SHC-730N/P
Contents
1. ele SALES NETVVORK SAMSUNG TECHAMN CO LID Optics amp Digital Imaging Division 145 3 Sangdaewon 1 Dong J ungwon Gu Sungnam Kyungki Do Korea 462 703 TEL amp 31 740 8137 41 FAX amp 2 31 740 8145 SAMSUNG OPTO ELECTRONICS UKLTD SOUK Samsung House 1000 Hillswood Drive Hillswood Business Park Chertsey Surrey KT160PS TEL 44 0 1982 45 5308 FAX 44 0 1982 45 5325 www sanmnsungechwin com www sansungcciv com TECHWIN SAMSUNG OPTO ELECTRONICS AMERICA INC SOA Closed Circuit Division 40 Seaview Drive Secaucus N J 070 U S A TEL 201 902 0847 FAX 201 902 0429 TIAN IN SAMSUNG OPTO HECTRONICS CO LTD TSOE 7 Pingchang Rd Nankai Dist Tianjin P R China Post Code 300190 TEL 8 amp amp 222761 8 FAX 86 22 2761 6514 P No Z6806 0541 01A VAN 04 12 Cony TECHWIN HIGH SENSITIMTY COLORCAMERA INSTRUCTION MANUAL SHIC 730N P About this manual Before installing and using the camera please read this manual carefully Be sure to keep it handy for later reference CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s en2. HIGH SENSE UP e OFF e AUTO SSNR e OFF LOW eMIDDLE HIGH SPECIAL e D ZOOM PRIVACY DAY NIGHT SYNC IMAGEADJ PRESET RETURN EXIT Use the five Setup Menu buttons on side of the camera 1 Press the SET button to access the setup mode Setup menu is displayed on the monitor screen CAMERA ID OFF 2 Select the desired feature using the UP or DOWN button e Each time you press the UP or DOWN button the arrow indicator moves up or down e Move the arrow indicator to the desired feature item Select the function using Change the status using the UP or DOWN button the LEFT or RIGHT button 3 Change the status of the selected feature using the LEFT or RIGHT button 4 When completed move the arrow indicator to EXIT and press the SET button e For the mode with J you can access submenu e You can access submenu using SET button If you enter a camera ID the name will be displayed in the screen monitor 1 Press the SET button to display the setup menu and move the arrow indicator to Camera ID using the UP or DOWN button 2 Set Camera ID to ON using the LEFT or RIGHT button e f the camera ID feature is set to OFF the name will not displayed in the monitor 3 Press SET button 4 You can enter up to 15 characters Move the cursor to character enter location by using the LEFT or RIGHT button Select the desired character by using LEFT RIGHT UP or DOWN b
3. VW wsamsunecerv com 8 ig f EE 3 REMOTE t e As the connecting method varies with the instruments refer to the manual supplied with the instrument e f necessary you can connect the monitor to the REMOTE jack on the back of your camera For details see page 40 e Only connect the cable when the power is turned off e Set the 7502 Hi Z selection switch as shown below if you have an intermediate device Each model has different power specification Please check the name of the model and power specification before connecting to power source e The wire is polarized Be sure to connect the wire that white line is on covering to terminal and connect the other one to terminal e Use AC 24V 500m lt A or DC 12V 500mA power source for SHC 730N P Copper wire size AWG 24 0 22mm 22 0 33mm 20 0 52mm 18 0 83mm Resistance Q m Voltage Drop V m e As the voltage drop according to the length of the cable in the above table a camera may malfunction if there is an excessively long cable run Voltage for carrera operation 12V DC 10 Voltage drops in the above table are variable according to types of celble nranufacturer SETUP MENU CAMERA ID e OFF ON BACKLIGHT eWDR OFF WHITE BAL eATW AWC e MANUAL MOTION DET e OFF ON LENS e DC Video Manual SHUTTER e ESC AFLK MANUAL AGC e OFF LOW e MIDDLE e
4. WDR is chosen you can adjust the LIMIT You can select the level LOW MIDDLEHIGH WDR sensitivity is increased or decreased 4 When completed press the SET button 2 Notes e f you select manual in shutter menu you can t use WDR mode e f you select WDR mode the following phenomenon may appear by lighting condition In these cases do not select WDR mode Unnatural color change or unnatural phenomenon on the screen Noise of bright part on the screen e According to the area of bright part on the screen there may be the difference of WDR performance so be sure to adjust the degrees of the visual angle when installing your camera e f you change WDR LIMIT unnatural phenomenon may appear e For the optimal WDR performance in case of observing the object that is in the place of the changing illumination recommend to use Auto Iris Lens Video or DC type not manual Your camera provides 3 White Bal control modes You can select the most suitable one You can adjust the white balance 1 Press the SET button to display the setup menu and move the arrow indicator to White Balance using the UP or DOWN button 2 Set White Bal to the desired mode using LEFT or RIGHT button SHITE BAL ATH The four white balance control modes are as follows ATW Auto Tracking White Balance When color temperature is 1800 10500K select this mode m AWC Auto White balance Control The white balan
5. supplied and solder the lens Installing OCS Mout lens cable to the plug as shown below e Video type DC type Before mounting a lens please check whether it is a C mount or CS mount lens No 1 Pin Red Power source No 1 Pin Damping The back focus is set for the CS mount lens at the factory No 2 Pin N C No 2 Pin Damping No 3 Pin White Video signal No 3 Pin Drive e Mounting a CS Mount lens No 4 Pin Black GND No 4 Pin Drive it removing the protecting cap attach the lens into the camera by turning clockwise 4 Remove the protective cap and attach the lens to the camera by turning clockwise 5 Connect the lens plug to the auto iris connector on the right side of the p camera R Use the lens under the specification as shown Otherwise the lens can damage the camera or abnormal fixing may result Grrourt lens 10 nma less 6 Set the DC VIDEO selection switch to DC or VIDEO according to the type A OU of the lens A heavy lens may disturb the balance with the camera and possibly result in damage Don t use a lens heavier than 450g It is recommended to set the lens ALC mode to Av mode Average Pk mode can be occurred hunting e Mounting a C Mount lens 1 Attach the C Mount lens adapter by turning clockwise 2 Attach the lens to the camera by turning clockwise Connect the VIDEO Out jack to the monitor VIDEO In jack
6. IDEO eee IL DAN MD 01 vs v aaa 88g 888 amp npor fw yu IN OUT Dere M Lens Selection You can set the type of the lens and control the brightness of the screen 1 Press the SET button to display the setup menu and move the arrow indicator to Lens using the UP or DOWN button 2 Set Lens to the desired mode using LEFT or RIGHT button e You can select from DC Video Manual COLOR CCD CAMERA 30 User s Manual DC Video When using auto iris lens iT m An rT l ai D c 4o 7 mi Sy IL E TI s5 mE A ra t i ea S if oo When using Arto Iris Lens with Video type Adjust ALC volume on the lens properly Normally ALC volume should be turned all the way to Av Average According to the type of the lens used the lens may not perform properly In such acase adjust the volume level on the lens For using VIDEO LENS at first execute IRIS ADJ Press SET button locating the cursor on IRIS ADJ If operation fails Err Can t Close Turn down or Iris Test Err Flicker message is displayed Then you should adjust volume level Until Lens Level Adjustment OK message is displayed adjust volume level repeatly VIDEO LENS SETUP BRIGHTNESS BO iaa c 6 s 1 c IRIS ADJ VIDEO END e When trying to execute IRIS ADJ do it under as below conditions shoot a white paper or bright wall shoot light resourc
7. M Burst ON OFF SYNC INT LL COLOR TONE SHARPNESS p la trolled by OSD menu and 2C You can control the camera using OSD menu and RS 232C jack at a remote place Contact an authorized technician for inspection If you use your camera around smoke or unusual heat for a long time a fire may be caused Unless the surface is suitable it could cause falling or other hazards It could cause an electric shock It may result in fire electric shock or other hazards It may result in fire or other hazards m Configuration of The Menu m Setting Up The Menu e BACKLIGHT e WHITE BALANCE MOTION DETECTION s LENS SELECTION etanima siaii i tg QON Rerenga eee ee ee ee 36 SPECIAL Geeneen N er ee ere eee 37 e Installing Auto Iris Lens e Installing C CS Mount Lens m Connecting to Monitor m Connecting to Power en mw Z rr i as Oy Only use the camera under conditions where temperatures are between 10 C and 50 C Be especially careful to provide ventilation when operating under high temperatures It can cause the image quality to be poor Severe lighting change or flicker can cause the camera to work improperly It is one of the most important parts of the camera Be careful not to be stained by fingerprint It can cause malfunctions to occur It can damage the CCD If it get
8. UTS SV III built in DSP and 1 3 high density CCD allows bright and high quality images to be captured in ultra low light condition 0 13Lux at Color 0 001Lux at Sens Up mode AA gt z widen namic Range WDR ANd y ge WDR SV III DSP has Strong compensation performance in WDR So It always shows obvious clear and perfect light contrast picture in any environment pba R Samsung Super Noise ction SHC 730 has powerful DSP that can remove image noise efficiently and it shows clean and obvious image in low luminance The horizontal resolution of 520TV lines at Color mode and 570TV lines at BW mode can be achieved by using a high density CCD having Double Speed 410 000 pixels SONY CCD which provides clean noiseless and reliable pictures phag oye Day amp Night The camera provides automatic mode change over by sensing day or night conditions It can change color mode in the day condition for optimal color and BW mode in night condition for clear identification p g 7 Motion Detection A A The camera transmits an alert signal to the MD Output Terminal when it detects motion of an object If you connect an optional alarm to the camera you can get the effective surveillance DK 7 EO DC Lens Selectable The camera accepts 2 types of auto iris lenses DC type VIDEO type and is set with the VIDEO DC selection switch AA gt I C llaneous Function Privacy Fip H V REV D ZOO
9. button on Auto mode You can adjust brightness by increasing or decreasing the shutter speed EX x2 x32 x64 X128 e If you increase the number of shutter speed moving object gets an more afterim age e Under Sense up activated noise sports or a whitish phenomenon may appear in the picture as the sensitivity of the camera is increased This is normal phenomenon To reduce the noise on the screen 1 Press the SET button to display the setup menu and move the arrow indicator to SSNR using the UP or DOWN button 2 Set SSNR to desired mode using the LEFT or RIGHT mode LOW low reduction of the noise MIDDLE middle reduction of the noise HIGH high reduction of the noise OFF Deactivation S5HE MIQOLE e f you change the AGC menu from LOW to HIGH sensitivity is increased as well as noise on the screen e f AGC is OFF you can t select LOW MIDDLE HIGH on SSNR menu SPECIAL gt D ZOOM OFF PRIVACY DAY NIGHT PRESET RETURN EXIT 1 Press the SET button to display the setup menu and move the arrow indicator to SPECIAL using the UP or DOWN button 2 Press the SET button D ZOOM You can select an electronic zoom mode among x2 x4 x8 mode After selecting Zoom mode you want adjust PAN and TILT value by pushing the left or right key to locate the position that you want to see a PRIVACY To mask area which you want to mask OFF Deactiva
10. ce Connect it to AC power source e Chak the frequency of power supply 60Hz for NTSC 50H2 for PAL COLOR CCD CAMERA 43 User s Manual NTSC GHC 730N PAL GHC 730P PONER AC24 DC12 10 4 5W Total Poels 811 H x 508 V 795 H x 596 V C Effective Phels 768 H x 494 V 752 H x 582 V Size 1 3 inch Vertical double density interline GOD sS Scanning System 2 1 Interlace Y Synchronization Intemal Line Lock c Frequency Horizontal 15 734KHz Vertical 59 94Hz Horizontal 15 625KHz Vertical 50 00Hz Resolution 5201V Lines Min Color S7OTV Lines Min BW 520TV Lines Min Color 570TV LinesMin BW Video Output LOVp p 75Q2 Video 0 714Vp p Smc0280Vpp LOV p 5R Vdo Vp p Sync 0 3Vp p SIN Y signal 52dB AGC Off Weight ON Min lllunination O 13LuFL 2 at Color SOIRE 0 01LuyF1 2 at BVUSOIRE WDR 520B Day SNGE ee i Gain Control Low Middie High OFF Sdetable E White Balance ATWAWCManual 1800K 10 500k Hlectronic shutterspeed AUTOMANUAL 1 60 1 120 000se0 AUTO MANUAL 1 50 1 120 000sex is Sens Up ON OFF sdiectable linrit X128 C asp Built in i Motion Detection ON OFF Built in Alarm output connector RS 232C Built in SSNR Low Middle High OFF Sdectable FUP Built in Up Down Left Right D ZOOM Built in 8 PanTilt Privacy Function ON OFF 4 Proganmeable Zone IRIS Control DC Video Dimension 70W X SEH X 130 Dnm Operating tenperature 10t 50T 14F 122 O
11. ce is automatically adjusted in a specific environment In order to obtain the best result press the SET button while the camera focuses on white paper If the environment including the light source is changed you have to adjust the white balance again Manual To fine adjust select the Manual mode You can increase or decrease the red or blue factor while monitoring the difference on the screen Set to Manual mode and press the SET button Increase or decrease the value for red R Gain and blue B Gain watching the color of the picture and press the SET button when you obtain the best color 7 Notes e Proper White Balance may not be obtained under the following conditions in these cases select the AWC mode When the scene contains mostly high color temperature object such as a blue sky or sunset When the scene is dim If your camera faces fluorescent lamp directly or is installed in the place of the changing illumination Your camera transmits an alert signal when it detects motion of an object on the screen If you connect the camera to an external alarm you can pay attention to the screen when the alarm sounds This feature is useful when you have to monitor several screens simultaneously 1 Press the SET button to display the setup menu and move the arrow indicator to Motion Det using the UP or DOWN button 2 Set Motion Det to the ON mode using LEFT or RIGHT button SHOTION DET OFF Pres
12. closure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance A INFORMATION This equipment has been tested and found to comply with limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense WARNING Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment CAUTION To prevent electric shock and risk of fire hazards Do NOT use power sources other than that specified Do NOT expose this appliance to rain or moisture This installation should be made by a qualified service person and should conform to all local codes V vAsq gt ring Picture in Ultra Low illumination P
13. e For effective A FLK mode set WDR mode in Backlight menu to OFF A FLK mode is not effective with WDR mode e f the camera directly faces strong fluorescent light with ESC mode the image may become unstable e f you choose ESC you can adjust the brightness of monitor screen using the LEFT or RIGHT button e If you choose Manual mode you can t use WDR mode in Backlight menu e If you select manual or A FLK mode Sense up is not operated To get brighter picture 1 Press the SET button to display the setup menu and move the arrow indicator to GAIN using the UP or DOWN button 2 Set gain to desired mode using the LEFT or RIGHT mode HIGH Gain is increased or decreased from 0 to 34dB automatically as following the illumination MIDDLE Gain is increased or decreased from 0 to 27dB automatically as following the illumination LOW Gain is increased or decreased From 0 to 24dB automatically as following the illumination OFF Deactivation ABC MIQOLE You can always get the clear image with this function under night or low lighting level 1 Press the SET button to display the setup menu and move the arrow indicator to Sense up using the UP or DOWN button 2 Set Sense up to the desired mode using the LEFT or RIGHT button Auto When your camera is under night or low lighting level select this mode OFF Deactivation SEHSE UF AUTO e If you press the set
14. e or bright area more than 150lux COLOR CCD CAMERA _ 31 User s Manual Manual When using manual lens e When the auto iris lens is mounted you have to set the DC Video selection switch on the side of the camera properly according to the type of the lens The setup window displays DC or Video according to status of this selection switch refer to page 12 picture e If you select DC Video mode you can adjust the desired Brightness 3 When completed move the arrow indicator to END and press the SET button _ Shutter Speed Control You can control brightness of the screen by the shutter speed 1 Press the SET button to display the setup menu and move the arrow indicator to Shutter using the UP or DOWN button 2 Set Shutter to the desired mode using the LEFT or RIGHT button A FLK 1 100 for NTSC Model 1 120 for PAL Model Hickerless mode ESC When setting the optimal shutter speed automatically Manual When setting shutter speed manually SHUTTER 3 If you choose Manual select the optimal shutter speed e You can select speed from 1 60 to 1 120 000 sec NTSC Models 1 50 to 1 120 000 sec PAL Models itis possinle to adjust Sers Upe 2 X128 nude rrercelly e When the shutter speed is increased or decreased using the LEFT or RIGHT button you can find the difference by monitoring the brightness of the screen SET SHUTTER gt SHUTTER 1 60
15. izes the video signal between cameras without a synchronous generator The line lock synchronization is only used in the areas of 60Hz NTSC Models 50Hz PAL Models INT Internal synchronization LL External line lock synchronization If you choose LL you can adjust the desired phase Press the SET button You can adjust the desired phase from 0 to 359 LINE LOCK 225 2E Press SET to Return e When the power frequency is 50Hz you can not use line lock mode NTSC Models e When the power frequency is 60Hz you can not use the line lock mode PAL Models e Sync mode is fixed to INT in DC 12V input power IMAGE ADJ This includes the factors related to the image quality or special function H REV Set ON then each side of image left and right is exchanged on vertical axis V REV Set ON then image changes upside down TONE As you increase the value using left or right button the whole level would be brighter SHARPNESS As the value goes high edge of image become strong and obvious But if increasing the value too much some noise may appears on image and image may looks unnatural COLOR As you increase or decrease the value image chroma level increases or decreases but the burst level doesn t PRESET To reset your camera to factory default condition RETURN To move Top menu EXIT To finish setting menu Q 3 j e the reflected letters on mi
16. perating Humidity Max 90 RH Weight 480g COLOR CCD CAMERA 4 User s Manual DECLARATION OF CONFORMITY Application of Council Directive s Manufacturer s Name Manufacturer s Address European Representative Name European Representative Address Equipment Type Environment Model Name Beginning Serial NO Year of Manufacture Conformance to 89 336 EEC SAMSUNG TECHWIN CO LTD SAMSUNG TECHWIN CO LTD 42 SUNGJU DONG CHANGWON CITY KYUNGNAM KOREA 641 120 CCTV Camera SHC 730P 94120001 2004 12 01 EN 50081 1 1992 EMC Directive 89 336 EEC and 92 31 EEC EN 50130 4 1996 We the undersigned hereby declare that the equipment specified above conforms to the above Directive s Manufacturer SAMSUNG TECHWIN CO LTD Legal Representative in Europe Signature cr T D Signature Full Name YOUNG TAEK SON Full Name Position QUALITY CONTROL MANAGER Position Place CHANGWON KOREA Place Date 2004 12 01 Date
17. ra on an optional tripod The tripod must be equipped with the screw specified as shown below 1 4 20 UNC 20 THREAD L 4 5mm0 2nMm ISO standard or 0 197 ASA standard C Tripod Mounting Bracket You can remove and install this bracket on the top of the camera You must use the supplied screw or the equivalent within 4mm If not the bracket may not be fixed properly e The lens is not supplied with this camera Purchase a lens suitable for your Video Output Jack lt gt Power LED environment This camera accepts the auto iris lens and both C and Used to connect an external The LED turns on CS mount lens video monitor in jack when power is supplied 3 B Remote Jack If the lens is marked with fingerprints or other marks the image quality might be poor Used to connect a remoteplug It is recommended to use a high quality lens to improve the image quality under low illumination For using main functions it is recommended to use Auto Iris Lens with DC type REMOTE 1 Peel approximately 8mm from the end of the lens cable outer cover CLASS 2 ONLY D amp N Used to input Day amp Night Control Signal MD Output Terminal lt q Used to output motion detection signal Frame Ground lt ______ AC DC Power Terminal lt _ Used to connect an AC 24V or DC 12V power source m 3 Remove the cover from the iris lens plug
18. rror will be seen when activating H REV or V REV lf you connect a remote plug to the REMOTE jack on the rear of the camera as shown below you can access the menu setup mode from a remote place I REMOTE Tx Transmit Data GND Rx Receive Data D 1 RS 232C Communication Setting e Mode Serial DataBit 8 e Bit sec 9600bps Stop Bit 2 e Port Com e Parity None Flow Control XON XOFF 2 Setup menu Command Setup menu Command Set 153 Up Down Right Left 3 MD Motion Detection output Signal Level less than 10mA 4 0V 5 0V There is notion OV There is no motion 540 5sec 4 D amp N input Control Signal If you want to use EXT mode consist proper system that satisfy below condition e For DAY mode D amp N terminal should be open from external signal e For B W mode D amp N terminal should be short to ground Q 2 Notes You must turn the camera power off when you connect or remove the remote plug Troubleshooting lt lf you have trouble operating your camera refer to the following table If the guidelines do not enable you to solve the problem contact an authorized technician The image on the sarcen is dim Solution e Chek that the power cord and line connection bebwesn the carrera and monitor are fixed pproparly e Chaek that you have properly connected VIDEO cebleto the carrera VIDEO output jadk e Chaek that the DOMDEO sdection switch on the side of
19. s SET button ZONE NUMBER ZONE STATE TOP BOTTOM LEFT RIGHT SENSITIVITY END Select the two kinds of ZONE NUMBER 1 or 2 ZONE 1 covers larger area than 2 Turn on ZONE STATE then MD starts to be activated Move the cursor to the desired menu and adjust it You can increase or decrease the detection area adjusting TOP BOTTOM LEFT RIGHT values You can increase or decrease the detection sensitivity adjusting SENSITIVITY value Operating Your Camera When completed press END button Tips on Using the Motion Detection Feature e After selecting zone and sensitivity perform atest operation to make sure it works properly e If the lighting flickers the motion detection feature might not work properly e The object should occupy 10 or more of its zone The bigger the object the higher sensitivity e f the brightness of an object changes rapidly by sudden lighting change the camera may detect it as a motion e When this feature is activated another algorithm may take more time to be operated e This system does not guarantee prevention of fires or thefts The manufacturer is not responsible for any accident or damage e You can use the MD output terminal jack on the rear of the camera to connect an external alarm device For details see page 40 WWWSAMSUNGCCTV coM 8 PN D amp N MD V
20. s wet wipe it dry immediately If it is exposed to radioactivity Liquids can contain minerals that corrode For heated CCD it will be out of order the electronic components e lf the camera is exposed to spotlight or object reflecting strong light smear or blooming may occur e Please check that the power satisfies the normal specification before connecting the camera 1 High Sensitivity Color Camera C Mount Lens Adapter Used to attach C mount lens Tripod Mounting Bracket Screw Hole Used to fix the Tripod mounting bracket on the top of the camera 2 Auto Iris Lens Plug 3 Remote Plug 4 C Mount Adapter 5 Instruction Manual gt Back Focus Adjustment Lever Used to adjust back focal length m BACK FOCUS ADJUSTMENT LEVER When you don t obtain focused point after adjusting lens focus adjust the lever Auto Iris Lens Connector Used to connect Auto Iris Lens plug DC VIDEO Selection Switch Used to choose DC or VIDEO according to the type of your Auto Iris Lens Menu Setup Buttons Cover Menu Setup Buttons e SET Button Used to access menu mode Also used to confirm the setting e UP DOWN Button Used to choose the desired menu item It also moves the cursor up or down in the menu screen e LEFT RIGHT Button Used to change the parameter of the selected menu item It also moves the cursor the left or right in the menu screen 1 Tripod Mounting Hole Used to install the came
21. the carrera is set to a proper position according to the type of your auto iris lens e Are you using Auto Iris Lens with VIDEO type Adjust VR Lad properly refer to page 31 e Is las dained with dirt Clean your lens with soft dean doth St the nonitor to proper cordition e If the rrea is epod to too drong light change the carrera postion e Adjust thelens focus properly The image on the screen is dark Thecneraisnot working properly and the surface of the cneraishot Adjust the contrast feature of the monitor e If you hae an intenedae dai st the 7 H z popaly refer to page 19 Are you using the Auto Iris Lens Adjust the lad on the lens properly Chak thet you hane properly comected the carrera to an appropiate power source refer to page 20 COLOR CCD CAMERA 42 User s Manual Motion Detection function is not active The color of the pidure is not matched The image onthesdeen fliders L L mode isn t able to Solution Hae you set Motion Det nenu to CFF Hae you set SENSTTIMTY to too low Hae you set MDAree properly e Chak thet you have properly set the White Bal menu Isthe area fadng to dret anig or flUuoresart lighting Change the carrera postion e Are you using Auto Iris Lens Check that you have properly connected the lens plug to the Auto Iris connector on the side of the carrera Hae you comected your anea to DC power sour
22. tion ON Privacy mode activated Press the SET button SET PRIVACY AREA SEL AREA1 AREA STATE TOP DOWN LEFT RIGHT Press SET to Return 4 AREAS are selectable Select the area you want AREA1 AREA2 AREAS AREA4 Set AREA STATE ON using LEFT or RIGHT button Make the size of PRIVACY AREA by changing TOP DOWN LEFT RIGHT values DAY NIGHT choose color or B W mode COLOR color mode B W B W mode EXT It enables user to control DAY NIGHT mode by Inputing external signal AUTO Under general condition D N filter is fixed at DAY mode but under low luminance condition it change into NIGHT mode automatically The case of the opposition is also same gt Notes e When you use Auto Iris Lens with Video type do not set the level on the lens to too low Color BW may not change over automatically e When Gain in SET UP menu is OFF Color BW do not change over automatically e f AGC is OFF you can t select AUTO mode on DAY NIGHT menu e For the stable operation whenever the mode is changed over between color and BW mode five setup menu buttons on the camera do not operate for about 3 seconds e t is possible to turn on or off the burst signal on B W mode e The object may be more out of focus when using a source of near infrared light than using the visible light SYNC Two SYNCHRONIZATION modes are available INTERNAL and EXTERNAL LINE LOCK In LINE LOCK mode it synchron
23. utton Press the SET button to confirm the blinking character The first character is saved and the cursor in the bottom of the screen moves to the next position Repeats steps and until you create the full name you want e If you make a mistake while entering name Move the cursor to CLR and press SET button all characters will be removed If you want to correct each character locate the cursor on the position that you desire to erase using the arrow sign And correct the character 5 Select the position at which the camera ID will be located on the screen Move the cursor to Pos and press SET button The camera ID is displayed on the top left of the monitor screen Default position Select the position by using the 4 directional buttons then press the SET button to confirm the position 6 When completed move the cursor to End and press SET button 4 SV III DSP chip built in provides intelligent light level control to overcome the severe Backlight conditions 1 Press the SET button to display the setup menu and move the arrow indicator to Backlight using the UP or DOWN button EACELIGHT WOR J 2 SET Backlight to the desired mode using the LEFT or RIGHT button WDR In case that bright and dark parts exist on the screen at the same time your camera allows you to see both parts clearly OFF Deactivation 3 Press the SET button e When
Download Pdf Manuals
Related Search