivating the feature the display will be lit permanently DISP Display invert version When using the fixture in a hanging setup it is possible to flip the display so the
4. 072 073 080 081 088 089 096 097 104 105 112 113 120 121 128 129 136 137 144 145 152 153 160 161 168 169 176 177 184 185 192 G W A 193 200 B W A 201 208 R G B W 209 216 R G W A 217 224 R G B A 225 232 R B W A 233 240 G B W A 241 255 R G B W A 3CH Modet CH1 Red 000 255 0 100 000 255 0 100 000 255 0 100 3CH Mode2 000 255 0 100 m Strobe 000 007 No Function 008 255 Strobe slow to fast ba bis 000 004 Blackout 005 080 Colour Macro Colour 1 Colour 31 081 150 Colour Jumping slow to fast 151 220 Colour Fading slow to fast 221 255 Sound Control microphone sensitivit 4CH Mode CH1 Red 000 255 0 100 _ __ S 5CH Mode CH1 Red 000 255 0 100 _ SS o 8CH Mode 008 255 Strobe slow to fast CH3 Red 000 255 0 100 S O 000 255 0 100 000 255 0 100 000 255 0 100 000 255 0 100 CH8 Effect 000 004 Blackout 005 080 Colour Macro Colour 1 Colour 31 081 150 Colour Jumping slow to fast 151 220 Colour Fading slow to fast 221 255 Sound Control microphone sensitivity Technical specifications Powerful and compact LED fixture with unique LED colourmixing system Slimline design easy transport and storage Light source 6x 15W RGBWA 5 in 1 LED chip Full output 12 000 lux 1m Perfect colour mixing thanks to close placement of LED diodes Extensive colour palette RGB colour mixing white cool white
5. Important notes regarding safety and health Never let the power cord come in contact with other cables Handle the power cord and all connectors with the mains with caution Never remove any warning or informative labels from the unit The ground contact always needs to be connected Do not cover or remove the ground contact Never leave cables lying around Do not open the device and do not modify any hard or software of this unit Do not insert this object into air vents Do not connect this device to a dimmerpack Do not switch the system on and off frequently as this will reduce the lifespan of the device Do not drive the inputs of the fixture with a signal larger than required to work at full performance Only use this device indoor avoid contact with water moist or other liquids Do not place items filled with liquids on top of the unit Avoid nearby flames or heat sources do not place this device near flammable liquids gas or flammable items Always disconnect the device when it is not in use for a longer period or time when servicing is needed or when the device needs cleaning Only handle the power cord by its connectors Never pull the cable to remove a connector from its socket as this could lead to damage and electrical shocks Always operate this device with a stable AC current Always operate this device with the AC ground wire connected to the electrical system s ground Never use othe
6. can be found below Auto Automatic lightshow with a pre programmed internal show on a user set speed with optional dimmer and strobe options Select a static color color jump or color fade mode Sound Automatic lightshow with a pre programmed internal show on the beat of the music thanks to an internal microphone which senses the beat of the music and will change a step every time a beat is detected Slave In master slave mode it is possible to link several ComPar 10 fixtures together to create synchronized lightshows in the Auto or Sound mode The first fixture in the chain needs to be set in the Auto or Music mode All the next fixtures need to be set to Slave and will mimic the behavior of the first fixture The master slave function requires XLR XLR cables not included DMX The ComPar 10 can be connected to a DMxX controller with standard XLR XLR cable While doing so a DMxX terminator must be connected to the last fixture at the end of the DMX chain This prevents reflections in the DMxX signal which could cause flickering and unwanted behavior from your intelligent fixtures A DMX terminator is a XLR connector with a resistor of 120 Ohm placed between pin 2 and 3 as a bridge With the following channel assignment it is possible to control the ComPar 10 2CH mode 000 255 Master Dimmer 0 100 CH2 Color Marco 000 008 009 016 017 024 025 032 033 040 041 048 049 056 057 064 065
7. characters will be shown upside down This makes reading the several statuses much easier TEST Self test mode to control all segments and LEDs TEMP Current temperature displayed in degrees Celsius Hour The fixture shows how much hours it has been active This is very practical for rental companies which need to perform service intervals on all fixtures after several hours of performing to maintain optimal shape I T M Intelligent Temperature Monitoring Temperature controlled fan cooling The internal fan of the unit is temperature controlled which means that the fan will only turn on if needed For theatrical and other applications where fixtures need to be as silent as possible this provides lots of convenience When the fixture is not used in blackout mode or used with low output the fan will not turn on The internal fan will turn on when the temperature sensor detects a temperature between 35 and 55 degrees Celsius At first the fan will turn on in low power mode thus being very silent but still cooling When the unit detects that the temperature has not changed or even increased the speed of the fan will increase to its maximum level when the temperature reaches 55 degrees Celsius Temperature controlled power limit protection When working in extreme environments especially high temperature environments such as clubs or sunny outdoor festivals it is important for the drivers and LED modules to stay intact and be r
8. cks and collision during use and transport Do not transport the device while in use Avoid brute force during the installation and operation of this device Familiarize yourself with the functions of the device before use Do not allow operation of the device by unskilled or unqualified people Use of the device in other ways than described in this user manual may cause damage and injury Ayra does not take responsibility for any damage or injury caused by improper use Storage and transport This device is intended for mobile use When transported use the original packaging of the product or a fitting flightcase preferably filled with foam This device is not intended for permanent use Operation breaks will ensure that the lifespan of the device remains unchanged If the device is not used for a longer period of time disconnect it from its power source and store it in its original packaging or in a fitting flightcase Store the device indoor dry and do not expose the device to extreme temperature differences Housing Inspect the housing of the device frequently Severe dents cracks and missing screws should be avoided at all costs Do not use the device when the housing is not in optimal condition Contact your dealer or a skilled technician when in doubt about the state of the device Check the fixture and screws for corrosion Corrosion should not be present on the fixture Contact your dealer or a skilled technician w
9. eliable Therefore the ComPar 10 is equipped with a power drop protection which decreases the LED output when the temperature of the fixture exceeds 60 degrees Celsius For every degree above the 60 degrees limit the output power will be decreased with 5 Temperature controlled protect mode When the temperature of the fixture exceeds 68 degrees Celsius the critical maximum temperature limit is reached and the LED output of the fixture will be shut down automatically A cool down time is applied until the temperature decreases back to 60 degrees Celsius When the temperature of the fixture does not decrease after several shut down actions check the following Is the fan still working Is the fan blocked Is the environment temperature too high Is the fan sucking hot air into its ventilation system Is the fixture too close to other hot objects If you are unable to solve temperature problems shut down the fixture completely and check if the fixture still works when you connect it in a cooler area If you have any problems with the functionality of the fixture after this check contact your local dealer or a skilled technician to inspect the unit The ComPar 10 is equipped with several working modes each with its own advantages For simple events there are stand alone modes for advanced situations there are options to create synchronized lightshows or controlled with a DMX 512 controller A short description for each mode
10. hen corrosion is found on the fixture Every power or signal chassis connector should be mounted tightly Do not use the device when connectors are loose Do not use the power cord when the cores are visible Contact your dealer for a replacement if needed Avoid the buildup of dust and dirt Clean the exterior of the fixture every month with a dry or damp cloth When using the device intensively the cleaning frequency needs to be increased Fuses The main fuse of this device is to be found on the rear of the device In most cases directly next to the power inlet Only replace a fuse for a new one with the same type and rating Do not use a fuse with a higher or lower rating Do not bridge the fuse with electrical wires aluminum foil as the fuse is used for protection against electrical shocks and short circuit Always mount the fuse cover back to the fuse compartment Box contents Box contents 1x ComPar 10 fixture 1x power cable Unit and accessory inspection Always use the supplied power cable to connect the unit to a power supply If the cable appears broken or has visible damage do not use it If the unit is not going to be used for a longer period of time disconnect it from the power supply and store it in a dust free environment Always check the unit for possible damage before use If you suspect that something is wrong with the unit do not connect it to a power source When you suspect that your unit
11. is broken or damaged contact your local dealer or a certified technician to inspect the unit 1 Beam output 2 Tightening knobs 3 Dual bracket 4 LED display with menu buttons 5 Safety eye 6 Built in microphone 7 DMX output 3p XLR 8 DMX input 3p XLR 9 IEC power input with fuse 10 IEC power output link Device overview MASTERe WRAN i Ei HEHE i p i 1 ERR Pi DISPLA ERE RHEA PEET CH I IEE il EHR Ig DMX e SLAVE EEIEIEE A HP A K eed ind H We ii i Setting up the unit To activate the unit connect the included power supply to the unit and a suitable 230V 50 Hz power outlet The fixture will start up and show the last chosen setting on the display Usually with a new product this is the DMX mode with the value set on 001 The display shows several settings each with the possibility to set several values Use the display and the menu buttons to set preferences change settings and scroll through the menu Enter is used to save a certain setting or preset press Menu for at least 2 seconds to discard the change and return to the main menu The table below shows an explanation for every feature and value display Mode s CSsC sSY ADDR DMX address setting A001 A512 CHND Channel mode 2CH 3CH1 3CH2 5CH 8CH Slave 1 Slave 2 Color Color 1 31 Strobe 0 255 Jump Speed 0 99 Strobe 0 255 Fade Speed 0 99 Strobe 0 255 SOUN Sound controlled mode S
12. ound controlled mode on off SENE Sound sensitivit Sound sensitivity 0 100 BALA White Balance Red 000 255 Green 000 255 Blue 000 255 DISP___ Display inversion Display Inversion Idsp dsp Hour Using time of light Fixture hours 0 9999 00000000 ADDR DMX address setting used to determine the DMX starting channel From this channel on the fixture will respond to values corresponding with the amount of channels that the fixture is occupying For example when you turn the fixture in 3CH mode and set the starting address to value 003 the fixture will respond to channels 3 4 and 5 CHND The channel mode of the fixture makes it possible to use the correct channel mode setting for every application For simple and basic setups users may prefer to use the 2 or 3 channel mode For advanced applications the 5 or 8 channel mode might be preferred SLND When using the master slave function you need to connect 2 or more fixtures with XLR XLR cable The first fixture in line needs to be set as master the others as Slave 1 or 2 synchronized or mirrored performance This way the slaves will mimic the behavior of the master fixture for wonderful synchronized lighting shows ShNd Show programs which are used to turn the fixture in a stand alone LED projector which changes colors automatically by switching fading or performing static with a certain color and intensity Color Select a color apply dimmer and strobe options
13. r types of cables than specified in the manual do not use defective or bad functioning cables Contact your dealer when the included or required cables do not work properly with this device When the device has been exposed to large temperature differences for example transport from outdoor to indoor do not connect the device immediately Do not activate the unit until it has reached room temperature as moist might build up inside the unit which may cause shortcuts and or electrical shocks Guidelines and types of use This device is intended to be used by professionals on stage in theatres clubs and other equal venues This device is not suitable for children and always needs to be operated by an adult Only use the device when the environment is suitable and will not cause any damage Do not use the product in moist or dusty environments or where long term damage may occur such as indoor swimming pools where chlorine is used Beaches where sand and salt are present Outdoor without roof protection Indoor areas where intense heat sources are present or where the temperature exceeds levels which are comfortable for humans Only use the included power adapter and only connect the device to a suitable power outlet with the correct output voltage Connecting the device to a power outlet with the wrong type of voltage or using the prodcut with a wrong type of power supply may cause permanent damage to the device Avoid sho
14. round Blue Neutral 2 Signal i 3 sienal Y Bllow Green 1 Ground 2 Signal 3 Signal
Download Pdf Manuals
Related Search