ELARA 200x110 cm - SpatiulConstruit.ro
Contents
1. min 400x400 mm x R2 Airing and access window min 250x250 mm Aqua Soft IMPORTANT is necessary e The cable connection of the hyrdomassage bathtubs should be applied as shown in the Figure e Check whether the yellow green earth cables bound with the metal parts e For the electrical connection of the hydromassage bathtubs earth connection BROWN PHASE BLUE YELLOW GREEN NEUTRAL 220V croun placed under the hydromassage N me bathtubs are connected to all legs Pump Dis Disinfection Tank Lid Electronic Control Panel lt lt Air Jets 7 Transformer co Waste Blw Blower Water Jets CB Control Button Micro Water Jets A Air Controller y Underwater Light PB Push Button Water Suction Filter VitrA Bathtubs Co Cumhuriyet Mah 13 Sok No 10 Sekerpinar 41400 Gebze Kocaeli Turkey VitrA Bathtubs Co always keeps the rights to make any changes on the product July 2008 Tel 90 262 648 95 00 pbx Fax 90 262 658 85 94 E mail vitrabathtubs export eczacibasi com tr www vitrakuvet com tr eC Eczacibasi2. ELARA 200x110 cm Size cm Height cm Weight kg Front Panel Weight kg Side Panel Weight kg Volume It Available massage systems 200x110 58 32 6 4 340 Duo Maxi Duo Soft Aqua Maxi Aqua Soft Aqua Soft Easy 1100 Plan 1100 2000 575 535 435 Side View Front View if e As shown in Figure Plan the wall hangers details A B are used to fix the product to the wall It is suggested to use the wall hangers to rigid the bathtub Detail A Detail B Points to Notice e Elara is a symmetrical model The siphone hole and siphone controlling handle are in the middle Therefore it is convenient for double ended usage e An elbow and a waste connection hose of 50 mm will be delivered with the product but an edge lath and other accessories are not included e The place where the product will be installed should be straight e An airing and access window should be left if the hydromassage bathtub is installed without panels e During the installation of the panels the adjustment of the leg set should be carried out according to the height of the panel e The electronical system is running with 220 volt with earth connection For its connection a 3x2 5 mm cable should be used e The product should be protected with an appropriate ampere fuse for Duo Maxi System 20 ampere for Duo Soft System 16 ampere for Aqua Maxi and Aqua Soft Sy
3. stems 10 ampere and the amper fuse should be closed when it is not used e It is requested just to use wall taps with this product e The spout should be min 17 cm if the faucets are installed to the wall e Handgrip application for this product is not available e For the cleaning of the acrylic bathtub look at the User Manual e Waste connection fuse wall hangers and User Manual are delivered with the product Faucet Applications ANY APPLICATION OF TABS ON THIS BATHTUB IS NOT POSSIBLE The area where the waste outlet 50 mm can be placed in Ideal position of the waste outlet 50 mm The end point of the waste outlet should not be cut out and should be left at least 50 mm above the surface The area 200 mm where the waste outlet should not be left Hot amp cold water inlet for the wall taps Measures for electrical connection of whirlpool tubs There is no need to leave additional space for the silicone during the installation process It is enough to prepare the required area according to the size of the product Perspective Massage Systems Duo Maxi Duo Soft Aqua Maxi Aqua Soft Easy If the bathtub is used without panels the following airing and access windows should be applied R1 Access window min 400x400 mm R1 Airing and access window min 400x400 mm R2 Access window
Download Pdf Manuals
Related Search