GEN10 User Manual
Contents
1. to operate this equipment Limited Warranty To contact AJA Video for sales or support use any of the following methods 443 Crown Point Circle Grass Valley CA 95945 USA Telephone 1 800 251 4224 or 1 530 274 2048 Fax 1 530 274 9442 Web http www aja com Support Email support aja com Sales Email sales aja com When calling for support have all information on the product serial number etc at hand prior to calling AJA Video warrants that this product will be free from defects in materials and workmanship for a period of five years from the date of purchase If a product proves to be defective during this warranty period AJA Video at its option will either repair the defective product without charge for parts and labor or will provide a replacement in exchange for the defective product In order to obtain service under this warranty you the Customer must notify AJA Video of the defect before the expiration of the warranty period and make suitable arrangements for the performance of service The Customer shall be responsible for packaging and shipping the defective product to a designated service center nominated by AJA Video with shipping charges prepaid AJA Video shall pay for the return of the product to the Customer if the shipment is to a location within the country in which the AJA Video service center is located Customer shall be responsible for paying all shipping charges insurance duties taxes and any o2. 1 Output Group o 7 0 Output 3 Output 6 a PP 1st Output Group Output 4 AES 11 Output 5 to 18VDC ad Either Output Group can be set to SD or HD Configuration is Determined by DIP switch on Power LED When Green this LED indicates RE of the GEN10 is powered up GEN10 Side View User Controls The user interface for the GENIO is an pip switch Setting 8 switch DIP accessible through acut LEFT RIGHT out in the bottom of the unit Use the DIP switches to configure outputs and formats OUT 1 4 HD OUT 5 6 HD SD OUT BARS FORMAT 50 HD FMT 720 SI 2 3 MODEL GEN10 Note The combination of switch settings determines the overall operation of the GEN10 The exact purpose of each DIP switch and what it controls is described on the following pages alolalalalajujo AJA Tel 530 274 2048 www aja com AJA GEN10 HD SD Sync Generator User Manual User Controls os Switch 1 OUT 1 4 Switches outputs 1 4 between SD and HD sync Selects SD Sync Selects HD Sync Switch 2 OUT 5 6 Switches outputs 5 6 between SD and HD sync LEFT SD RIGHT HD Switch 3 SD OUT Switches SD output between Color Black and Color Bars Also switches AES output between BLK Silence and BARS TONE LEFT BLACK RIGHT BARS SD Output is Color Black SD Output is 75 Color Bars AES 11 output is silent AES 11 output with tone Switch 4 FORMAT Switches outputs b
3. 2 S1 0 0 1080i59 94 720p59 94 1080i50 720p50 1080psf23 98 720p23 98 1080i50 720p25 0 1 0 0 1080p23 98 720p23 98 1080p25 720p25 0 1 1080p29 97 720p29 97 1080p25 720p25 1080160 720p60 1080i50 720p50 1080psf24 720p24 1080150 720p25 1080p24 720p24 1080p25 720p25 1080p30 720p30 1080p25 720p25 Note for 1080psf29 97 use 1080i59 94 for 1080psf30 use 1080i60 for 1080psf25 use 1080i50 Internal Jumper An internal jumper block with 3 jumpers determines the offset to Pedestal for NTSC For most instances the factory default all jumpers in place will be the proper setting e Jumper 1 installed default NTSC with Setup 54 mV pedestal offset e Jumper 1 removed NTSC without Setup no offset Note Jumpers 2 and 3 are ignored installed or not they do not affect operation e el e el or le e Defaults Shown Here 1 ON 2 ON 3 ON ONAUARWN DIP Switches e el ojo Back of GEN10 where DIP switch access can be seen To keep an uninstalled jumper for future use you can place it over only a single pin GEN10 Internal Jumper remove back of case to access AJA GEN10 HD SD Sync Generator User Manual Specifications Specifications SD Sync Color Black 75 Color Bars AES 11 Output AES 11 48KHz Silent or 1KHz Tone 20dBFS for NTSC 18dBFS for PAL 1 BNC Video Sync Outputs Assignable in two groups to either HD or SD 4 BNCs Outputs 1 to 4 2 BNCs Outputs 5
4. GEN10 HD SD Sync Generator User Manual AJA VIDEO SYSTEMS May 19 2008 AJ Ela Ce marke A A VIDEO SYSTEMS AJA KONA and XENA are registered trademarks of AJA Video Inc lo HD and Io are trademarks of AJA Video Inc All other trademarks are the property of their respective holders Copyright 2008 AJA Video Inc All rights reserved All information in this manual is subject to change without notice No part of the document may be reproduced or transmitted in any form or by any means electronic or mechanical including photocopying or recording without the express written permission of AJA Inc FCC Emission Information This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Changes or modifications not expressly approved by AJA Video can effect emission compliance and could void the user s authority
5. and 6 Formats 5251 6251 720p23 98 24 25 29 97 30 50 59 94 60 1080i50 59 94 60 1080psF23 98 24 25 29 97 30 1080p23 98 24 25 29 97 30 User Controls External Dipswitch 5 18VDC 2 watts Requires power supply m AJA VIDEO SYSTEMS
6. etween 59 94 60Hz and 50Hz LEFT 59 94 RIGHT 50 Select NTSC related frame Select PAL related frame rates rates for true 60 24Hz see chart that follows Switch 5 HD FMT Switches HD between 720 and 1080 formats LEFT 1080 RIGHT 720 Switches 6 S1 7 S2 and 8 S3 Used for selecting less popular HD Formats For the most popular HD formats switches 6 7 and 8 should be set to the default position all three switches set to LEFT or 000 as listed in the chart that follows Switches 6 7 and 8 should only be changed to select other HD formats that are more rarely used The following chart in Table 1 shows how to select those formats using switches 4 through 8 in combination AJA VIDEO SYSTEMS Table 1 Selection Matrix For Switches 6 7 and 8 The following table shows the combinations of DIP switch settings required to configure various formats To use the table first locate the video format you want in the colored columns and then set switches as shown in the corresponding left hand gray column Note the switches numbers and labels are both shown on the chart with the labels in parentheses for example switch 4 is labelled FORMAT and switch 8 is labelled S3 SW 4 FORMAT 59 94 SW 5 HD FMT 1080 A SW8 S3 SW7 S2 SW6 S1 These three switches form a binary value shown in the left hand column below A 0 switch LEFT a 1 switch RIGHT SW8 SW7 SW6 S3 S
7. puts including 2 groups of independently controlled SD HD sync outputs and 1 AES 11 output The SD outputs can be switched between Color Black or Color Bars HD tri level sync can be switched between 19 different HD formats including all that are in use today The AES 11 output can be switched between SILENCE and TONE All outputs are in sync with each other and are sourced from an accurate master time base e HD Tri level sync generation e SD Color Black or Color Bars e Two groups of independently switchable outputs allows simultaneous HD and SD sync generation e AES 11 output switchable between silence and tone e Multiple outputs can synchronize entire systems without requiring a Sync DA e 5 18VDC Power e External Dip Switch Configuration Generator HD PAL or NTSC Group 1 1 Selectable as a group for DS Output HD Trilevel l 720 or 1080 P Output 2 l multiple formats see specifications SD or Sync swt o Output 3 SD 75 Color Bars or Blackburst l l e Output4 HD Sync Generator Group 2 o Output5 1 Selectable as a group for HD Trilevel O Sw2 l 720 or 1080 tput HD ENON poa multiple formats see specifications or SD 75 Color Bars or Blackburst PAL or NTSC Master Timebase AES Generator po vs Output GEN10 Block Diagram E AJA VIDEO SYSTEMS I O Connections Output 1 Mi Output 2 vit ond Output 5 m
8. ther charges for products returned to any other locations This warranty shall not apply to any defect failure or damage caused by improper use or improper or inadequate maintenance and care AJA Video shall not be obligated to furnish service under this warranty a to repair damage resulting from attempts by personnel other than AJA Video representatives to install repair or service the product b to repair damage resulting from improper use or connection to incompatible equipment c to repair any damage or malfunction caused by the use of non AJA Video parts or supplies or d to service a product that has been modified or integrated with other products when the effect of such a modification or integration increases the time or difficulty of servicing the product THIS WARRANTY IS GIVEN BY AJA VIDEO IN LIEU OF ANY OTHER WARRANTIES EXPRESS OR IMPLIED AJA VIDEO AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AJA VIDEO S RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS ISTHE WHOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR ANY INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER AJA VIDEO OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES Introduction Features Block Diagram AJA GEN10 HD SD Sync Generator User Manual Introduction The GEN10 is a cost effective and flexible SD HD AES sync generator The GEN10 features 7 out
Download Pdf Manuals
Related Search