MODEL D4400 “Upgrade” User Manual
Contents
1. DYNATRON 2 Simply the best InCar Security FREEPHONE 0800 508 904 MODEL D4400 Upgrade U ser Manual 14 07 2008 New Zealar d Secu eC surity Iy Association ry a3 RRO x E E _otar ARMING AND DISARMING To arm the D4400 press the lock button on the remote control supplied by the vehicle manufacturer Arming the system is accompanied by flashes from the indicators the number is dependant upon each manufacturer and optionally two sounds from the vehicles horn if connected not recommended To disarm press the unlock button on the factory remote control which is accompanied by a single sound if programmed Both the indicator and horn confirmation from the D4400 can be deleted where the factory system provides its own AUTO RE ARMING The D4400 will auto re arm only in vehicles with an auto re lock feature Some vehicles will re lock doors if the vehicle is not entered for a given amount of time INTRUSION DETECTION The D4400 is equipped with four zones of protection doors boot bonnet amp ignition Each zone can be triggered a maximum of three times after arming When a zone is triggered the horn and indicators will sound and flash for 30 seconds Both indicators and horn output will reset for five seconds after each 30 second trigger period before sounding due to subsequent triggers ENGINE IMMOBILISATION The vehicle s manufacturer usually provides engine immobilization The D4400 does provide another two ind2. SSORIES OWNERS DETAILS OWNER NAME DYNATRON MODEL MODULE SERIAL NUMBER VEHICLE REGISTRATION NUMBER VEHICLE MAKE VEHICLE MODEL INSTALLER DETAILS INSTALLER COMPANY NAME INSTALLER NAME DATE INSTALLED LABOUR WARRANTY PERIOD PHONE US ON 0800 508 904 TO REGISTER YOUR DYNATRON YEAR THIS IS AN ONLINE USER MANUAL COPY THE WARRANTY APPLIES FROM THE DATE OF ORIGINAL INSTALLATION OR IF UNKNOWN FROM THE DATE OF MANUFACTURE ON THE DYNATRON MODULE DYNATRON ACCESSORIES Dynatron offers a full range of sensors each one designed for a specific application Tilt Sensor Ultrasonic Sensor Battery backed up Siren DYNATRON Wag oo NAE w INA mA le A GPS TRACKING SYSTEM Dynapage Cellular pager Dynatrace GPS Tracking Systems Door Motors
3. e the product is found by DYNATRON to be in good working order Cost of any unauthorized towage of the vehicle will not be met by DYNATRON NZ LTD DISCLAIMER Dynatron systems have all been tested and approved to Australian and New Zealand Standards and only Dynatron Authorised Installers have been given the information to install your system correctly to those same standards Dynatron NZ Limited will accept no liability for any independent installation of this product its performance or operation We believe that the responsibility for a system performing according to published and verifiable standards rests primarily with you as the owner and end user But should you have any concerns about your Dynatron system then please call us at Dynatron direct during working hour s toll free on 0800508904 and speak to Customer Services or one of our Technical team We are here to help and we will see that you get Simply the Best InCar Security for your car PLEASE COMPLETE DETAILS BELOW AND REGISTER YOUR DYNATRON It is very important that you re DYNATRON Security System details are recorded below The units Serial Number is recorded in our secure database which is directly associated with the Emergency Override PIN and it is this PIN Number that will enable your security system to b e overridden REMEMBER A THREE YEAR WARRANTY ON THE MODULE ONLY IF THE INSTALLATION IS PERFORMED BY AN AUTHORIZED DYNATRON INSTALLER 12 MONTHS ON REMOTES SENSORS AND ACCE
4. een completed in full at the time of purchase and or installation and is produced when warranty service is sought The warranty does not cover general maintenance such as cleaning of bonnet switches door switches light switches etc nor replacement of consumable items such as pilot lamps or transmitter batteries Should a product defect become apparent within the warranty period DYNATRON NZ LTD will repair the product free of charge for parts only Labour to remove and install the serviced product will be the responsibility of the original installer and their prescribed labour Warranty terms and conditions This is a return to base warranty and should a mobile service be required a call charge may apply This warranty shall be null and void if 1 The product has been repaired by any other person other than by an authorized DYNATRON service centre 2 The product has been altered or tampered with in any way or the serial number altered defaced or removed 3 The defect has been caused by negligence by the owner or their agent 4 The product has not been operated correctly installed by an authorized DYNATRON installer or has been subjected to misuse or undue wear and tear 5r The control module is damaged by water THE WARRANTY DOES NOT COVER T HE FOLLOWING COSTS Transport of the product to and from DYNATRON service centres Insurance of the product in transit to or from the DYNATRON service centres Cost of any service call wher
5. ependent circuits of immobilization however they are only connected at special request DIAGNOSTICS Whenever the alarm system is triggered the memory of the module will be automatically updated with the number of the zone responsible The report will be displayed upon the next disarm command Both the indicators and status LED will flash a number of times The table below describes the number for each zone ZONE NUMBER ZONE NAME 1 Bonnet 2 Millivolt sensing 3 Doors amp boot switches Each zone will trigger a maximum of three times per arm cycle Once a zone has sounded the siren three times it is ignored until the next time the system is armed At no time does the immobiliser disarm PROBLEM SOLVING System won t arm disarm Ensure all vehicle doors are closed and ignition switch is off Check whether vehicle s central locking responds to remote control Ensure siren is switched on Ensure vehicle does not have a flat battery System won t trigger Ensure that you have allowed at least 40 seconds after setting the system before testing If testing boot ensure boot light comes on only when boot switch is operated it must not remain on constantly The remote fails to operate Try your spare remote transmitter Contact the dealer the vehicle was purchased from or vehicle manufacturer OVERRIDE The system can be overridden by means of a Personal Identification Number PIN Every unit has its own PIN This PIN is iss
6. ued with every system by means of a credit card sized PIN card Do not lose this card Do not leave it in your vehicle Do not tell anyone your PIN number Do store the PIN card in a safe and confidential place Storing the PIN number in a secure place in your cell phone is an ideal way to store the number OVERRIDE PROCEDURE 1 Insert the ignition key into the ignition switch and turn to the ON position The blue or re d status LED mounted on the dash will glow constantly 2 Turn the ignition key back to the ACC position the status LED will begin to flash slowly Count the number of flashes for the first digit in the PIN of the alarm immobiliser Return the key to the ON position when the correct number is counted 3 Repeat step 2 for the remaining digits in the PIN When all four digits are entered the indicators will flash once the system will then disarm Please Note Any digit marked 0 indicates 10 flashes NB gt If the engine is not started within 40 seconds of over riding the alarm immobiliser will immobilize the engine It is necessary to enter the PIN each time the engine is turned off and the system has auto immobilized WARRANTY This product is warranted by DYNATRON NZ Ltd P O Box 302 384 North Harbour Auckland New Zealand Subject to the conditions stated below to be free from manufacturing defects and faulty material within the warranty period stated below CONDITIONS That the warranty registration has b
Download Pdf Manuals
Related Search