Home

Blue&Me™ Nav

1. 35 Building the media library on Blue amp Me Nav 35 Building playlists for Blue amp Me Nav 35 FUNCTIONS OF THE NAVIGATION SYSTEM 36 Navigation display 36 Voice messages 36 Start navigation 37 New destination ceccesececceseeseeseesseeeeeeseeeeeeeas 38 Procedure for entering destination TOWN CITY 39 Operation for steering wheel keys during input of TOWN CITY name 39 Points OT amp serari 4 43 Resume navigation 44 Arrival Ipform fiGri acte tetra reuera 44 Stop sessies rereana cereo TUR Da Pn 45 Recent destinations 45 Navigation settings 22 22 2 46 Vehicle position ccce 50 Route simulation 50 SETTINGS FUNCTIONS ios acria ett nr eee 5 Pairing a mobile phone 5 Managing user data 54 Managing updates
2. Move the car to an open area where the GPS signal reception is good or wait until the obstacle has passed if the vehicle is moving CJ Wait at least 15 minutes to allow the system to calculate the correct GPS position again O Contact Alfa Romeo Authorized Services 93 BLUE amp ME nav BLUE amp ME nav 94 Problem The display indicates ROUTE CALCULATION NOT POSSIBLE It is not possible to call the telephone number for a point of interest e g Restaurant It is not possible to delete the list of RECENT DESTINATIONS Probable Cause The car is located in a country or region whose maps are not present on the USB device and the destination entered is not therefore available mobile phone registered is off O Your Bluetooth mobile phone is not registered O The registered mobile phone is not with in the system s radius of action it must be located within 10 metres of the system O The Bluetooth connection between the system and mobile phone has been disabled on your mobile phone Blue amp Me identifier J The telephone number of the selected point of interest is not available on the map Incorrect selection of the deletion function Possible Solution Ensure that the preloaded map software contains all the countries or regions required to define the required route from the car s current position to the destination Turn on the mobi
3. Press a and pronounce Artists Scroll the artist s albums To play all the albums of the required artist se lect PLAY ALL and then press OK or v To play an album select the re quired album and then press OK or To play a track select the title and then press OK or v Note If your USB device contains many audio files the ARTISTS menu can be subdivid ed into alphabetical sub menus Alphabeti cal sub menu can display just the first let ter of the tracks it contains e g A F or it can display the first two letters e g Aa Ar Selection by genre A To select the tracks of a special genre amp using manual interaction proceed as follows Launch the Main Menu select ME DIA PLAYER and then press OK or Select GENRES and then press OK or Scroll genres To play all the tracks of the displayed genre press OK or gt Or using voice interaction Press 22 and pronounce Genres Scroll genres To play all the tracks of the displayed genre press OK or Note If your USB device contains many audio files the GENRES menu can be subdivided into alphabetical sub menus Alphabetical sub menu can display just the first letter of the tracks it contains e g A F or it can display the first two letters e g Aa Ar nav BLUE amp ME BLUE amp ME nav 32 Selection by album To select an album using manual in teraction proceed as follows Launc
4. rw Qo BLUEXmME Ce nav The innovating Windows Mobile based Telematic Solution for the car CONTENTS OVERVIEW eee The hands free kit eese Message Medid player tet IENE The navigation system Road safety DISPLAY AND BUTTONS ON SOUND SYSTEM AND ON STEERING WHEEL HANDS FREE KIT QUICK REFERENCE GUIDE 1 Prepare E mobile pone phonebook Try out the voice commands Pair your mobile phone 1 Make a phone ca MESSAG READER QUICK REFERENCE GUIDE 1 MEDIA PLAYER QUICK REFERENCE GUIDE 1 1 1 1 1 NAVIGATION SYSTEM QUICK REFERENCE GUIDE HOW TO USE Blue amp Me Nav Steering wheel controls Voice COMMONAS ctt etse teinte Blue amp Nic Nav function menu HANDS FREE KIT FUNCTIONS 20 Making a phone 21 Incoming calls eesesssssssseseennn 24 Managing phone calls 25 Conference call functio
5. 57 Updating Blue amp Me Nav 57 Pausini the pd te ee 58 Using the phone during the updating procedure 59 Resuming the update 59 Advanced options cese 60 Accessing the device ID 60 Changing the GPRS code 60 Media player settings 61 SAUTODIOV exec tenete eects e DU 61 et nece e Lb LUE 62 RP 62 Exit the settings menu 63 Blue amp Me Nav SUPPORTED MOBILE PHONES 63 Mobile phones with Bluetooth wireless technology 63 Pull phones phonebook automatically downloaded 64 Push phones phonebook not automatically downloaded 64 Mobile phones with message reader 64 Supported USB memory devices 65 USB memory devices 65 Supported digital audio files 65 Supported playlist formats 66 VOICE COMMANDS KEYWORDS SUMMARY 67 Always available voice commands 67 Hands free phone kit voice commands 68 Message reader voice command
6. BLUE amp ME Note CJ For many tasks the steering wheel buttons OK and v can be used interchangeably and you can use the key that is more convenient for you to press C For both operating modes of steering wheel buttons short or long press the function chosen will be activated when you release the button These services may not be available when the car is to obtain information on availability and activation call Universal Freephone Number Alfa InfoMore 0080025320000 or consult the dedicated area www alfaromeo com 10 Controls SOUND SYSTEM Button VOL I gr CD Short press function less than 1 second Volume on off Long press function more than 1 second Adjust the volume of Blue amp Me Nav functions hands free kit message reader and media player voice announcements Select audio sources Radio CD CD Changer Media Player BLUE amp ME Nav BLUE amp ME nav 12 HANDS FREE KIT QUICK REFERENCE GUIDE To quickly get started with using the Blue amp Me Nav hands free kit with voice recognition and Bluetooth wireless tech nology 0 Prepare your mobile phone phonebook Turn the ignition key to MAR CJ Try out the voice commands CJ Pair your mobile phone O Make a phone call gt Instructions for each of the above func tions are given in the following paragraphs PREPARE YOUR MOBILE PHONE PHONEBOOK Before creating a pairing rela
7. WARNING Operating certain parts of this system while driving can distract your attention away from the road and pos sibly cause an accident or other serious consequences Do not change system settings or enter data non verbally using your hands while driving Stop the car in a safe and legal manner lors attempting these operations This is impor tant since while setting up or changing some functions you might be required to distract your attention away from the road and remove your hands from the wheel GENERAL OPERATION Voice Command Control functions within the system may be accomplished using only voice commands Using voice commands while driving al lows you to operate the system without removing your hands from the wheel Prolonged Views of Screen do not access any function requiring a prolonged view of the screen while you are driving Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention Even occasional short scans to the screen may be hazardous if your attention has been diverted away from your driving task at a critical time Volume Setting do not raise the volume excessively Keep the volume at a level where you can still hear outside traffic and emergency signals while driving Driving while unable to hear these sounds could cause an accident Use of Speech Recognition Functions speech recognition software is inherently a statistical process which is subject to er
8. to view the dif ferent phone numbers and then select the required one by or V and press OK or v to start the call To end the phone call press v for longer than 1 second 21 BLUE amp ME Nav BLUE amp ME Nav 22 ay Or using voice interaction Assume you would like to call the con tact John in your mobile phone phonebook Press and pronounce Call John or Call John on at Mobile in the previous statement the keyword Mobile represents the type of phone number you would like to call The phone number type can either be at Home at Work or on at Other If the name is recognized the system will display the recognized contact s information John in the example on the display screen If John has just one phone number the system will ask if you would like to call John To start the call say Yes otherwise say No If John has several phone numbers the system will ask which phone num ber you would like to call e g Call John at Work or at Home An swer with the type of required phone number e g at Home If John has several phone numbers but the location i e the type of phone number like work home etc is missing the system will display the selected contact and a list of related phone numbers To call the displayed phone number pronounce Call If the contact is correct but the phone number is wrong you c
9. CJ advice on connection to an iPod CJ files in the 9 voice recognition languages available that can be downloaded onto Blue amp Me Nav Italian French Eng lish German Spanish Portoguese Dutch Polish Brazilian Portoguese Push phones phonebook not automatically downloaded Push phone means that your mobile phone supports the single contact download with Bluetooth wireless technology Dur ing the pairing procedure you will be re quired to send phonebook contacts from your mobile phone your phonebook is not automatically downloaded during the phone pairing procedure Mobile phones with message reader not all mobile phones support listening to incoming SMS messages If your mobile phone can send messages through the Bluetooth wireless technol ogy it is possible to read incoming messages through the Blue amp Me Nav hands free kit to store them in the dedicated inbox or to delete them SUPPORTED USB MEMORY DEVICES USB memory devices Supported digital audio files The media player supports most of the USB The media player supports audio files with the following formats memory devices 1 0 1 1 or 2 0 With Blue amp Me Nav media player the fol lowing USB devices are recommended Audio coding JM Travel Driver 256 MB USB 2 0 ma It supports standards WMA release 1 and WMA release 2 WMA2 353 WMAT 352 It supports audio formats WMA CJ Memorex Travel Driver 1
10. Once you have heard the system mes sage say Navigation settings Blue amp Me Nav will display a list of the available options The available options are O Type of Route Use this option to tell Blue amp Me Nav whether you want the calculated route to be FASTER or SHORTER A Using manual interaction proceed as follows Select the TYPE OF ROUTE option and then press OK or v Select the required option using the or Y keys and press OK or v to confirm Or with voice interaction Press a and say Type of route Blue amp Me Nav will tell you the current setting using voice synthesis and will ask you if you wish to change it Answer Yes to change the op tion No to maintain the current setting We J Set motorways Use this setting to tell Blue amp Me Nav if you wish to give preference to motorways when calculating the route With manudl interaction proceed as follows Select the SET MOTORWAYS op tion by pressing OK or v Select YES or NO using the A or W keys and press OK or v to confirm Or with voice interaction Press 229 and say Set motor ways Blue amp Me Nav will tell you the current setting using voice synthesis and will ask you if you wish to change it Answer Yes to change the option No to maintain the cur rent setting ay Set ferries Use this setting to tell Blue amp Me Nav whether you wish to i
11. You can also see the list of all the categories available by saying the word List Note g You can set POI alert on max POI cat egories The distance set for the nearness alert is valid for all categories selected g Follow the instructions below to disable all the alerts previously set Y with your hand select DISABLE ALL on menu POI ALERT Push OK o v to confirm Or vocally by saying DISABLE ALL on the POI ALERT menu Answer Yes to confirm 49 BLUE amp ME nav BLUE amp ME nav 50 O Restore settings Use this setting to restore the initial navi gation system settings _ With manual interaction proceed as 0 follows Select the RESTORE SETTINGS option by pressing OK or v Select YES or NO using the A or W keys and press OK or v to confirm Or with voice interaction Press af and say Restore set tings Blue amp Me Nav will ask you whether you wish to restore the initial factory settings by means of voice synthesis Answer Yes to pro ceed No to keep the current set tings ay Vehicle position This function allows you to find out the car s exact position expressed as a latitude North South and longitude East West shown on the reconfigurable multifunction display This function also provides infor mation on the number of GPS satellites re ceived by Blue amp Me Nav A To find out the vehicl
12. bile phone gt For further information read chapter SET TING FUNCTIONS PAIRING YOUR MOBILE PHONE O To activate the hands free kit the ignition key shall be at MAR If during a phone call you turn the igni tion key to STOP you can continue your conversation through the hands free kit for other 15 minutes MAKING A PHONE CALL You can make a phone call using one of the following methods Calling a contact in your phonebook mands bile phone keypad ry last calls sage gt for further information refer to chapter FUNCTIONS OF SMS MESSAGES READ ER paragraph SMS MESSAGES MAN AGEMENT Dialling a phone number using voice com Dialling a phone number using the mo Calling a phone number using call histo CJ Call the sender of a received SMS mes Calling a contact in your phonebook It is a requirement that you create a pair ing relationship and download your mobile phone phonebook to the hands free phone system to use this dialing feature To call a contact in your phonebook amp using manual interaction proceed as follows Press v to open the Main Menu Select PHONEBOOK and then press OK or 5 Press A or V to select the alpha betical grouping which your contact s name belongs to press OK or v and then select the required contact If the contact has just one phone num ber press OK or v to start the call If the contact has multiple phone num bers press OK or
13. the number of audio files stored on your USB device Disable on the USB device such function 87 BLUE amp ME nav BLUE amp ME Nav Problem Displayed message NO PLAYLISTS FOUND Or Blue amp Me Nav says No playlist found amp Displayed message INVALID PLAYLIST um ERE EMPTY PLAYLIST Or Blue amp Me Nav says Empty playlist Displayed message BAD MEDIA Indication on sound system display MEDIAPLAYER in absence of USB device connected to the car USB port Probable Cause No playlist is stored on the USB device connected oisi cer M in the playlist O The wpl file is too large for Blue amp Me Nav memory capacity CJ The playlist does not contain references to media files on your USB device Digital audio file is damaged or invalid 7 from the car USB port with the ignition key at STOP Possible Solution Build a playlist on your computer using your media file software and then copy it to your USB device CJ Make sure the playlist is in m3u or wpl format CJ Build the playlist again following the instructions given in section PLAYLISTS FOR Blue amp Me Nav PRACTICAL HINTS CJ If the problem persists delete the playlist from Your USB device CJ Delete the playlist from your USB device or copy media files to the playlist using your media file software O Reduce the number o
14. tifunction display in the event of future map software updates these will allow you to set particular types of numbering that require the use of alphanumerical characters Points of interest This function gives you access to a file con taining information on the location of use ful destinations of general interest divided by category e g hotels restaurants chemists airports railway stations autho rised workshops etc To use this function your USB device with the preloaded map software must be con nected to the USB port on the car A To select a Point of interest using man ual interaction Activate the main Menu select the NAVIGATION option and then press OK or Select the option NEW DESTINA TION by pressing OK or v Select POINTS OF INTEREST and press OK or v to confirm 41 BLUE amp ME nav BLUE amp ME nav 42 Blue amp Me Nav will display a list of available points of interest categories Choose the required category from those stored in the map software on your USB de vice using the A or W device and press OK or v to confirm Blue amp Me Nav allows to customize the list of categories of the points of interest by means of the Personal point of inter est See Blue amp Me Nav Mop Assistant Guide in the Blue amp Me Nav navigation kit for detailed instructions on how to load the points of interest on your USB Select PERSONAL POI on the points of interes
15. COMMANDS KEY WORDS SUMMARY iPod To improve the connection of your iPod with Blue amp Me Nav it is usually nec essary to carry out these few simple oper ations on your iPod O configure the iPod for use an an ex ternal disc referring to the iPod in struction manual O if the configuration has been made on an Apple PC make the configuration in Win dows format J memorize the music tracks as files not protected from copying These operations do not adversely affect listening quality or using tracks managed by an iPod iPod compatibility What can do Listen to MP3 tracks in digital quality Select tracks by artist album type etc through voice control or by using the con trols on the steering wheel Memorize music Display information about the track being played song title singer etc on the instrument panel Recharge your iPod through the USB What cannot do Play audio tracks in ACC m4a m4p and mp4 format Play audio tracks purchased from iTunes or ones with digital protection DRM Play audio tracks from iPod touch or iPhone devices PRACTICAL HINTS FOR USING THE MEDIA PLAYER O To optimize scrolling of the FOLDERS menu organize folders on your USB de vice before connecting it to Blue amp Me Nav To facilitate and to optimize FOLDERS menu selection organize your tracks in folders with prompt names for
16. GB USB 2 0 Voice O SanDisk Cruzer Micro 256 MB USB mp3 File MPEG 1 Layer 3 sampling frequencies 32 kHz 44 1 kHz 2 0 and 48 kHz and MPEG 2 layer 3 16 kHz 22 05 kHz e 24 A TM Mini kHz The following bit rates are supported 16 kbps 32 kbps a me AS MB TUB 64 kbps 96 kbps 128 kbps and 192 kbps It also supports Fraunhofer extension MP2 5 O Lexar JumpDrive 2 0 512 MB sampling frequencies 8 kHz 11 025 kHz and 12 kHz O PNY Attach 256 MB USB 2 0 wav Digital audio file without data compression T Sony Micro Vault te A AE T E Ui OE E EE Note Note The media player does not support audio files compressed with other formats e g aac It is advisable not to use USB devices equipped and DRM Digital Right Management protected audio files ACC files downloaded from with the password function If the USB de iTunes and MP4 Non supported audio files that may be present on USB device will be vice is equipped with this function always en ignored sure that the function is disabled The media player supports just one media li brary When connecting a new USB device Blue amp Me Nav will build a new library replacing the existing one Nav BLUE amp ME BLUE amp ME Nav 66 Supported playlist formats The media player supports the following playlist formats CJ m3u file containing a list of tracks re lease 1 and 2 CJ wpl Windows based file
17. Now Playing List As In field File Name enter the required name and in field Save as type set the type wp or m3u Click on Save When the above steps are over the new file m3u or wpl will be built 35 BLUE amp ME nav BLUE amp ME nav 36 FUNCTIONS OF THE NAVIGATION SYSTEM Blue amp Me Nav leads you to your cho sen destination quickly and safely by means of its navigation function by means of voice synthesis and pictograms that appear on a reconfigurable multifunction display on the control panel The navigation system allows you to navigate towards a destination ad dress to call up programmed destinations or points of interest e g hotels restau rants chemists airports railway stations authorised workshops etc The car s posi tion is determined by the GPS Global Posi tion System by processing signals from GPS satellites and the car s odometric sig nals Blue amp Me Nav uses digital map ping data preloaded onto your USB device to lead you to your desired destination by the best possible route from your current location VN The instructions provided by Blue amp Me Nav do not ex onerate the driver from full respon sibility for any manoeuvres carried out in traffic while driving the car and for respecting the highway code and other road traffic regulations Re sponsibility for road safety always lies with the driver of the car indic all circumstances
18. PAUSE UPDATE Then select it with button OK or Blue amp Me Nav will display the message UP DATE PAUSED and say Update paused O Turn the ignition key to STOP Using the phone during the updating procedure During the updating procedure it is howev er possible to make or answer a call Blue amp Me Nav will pause the updating procedure and resume it at the end of the phone conversation automatically To make or answer a call during the updating procedure using manual interaction refer to sections MAKING A PHONE CALL and IN COMING CALLS The updating procedure will be paused auto matically Ending the phone call will resume the up dating procedure automatically Resuming the update If the updating procedure is paused using the settings menu option the updating procedure shall be then resumed manually To resume the updating procedure using manual interaction proceed as follows 0 Your mobile phone shall be paired with Blue amp Me Nav CJ Press v and move to SETTINGS RE SUME UPDATE this menu option is available only if update has been previ ously paused Press OK or 5 Blue amp Me Nav will display the mes sage RESUME UPDATE and say Up date On completion a message will appear If the updating procedure was paused be cause the ignition key has been turned to STOP the updating procedure will be re sumed automatically Notes Updates will be resumed aut
19. and say Navigation SETTINGS FUNCTIONS The SETTINGS menu enables you to per form the following functions Pairing a mobile phone O Managing user data O Managing Blue amp Me Nav update O Media player settings CJ Advanced Options To perform functions and adjustments in the SETTINGS menu you may use buttons on the steering wheel or voice commands at car standstill When the car is moving you can use voice commands only Instructions are provided for both methods gt If you encounter difficulties with any of the Blue amp Me Nav settings consult section TROUBLESHOOTING PAIRING A MOBILE PHONE Before you can use your mobile phone with the hands free phone function on your car you must create a pairing relationship be tween the mobile phone and the hands free phone system During the pairing procedure the hands free phone system attempts to detect a phone equipped with Bluetooth wireless tech nology within range and then establishes the connection using a Personal Identifica tion Number PIN After a pairing relation ship is established you can use the hands free phone system to make and receive phone calls and do other operations via your wirelessly connected mobile phone IMPORTANT The mobile phone pairing PIN number is a special PIN generated ran domly at each new pairing and used just for this operation It is not your SIM PIN and therefore it is not required to store or to keep i
20. and then press OK or v to start playing it Or using voice interaction ay Press and pronounce Play anything To pause the track being played Press ESC or button MUTE on sound system front panel amp x manual interaction proceed as fol 33 BLUE amp ME nav BLUE amp ME nav 34 Play To resume playback of the paused track Press ESC or button MUTE on sound sys tem front panel To stop playing a track Pronounce Stop Next track To play next track using manual in amp teraction proceed as follows ay Previous track While playing a digital track press V Or using voice interaction While playing a digital track press aa and pronounce Next To play the previous track using man amp ual interaction proceed as follows ay While playing a track press A Or using voice interaction While playing a digital track press au and pronounce Previous Note If Previous track manual or voice com mand is given after playing the first 3 sec onds of the track the track will be played again If it is given within the first 3 seconds the previous track will be played Changing audio source To change the current sound source Radio CD CD Changer Media player press OK or buttons FMas AM CD on sound sys tem front panel Note For further details on voice commands key words to be used with the media player refer to section VOICE
21. car and attempt to perform the function again manually or continue driving and perform the function using the voice recognition system Problem The system did not respond to voice command or key press Probable Cause CJ If you do not speak soon enough after pressing the system will interrupt voice interaction O If you are speaking too far from the in car microphone for example if you are sitting in the back seat the system may not hear your voice com mand O If you don t wait for the tone after pressing a the system will get only a portion of the keyword and will misrecognize it O If you don t press 2 before pronouncing a voice command the system will not activate voice recognition and therefore recognize your voice commands O If you don t press v to enter the Main Menu it will not be possible to access manually the Blue amp Me Nav menu CJ If after pressing you don t take action within approx eight seconds the system will not respond to your key press Possible Solution Press 22 and pronounce the voice command again Make sure that you face forward and speak clearly at a normal volume J Press v and try the operation again Make sure to take action within approxi mately eight seconds after pressing v BLUE amp ME Nav BLUE amp ME Nav Problem The system prompted to enter a PIN number but no phone pairing procedure was running When in close proximity of the c
22. command is available in this event Blue amp Me Nav will display a list of the available submenus Speak one of the following com mands to gain access to the required function New destination O Resume navigation 0 Arrival information O Stop navigation O Recent destinations 0 Navigation settings O Vehicle position Route simulation Note Some submenus may not be available since they are activated only once navigation to wards a destination has started If your USB includes a cartography that is not up to date Blue amp Me Nav will dis play for a few seconds the following mes sage UPDATED MAP AVAILABLE ON WITH YOUR DEALER Get in touch with Alfa Romeo Authorized Services to check if up to date maps are available 37 BLUE amp ME Mav BLUE amp ME Nav 38 New destination The NEW DESTINATION menu allows you to enter a destination in various ways O ADDRESS set the address by choosing a town city centre or the required street O POINTS OF INTEREST select a point of interest from the relevant submenu Notes You can also request a new destination ad dress or point of interest asking directly to the operator by means of DriveMe gt Refer to the DriveMe paragraph To chose a destination interact with Blue amp Me Nav while the vehicle is mov ing and only by following the procedure New destination Points of in terest gt Local A For
23. contain multiple versions of this EULA such as multiple translations and or multiple media versions e g in the user documentation and in the software Even if you receive multiple versions of the EULA you are licensed to use only one 1 copy of the SOFTWARE No Rental Except as authorized by Fiat Auto S p A you may not rent lease or lend the SOFTWARE SOFTWARE Transfer You may permanently transfer all of your rights under this EULA only as part of a sale or transfer of the DE VICE provided you retain no copies you transfer all of the SOFTWARE including all component parts the media and printed materi als any upgrades this EULA and if applicable the Certificate s of Authenticity and the recipient agrees to the terms of this EULA If the SOFTWARE is an upgrade any transfer must include all prior versions of the SOFTWARE Termination Without prejudice to any other rights Fiat Auto S p A or Fiat Auto S p A s Software Suppliers may terminate this EU LA if you fail to comply with the terms and conditions of this EULA In such event you must destroy all copies of the SOFTWARE and all of its component parts Consent to Use of Data You agree that Fiat Auto S p A s Software Suppliers their affiliates and or their designated agent may collect and use technical information gathered in any manner as part of product support services related to the SOFTWARE Fiat Auto S p A s Software Suppliers their affiliate
24. in car audio equipment to deliver audio output hands free phone conversation media player voice announcements and tone signals For this purpose the current audio program is mut ed for the time needed You can always adjust the audio volume ei ther through the radio or the steering wheel controls When the audio system is used by Blue amp Me Nav the radio display will show dedicated messages Blue amp Me Nav FUNCTION MENU Blue amp Me Nav Main Menu displays op tions within a structured list Each option item in the menu can be viewed on the instrument panel multifunction display Avail able options enable to activate the different functions or to change the settings of your Blue amp Me Nav system O LAST CALLS this submenu allows you to view a list of the recent calls made or received This list is either downloaded from your mobile phone memory or ac cumulated via use of the hands free phone or both O PHONEBOOK this submenu allows you to view the phone numbers in your phonebook and to select one to dial If there is a large amount of entries in your phonebook then the items will be con tained in groups within alphabetical sub menus indicating the contacts within that group The number of contacts within a group depends on the amount of entries in your phonebook 19 BLUE amp ME nav BLUE amp ME nav 20 O MESSAGE READER Function on ly available with compatible mo bile
25. is connected to Blue amp Me Nav the system will let you chose to call this num ber or start navigating towards the des tination selected After selecting the destination want amp ed and selecting START NAVIGA TION the system will allow you to select either CALL or START Select the option shifting A or W and press OK o v to confirm gt After selecting the destination want ed and saying Start say Call to phone the number combined to this destination or Start per to start navigation Navigation settings The NAVIGATION SETTINGS menu al lows you to establish navigation options e g by indicating whether you want Blue amp Me Nav to calculate the fastest or shortest route or whether motorways or ferries should be included in the route cal culation This menu also allows to set your preference on the vocal completion of the destination by means of DECTATE DESTINATION and determine the notices on the points of interest with POI ALERTS WARNING UN For road safety reasons it is only possible to en ter a new destination with the car at a standstill In order to access the navigation set 0 tings using manual interaction pro ceed in the following way Activate the main Menu select the NAVIGATION option and then press OK or Select the NAVIGATON SET TINGS menu and press OK or v to confirm gt Or with voice interaction 1 Press and say Navigation
26. it later For further details on the message reader SMS refer to section MESSAGE READER FUNCTIONS gt If you encounter difficulties with any of the message reader settings consult section MESSAGE READER TROUBLESHOOTING MEDIA PLAYER QUICK REFERENCE GUIDE To start playing the digital audio files stored on your USB device proceed as follows tracks to your USB device Blue amp Me Nav recognizes wma mp3 and wav formats for audio files and wp and m3u formats for playlists J USB devices without USB wire just con nect the USB device directly or by an ex tension lead to the USB port on the car see fig 1 CJ USB devices with USB wire use the wire to connect the USB device to the USB port on the car see fig 1 Turn the ignition key to MAR Blue amp Me Nav will start automati cally to play your digital tracks selecting them from the library built at the moment the USB device is connected O After Blue amp Me Nav has built the li brary containing your digital audio files you can select and play tracks albums artists and playlists by interacting manually or ver bally with Blue amp Me Nav Building the library may require a few minutes if your USB device contains several files 3 iPod player see dedicated paragraph 0 You can also decide whether to play au dio files automatically when connecting the USB device or to play them upon your command
27. manu amp al interaction proceed as follows Select SYSTEM CODE and then press OK or The instrument panel display will show your Blue amp Me Nav system code Press OK or v or ESC to quit Or using voice interaction ay Press pronounce Settings wait shortly for feedback and then pronounce Device ID The instrument panel display will show your Blue amp Me Nav system code Press OK or v or ESC to quit Changing the GPRS code If your mobile phone carrier requires to change the GPRS code you can perform this operation via the ADVANCED OPTIONS menu A To change the GPRS code using man amp ual interaction proceed as follows Go to the GPRS CODE menu and press OK or The display will show GPRS and a list of digits 1 2 3 4 5 6 7 8 9 DEFAULT and DISABLE To select the new GPRS code press amp and V until choosing the required op tion then press OK or To store the default value select DEFAULT To disable the connection code select DISABLE After setting the new GPRS code Blue amp Me Nav will display the message GPRS CODE t gt To set the GPRS code using voice in teraction proceed as follows Press aa pronounce Settings and then Connection code Blue amp Me Nav will prompt The current GPRS connection code is val ue To change code say a number from 1 to 9 or say Default To disable the connection code say
28. message will delete the oldest one received from the inbox All messages stored by Blue amp Me Nav can be deleted by one single command A To delete all messages open the amp x Blue amp Me Nav Main menu and select DELETE ALL then press OK or the system will ask DELETE ALL MESSAGES FROM VEHI CLE press OK or to delete all messages otherwise press ESC A Or using voice interaction t Press and pronounce Message reader After the acoustic signal say Delete all Blue amp Me Nav will ask Delete all messages from the vehicle now say Yes to delete all messages otherwise say No SIGNAL TYPES With the Blue amp Me Nav message read er it is possible to set three notification sig nals for the arrival of a new SMS text C VIS ACOUST Blue amp Me Nav will warn you of a new incoming message through a visu al signal on the instrument panel display and through acoustic signal Blue amp Me Nav will also ask if you would like to read the message O VIS SIGNAL Blue amp Me Nav will warn you of a new incoming message through a visu al signal on the instrument panel display The message received can also be read later see paragraphs How to read the last SMS text received and Inbox O READER OFF Blue amp Me Nav deactivates the Message reader a new incoming message will not be signalled and will not be transmitted to the system Open the Blue am
29. read the last message received 7 Inbox Messages received Incoming messages Texts received Incoming texts Receive To display the inbox the system will display the first message contained in the inbox Delete all Delete messages Delete texts Delete To delete all the messages contained in the inbox the system will ask for confirmation before deleting the messages Signal type Signal Type of signal To set the Signal type Read gt Read again e Call Dial Delete gt Delete message Next __ Forward The one after Previous Back 23 e Backwards The one before Reader Switch off reader e Switch reader off Deactivate reader Visual and acoustic signal I e Visual and acoustic Acoustic Visual plus acoustic Visual signal only gt e Visual Visual only f To read the selected message in the inbox To start a call to the phone number of the message selected To delete the call to the phone number of the message selected To read next message To read previous message To switch the message reader off new incoming message will not be signalled and will not be transmitted to the system The arrival of a new message will be both indicated through a visual signal on the instrument panel display and through an acoustic signal the system will sound a
30. recognition is an easy and con venient way to use Blue amp Me Nav All the system functions are available with in the Blue amp Me Nav Main Menu When the car is not moving you can surf through the menu using either buttons on the steering wheel and voice commands When you are travelling you can interact with Blue amp Me Nav using buttons on the steering wheel or voice commands rel evant only to phone functions LAST CALLS and PHONEBOOK and media player To activate settings when travelling you can only use voice commands The hands free kit enables the following op erations O Contact calling by voice you can call a contact in your mobile phone phonebook using your voice You can also call a con tact in your phonebook by scanning through the entries on the display To use this option you have to transfer your mobile phone contacts to the hands free kit phonebook O Digit dialling by voice you can dial a phone number by speaking the digits to be dialled To call the SMS text sender call di rectly the last SMS text sender or the sender of a message received and stored yet in the Blue amp Me Nav inbox O To answer a call you can answer an incoming call by pressing the key v on the steering wheel O Conference Call you can call another contact while you are engaged in a phone conversation with Bluetooth phones supporting this option O Call waiting while engaged in a phone co
31. ring tones to the hands free phone system and play cus tomized ring tones for incoming phone calls In this case the incoming phone calls will have your mobile phone customized ring tones MANAGING PHONE CALLS Transferring a phone conversation from your mobile phone to the hands free phone system If you enter the car during a phone conver sation from your mobile phone and you want to continue the conversation using the car hands free phone system you can transfer the phone conversation to it Proceed as follows J Get into he car and turn the ignition key to MAR to activate the hands free phone system The system will send a message to your mobile phone offering hands free phone support C3 To transfer the conversation to the hands free phone enter the information re quired by your mobile phone This process is different for each mobile phone J The phone conversation is transferred to the system Transferring a phone conversation from the hands free phone to your mobile phone To transfer a phone conversation from the hands free phone to your mobile phone press OK You can talk on your mobile phone and still use buttons on the steering wheel Specifi cally you can press v to switch between two phone calls on your mobile phone or press v for longer than 1 second to end the phone conversation Putting a phone call on hold To put a phone call on hold and disable the microphone so that y
32. road safety reasons it is only possible to enter a new with the car at a stand still Address Use this menu to enter the address of your required destination indicating the country the town city the name of the road street and the house number A To enter an address using manual in t teraction Activate the main Menu select the NAVIGATION option and then press OK or v Select the NEW DESTINATION option by pressing OK or v Select ADDRESS and then press OK or Or use voice interaction by pressing az and saying Navigation Once the system message has finished say New destination and then Address Blue amp Me Nav starts by asking your to select the required country name e Before anything else the system de termines which countries are pre loaded on your USB device If the maps for only one country are pre sent this will be set as the destination country Use A or W keys to se amp lect the required country and press OK or v to confirm Using voice interaction say the re i quired country Blue amp Me Nav will ask you to confirm the selected country by means of a voice mes sage Notes CJ In order to select the country the USB de vice containing the maps must be insert ed in the USB port on the car If several countries are loaded on your USB device Blue amp Me Nav will show a list of countries in alphabetical or d
33. street using the same method as when entering the town city The town city centre may also be chosen as a destination O Specify the house number of the desti nation street by saying Enter num ber or say Start to begin navigation immediately For road safety reasons address input op erations may only be carried out with the vehicle parked To obtain information on all navigation sys tem functions and user instructions refer to the NAVIGATION FUNCTIONS section gt If you are experiencing difficulty using the navigation system consult the PROB LEM SOLVING NAVIGATION SYSTEM section 15 BLUE amp ME nav BLUE amp ME nav 16 HOW TO USE Blue amp Me Nav CONTROLS STEERING WHEEL Buttons on the steering wheel see fig 1 are used to perform functions on the hands free kit activating voice recognition using the media player functions or selecting a Blue amp Me Nav menu option Certain buttons have multiple functions which depend on the current state of the sys tem The function chosen in response to a key press is in some cases controlled by the du ration of the key press short or long gt For further information read chapter DIS PLAY AND BUTTONS ON THE STEERING WHEEL Instructions concerning manual controls are identified in the text by symbol amp VOICE COMMANDS Voice commands can be pronounced by the driver which does not need to change his her normal driving pos
34. the nearness alter has or has not been already set If it has been set symbol will be displayed before the name of the cate gory if it has not been set only the name of the category will be displayed Chose the category desired shifting A or W and push OK o to set or dis able the nearness alert After selecting push ESC or wait a few sec onds to return to the previous menu If you chose SELECT DISTANCE Blue amp Me Nav will suggest a list of possible distances where the POI ALERT can be enabled Shift A or W to chose the distance de sired among NEAR FAR and VERY FAR push OK o v to confirm gt Or with voice interaction e Push aw and say PDI ALERT Blue amp Me Nav by means of the vo cal synthesis will allow to set the Points of interest categories and the distance where the nearness alert is to be started choosing between SELECT POI and SELECT DISTANCE Ol you say SELECT POI Blue amp Me Nav will display the list of POIs where a nearness alert has already been set and will allows you to add new categories or disable previous alerts set by saying the name of the category want ed You can also see the list of all the cat egories available by saying the word List If you say SELECT DISTANCE Blue amp Me Nav will ask you to set the distance where the POI ALERT is to be enabled Say the distance desired choosing among NEAR FAR or Very Far
35. the system will say Con necting and then the display will show the paired mobile phone ID It is of vital importance to wait until this confirmation message is displayed since pressing v or ESC at this time may cancel the pairing process If pair ing fails an error message will be dis played and the pairing procedure shall be repeated At first pairing the system will say Welcome immediately after con necting This message will no longer be heard at next pairing procedures The system asks if you would like to copy your paired phone phonebook It is recommended to copy it To start copying the phonebook press OK or v otherwise press ESC You can download your phonebook at a later time using the menu option SET TINGS USER DATA PHONE BOOK e For certain mobile phones the phone book is not copied automatically in this case you must send the contacts in your mobile phone phonebook to the hands free phone system using your mobile phone keypad If the hands free phone system asks you to do this then perform this procedure following the instructions specific to your mobile phone and press when you have finished Or using voice interaction Press and pronounce Set tings wait shortly for feedback and then pronounce Pairing The system shows the mobile phone pairing PIN on the instrument panel display and repeats it For the next two steps consult your mobile phone owner s manual
36. v For further details on how to build playlists refer to section PRACTICAL HINTS PLAYING AUDIO TRACKS Shuffle playback of the whole media library Option PLAY ANYTHING shall be used to play quickly the whole content of your media library at random To start PLAY ANYTHING using amp manual interaction proceed as fol lows Launch the Main Menu select ME DIA PLAYER and then press OK or Select PLAY ANYTHING and press OK or g Or using voice interaction Press and pronounce Play anything For further details on digital audio files playback refer to section DIGITAL AU DIO SELECTION Now playing track data With the NOW PLAYING option you can display current track data for 15 seconds A To start this option using manual in amp amp teraction proceed as follows Launch the Main Menu select ME DIA PLAYER and then press OK or Select NOW PLAYING and then press OK or Or using voice interaction g Press amp and pronounce Now playing When the playback of a digital audio track is started the relevant track data will be au tomatically displayed for 15 seconds Audio play 9 To start playing an audio file using lows If AUTOPLAY option is on con nect your USB device to amp Nav track playback will start auto matically gt SETTINGS FUNCTION MEDIA PLAY ER You can also select the required audio file
37. you Organizing media files O In order to make the musical selection on Blue amp Me Nav based on predefined selection criteria author album type etc information contained in multime dia files must be catalogues and updat ed To update file data follow the in structions given on your software in struction manual If certain items in your library have no Artist Album Title and Genre Blue amp Me Nav will show UN KNOWN in ALBUMS and GENRES menus To enter the required data follow the instructions given on your software instruction manual Building the media library on Blue amp Me Nav Building the media library may require afew minutes If the time required is ex cessive you can intervene by reducing the number of audio files stored on your USB device CJ While building the library it is however possible to play a selection of tracks Blue amp Me Nav will build the library while playing music Building playlists for Blue amp Me Nav For building m3u or wpl playlist for Blue amp Me Nav using Microsoft Win dows Media Player proceed as follows O Copy required tracks into a new folder or to your USB memory device 0 Open Microsoft Windows Media Play er Select File Open from the menu O Scroll the content of USB device con nected to your computer and select the audio files to be entered in the playlist O Click on Open O Move to File and select Save
38. CJ GPS reception is difficult under trees among tall buildings in covered car parks in tunnels and in any place where the satellite aerial reception may be hindered O The Blue amp Me Nav navigator takes a few minutes to determine the car s new position if the car is moved with the sys tem turned off e g after transporting the car on a ferry O If the vehicle battery is disconnected the GPS takes about 15 minutes to activate O The system is equipped with a self cali bration function that needs to operate for about 100 km when the system is first turned on or if the tyres are changed Dur ing this stage the position could be cal culated with less accuracy CJ Under continuous conditions of low wheel grip e g when skidding on ice the sys tem may temporarily record an inaccurate position Navigation display On the control panel reconfigurable multi function display see fig 3 the manoev vres to be carried out right turn left turn drive round round about go straight on or change direction are displayed by means of pictograms The display also indicates the name of the current street and the distance to the next turn off The name shown near the turn off is that of the street where the manoeuvre is to be carried out A0A1300m A Navigation pictogram B Distance to the next turn off C Street name Voice messages The voice messages issued by the system recommend all manoeuvre
39. DESTINATIONS IMPORTANT When leaving your car in a service centre remember that the personal data stored on the Blue amp Me Nav phone book and recent cars text message inbox and recent destinations may be recorded or subject to improper use Before leaving your car in a service centre you will be able to delete registered user data and phonebook data stored in the Blue amp Me Nav gt For further information on the deletion of user data phonebook and text message inbox refer to the section SETTING FUNCTIONS USER DATA gt For further information on deleting recent destinations refer to the section NAVIGATION FUNCTIONS RECENT DESTINATIONS 95 BLUE amp ME nav BLUE amp ME nav 96 SYSTEM SOFTWARE USE NOTICE This system contains software that is licensed to Manufacturer pursuant to a license agreement Any removal reproduction reverse en gineering or other unauthorized use of the software from this system in violation of the license agreement is strictly prohibited and may subject you to legal action IMPORTANT Hacking the Blue amp Me Nav device or installing unapproved software may lead to warranty void and compromises of safety and of the security of stored information END USER LICENSE AGREEMENT EULA You have acquired a device DEVICE which includes software licensed by Fiat Auto S p A from or more software licensors Fi at Auto S p A s Software Suppliers Such softwa
40. Disable To change the code say a number from 1 to 9 or say Default To dis able the connection code say Dis able In previous text value is the GPRS connection code set at that mo ment After setting the new connection code Blue amp Me Nav will say The Con nection Code is set to value here val ue corresponds to the new GPRS code set MEDIA PLAYER SETTINGS Autoplay When the Autoplay option is on Blue amp Me Nav will start to play the au dio files on your USB device as soon as you turn the ignition key MAR Once you activate this option the first time you use the player playback will start automatically The Autoplay option shall be disabled when required before connecting your USB device to the USB port and building or up dating the media library A To change Autoplay setting using E ay manual interaction proceed as fol lows Open the Main Menu select SET TINGS MEDIA PLAYER AU TOPLAY and then press OK or To activate Autoplay select AUTO PLAY ON and press OK or v To deactivate Autoplay select AUTO PLAY OFF and press OK or v Or using voice interaction Press aa and pronounce Autoplay on or Autoplay off Note If you change the Autoplay settings af ter connecting the USB device new setting will be activated the next time you connect a different USB device or the same USB de vice with updated track library 61 BLUE amp M
41. E Nav 58 ay In certain cases Blue amp Me Nav could say Update temporarily suspended System update will continue the next time you start the vehicle In other cases during the updating procedure the system may prompt to turn the ig nition key to STOP and then to MAR When updating is over and available Blue amp Me Nav will display the message UPDATE COMPLETE and say Update completed Or using voice interaction Check for proper pairing between your mobile phone and Blue amp Me Nav and proper configuration for da ta transmission Press and pronounce Set tings Update Blue amp Me Nav will show the message UP DATE will say Update and then it starts the updating procedure If no update is available Blue amp Me Nav will display NO UPDATE AVAILABLE and soy No update available Otherwise Blue amp Me Nav will complete the updating pro cedure In certain cases Blue amp Me Nav could say Update temporarily suspended System update will continue the next time you start the vehicle In other cases during the updating procedure the system may prompt to turn the ig nition key to STOP and then to MAR When updating is over and available Blue amp Me Nav will display the message UPDATE COMPLETE and say Update completed 9 Or To pause updating using manual in teraction proceed as follows During updating select SETTINGS
42. E nav BLUE amp ME Nav 62 Shuffle Use the Shuffle option to change the play back sequence With Shuffle option on Blue amp Me Nav will play digital audio files at random B e ay To change Shuffle setting using man ual interaction proceed as follows Open the Main Menu select SET TINGS MEDIA PLAYER SHUFFLE and then press OK or v To activate the Shuffle option se lect SHUFFLE ON and press OK or To deactivate it select SHUFFLE OFF and press OK or Or using voice interaction Press 2 and pronounce Shuffle on or Shuffle off Loop Use the Loop option to repeat a track To activate the Loop option using amp manual interaction proceed as fol lows Open the Main Menu select SET TINGS MEDIA PLAYER LOOP and then press OK or v To activate the Loop option select LOOP ON and press OK or v To deactivate it select LOOP OFF and press OK or v Or using voice interaction Press ag and pronounce Loop on or Loop off With Loop option on previous and next track playback will pass to the previous or next audio track that will start to be re peated EXIT THE SETTINGS MENU At the end of any of the operations described above you can exit the settings menu ds described below To exit the SETTINGS menu using amp x manual interaction Select EXIT and then press OK or Or using voice interaction gt amp Pr
43. E amp ME nav BLUE amp ME Nav 14 If John has several phone numbers but the location i e the type of phone number like work home etc is missing the sys tem will display the selected contact and a list of related phone numbers The hands free phone system will ask if you would like to call the phone number displayed To re spond with yes pronounce Yes oth erwise pronounce No If this is the cor rect contact but the wrong number say Forward or Backward fo navigate to the phone number you d like to call To call the displayed phone number pronounce Call You can also surf the phone num ber list manually by pressing the buttons on the steering wheel or W until you find the required number Now press or OK to start the call CJ To end the phone call press v for longer than 1 second gt If you encounter difficulties with any of the voice recognition operations consult sec tion HANDS FREE KIT TROUBLESHOOTING MESSAGE READER QUICK REFERENCE GUIDE compatible mobile phones only If your mobile phone with Bluetooth wireless technology supports the message reader function at the arrival of a new SMS text Blue amp Me Nav plays a tone and it will ask if you would like to read it pronounce Yes or press v or OK to read the last message received J pronounce No or press ESC the sys tem will store the message so you can read
44. ES ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE IN NO EVENT SHALL FIAT AUTO S p A S SOFTWARE SUPPLIERS AND OR THEIR AFFILIATES BE LIABLE FOR ANY AMOUNT IN EXCESS OF U S TWO HUNDRED FIFTY DOLLARS U S 250 00 FOR APPLICABLE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO YOUR PARTICULAR JURISDICTION PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED WITH THIS PACKAGE OR PRO VIDED WITH THE SOFTWARE PRINTED MATERIALS 99 BLUE amp ME nav SERVICE CUSTOMER SERVICES TECHNICAL SERVICES SERVICE ENGINEERING Largo Senatore G Agnelli 5 10040 Volvera Torino Italia Fiat Group Automobiles S p A Publication no 60431798 1 Edition 07 2008 All rights reserved Reproduction even in part is prohibited without written permission from Fiat Group Automobiles S p A ENGLISH SERVICE
45. For further details on media player refer to section MEDIA PLAYER FUNCTIONS gt If you encounter difficulties with any of the voice recognition operations consult section MEDIA PLAYER TROUBLESHOOT ING NAVIGATION SYSTEM QUICK REFERENCE GUIDE Proceed as follows to begin using the Blue amp Me Nav navigation function O Connect USB device provided with the Blue amp Me Nav navigation kit with the map software to the USB present on the car see fig 1 Ensure the ignition key is in MAR posi tion Press the control on the steering wheel and say Navigation Blue amp Me Nav will show the following warning mes sage on the display THE DRIVER MUST RESPECT THE ROAD RULES Now say New destination and then Address Blue amp Me Nav will ask you the required country and you should say the country where your destination is located The system will ask you to enter the name of the destination city starting with manu al interaction and then completing using voice commands Use A or V keys to scroll through the characters required to make up the name of the town city and confirm each character selected by pressing the OK or v keys As soon as you have entered enough char acters Blue amp Me Nav will ask you to say the required town city You can also continue entering the name of the town city using the steering wheel controls 0 Continue entering the destination road
46. ME nav Problem Display screen shows PAIRING FAILED Or the system says Bluetooth pairing timed out Please try again later Display screen shows INCOMING CALL PRIVATE NUMBER Display screen shows FUNCTION ENABLED ONLY WHEN VEHICLE STATIONARY Or the system says This function is only available when the vehicle is stationary Probable Cause After three minutes each attempt to enter the PIN number fails since pairing timed out O The caller is not recognized as a name stored in the phonebook and the paired mobile phone does not have a called ID feature O The caller has blocked caller ID to prevent the system from displaying the caller s name and or phone number Even occasional short viewings of the car display may be hazardous if your attention has been diverted away from your driving tasks Certain Blue amp Me Nav functions which require the user to give attention to the car display are only available when the car is stopped Possible Solution Retry the pairing procedure During the PIN entering step verify that the PIN number you are entering on the mobile phone is the same number that is shown on the instrument panel display gt SETTING FUNCTIONS PAIRING YOUR MOBILE PHONE Enter a contact in your mobile phonebook for the incoming call and then download your phonebook contact again In this case nothing can be done and the message will always appear Stop your
47. NO PHONEBOOK FOUND Or the system says As requested the phonebook has not been copied To copy the phonebook onto the system go to SETTINGS menu and select USER DATA To dial a phone number say Dial Probable Cause For pull phones CJ When the system asked The data from the phonebook will now be copied onto the system Continue you responded with No CJ You have not downloaded your phonebook via the SETTINGS menu CJ The downloaded phonebook was deleted For push phones O When the system asked The data from the phonebook will now be copied onto the system Continue you responded with No You have not sent contacts to the system using the ADD CONTACTS procedure The downloaded phonebook was Possible Solution For pull phones in the SETTINGS menu to download the phonebook again O Enter contact information in the phonebook on your mobile phone and then download the phonebook again gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK For push phones J Use the option ADD CONTACTS in the SETTINGS menu to send contacts in the phonebook on your mobile phone to the system 2 SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK deleted O Use the option COPY PHONEBOOK 77 BLUE amp ME Nav BLUE amp ME nav 78 Problem Display screen shows PHONEBOOK EMPTY Or the system says Phonebook empt
48. Resume navigation The system will ask you to say Yes to resume navigation or No to cancel the above operation If you turn your car s ignition key to STOP during a navigation session Blue amp Me Nav will automatically suspend navigation When you turn your car s ignition key to MAR the system will ask you if you wish to resume navigation and show the preset destination address on the reconfigurable multifunction display _ With manual interaction press OK or t amp v to resume navigation or ESC in or der not to activate gt With voice interaction say Yes to resume navigation or No in order not to activate Arrival information Blue amp Me Nav is able to provide you with an estimated time of arrival at your des tination and distance to the destination A With manual interaction Activate the gt main Menu select the NAVIGA TION option and then press OK or Select the ARRIVAL INFORMA TION option by pressing OK or v Blue amp Me Nav will display an es timated time of arrival and estimated distance remaining to the destination Note When the car is moving the arrival infor mation may be displayed immedi ately by pressing the NAV key on the key pad near the courtesy light see fig 1 gt With voice interaction press and say Navigation and then once you have heard the system message say Arrival information Blue amp Me Nav will display th
49. S PLAY in a clear tone wait for voice confirmation by the system which will say CONTINUOUS PLAY DEACTIVATED Remember that your iPod must have some charge or wait a few minutes until the system recharges it NAVIGATION SYSTEM Problem The display indicates INSERT USB MEMORY WITH MAPS The display indicates WAIT NO GPS SIGNAL Probable Cause O No USB device is connected O The USB device connected does not contain map data J The USB device is faulty or connected incorrectly GPS signal reception could be hindered if the car is located beneath trees among tall buildings in covered car parks or in tunnels CJ The battery has been disconnected e g during servicing A system fault may have occurred or the GPS aerial may have been disconnected Possible Solution Insert the USB connecting the Blue amp Me Nav maps in the USB port CJ Check that the USB device in use the same one received in the Blue amp Me Nav navigation set or check that the maps for Blue amp Me Nav are loaded on the USB device CJ Check the USB device is properly connected CJ Check that the USB device used is the same one included in the Blue amp Me Nav navigation set CJ Try to load the map data onto a new USB device using the Blue amp Me Nav Map Assistant software on the map CD ROM see the Blue amp Me Nav Mop Assistant quick guide in the Blue amp Me Nav navigation set
50. The voice recognition system may occa sionally misrecognize a voice command To ensure that your voice commands are al ways recognized by the system use the fol lowing guidelines O After pressing pronounce the voice command after the system plays a tone indicating that voice recognition is active O After the system asks a question wait for one second before pronouncing the re sponse to ensure that voice recognition is active CJ If you want to pronounce a command without waiting that the system has fin ished its announcement or question you can press again shortly to interrupt what the system is saying and pronounce your command CJ Speak at a normal volume CJ Pronounce words clearly in your natural voice at a moderate pace without stops If possible try to minimize background noise in the car Ask the other passengers to keep silent while you are pronouncing voice com mands to prevent misunderstanding since the system could recognize other words in addition to or different from your voice command if several people are speak ing NOTES As concerns countries where the version in native language is not available voice recog nition of the different commands and phone book contacts could be difficult You are therefore recommended to adopt a pro nunciation accent meeting the language present on Blue amp Me Nav To change the voice recognition language con tact Alfa Rom
51. about Bluetooth pairing On your mobile phone query for de vices equipped with Bluetooth wireless technology that are within range this option on your mobile phone might be called Discover New Device etc View the list of Blue tooth wireless technology enabled devices and select Blue amp Me item that identifies the hands free kit in your car When prompted by the mobile phone enter the PIN number shown on the instrument panel display using your mobile phone keypad If pairing is suc cessful the system will say Con necting and then the display will show the paired mobile phone ID It is of vital importance to wait until this confirmation message is displayed since pressing or ESC at this time may cancel the pairing process If pair ing fails an error message will be dis played and the pairing procedure shall be repeated At first pairing the system will say Welcome immediately after con necting This message will no longer be heard at next pairing procedures The system asks if you would like to copy your paired phone phonebook It is recommended to copy it To start copying the phonebook pronounce Yes otherwise say No For certain mobile phones the phone book is not copied automatically in this case you must send the contacts in your mobile phone phonebook to the hands free phone system using your mobile phone keypad If the hands free phone system asks you to do this then p
52. an surf the phone number list manually by press ing or When you find the re quired number press 5 or OK to start the call To end the phone call press v for longer than 1 second When you call a contact with multiple phone numbers use the at location portion of the voice command e g at Home at Work on at Mobile This will shorten the amount of steps required to make the phone call Dialling a phone number using voice commands t gt To dial a phone number using voice interaction proceed as follows Press 229 and pronounce Dial The system will respond with Num ber please Pronounce the phone number as a se quence of single digits e g 0 A 2 3 a a 27 7 8 9 n plus 2 pound or star For example 0113290103 has to be pronounced as zero one one three two nine zero one zero three The system will repeat the complete phone number and display it If the number is complete pronounce Dial If you have not finished speaking the phone number then pro nounce the remaining digits and then pronounce Dial The system will start the call to the displayed phone number To end the phone call press v for longer than 1 second You can pronounce the sequence of phone number digits in digit groups which allows you to verify the recog nized number in several small por tions Digit groups
53. ar answering a phone call directly using the mobile phone answer button will automatically activate the free hands phone function the caller s voice is played through the car speakers Probable Cause After you delete the pairing related user information on your mobile phone the Bluetooth pairing relationship between your mobile phone and Blue amp Me Nav will no longer work Some types of mobile phones require you to set the phone to choose between automatic incoming call transfer to the system or non automatic incoming call transfer you will transfer the call using the mobile phone keypad as required Possible Solution Select option DELETE USERS on the system and delete all pairings then pair the phone again gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK gt SETTING FUNCTIONS PAIRING YOUR MOBILE PHONE Refer to your mobile phone owner s manual to find out how to set up the default location for phone audio when a phone call is received Problem Probable Cause Before re pairing with a mobile phone information for the first pairing on Blue amp Me Nav must be deleted Pairing a paired mobile phone the display screen shows Pair failed Or the system says Pairing failed Please try again After downloading the phonebook from the mobile phone contacts middle names initials prefixes or suffixes are not recognized by the voice recognition system prefixes suffixe
54. are created by the pauses you use while pronouncing the sequence of digits If you pause af ter pronouncing several digits a dig it group is created The system will re peat the recognized digits If the spoken digits are correct you can continue pronouncing the phone num ber If the spoken digits are incorrect you can delete the digit group by pro nouncing Delete The system will delete the last group of numbers and display the partially dialled phone num ber Then you can re pronounce the digit group and also the remaining phone number digits To cancel the phone call pronounce Cancel To cancel the phone call and start di alling again pronounce Start over To ask the system to repeat the rec ognized phone number pronounce Repeat If no phone number was dialled the system says No num ber available If the repeated phone number is cor rect pronounce Dial to start the call Note When dialling a phone number by voice commands it is essential to minimize back ground noise in the car and to ask the oth er passengers to keep silent while you are speaking digits Since the system is of the speaker independent type it can recognize also other voices there is therefore the risk that some numbers are accidentally recog nized added to correct numbers or not rec ognized Dialling a phone number using the mobile phone keypad 9 tx number using your mobile phone key B Al
55. art navigation Other town city Start navigating towards the displayed destination Used fo enter a destination address Points of interest e POI Select POI Select points of interest e Select Used to select a point of interest near a selected address Enter road Enter street Road Street Used to enter name of destination road street City centre entre Start navigating to the town city centre Used to enter a Points of interest for a destination L3 r3 e List e List e List POI e List POIs List points of interest List points of interest e List Airport Airports Bus station Bus Coach Bus station Bus stations Ferry terminal Ferries Boats Ferry terminal Hospital Hospitals Park and ride Car park P e Car parks Police station Police station Car Rental Agencies Car rental Provides a voice list of available categories of points of interest Select the Airport category Select the Bus Station category Select the Ferry Terminal 4 category Select the Hospital category Select the Park amp Ride category Select the Car Park category Select the Police Station category Select the Car Rental Agencies category LC continues Navigation Navigator Activate the NAVIGATION menu Next maneu
56. beep The arrival of a new message will only be indicated through a visual signal on The instrument panel display MEDIA PLAYER VOICE COMMANDS Media player Media Enters the Media player menu e Music Play Play music Activates playback Play media e Stop Stop music Stops playback Stop media Next Next track Next song The one after Plays next track Previous Previous track Previous song The one before Plays previous track Shuffle off e Random order off Deactivates random track playing E on Activates random track playing Loop on e Loop track on Activates track repeat Cycle on continues 3 71 BLUE amp ME Mav Nav BLUE amp ME 72 LC continued Loop off Loop track off Cyde off Now playing What s playing What is playing What s This track Folders Folder Browse folders Artists Artist Browse artists Genres Genre Browse genres Type of music e Styles Music styles Types Music types Albums Album Browse albums Playlists Playlist Browse playlists Deactivates track repeat Displays current track data Enters media player FOLDERS menu Enters media player ARTISTS menu Enters media player GENRES menu Enters media player ALBUMS menu Enters media player PLAYLISTS menu continues 3 LC continued Autoplay o
57. bluetooth phone connected Display screen shows PHONE DISCONNECTED Display screen shows PAIRING FAILED Or the system says Pairing failed Please try again Probable Cause The paired mobile phone is turned off CJ The paired mobile phone is not within range of the system the mobile phone should be located within approximately 10 m of the system Bluetooth wireless technology connection has been disabled on your mobile phone Blue amp Me ID mobile phone Bluetooth wireless technology capabilities C During an ongoing phone conversation the mobile phone was taken out of the system range JI A technical error occurred during the pairing procedure CJ A technical error occurred with the Possible Solution CJ Turn the paired mobile phone on CJ Make sure that your phone is paired CJ Make sure that the Bluetooth wireless technology connection on your mobile phone is enabled Blue amp Me or 10 Make sure that the mobile phone you paired with the system is within range Reset Blue amp Me Nav by turning the mobile phone off and on Reset Blue amp Me Nav by turning the ignition key to STOP and then to MAR again CJ Verify the correct PIN number and try entering it again Reset the mobile phone by turning it off and on and then retry the pairing procedure gt SETTING FUNCTIONS PAIRING YOUR MOBILE PHONE 79 BLUE amp ME nav BLUE amp
58. can restart dialling The system repeats the number that you pronounced Dials the phone number that you pronounced continues LC continued all Name Call Name rM ca at Home on at Cellular on at Cell Starts the process to call a contact in the phonebook transferred to the hands free kit Telephone Phone Callback Redial LLL Calls a contact In this keyword Name represents the full name of acontact in your phonebook Activates the phone function and speaks helpful information for using the hands free phone Dials the phone number of the last caller L y Dials the phone number of the last person called gt e at Work at Home on at Mobile on at Cellular on at Cell Calls a contact at Work Calls a contact at Home Calls a contact on at Mobile on at Cellular on at Cell BLUE amp ME 69 Nav BLUE amp ME Nav 70 MESSAGE READER VOICE COMMANDS Read last one Read last Read last message Read message Read last SMS text Read last text Read text Read SMS texts To read the last message received Message reader Messages SMS messages SMS texts SMS Texts To open the MESSAGE READER 2 Read last one Read last Read last message Read message Read last SMS text Read last text Read text Read SMS texts To
59. ceived open Blue amp Me Nav Main menu and select option MESSAGE READER then press OK or v Select option INBOX then press OK or Scroll stored messages and select the required one the system will display the SMS text sender s da ta if available Select READ and press OK or Blue amp Me Nav will read the selected message A Or using voice interaction t Press and pronounce Message reader after the acoustic signal pronounce Inbox Blue amp Me Nav will display the first message contained in the inbox and also the phone number of the SMS text sender if stored in the phonebook To scroll the Inbox pronounce Pre vious or Next when the required message is displayed say Read Blue amp Me Nav will read the se lected message Pronounce Delete to delete the selected message MANAGING MESSAGES For every message received Blue amp Me Nav enables to CJ read it CJ call directly the sender CJ delete it A To do this by manual interaction amp whilst reading the message activate the Main Menu of Blue amp Me Nav then press keys OK or v to se lect the desired function gt Or using voice interaction t Press and pronounce Read or Call or Delete the system will select the required option 27 BLUE amp ME nav BLUE amp ME Nav 28 DELETING ALL MESSAGES Blue amp Me Nav can store max 20 mes sages a new incoming
60. containing a playlist playlist capacity limit for this for mat is 300Kb Playlists with extension wpl can be built with Microsoft Win dows Media Player The media player does not support nested or linked playlists Playlist tracks relative and absolute paths are supported The media player does not support playlists built by application software based on spe cific criteria Playlists created by the iPod cannot be read The media player will play playlists with paths leading to digital audio files in folders For further details on how to build playlists for Blue amp Me Nav refer to section PRAC TICAL HINTS FOR USING THE MEDIA PLAYER Trade marks Microsoft and Windows are Microsoft Corporation registered trade marks Sony is a Sony Corporation registered trade mark Ericsson is a Telefonaktiebolaget LM Ericsson registered trade mark Motorola is a Motorola Inc registered trade mark Nokia is a Nokia Corporation registered trade mark Siemens is a Siemens AG registered trade mark Orange is an Orange Personal Communications Services Limited registered trade mark Audiovox is an Audiovox Corporation registered trade mark Bluetooth is a Bluetooth SIG Inc registered trade mark Lexar and JumpDrive are Lexar Media Inc registered trade marks SanDisk and Cruzer are SanDisk Corporation registered trade marks iPod iTunes iPhone are Apple Inc registered trade marks The other
61. cted the town city Blue amp Me Nav will ask you to enter the name of Road Street or to navigate to ward the city centre using the following menu O ENTER ROAD O CITY CENTRE 9 Using manual interaction Select the required option using the or Y keys and press OK or v to confirm Or with voice interaction c say Road or City centre If you choose City centre the system will display the full address and ask you to con firm in order to begin navigation If you select Enter road instead you must enter the destination road street in the same way as when you entered the town city O When entering the name of the road omit the type of road street road street avenue etc If the road street name is made up of several words you only need to enter one of the words making up the road street name gt If you wish to disable voice input of the road street refer to the NAVIGATION SETTINGS DICTATE DESTINATION sec tion After entering the destination Road Street Blue amp Me Nav will ask you if you wish to enter a house number or navigate to wards the address currently set The avail able options are O ENTER NUMBER O START NAVIGATION 9 Using manual interaction Select the required option using the A or Y keys and press OK or v to confirm T gt Or using voice interaction say En ter number or Start If you choose Star
62. date gt e Resume Updates Resumes the previously paused updating procedure Advanced Features Advanced Options Enters the ADVANCED OPTIONS menu Exits the SETTINGS menu i gt Delete users I x e Delete phone book Download phone book gt e Add Contacts __ e Reset all UIT Device ID Connection code Connection ID Deletes user data for pairing relationships Deletes the current phonebook Downloads phonebook from mobile phone to hands free phone system Note Pull phones only Adds contacts from mobile phone to hands free phone system Nota Push phones only Deletes all paired phone user data and phonebooks contacts and restores default values Displays the device ID Enters the GPRS CODE menu Pull ne means that your mobile phone supports phonebook automatic download with hoi Bluetooth wireless technology your whole phonebook will be automatically downloaded to the hands free kit during phone pairing procedure Push phone means that your mobile phone supports the single contact download with Bluetooth wireless techriolagy During the pairing procedure you will be required to send phonebook contacts from your mobile phone your phonebook is not automatically downloaded during the phone pairing procedure TROUBLESHOOTING HANDS FREE KIT General display screen Problem Display screen shows
63. e estimated time of arrival and the es timated distance remaining to the des tination If the trip duration exceeds 10 hours an indication of the remaining trip time will be given instead of the estimated time of ar rival Stop navigation If the car is actively navigating towards a destination Blue amp Me Nav will allow you to suspend the current navigation You can however resume the interrupted navi gation at any time you want gt See RESUME NAVIGATION paragraph To suspend navigation with manual interaction Activate the main Menu select the NAVIGATION option and then press OK or Select the STOP NAVIGATION op tion by pressing OK or Blue amp Me Nav will ask you to con firm the operation press OK or v to confirm or ESC to continue the set nav igation With voice interaction press and say Navigation and then once you have heard the system message say Stop navi gation The system will ask you to say Yes to stop navigation or No to continue the set navigation Recent destinations Use the RECENT DESTINATIONS func tion to call up one of the last 20 destina tions stored by Blue amp Me Nav in a ded icated list 9 When in main menu select the NAVIGATION option and then press OK or 5 Select the RECENT DESTINA TIONS option and press OK or v to confirm The system will show a list containing the most recent destinations set on
64. e s GPS position with manual interaction Activate the main Menu select the NAVIGATION option and then press OK or Select the VEHICLE POSITION op tion and press OK or v to display the required data Or with voice interaction Press 28 and say Navigation Once you have heard the system mes sage say VEHICLE POSITION Blue amp Me Nav will display the required information ay Route simulation Blue amp Me Nav uses this function to dis play a simulation of the calculated route To carry out a simulation navigation towards a destination must be in progress A destina tion must therefore have been set and the route must have been successfully calculated VN For road safety reasons it is only possible to en fer a new destination with the car at a standstill For road safety reasons it is only possible to alter the navigation settings with the car at a standstill A To simulate the active route by means ofmanual interaction Activate the main Menu select the NAVIGATION option and then press OK or Select the ROUTE SIMULATION option and press OK or v to start the simulation To stop the simulation simply press the NAV key on the keypad near the courtesy light Or with voice interaction Press 28 and say Navigation Once you have heard the system mes sage say route simulation Blue amp Me Nav will start the sim ulation e To stop the simulation press a
65. ebook down loaded In this way the system is brought back to initial conditions You can also down load either the phonebook or single contacts from your mobile phone to the system if you chose not to download the phonebook during the phone pairing procedure You can make adjustments to the user data used by the system using the option USER DATA A To open the USER DATA menu us amp ing manual interaction proceed as fol lows Press vto open the Main Menu then select SETTINGS by pressing OK or Select USER DATA and then press OK or Or using voice interaction Press aa and pronounce Settings wait shortly for feedback and then pronounce User data In the USER DATA menu you can perform the functions described below Delete user data In the USER DATA menu you can delete the pairing relationships After you delete the pairing relationship you cannot use an unpaired phone with the hands free phone system nor its phonebook until you cre ate a pairing relationship for it Always re member that this operation deletes all the pairing relationships A To delete user data using manual in amp teraction proceed as follows Select DELETE USERS and then press OK or v The system will display the message DELETE ALL REGISTERED USERS To confirm press OK or Or using voice interaction Press pronounce Settings wait shortly for feedback and then pronounce Del
66. eo Authorized Services or con sult the dedicated site at www alfaromeo com DISPLAY The different Blue amp Me Nav Main Menu options are displayed on the instrument pan el display see fig 2 The display shows the following information O Status information for the Bluetooth wireless technology enabled mobile phone 7 indicates that Blue amp Me Nav is currently connected with a Bluetooth wireless technology enabled mobile phone J The absence of symbol indicates that connection is disconnected A0A9600g MATH A SETTIMGS bd fig 8 O Symbol 41 indicates that current call is the first incoming one symbol present only with call waiting CJ Symbol 42 indicates that current call is the second incoming one symbol present only with call waiting 7 Symbol i amp indicates the Conference Call O The name of the active telephone oper ator on the individual mobile phone if not available will appear O The information on receipt of an SMS message on the telephone number or the name if stored in the phone book of the sender of the SMS message O The information on the music you are lis tening to with multimedia reader O Current Blue amp Me Nav information or current menu option see fig 2 The radio display shows information asso ciated with the audio track being played on the media player AUDIO Blue amp Me Nav uses your
67. er on the multifunction display If the system is able to detect the GPS position of the car the country where you are lo cated will be shown at the head of the list After selecting the country Blue amp Me Nav will ask you to enter the destination town city by means of the steering wheel control and voice interaction Procedure for entering destination TOWN CITY The area of the control panel multifunction display you use to enter the town city name is made up as follows A0A9610g TOWHeCITs A v SUAS EHIOR fig 4 A Blue amp Me Nav uses the first row to tell you that you are currently in town city input mode B The second row displays the characters already entered into Blue amp Me Nav which are used to make up the destination town city name C The third row is used to display the character selected using OK or v D The fourth row is made up of two parts you may scroll through the char acters shown on the left side of the dis play using the A key and those dis played on the right part using the W key Once you have entered two characters Blue amp Me Nav will help you by dis playing only the letters that could potentially be used to compose the final name of the town city according to the map informa tion stored in your USB device Operation of steering wheel keys during TOWN CITY name input O KEY A Allows you to scroll through the charac ters shown on the
68. erform this procedure following the instructions specific to your mobile phone and press when you have finished To improve both the voice recognition of your phonebook entries and Blue amp Me Nav pronunciation accuracy when repeating the entries please try to enter contact entries and memorize them using the following cri teria O Avoid abbreviations O Write foreign names according to the way in which they are pronounced according to the rules of the Blue amp Me Nav language set on your car For example enter Tanja as Tanya to improve recognition accuracy and also to obtain the correct pronunciation by the system O When adding or editing contact entries insert the appropriate accent marks when the name requires these marks to be properly pronounced and recognized by the system For example enter Nicolo Rebora as Nicol R bora to obtain the correct pronunciation O When adding or editing contact entries bear in mind that certain isolated block letter may be read as Roman numerals e g V may be read as fifth O When calling contacts by voice do not in clude the middle names or middle initials of your contacts 53 BLUE amp ME nav BLUE amp ME Nav 54 Notes 0 You are only required to pair your mobile phone a single time O You can pair up to five mobile phones to be used one at a time O On your paired mobile phone the Blue tooth setting must be turned
69. es and MP4 CJ USB devices with USB wire use the wire to connect the USB device to the USB port on the car see fig 1 O the ignition key to MAR If the AUTOPLAY function is set at ON then Blue amp Me Nav will automati cally start playing your digital tracks se lecting them from a library that is creat ed the moment the USB device is con nected gt FOR FURTHER INFORMATION READ CHAPTER SETTINGS FUNCTION MEDIA PLAYER When building the media library is over it will be possible to use Blue amp Me Nav to to select and play tracks HOW TO MANAGE THE MEDIA LIBRARY With the media player you can select the audio files stored on your USB device using voice commands or steering wheel buttons You can scroll audio files by folder artist genre album or playlist and then select the required category using voice commands Mfter selecting the required category select the required file using manual controls Enter track data e g title artist album genre for surfing your media library friend ly 29 BLUE amp ME nav BLUE amp ME nav 30 Note Not all formats require to enter media info Formats mp3 and wma recognized by Blue amp Me Nav require media info whereas wav not If no media info is en tered audio files can only be selected by folder 2 For further details refer to section PRAC TICAL HINTS FOR USING THE MEDIA PLAY ER Selection by folder Track fo
70. ess 28 and pronounce Exit Blue amp Me Nav SUPPORTED MOBILE PHONES Blue amp Me Nav supports your personal devices via the Bluetooth wireless tech nology and USB MOBILE PHONES WITH BLUETOOTH WIRELESS TECHNOLOGY Blue amp Me Nav supports most of the mo bile phones supporting Bluetooth 1 1 and HandsFree 1 0 profile refer to Bluetooth wireless connection specifications given on your mobile phone owner s manual Due to the different marketed software ver sions for mobile phones certain auxiliary func tions e g answering a second incoming phone call transferring phone call from hands free phone system to mobile phone and vice versa etc could not exactly correspond to what described in this manual In any case phone conversation using the hands free phone kit is not impaired 63 BLUE amp ME nav BLUE amp ME Nav 64 Pull phones phonebook automatically downloaded Pull phone means that your mobile phone supports phonebook automatic download with Bluetooth wireless technology your whole phonebook will be automatically downloaded to Blue amp Me Nav during phone pairing procedure To consult the list of mobile phones and functions supported consult the dedicated website www alfaromeo com Blue amp Me Nav or Customer Services on 00800 2532 0000 You will also find quick guide with advice on usage CJ a guide for using your mobile phone for recording
71. ete users The system will ask Delete all paired users To confirm pro nounce Yes O Always remember that if a mobile phone is paired with the system while another phone is connected yet connection with the current phone is interrupted to es tablish the connection with the new phone It is not possible to delete a pairing un less it is the only one CJ Deleting all paired users will entail a new pairing procedure Delete the phonebook In the USER DATA menu you can delete the phone that was downloaded to the sys tem To delete the phonebook using man amp ual interaction proceed as follows Select DELETE PHONEBOOK and then press OK or v The system will display the question DELETE COPY OF PHONE BOOK FROM SYSTEM To con firm press OK or v Or using voice interaction ay Press pronounce Settings wait shortly for feedback and then pronounce Delete phone book The system will ask Delete copy of phonebook from the sys tem To confirm pronounce Yes 55 BLUE amp ME nav BLUE amp ME Nav 56 Download the phonebook If you chose not to download the phonebook during the phone pairing procedure or if you recently deleted the current phonebook the USER DATA item will be available in the COPY PHONEBOOK menu To download a paired mobile phone phonebook using manual interaction proceed as follows Select COPY PHONEBOOK and the
72. eyword leading to another level is given or the in teraction is interrupted the same rule ap plies for the other lower levels 2 and 3 level gt For the list of available keywords refer to section VOICE COMMANDS KEYWORDS SUMMARY Valid means that the keyword pronounced is included in the Blue amp Me Nav dictionary and that can therefore be recognized by the system for the concerned level To repeat the last system voice announce ment press a for longer than 1 second or press shortly and pronounce Repeat The system can issue voice announcements A voice announcement is a spoken message initiated by the system To cancel a voice an nouncement press ESC or press a and pronounce Cancel A voice interaction is a two way communi cation spoken exchange between system and user To initiate a voice interaction press AS and issue a command To interrupt a con versation and start a new one press 48 at any time during the conversation and pro nounce a vocal command To stop an ongoing interaction press ESC You will hear a tone indicating when voice recognition is deactivated The hands free kit help option can speak the list of commands available to you at any time depending on the keyword level that you are currently on To use the help sys tem say Help Listen to the list of cur rently available commands and decide on which command you d like to issue to the system Adjust the vol
73. f tracks in the playlist using your media file software Delete bad media from your USB device CJ To change the current audio source press button OK or the dedicated buttons AM CD on the sound system front panel CJ With ignition key at MAR insert and then remove the USB device dram the car USB port avoid displaying of MEDIAPLAYER indication in absence of USB device always remove the USB device when the ignition key is at MAR or stop play back with voice command STOP before removing the USB device from the car USB port Problem Displayed message PROTECTED CONTENT Or amp Nav says Protected content Blue amp Me Nav does not play all the digital audio files in the playlist The media library does not show all the digital audio files stored on the USB device After pronouncing a command Blue amp Me Nav says Command not available although the command you prompt is a first level voice command Probable Cause The track selected is DRM protected and it cannot be played by the media player Your playlist contains DRM protected files that cannot be played or it contains references to invalid media files files that are ignored during playback Your playlist contains more than 20 000 tracks that is the max number of files that can be copied to the media library The playlist stored on your USB device contains more than 20 nested f
74. further information refer to paragraph How to read the last SMS text received s Or using voice interaction if you pronounce Yes Blue amp Me Nav will read the message taking into account any abbreviation con tained in the text otherwise say No the system will store the mes sage so you can read it later for fur ther information refer to paragraph How to read the last SMS text received HOW TO READ THE LAST SMS TEXT RECEIVED After receiving a message Blue amp Me Nav will store it both read or not read mes sage in the inbox refer to paragraph In box A To read the last message received amp open Blue amp Me Nav Main menu and select option MESSAGE READER then press OK or v Select the option READ LAST and press OK or Blue amp Me Nav will read the last message received amp Or using voice interaction Press a and pronounce Read last one Blue amp Me Nav will read the text of the last message re ceived INBOX Blue amp Me Nav will store up to 20 re ceived messages in the event of linked mes sages the number of stored messages could be lower when your mobile phone is paired with Bluetooth When the inbox is full the new incoming message will delete the oldest message received also if not read yet It is also possible to delete just one message or to delete the entire inbox refer to paragraph Managing messages A To read the last message re
75. h the Main Menu select MEDIA PLAYER and then press OK or Select ALBUMS and then press OK or Scroll albums To select the displayed album press OK or v Scroll the album tracks To play all the tracks in the album select PLAY ALL and press OK or v To play an album select it and then press OK or To play just one track select the track title and press OK or v Or using voice interaction Press and pronounce Albums Scroll albums To select the displayed album press OK or v Scroll the album tracks To play all the tracks in the album select PLAY ALL and press OK or v To play just one track select the track title and press OK or v Note If your USB device contains many audio files the ALBUMS menu can be subdi vided into alphabetical sub menus Alpha betical sub menu can display just the first letter of the tracks it contains e g A F or it can display the first two letters e g Aa Ar Selection by playlist Playlists stored in your USB device can be displayed with the PLAYLISTS menu A To select a playlist using manual in amp teraction proceed as follows Launch the Main Menu select MEDIA PLAYER and then press OK or Select PLAYLISTS and press OK or Scroll playlists To play the displayed playlist press OK or v M Or using voice interaction Press 29 and pronounce Playlists Scroll playlists To play the displayed playlist press OK or
76. horized Ser vices for updating To get updated information about Blue amp Me Nav consult the dedicated site at www alfaromeo com IMPORTANT Blue amp Me Nav system updating may not be available yet Consult the dedicated site at www alfaromeo com to obtain additional info about this function and its activation procedure CJ To download and manage updatings on Blue amp Me Nav make sure that a GPRS Data Plan is active on your phone number Otherwise request it to your mo bile phone carrier O Your mobile phone shall be enabled for da ta phone communication Enabling can be implemented by your mobile phone carri er or you can refer to section concerning the Equipment for General Packet Radio System GPRS on your mobile phone manudl CJ To download and manage updatings on Blue amp Me Nav your mobile phone shall be paired to the system Updating Blue amp Me Nav To download and to set updatings use the SYSTEM UPDATE menu To start updating using manual inter amp action proceed as follows Press and move to SETTINGS SYSTEM UPDATE Then Press OK or v Blue amp Me Nav will display the message SYS TEM UPDATE and start the updat ing procedure If no update is available Blue amp Me Nav will display the message NO UPDATE AVAILABLE and say No update available Otherwise Blue amp Me Nav will complete the updating procedure BLUE amp ME 57 nav BLUE amp M
77. ill also find a quick guide with advice on usage CJ a guide for using your mobile phone for recording CJ advice on connection to an iPod CJ files in the 9 voice recognition languages available that can be downloaded onto Blue amp Me Nav Italian French English Ger man Spanish Portoguese Dutch Polish Brazilian Portoguese MESSAGE READER Problem receive SMS messages on the cellular telephone but not on Blue amp Me Nav SMS texts received from your phone carrier service center show abnormal displaying of sender s name or number Blue amp Me Nav stopped receiving messages from your cellular telephone You cannot display some SMS messages present on your cellular telephone on Blue amp Me Nav SMS message list Probable Cause Not all cellular telephones support SMS messages transfer to Blue amp Me Nav Not all mobile phones support correct transfer of the phone carrier s name sending the SMS text to amp Nav You might have set by mistake the option NOT ACTIVE from menu notification settings Blue amp Me Nav is capable to read and store last 20 received SMS messages while the telephone set is connected to the system Messages received in other contexts are not transferred to Blue amp Me Nav Possible Solution Check that your cellular telephone supports the function for transmitting SMS Messages by Bluetooth technology or for further informat
78. ill display information about the last caller and ask if you would like to call back this contact To respond with yes pronounce Yes otherwise say No To redial the last phone number you called pronounce Redial The sys tem will display information about the last contact you called and will ask if you would like to redial this phone number To redial the last phone num ber called say Yes otherwise say No INCOMING CALLS With the hands free phone system you can respond to incoming phone calls using steer ing wheel buttons When a phone call is re ceived the system will display information about the caller s identity if available The incoming phone call will have cus tomized ring tone if this function is avail able on your mobile phone Answering a phone call CJ To answer the phone call press v To end the phone call press v for longer than 1 second Rejecting a phone call To reject the phone call press v for longer than 1 second Ignoring a phone call J To ignore the phone call and mute the phone call ring tone press ESC Answering an incoming phone call during an active phone conversation To answer an incoming phone call while an other phone conversation is active press v The system will switch to the incoming phone call and put the current phone con versation on hold Certain mobile phones support the ability to transmit your contacts
79. in the list Enable or not point of interest alerts Picnic area Train Station Train station Trains Vehicle service Vehicle service Petrol station Service stations Petrol station Petrol stations Chemist Lye Chemists Restaurant I Restaurants Hotel La PDI Personal Personal points of interest Personal lt My POI Select the Picnic Area category Select the Train Station 3 category Select the Vehicle Service category Select the Service Station category Select the Chemist category Select the Restaurant category Select the Hotel category Select personal points of interest 75 BLUE amp ME Nav BLUE amp ME nav 76 SETTINGS FUNCTION VOICE COMMANDS Setup Setup menu Settings Enters the SETTINGS menu Media settings Enters MEDIA PLAYER menu Shuffle Random order Shuffle on off Loop Loop track Cyde Loop on off Autoplay Autoplay media Autoplay music Autoplay on off when connecting the USB device to the relevant port in the car Enters the USER DATA menu Starts the process to create a pairing relationship Update Updates Activates Blue amp Me Nav updating Pause Update Pause Updates gt e Interrupt Updates Interrupt Update Pauses temporarily the current updating procedure Resume Up
80. ion see chapter LIST OF TELEPHONE SETS SUPPORTED BY Blue amp Me Nav or site www alfaromeo com Blue amp Me Nav or Customer Services on 00800 2532 0000 Set on menu notification settings either VISUAL ACOUSTIC notification or NOT VISUAL notification READER FUNCTIONS SMS MESSAGES paragraph NOTIFICATION SETTINGS SMS messages stored by Blue amp Me Nav can be deleted gt READER FUNCTIONS SMS MESSAGES paragraphs SMS MESSAGES MANAGEMENT AND DELETING ALL SMS MESSAGES 85 BLUE amp ME Nav BLUE amp ME Nav 86 Problem Some SMS messages or part of them are not read or are not correctly read by Blue amp Me Nav hands free kit Blue amp Me Nav SMS messages reader displays sender telephone number instead of sender name Sometimes received SMS message sender cannot be called Probable Cause Some special characters within received SMS message cannot be interpreted by Blue amp Me Nav Probably during portable phone registration step you chose not to download the telephone book or if your portable phone only supports the management of single contacts you chose to download some contacts only Some SMS messages e g the ones sent by telephone operator have no associated sender telephone number so option CALL cannot be used Possible Solution To download your cellular telephone book refer to special item on menu Settings gt SETTING FUNCTIONS pa
81. is able to provide estimated time of ar rival and distance to a preset destination It also allows you to display your car s po sition latitude longitude and number of GPS satellites received Recent destinations you may choose one of the destinations recently preset stored by the system in a special list O Navigation settings you can set your preferences for the route type e g motorways toll roads or ferries O Route simulation Blue amp Me Nav allows you to simulate the type of route to your set destination in advance ROAD SAFETY VN certain parts of this ip while driving can distract your attention away from the road and possibly cause an accident or other serious consequences for this reason certain func tions shall only be vsed when driving conditions are secure and if required only when the car is stopped VN Read and Follow Instructions before using your system read and follow all instructions and safety information provided in this end user manual User s Guide Not following precautions found in this User s Guide can lead to an accident or other serious consequences Keep User s Guide in the car when kept in the car the User s Guide will be a ready reference for you and other users unfamiliar with the sys tem Please make certain that before using the system for the first time all persons have access to the User s Guide and read its instructions and safe ty information carefully
82. ition to be heard by the system since the microphone is prop erly located and oriented to this purpose Voice commands which are words recog nized by the system are identified as key words The hands free phone system recognizes and responds to a preset list of voice commands The list of available voice commands depends on the keyword level that you are currently on The current list is always available by pressing and pronouncing Help or pronouncing Help after whichever ques tion of the system Blue amp Me Nav adl so recognizes personalized versions of voice commands like the name of a contact in your phonebook There is no voice training required for us ing voice commands with this system To issue a voice command to the system press and wait for the tone indicating that voice recognition is active Then speak the command in your natural voice at a mod erate pace When the system recognizes the command it will acknowledge your com mand by speaking a response or acting on your command Voice commands are organized according to three increasing levels 1 level 2 level and 3 level When a valid 1 level keyword is pro nounced the system will activate 2 level keywords when a valid 2 level keyword is pronounced the system will activate 3 level keywords If the user pronounces a valid 1 level key word then the submenu relevant to that command will remain active until a k
83. lders on your USB device are dis played in the FOLDERS menu To select tracks through manual in amp teraction proceed as follows Launch the Main Menu and select MEDIA PLAYER then press OK or Select FOLDERS then press OK or Scroll folders To play all folders select PLAY ALL and then press OK or v To display folder tracks press OK or v Scroll the selected folder tracks To play the required track select the title and then press OK or v Or using voice interaction Press and pronounce Folders Scroll folders To play all folder select PLAY ALL and then press OK or v To display folder tracks press OK or Scroll the selected folder tracks To play the required track select the title and then press OK or A For further details on FOLDERS menu cus tomization see section PRACTICAL HINTS FOR USING THE MEDIA PLAYER Selection by artist To select the tracks of a special artist z using manual interaction proceed as follows Launch the Main Menu select MEDIA PLAYER and then press OK or Select ARTISTS and then press OK or Scroll artists To select the required artist press OK or v Scroll the artist s albums To play all the albums of the required artist se lect PLAY ALL and press OK or v To play an album select the required album and then press OK or v To play a track select the title and then press OK or v Or using voice interaction
84. le phone 0 Register the mobile phone gt SETTING FUNCTIONS REGISTER MOBILE PHONE O Ensure the mobile phone you have registered on the car s handsfree system is within the system s radius of action J Ensure that the Bluetooth connection to the cars handsfree system Blue amp Me identifier is activated on your mobile phone g You can delete entire list of recent desti nations by selecting the DELETE ALL option or by speaking the command delete all with voice interaction gt NAVIGATION FUNCTIONS RECENT DESTINATIONS PERSONAL DATA PROTECTION The functions offered by the Blue amp Me Nav device involve the processing of personal data To protect unauthorised access to this in formation the device has been constructed to ensure that 3 Personal data linked to the handsfree functions phonebook recent calls and text message inbox are accessible only following auto matic recognition of the user s mobile phone by means of Bluetooth technology O Personal data on the device phonebook recent calls text message inbox and recent destinations may be deleted using specific Blue amp Me Nav functions gt For further information on the deletion of personal data phonebook recent calls and text message inbox refer to the section SET TING FUNCTIONS USER DATA gt For further information on deleting recent destinations refer to the section NAVIGATION FUNCTIONS RECENT
85. lect START push OK or v Or vocally after pushing amp amp say Start If the address or point of interest re quested has a phone number combined with it and your Bluetooth mobile phone is connected to Blue amp Me Nav you can make a phone call ay A Shift A or W on the Dri amp veMe menu and select CALL pushing OK or v gt Or vocally after pushing ag say e CALL At the end of the call the system will give you the possibility to start navigating to wards the address received by means of the DriveMe service Note If you do not want to start navigating to wards the address displayed push on the MUTE button on the radio set The address and relevant phone number will be howev er saved on RECENT DESTINATIONS and called further on 43 BLUE amp ME nav BLUE amp ME Nav 44 Resume navigation Blue amp Me Nav allows you to resume navigation toward a set destination if navi gation has been suspended using the STOP NAVIGATION command _ To resume navigation using manual interaction Activate the main Menu select the NAVIGATION option and then press OK or 5 Select the RESUME NAVIGA TION option by pressing OK or v Blue amp Me Nav will ask you to confirm the operation press OK or v to confirm or ESC to cancel the above operation With voice interaction press amp and say Navigation and then once you have heard the system message say
86. left side of the fourth row of the display Once you have entered two characters if you press the A key once you will be given the option of deleting the last character entered press OK or v to delete Press the key again to con tinue entering characters O KEY w Allows you to scroll through the charac ters shown on the right side of the fourth row of the display Once you have entered two characters if you press the W key once OK will be displayed on the third row of the display This prompts you to stop enter ing characters and instead choose the town city name from a list You are on ly advised to use this option if the name of the town city shown on the second row is the full name of the required town city Press OK or v to confirm Press the W key again to continue en tering characters O KEY ESC Press the ESC key to return to the pre vious menu 39 BLUE amp ME nav BLUE amp ME Nav 40 Y gt Proceed as follows to en BN ter the town city name Scroll through the characters in the fourth row using the A or W keys until the required characters are displayed on the third row Press OK or v to select the character Proceed in the same way to select the fol lowing characters that make up part of the town city name in the second row Press the A key to delete the last char acter entered The system will ask you to confi
87. n Autoplay media on Autoplay music on Autoplay off Autoplay media off Autoplay music off Play anything lay something Activates automatic playback when connecting the USB device to the relevant port in the car Deactivates automatic playback when connecting the USB device to the relevant port in the car Activates playback of all digital audio tracks Enters MEDIA PLAYER menu 73 BLUE amp ME Mav nav BLUE amp ME 74 NAVIGATION SYSTEM VOICE COMMANDS Navigation Navigator Activate the NAVIGATION menu Next maneuver Maneuver e Next Next maneuver Repeat the last voice message during navigation continued Resume navigation Resume Activate Navigate Resume previously interrupted navigation Arrival information Information Arrival Provides an estimated time of arrival and estimated distance from destination Interrupt navigation e Interrupt navigation Suspend Interrupt Interrupt a navigation session New destination New New Destination New route Call up the menu to enter a destination Enter number Enter house number Civic number Number Used to enter destination address house number Local Locally Nearby Used to select a point of interest near the car e Start Elsewhere Start Other place Ly St
88. n _ 25 MESSAGE READER FUNCTIONS 26 How to read the last SMS text received 26 crc E EEA 27 Managing messages 27 Deleting all 00 5 28 Signal types sess 28 MEDIA PLAYER FUNCTIONS 29 How to connect the USB device to Blue amp Me Nav 29 How to manage the media library 29 Selection by folder sess 30 Selection by artist eese 31 Selection by genre 3 Selection by album 32 Selection by playlist 32 Playing audio tracks 33 Shuffle playback of the whole media library 33 Now playing track data 33 Audio play esses 33 MEC EM 33 34 Aun E E EEE 34 ENIES U NGC SA 34 Previous track essere 34 Changing audio source 34 BLK LL 34 Practical hints for using the media player 35 messer ertet duet n cete der 35 Organizing media files
89. n press OK or v Or using voice interaction ay Press pronounce Settings wait shortly for feedback and then pronounce Download phone book Add contacts If your mobile phone does not support au tomatic downloading during phone pairing the USER DATA item will be available in the ADD CONTACTS menu To copy contacts from your mobile amp phone to the handsfree phone system using manual interaction proceed as follows Select ADD CONTACTS and then press OK or Or using voice interaction ay Press pronounce Settings wait shortly for feedback and then pronounce Add Contacts Then follow the instructions given on your mobile phone owner s manual for transfer ring contacts Reset user data Y e To reset all user data and phone books contacts for paired phones to the default values using manual in teraction proceed as follows Select DELETE ALL and then press OK or The system will display the question DELETE ALL DATA SAVED IN THE SYSTEM To confirm press OK or Or using voice interaction Press pronounce Settings wait shortly for feedback and then pronounce Reset all The system will ask Delete all da ta saved by users from the system To confirm pronounce Yes MANAGING UPDATES Blue amp Me Nav can be updated with new functions that you can download via your mobile phone Therefore it is not nec essary to contact Alfa Romeo Aut
90. nclude sections that in volve the use of ferries A With manual interaction proceed as amp x follows Select the SET FERRIES option and then press OK or v Select YES or NO using the A or Y keys and press OK or v to con firm Or with voice interaction Press 28 and say Set ferries Blue amp Me Nav will tell you the current setting using voice synthesis and will ask you if you wish to change it Answer Yes to change the op tion No to maintain the current setting J Set tolls Use this setting to tell Blue amp Me Nav whether you wish to include sections of road that require payment of a toll in the route calculation e With manual interaction proceed as amp follows Select the SET TOLLS option by pressing OK or v Select YES or NO using the A or Y keys and press OK or v to con firm 47 BLUE amp ME nav BLUE amp ME Nav 48 i Or with voice interaction Press and say Set tolls Blue amp Me Nav will tell you the current setting using voice synthesis and will ask you if you wish to change it Answer Yes to change the op tion No to maintain the current setting O Dictate destination Use this setting to set your preference for voice completion during destination input if you wish to set DICTATE DESTINATION to NO the destination will be entered in ex clusively manual mode It will not therefore be
91. nt repeat the pairing procedure CJ At first pairing Blue amp Me Nav will say Welcome immediately after con necting This message will no longer be heard at next pairing procedures Blue amp Me Nav will ask if you would like to copy your paired phone phonebook to Blue amp Me Nav It is recommend ed to copy it To start copying the phone book say Yes otherwise say No some compatible mobile phones the names in the directory are not copied au tomatically but have to be transferred by the user using the mobile phone keypad If Blue amp Me Nav asks you to do this then perform this procedure following the instructions specific to your mobile phone and press when you have finished MAKING A PHONE CALL Assume that John is one of the contacts stored in your phonebook To call John proceed as follows Press the steering wheel button and pronounce Call John CJ If the name is recognized the system will display the recognized contact s infor mation on the display screen If there is just one phone number for John in your phonebook the system will ask if you would like to call John To start the call say Yes otherwise say No If John has several phone numbers the sys tem will ask which phone number you would like to call e g Call John at Work or at Home Answer with the type of required phone number e g at 13 BLU
92. nversation you can receive notification of another incoming phone call answer the other incoming phone call and switch between two ongoing phone conversa tions Call waiting is only supported by a subset of compatible mobile phones After you place your mobile phone in the car environment and create a pairing relationship with Blue amp Me Nav you can make phone calls by speaking keywords or press ing buttons on the steering wheel When us ing the hands free phone the audio output of a phone conversation is heard through your car sound speakers MESSAGE READER Function only available with compatible mobile phones The Blue amp Me Nav message reader en ables automatic reading through the car sound system of the SMS texts you receive on your Bluetooth wireless technology mobile phone The message reader will al so interpret any abbreviation and emoticon contained in the SMS text Message reader functions are managed by the control buttons on the steering wheel or by the Blue amp Me Nav voice com mands The amp Nav message reader en ables the following operations J To display on the instrument panel dis play a visual notification signal indi cating that you have received a new SMS text on your Bluetooth wire less technology mobile phone with sender s number name Blue amp Me Nav will also propose you to read the message received CJ To manage the list of SMS texts received
93. o bile device does not feature this capability You can also interact with your mobile phone manually and visually using the steering wheel controls and the instrument panel multifunction display For further details on the mobile phones sup ported by Blue amp Me Nav refer to sec tion Blue amp Me Nav SUPPORTED MO BILE PHONES To get started with Blue amp Me Nav hands free kit with voice recognition you have to simply pair your Bluetooth wire less technology enabled mobile phone with the system Pairing is an operation that has to be made only once BLUE amp ME nav BLUE amp ME Nav NOTE During the mobile phone pairing procedure Blue amp Me Nav attempts to detect a phone equipped with Bluetooth wireless technology within range and then estab lishes the connection using a Personal Iden tification Number PIN Once your phone is paired you have the op tion transfer your mobile phone contacts to the hands free kit to make a phone call either by using the contacts list or directly pronouncing the phone number to answer a call and also to answer another incoming phone call To interact with Blue amp Me Nav you can use either buttons on the steering wheel and voice commands With voice recognition you can perform system function by speak ing voice commands also identified as key words When the system recognizes a key word it will respond with the appropriate action Voice
94. of interest Then say List e Blue amp Me Nav will provide you with a list of the available categories If you al ready know which of the categories stored on your USB device you require you may say it directly gt Refer to the NAVIGATION VOICE COMMANDS section for a list of available categories The system will ask you for confirmation say Yes or press OK or Otherwise say No Now Blue amp Me Nav will prompt you to choose between local points of interest or elsewhere by means of voice syn thesis you select local Blue amp Me Nav will display a list of points of inter est belonging to the category selected previously e g restaurants sorted ac cording to distance from your current lo cation including distance and name Scroll through the list using the A or Y keys and press OK or v to select the required point of interest If you say elsewhere Blue amp Me Nav will ask you to specify the point of interest country and town city in the same way as when entering an address Blue amp Me Nav will display a list of points of interest in the chosen category in alphabetical order Scroll through the list using the A or W keys and press OK or v to select the point of in terest required Note If the point of interest selected using the pre vious options has a telephone number and your Bluetooth mobile phone is con nected to Blue amp Me Nav the
95. olders Nested folders files will not be copied to the media library Certain commands are not available when the track is paused or the CD player is playing a track Possible Solution For further details see section SUPPORTED USB MEMORY DEVICES CJ Your playlist contains DRM protected playback by pressing ESC Then pronounce the voice command again If the track is paused resume 89 BLUE amp ME Nav BLUE amp ME nav 90 Problem Probable Cause The same USB memory device You removed the USB memory device previously connected takes from the PC before it was ready more than 10 seconds to restart playback on Blue amp Me Nav Possible Solution To reset the USB memory device using Microsoft Windows XP click on My Computer in the Start menu click rightwards on the USB memory device select Properties select Tools click on key Check Now in field Error checking select Automatically fix file system errors and then click Start To avoid future problems remove the USB device using the option Secure hardware removal iPod Problem iPod not working Probable Cause The iPod could have beeno updated with software that is not compatible with Windows Mobile as Blue amp Me Nav is a system developed in partnership with Microsoft only systems that support Windows Mobile are compatible The iPod has not been enabled for Use as a di
96. omatically only if using the same mobile phone used for starting the updating procedure Blue amp Me Nav will pause automati cally the updating procedure if the paired mobile phone is no longer available or if updating is paused by the Service Centre if communication is stopped e g tun nels or if the system slows down too much its working speed Blue amp Me Nav will try to resume updating at preset time intervals Should it be not possible to resume updating while driving updating will be resumed at next engine starting gt If you encounter difficulties with any of these operations consult section HANDS FREE KIT TROUBLESHOOT ING 59 BLUE amp ME nav BLUE amp ME Nav 60 ADVANCED OPTIONS To navigate to the ADVANCED amp OPTIONS menu using manual in teraction proceed as follows Press v to open the Main Menu then select SETTINGS by pressing OK or Select ADVANCED OPTIONS and then press OK or v Or using voice interaction ay Press pronounce Settings and then Advanced Options You can access the SYSTEM CODE in the ADVANCED OPTIONS menu and change the GPRS CODE The SYSTEM CODE is an 8 digit number device ID which uniquely identifies the Blue amp Me Nav system installed on your car and cannot be changed Accessing the device ID For certain operations it might be necessary to know the Blue amp Me Nav system code To access the system code by
97. on in or der to connect your mobile phone with Blue amp Me Nav CJ Before transferring your mobile phone contacts to the hands free system make sure that each contact first and last name is unique and distinctly recognizable so that the voice recognition system will function properly not all mobile phones support automatic downloading of the di rectory O The system will download only valid con tact entries A valid contact entry must in dude both a name and at least one phone number If you would like to re pair your mobile phone delete the old pairing relationship first During this operation all user data will be deleted To delete the old pairing rela tionship use the menu option USER DA TA DELETE USERS On your mobile phone delete Blue amp Me from the list of Bluetooth devices following the spe cific instructions for your mobile phone re fer to your mobile phone owner s manu al If you download a phonebook with a con tacts list including more than 1000 con tacts the system may operate slower than expected and voice recognition of the names in your phonebook may de grade CJ If the pairing relationship is accidentally deleted the pairing procedure shall be re peated MANAGING USER DATA You can make adjustments to the user da ta used by the hands free phone system Specifically you can reset all user data for paired phones delete the phonebook or re set both user data and phon
98. on your Blue amp Me Nav paired mo bile phone CJ To read again the messages received and stored To call the SMS text sender using the buttons on the steering wheel or voice commands To delete individual messages or the en tire inbox using the buttons on the steer ing wheel or voice commands The Blue amp Me Nav system can also rec ognize and read abbreviations if any e g LUVU will be read like I love you and interpret the most usual emoticons e g will be read like Smile adopted nowa days to write SMS texts BLUE amp ME Nav BLUE amp ME nav MEDIA PLAYER With the Blue amp Me Nav media player you can play via the car sound system the digital audio files stored on a USB device by simply connecting it to the USB port located in the car In this way while you are driving you can play your favourite personal music collec tions The media player enables the following op erations O iPod player see dedicated para graph O Digital audio playback you can play all your digital audio files mp3 wma wav or play a customized playlist m3u or wpl format O Audio file selection by category you can play all audio files of a certain cat egory e g album artist or genre O Playback options while playing tracks you can select the following options Play Stop Next track Previous track Shuffle and Loop track NOTE The media player doe
99. ophone on off during a phone conversation Mute the ring tone of an incoming call ge Activate voice recognition Repeat the last A 5 2 Interrupt voice announcement provide new voice command utterance in a voice interaction Notes CJ For many tasks the steering wheel buttons OK and can be used interchangeably and you can use the key that is more convenient for you to press O For both operating modes of steering wheel buttons short or long press the function chosen will be activated when you release the button BLUE amp ME nav Controls Button Short press function Long press function less than 1 second more than 1 second A V Scroll Blue amp Me Nav menu items Direct access to the menu of the multimedia reader during the visualization of the information relative to the track in reproduction Scroll inbox messages Special navigation functions see NEW DESTINATION section jo Operation of keys when entering a town city name Select media player tracks OK Confirm manually selected menu option Switch phone conversation from the hands free phone to your gt mobile phone and vice versa vivavoce al telefono cellulare e viceversa n Select displayed message C Blue amp Me Nav NAV Start Navigation Menu DIRE Display incoming information with active navigation where provided SOS Access to SOS service _ Access to Info service
100. or the SETTINGS menu O You can then pronounce one of the avail able commands and proceed with the di alogue as you like O If you need further help press and pronounce again Help PAIR YOUR MOBILE PHONE IMPORTANT Carry out this operation on ly with the car stopped To pair your mobile phone proceed as fol lows O Press 229 and pronounce Settings then at the end of the Blue amp Me Nav message say Pairing O The system will show the phone pairing PIN number on the multifunction display For the next two steps consult your mo bile phone owner s manual about Blue tooth pairing On your mobile phone query for devices equipped with Bluetooth wireless technology the setting on your mobile phone might be called Discover or New Device n this list you will find Blue amp Me name identifying the Blue amp Me Nav system on your car select it J When prompted by the mobile phone en ter the PIN number shown on the instru ment panel display using your mobile phone keypad If pairing is successful the system will say Connecting and at the end the display will show as confir mation message the ID of the paired mo bile phone It is essential to wait until you see this con firmation message on the display Pressing v or ESC before the message is displayed may cancel the pairing process If the pair ing process fails an error message will be displayed in this eve
101. ou can talk without be ing listened to by the caller press ESC CONFERENCE CALL FUNCTION only with Bluetooth phones supporting this function With the Conference Call function you can call another contact while you are engaged in a phone conversation yet In this way you can speak with both contacts at the same time To start a Conference call while you are still engaged in a phone conversation call the second required contact as described in sec tion MAKING A PHONE CALL When Conference Call option is active the display will show CONFERENCE To end both calls press button v for long 25 BLUE amp ME nav BLUE amp ME nav 26 MESSAGE READER FUNCTIONS compatible mobile phones only If your mobile phone with Bluetooth wireless technology supports the message reader function at the arrival of a new SMS text Blue amp Me Nav plays a tone and it will ask if you would like to read it ac cording to set signal types To consult the list of mobile phones and func tions supported consult the dedicated web site www alfaromeo com Blue amp Me Nav or Customer Services on 800 2532 0000 gt For information on signal types refer to paragraph Signal types If you want Blue amp Me Nav to amp read the SMS message received by manual interaction press OK or v Otherwise press ESC Blue amp Me Nav will not read the message but it will store it so you can read the mes sage later for
102. p A s Software Suppliers their affiliates and or their designated agent make available Supplemental Components and no other EULA terms are provided then the terms of this EULA shall apply except that the Fiat Auto S p A s Software Suppliers or affiliate entity providing the Supplemental Component s shall be the licensor of the Supplemental Components Fiat Auto S p A Fiat Auto S p A s Software Suppliers their affiliates and or their designated agent reserve the right to discontinue any Internet based services provided to you or made available to you through the use of the SOFTWARE Links to Third Party Sites The SOFTWARE may provide you with the ability to link to third party sites through the use of the SOFTWARE The third party sites are not under the control of Fiat Auto S p A s Software Suppliers their affiliates and or their des ignated agent Neither Fiat Auto S p A s Software Suppliers nor their affiliates nor their designated agent are responsible for i the contents of any third party sites any links contained in third party sites or any changes or updates to third party sites or ii web casting or any other form of transmission received from any third party sites If the SOFTWARE provides links to third party sites those links are provided to you only as a convenience and the inclusion of any link does not imply an endorsement of the third par ty site by Fiat Auto S p A s Software Suppliers their affiliate
103. p Me Nav Main menu select the option MESSAGE READER and then press OK or v Select the option SIGNAL TYPE and scroll the three available options using buttons or select the re quired option and then press OK or A Or using voice interaction t Press and pronounce Message reader after the acoustic signal say Signal type Blue amp Me Nav will list the avail able options and then you can select the required one by pronouncing Reader off or Visual and acoustic signal or Visual sig nal only MEDIA PLAYER FUNCTIONS The MEDIA PLAYER menu enables the following to display tracks stored on your USB de vice J to play audio files stored on your USB de vice Note Before using the player in order to make sure that your USB device is compatible with Blue amp Me Nav read the section on COMPATIBLE USB MEMORY DEVICES or the paragraph about iPod HOW TO CONNECT THE USB DEVICE TO Blue amp Me Nav To connect your USB device to Blue amp Me Nav proceed as follows 0 tracks on your USB device Blue amp Me Nav recognizes wma mp3 and wav formats for audio files and wpl and m3u for playlists CJ USB devices without USB wire just con nect the USB device directly or by an ex tension lead to the USB port on the car see fig 1 The multimedia player does not play audio files covered by digital rights DRM ACC files downloaded from iTun
104. phones This submenu enables to read the last message received to call the message sender or to delete the last message received It is possible to store up fo 20 received messages in the dedi cated inbox and to play them later to call the message sender or to delete the mes sages It is possible to select notification signals for the arrival of a new SMS text O MEDIA PLAYER this submenu allows to scroll the digital audio tracks in the li brary by folder artist genre album or by playlist This sub menu is to be used to select and play tracks O iPod PLAYER see dedicated paro graph O NAVIGATION this submenu gives ac cess to Blue amp Me Nav navigation functions You can enter a new destination use a recent destination alter the navigation settings gain access to information on the vehicle s GPS position or simulate a previously calculated route O SETTINGS this submenu makes it pos sible to manage the names in your phone list register a new device manage the multimedia player settings or access the hands free system identification code Launching the Main Menu To launch the Blue amp Me Nav Main Menu press v you can then interact with the system through the buttons on the steer ing wheel Navigating the menu options To navigate through the items in a menu press or V When the number of characters in a display message is too long for the allowable num ber of display charac
105. possible to complete the town city or road name by voice With manual interaction proceed as amp follows Select the DICTATE DESTINA TION option by pressing OK or v Select YES or NO using the A or Y keys and press OK or v to confirm c Or with voice interaction Press 28 and say Dictate desti nation Blue amp Me Nav will tell you the current setting using voice synthesis and will ask you if you wish to change it Answer Yes to change the option No to maintain the cur rent setting It may be useful to disable the dictate des tination function if the map used contains information in a language other than that set for voice recognition in the Blue amp Me Nav system gt For further information consult the PROBLEM SOLVING NAVIGATION SYS TEM g POI Alert This Blue amp Me Nav option allows to se lect one or more POI categories and receive a message when you are about to approach them With manual interaction follow the instructions below Select POI ALERT and push OK or The system will ask to set the Points of in terest categories and the distance where the nearness alert is to be set on the following menu J SELECT POI J SELECT DISTANCE Select the option desired shifting A or W and push OK o to confirm If you chose SELECT POI Blue amp Me Nav will suggest a list of Points of inter est categories available for each category if
106. ragraphs CELLULAR TELEPHONE REGISTRATION and USER DATA MANAGEMENT MEDIA PLAYER Problem Displayed message NO MEDIA FOUND Or Blue amp Me Nav says No media found After connecting your USB device and turnin the ignition key to MAR no music is played After inserting a USB device and turning the car key to the MAR position Blue amp Me Nav malfunctions occur e g failure to reproduce musical tracks or no voice messages Probable Cause No USB device connected to the USB port in the car CJ No digital audio file stored on the USB memory device If power supply is interrupted e g car battery disconnection Blue amp Me Nav will loose power temporarily In this event media library shall be rebuilt Your USB memory device is not supported by Blue amp Me Nav Building the media library may require a few minutes You may have used a USB device with the PASSWORD function enabled Possible Solution g Follow the instructions to connect your USB device to Blue amp Me Nav CJ Store digital audio files on your USB memory devices following the instructions given by your media file software J Remove the USB device from the USB port and refit it to build again the media library Check whether your USB device is supported by Blue amp Me Nav Wait for library building If the time required to build the library is excessive you can intervene by reducing
107. re products as well as associated media printed materials and online or elec tronic documentation SOFTWARE are protected by international intellectual property laws and treaties The SOFTWARE is licensed not sold All rights reserved IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT EULA DO NOT USE THE DEVICE OR COPY THE SOFTWARE IN STEAD PROMPTLY CONTACT FIAT AUTO S p A FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE S ANY USE OF THE SOFTWARE INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA OR RATIFICATION OF ANY PREVIOUS CONSENT GRANT OF SOFTWARE LICENSE This EULA grants you the following license You may use the SOFTWARE as installed on the DEVICE DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS Speech Recognition If the SOFTWARE includes speech recognition component s you should understand that speech recognition is an inherently statistical process and that recognition errors are inherent in the process Neither Fiat Auto S p A nor its suppliers shall be liable for any damages arising out of errors in the speech recognition process Limitations on Reverse Engineering Decompilation and Disassembly You may not reverse engineer decompile or disassemble the SOFTWARE except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation Single EULA The end user documentation for the DEVICE may
108. rm the deletion by pressing OK or v If you are using voice interaction press as and say Delete As soon as you have entered enough char acters Blue amp Me Nav may prompt you to say the required town city Press and say the name of the town city You still have the option of continuing to en ter the destination town city manually Depending on the number of characters en tered Blue amp Me Nav will display a list of towns cities whose names meet the cur rent search criteria Scroll through the list us ing the A or V keys and press OK or v to confirm Alternatively you may say the name of the required town city direct ly If the system is able to detect the car s GPS position it will suggest the town city where you are currently located as the destination town city CJ If the town city name is made up of sev eral words you only need to enter one of the words making up the town city name CJ If the name of the town city displayed in the second row see fig 4 is the full name of the required town city you can stop entering characters and select the town city from the list by pressing Y once The message OK will ap pear on the third row of the display Press OK or v to confirm If using voice in teraction press and say OK gt If you wish to disable voice input of the town city refer to the NAVIGATION SETTINGS DICTATE DESTINATION sec tion Once you have sele
109. rors It is your re sponsibility to monitor any speech recognition functions included in the system and address any errors Distraction Hazard any features may require manual non verbal setup Attempting to perform such set up or insert data while driving can seri ously distract your attention and could cause an accident or other serious consequences Stop the vehicle in a safe and legal manner before attempt ing these operations BLUE amp ME Nav nav BLUE amp ME DISPLAY AND BUTTONS ON SOUND SYSTEM AND STEERING WHEEL Blue amp Me Nav direct function keys near the front courtesy light where provided MATH PN FHOHEROOK w Controls Button Short press function Long press function less than 1 second more than 1 second Launch Blue amp Me Nav Main Menu Reject an incoming Confirm selected menu option phone call Accept an incoming phone call End a phone call Switch between two ongoing phone conversations hang up call waiting Select text message displayed ESC Cancel voice recognition Cancel a voice announcement STEERING Interrupt message reading WHEEL Exit Blue amp Me Nav Main Menu Exit the sub menu and return to the previous menu option Exit current menu option without storing settings Turn the micr
110. s 70 Media player voice commands 71 Settings function voice commands 76 TROUBLESHOOTING 77 Hands free 77 General display screen 77 Message 85 Media player esses 87 n LN ee 9 Navigation system 93 PERSONAL DATA PROTECTION 95 SYSTEM SOFTWARE USE NOTICE 96 Hands free kit with Bluetooth wireless technology message reader media player and navigation system OVERVIEW Blue amp Me Nav Nav based on Windows Mobile is a personal telematic system that allows the use of communication enter tainment and navigation applications specif ically designed for in car use The Blue amp Me Nav system fitted on your vehicle has the following functions hands free SMS text reader not all mobile phones support this function multimedia player and navigator it is also prepared for additional services that will become avail able in the course of time The Blue amp Me Nav system fully inte gral with voice commands buttons on the steering wheel and multifunction display message
111. s gives you the possibility of in teracting with your Bluetooth wireless technology mobile phone even if you keep it in your pocket or bag without having to take your eyes off the road or removing your hands from the steering wheel To use voice commands you are not required to train the voice recognition system to recognize your voice This implies that the system is nearly equal ly performing with different persons i e the voice recognition system is of the speaker independent type With this system you can also play your favourite music stored on USB device and select tracks and playback modes with both voice commands or buttons on the steering wheel THE HANDS FREE KIT The basic characteristic of this hands free kit is voice recognition with Bluetooth wire less technology With this system you can make and receive calls safely and securely using either voice commands or buttons on the steering wheel under whatever driving condition without having to take your eyes off the road or removing your hands from the steering wheel as required by current law regulations Bluetooth wireless technology enables wireless connection between your mobile phone and the hands free kit installed on your car To use the hands free kit you need a Blue tooth wireless technology enabled mobile phone This handsfree kit gives you the pos sibility of interacting vocally with your mo bile phone while driving even if your m
112. s or middle names initials when calling contacts by voice The system does not support the use of Possible Solution Remember that the pairing procedure will only need to be performed once for your mobile phone After this procedure Blue amp Me Nav will automatically connect to your phone each time you es into and turn the ignition ey to M To pair iei dus again select DELETE USERS and then re pair the phone gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK gt SETTING FUNCTIONS PAIRING YOUR MOBILE PHONE _ When calling contacts by voice pronounce the contact s name without using prefixes suffixes or middle names initials If you have two entries with similar first and or last name in your phonebook modify one of the entries in the mobile phone to make it unique Then re download the phonebook to the hands free phone system 83 BLUE amp ME nav BLUE amp ME nav 84 Problem Probable Cause Possible Solution Phone numbers containing international On certain mobile phones when Replace with 00 dialling codes e g 39 Italy 44 UK downloading names and phone numbers e g 39 becomes 0039 33 France etc are difficult to call to the hands free system the sign is omitted To consult the list of mobile phones and functions supported consult the dedicated website www alfaromeo com Blue amp Me Nav Customer Services on 00800 2532 0000 You w
113. s and or their designated agent UPGRADES AND RECOVERY MEDIA If the SOFTWARE is provided by Fiat Auto S p A separate from the DEVICE on media such as a ROM chip CD ROM disk s or via web download or other means and is labeled For Upgrade Purposes Only you may install one 1 copy of such SOFTWARE onto the DE VICE as a replacement copy for the existing SOFTWARE and use it in accordance with this EULA induding any additional EULA terms accompanying the upgrade SOFTWARE INTELLECTUAL PROPERTY RIGHTS All title and intellectual property rights in and to the SOFTWARE including but not limited to any images photographs animations video audio music text and applets incorporated into the SOFTWARE the accompanying printed materials and any copies of the SOFTWARE are owned by Fiat Auto S p A s Software Suppliers their affiliates or suppliers The SOFTWARE is licensed not sold You may not copy the printed materials accompanying the SOFTWARE All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties This EULA grants you no rights to use such content All rights not specifically granted under this EULA are reserved by Fiat Auto S p A s Software Suppliers their affiliates and suppliers Use of any on line services which may be accessed
114. s and or their designated agent may use this information solely to improve their products or to provide customized services or technologies to you Fiat Auto S p A s Software Suppliers their affiliates and or their designated agent may disclose this information to others but not in a form that personally identifies you Internet Based Services Components The SOFTWARE may contain components that enable and facilitate the use of certain Internet based services You acknowledge and agree that Fiat Auto S p A s Software Suppliers their affiliates and or their designat ed agent may automatically check the version of the SOFTWARE and or its components that you are utilizing and may provide upgrades or supplements to the SOFTWARE that may be automatically downloaded to your DEVICE Additional Software Services The SOFTWARE may permit Fiat Auto S p A Fiat Auto S p A s Software Suppliers their affili ates and or their designated agent to provide or make available to you SOFTWARE updates supplements add on components or In ternet based services components of the SOFTWARE after the date you obtain your initial copy of the SOFTWARE Supplemental Components If Fiat Auto S p A provides or makes available to you Supplemental Components and no other EULA terms are provided along with the Supplemental Components then the terms of this EULA shall apply BLUE amp ME 97 nav nav BLUE amp ME 98 f Fiat Auto S
115. s not support audio files compressed with other formats e g aac and DRM Digital Right Management protected audio files or ACC files down loaded from iTunes and MP4 Non support ed audio files that may be present on the USB device will be ignored To use the media player you have to sim ply connect directly or by an extension lead your USB device to the car USB port Turn ing the ignition key to MAR Blue amp Me Nav will start building your media library At the end of this operation you can surf the whole library and browse through its cate gories as required using the buttons on the steering wheel or voice commands Blue amp Me Nav will then play your se lection via the car sound system THE NAVIGATION SYSTEM The Blue amp Me Nav navigation system allows you to reach a required location quickly and safely You will be taken to your destination by means of voice messages and pictogram instructions shown on a the ve hicle s display The navigation system allows you to J Enter a new destination you can enter the address of a desired destina tion specifying the name of the desti nation street with the house number or simply the town city centre O Navigate to a point of interest you can call up as a final destination a point of interest selected from a catego ry list e g hotels restaurants airports railway stations authorised workshops etc O Trip information Blue amp Me Nav
116. s to be carried in plenty of time in particular advance warning of the manoeuvre to be carried out is given followed by detailed instructions on when to carry out the manoeuvre To repeat the last voice message press the key and say Next maneuver START NAVIGATION Proceed as follows to begin using the Blue amp Me Nav navigation function O Connect your USB device with preloaded maps to the USB port on the vehicle Turn the ignition key to MAR To activate the NAVIGATION menu in manual mode proceed as follows 9 O Press the NAV key near the front cour tesy light where provided see fig 1 CJ Or with the Main Menu on press v se lect the Navigation option and press OK or Blue amp Me Nav will show the following warning message on the display THE DRI VER MUST RESPECT THE ROAD RULES Press OK to confirm Now you can access the submenus dedicat ed to the Blue amp Me Nav navigation functions O NEW DESTINATION O RESUME NAVIGATION O ARRIVAL INFORMATION O STOP NAVIGATION O RECENT DESTINATIONS O NAVIGATION SETTINGS O VEHICLE POSITION O ROUTE SIMULATION Scroll to the required function using the A or W keys and press OK or v to confirm Or with voice X interaction e Press and say Navigation Blue amp Me Nav will show the fol lowing warning message on the dis play THE DRIVER MUST RE SPECT THE ROAD RULES Press OK to confirm no specific voice
117. sc It has been enabled for use as a disc but there are tracks inside in AAC Mp4 format these formats are not supported by Blue amp Me Nav J There are tracks on the iPod purchased from the iTunes site the system does not support protected tracks such as those in DRM format that can be purchased from the iTunes store site It is a Touch Possible Solution Use an alternative USB memory stick or reset the iPod for Windows O Enable usage as a disc this function cannot be selected with iPod touch and iPhones CJ Modify the track format to one that is compatible with Blue amp Me Nav 91 BLUE amp ME nav BLUE amp ME Nav Problem With iPods or USB memory sticks the system continues playing the same track or the forward button has to be pressed to move on to the next track The iPod connected to the Blue amp Me Nav is not charged Probable Cause The repetition function for each individual track may have inadvertently been activated L When the ignition is MAR the vehicle recharges the iPod unless the iPod is completely run down Possible Solution There is a specific item in the menu like continuous play or individual track repetition which must be deactivated Proceed with the deactivation press the controls activation button on the steering wheel when requested by the system say DEACTIVATE CONTINUOU
118. system will ask you if you wish to start navigating toward the chosen point of interest or make a phone call Say Start to start navi gating or Call to make the phone call After making the selection Blue amp Me Nav will display the name distance and address of the point of interest and ask for confirmation in order to begin navigating DriveMe By means of this function Blue amp Me Nav allows you to speak with an operator and receive the desired destination by means of an SMS without having to digit it Note This service may not be available when you purchase the vehicle to know if it is available and information on how to enable it call col lect Alfa InfoMore 0080025320000 or see relevant info at www alfaromeo com To request a new destination by means of the DriveMe service follow the instruc tions below CJ Push and wait to be connected to the operator O Ask the destination wanted providing the address directly or requesting info con cerning the localization of the arrival points desired i e hotels restaurants chemists airports etc O After a few seconds Blue amp Me Nav will automatically receive an SMS from DriveMe with the address wanted and will show it on the multifunctional display reconfigurable of the on board panel Push OK or v to proceed The you can start navigating towards the ad dress received 9 Shift A or V on the Dri veMe menu and se
119. t in mind loosing it will not impair the hands free phone system operation The pairing procedure will only need to be performed once for your mobile phone Af ter this procedure Blue amp Me Nav will automatically connect to your phone each time you get into the car and turn the igni tion key to MAR 51 BLUE amp ME nav BLUE amp ME Nav 52 You can create a pairing relationship using the USER PAIRING option in the SET TINGS menu To create a pairing relationship using amp manual interaction proceed as fol lows Press v open the Main Menu then select SETTINGS by pressing OK or Select USER PAIRING and then press OK or v The system will start the pairing procedure The system shows the mobile phone pairing PIN on the instrument panel display and repeats it Please note that this is a PIN used just for this op eration it is not your SIM PIN For the next two steps consult your mobile phone owner s manual about Bluetooth pairing On your mobile phone query for de vices equipped with Bluetooth wireless technology that are within range this option on your mobile phone might be called Discover New Device etc View the list of Blue tooth wireless technology enabled devices and select Blue amp Me item that identifies Blue amp Me Nav on your car When prompted by the mobile phone enter the PIN number shown on the instrument panel display If pairing is successful
120. t list of categories to access the ad ditional ones on the USB Now Blue amp Me Nav will prompt you to choose between LOCAL POINTS of in terest or ELSEWHERE If you select LOCAL POINTS of inter est by pressing OK or Blue amp Me Nav will display a list of points of inter est belonging to the category selected previously e g restaurants sorted ac cording to distance from your current lo cation including distance and name Scroll through the list using the A or W keys and press OK or v to select the point of interest CJ If you select points of interest ELSE WHERE Blue amp Me Nav will ask you to specify the point of interest coun try and town city in the same way as when entering an address amp Nav will display a list of points of inter est in the chosen category in alphabeti cal order Scroll through the list using the A or Y keys and press OK or v to select the point of interest required If the point of interest selected using the pre vious options has a telephone number and your Bluetooth mobile phone is con nected to Blue amp Me Nav the system will allow you to decide whether to start nav igating toward the chosen point of interest or make a phone call Select the required option by pressing OK or v Or use voice interaction by pressing A and saying Navigation Once the system message has finished say New destination and then Points
121. t navigation the sys tem will display the full address and ask you to confirm in order to begin navigation If the address entered is ambiguous the sys tem will prompt you to choose between the possible alternatives If you choose Enter number you must enter the house number of the chosen des tination address Proceed as follows to enter the house number Scroll through the numbers in the fourth row see fig 4 using the A or Y keys until the required numbers are displayed on the third row Press OK or v to select the number Proceed in the same way to select the following numbers until the full house number is displayed in the second row Press the key to delete the last num ber entered The system will ask you to con firm the deletion by pressing OK or v If you are using voice interaction press and say Delete Press the W key once to finish entering the house number displayed The system will ask you to confirm by pressing OK or If you are using voice interaction press and say OK Once you have entered the house number Blue amp Me Nav will display the full ad dress and ask for confirmation in order to be gin navigation If the address entered is am biguous the system will prompt you to choose between the possible alternatives While entering the house number both num bers and letters are shown on the fourth row see fig 4 of the reconfigurable mul
122. ternatively you can dial a phone pad and then continue your conver sation using the hands free phone sys tem It is a requirement that you create a pairing relationship and that the mo bile phone is within range of the hands free phone system of your car To dial a phone number using your mobile phone keypad proceed as fol lows O Dial the phone number on your mobile phone keypad and connect the phone call following the pro cedure required by your mobile phone O Conduct the conversation using the hands free phone system O To end the phone call press v for longer than 1 second or end the phone call from your mobile phone keypad 23 BLUE amp ME nav BLUE amp ME Nav 24 Calling a phone number using call history last calls LAST CALLS option is a list of the recent calls made or received It can consist of up to ten incoming calls up to ten outgoing calls and up to five missed calls To dial a phone number using man ual interaction proceed as follows Press v to open the Main Menu Select LAST CALLS and then press OK or v O The system will present a list of phone numbers Use A or V to select the required phone number Then press OK or v to start the call O To end the phone call press v for longer than 1 second M Or using voice interaction 3 To call back last incoming phone number press ag and pronounce Callback The system w
123. ters the text in the dis play message will be cut to fit the display size To select the option shown on the display press OK or v To quit the selected option or to exit a sub menu press ESC NOTE It is possible to navigate in the menu using the steering wheel buttons only when the car is not moving The Main Menu includes the following op tions HANDS FREE KIT FUNCTIONS Blue amp Me Nav lets you make and re ceive phone calls on your Bluetooth wire less technology enabled mobile phone using voice commands keywords or steering wheel buttons By using voice commands you can make calls to people in your phonebook by pro nouncing their first and or last name or you can make phone calls to numbers not stored in your phonebook by pronouncing the dig its of the phone number or call the last mes sage sender By using steering wheel buttons you can make phone calls to people in your phone book or call history list by selecting the as sociated item in the LAST CALLS or PHONEBOOK submenus In addition you can use other calling fea tures such as responding to incoming calls redial callback call waiting read a message or delete it gt If you encounter difficulties with any of the voice recognition operations consult sec tion HANDS FREE KIT TROUBLESHOOTING NOTES Before you can make and receive phone calls using the hands free kit you must create a pairing relationship for your mo
124. the Blue amp Me Nav on the re configurable multifunction display Select the required destination using the A or V keys and press OK or v to confirm The display will show the required des tination You may choose between the START NAVIGATION and CANCEL DESTINATION com mands Select the required option using the A or VW keys and press OK or v to confirm If you wish to delete all the stored des tinations scroll through the list to dis play the DELETE ALL option Press OK or v to confirm 45 BLUE amp ME nav BLUE amp ME Nav 46 gt Or with voice interaction press AS and say Navigation Then once the system message has finished say Recent destinations Blue amp Me Nav will show a list of the latest destinations entered on the multifunctional display Select the required destination by say ing Forward or Back Say Start to start navigation or Delete to delete the displayed destination If you wish to delete all the stored des tinations say Delete all and con firm the operation when prompted by the system In order to start navigating towards the last destination selected the USB device containing the maps must be inserted in the USB port on the vehicle If the destination selected has been re ceived by means of the DriveMe ser vice if a phone number is combined to it and if your Bluetooth mobile phone
125. through the SOFTWARE may be governed by the respective terms of use relating to such services If this SOFT WARE contains documentation that is provided only in electronic form you may print one copy of such electronic documentation EXPORT RESTRICTIONS You acknowledge that the SOFTWARE is subject to U S and European Union export jurisdiction You agree to comply with all applicable international and national laws that apply to the SOFTWARE including the U S Export Administration Regulations as well as end user end use and destination restrictions issued by U S and other governments TRADEMARKS This EULA does not grant you any rights in connection with any trademarks or service marks of Fiat Auto S p A Fi at Auto S p A s Software Suppliers their affiliates or suppliers PRODUCT SUPPORT Product support for the SOFTWARE is not provided by Fiat Auto S p A s Software Suppliers or their affili ates or subsidiaries For product support please refer to Fiat Auto S p A support number provided in the documentation for the DE VICE Should you have any questions concerning this EULA or if you desire to contact Fiat Auto S p A for any other reason please re fer to the address provided in the documentation for the DEVICE No Liability for Certain Damages EXCEPT AS PROHIBITED BY LAW FIAT AUTO S p A S SOFTWARE SUPPLIERS AND THEIR AF FILIATES SHALL HAVE NO LIABILITY FOR ANY INDIRECT SPECIAL CONSEQUENTIAL OR INCIDENTAL DAMAG
126. tionship between your mobile phone and Blue amp Me Nav you should make sure that you have contact entries in your mobile phone phonebook so that you can use them with the hands free phone gt If your phonebook is empty quickly cre ate several new entries for frequently dialled phone numbers For further details consult your mobile phone owner s manual gt To enter properly contacts in your mobile phone phonebook refer to section SETTING FUNCTIONS PAIRING YOUR MOBILE PHONE IMPORTANT NOTES CJ The phonebook copied to Blue amp Me Nav can only be used when the corre sponding mobile phone is paired Entries stored in SIM card or mobile phone memory can be transferred to Blue amp Me Nav with different pro cedures according to your mobile phone model TRY OUT THE VOICE COMMANDS At each stage of your dialogue with the sys tem you can always use the voice com mand Help to get detailed indications about the voice commands available at the current dialogue stage To try out the Help function proceed as follows Press the steering wheel button aw O After Blue amp Me Nav plays a tone in dicating that voice recognition is active pronounce Help Blue amp Me Nav will speak the list of voice commands available O After the general help message is finished pronounce Settings and then Help Blue amp Me Nav will speak again the list of voice commands available f
127. trade marks are proprietary of the respective Companies VOICE COMMANDS KEYWORDS SUMMARY All the voice commands available with the Blue amp Me Nav system are shown on the following pages The main command is shown in each case followed by the possible synonyms ALWAYS AVAILABLE VOICE COMMANDS Hel e Men Activates the Help Menu function that gives a list of voice commands available for the current context Cancel Cancels voice interactions and deactivates the voice recognition system Repeat Repeats the last spoken utterance Hine 67 BLUE amp ME Nav Nav BLUE amp ME 68 HANDS FREE PHONE KIT VOICE COMMANDS ial ial a number Activates the voice recognition of a phone number m One c Iwo gt e Three Four gt Five Six Seven gt e Eight _ Nine Zero 0 m Plus Star Dials the digit 1 Dials the digit 2 Dials the digit 3 Dials the digit 4 Dials the digit 5 Dials the digit 6 Dials the digit 7 Dials the digit 8 Dials the digit 9 Dials the digit 0 PN Equivalent to pressing nyn Equivalent to pressing Pound Delete Start over Repeat Call Dial Equivalent to pressing Deletes the last group of numbers Deletes the phone number that you pronounced and you
128. ume of phone calls to a level that is comfortable and safe while the car is in motion To adjust the default volume of Blue amp Me Nav see paragraph EXTERNAL AUDIO VOL function in the sound system owner handbook To tem porarily adjust the volume of the current phone call press VOL or VOL or ad just the position of the radio knob After the phone call is disconnected the volume will revert back to the original level You can press VOL or VOL also to ad just the volume of the current Blue amp Me Nav voice announcement Please remember that to interrupt a voice announcement you can always press 8 at any time during a voice interaction and give new voice command NOTES Instructions concerning voice commands are identified in the text by symbol 09 O After you press aw if you do not issue a voice command within a few seconds the system will prompt you to pronounce a voice command If you do not respond then voice recognition shuts off It is the same case with not responding to a ques tion during a voice interaction You will hear a tone indicating when voice recog nition is deactivated When the system fails to recognize your voice command it will give you another opportunity to re pronounce the voice command If you are unsure of whether the voice command is appropriate for the given context pronounce Help BLUE amp ME 17 nav BLUE amp ME Nav Using voice recognition
129. ver Maneuver Next Next maneuver Repeat the last voice message during navigation Recent destinations Call up one a recent destination set Call the phone number combined to the destination displayed Type of route Type of route Navigation settings Set type of route Route Set the type of route et motorways otorways Include or exclude motorways from the route calculation Use to set preferences for The type of route Vehicle position Provides an indication of latitude longitude and number of GPS satellites visible Set ferries Ferries Boats Route simulation Simulation Include or exclude ferries from the route calculation Set tolls Tolls Set toll e Toll Simulates the set route Include or exclude toll roads from the route calculation e PDI ALERT Points of interest alert P e Points of interest alert POI alerts Dictate destination Dictate Dictate destination Enable or disable completion of the destination by voice Start Navigate Start navigating towards The destination selected e Start Navigate Start navigating towards the displayed destination Forward Next Display the next destination in the list Back Previous Display the previous destination in the list Delete the displayed destination Delete all Delete all the destinations
130. y To add contacts to the phonebook go to the SETTINGS menu and select USER DATA To dial a phone number say DIAL Probable Cause I4 For pull phones You answered Yes to The data from the phonebook will now be copied onto the system Continue but the downloaded phonebook does not indude any valid contacts You have used the option COPY PHONEBOOK in the SETTINGS menu but the mobile phone phonebook does not include any valid contacts For push phones When the system asked The data from the phonebook will now be copied onto the system Continue you answered Yes but did not send any valid contacts during the ADD CONTACTS procedure J You used the ADD CONTACTS option but did not send any valid contacts to the system Possible Solution For pull phones J Enter valid contact information name and one phone number at least in the phonebook on your mobile phone then download the phonebook again gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK For push phones G Download the phonebook again and make sure to send valid contacts to the system using your mobile phone when prompted J Use the option ADD CONTACTS in the SETTINGS menu to send contacts from your mobile phone to the system gt SETTING FUNCTIONS MANAGING USER DATA AND PHONEBOOK Problem Display screen shows NO PHONE CONNECTED Or the system says There s no

Blue&Me™ Nav

Contents

Download Pdf Manuals

Related Search

Related Contents

Blue&amp;Me&trade; Nav

Contents

Download Pdf Manuals

Related Search

Related Contents

Blue&Me™ Nav