NS-SB314 User Guide Soundbar Home Theater Speaker
Contents
1. Power button and Press to turn on the soundbar the indicator turns green Press again to return the soundbar to standby mode indicator J source button Input source indicator Sound mode indicator DSP button VOL buttons BASS button and indicator Press repeatedly to cycle through the available sound sources Bluetooth Source 1 Optical Source 2 AUX IN Source 3 RCA Indicates which source is selected to provide sound for the soundbar Bluetooth Source 1 Optical Source 2 AUXIN e Source 3 RCA Lights to indicate the DSP sound mode selected Standard Lets you enjoy normal sound Theater Best for enjoying movies Bass frequencies are enhanced News Select for clear voice reproduction Press repeatedly to cycle through the available Digital Signal Processor DSP sound modes Standard Theater News The corresponding indicator on the soundbar top panel lights to indicate the sound mode selected Press to increase or decrease the volume of the soundbar Press to activate the bass frequency enhancement The indicator turns green Press again to turn off the bass frequency enhancement www insigniaproducts com 3 N S G N A NS SB314 Soundbar Home Theater Speaker System with Bluetooth Back view t component Descption 1 Hanging brackets Use to hang the soundbar on a wall 2 SUBWOOFER OUT jack Connect a powered subwoofer to this jack 3 DCIN jack Connect2. Re pair your soundbar and your Bluetooth device Make sure that your soundbar is not paired to another Bluetooth device Make sure that your soundbar and Bluetooth device are both in pairing mode Make sure that your Bluetooth device is not connected to any other device Make sure that you have selected NS SB314 on your Bluetooth device Shorten the distance between your soundbar and your Bluetooth device If battery on your Bluetooth device is low recharge the battery Shorten the distance between your soundbar and your Bluetooth device Put your soundbar into pairing mode then refresh your list of Bluetooth devices For more information see the documentation that came with your Bluetooth device Specifications Designs and specifications are subject to change without notice Power output 39W total left and right channel 8W 10 THD N built in subwoofer 23W 1 THD N Frequency response 150 Hz 15 kHz Subwoofer output 2V Dimensions approx 31 5 x 3 4 x 2 5 inches 800 x 87 x 64 mm WxDxH Weight 4 6 Ibs 2 1 kg Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules Operation of this product is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply within the limits for
3. a class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced technician for help FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user s authority to operate this equipment Canada ICES 003 statement This device complies with Industry license exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired
4. spill water or any liquid on the remote compartment before using the remote control control Do not place the remote control on a wet for the first time cared 2 Point the remote control directly at the IR sensor Do not place the remote control in direct on the front of the soundbar You must be sunlight or near sources of excessive heat within approximately 23 ft 7 m of the Ifyou are not going to use the remote control for a long time remove the battery to avoid any damage that may be caused by leakage and E een IR Sensor soundbar www insigniaproducts com Installing or replacing the remote control Digital connections best battery C 1 Open the battery cover latch on the remote If you use the OPTICAL connection change the control device s audio output to PCM format Refer to the manual you received with the output device for additional information 1 Connect one end of the digital optical cable not included to your soundbar Connect the other Squeeze end into the Digital Optical Output port on your audio source devi Pull 2 Remove the old battery if necessary and insert the new 3V lithium battery CR2025 into the battery tray Match the polarity of the new battery with the plus sign in the battery tray 3 Slide the battery tray back into the battery compartment until it clicks into place Digital optical cable not included The battery
5. the screws Improper installation can result in serious injury or damage to your soundbar If necessary seek the assistance of a professional INSIGNIA Using your soundbar This system lets you to access four different sound sources Source 1 Optical Source 2 AUX IN Source 3 RCA and Bluetooth Listening to your soundbar 1 Press the W Power button to turn on your soundbar The power indicator turns green 2 Turn on the audio source device connected to your soundbar and begin playback 3 Press the J button on the soundbar repeatedly to select the audio source or press the source button on the remote control until you hear sound from your soundbar If you use the OPTICAL connection you must change your device s audio output setting to PCM format Refer to the manual you received with the output device for additional information 4 Adjust the volume on your soundbar or the audio component to a comfortable level Continuous use of high volume sound may permanently damage your hearing 5 Press the Power button again to turn off your soundbar The standby indicator lights red Troubleshooting Check this list for a possible troubleshooting solution before calling for service Possible Solutions The power does not come on The remote control does not work No sound or very low level sound is heard from the soundbar Your soundbar is not working properly 10 Make sure that
6. E LIMITATION MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE Contact Insignia For customer service please call 1 877 467 4289 www insigniaproducts com INSIGNIA is a trademark of Best Buy and its affiliated companies Registered in some countries Distributed by Best Buy Purchasing LLC 7601 Penn Ave South Richfield MN 55423 U S A 2014 Best Buy All rights reserved Made in China 13 INSIGNIA www insigniaproducts com 1 877 467 4289 U S and Canada or 01 800 926 3000 Mexico INSIGNIA is a trademark of Best Buy and its affiliated companies Registered in some countries Distributed by Best Buy Purchasing LLC 7601 Penn Ave South Richfield MN 55423 U S A 2014 Best Buy All rights reserved Made in China V2 ENGLISH 14 0307
7. IA 5 When pairing is completed the Bluetooth Positioning the soundbar indicator on the top of your soundbar turns on e Improper installation can result in serious injury or Some devices such as an iPhone connect damage to your soundbar If necessary seek the immediately after pairing so the Bluetooth assistance of a professional indicator on your soundbar remains on Other devices such as notebook computers may ask you if you wish to connect In this instance the Cautions Bluetooth indicator continues to blink until a If you are installing screws into drywall or concrete connection is established use wall anchors designed for that type of surface Your soundbar saves pairing information for up to eight devices However it can only be You can set the soundbar on a flat surface connected and playing content from one device at a time When you turn on your soundbar it automatically connects to the last connected device if that device is in range To connect toa different paired device you have to turn off Bluetooth or unpair from the currently paired device and manually connect to the other TT __ _ paired device Disconnecting your device Turn off the Bluetooth function on your device Reconnecting your device If you move out of range or turn off the Bluetooth feature on your Bluetooth device the soundbar disconnects from your device When this happens OR the Bluetooth ind
8. User Guide Soundbar Home Theater Speaker System with Bluetooth INSIGNIA NS SB314 Before using your new product please read these instructions to prevent any damage INSIGNIA Important safety instructions cece eee eee e cence eee 1 PISGEMENE acridine ee e decedent EE O E note A ER A 1 Using close to a TV or computer wk eee ete ete eee 1 IRFOCUICE ON iei een tla eect E uticka te E 2 Package contents iia iets vas wa aed hae aa Gem eases 2 Soundbar features fons neure Sonate Mees E ESERE RER 3 TOP V EW ei einde eet na a aaa a a E Aa AEE E Mana aia ae 3 Back MEW 002s su leatanatuensaisets EE EE E E E E EEE E e 4 Remote control sssssuusunnsssesrrressesssererrrssssrrrrerre 5 Using the remote CONtIO cece cece cece tence e ee ee eens 5 Installing or replacing the remote control battery 6 Setting up your SOUNGDAl sesceenis ieee dee iad yee dee aee edd ee ees 6 Connecting the soundbar required cece eee cee tence eee 6 Connecting the soundbar optional 0 ccc e cence eee ee 7 Positioning the SoOUNCbar 0 cece cece cence e tee e eee nees 8 Mounting your soundbar on a wall optional 9 Using your soundbar 4 cs eiteees eased endian tee denser ecectes 10 EROMDISSIOOLING casts sor us doce ith awe od venok a sae Ae etrane aoe wma es 10 Specifications veerra ai EEEE eu baad EEE wees 11 Legal NOTICES an eo E E a r a E S AE 11 One year l
9. e same amount of protection as the original packaging To obtain warranty service in the United States call 1 888 BESTBUY Canada call 1 866 BESTBUY for Future Shop call 1 800 663 2275 Call agents may diagnose and correct the issue over the phone Where is the warranty valid This warranty is valid only in the United States and Canada at Best Buy or Future Shop branded retail stores or websites to the original purchaser of the product in the county where the original purchase was made What does the warranty not cover This warranty does not cover Customer instruction education Installation Set up adjustments Cosmetic damage Damage due to weather lightning and other acts of God such as power surges Accidental damage Misuse Abuse Negligence Commercial purposes use including but not limited to use in a place of business or in communal areas of a multiple dwelling condominium or apartment complex or otherwise used in a place of other than a private home Modification of any part of the Product including the antenna Display panel damaged by static non moving images applied for lengthy periods burn in Damage due to incorrect operation or maintenance INSIGNIA Connection to an incorrect voltage or power supply Attempted repair by any person not authorized by Insignia to service the Product Products sold as is or with all faults Consumables including but not lim
10. e soundbar should be placed on a sturdy flat surface that is free from vibration or mounted on a wall Do not put the soundbar on an uneven or unstable surface where it may fall and cause damage Using close to a TV or computer Some older TVs and computer monitors are magnetically sensitive devices and as such are likely to suffer discoloration or picture distortion when conventional speakers are placed nearby If discoloration problems persist try moving the soundbar away from your TV or monitor INSIGNIA NS SB314 Soundbar Home Theater Speaker System with Bluetooth Introduction Congratulations on your purchase of an Insignia Soundbar Home Theater Speaker System with Bluetooth The soundhar is designed to be suitable for use with today s LCD and plasma flat panel displays and it can either be mounted on the wall or placed on a TV stand This user manual explains how to correctly install operate and get the best performance from your Soundbar Home Theater Speaker Read this user manual carefully before installing your system and then keep it handy for quick reference Package contents eee Soundbar AC Adapter LEEN Ss User Guide Quick Start Guide RCA Audio Cable 3 5 mm Audio Cable NS SB314 Soundbar Home Theater Speaker System with Bluetooth INSIGNIA Soundbar features Top view g 8 componen Dect 1 2 3 Standby indicator Lights when the soundbar is in standby mode
11. icator blinks on and off You can mount the soundbar on a wall To Restore the connection Move the music device back into range within 33 feet and make sure there is a clear line of sight and there are no obstructions between the soundbar and the device The connection is automatically reestablished and the Bluetooth indicator lights solid blue The auto connect feature may not work with some Bluetooth devices if this occurs use your Bluetooth device settings menu to manually select the soundbar from the list of found Bluetooth devices Connecting to a different device 1 On your Bluetooth device you are currently connected to turn off the Bluetooth function or unpair the soundbar in your Bluetooth device list The soundbar can now be connected to another Bluetooth Device 2 Follow the section Bluetooth connection to connect a new device Receiving a phone call while playing music When a call is received while playing music through a phone the music will stop automatically When the call ends depending on the setting of your phone the current track may resume playback Mounting your soundbar on a wall optional You will need Wall mounting template Hammer Screwdriver Q aJ optionalior Dlana wood stud installation NEE EE G Tape me measure Screws 2 10x 1 wood screw or similar Croo Tape Wall anchors 2 m 1 Select a locat
12. imited warranty Insignia 2 cece ee eee eee 13 Important safety instructions N Qu BWN 10 11 12 13 14 15 16 17 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused fo
13. ion close to your TV and directly in front of the viewing listening position For best sound quality choose a location where sound waves are not blocked by furniture or other obstacles 2 Position the supplied wall mount template to the wall where you want to mount the soundbar Make sure the template is level A then tape the template to the wall B 3 Drill two holes into the wall where the template indicates then remove the template 4 Install wall anchors not included into the holes you drilled using the instructions that came with your anchors If you have drilled into a stud wall anchors are not required If you cannot drill into wall studs and must drill into drywall concrete or another type of wall wall anchors are required See the instructions that came with your wall anchors to determine the drill bit size INSIGNIA 5 Secure two screws not included to the wall or wall anchors if required The screws must protrude from the wall by about 1 4 Use a 10 wood screw or similar 1 1 2 in length The screw width must be about 3 16 and the screw head must be approximately 1 4 to 3 8 20 43 inches 519 mm _ Approx 1 4 in 6 8 mm Make sure that you use wall anchors that are suitable to your wall type if you need to mount the soundbar to drywall concrete or similar wall type 6 Align the speaker hanging brackets with the screws then hang the soundbar on
14. ited to batteries i e AA AAA C etc Products where the factory applied serial number has been altered or removed Loss or Theft of this product or any part of the product Display panels containing up to three 3 pixel failures dots that are dark or incorrectly illuminated grouped in an area smaller than one tenth 1 10 of the display size or up to five 5 pixel failures throughout the display Pixel based displays may contain a limited number of pixels that may not function normally Failures or Damage caused by any contact including but not limited to liquids gels or pastes REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT INCLUDING BUT NOT LIMITED TO LOST DATA LOSS OF USE OF YOUR PRODUCT LOST BUSINESS OR LOST PROFITS INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED WILL APPLY AFTER THE WARRANTY PERIOD SOME STATES PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOV
15. ns are secure and cables are not broken or damaged If you are using the OPTICAL connection make sure the source device s audio source is set to PCM format Refer to the documentation your received with the audio source device such as a TV DVD Blu ray player etc for additional information Connect to a different source device such as a TV DVD Blu ray player to see if the buzzing still occurs If it does not this may be an issue with the original source device Use a different connection method for example try Optical instead of AUX between the soundbar and the source device to make sure the jacks on both devices are still working Turn off or mute the internal speakers of your TV Refer to the TV s manual for instructions In most cases your TV remote will not control your soundbar Make sure that your Bluetooth device is turned on Bluetooth is turned on and NS SB314 is selected Turn up the volume on your soundbar Turn up the volume on your Bluetooth device Make sure that your Bluetooth device is not muted Make sure that you are playing music from your Bluetooth device Make sure that you have selected the Bluetooth source on your soundbar Make sure that your soundbar is not paired to another Bluetooth device Make sure that your Bluetooth device is not paired to a different Bluetooth speaker Shorten the distance between your soundbar and your Bluetooth device Turn your devices off then on
16. om INSIGNIA Connecting the soundbar optional Subwoofer connection e Connect one end of the subwoofer speaker cable not included to the subwoofer and the other end to the soundbar Subwoofer speaker cable not provided Backpanel of the soundbar Bluetooth connection Before you can use your soundbar with a Bluetooth device you need to pair your device to the soundbar Your soundbar must be on to make a Bluetooth connection Place the Bluetooth device within 30 ft 10 m of your soundbar To pair your devices using Bluetooth 1 Select Bluetooth as the input source by pressing the Bluetooth button on the remote control or the J source button on the soundbar The Bluetooth indicator on the soundbar will blink slowly 2 Navigate to your device s Bluetooth settings turn on Bluetooth then search for available devices a For iPad iPhone iPod touch i From the home page click Settings gt General gt Bluetooth b For Android Phone Tablet i From your smart phone tablet home page click Settings gt Wireless and networks ii Click to activate Bluetooth then click Bluetooth settings c For a PC or Mac you can find these instructions in the documentation that came with your computer or operating system 3 On your Bluetooth device select NS SB314 from the device list Repeat step 2 if NS SB314 is not displayed 4 Ifa PIN code is requested enter 0000 INSIGN
17. onnections Backpanel of the AUDIO m T udio Quality i Type v o i player smartphone elg Best m mD Digital optical cable not included 3 5 mm audio cable provided soundbar Note Some TVs may only have this type of connection available Good ae 35 immaudio cable included 2 After connecting power see Using your soundbar on page 10 Good o RCA audio cable included R NS SB314 Soundbar Home Theater Speaker System with Bluetooth RCA Audio Analog connections good 1 Foran RCA audio connection connect the right angled connectors of the RCA audio cable to your soundbar Connect the other end of the RCA audio cable into the Audio Output ports on your audio source device OUTPUT TV projector or DVD Blu ray player RCA cable provided Backpanel of the soundbar 2 After connecting power see Using your soundbar on page 10 Connecting the AC adapter After you have connected your soundbar to an audio source you need to connect it to an AC power outlet Make sure that the electrical outlet matches the AC adapter s input requirements of 100 240 V 50 60 Hz before connecting Use only the AC adapter provided Plug in the AC adapter only after all other connections have been made 1 Connect the AC adapter to the DC IN jack on the back of the soundbar 2 Plug the other end of the AC adapter into a power outlet or surge protector w insigniaproducts c
18. operation of the device Ce dispositif est conforme a la norme de l industrie RSS exempts de licence s Son fonctionnement est soumis aux deux conditions suivantes 1 cet appareil ne peut pas provoquer d interf rences et 2 cet appareil doit accepter toute interf rence y compris les interf rences qui peuvent causer un mauvais fonctionnement du dispositif This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment Cet quipement est conforme l exposition aux rayonnements IC limites tablies pour un environnement non contr l INSIGNIA 11 INSIGNIA One year limited warranty Insignia Definitions The Distributor of Insignia branded products warrants to you the original purchaser of this new Insignia branded product Product that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one 1 year from the date of your purchase of the Product Warranty Period For this warranty to apply your Product must be purchased in the United States or Canada from a Best Buy branded or Future Shop branded retail store or online at www bestbuy com www bestbuy ca or www futureshop ca and is packaged with this warranty statement How long does the coverage last The Warranty Period lasts for 1 year 365 days from the date you purchased the Product Your purchase date is printed on the receipt you received
19. r long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped To reduce the risk of fire or electric shock do not expose this device to rain moisture dripping or splashing and no objects filled with liquids such as vases shall be placed on it An apparatus with a three prong grounding type plug is a Class apparatus which needs to be grounded to prevent possible electric shock Make sure that you connect any Class device to a grounding type three prong outlet The wall plug is the disconnecting device The plug must remain readily operable INSIGNIA 18 Batteries should not be exposed to excessive heat such as sunshine fire or the like Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type Placement The soundbar cabinet is made out of plastic and is therefore sensitive to extreme temperatures and humidity Do not put it in locations subject to direct sunlight or in humid places such as near an air conditioner humidifier bathroom or kitchen Do not put water or other liquids close to the soundbar If liquid is spilled over the soundbar it may be damaged Th
20. should not be exposed to excessive heat such as sunshine heat registers or fire Battery chemicals can cause a rash If the battery leaks clean the battery compartment with a cloth If chemicals touch your skin wash immediately Make sure that the battery is disposed of correctly Do not burn or incinerate ce OUTPUT DIGITAL OPTICAL Backpanel of the soundbar Do not mix old and new batteries Remove the battery when the charge is 2 Change the device s audio output to PCM depleted format typically found in audio settings Refer If the remote control is not going to be used for to the documentation that came with your an extended period of time remove the battery audio source device for more information 3 After connecting power see Using your Setting up your soundbar soundbar on page 10 AUX IN connections good Connecting the soundbar required 1 Connect the right angled end of the 3 5 mm Choose one connection option shown below that audio cable to your soundbar Plug the other fits your audio source device such as a TV end into the Audio Output port or headphone DVD Blu ray player or gaming console You can jack on your audio source device connect several devices and switch the sound source as required Turn off or unplug all devices while you are making connections If you mounted your soundbar on a wall you must use the included right angle cable connectors for the AUX IN or RCA cable c
21. the AC adapter is securely plugged into the power outlet and the soundbar Remove any obstacles between the remote control and the IR sensor on the soundbar The remote control battery is exhausted replace it Point the remote control at the IR sensor on the soundbar Move closer to the soundbar The remote control is only effective to approximately 23 ft Make sure that the volume level of the soundbar or your component is set to an adequate level Make sure that the volume level is not muted Press the q mute button on the remote control again to restore the sound output Make sure the correct audio source is selected Press the J button repeatedly to switch to the correct audio source Make sure that the power is on and all connections are secure Make sure that the audio cable is connected to the audio output not the audio input of the source device If you are connected to an MP3 player make sure that the volume is turned up on the MP3 player Unplug the AC adapter from the wall outlet and then try plugging it in again after 30 seconds Possible Solutions The sound is breaking up or buzzing can hear sound from both my TV and my soundbar My TV remote does not control the volume of my soundbar No sound or low volume in Bluetooth mode Cannot establish Bluetooth connection My Bluetooth device keeps unpairing NS SB314 does not appear on my Bluetooth device Make sure all connectio
22. the AC adapter to this jack to power the soundbar 4 SOURCE3 RCA RandL jacks If your TV or other audio source device has RCA OUT jacks connect the RCA cables to your source device and these jacks 5 SOURCE 2 AUX IN jack If your TV or other audio source device has an AUX OUT or headphone jack connect the 3 5 mm audio cable to your source device and this jack 6 SOURCE 1 OPTICAL jack If your TV or other audio source device has an Optical OUT jack connect a digital optical cable not included to your source device and this jack 4 www insigniaproducts com NS SB314 Soundbar Home Theater Speaker System with Bluetooth N S G N A i Remote control oo Co componen scion 1 X Power button Press to turn on the soundbar Press again to put the soundbar into standby mode 2 SOURCE buttons Press to select the sound source for your soundbar Source 1 Optical Source 2 AUX IN Source 3 RCA gt Bluetooth 3 DSP buttons Press to select the Digital Signal Processor DSP sound mode Standard Theater News The corresponding indicator on the soundbar top panel lights to indicate the sound mode selected 4 e X Mute button Press to mute the sound from the soundbar Press again to restore the sound VOL buttons Press to increase or decrease the volume of the soundbar 6 BASS button Press to activate the bass frequency enhancement Using the remote control 1 Remove the plastic tab from the battery Do not
23. with the Product What does this warranty cover During the Warranty Period if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Insignia repair center or store personnel Insignia will at its sole option 1 repair the Product with new or rebuilt parts or 2 replace the Product at no charge with new or rebuilt comparable products or parts Products and parts replaced under this warranty become the property of Insignia and are not returned to you If service of Products or parts are required after the Warranty Period expires you must pay all labor and parts charges This warranty lasts as long as you own your Insignia Product during the Warranty Period Warranty coverage terminates if you sell or otherwise transfer the Product How to obtain warranty service If you purchased the Product at a Best Buy or Future Shop retail store location please take your original receipt and the Product to any Best Buy or Future Shop store Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging If you purchased the Product from a Best Buy or Future Shop online web site www bestbuy com www bestbuy ca or www futureshop ca mail your original receipt and the Product to the address listed on the web site Make sure that you put the Product in its original packaging or packaging that provides th
Download Pdf Manuals
Related Search