Home
rg-p001 user manual
Contents
1. 19 Fixed Soft Spotlight RG P001 USER MANUAL Please read this instructions carefully before use Rige lighting amp Audio Equipment co Ltd Please read these instruction carefully before use Strictly observes its instruction to avoid danger caused by wrong operation 19 Fixed Soft Spotlight are suit for theatre reporting hall performance prop etc The correct operating ensures the best effect Schematic illustration Adjusting Knob Knob Block Slipper lamp replacing knob screw Lamp replacing knob screw stopper lamp adjusting knob Snap rings for reinforce the lamp operate intruduction 1 Check the product before use make sure there is no damagement or screw lost during shipment Turn off the power supply then open the back cover Do not touch partial glass of the lamp directly while inserting 220V HPL 750W 575W is available for this lighting Please dim the brightness slowly to avoid lamp damagement Install the lighting in an air circulate environment under 45 C The temperature is about 200 C at the back of lighting do not touch it directly the distance must be more than 1 meter Please pay attention to moistureproof protection It s normal that backing paint of the lighting produce a little smog or burnt smell at the first using Reinforce the protection net in using Using the equipment the power supply must be connected to the earth line to ensure the safety 10 When the li
2. ghting is open please do not fierce vibrate it Lighting adjustment 1 When the lighting is open use the adjusting knob and the slipper to got the perfect beam effect open the knob block to make adjustment by using adjusting knob or the slipper 2 To adjust the lamp s position in the reflector trun the Forward Backword Adjusting Knob Turn it clockwise the socket moves forward turn it anticlockwise the socket moves backward Unlock the ring in the desired direction 3 NOTE a do not turn it strenuously when the adjusting knob couldn t turn around b do not turn it strenuously when the lamp adjusting knob couldn t turn around c use the adjusting knob and the lamp adjusting knob to get the best beam effect JU Inserting replacing the lamp 1 Turn off the power supply make sure the lamp have been cool before replacing open the two knob screw then pull out the back cover 2 Open the snap rings put out the damaged lamp then insert the new one Make sure the lamp is inserted complete reinforce lamp and block the snap rings 3 Adjust the back cover to the best position then reinforce two knob screw 4 Turn the Forward Backward Adjusting knob to get best beam effect 5 Warning a please replace it while the reflector or the lens have been damaged or they are even lose the funtion b please replace the lamp while the lamp have been damaged
Download Pdf Manuals
Related Search
Related Contents
RATAmation v2.0 User Manual Evaluation Kit User`s Manual 取付・取扱説明書 Brixton TA-0797 freestanding table Hoover SteamVac Bagless Vacuum Cleaner User's Manual PDFダウンロード manual - Black Widow Vehicle Security Systems 平成25年度のパンフレット Zlinx 485 Industrial I/O - Manual Copyright © All rights reserved.
Failed to retrieve file