Maintenance Guide - Matrix Cleaning Systems
Contents
1. place to another2. you wish to clean and depress the trigger To use the vacuum press the fan switch on the gun for the vacuum to begin 9 As water in the boiler is used it is automatically replenished from the water tank until the tank is empty 10 The tank level warning light and an acoustic signal will alert you that the water tank is empty and the steam will cease SWITCH THE POWER SWITCH TO O REFILL WITH WATER AND CONTINUE FROM NO 6 You will find the machine can be used immediately once switched back on Please note that you don t have to wait for the water to become empty before refilling This can be done at anytime Do s amp Don ts DO Read and understand user manual before carrying out any cleaning tasks DO Display Safety Warning signs in the correct places DO Maintain the machine in accordance with instruction manual DO Ensure correct PPE is worn DO Check ALL O rings are present correct and lubricated if required DO Check hose is not damaged DO Check electrical cable prior to plugging in DO Ensure Vacuum bucket is on correctly DO NOT Use the machine if you are untrained DO NOT Point the steam at other electrical apparatus DO NOT Use the machine to clean the machine down DO NOT Hold or touch the steam outlet This will be extremely hot DO NOT Pull the machine by the hose DO NOT Use if O rings are not present Change or replace DO NOT Use anything other than cold water in the wate
3. Matrix Steam Cleaner GUIDE e Quick Set Up Instructions e Do s amp Don ts e No Vacuum Suction steam amp vacuum Leaking Steam O ring Change Steam amp Vacuum Steam Only Steam Mop Kit e Replace Locking Clips on the Accessories Steam amp Vacuum e Vacuum Hose IMPORTANT Steam amp Vacuum Quick Set Up Instructions 1 Unscrew the filter cap and carefully fill the tank water tank with water Do not add any kind of cleaning chemical to the water tank 2 Connect the 13A plug to the mains supply 3 Connect rectangle plug on hose into the front of the machine ensuring the pin on the flap locates in to the top of the plug 4 Connect round vacuum hose into the front of machine ensuring it clicks into place he 5 Turn the Power switch from 0 to TY to start the machine The Power indicator light will illuminate 6 When the steam ready light on the front of machine illuminates the machine is up to temperature Approx 6 minutes 7 Before you start cleaning direct the nozzle into a suitable container and press the trigger on the handle to blow out any excess water from the boiler At this point the pressure will drop Release trigger on the handle and wait approx 2 minutes The machine will be ready to use when steam ready light has illuminated Choose the accessory that you wish to use Connect it to the steam hose by clicking into place 8 Now direct the steam jet onto the surface
4. ene tee help with the removal of the elbow in the same way grooves on the pin accessories Replace Locking Clips on the Accessories Steam amp Vacuum Discard Old and replace extension tube edge with new clips O ring Kit SUBA15 Unlocked Locked Position the notch on the clip The two positions above are to to the hole on the extension lock the accessory to the tube and re clip back on extension tube Ensure the clips are locked fully before use Push the red clip through the black clip Hose Correct Use Steam amp Vacuum DO NOT PULL ON THE HOSE The machines are too heavy and the hose will break This is the result of the hose if the hose is used to pull the machine around Please use the handle provided to manoeuvre the machine from one place to another KK K K K K K K Ensure the hose it put in the machine corrrectly and not twisted This will reduce the life span of the hose if correct care is not taken KK K K K K K K Hose Correct Use Steam Only Steam Mop Kit Once the machine has heated up Press the fan button on the hose handle to disperse the steam DO NOT PULL ON THE HOSE The machines are too heavy and the hose will break The wires will become visible at either end of the hose if it is used to pull the machine around DO NOT USE THE HOSE IF THE WIRES ARE VISIBLE Please use the handle provided to manoeuvre the machine from one
5. r tank No Suction on the Vacuum Vacuum Bucket Locate the vacuum bucket on the machine Ensure the lid is correctly on the vacuum bucket Re sit the vacuum bucket onto the machine Steam Leaking from Machine Steam leaking from the O rings maybe missing or front of the machine damaged Check they are both positioned within the Roll the second O ring over the top of the first one for ease grooves of the pin O ring Kit SUBA15 a J Replace the 2 x O rings on the steam pin a X as Hi Grease the O rings on a regular basis to preserve the life and help with the removal from the machine Steam Leaking from Hose Handle Steam amp Vacuum Steam leaking from the hose handle O ring Kit SUBA15 ae K EE A Ne x ay PS ija i T m Fo v j _ me ds O ring maybe missing or Replace the O ring on to damaged the steam pin Check the o ring is positioned within the grooves on the pin Grease the O rings on a regular basis to preserve the life and help with the removal of the accessories Steam Leaking from Hose Handle Steam Only Steam Mop Kit Steam leaking from the O rings maybe missing or Replace the 2 x O rings on hose handle damaged to the steam pin Check the o rings are Grease the O rings on a regular You can change and grease the ti d within th basis to preserve the life and o rings on this accessory pe l
Download Pdf Manuals
Related Search