Crypt n - crypton
Contents
1. USER S MANUAL OF CRYPTON MODEL OBMD 2 Congratulations for your choice You have in your posession the only real device for detection of treasures from a long distance result of more than 20 years of research and two years of experiments not in laborato ry but in real conditions at random spots and by using a simple metal detector for confirmation of the result The OBMD 2 is the natural evolution of OBMD 1 with lots of extra capabilities and improve ments that happened with the guidance of our customers THEORY Probably it is the only long range detector that works with the specific IR sensor MURATA which produces pulses when its surface is stroken from a particle or particles with sufficient energy The IR detector gives approximately one pulse 300 ms with a source of 1mR This sensitivity is sufficient to determine if the buried target is old or new A typical old buried target gives usually more than two pulses Here we use a larger special IR sensor which is the sim plest way to improve the sensitivity under the limit of 1mR The main difference that we re inter ested in is that the IR sensor usually coverts all the energy of the old buried target in pulses so that the pulse height can be used to determine the original energy in the metal The special IR detector is extremely sensitive to the IR band and must work in a special wooden space with a specific lens A source less than 1mR is sufficient to give this output signal Ho2. The warranty is not valid if interventions happen to the device by others not authorized by Crypton The warranty does not cover damages due to usage of plastic or metallic parts of the device The repair does not extend the initial warranty duration Any transport costs for the repair of the device charge the purchaser 22 In which case can open the device without needing to use authorized service In no case The device is hermetically sealed so this will result in its destruction If however you wish to open it do not change the settings Any re setting of the multi turn trimmers or movement of any part is strictly prohibited In this case the device is deregulated and becomes useless TECHNICAL CHARACTERISTICS Name Crypton OBMD 2 Long range Gold detector Size Smaller than an A4 page 175mm x 235mm x 48mm Detecting method DSFMD Detector emitting receiving pulses of 90 degrees antiphase loca tor Batteries 3 x 9 Volts PP3 alkaline Usage Exclusively for noble buried metals detection at a distance until 60 meters Auction S A 104 Aiolou street Omonoia Athens Greece
3. and our eyes which have the capability of realizing sparkles with a duration of 1 24 of a second can see them For any of the above cases it is necessary to be included in the device s equipment The battery clips inscribe which batteries you have to change Always use alkaline batter ies for no liquid leakages inside your device Second in preference are reloadable batteries For occasional use it is better to use exclusively alkaline ones BATTERY PLACEMENT For the battery placement open carefully their cover and you ll see three clips the two of them writing 18V and the other one 9V These labels have been put for only one reason Depending on which indication there is on the panel for battery drop you know which batter ies have to be replaced Because the space for the battery placement is limited you must first put the two extreme ones with their clips towards the screws of the cover push them left and right respectively so as to leave enough space for the middle one which is to be put last Attention Order is required at them and at the cables because their space is limited SETUP OF OBMD 2 IN YOUR COUNTRY Before you start the experiments at home or go out for search you must calibrate your OBMD 2 If you don t setup OBMD 2 you cannot use it It is very easy but very important What you need 1 A Tv screen Best one is an old Tvscreen but if you don t have one you can use an LCD monitor 2 A small scre
4. on how old the buried object is and cannot be more than 90 meters a distance feasible ONLY by night By day the maximum detection distance is reduced to the half approximately 40 50 meters In any case your device does not work like common metal detectors which are consid ered direct stimulation target detectors but as a detector that detects the phenomenon creat ed on the earth surface by the buried target and not the target itself Appropriate filters and chips are used for maximum reception sensitivity and function stabil ity of the device There is no similarity or relation with dowser devices It is clearly an electronic transmission and reception device adjusted and tuned exclusively for the detection of noble metals and always at detection order gold silver copper With the appropriate using experience you will have no unclear indication from the targets or indication uncertainty at your working space The detection direction or the time of day or night you re using the device play no role Theoretically each field has a greater warp in the North South direction In this specific case we could say that we could have a greater detection range in this direction and use this phenomenon to our benefit However experiments showed that the systematic research of an area can give results without the utilization of the physical magnetic directions at the research area For the correct usage of the device you must follow strictly th
5. right at a long path Approach the target slowly following the sound signal or optical Led signal Step a bit backwards and just confirm the straight line in which you get the signal Do this from another direction too At the intersection point of the two straight lines lies the target After some time you ll understand that it is not necessary for your device to function at maximum sensitivity If you have a gold target your device will get mad and the signal will be extended and continu ous always in the line of the target NOTE Sometimes as you walk scanning the area you get one and only signal at one and only spot Go a little bit backwards 2 to 5 meters and pass again over the spot If you get again a signal there is a very small nugget buried beneath you If you get no signal it means that the nugget is so small that the device absorbed its energy and there is no more energy to stimulate the device An important note If in a research area you get no signal from the target you thought that exists there but you get nearby the unique recurrent signal then you must take it seriously It could be a metal box at the spot of the unique signal which contains what you re interested in It hasn t been certified but always a stable permanent signal and no other from a distance in the same area must make you suspicious In areas free from noble garbage it is possible for the Gain and DC offset to function almost at the maximum
6. turn the device on ON Steadily turn right the Gain knob with your left hand and the device which you are holding with your right hand must look down towards the floor At some position of the Gain knob you have a sound signal You then remove your hand from the Gain knob If the sound signal doesn t stop turn a little bit left the Gain knob to stop it and then again remove your hand from the Gain knob You should know that Because the device has no armor its setting is only affected with the hand that touches the Gain knob The hand that holds the handle of the device does not affect at all its function This means that the real threshold of complete sensitivity is usually one or two clicks above the setting point Only with the method of leaving and touching the button can you be sure for the correct placement of the critical limit Now turn the device to look towards the television and approach it At some distance near it you get a sound signal Go back very little The sound stops If you approach the television slowly from far away with the device and you swing it left and right slowly you can see that only in the straight line during the movement you have again a sound signal and indeed at the same distance Inside the house you can have various false alarms All those are inter ferences from household devices When the device is set to its limit even the electrical power board is a source of interferences Perform tests and familiari
7. e instructions which in combina tion with the experience you ll get will give you the satisfactory result BASIC DIFFERENCES BETWEEN OBMD 2 AND OBMD 1 Apart from the greater sensitivity at the preamplifier state the basic difference is that the OBMD 2 is free to be adjusted by the user at whatever place on earth We have discovered previously that the stable adjustment of the device from us may not function correctly in other countries For that the different magnetic field of each area is responsible In this case extra functions have been added Adjustment of the gain from the user The device has a default gain adjustment from us If the user desires he can increase more the sensitivity with a maximum of x15 It is in the judg ment of the user if the area is free of electromagnetic parasites to adjust the gain Setup adjustment With this adjustment the user can setup the detection sensitivity to the ideal measure at his place on earth After the adjustment there is no need for this button to be adjusted again the user leaves in at the measure he has chosen Cooperation capability of OBMD 2 with a ground generator in case of very hard targets In that case the OBMD 2 is tuned automatically to the frequency of the generator and has the capability to detect a stimulating target very easily For this function you must have a genera tor with an output frequency of 10 3000Hz and an output power of more than 20W rms Additionally i
8. e spot where we ve detected this signal If we get no sound signal from the North South direction at the new spot it means the initial signal was real This strange north detection signal can occur when the Gain knob is set near its mini mum It usually occurs when the Setup is set far right or at 9 10 of its maximum red zone 11 Is the test with fresh gold possible No But the test with a quantity of copper over 10kg buried over 25 years is possible In this case you ll get an intermittent signal from a distance of approximately 5 meters from the target 20 Which emission sources does the device easily detect It has been tested and can detect very easily the portable police radars which calculate the speed with an IR laser at distances over 400 meters with visual contact Also it detects tv remotes but at a very small distance half a meter In general IR emission sources are easier detectable than radio frequency emission sources 21 Does the device have a warranty Yes The warranty duration is one year and for professional use it is limited to six months For the warranty to be valid it must be accompanied by the purchase invoice from you or from the initial purchaser The show of the proof of purchase is enough The warranty covers malfunctions caused by manufacturing defects and in no case are we obliged to replace the device The warranty does not cover malfunctions caused by bad use or bad maintenance of the device
9. how experienced and insistent you are To learn more on where to search for valuable buried objects perform a control ask and study on places with possi ble interest for your research Let s start with the detection area The direction in which you re moving has no importance The only thing that s important is the slow scanning of the area and in case you get any signal to insist on checking it from different spots so as to make sure the exact spot of the target and if this target has any inter est in digging Remember small target small signal big target big signal Also the older the target the stronger the signal you receive and of course from a greater distance The scanning is done slowly from left to right or reverse parallel to the ground Always control all the spots where you receive a signal because none is random and they all need their research Remember that in open spaces mountain field woods if you get a signal and there are no high voltage cables or a generator around at a distance of less than 70 meters the signal is real and comes from a buried object and is not a random interference First of all you must know the use of the buttons knobs and trimmer Main Switch ON OFF AND GAIN down left It is the main function switch of the device and at the same time it adjusts the gain of the device When you have adjusted correctly your device use ONLY this knob for your research DC offset The functi
10. ly if it is gold silver or copper 6 If there is gold in a metal box buried for many years can the device detect it Probably not If however the metal box is eroded due to oldness the gold s detection is relatively easy But the detection range is reduced to approximately 1 5 of the range when the same gold quantity is buried freely at the same spot If the gold in the box is put inside an insulator for example grease tar or wax its detection in no longer possible We only get some weak sound indications that do not offer us sure confirmation 7 If there is gold inside a jar buried for many years can the device detect it If the jar is well roasted it works as a porcelain insulator and the detection of its content is not possible If is it cracked or the ground humidity can somehow penetrate it with time there is no detection problem 8 If there are noble metals in vacuum inside a cave or inside an old prefabricated burial place always in vacuum is their detection possible It hasn t been tested we don t know about objects ageing until 150 years For very old ones yes it can It has been confirmed 9 Can gold put in a wall and at quite some height above ground level be detected It hasn t been tested we don t know 10 We have a strong signal in the North South direction How can we be sure that it is a real signal and not a signal from the earth s magnetic field We just head parallel further from th
11. mportance has been given to the size the device is smaller than OBMD 1 and to the weight only 680g with the batteries for a pleasant research GENERALLY To be successive with a treasure detector you must 1 Use a high tech detector designed for the type of treasure you re looking for 2 Learn how to use your detector correctly 3 Perform a correct and methodic research at the area where there are possible hidden treasures 4 Be insistent The OBMD 2 is designed to find exclusively non ferrous metals gold silver and less copper from a great distance and at a depth until 7 meters This device is very strong and easy to use The usage manual is offered to help you under stand better how to use the detectors of this technological kind If you are a new user at distance detectors we suggest to read and follow the whole manual to feel the sense of your detector It is also necessary to practice at home with a simple television If you are an expert user of distance metal detectors go directly to the last part of the manual with the questions and answers that analyze the capabilities of the device Whatever your knowledge on detec tion is though the more experienced you become at the usage of this device the more suc cessful results you ll have If you are a new user at treasure hunting with distance detectors keep in mind that if there are no old buried objects where you re searching it won t matter how good your detector is or
12. of their width Thus the initial setting of these potentiometers is relative and depends exclusively on the purity and morphology of each specific area If you use your device slowly and methodically in an area where you have some target suspi cion the reality is one very hard not to detect your target if it really exists Remember you must always search slowly and methodically the area of your research The scanning is done from left to right or reverse horizontally at an angle opening of 180 degrees and with a speed of counting in your head from 101 to 110 from far left to far right or reverse Any failure of confirming the existence or not of a target burdens the user and not the device Your device always detects the real target your research hurry though can easily lead you to failure and false results If any of the Low bat leds turns on you still have 15 minutes of research to replace the bat teries and have no reliability problem of your device Always make sure that the device is turned off after the research For long periods of storage we recommend the removal of all the batteries from the device CAPABILITIES OF YOUR DEVICE FAQ You don t have a magic device that can do everything but a real one that has the maxi mum detection limits and capabilities always under appropriate conditions Here we ll analyze all these parameters for you to have a full image of the capabilities of your device and of the facts y
13. on of this knob is approximately the same with the corresponding button that the pulse detectors have Its ideal position lies within the yellow zone If you cannot position it in this zone adjust the regulate trimmer see below Setup knob The most important knob You adjust this only once and do not use it again afterwards Remember that if you move to an area further than 100km from the initial adjust ment place you then must re adjust it Regulate trimmer To the left of the Led target lock there is a hole where you can see a trimmer The user can increase the gain with a small screwdriver at his will It requires great attention NEVER MAKE FREQUENT ADJUSTMENTS DANGER OF DESTRUCTION OF THE TRIMMER Leave it at the default position or adjust at your will once Low bat Leds To the Power s right there are two Leds One with 18V and one with 9V These two leds are used for detection of battery drop When one of these turns on we must change our batteries see battery placement Target lock led Just beneath the buzzer there is the lock Led This cooperates with the buzzer but of course with a faster reaction Its usefulness is You can center exactly the target or even better use the function to detect very quick signals All kinds of speakers are incapable of reproducing a very quick signal due to their mechanical structure In this case the LED is irreplaceable It reproduces very quick signals
14. ou can use to your advantage for the most effective use All these observations have been certified by research It would be good to inform us on any extra observation you might possibly certify for a possible improvement 1 Is there any season of the year that is considered best for detection No Throughout the year the detection phenomenon remains stable with minimal changes in its volume 2 Is the day or the night best for the research Are there maybe some hours with better performance No The day or the night does not play any role for the research Also although the impor tance of a specific best hour for each area is referred by many people we have concluded that the hour has no importance because the differentiation is minimal Just during the night the research distance doubles 3 Has the weather any particular importance during the research Yes it has We mentioned before that the season doesn t matter But the weather does We have the best results in good weather and dry earth There is a slight performance decline before and after rain But while it s raining there is a detection performance decline that touches 70 During storms with lightning at the research area we have zero detection capability There is a strange phenomenon the cloud to cloud and cloud to ground lightning absorbs the phenomenon that s created above the buried noble metals and thus the detection from your device is not possible Depending on
15. the duration of this severe cloud to ground light ning it is possible for the detection area to remain dead for more than a week On wet ground on mud and near streaming water it is not good to perform any research We may catch the target but we are not sure about the zero spot because of the radiation scattering caused by water 4 What is the maximum depth we can have The device literally detects the phenomenon created on the earth surface from the object itself so it is completely normal that it is able to detect objects near 3 meters depth If you get a specific signal at a specific spot regardless whether the metal detector detects anything you are obliged to dig In this case the object is at a depth over the limit of the metal detector 5 Can the device detect other metals apart from gold Yes It has the most sensitivity for gold If there is a quantity of silver or copper though their mass can be easily detected The device has always the tension to firstly lock on gold then on silver and last on copper It is absolutely normal that it can t make any difference between 1kg of gold and 10kg of silver or copper in the same area Simply with the experi ence you ll gain in using the device you ll be able to interpret the different duration of the sound signal and understand what it really is The fact is that it cannot detect old ferromag netic materials but only noble metals At these it gives a sound signal on
16. wdriver Your OBMD 2 has now as a default setting the regulate trimmer inside hole left position led target at the full anticlockwise point Turn on the TV Put the OBMD 2 at a distance of 3 meters from the TV vertically on a table and towards the tv and turn the main power switch on Gain knob Turn the DC offset knob at Setup position and the Setup knob at the Setup point Now turn full clockwise the Gain knob With a small screwdriver on the hole panel turn very slowly clockwise the regulate trimmer At one point it will start beeps with pulses At another point the pulses stop and you have consecutive beeps without interruptions Stop there and turn anticlockwise the Gain knob If the beep stops with maximum 2 lines anticlockwise of the Gain knob you are ready If not turn clockwise the setup knob Ata point you have beeps Then try again with the gain knob to stop the beeps same procedure If moving anticlockwise the gain knob only two lines and the beeps stop you are ready Remember the best position for DC offest knob and setup knob are within the yellow zone FAMILIARIZATION TEST WITH THE DEVICE AT HOME For the tests a turned on CRT television the old ones with the glass screen if you haven t got LCD TV your device and a free space of at least 3 meters between you and the televi sion are required Don t touch the DC offset knob or Setup knob Go far away from the television which is on and
17. wever for this detection to be possible the simultaneous use of low frequency electromagnetic transmission with high duty cycle and AM modulation is required so that the receiver can read phenomenons that incure in the area of nanometres at a frequency easier detectable At the Crypton OBMD 2 the interest is only in the direct conversion of the received energy into DC voltage and in the height of this voltage which can be used for determination of the original energy For this to be possible the sensor must be in standard position and with a lens see back side of OBMD 2 of a special material This is the main reason why in Crypton OBMD 2 the use of a plastic or synthetic material box is not possible Unfortunately the IR sensor is sensitive to static fields created by plastic surfaces that surround it This forces us to use materials that unfortunately raise the production cost This sensitivity specificity to static fields created by plastic surfaces led us to use a box only of wood without metallic screws hermetically closed resulting in the increase of the cost and the calibration time of the device Also another great advantage of the wood is the temperature stability inside the device which makes its function reliable in extreme high or low temperatures Your device is very sensitive It is capable of detecting Au Ag Cu buried more than 40 years and at a depth until 7 meters maximum The maximum detection distance depends only
18. ze yourself with the detection distances from the television and the setting point of the Gain and the DC Offset Also famil iarize yourself with the setting of the Gain knob to reduce the interferences without reduction of the detection distance of the turned on television Nothing is critical but it learns you how to face the network and the transformers the only interference enemy for your device WAY OF USING YOUR DEVICE Far enough from your research point and with the device looking straightforward set the Gain knob ON The correct function of the device is indicated with a quick beep Turn on slowly the Gain knob until you get a sound signal With the method of leaving and touching the Gain knob with your hand you make sure the correct limit setting If it hasn t been set correctly repeat with little settings of the DC offset For all these settings the device must look forward towards the horizon parallel to the ground and never towards the detection area Perform a slow rotation around yourself If you get a signal turn the DC offset a little bit to the left and perform the rotation again After you ve made sure the functioning stability of your device without any signal set off towards the detection area while scanning very slowly the area from left to right or reverse If you get any signal search the spot slowly from all directions for confirmation of a real target You don t need to scan with your device left and
Download Pdf Manuals
Related Search