moving head - Swiatla.Wroclaw.pl
Contents
1. 128 159 nternal program 4 160 191 Internal program 5 192 223 nternal program 6 224 255 nternal program 7 Color Wheel 0 8 Open white 9 17 Color1 18 26 Color2 27 35 Color3 36 44 Color4 45 53 Color5 54 62 Color6 63 71 Color7 72 80 Colors 81 89 Color9 90 98 Color10 99 107 Color11 108 116 Color12 117 127 Color13 128 189 Forwards rainbow effect from fast to slow 190 193 rotation 194 255 Backwards rainbow effect from slow to fast Color Wheel 10 0 250 No function 251 255 Half color effect Fixed gobos cont rotation 0 7 Open 8 15 Rot gobo 1 16 23 Rot gobo 2 24 31 Rot gobo 3 32 39 Rot gobo 4 40 47 Rot gobo 5 48 55 Rot gobo 6 56 63 Rot gobo 7 64 71 Rot gobo 8 72 79 Rot 9 80 87 Rot gobo 10 88 95 Rot gobo 11 a 96 103 Rot gobo 12 104 111 Rot gobo 13 112 119 Rot gobo 14 120 126 Rot gobo1 shake 127 133 Rot gobo2 shake 124 140 shake 141 147 Rot gobo4 shake 148 154 Rot gobo5 shake 155 161 Rot gobo6 shake 162 168 Rot gobo 7 shake 169 175 Rot gobo8 shake 176 182 Rot gobo9 shake 183 189 Rot gobo 10 shake 190 196 Rot gobo 11 shake 197 203 Rot gobo 12 shake 204 210 Rot gobo 13 shake 211 217 Rot gobo 14 shake 218 255 Fixed gobo wheel cont rotation slow to fast Prism 12 0 127 Open2. 128 255 open Rotating prism 0 7 No function 13 8 127 Forwards prism rotation from fast to slow 128 135 rotation 136 255 Backwards prism rotation from slow to fast Focus Control 0 255 Intensity O to 100 Lamp Contorl 0 99 No function 100 110 switch off 111 199 No function 200 210 Lamp on 211 255 No function Lamp on off reset internal programs 16 0 250 No function 250 255 Reset whole fixture 6 CLEANING AND MAINTENANCE The following points have to be considered during the inspection All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded There must not be any deformations on the housing color lenses fixations and installation spots ceiling suspension trussing Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances The electric power supply cables must not show any damage material fatigue or sediments Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed CAUTION CAUTION Disconnect from mains before starting maintenance operation 10 In order to make the lights in good condition and extend the life time we suggest a regular cleaning to the lights Clean the inside and ou
3. r is CE CONTENTS 1 FEATURES 2 SAFETY INSTUUCTIONS 3 DMX 512 control connection 4 Projector DMX start address selection 5 DMX channel details 6 CLEANING AND MAINTENANCE PLEASE KEEP THIS MANUAL FOR FUTURE NEEDS Thank you for your patronage We are confident that our excellent products and service can satisfy you For your own safety please read this user manual carefully before installing the device In order to install operate and maintain the lighting safety and correctly We suggest that the installation and operation should be done by the verified technician and follow the instruction strictly CAUTION Keep this device away from rain and moisture And unplug mains lead before opening the housing Every person involved with the installation operation and maintenance of this device has to be qualified follow carefully the instructions of this manual INTRODUCTION Thank you for having chosen this professional moving head You will find out it is a powerful and versatile device Unpack the device Inside the box you should find 1 One XLR connection cable 2 Two omega clamps 3 One safety rope 4 Manual 5 One warranty card and certification Please check carefully that there is no damage caused by transportation Should there be any consult your dealer and don t inst 1 FEATURES lt Voltage AC110V 2
4. 40V 50 60HZ lt Power 150W lt Light source PHILPS 2R or CHINESE LAMP 2R Span life 2000 hours DMX channel 16 channels e Luminous flux 180 000lux at 10 55000lux at 20mete Color 13 colors white Prism 8 facet rotation prism Focus Optical focus Beam angle 1 to 3 8 Frost Dimmer 0 100 linear dimmer IP rated IP20 Display LCD display Body Size 45x31x25cm e G W 16KGS Certificate CE ROHS ooo ooo oo ooo ooo oo oe e Color temperature 6800K 300K Control Mode DMX mode Auto mode Master slave mode sound active meters spot diameter 70cm rs spot diameter 150cm Pan Tilt 540 270 16bit electric correction with auto correction function Gobo wheel 14 static gobos open High speed shake effect with 16 bit resolution adjustment Strobe 0 13 times s with mechanical shutter and adjustable speed strobe effect 2 SAFETY INSTUUCTIONS 1 Important safety warnings CAUTION Be careful with your operations With a dangerous voltage you can Suffer a dangerous electric shock when touching wires This device has left the factory in perfect condition In order to maintain this condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual 4 Important Damages caused by the disregard of this user manual are not subject to war
5. gent or a similar qualified person in order to avoid a hazard CAUTION A Never touch the device during operation The housing may heat up CAUTION CAUTION Never look directly into the light source as sensitive persons may suffer epileptic shock Please be aware that damages caused by manual modifications to the device are not subject to warranty Keep away from children and non professionals 2 GENERAL GUIDELINES This device is a lighting effect for professional use on stages in discotheques theater etc the device was designed for indoor use only This fixture is only allowed to be operated with the max alternating current which stated in the technical specifications in the last page of this manual Lighting effects are not designed for permanent operation Consistent operation breaks may ensure that the device will serve you for a long time without defects Do not shake the device Avoid brute force when installing or operating the device While choosing the installation spot please make sure that the device is not exposed to extreme heat moisture or dust Please don t project the beam onto combustible substances The minimum distance between light output from the projector and the illuminated surface must be more than 15 meters If you use the quick lock cam in hanging up the fixture please make sure the quick lock fasteners turned in the quick lock holes correctly Operate the device only after ha
6. n the display located on the base of the device You can set the same starting address for all fixtures or a group of fixtures or make different address for each fixture individually Dmx Address A001 AXXX Lamp Control ON OFF Lamp power ON OFF D No signal Close Hold Sound Mode Auto 2 ON OFF Pan Reverse ON OFF 5 Tilt Reverse XX Microphone level ON OFF Factory Setting Current Hours XXXX Hours 6 Life Hours XXXX Hours Last Run Hours XXXX Hours E Timer Password Password XXX iz Clear Time ON OFF Temperature XXc Reset All 9 Reset Scan Reset Other Manual DMX PAN XXX Fix Position Password XXX 8 PAN XXX S Ineral Program Master Alone 5 DMX channel chart in details Channels chart 16 channels channel value function Channels Value Function 8bit 0 255 Pan Movement 2 Pan Fine 16bit 0 255 Fine control of Pan movement TILT 861 0 255 Tilt Movement Tilt Fine 16bit 0 255 Fine control of Tilt movement Scan Speed 0 255 max to min speed Shutter strobe 0 31 Shutter closed 6 32 63 shutter open 64 95 Strobe effect slow to fast 96 127 shutter open Dimmer intensity 0 255 Intensity O to 10096 Internal Programs 0 31 No function 32 63 Internal program 1 64 95 Internal program 2 8 96 127 Internal program
7. ranty The dealer will not accept liability for any resulting defects or problems If the device has been exposed to temperature changes due to environmental changes do not switch it on immediately The arising condensation could damage the device Leave the device switched off until it has reached room temperature This device falls under protection class Therefore it is essential that the device be earthed If protection screen lens or ultraviolet screen in the fixture is apparently damaged or is damaged to exceed their own effective degree such as cracked and gashed it must be replaced The electric connection must carry out by qualified person Make sure the available voltage is not higher than that is stated at the end of this manual Make sure the power cord is never crimped or damaged by sharp edges If this would be the case replacement of the cable must be done by an authorized dealer Always disconnect from the mains when the device is not in use or before cleaning it Only handle the power cord by the plug Never pull out the plug by tugging the power cord During initial start up some smoke or smell may arise This is a normal process and does not necessarily mean that the device is defective it should decrease gradually Please don t project the beam onto combustible substances If the external flexible cable or cord of this luminaire is damaged it shall be exclusively replaced by the manufacturer or his service a
8. tside lens each week to avoid the weakness of the lights due to accumulation of dust Clean the fan each week To make sure the smooth gobo rotation we suggest adding proper lube to the wheel each three month avoiding the excessive lube splashes during the gobo rotating A detailed electric check by approved electrical engineer each three month make sure that the circuit contacts are in good condition prevent the poor contact of circuit from overheating We recommend a frequent cleaning of the device Please use a moist lint free cloth Never use alcohol or solvents There are no serviceable parts inside the device except for the lamp Please refer to the instructions under Installation instructions Should you need any spare parts please order genuine parts parts from your local dealer 11
9. ving familiarized with its functions Do not permit operation by persons not qualified for operating the device Most damages are the result of unprofessional operation Please use the original packaging if the device is to be transported For safety reasons please be aware that all modifications on the device are forbidden If this device was damaged because of improper operation that is different from the instruction as described in this manual then the product would not enjoy the guaranteed warranty Furthermore any incorrect operation may cause accidents such as short circuit bums electric shock lamp explosion etc 3 DMX 512 control connection Connect the provided XLR cable to the female 3 pin XLR output of your controller and the other side to the male 3 pin XLR input of the moving head You can chain multiple Moving head together through serial linking The cable needed should be two core screened cable with XLR input and output connectors Please refer to the diagram below 6 4 Projector DMX start address selection All fixtures should be given a DMX starting address when using a DMX signal so that the correct fixture responds to the correct control signals This digital starting address is the channel number from which the fixture starts to listen to the digital control information sent out from the DMX controller The allocation of this starting address is achieved by setting the correct number o
Download Pdf Manuals
Related Search