RRC-300-U - Nordic Printers AB
Contents
1. R on the counter will reset the count and restart the RRC 300 U OPERATION The RRC 300 U uses a state of the art ultrasonic fork detector that allows the RRC 300 U to count almost any type of labels including transparent labels The ultrasonic detector detects the labels by sensing the difference in thickness between the backing paper and the backing paper plus label The gap between two successive labels should at least of 2 millimetres mm The label should of minimum 5mm height the maximum width is 130mm The detector has been adjusted at the factory but may need to be re adjusted slightly for your labels The procedure for calibrating the detector is described in the enclosed sensor user manual The detector is normally set for dark switching A WARNING This Product is for indoor use only Not for use in wet locations IMPORTANT It is recommended to use the machine at its maximum speed Keep unwind plate clean of particles and glue LEFT SIDE CONTROL PANEL RESET The new left side control panel has three items The toggle switch reset is a momentary closing switch that has the same function as the reset button on the counter but is more convenient for the operator ADJUST Potentiometer TEST Green LED O ADJUSTING THE LABEL DETECTOR PHOTOCELL The photocell adjust is set at the factory fully clockwise It should require no field adjustment It is used only to detect the end of the paper2. roll MAINTENANCE Your RRC 300 U requires no maintenance WARRANTY The RRC 300 U Reel to Counter is backed by LABELMATE s famous 3 Year Parts and Labour Limited Warranty 1 Year Warranty on Power Supplies Counters and Encoders LABELMATE LLC 69 AVENUE ALPHONSE XIII 1180 BRUSSELS BELGIUM TEL 322 375 69 60 FAX 322 375 38 96 brussels labelmate com www labelmate com
3. RRC 3O00 U Universal Reel to Reel Counter e Variable Speed Control e 6 Digit Digital Pre set Counter e 300mm 12 Roll Diameter Remove all parts from the shipping container and verify contents Package Contents e User Manual this document e Sensor User Manual e RRC 300 U Unit e Power Supply Module e Separate User Manual for Counter Unit Retain the Shipping Container and Packaging for Storage and Transport e KEEP MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE e LABELMATE User_RRC 300 U 04 12 SPECIFICATIONS Max Label Roll Weight Max Label Roll Size 6Kg 13 2Lb 300mm 12 diameter Power Supply Input 220 240VAC 50 60HZz Output 24VDC 4 17A Speed Min 65cm sec with 76mm take up roll diameter SET UP 1 Plug the Power Supply Output Cable to the Power Jack on the Rear Panel of the RRC 300 U Plug the Power Supply into a suitable AC Power Mains Outlet Place the Power Switch on the rear of the RRC 300 U to the ON 1 position Observe that numbers are displayed on the Counter See the separate User Manual for the Counter Modules itself for other operations 2 The Counter is pre programmed as a Preset Count Up Counter If you want to use the preset function introduce the number of labels with the blue push button on the counter If you do not want to use preset set the value to 0 3 When the preset number of labels is reached the RRC 300 U will stop Pressing
Download Pdf Manuals
Related Search