UDC5300, 07866D and CTX 256 KB PCMCIA Card
Contents
1. Honeywell Document Number Kit Contents Summary ATTENTION UDC5300 07866D and CTX 256 KB PCMCIA Card 51197859 501 Unconfigured 51197859 502 Custom Configured Form 51 52 33 29A Effective 2 00 Supersedes 8 98 Kit contains one 256 KB PCMCIA card This document accompanies a PCMCIA card It is not necessary to remove power before using the button below the front panel to release the bezel latch nor before lifting the bezel out of the way on its bail linkages to access the PCMCIA card used to store data However disconnect power before using a tool to open the latches on the plate uncovered when the bezel is lifted out of the way Opening these latches provides access to the instrument assembly which slides out of the case A potentially lethal shock hazard exists if the instrument assembly is accessed while powered More than one switch may be required to disconnect power To install and remove the PCMCIA card refer to Table 1 on the following page For information on storing and loading configuration and calibration with the card refer to the User Manual provided with the controller Installing a PCMCIA Card ATTENTION Before inserting or removing a card be sure to discharge any static buildup on your body or clothing Table 1 shows the procedure for installing and removing memory cards 51 52 33 29A Table 1 Memory Card Installation and Removal Procedure S2. tance personally through our literature and the Honeywell web site it is up to the customer to determine the suitability of the product in the application Honeywell Sensing and Control Honeywell 11 West Spring Street Freeport IL 61032 51 52 33 29A 0200 Printed in USA www honeywell com sensing
3. tep Action 1 Press the button on the underside of the bezel to release the latch The latch will release easily if you press the bottom of the bezel back towards the panel to compress its gasket as you press the button 2 Pull the bottom of the bezel outwards slightly away from the panel and then lift it gently up to fully open it as shown below 3 Insert the card into the slot until it catches in place 4 To remove the card press the rectangular button next to the slot 5 To close the bezel lower it until it is almost closed Engage the top edge of the bezel first and then swing the bottom inward Press the bottom in firmly until the latch clicks into place Be careful to fully close the bezel or the unit will not function normally Warranty Honeywell warrants goods of its manufacture as being free of defective materials Remedy and faulty workmanship Contact your local sales office for warranty information If warranted goods are returned to Honeywell during the period of coverage Honeywell will repair or replace without charge those items it finds defective The foregoing is Buyer s sole remedy and is in lieu of all other warranties expressed or implied including those of merchantability and fitness for a particular purpose Specifications may change without notice The information we supply is believed to be accurate and reliable as of this printing However we assume no responsibility for its use While we provide application assis
Download Pdf Manuals
Related Search