Master Generator
Contents
1. 4 2 3 4 Outputs eae Supply 10 30 VDC AC monit input T Fs BFs Al B A V RS 485 Out 10 265 VAC V V S in V Radio Contr Clock 0 1 A 30 V ci 12 VA G 3800 0016 800 Specifications are subject to change without notice 30 06 03 Dupline is a registered trademark A product of the CARLO GAVAZZI Group Gross Automation 877 268 3700 www carlogavazzisales com sales grossautomation com G 3800 0016 G 3800 1016 Mode of Operation Intelligent functions The G38890x016 Master Genera tor is a programmable channel generator which is particularly well suited for building automa tion applications due to the dedi cated intelligent functions for lighting control rollerblind con trol temperature control and alarm monitoring In addition to that the unit can be configured to perform real time logic and timer functions The windows based configuration software is extremely easy to use due to the pre programmed functions Master Generator configuration The Master Generator is as default configured to operate as a standard channel generator without intelligent functions In order to make use of the intelli gent functions the Master Gen erator must be configured by means of the user friendly win dows based configuration soft ware This is included in the package and has to be installed on a Win 95 98 2000 NT XP PC When the configur2. is a registered trademark A product of the CARLO GAVAZZI Group Gross Automation 877 268 3700 www carlogavazzisales com sales grossautomation com
3. Input gt 4 kVAC rms Supply Com ports gt 4 kVAC rms Heat dissipation 4 W Power supply DC Types Rated operational voltage Overvoltage cat Ill IEC 60664 through term 21 amp 22 10 to 30 VDC Reverse polarity protection Yes Rated operational power 6 W Power dissipation G38000016 lt 6W G38001016 lt 7W Inrush current 1A Rated impulse withstand volt 800 V Dielectric voltage Supply Dupline 500 V Supply Output 200 V Wiring Diagrams DUPLINE D 2 Real time clock Accuracy Internal back up time Power ON delay Indication for Supply ON ON Line COM 1 COM 2 RS 485 GSM Environment Degree of protection Pollution degree Operating temperature Storage temperature Humidity non condensing Mechanical resistance Shock Vibration Dimensions Material see Technical Information Weight Better than 1 minute month Typ 48 hours lt 2 58 LED green LED yellow LED red LED red LED red LED red IP 20 3 IEC 60664 0 to 50 C 32 to 122 F 20 to 85 C 4 to 185 F 20 to 80 RH 15 G 11 ms 2 G 6 to 55 Hz H8 housing 640 g G 3800 0016 230 4 IN v 1 a Oele lels erse ponpes pase 1 2 r Inputs 2 3 4 Outputs a po DUPLINE t P t ERESERESEAEAESA T Fs BFs Al B A V RS485 Out 1 2 3 Inputs Tl 6 30VDC yw v V V S in V Radio Contr Clock IN y f 8 9 10 19 12 13 14 15 16
4. up to 4096 data points If desired it is also possible to use Ethernet instead of RS485 In that case each Master Generator must be Specifications are subject to change without notice 30 06 03 Dupline is a registered trademark A product of the CARLO GAVAZZI Group equipped with a converter A Modbus Device Address needs to be assigned to each Master Generator during configuration In a network with automatic data exchange one Master Generator is configured as RS485 Master and will thus synchronize a con tinual automatic data exchange between all the Master Genera tors When programming the individual Controllers it is then possible to make references to signals in other Dupline net works For example the wind speed value measured by a sen sor in one Dupline network can be used in the roller blind control function in the other Dupline net works It is also possible to make e g all lights OFF func tions for a big building by acti vating a single pushbutton A PC or PLC connected to one of the COM ports of the G38800X016 operating as RS485 Master gets access to all 4096 data points using the Modbus protocol Also using the PC makes it pos sible to change the configuration in any of the Master Generators in the network In a network without automatic data exchange a PC or PLC need to be RS485 Master and all the Master Generators will oper ate as Modbus RTU slaves This makes it possible for the PC or PLC t
5. Master Channel Types G 3800 0016 G 3800 1016 Product Description Programmable channel gene rator with built in dedicated intelligent functions for light and roller blind control alarm monitoring and analog set point control In addition to that there is realtime timer and logic functions Pro gramming is easily performed through Windows based con figuration software An optional built in GSM modem can be used for monitoring and control of Dupline signals via SMS Up to 32 Master generators can be networked Input Output Speci Generator as slaves in a RS485 network using the Modbus protocol The unit has 4 digital inputs and 4 digital outputs on board and it is possible to create links to other Dupline networks via external Radio Modem The G3800X016 is different from the G3800X015 in that it has the capability to perform automatic data exchange with up to 32 other G3800X016 s in a RS485 net work enabling up to 4096 I O points in one system fications Dupline e Programmable channel generator e Automatic data exchange between multiple networked Master Generators allowing systems with up to 4096 I O points e Option for built in GSM Modem for monitoring and control via SMS e User friendly configuration via Windows 98 2000 NT XP software e Real time timer and logic functions e Analog set point control and monitoring e Light and Rollerblind control functions e Alarm Monitoring e Option f
6. annels Digital outputs 38 6 ms 132 3 ms 4 PNP transistors Function Programmable Output voltage Vo lt 35 VDC Output current lt 100 mA Output voltage drop lt 2V Off state leakage current lt 100 pA Short circuit protection None Built in protective diodes None Dielectric voltage Output Dupline gt 4 KVAC rms Output Input 200 V Inductive loads External noise suppression required Inputs Digital 6 30 VDC Voltage ON 55V OFF lt 15V Current lt 6 mA Dielectric voltage Input Dupline gt 4 kVAC GSM Modem Siemens cellular engine TC35 Dual Band EGSM900 and GSM1800 Output power Class 4 2 W EGSM900 Class 1 1 W GSM1800 Antenna connector FME V and GND may be used as supply for digital I O s if RS 485 is not used Gross Automation 877 268 3700 www carlogavazzisales com sales grossautomation com G 3800 0016 G 3800 1016 Supply Specifications Du General Specifications Power supply AC Types Rated operational voltage through term 21 amp 24 jumper term 22 amp 23 through term 21 amp 23 jumper term 24 amp 22 Frequency Overvoltage cat Ill IEC 60664 230 VAC 15 IEC 60038 115 VAC 15 IEC 60038 45 to 65 Hz Rated operational power Typ 7 VA 3 W Power dissipation G38000016 lt 6W G38001016 lt 7W Rated impulse withstand voltage 230V 4kV 115V 2 5 kV Dielectric voltage Supply Dupline gt 4 kVAC rms Supply Output gt 4 kVAC rms Supply
7. ation is com pleted the configuration is down loaded into the Master Genera tor via COM1 RS232 port The configuration can be saved on a file and it is also possible to upload the configuration from a Master Generator GSM Modem Option The G38001016 Master Genera tor has a built in GSM Modem which enables monitoring and control of Dupline signals via SMS messages to from mobile GSM telephones There are 3 different ways to use SMS mes saging e The Master Generator can be programmed to send out event based SMS messages The event can be a channel switch ing ON or OFF or it can be an analog signal crossing a set point e Requests for status of digital or analog data can be sent and answered via SMS messages e Status of digital channels can be controlled by sending com mands via SMS messages In order to make use of the GSM modem the following is required e A SIM card with the pin code 9090 needs to be inserted into the slot in the front of G38001016 The SIM card must be a 3V type e A GSM antenna needs to be connected to the FME connector on 38001016 If the unit is installed in a metal enclosure the antenna must be installed outside the enclosure and con nected to the Master Generator via a cable an antenna of this type is available as accessory An LED in the front of G38001016 indicates the status of the GSM modem By emitting different blink patterns the LED indicates connecting SIM ca
8. enerator has a built in driver for control of an external Radio Modem which can be used to create wireless links where no cable is available in parts of an installation One Master Generator must be defined as the central MGEN and up to 32 Master Generators can be defined as remote MGEN s The central MGEN is continuously polling and updat ing the Dupline data from all remote MGEN s via the radio modem network and in this way it makes the entire system oper ate as one big Dupline network Apart from increased reaction time depending on the number of remote MGEN s the system will operate as if it was one Mas ter Generator connected to all the I O modules with cable The Master Generator supports the Radio Modem type 2ASxE and all 3AS types from the Finnish manufacturer SATEL www satel fi Find below an application dia gram for the Radio Modem option Note Analink modules cannot be used with Radio Modems On board I O The Master Generator has 4 dig ital inputs and 4 digital outputs on board These have been implemented to reduce the cost of remote stations with only a few signals e g in connection with an SMS alarm system or radio modem remote stations The onboard I O s are used via the logic functions of the Master Generator where they can be assigned to specific channel addresses Gross Automation 877 268 3700 www carlogavazzisales com sales grossautomation com G 3800 0016 G 3800 1016 P
9. in Assignment COM1 COM2 Without automatic data exchange PC SS Seas ES EA SS a Q ASC RKA SED CE Rae nares EES cS 5 Modbus RS485 gt With automatic data exchange PC Modbus RS232 Coe SS CO Der O RS soe os EEE A LAIS _ Modbus RS485 gt line pine D RS 232 Cable 9 pin male to controller 9 pin female 9 pin male 15 pin female to controller to radio modem 2 O _ ST 3 O T1009 5 OO O07 Dupline 1 I O modules e Digital e Analogue e Counter Dupline 2 A ee ee I O modules e Digital e Analogue e Counter MGEN Master 32 l Dupline 2 Specifications are subject to change without notice 30 06 03 Dupline is a registered trademark A product of the CARLO GAVAZZI Group Gross Automation 877 268 3700 www carlogavazzisales com sales grossautomation com G 3800 0016 G 3800 1016 D li pune D Radio Modem Application Scope of Supply 1 x Master Channel Generator G 3800 x016 xxx 1 x User manual MAN G 3800 0016 ENG 2 JJ 1 x RS 232 cable RS 232 9 M 9 F Central MGEN 1 x Configuration software SW G 38xx16 ti Accessories Remote MGEN 1 E fn Dupline Data Access Software DUPDATACC e GSM Antenna 900 MHz ANT1 Antenna for Radio controlled clock ANT2 Remote MGEN 2 RS232 mi mh Specifications are subject to change without notice 30 06 03 5 Dupline
10. o read write data from any of the 32 Master Generators See following RS485 networking diagram for both operating modes Modbus RTU protocol Using the Modbus RTU com mands 2 and 3 through COM1 COM2 or RS485 makes it possi ble to read any type of Dupline data digital analink multiplexed analog or counter data The sta tus of digital and multiplexed analog data and reset of counter can be controlled via the com mands 5 6 and 16 See manual for memory map information Software The Dupline Data Access soft ware package type no DUP DATACC has been developed specifically for the Master Gen erator It contains two software tools that provide easy access from a PC to Dupline digital analog and counter data via one of the RS232 or RS485 ports The DDE driver provides a Dynamic Data Exchange inter face which can be used from applications that support client side DDE such as Microsoft EXCEL Getting Dupline data into an EXCEL spreadsheet is a simple copy and paste opera tion The Dupline ActiveX driver provides an ActiveX interface which is a Microsoft standard for communication between two products The Dupline Activex driver can be used from any development tool that supports client side ActiveX such as Microsoft Visual Basic Delphi and Borland C builder The Dupline Data Access pack age can be used on single Mas ter Generators as well as Master Generator networks Radio Modem driver The Master G
11. or Radio controlled clock for high real time accuracy e 2 x RS232 ports for configuration and Dupline data read write e 1 x RS485 port for networking of up to 32 Master Generators e Modbus RTU protocol e Built in software driver for external radio modem e 4 digital inputs 4 digital outputs on board e H8 housing for DIN rail mounting EN50022 e AC or DC power supply Ordering Key G 3800 1016 230 Type Dupline oO H8 housing GSM phone _ Master channel generator Supply Type Selection Supply Ordering no Ordering no w GSM telephone 115 230 VAC G 3800 0016 230 G 3800 1016 230 10 30 VDC G 3800 0016 800 G 3800 1016 800 Serial Port COM 1 COM 2 Data format COM 1 COM 2 Pin assignment TxD RxD GND Dielectric voltage Com port Dupline Protocol RS 485 Termination Fs B Fs A B A GND V Protocol Dupline Output Output voltage Current Short circuit protection RS 232 115 kBaud 9600 Baud adjustable 8 bit No parity 1 stop bit 9 pole female SUB D Pin 2 Pin 3 Pin 5 gt 2 kVAC rms Modbus RTU Pin 27 When in use connect to pin 31 Pin 28 When in use connect to pin 30 Pin 29 When in use connect to pin 31 Pin 30 Pin 31 Pin 32 Pin 33 Modbus RTU Dupline carrier 8 2 V lt 130 mA Yes Specifications are subject to change without notice 30 06 03 Dupline is a registered trademark A product of the CARLO GAVAZZI Group Sequence time 32 channels 128 ch
12. rd missing No network found No response from modem SMS sent and SMS received Radio Controlled Clock Option It is possible to equip the G3800x016 with an external antenna for radio controlled clock in order to achieve high timing accuracy in connection with real time functions and event time stamps When the antenna ANT2 is used the G3800x016 will receive accurate timing signals from the DCF77 transmitter located in Frankfurt a M Germany The antenna out puts the demodulated signals to the Master Generator via an open collector driver The DCF77 transmitter covers all of Central Europe since the transmission radius is at least 1000 km For longer distance the use of ANT2 depends on receiv er conditions ANT2 connects to the G3800x016 terminals RS232 ports The Master Generator is provid ed with two RS232 ports COM1 and COM2 which both can be used by PC s PLC s for read write of Dupline data using the Modbus RTU protocol COM1 is also used for download and upload of configuration files created by the Master Genera tor configuration software and for firmware upgrades If the option for an external radio modem is desired it needs to be connected to COM2 COM1 has a fixed baudrate of 115 kBaud while the baudrate of COM2 is adjustable RS485 port The RS485 port enables net working of up to 32 Master Gene rators with or without automatic data exchange This enables control and monitoring of
Download Pdf Manuals
Related Search