LED Par 56 Short DMX - Lite
Contents
1. fl LED Par 56 Short DMX ORDERCODE 42422 SHOWELECTRONICS FOR PROFESSIONALS Congratulations You have bought a great want simple plug amp play action or a You con get some of the best qu So next time turn to Always get the best Showtec l Thank you rec Showtec Showtec LED Par 56 Product Guide Warning Sately instructions Operating Determinations Rigging Description Features and Overview Set Up and Operation Control Modes DMX Channels Maintenance Troubleshooting No Light Product Specifications WARNING CAUTIONI Keep this device away from rain and moisture Unplug mains lead before opening the housing FOR YOUR OWN SAFETY PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START UP SAFETY INSTRUCTIONS Every person involved with the installation operation and maintenance of this device has to be qualified fallow the instructions of this manual CAUTION Be careful with your operations With a dangerous voltage you can suffer a dangerous electric shock when touching the wires Before your intial start up please make sure that there is no damage caused by transportation Should there be any consult your dealer and do not use the device To maintain perfect condition and to ensure a safe operation itis absolutely necessary for the user ta follow the safety instructions and waming notes written in this manual P2. 3 fol of the above appears to be O K plug the unitin again 4 you are unable to determine the cause ofthe problem do not open the LED Par 56 os this may damage ine unt and the warranty wil become void 5 Retum Ino device to your Showtec dealer No Light This troubleshooting guide is meant to help solve simple problems If a problem occurs cany out the steps below in sequence until a solution is found Once the unit operates properly do not carry out following steps Ifthe ight effect does not operate property refer servicing to a technician Response Suspect two potential problem areas the power supply or the LEDs 1 Power supply Check that the unitis plugged into an appropriate power supply 2 The LEDs Retur tne LED Par 56 to your Showtec dealer Product Specification Model Showtec LED Par 56 Voltage 240V 50Hz CE Power 15W Weight 1 56 ko Minimum distance Minimum distance from flammable surfaces 0 5m Minimum distance to lighted object 1 3m Design and product specifications are subject to change without prior notice Website www Highlite nil Email service highiite nil HIGHLITE INTERNATIONAL BV
3. to make sure that satety relating and machine technical installations are to be inspected by a skiled person ance a year The following points have to be considered during the inspection 1 AI screws used for installing the device or parts of the device have to be tightly connected and must not be corroded 2 There may not be any deformations on housings fixations and installation spots 3 Mechanically moving parts ke axles eyes and others may nol show any traces of wearing 4 The electric power supply cables must not show any damages or material fatigue The Showtec LED Par 56 requires almost no maintenance However you should keep the unit clean Otherwise the fiture s ight output will be significantly reduced Disconnect the mains power supply and then wipe the cover with a damp cloth Do nat immerse in liquid Wipe lens clean with glass cleaner and a soft cloth Do not use alcohol ar solvents Keep connections clean Disconnect electric power and then wipe the DMX and audio connections with a damp cloth Make sure connections are thoroughly cry before linking equipment or suppiving electric power Troubleshooting This troubleshooting guide is meant to help solve simple problems if problem occurs cam out the steps below in sequence unt a solution is found Once the unit operates propery do not cany out folowing steps line device does not operate properly unplug the device 2 Check ina power rom the wall cl cables ete
4. Setting 01 Dipswitch Setting 10 Dipswitch Setting 11 Dipswitch Setting fin 100 4 DMX Mode When all dipswitches are turned off ihe LED Parcan is in DMX Mode Dipswilches 1 9 control the DMX Addresses DMX ADD DMX products must have their own address to receive DMX signals Addresses on the controller are set by flipping the appropriate DMX dipswitches You need to know that DMX address settings are the sum of the dip switch values A standard DMX address for a Showtec LED Par 36 which has 6 channels is as follow Example LED Par 36 Address Value DMX Dip Switches ON Unit 25 1 4 85 Switch Value 1 1 4 8 5 ik Totalsum 725 Explanation Since each unit has 6 channels each address advances 4 values See Address Value above Once address values are determined add DMX dipswitch values to obtain the appropriate address DMX Dip Switches ON for each unit Fip appropriate DMX dipswitches on each unit DMX Channels Channel 1 R Channel 2 Channel 3 Channel 4 Full Color Channel 5 Strobe and Speed Channel 6 Modi Mode 1 Mode 2 Mode 3 Mode 4 TE RGB CORNI TA 127 7 color fade 128 191 7 color change 192 255 music controled Maintenance The operator has to make sure that safetvrelaling and machine technical installations are to be inspected by an expert after every four years in the course of an acceptance test The operator has
5. ble Pin L BROWN RED YELLOW COPPER FASE N BLUE BLACK SILVER NUL YELLOW GREEN GREEN GREEN EARTH Make sure that the device is always connected properly to the eorth Description of the device Features The Showtec LED Par 56 i a LED parcan with high output and great effects Never change lamps again 153 LEDs SI Red 51 Green 51 Blue 6DMX channels Overview Set Up and Operation Follow the directions below os they pertain to your preferred operation mode Before plugging the unit in aways make sure that the power supply matches the product specification voltage Do not attempt to operate a 120V specification product on 230V power of vice vers Damages caused by non observance are not subject fo warranty Control Modes 1 AUTO Mix Color Mode When dipswitch 9 and 10 are tumed on the LED Parcan is in AUTO Mix Color Mode Dipswilches 1 7 control the changing speed LPT Li maq 2 Sound Control Mode When dipswitch 811 is tumed an the parcan will automatically change its color ta the beat of the music With the Sensitivity control you can adjust its music sensitivity 3 Manual Mode When the dipswitches 8 9 and 10 are tumed on the LED Parcan is in Manual Mode Dip Switches 1 and 2 control the brightness of the Red LEDs Dip Switches 3 and 4 control the brightness of the Green LEDs Dip Switches 5 and 4 control the brightness of the Blue LEDs 00 Dipswitch
6. he relative humidity must not exceed 50 with an ambient temperature of 45 C It this device is operated in any other way than the one described in this manual the product may suffer damages and the warranty becomes void Any other operation may lead to dangers like short circuit bums electric shock lamp explosion crash etc You endanger your own safety and the safety of others Rigging Please follow the European and national guidelines concerning rigging trussing and all other safely issues Do nat attempt the installation yourself l Always let the installation be carried out by an authorized dealer Procedure Ifthe LED Par 56 is lowered from the ceiling or high joists professional russing systems have to be used Use a clamp to mount the LED Par 56 with the mounting bracket to the trussing system The LED Par 56 must never be fixed swinging freely in the room The installation must always be secured with a safety attachment e g an apprapriote safely net or sofety coble When rigging derigging or servicing the LED Par 56 always make sure that the area below the Installation place is blocked and staying in the area is forbidden Improper installation can cause serious damage to people and property l Connection with the mains Connect the device to the mains with the power plug Always pay attention that the right color cable is connected to the right place International EU Cable UK Cable US Ca
7. he unit securely preferabiy in tne original packing material and retum it to your Showtec dealer for service For adult use only Light effect must be installed out of the reach of children Never leave the unit running unattended For replacement use tuses of same type and rating only This device can be installed on a flat surface or onto truss systems via the mounting bracket The user is responsible for correct positioning and operating of the LED Par 56 The manufacturer will not accept liabiliv for damages caused by the misuse or incorrect installation of this device This device falls under protection class Therefore it is essential to connect the vellow green conductor to earth During the initial start up some smoke or smell may arise This is a normal process and does not necessarily mean that the device is defective Repairs servicing and electric connection must be carried out by a qualified technician e WARRANTY Til one year after date of purchase CAUTION EVEDAMAGES Avoid looking directly into the light source meant especially for epileptics OPERATING DETERMINATIONS This device is not designed for permanent operation Consistent operation breaks will ensure that the device will serve you for a long time without defects The minimum distance between light output and the iluminated surface must be more than 0 5 meters The maximum ambient temperature te 45 C must never be exceeded T
8. lease consider that damages caused by manual modifications to the device are not subject to warranty This device contains na user serviceable parts Refer servicing to qualified technicians only IMPORTANT The manufacturer will not accept liability for any resulting damages caused by the non observance of this manual or any unauthorized modification to the device 4 Neverlet the power cord come into contact with other cables Handle the power cord and all connections with the mains with particular caution Never remove warning or informative labels from the unit Do not open the device and da nat modify the device Never use anything ta cover the ground contact Never look directiy into the ight source Never leave any cables lying around Never use the device during thunderstorms unplug the device immediately Do not insert objects into air vents Do not connect this device to a dimmerpack Do not switch the device on and off in sort intervals as this would reduce the lamps if Do not touch the device s housing bore handed during its operation housing becomes very hot Do not shake the device Avoid brute force when instoling or operating the device Only use device indoor avoid contact with water or other liquidi Only operate the fixture after having checked that the housing is fimily closed and all screws are fightly fastened Only operate the device after having familiarized with its functions Avoid flames and do not put cl
9. ose to flammable liquids or gases Always replace the lamp when it is damaged or deformed due to the heot Aways keep case closed while operating p Always allow free air space of at least 50 cm around the unit for ventilation Aways disconnect power from the mains when device is not used before cleaning or when replacing lamp Oniy handle the power cord by the plug Never pull out the plug by tugging the power cord e Make sure that the device is not exposed to extreme heat moisture or dust 4 Make sure that the available voltage is not higher than stated on the rear panel Make sure that the power cord is never crimped or damaged Check the device and the power cord from time to time Make sure that no side forces can impact on the truss system 4 The coble insert or the female port in the device must never be strained There must always be sufficient cable to the device Otherwise the cable may be damaged which may lead to deadly electrical shocks if device is dropped or struck disconnect mains power supply immediately Have a qualified engineer inspect for safely before operating 4 ifthe device has been exposed to drastic temperature fluctuation e g after transportation do not switch it on immediately The arising condensation water might damage your device Leave the device switches off until if has reached room temperature e Ifyour Showtec device fails to work properly discontinue use immediately Pack t
Download Pdf Manuals
Related Search