NAS-7101 User Guide - PLANET Technology Corporation.
Contents
1. admin guest share Authenticate public Connecting to smb 192 168 2 1 o o Th hhh Cancel 38 8 Input Username and Password in the SMB CIFS Filesystem Authentication window and then click OK SMB CIFS Filesystem Authentication Enter username and password for ARINAS Workgroup Domain WORKGROUP Username admin Password as Mi Add to Keychain ER Connecting to smb 192 168 2 1 9 Ifthe connection succeeded you can see the NAS icon in the left column ADMIN 2 MIA argosy A Applications Py Documents dang Movies amp Music la Pictures 10 Click the symbol by the right side of the NAS icon to unmount this device lt gt Jl Ea Network E 101 1021 E 9227C SnapNDrag 2 4 1 2 GG Desktop y argosy A Applications My Documents ey Movies amp Music as Pictures 39 8 Mounting SMB Server in Linux The following operation is performed in Fedora command line environment The IP address of this device is set to 192 168 0 100 its default value Actual scenario of application may vary from case to case 1 Using the smbclient command to check the content of the NAS 7101 2 Input smbclient L 192 168 0 100 U admin after the prompt The system will prompt you with Password Input admin the default password for user admin to get a list of directories within the NAS 7101 root localhost misc smbclient L 192 168 0 1002. 1 Bay SATA NAS Server NAS 7101 User s Manual Copyright C 2008 PLANET Technology Corp All rights reserved The products and programs described in this User s Manual are licensed products of PLANET Technology This User s Manual contains proprietary information protected by copyright and this User s Manual and all accompanying hardware software and documentation are copyrighted No part of this User s Manual may be copied photocopied reproduced translated or reduced to any electronic medium or machine readable form by any means by electronic or mechanical Including photocopying recording or information storage and retrieval systems for any purpose other than the purchaser s personal use and without the prior express written permission of PLANET Technology Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications and makes no warranty and representation either implied or expressed with respect to the quality performance merchantability or fitness for a particular purpose PLANET has made every effort to ensure that this User s Manual is accurate PLANET disclaims liability for any inaccuracies or omissions that may have occurred Information in this User s Manual is subject to change without notice and does not represent a commitment on the part of PLANET PLANET assumes no responsibility for any inaccuracies that may be contained in this User s Manual PLANET
3. Step 1 3 gt Wizard gt Add User Add Group ORAR Group Name PLANET gt Add Share 14 2 Group Members Set up group members Select a user from the Non Members column and click Add to categorize it into this group Select a user from the Members column and click Remove to remove this user from this group 3 PLANET 1 Bay SATA NAS Basic Control Panel Personal Info Logout A ni Step 2 3 gt Wizard gt Add User Group Member planet OR CCR Member Non member gt Add Share admin enm questshare fesse END LIST sana 3 Share Permission Set group permission of each shared directory Select a share name from the Access Denied column and click Read Only or Writable to allow group access right Select a share name from the Access Granted column and click Remove to disable group access right from this directory D PLANET 1 Bay SATA NAS Basic Control Panel Personal Info Step 3 3 Wizard Add User Share Permission planet J Add Group Access Granted Access Denied Add Share lt lt Read Only ublic Remove gt gt 15 4 2 4 Add Share To add a sharing directory select the Add Share chapter for setting Please refer to Share Management chapter for more detail 1 Add Share Set up the directory name JPLANET 1 Bay SATA NAS Basic Control Panel Personal
4. E Others E 11 5 Time Setting Adjust date time and time zone of your local position Or select a NTP Network Time Protocol server for automatic time setting and calibration 3 PLANET 1 Bay SATA NAS Basic Control Panel Personal Info Step 5 6 ans gt Wizard Add User Time Settings Date Month 1 Y Day 1 he Year 2007 7 Time Hour 12 Minute 8 PM v Time Zone GMT 08 00 Taipei y NTP Server O Default Add Group Add Share None Y O User Define 6 Wizard Setting Confirmation Click complete to implement above settings Y PLANET 1 Bay SATA NAS Basic Control Panel Personal Info A ge ni Step 6 6 gt Wizard gt Add User Wizard Setting Confirmation e inh Current Settings New Settings Lamata Ul Language browser browser Hostname nas 7101 nas 7101 Automatic Obtain Automatic Obtain ads IP Address IP Address Subnet Mask Subnet Mask Default Gateway Default Gateway Automatic Obtain Automatic Obtain DNS Server ae a Secondary Secondary Others Others Date and Time 1 1 2007 0 8 PM 1 1 2007 0 8 PM 12 4 2 2 Add User To add user support select the Add User chapter for setting Please refer to Users and Groups chapter for more detail 1 Add User Setup user name and password Check Crate Private Folder box for creating a home directly of this user D PLANET 1 Bay SATA NAS B
5. Info Step 1 3 A y As gt Wizard Add User Add Share Add Group Share Name ShareFolder J Add Share Path Description Optional 2 Windows FTP access Set user group permission of this directory in Microsoft Network and FTP environment Select a share name from the Access Denied column and click Read Only or Writable to allow user group access right Select a share name from the Access Granted column and click Remove to disable user group access right from this directory Check the box Grant access to all will enable writable permission of this directory to all users groups 3 PLANET 1 Bay SATA NAS Basic Control Panel Personal Info A Step 2 3 gt Wizard gt Add User Windows FTP Access sharefolder gt Add Group DO Grant access to all ORCC ELT Access Granted Access Denied ses END LIST lt lt Read Only admin enm lt lt Writable Writable guestshare Aquestshare planet The prefix denotes Group Name 16 3 NFS Access Set IP access permissions of this shared directory in Unix like environment Input IP Address and click Add to add this IP to the allowed list Input Subnet the start of allowed IP address before the slash the end of allowed IP address after the slash and click Add to add this subnet section to the allowed list Check Allow to All box to enable NFS access of thi
6. Panel Personal Info Printer Server Setting ae Enable gt File Server Printer Name gt Share Management Description No printer exists 5 Printer Server optional P Save Check Enable box to enable Printer Server function Uncheck Enable box to unmount a mounted printer D PLANET 1 Bay SATA NAS Basic Control Panel Personal Info Printer Server Setting Enable Y Printer Name usblp0 Description te deskiet 3500 gt Printer Server optional OR gt File Server gt Share Management Save This device detects the connection of a USB printer automatically Information of the printer will be shown in the description 20 4 5 System 4 5 1 LAN Settings J PLANET 1 Bay SATA NAS Basic Control Panel Personal Info Logout dai Users and Groups E A y LAN Settings an File and Print gt File Server gt Share Management gt mn gt Time Settings gt Turn Off Server ae Aa Hostname nas 7101 IP Address Setting Obtain IP Address automatically Use following IP Address _ Printer Server IP Address Subnet Mask LAN settings Default Gateway Obtain DNS Server Address automatically Use following DNS Server Address _ a e Primary EA EL gt Information SE gt Disk Usage Dies Ji bd MAC Address 00 30 4F 2B D0 01 aa Network Service A as Maintenance an Lo
7. Ra Format Button Press this button to format a specific HDD lt supports EXT3 and FAT32 file system Check the encrypt box to allow password protection over the HDD Scan Button Press this button to check disk integrity Umount button This device will automatically mount a USB Storage Device connected to it But you need to manually unmount the USB Storage Device before disconnecting it Detail Button If the HDD supports S M A R T it will report its health status Disk Spin Down Time Specify the HDD spin down time if there is no access to this device for some while 4 7 2 Firmware Upgrade You can perform firmware upgrade with this function by selecting a firmware upgrade file and then clicking the Start Upgrade button When the upgrade is in progress all network connection will be stopped This device will automatically reboot after the upgrade is completed 3 PLANET 1 Bay SATA NAS Basic Control Panel Personal info Disk Utility Ay A z Firmware Upgrade m fay e Current Firmware Version 2 6 3 n 20080320 E Upgrade File Browse z gt Firmware Upgrade Save Configuration Restore Configuration Factory Reset Software Update 28 4 7 3 Save Configuration This device can save its current configuration to a local file The default file name is config tar 3 PLANET 1 Bay SATA NAS Basic Control Panel Personal info Save Configuration You can Save Download the conf
8. port 21 for FTP protocol In the URL bar of your browser input ftp your account router hostname_or_router public IP instead It is recommended to have a static IP address for the router of the FTP server to enable stable connections FTP Server 9 4 Printer Server Connect a USB printer to NAS 7101 and share this printer to members in the same LAN Note GDI Interface printers are not supported Printer Server Cam Switch Hub 9 5 USB Mass Storage Device Connect your USB Mass Storage Device to NAS 7101 The two USB ports can supply up to 350mA of current in total If you would like to connect a USB external HDD to one of the USB host ports it is recommended to apply external power to the USB HDD NAS 7101 will automatically mount a USB Mass Storage Device connected to it A USB external drive connected to NAS 7101 will be seen as Wyour hostnamelusb1 or Wyour hostnamelusb2 in Windows Explorer But you need to manually unmount the USB Mass Storage Device before disconnecting it You can unmount a USB drive by Control Panel gt Maintenance gt Disk Utility gt clicking Umount button USB Mass Storage Device Y PLANET Networking amp Communication EC Declaration of Confomi For the following equipment Type of Product 1 Bay SATA NAS Server Model Number NAS 7101 Produced by Manufacturer s Name Planet Technology Corp Manufacturer s Address 11F No 96 Min Chuan Road Hsin Tie
9. 192 168 0 100 mnt admin after the prompt After the input of the mount command the system will prompt you with Password Input the corresponding password of the user Unmount a directory mounted Input umount mnt admin to unmount the shared directory root localhost umount mnt sdmin root localhost 7 Input umount mnt usb1 to unmount the USB external drive root localhost umount mnt usbl root localhost 7 i 41 9 Network Applications 9 1 Personal Data Backup For a single user you can use NAS 7101 as an external hard drive to store your data via Ethernet connection Personal Backup 9 2 Network File Sharing With NAS 7101 a group of people in a LAN environment can share and store files over Ethernet connection NAS 7101 could work with 10 100 1000 Base T Ethernet environment Files Sharing Remote Data Backup Switch Hub AINA 9 3 FTP Server NAS 7101 features FTP function You can access the FTP via a web browser or a FTP client 1 If you are in the same LAN of NAS 7101 simply input ftp your account your hostname_or_IP address in your browser s URL bar and press Enter key or open a connection by your hostname or ts IP address with a FTP client Login with a set of username and password you set previously to get access to NAS 7101 If you are accessing NAS 7101 over Internet connection the router of NAS 7101 will have to set a NAT mapping on
10. Password session setup failed NT_STATUS LOGON FAILURE root localhost misc smbclient L 192 168 0 100 Password Domain PLANET O5 Unix Server Samba 3 0 20 sharename Type Comment admin Disk public Disk Folder Share for public fuest share Disk Folder Share for guest usbl Disk usb disk PCS IPC IPC Service ADMINS IPC IPC Service Ip Printer Generic dot matrix printer entry Domain PLANET O5 Unix Server Samba 3 0 20 Server Comment Workgroup Master WORKGROUP ARINAS root localhost misc ii 3 Create a folder as the mount point for the NAS 7101 Inout mkdir mnt admin after the prompt for mounting of the shared directory admin root localhost mkdir mnt admin Input mkdir mnt usb1 after the prompt for mounting of the USB external drive root localhost mkdir mnt usblff 4 Mount the NAS 7101 with mount command Fedora 5 and later Input mount t cifs o username admin 192 168 0 100 mnt admin after the prompt to mount the shared directory root localhost mount cifs o username admin 192 168 0 100 admin mnt sdmin Password root localhost J 40 Input mount t cifs o username admin 192 168 0 100 mnt usb1 after the prompt to mount the USB external drive root localhost mount t cifs o username admin 192 168 0 100 usb1 mnt usbl Password root localhost fi Fedora 4 and earlier Input mount t smbfs o username admin
11. SB2 0 Printer Hi speed Save gt Printer Server optional 2 Input Ayour hostname default arinas in the URL bar of an Explorer window Double click on the Ip icon P MY NAS your hostname SEE e File Edit View Favorites Tools Help Q Back gt wi pa Search Ke Folders ins Address YY your hostname v Go L 2 amp Y R guest share Ip public test a za Printers and Faxes 3 A dialogue box will pop up Click Yes to continue Connect to Printer You are about to connect to a printer on your hostname which will automatically install a print driver on your machine Printer drivers may contain viruses or scripts that can be harmful to your computer It is important to be certain that the computer sharing this printer is trustworthy Would you like to continue 4 Another dialogue box will pop up Click OK to continue Connect to Printer The server For the printer does not have the correct printer driver installed If you want to search for the proper driver click OK Otherwise click Cancel and contact your network administrator or original equipment manufacturer for the correct printer driver 34 In the Add Printer Wizard window select the manufacturer and printer model corresponding to the printer connected If the manufacturer of the specific model of your printer is not available in the list click on the Have Disk button to install its driver from the driver disk provid
12. UNCIONS aia da 2 2 1 ASSOMDIS Ol MERTA DISK DIV AAA A A A A 3 2 2 GOMmection anda Removing GOMecCUON isesi aaa a a a a aaia 4 2 2 NGIWOIK GONMECHO vrs eaa a a aa 4 2 2 2 USB Printer Storage Device CONNECTION ciais einari eaa anavaa eana aaa daana ieaiai at 4 2 3 REMOVING CONNECTION csmi aa e a a a aaa a aa aa aaa nanai 5 2 3 1 Removing USB Mass Storage DeVICES irean ani a a aa a a EA 5 230 2 FREMOVING USB Mi a a a aa 5 2 3 3 REMOVING POWEF CONNOR 5 AUN A A EATE A AEA ESAE AT E AA cece ATA E A EE TET 6 Webp Dased Mana a a a aa a a 9 A TEO mei a a ARO RT 9 LS id 10 4 2A NNIZANG A AS 10 a tao AA e O y Atag ies areca T A amet A 13 Aoo Add Oropesa a ee RE A eee 14 AZ AAA SS ia aa 16 AA A nn Ms ele Gee A 17 ASA USEN MANAGES IMG IAN PARC PE N hicemsien ae a 17 dore NOU Mana dementes elite 18 A ATG AN cai S 18 A A o A A E EE 18 AA 2 nara Mana demente 19 A dt casa a sd lian haa lnct ala ive aadasaheae teu iabe hae ennai vasa denen eats 20 APD OY SM dd de aaa a da 21 A teed celetucsestenl cocoate a Rite teedescctetac austen eeneleieneasie tata acs aeons aeke 21 A cpeticich wicker tem ius ines fiesta aa an a a a ea 22 A nn e 22 A SA ON ON ai 23 AA AA o A ade oie dee aehamncaeeas 23 A SG Emor NO MICA LO Maa A AA AA 24 ANO IWORK Se vVICO ata da td ta dota ll id data dede ada daras ruda dies 25 oe ak Oe ZU SA AAA Re re Ce ER A A IA 25 46 2 BONUS SUN O caca E T EEA 25 NS AP benastit a Analdsiek tread taiiawlenteus E auatesuca
13. asic Control Panel Personal Info Step 1 3 Wizard 5 Add User Add User Add Group UserName ENM Add Share Password ese soo Please type your password again Description optional O Create Shared private Folder Shared Private Folder Location mnvjide4 O Enable Quota of MB ma ac K 2 User Management Add remove this user to from an existing group D PLANET 1 Bay SATA NAS Basic Control Panel Personal Info Step 2 3 Wizard 5 Add User User Management enm Gro Add Group Member Non member Add Share quest share Sucka END E eeu 13 3 Share Permission Set user permission of each shared directory Select a share name from the Access Denied column and click Read Only or Writable to allow user access right Select a share name from the Access Granted column and click Remove to disable user access right from this directory 3 PLANET 1 Bay SATA NAS Basic Control Panel Personal Info Step 3 3 Wizard gt Add User Share Permission enm Add Group Access Granted Add Share lt lt Read Only Remove gt gt 4 2 3 Add Group To add group support select the Add Group chapter for setting Please refer to Users and Groups chapter for more detail 1 Add Group Set up group name D PLANET 1 Bay SATA NAS Basic Control Panel Personal Info
14. ck Delete Group button to delete an existing group You can also add or remove users from an existing group by selecting a group name and clicking the Members button D PLANET 1 Bay SATA NAS Basic Control Panel Personal info Logout _A im U Group Management gt User Management guestshare planet zz END LIST zzz gt Group Management Existing Groups Group Name 4 4 File and Print 4 4 1 File Server 3 PLANET 1 Bay SATA NAS Basic Control Panel Personal Info e as User File Server Setting gt User Management a Manedaren Character set Traditional Chinese CP950 v am File Windows Setting gt File Server Enable gt Share Management Workgroup WORKGROUP gt Printer Server Description NAS 7101 WINS Server Optional I FTP Server Setting Enable y Enable FTP with TLS O Port Number 21 NFS Server Setting Enable as Guest Access Setting Enable y Enable Quota O Guestuser Quota MB Character Set Select your preferred character set Windows Setting Check Enable box to enable Microsoft Network connection Set Workgroup name for Microsoft Clients to access You can find this Workgroup name in My Network Places Set Description name for Microsoft Clients to access You can find this Description name in My Network Places Entire Network Microsoft Windows Network Workgroup 18 na
15. ead Only guestshare Aguestshare planet gt File Server gt Share Management gt Printer Server E e dm Syste y mm Ne The prefix denotes Group Name Save Cancel Windows and FTP Access Select a share name from the Access Denied column and click Read Only or Writable to allow user group access right Select a share name from the Access Granted column and click Remove to disable user group access right from this directory Check the box Grant access to all will enable writable permission of this directory to all users groups 19 D PLANET 1 Bay SATA NAS Basic Control Panel Personal Info NT NFS Access sharefolder gt User Management A O Grant access to all gt Group Management Allowable IP Subnet 5 gt File Server Gad Os a 5 Share Management Subnet y gt Printer Server NFS Access Set IP access permissions of this shared directory in Unix like environment Input IP Address and click Add to add this IP to the allowed list Input Subnet the start of allowed IP address before the slash the end of allowed IP address after the slash and click Add to add this subnet section to the allowed list Check Grant access to all box to enable NFS access of this directory to all users 4 4 3 Printer Server D PLANET 1 Bay SATA NAS Basic Control
16. ed by the manufacturer Add Printer Wizard del Select the manufacturer and model of your printer If your printer came with an installation disk click Have Disk IF your printer is not listed consult your printer documentation for a compatible printer A Manufacturer A Printers Sofa z Alps Apollo Apple APS PS AST w j Cancel Insert the driver disk into your local computer Click the Browse button to select the corresponding INF file in the driver disk Click OK to proceed on installation Install From Disk Insert the manufacturer s installation disk and then OK A make sure that the correct drive is selected below m Copy manufacturer s files from AE J Click OK to proceed on installation Add Printer Wizard y aL Select the manufacturer and model of your printer If your printer came with an installation disk click Have Disk If your printer is not listed consult your printer documentation for a compatible printer Printers EPSON AL C1100 Advanced Tell me why driver signing is important _Have Disk A Connecting to lp on your hostname dialogue box will pop up during the installation process The installation process may take several minutes to complete please wait Connecting to lp on your hostname Cancel 35 When the installation process is complete a lp on your hostname window will be shown Now you can print documents using
17. ert Explore You may also want to CS Printe Search ows installed printers and fax Search this computer for files your hostname Map Network Drive El Search the Internet Cut Copy Create Shortcut Properties 32 5 A Map Network Drive dialogue box will be shown Specify a drive letter for the folder chosen and click Finish button to complete mapping 6 A Connect to Your Hostname dialogue box will be shown Input a username and its password your previously set in Control Panel gt File and Print gt Windows and FTP Access You can enable automatic login process in the future by checking the remember my password box You will need to input the username and its password again each Map Network Drive Windows can help you connect to a shared network folder and assign a drive letter to the connection so that you can access the folder using My Computer Specify the drive letter for the connection and the folder that you want to conmect to Drive Folder Example server share Reconnect at logon Connect using a different user name Sign up for online storage or connect to a network server time you tried to access this network drive if the remember my password box is left unchecked User name user Connect to Your Hostname gt f Connecting to Your hostname Password e C Remember my password 7 The selected fo
18. ess of administrator s PC Pop up Machines 24 4 6 Network Service 4 6 1 DHCP Server If there is no DHCP server present this device will automatically turn on its DHCP server function D PLANET 1 Bay SATA NAS Basic Control Panel Personal info s DHCP Server Setting Enable Server y DHCP Client Setting gt DHCP Server Subnet Mask optional gt Bonjour Default Gateway optional Secondary DNS optional Others DNS optional DHCP IP Address Start 192 168 0 2 DHCP IP Address End 192 168 0 50 Maximum Lease Time 1 day DHCP Tease a im enance Primary DNS optional 4 6 2 Bonjour Setting If enabled then the user can listen music that stored in the NAS via Tunes client D PLANET 1 Bay SATA NAS Basic Control Panel Personal Info Bonjour Setting Enable O Tunes Enable gt DHCP Server OR ey 25 4 6 3 TorrentFlux TorrentFlux is an open source bit torrent client Check Enabled box to perform TorrentFlux Click Save button to save check box status Click Link to bt button to open TorrentFlux in another browser window Visit http www torrentflux com for more information of this program D PLANET 1 Bay SATA NAS Basic Control Panel Personal info TorrentFlux Enabled The login window of TorrentFlux will appear Default login username password is mysql 123456 A TorrentFlux Microso
19. fault or type the host name or IP address or domain name of the NTP server in User Define box 4 5 3 Turn Off Server J PLANET 1 Bay SATA NAS Basic Control Panel Personal Info Turn Off Server To restart the server click the Restart button To turn off the server click the Turn off button LAN Settings Time Settings gt Turn Off Server Information Disk Usage Error Notification To restart NAS 7101 click the Restart button To power off NAS 7101 click the Shutdown button 22 4 5 4 Information D PLANET 1 Bay SATA NAS Basic Control Panel Personal Info System Information Product Name NAS 7101 Firmware Version 2 6 3 n 20080320 Product Vendor PLANET Technology Corporation gt Time Settings IP Address 192 168 0 100 gt Turn Off Server gt LAN Settings gt Information Disk Usage Error Notification Display system information 4 5 5 Disk Usage D PLANET 1 Bay SATA NAS Basic Control Panel Personal Info Disk Usage Last Checked 1 1 2007 12 24 00 Please select statistics information Disk Name Capacity Used Free Disk Usage LAN Settings Time Settings fdewhdd 299851MB 128MB 299722MB 0 Turn Off Server information gt Disk Usage Error Notification Display HDD usage total disk size used disk size and user s quota information 23 4 5 6 Error Notification PLANET 1 Bay SATA NAS Basic am Users and Gro
20. ft Internet Explorer SEE ar File Edit View Favorites Tools Help Q Baci x E A yo Search Pp Favorites R ee 3 Address E http 192 168 0 100 8080 bt login php v ES so Links TorrentFlux Login Username Password 26 TorrentFlux Torrent Links Online OL Browse Upload SlorrentFlux com Gmysal Offline em Psd tle Po Torrentspy RSS Torrents SiDrive Space Server Stats Who All eDirectory List My Directory URL for the Torrent File Specify the torrent file with which you need download files You can upload it from provide one HTTP FTP URL for it Torrent Details View the detailed information of the task Stop Torrent Stop the selected task Delete Delete selected tasks 27 4 7 Maintenance 4 7 1 Disk Utility Disk Utility shows device name type of file system volume mounted and disk mount status of the HDD installed in this device For a newly attached HDD formatting is required before any further operation Y PLANET 1 Bay SATA NAS Basic Control Panel Personal info Disk Utility Es q Sr za adi Encrypt Password Format a aistl Uiar Health Type Format Dencrypt fdevindd ext3 Imnt ide4 mounted ext y PASSED Detail zs Device Name Type Mount Point Status Disk Utility i Firmware Upgrade Save Configuration Restore Configuration Factory Reset Software Update E w w w w w Ep a
21. g File Hostname IP Address Setting Assign a name to NAS 7101 as the identification within your local area network Obtain IP Address NAS 7101 obtains an IP address automatically if a DHCP Automatically server is present in the local area network Use Following IP Fill in the IP address subnet mask and Default gateway Address information if they are assigned by your network administrator Obtain DNS Server NAS 7101 obtains a DNS Server address automatically if a Address Automatically DHCP server is present in the local area network Use Following DNS Fill in the DNS server addresses if they are assigned by your Server Address network administrator 21 4 5 2 Time Settings Set current Date Time and Time zone Specify a NTP Server if you want to get date and time from Time Server D PLANET 1 Bay SATA NAS Basic Control Panel Personal Info Time Settings Date Month 1 M Day 1 M Year 2007 Y Time Hour 12 Y Minute 22 PM J Time Zone GMT 08 00 Taipei Y NTP Server Default None J O User Define gt File Server gt Share Management gt Printer Server gt LAN Settings O Time Settings Save Update Time Turn Off Server Information Disk Usage Error Notification Date 8 Time Click this option to set time and date manually Time Zone Set the time difference from Greenwich Mean Time in the area where the device Is installed NTP Server Select de
22. iguration file to your PC To save the server configuration click the Save button gt Disk Utility gt Firmware Upgrade gt Save Configuration Restore Configuration Factory Reset gt Software Update 4 7 4 Restore Configuration You can restore system configuration from a previously saved config file saved by Save Configuration function Specify a config file and then click the Restore button to restore previous settings D PLANET 1 Bay SATA NAS Basic Control Panel Personal info Restore Configuration You can Restore Upload a previously saved configuration file from your PC To restore the server configuration select the file you wish to restore and click the Restore button Restore File EBrowse Disk Utility Firmware Upgrade Save Configuration J Restore Configuration Factory Reset Software Update 29 4 7 5 Factory Reset Factory Reset resets all configurations to factory defaults All users networking and other configurations will be lost once the Factory Reset button is pressed Y PLANET 1 Bay SATA NAS Basic Control Panel Personal Info Factory Reset To restore the factory default settings click the Factory Reset button Caution You will lose all user data gt Disk Utility Firmware Upgrade Save Configuration Restore Configuration gt Factory Reset Software Update 4 7 6 Software Update Select an installation module and click U
23. indow will appear 2 Input the hostname of this device in the Computer Name column which you set previously in Control Panel gt System gt LAN Settings gt Hostname chapter or you can also input the description of this device which you set previously in Control Panel gt File and Print gt File Server gt Windows Setting gt Description Click the Search button and you will find search results in the right column F Search Results Computers File Edit View Favorites Tools Help ae sak j z S P search E Falters ii Address ID Search Results Computers he Go Search Companion x Name In Folder MY NAS Your hostname Workgroup Which computer are you looking for Computer name your hostname You may also want to WD Search this computer For files a Search the Internet 3 Double click on the computer icon You can also access this device directly by inputting your hostname in the URL bar of an Explorer window 4 Right click on the folder you want to map and select Map Network Drive P MY NAS Your hostname SEE hd File Edit View Favorites Tools Help Q sack Y wi O search gt Folders Ezi Address Your hostname he Go Search Companion x Name Comments admin 2 guest share Folder Share For quest Which computer are you looking for c lp Generic dot matrix printer entry Computer name 2 public Folder Share for public 2 test Open e us
24. lder will now be shown in My Computer You can then access it like a local hard drive My Computer Dak Fie Edit View Favorites Tools Help Y Rok AY Y p search Folders 237 Address My Computer System Tasks View system information Y Add or remove programs G Change a setting Other Places My Network Places My Documents E Shared Documents G Control Panel Details My Computer System Folder Files Stored on This Computer ol Shared Documents Hard Disk Drives ol nidor s Documents s lt WinXP EN C S My DATA D amp DATA 220GB E Sy DATA 372GB F Devices with Removable Storage H 314 Floppy 4 gt CD RW Drive 3 Network Drives public on Wav Nas Sf our hostname Z 33 6 Printer Setup in Windows XP You can enable access of a network printer to members in the same LAN environment We will show you an example of this operation in Windows XP For other operation systems please refer to their manuals of respective manufacturers Take the installation of EPSON AcuLaser C1100 printer as an example 1 Connect the USB printer to NAS7101 with the printers USB cable directly The printer will be automatically detected by NAS 7101 D PLANET 1 Bay SATA NAS Basic Control Panel Personal Info User Printer Server Setting mm File sate Enable gt File Server Printer Name usblp0 gt Share Management Description EPSON U
25. makes no commitment to update or keep current the information in this User s Manual and reserves the right to make improvements to this User s Manual and or to the products described in this User s Manual at any time without notice If you find information in this manual that is incorrect misleading or incomplete we would appreciate your comments and suggestions CE mark Warning There are class A and class B device In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Trademarks The PLANET logo is a trademark of PLANET Technology This documentation may refer to numerous hardware and software products by their trade names In most if not all cases these designations are claimed as trademarks or registered trademarks by their respective companies WEEE Regulation To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment end users of electrical and electronic equipment should understand the meaning of the crossed out wheeled bin symbol Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately Revision User s Manual for PLANET 1 Bay SATA NAS Server Model NAS 7101 Rev 1 0 April 2008 1 Table of Contents ATE OGG IO A A A ME oe OE E OS 1 Rey Petter dano 1 12 Package COS o o e e e a o 1 Fans Name an d F
26. matic Es Show f Built in Ethernet Manually Using DHCP with manual address Configure PV MUS Reais 4 Using BootP thernet gt Renew DHCP Lease Off if required Router DNS Servers Optional Search Domains Optional IPv6 Address fe80 0000 0000 0000 0230 65ff fe6f fde6 37 The private IP address acquired from the DHCP server is now displayed in this window You can find the IP Addresses of this Mac and of this device are within the same LAN environment Location Automatic 43 h Show Built in Ethernet 44 cP yi PPPoE AppleTalk Proxies Ethernet Configure IPv4 Using DHCP IP Address 192 168 2 2 Subnet Mask 255 255 255 0 DHCP Client ID if required Select Go gt Connect to Server in the menu bar Finder File Edit View MB window Help Back Forward Enclosing Folder Computer Home Network A iDisk A Applications Utilities Recent Folders Go to Folder Connect to Server 3K The Connect To Server window will be shown Inout smb NAS IP and then click Connect 8600 Connect To Server Server Address smb 192 168 2 1 Favorite Servers Remove Browse Econnect A Connecting to smb NAS IP progress bar will be shown first followed by the SMB Mount window Select a folder ex admin in the Select a share pop up menu and then click OK SMB Mount a Select a share v1 2
27. me Define Windows Internet Server Name IP address if necessary FTP Server Setting Check Enable box to enable FTP server function with default port 21 NFS Server Setting Check Enable box to enable NFS server function Guest Access Setting Check Enable box to allow users using guest share directory 4 4 2 Share Management D PLANET 1 Bay SATA NAS vid Basic Control Panel Personal Info Logout fa Users and Group Share Management gt User Management public gt Group Management acess A e aa intel z HET in File and Print Existing Shares Ed gt File Server gt Share Management A Share Name gt Printer Server o A Description Optional a Net Windows FTP Access NFS Access Delete Share A pri A ae Li Creating Share Fill out the Share Name box and then click the Save button to create a new share name Property Change You can modify properties of an existing share name Select a share name in the Existing Share column and click Windows FTP Access or NFS Access button to set or remove read write permissions of the selected directory Delete Share Check Delete Share to delete a specified share name PLANET 1 Bay SATA NAS Basic Control Panel Personal info A z a Windows FTP Access sharefolder es Ei OD Grant access to all Access Granted Access Denied lt lt R
28. n Taipei Taiwan R O C is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility 89 336 EEC 92 3 1 EEC 93 68 EEC For the evaluation regarding the Electromagnetic Compatibility the following standards were applied EN 55022 2006 Class B EN 61000 3 2 2000 Al 2001 EN 61000 3 3 1995 Al 2001 EN 55024 1998 A1 2001 A2 2003 IEC 61000 4 2 1995 A2 2000 IEC 61000 4 3 2002 IEC 61000 4 4 1995 A2 2001 IEC 61000 4 5 1995 Al 2000 IEC 61000 4 6 1996 Al 2000 IEC 61000 4 8 1993 Al 2000 IEC 61000 4 11 2004 Al 2000 Responsible for marking this declaration if the Manufacturer C Authorized representative established within the EU Authorized representative established within the EU if applicable Company Name Planet Technology Corp Company Address 11F No 96 Min Chuan Road Hsin Tien Taipei Taiwan R O C Person responsible for making this declaration Name Surname John Sung Position Title Product Manager E nd o Lo Taiwan 2 Apr 2008 Place Date Legal Signature PLANET TECHNOLOGY CORPORATION e mail sales planet com tw _ http www planet com tw 11F No 96 Min Chuan Road Hsin Tien Taipei Taiwan R O C Tel 886 2 2219 9518 Fax 886 2 2219 9528
29. n Internal Cooling Fan for Continuous Operation e 2 Standard USB 2 0 Port for External USB HDD and Print Server Sharing e Supports Windows Utility and Web Base Manage Internet e Share Music Pictures Movies and Data over Network e Supports BT Download e Interface 10 100 1000 Base TX Auto MDI MDI X supports auto crossover detection e Supports most popular OS including Windows VISTA XP 2000 Mac OS x v10 2 1 or above Linux 1 2 Package Contents NAS 7101 x 1 Power Adapter x 1 RJ 45 Cable x 1 CD Disk x 1 Quick Installation Guide x 1 NOTE 1 If any of the above items are missing please contact your dealer immediately 2 Using the power supply that is not the one included in NAS 7101 packet will cause damage and void the warranty for this product 2 Parts Name and Functions 1 Power LED 2 Front cover 3 Power button 4 Ethernet port 5 USB host ports 6 Reset key 7 Security Slot 8 DC In jack 9 Activity LED yellow 10 Link LED green 11 Plastic Upper Frame LED Name Operating Status NAS Accessing Blinking in blue Linked to the Ethernet Link LED Disconnected from the Ethernet Accessing the Ethernet Activity LED 2 Power LED QAMOO Power and access blue Booting up or reset orange Covers the opening of the housing Push to turn on or off NAS 7101 Connects to the Ethernet cable with RJ 45 connector Connects to USB printers and USB Storage Devices P
30. onnect USB printer s or USB storage device s to this device with USB cable s NAS 7101 can automatically mount the USB devices connected Connect the power supply to NAS 7101 O Press the Power button to turn on NAS 7101 The orange LED on the front cover will light up during booting up NAS 7101 will be ready to use when the blue LED lights up steadily 2 3 Removing Connection 2 3 1 Removing USB Mass Storage Devices NAS 7101 wills auto mount a USB Storage Device connected to it But you need to manually unmount the USB Storage Device before disconnecting it You can unmount a USB drive by Control Panel gt Maintenance gt Disk Utility gt clicking Umount button 2 3 2 Removing USB Printer You have to unmount the printer before disconnecting it You can unmount a USB printer by Control Panel gt File and Print gt Printer Server gt Unchecking Enable box 2 3 3 Removing Power connection Press the Power button to turn off NAS 7101 and then remove its connections 3 Setup Wizard NOTE This Setup Wizard is offered by the chipset vendor STORLINK to make easy to set up NAS 7101 Insert the bundled CD into the CD ROM drive to launch the autorun program Once completed a welcome menu screen will appear Click the Setup Wizard hyperlink you will see the Setup Wizard dialog box as below Click Setup to continue NOTE If the welcome screen does not appear click Start at the
31. pload button to install it on this device PLANET 1 Bay SATA NAS Basic Control Panel Personal info Install Manually Path Browse Disk Utility Firmware Upgrade Save Configuration Restore Configuration Factory Reset gt Software Update 30 4 8 Personal Information 4 8 1 Account Account is the only section in Personal Information You could change the password of user admin and the language of the GUI Besides share list system disk quota and the percentage of disk used will be shown as well Q PLANET 1 Bay SATA NAS Basic Control Panel Personal Info Install Manually Path Browse gt Disk Utility Firmware Upgrade Save Configuration Restore Configuration Factory Reset gt Software Update 4 8 2 Logout Click Logout to logout off this device 31 5 Mapping a Network Drive in Windows XP After mapping a specific folder as a Network Drive you can access it easily in My Computer We will show you an example of this operation in Windows XP For other operation systems please refer to the manuals of their respective manufacturers A USB external drive connected to this device will be seen as your hostname usb1 or your hostname usb2 in Windows Explorer You can also map it with the following steps 1 Click Start button in Windows taskbar gt Click Search gt Click Computer or people gt Click A computer on the network and a new w
32. ress 10 sec to restore factory default Connects to a lock pin Connects to the AC adapter Activity status of Ethernet Link status of Ethernet Covers the groove and screws on the top of NAS 7101 LED Definition LED Color 2 1 Assemble of the Hard Disk Drive 1 Extract the plastic upper frame by sliding it out the gape on the top of the case 2 Unfasten the screw on the lower part of the front cover Remove the front cover by lifting the clip with a flat screw driver 3 Place the device horizontally align the hard disk drive with the PCB board Push slowly and gently to the most inside until the hard disk drive is firmly seated 4 Assemble the enclosure by fastening the screws on both top and bottom sides 5 Attach the front cover to the case and secure the screw on the lower part 6 Restore the plastic upper frame by sliding it into the gape on the top of the case Make sure the plastic upper frame matches the direction 2 2 Connection and Removing Connection 2 2 1 Network Connection Connect NAS 7101 and a Switch Hub Router or a computer with a RJ 45 Ethernet cable 0 Connect the power supply to NAS 7101 Press the Power button to turn on NAS 7101 The orange LED on the front cover will light up during booting up This device will be ready to use when the blue LED lights up steadily Connect NAS 7101 and a Switch Hub Router or computer with a RJ 45 Ethernet cable 8 C
33. s directory to all users B PLANET 1 Bay SATA NAS Basic Control Panel Personal Info A ON Step 3 3 ps gt Wizard gt Add User NFS Access sharefolder gt Add Group O Grant access to all ORC EE Allowable IP Subnet TP r 1 Add gt Address l I L H IL H o i 4 3 Users and Groups 4 3 1 User Management All existing users in this system will be shown in this menu You can create a new user by filling out the form and clicking the Save button Select an existing user and click Delete User button to delete an existing user Select an existing user and click Groups button to enter Group Management menu Check Create Private Folder box for creating a home directory of this user Y PLANET 1 Bay SATA NAS Basic Control Panel is A A im Users and Grou User Management gt User Management gt Group Management TER quest share Existing Users 7 END LIST User Name Password Please type your password again Description optional O Create Shared private Folder Shared Private Folder Location mnt ide4 _ O Enable Quota of MB 17 4 3 2 Group Management All existing groups in this system will be shown in this menu You can create a new group by filling out the form and clicking the Save button Select an existing group and cli
34. taskbar Then select Run and type D Utility setup exe assume D is your CD ROM drive Network Storage Link Setup Wizard v1 60 STORLINK EMPOWERING NETWORK STORAGE Press Search again button Setup Wizard will list all network storage in your LAN environment Please check next section Please select your network storage and press OK User can setup IP address day and time step by step Network Storage Link Setup Wizard Step 1 If you have one Network Storage Link you can make changes to the following settings if you have more than one Network Storage Link you will need to run the Setup Utility again to configure each separate Network a Storage Link Server Name NAS 7101 IP Address Subnet Mask Default Gateway DNS Server Search again MAC Address Please enter password Default password is admin Then click OK Verify admin password Please enter current admin Cancel You can select Set IP configuration manually and enter the IP settings Or select Automatically obtain an IP address DHCP when there is a DHCP server in your network Network Storage Link Setup Wizard Step 2 E nas 7101 192 168 0 100 200 mood a 0 You may change the time zone date and time to your network storage and press Next to continue Network Storage Link Setup Wizard Step 3 GMT 08 00 Taipei 2 01 51 PM This page shows the new configura
35. tene tan ieeud ananisusdaanats 26 A O 28 A e E en o Tee ern eee ee ne ene ae 28 A A AP 28 A EE 29 4 7 A Restore ConiguratlOn serae a da 29 A io Factor ROSSO kannn a a uditean sia sua den uths gia onatcabaledbenaaianateacinens 30 4 7 6 Software Update cccccccccccesssccssseeececsscessseseeeeeecnccsseeseeeeecsccessenseeeeecoceseneeceeessseuecsseseeesessccceeeeneeees 30 AS Personal IO Malo catas 31 O a aco aunaa eaacee Meath eanncae isan 31 A OZ A ada Gnten a a a 31 Mapping a Network Drive in Windows XP ci A AAA aces aes 32 Printer Setup IM WINCOWS AR tostecs teissxcudedoaroscisestallacameeounisisdwandcenaatelsnadzanindeiagvare sasemwdaesuats lanedapaaedeaixeadedoanetatoostnageiea 34 Mounting SMB Server itt Mac OS Acortar 37 MOUNTING MB Server in LINUX foc oie NA A A AR 40 NGIWOrk ADDIIGAUONS cuicos dit tha ia a a di ad Ni A ADC ia hi dads 42 9 1 Personal Dala IAGO ista adi 42 92 NEWW File Said o o nl 42 OIE TR SOI CN crite tient o a tdi 43 OZ Printer Se VOR rd ds 43 0 USB Mass Storage DI e dede 44 EG Declaratio Mor OONO ti A A 49 1 Introduction Thank you for purchasing NAS 7101 lt is a flexible economical and powerful solution for your network storage application The following instructions will help you to learn more about the connections set ups and configurations of it 1 1 Key Features e The Administrator can Limit the Amount of Available Disk Space Available to Individual Users e Aluminum Enclosure with a
36. the printer installed Each member in the LAN will have to complete above installation before using this printer 2 lp on your hostname Printer Document View Help Document Mame Status Owner Pages Size Submitted Port 0 documentis in queue 36 7 Mounting SMB Server in Mac OS X First you have to make sure that local Mac and NAS 7101 are in the same LAN environment Then you can connect to NAS 7101 using SMB protocol by inputting a URL starts with smb 1 Click on the Apple Menu and select Location gt Network Preferences SnapNDrag File Edit View Options About This Mac Software Update Mac OS X Software Capture Window Help System Preferences Dock p Location y Automatic Location 10 12 07 12 16 AM Location 10 15 07 3 31 PM Recent Items Force Quit XRO Location 10 15 07 3 47 PM Location 10 15 07 3 53 PM Sleep Restart ELA Preferences Shut Down e Log Out Argosy TEQ 2 A Network window will show Select Built in Ethernet in the Show pop up menu E aan Network e 4416 g Show All Displays Sound Network Startup Disk Location Automatic B a Y Network Status Built in Ethernet address Built in Ethernet Network Port Configurations 2 Built in 3 Select Using DHCP in the Configure IPv4 pop up menu e 60 Network Wa O 7 Uam x Show All Displays Sound Network Startup Disk Location Auto
37. tions If it is correct please press Save button and the setting information will be save to your network storage Network Storage Link Setup Wizard Step 4 Old Settings Server Name NAS 7101 IP Address 192 168 0 100 Subnet Mask Default Gateway IP Status Date 2007 01 01 Time 12 01 51 You are about to change the settings Press OK to save new settings Press Cancel if you want to keep current settings You are about to change the settings Press OK to save new settings Press Cancel if you want to keep current settings Cancel Click Exit button to close Setup Wizard Network Storage Link Setup Wizard v1 60 4 Web based Management 4 1 Login Start the web browser on the computer and type the IP address of the NAS 7101 The Default IP http 192 168 0 100 Address El http 192 168 0 100 M ey Go Links The login window of NAS 7101 will appear Default login username password is admin admin J PLANET 1 Bay SATA NAS Username admin Password esses 4 2 Quick Setup 4 2 1 Wizard To setup basic configurations of NAS 7101 follow the diagram below 1 Language Setting Specify the language of this GUI D PLANET 1 Bay SATA NAS Control Panel Personal Info es Step 1 6 5 Wizard Add User Preference Language Setting admin Add Group Language English v l Preference Add Share Back 2 Password Se
38. tting Click Next to skip password change D PLANET 1 Bay SATA NAS Control Panel Personal Info os Step 2 6 gt Wizard gt Add User New Password Setting admin gt Add Group New Password eecccccccccccece gt Add Share CA Please type your password again NOTE If you do not wish to change the password click Next button to advance to the next step 10 3 Hostname Setting This hostname can be seen in My Neighborhood J PLANET 1 Bay SATA NAS Basic Control Panel Personal Info Step 3 6 an OB ire gt Add User Hostname Setting gt Add Group Hostname nas 7101 gt Add Share NOTE The Hostname is the name given to the server by which Window based machine may access 4 Internet Protocol Setting You may specify a stationary IP address DNS server address or enable the Obtain IP address DNS server address automatically checkbox depending on your LAN configuration D PLANET 1 Bay SATA NAS Basic Control Panel Personal Info Step 4 6 A meo 5 Wizard 168 100 Ao po Hz Add User Internet Protocol Setting PES ARN IP Address Obtain IP Address automatically al O Use following IP Address IP Address 1192 Subnet Mask Default Gateway l o 255 DNS Server Obtain DNS Server Address automatically O Use following DNS Server Address Primary EL LTL Secondary
39. ups File and Print Control Panel Personal Info Error Notification Setting Monitoring Services Setting LAN Settings Disk Usage O Time Settings Windows File Sharing Server C Turn Off Server FTP Server C Information Disk Usage an a System gt gt gt gt gt DHCP Server O Check Interval gt Error Notification an Network Service p gt as Maintenance am Log File Monitoring Service Setting Check Interval Email Notification Setting Pop up Notification Setting Interval Hourly Email Notification Setting Enable Q Error Handling Mail Server Error Handling Email Addresses Pop Up Notification Setting Enable Error Handling Pop Up Machine Name Save Disk Usage If the disk usage reaches 90 the system will inform the administrator Windows File If the SAMBA task goes wrong the system will inform the Sharing Server administrator FTP Server If the FTP Server task goes wrong the system will inform the administrator DHCP Server If the DHCP Server task goes wrong the system will inform the administrator You can select hourly or daily inform interval Enable Check this box to enable notification via email Error Handling Mail Server Specify a SMTP server for this device Error Handling Email Address Specify administrator email address Enable Check this box to enable notification via Windows pop up messages Error Handling Specify the IP addr
Download Pdf Manuals
Related Search