DP-500 (500x0.1g) - User Manual
Contents
1. FLS american Weigh Scales Inc Ne ETNSODO Digital Hanging Scale User Manual DigiPen 500 Manual Thank you for purchasing the American Weigh DigiPen 500 digital hanging scale Please read all operating instructions carefully before use This electronic scale is a precision instrument With normal care and proper treatment it will provide years of reliable service Never load the scale with more than the maximum capacity Overloading will permanently damage it Avoid any exposure to extreme heat or cold Your scale works better when operated at normal room temperature Always allow the scale to acclimate to normal room temperature for at least one hour before use Give your scale sufficient warm up time Usually 30 60 seconds before calibration to give the internal components a chance to stabilize Keep your scale in a clean environment Dust dirt moisture vibration air currents and a close distance to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale Handle with care Gently apply all items to be weighed onto the hook Although this scale is designed to be quite durable try to avoid rough treatment as this may permanently damage the internal sensor Avoid shaking dropping or otherwise shocking the scale This is a precision instrument and must be handled with extreme care Only operate the scale on a stable vibration free surface I OPERATION It is recommend2. ecise instrument and must be handled with the utmost care and caution Display Solution Nothing uam Change the batteries EEEEE You are overloading the scale Remove the excessive load immediately Oue2 The delicate weighing load cell has been damaged by misusing the scale i e it was shocked dropped or overloaded You can try recalibrating the scale If the load cell has not been damaged too much it will work again after recalibration Specifications Model Capacity DigiPen 500 500g 17 640z 16 080zt 321 5dwt 0 1g 0 0050z 0 0050zt 0 1dwt Calibration Weight Included Scale Dimensions inches Power 500g 1 0x1 2x6 2 2 x AG8 Button Cell Batteries included
3. ed to hang the scale from a stable support for best results 1 Press ON OFF TARE key 2 Wait until 0 0 is displayed 3 Hang the item on the hook or attach it to the clip 4 Using the MODE key you can switch between weighing units 5 To turn the scale off press and hold the ON OFF TARE key Il TARE WEIGHING 1 Turn on scale as described above 2 Place the tare item on the hook such as another hook accessory or empty bag 3 Press ON OFF TARE key briefly and wait until 0 0 is displayed 4 Add the net weight item Ill CALIBRATION Calibration is NOT required before first use Only calibrate if scale is not weighing properly This scale calibrates with 500g 1 With the scale off press the ON OFF TARE key once to turn the scale on then quickly press the ON OFF TARE key four more times and hold it A random number will display you can now release the ON OFF TARE key 2 Press the ON OFF TARE key one more time The scale will display Zero followed by 500g 3 Gently hang the included 500g calibration hook weight on the scales hook Now press the ON OFF TARE key one last time 4 The scale will show PASS Calibration is complete IV TROUBLESHOOTING The primary reasons for inaccuracy or malfunction are low batteries incorrect calibration overload or operating under unstable conditions Please keep this in mind and maintain and operate your scale properly This scale is a pr
Download Pdf Manuals
Related Search