Tube Warmer TW37 User Manual
Contents
1. Tube Warmer TW37 is designed to warm up and maintain test tubes at a constant temperature 6 2 General description The unit is able to hold up to 14 test tubes type 14 ml or 15 ml round bottom tubes 7 on each side Sterile test tubes are placed in one of the 14 slots on the unit to maintain a constant temperature or to warm up with the unit The 4 character green LED display will indicate the current temperature of the Tube Warmer TW37 Adjustments to the temperature can be made using the up and down arrow keys origio origio Note The sides of the Tube Warmer TW37 can be removed for sterilising and general cleaning 6 3 Construction of the Tube Warmer TW37 The unit is constructed of an anodised Aluminium casing containing the internal control power input and heating system for the tubes A removable polycarbonate front on either side of the unit ensures that the tube remain in place whilst in use The unit must be connected to mains power for normal operation mode The casing design is also made to retain and maintain the heat to an even level and avoid high fluctuations in temperature Two polycarbonate front panels are magnetically fixed to the front for visual indication of filled tubes and removable for ease of cleaning 6 4 Placing instruments Place the Tube Warmer TW37 on a flat surface away from heat and direct sunlight 6 5 Power supply Put the power supply in con2. Height 119 mm Width 52 mm Length 174 mm Tube Warmer TW37 Weight 1 5 kg Power Supply cable length to Tube Warmer TW37 1600 mm approximate Power Supply cable length to External 1900 mm approximate 11 2 Power Supply The unit is supplied with a Switch mode regulated power supply DC output 7 output selections 15 16 V DC 8 5 A 18 19 V DC 8 A 20V DC7 5A 22V DC 65 A 24V DC6A
3. Tube Warmer TW37 User Manual willl Orgio origio Table of Contents 1 General information lle 3 2 Product overview 2 2 2222er 4 3 Unpacking the Tube Warmer TW37 5 4 Attention css RR su 6648 oe Sno 42d ERG 5 5 Accessories fae un ene Ru OX M bw Ge SR d 6 5 1 Standard accessories 4 hae oen o o Rs 6 5 2 Optional equipment zu as oe 6 eee aw EON 6 6 User Manual 2 2544444 8484544425004 7 6 1 Definition of use ee 7 6 2 General description sos o o9 eR RS 7 6 3 Construction of the Tube Warmer TW37 8 6 4 Placing instruments 2 2 Coon 8 6 5 Power supply 2444 62444 4 eee a 8 CO Stat Upas Sun a sd ORR DRS a SOS TS 9 7 User maintenance ln 10 7A Cleaning e eca a a e des 10 7 2 Technical support and guarantee 10 8 Changing the Set point 11 9 Calibration d ooe casa Bowen awh ore aa Ee we 11 9 1 Temperature calibration 12 9 2 Re Enter Password protection 2 222 2222 13 9 3 Auto Tune procedure 2 2 2 2 Emo 13 10 Standard settings Value Parameters 14 11 Technical data 222222 15 11 1 DIMENSIONS 6 56 4 Su a et 20 sehr anni 15 11 2 Power Supply 24 50 don PONS san ee eRe 15 1 General information origio COPYRIGHT This manual contains information that is subject to copyright All rights reserved This manual shoul
4. d not be photocopied otherwise copied or distributed completely or in part without the approval of ORIGIO a s Users of ORIGIO s products should not hesitate to contact us if there are any errors unclear points or ambiguities in this manual ORIGIO a s Knardrupvej 2 2760 M lev Denmark Tel 45 46 79 02 00 Fax 45 46 79 03 00 Internet www origio com Document No User Man TW37 Version no Version 2 Date March 2014 This instrument is constructed to comply with IEC requirements 2 Product overview Removeable Removeable cover Display On Off button PSU socket Authorize tubes to use are 14 ml round bottom tube 15 ml round botton tube origio 4 3 Unpacking the Tube Warmer TW37 Unpack the equipment Check the packing list to ensure all accessories are there Examine the packing material carefully for separetely packed items Check the Tube Warmer TW37 for external surface damage Check that the display is not broken or damaged 4 Attention origio Do NOT carry the Tube Warmer TW37 by the polycarbonate side panels 5 Accessories 5 1 Standard accessories 24 volts main adapter PSU and mains cable Item number 9001701802 Side panels Item number 9001701803 2 off Tube Warmer Stand Item number 9001701805 origio 6 6 User Manual 6 1 Definition of use The
5. els are to be cleaned with approved for IVF cleaning and decontamination material but not abrasive cleaning material Caution The Polycarbonate side panels can NOT be Autoclaved 7 2 Technical support and guarantee In case of malfunction contact ORIGIO custumer support for service support Caution Do not open the Tube Warmer TW37 or remove the identification label this will invalidate the guarantee Note The Tube Warmer TW37 is guaranteed for 24 month from the date of purchase origio 8 Changing the Set point Ensure the unit is switched on and the current temperature is indicated on the display 7 Programmed temperature ie 36 5 To change Values press oo Changes to value required To save exit press buttons Current tempera ture ie 37 0 Note When in the settings menu if a button is not pressed within 5 sec the menu will jump back to the normal operational display with temp 37 0 9 Calibration To Calibrate the Tube Warmer TW37 it is important to put in the password to enable critical data change 9 1 Temperature calibration The following steps are followed for temperature calibration Press and hold for 5 seconds Display will flash between Press slowly 6 times and go to Display will flash between origio n origio Wait and press to five second Appears at display Press several time turnover parameter and go to Display will flash between By usin
6. g arrow up and down type in new off set value This value must flash once before you exit as this confirm the value is set into memory Press Back to normal display mode ie 37 0 origio 9 3 Re Enter Password protection Press and hold for 5 seconds Display will flash between By using arrow up and down type in new off set value Confirm by pressing Back to normal display mode ie 37 0 The unit is now return to the normal display 9 4 Auto Tune procedure This procedure is only used when the Tube Warmer TW37 is first powered up from cold This is tuning of the unit to the ambient temperature It is the amount of current Amps required to reach set point based on the room temperature this is to be done when unpacked from new Externally with another thermometer measure the temperature of the unit and follow the Auto tune procedure below Press and hold for 5 seconds EunE To exit press Back to normal display mode ie 37 0 The unit is now return to the normal display 10 Standard settings Value Parameters This information is only for setting up the controller should it have to be reset due to failure the data is not for general user setting m 03 vo 9 Leu 9 cu jo Fev 9 Lem 9 mw zs origio origio 11 Technical data 11 1 Dimensions Tube Warmer TW37 external dimensions
7. nector on the back of the Tube Warmer TW37 Then connect the power supply to power mains Use only the power cord supplied with the Tube Warmer TW37 un approved power supplies may damage the unit and invalidate the warranty 6 6 Start up Press on off button on the back of the Tube Warmer TW37 The display and lights K1 led and K2 led will start flashing after 3 seconds the actual temperature will appear on the display At this point the Tube Warmer TW37 will automatically begin to warm up to the set point temperature This is indicated by the led K2 flashing Kee O o The temperature will reach 36 37 degrees within 8 minutes but true stabilisation of the temperature will take approximately 60 minutes When the temperature is stabilised the Tube Warmer TW37 is ready for use Caution It is important at this point that none of the settings should be changed Note After each use remove the power supply from the connection at the rear side origio 7 User maintenance 7 1 Cleaning Main body of Tube Warmer TW37 is to be cleaned with soft lint free cloth soaked with hot water add mildly acidic neutral or mildly alkaline detergents if necessary Caution Do not use any abrasive cleaning agents or high pressure cleaners and DO NOT autoclave Note The Tube Warmer TW37 has limited resistance to organic solvents eg Sprits benzol etc The Polycarbonate removable side pan
Download Pdf Manuals
Related Search