LED NEON ROPE
Contents
1. _ FU BLF NEON XXXXAC fullwat _ LED NEON ROPE User Manual FU BLF NEON XXXXAC fullwat fullwat FU BLF NEON XXXXAC Information Sheet The LED neon tube was made by PVC plastic and it used brightness Top LED Utilizes the unique patented technology to produce to pass through pushes many times detains the formation to have the similar glass tube neon light to shine continuously the effect new plastic rope lamp It unified the LED advantage long life time the energy efficient the different color chooses brightness the environmental protection and the PVC Rope flexibility easy curving to install the modeling conveniently the anti impact not easy stave convenient transportation waterproof and anti ultraviolet Also it could be applied in the building decoration the modeling decorative lighting and the manufacture advertisement and the sign Product Information Operating LED Operating Cuttable Operating Packing XX 10M 20M 50M i Tolerance of measurement of luminous intensity is 10 2 The dominant wavelength dis derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device Specifications are subject to change without notice 1 2 is the off axis angle at which the luminous intensity is half the axial luminous intensity a 10 l nl IN gt x i Tolerance 52. All unit in mm nn ____ Front Cap en SE p End Cap E E E E E gt Zz gt The dimensions are not in scale Input Voltage 220V AC Supplied in 10 mts 20mts 50mts reel fullwat Fullwat _Fu BLF NEON xxxxac Information Sheet CAUTIONS TAA Exploitation conditions 1 In order to guarantee that the LED life and thase environment cannot make any force when the product lighting use to pull the power cables forbids to collide in order to avoid damages LED 2 For can better lighting effect of the product each 50 meter long strip must connect the main power source 3 Must guarantee that each power source GND mustonnect 4 Should not be curving in the diameter 60mm following radian please do not rebate in order to avoid damage lamp bead or break Storage 1 The Flexible SMD Strip should be stored at stored at 30 or less and 70 RH or less after being shipped and the storage life limits are 3 months 2 Ifthe Flexible SMD Strip is stored more then 3 months they can be stored for a year in a sealed container with a nitrogen atmosphere and moisture absorbent material 3 Please avoid rapid transitions in ambient temperature especially in high humidity environments where condensation can occur Static Electricity 1 Static electricity or surge voltage damages the Neon Rope 2 Itis recommended that a wristband or an anti electrost
3. atic glove be used when handling the Neon Rope 3 All devices equipment and machinery must be properly grounded 4 Itis recommended that measures be taken againstsurge voltage to the equipment that mounts the Neon Rope Heat Generation 1 Thermal design of the end product was most importance Please consider the heat generation of the Flexible SMD Strip when making the system design 2 The thermal resistance of the circuit board and density of Neon Rope placement on the board as wel as other components was the important factor affecting the coefficient of temperature increase per input electric power 3 It must be avoid intense heat generation and operate within the maximum ratings given in the specification 4 The operating current should be decided after considering the ambient maximum temperature of Neon Rope Others 1 Care must be taken to ensure that the reverse voltage will not exceed the absolute maximum rating when using the Neon Rope with matrix drive 2 The Neon Rope described in this brochure is intended to be used for ordinary electronic equipment such as office equipment communications equipment measurement instruments and household appliances Consult Wah Wang s sales staff in advance for information on the applications in which exceptional quality and reliability are required particularly when the failure or malfunction of the Neon Rope may directly jeopardize life or health such as for airplanes aerospace submersib
4. le repeaters nuclear reactor control systems automobiles traffic control equipment life support systems and safety devices 3 User shall not reverse engineer by disassemblingor analysis of the Neon Rope without having prior written consent from Wah Wang When defective Neon Rope is found the User shall inform Wah Wang directly before disassembling or analysis Warning f Please note the careful operation in the power source connection s situation will touch the alternating current supply end possibly to cause your safety In the actual application the power source should retain 20 remainders guaranteed that the sufficiency the voltage lightens LED Installs as far as possible the product in the appropriate environment Pays attention to the power cable in the installment process positive and negative extremely please do not wrong power source and product voltage to be whether correct in order to avoid creates the product the damage fullwat Information Sheet 4 7 4 Fullwat _Fustr neonoonxac Installation Cautions Installation 1 Cut the LED NEON ROPE on the cutting mark only Before the use please the product strict comparison technical parameter work according to the parameter list correspondences voltage parameter 10 voltage range AC100 AC120V or tne AC220 240V Neon Rope belt refuses in the water t
5. o use by against creates the leakage wound The Neon Rope must was cut the cutting mark place The best cutting is power on the Neon Rope examined that marks whetherin two LED to off the power Levels the Neon Rope with the nipper that could avoid the LED and the internal electric wire the waterproof of cutting and re connecting place quality must solve by customer if the Neon Rope defect or burn Wah Wang is not responsible to service and the replacement Customer must cut out the extending of the Neon tube after cutting by nipper it could avoid short circuit after glued the end and front cap Please not power on when installation or assembling the accessories Customer must sure the connecting is well before power on The connectionof Neon Rope should with the voltage to be consistent when connects two rope bodies certainly must maintain the polarity is consistent Only the specification is the same the voltage same two sections of Neon Rope can serially connect mutually the series connection total length cannot surpass the biggest permission use length The Neon Rope couldn t be distorted continuous perseverant bended would easily defect the internal wire The neon tube in the outdoors or indoors use should complete the safety precaution measure it could avoid reduced fire electric shock and personal injuries When install the power cable must have the electric circuit protector if the power point have the fuse perhaps uses leaks
6. slot FU BLF NEON TUBE to fixed Rope surface Photo 6 Fixed for 360 degree install A D I L Installation drawin 2 Fullwat
7. the switch When install fixes the plastic holding slot by screw the wall surface then insert the Neon Rope into the slot pays attention to thelight emitting area must face on The front and end cap must use the dense silicogel to seal the waterproofing Please do not wrap up with any object cover neon tube surface If the Neon Rope flash and running water pleaseuse Wah Wang LED controller 2 Connect the front cap FU BLF NEON ENDCAP 3 Connect the end cap FU BLF NEON FRONTCAP 4 Linear Installation FU BLF NEON TUBE fullwat Fullwat FU BLF NEON XXXXAC Information Sheet Installation Method The Top LED Neon Rope could soft bending to changedifferent for form Also it is easier with differert material surface to installation Suitable for different application Included decorative wall etc You could desigrifdrent form for your project and request Photo 1 The LED Neon Rope must marking on the Rope and use special a scissors to cutting Photo 2 Fixed for linear on the installation must use plug holding slot FU BLF NEON TUBE to fixed Rope surface Photo 3 Fixed for curve on the installation must use plug holding slot FU BLF NEON TUBE to fixed Rope surface Photo 4 Fixed for 90 degree on the installation must use plug holding slot FU BLF NEON TUBE to fixed Rope surface Photo 5 Fixed for 180 degree on the installation must use plug holding
Download Pdf Manuals
Related Search