Model MB100 - Manual
Contents
1. 724 Robbins Road Grand Haven Michigan 49417 616 842 7110 Phone 800 937 3253 616 842 0859 Fax 800 846 3253 Web www dakecorp com a JSJ business E mail customerservice dakecorp com technicalsupport dakecorp com Dake Tube Bender Manual Instructions and part list Manually operated Dake Tube Bender Manually operated 08212009 Thank you for buying Dake We hope you enjoy many years of using your New Dake Tube Bender If after reading this manual you still have any questions please give us a call e mail or stop by for a factory tour www dakecorp com 724 Robbins Road Grand Haven MI 49417 Phone 616 842 7110 800 937 3253 CAUTION Read and understand all warnings cautions attentions and instructions before operating this equipment CAUTION general When working always pay attention and be alert Be careful Be aware of possible Hazards CAUTION regulations Observe the law and regulations Check local regulations to properly dispose of oil and or items that have been in oil to dispose of properly ATTENTION tools Always check that your tools are in good condition and that the tools are suitable for the work to make ex don t use the pliers as hammers etc ATTENTION tampering It is severely forbidden to modify or to tamper with parts that can alter the standard working conditions CAUTION operator For no reason whatsoever must the operator have their hands in the area of the piece being bent dur2. d place it in the red handle and use the little pin to hold it in place as shown below Dake Tube Bender Manually operated 08212009 4
3. ing the pressing operation According to new legislation the employer will have to check that the operator has understood these notices THIS MACHINE IS DESTINED ONLY FOR THE USE IT HAS BEEN DESIGNED FOR ANY OTHER USE IS TO BE CONSIDERED IMPROPER AND THEREFORE THE MANUFACTURER CANNOT BE HELD LIABLE FOR ANY DAMAGE CAUSED BY ANY IMPROPER USE OR USE NOT EXPRESSLY MENTIONED IN THIS USER S MANUAL Dake Tube Bender Manually operated 08212009 2 Before operating this equipment review and understand the safety label below that is on the tube bender LG o BEWARE OF PINCH POINTS KEEP ALL BODY PARTS CLEAR OF MOVING COMPONENTS The picture above shows where this safety label is located on the machine Unpacking your New Dake Tube Bender Make sure you have all the parts supplied to assembly your Tube Bender N Little roller Piece holder Optional Flat die Dake Tube Bender Manually operated 08212009 3 Assembling your Dake Tube Bender 1 Remove your die pin and insert your red handle and the die in the slot of your die body line up the holes and reinstall the die pin 2 DO NOT tighten the die pin The pin head should just touch the gray die body If it is tightened it will lock up the parts and bend the die body 3 Take the piece holder and put it in one of the other holes as shown below This piece will be in different locations depending on the diameter of the material 4 Take the little holder an
Download Pdf Manuals
Related Search