Home

GPS Personal Tracker

1. B R aatto e mare LOSES Exren a i RENER Bro marici nias Eteone PRD 3 2 The operation based on the GPRS application In this mode PTOI can be stored three preset telephone numbers 1 2 and 3 a 4 digit user password a group of TCP IP server IP address and port number 4 digit GPS password and access point name of GPRS The related configuration content that users set by SMS order is non volatile After the success the state has not affect by switching power until once again receives the relevant instructions or reset operation to change Add PT01 to 800D web based tracking software 1 Change the telephone number in advance instructions Format new numbers with 4 20 figures user password 4 figures location number 1 3 eg 13900000000 0000 1 Explanation You can store 3 telephone numbers at most in advance When PTOI tracker receives the instruction and confirms the user password correctly substitutes the new number for the existing number After success it will send the confirmation messages SET USER NUMBER 1 3 OK to the sender 2 Switch the mode instruction Format 710 user password 4 figures eg 7100000 Explanation When PTO1 tracker receives the SMS and confirms the user password correctly it switches to the GPRS application mode After the success it will send the confirmation messages Page 21 of 35 PT01 USER MANUAL SET MODE OK CURRENT MODE GPRS to the sender 3
2. Note The user password is 0000 after factory set or reset 3 2 3 Change the telephone number in advance instructions Format new numbers with 4 20 figures user password 4 figures location number 1 3 eg 13900000000 0000 1 Explanation You can store 3 telephone numbers at most in advance When PTO1 tracker receives the instruction and confirms the user password correctly substitutes the new number for the existing number After success it will send the confirmation messages SET USER NUMBER 1 3 OK to the sender Note Preset number is none after factory set or reset 3 2 4 GPS state setting instruction GPS will enable on the on off adaptive three work states by send text messages command GPS state is open after factory settings or reset 3 2 4 1 Open the GPS instruction Format 222 user password 4 figures eg 2220000 Page 25 of 35 PT01 USER MANUAL Explanation When PTO1 tracker receives the instruction and confirms the user password correctly opens the GPS power After the success it will send the confirmation messages GPS ON OK to the sender 3 2 4 2 Close GPS instruction Format 333 user password 4 figures eg 3330000 Explanation When PTO1 tracker receives the instruction and confirms the user password correctly close the GPS After the success it will send the confirmation messages GPS OFF OK to the sender 3 2 4 3 Adaptive GPS instruction Power saving Function Format
3. 100 user password 4 figures eg 1000000 Explanation When PTO1 tracker receives the instruction and confirms the user password correctly it will close the GPS immediately and send the confirmation messages VIBRATION SENSOR ON OK to the sender The tracker built in vibration sensor once monitors the track movement for change to open the GPS If in 5 minutes with not monitors the track changed in the movement to close GPS Note When using this function as far as possible put the tracker in the vibration sensitive areas such as the car at the front or rear If a long time on the highway or the flat road the GPS may be in sleeping and will not be awakened Users can send 222 user passwords to re open the GPS 3 2 5 Single localization request instruction Format 666 user password 4 figures eg 6660000 Explanation When PTO1 tracker receives the instruction and confirms the user password correctly reads the GPS information No matter whether effective the information with the replying base station which is the set of the original software will be sent to the sender Data format Page 26 of 35 PT01 USER MANUAL Lat Latitude Direction Latitude Value Accuracy for 5 after the decimal point Long Longitude Direction Longitude Value Accuracy for 5 after the decimal point Speed Speed KM H Accuracy for 2 after the decimal point Direction Direction Accuracy for 2 after the decimal point Date Date YY Y Y M
4. 22 enra Seet LJ bt 22 DAt paot O 3 2 eenite sorset Tes Set 22 3 eae 14 Stet BIE EGF 116 6 id INDAH sS EI an re wns tee orre Note pay attention to change the position date format Or you can start the internet explorer and copy http maps google com to connect to Google map website for displaying the location map 3 You can get the latitude amp longitude date by sending 666 password SMS command code to the GPS tracker PTO1 Input the latitude and longitude that you receive from SMS and click on search button the Google earth will display the location map for you eg You receive the information from the tracker As follows Lat 22 50500 Long 114 01000 Speed 0 00KM H Direction 315 00 Date 2008 04 25 Time 16 39 45 BS 25ee0dff Fix A ID 353686009002030 STATE SMS Page 19 of 35 PT01 USER MANUAL Search the position on the Google map in relevant position input 22 50500 114 01000 Obtain the following picture Or you can use local map software on PDA or car navigation device input the position date Note pay attention to change the position date format Page 20 of 35 PT01 USER MANUAL ane ited Kahres as A CEER ee n ni ce SEMA T a F azae S nET eRe AEG wire pi ks nia Be narena Ma exire a Peer Li ino enue ERaeR F W h zki M a ROSNO EKSi k Pan oga annasan Eur a7 e ars 1 E gt GP wee IFE erlea l ate STA
5. Data format Lat Latitude Direction Latitude Value Accuracy for 5 after the decimal point Long Longitude Direction Longitude Value Accuracy for 5 after the decimal point Speed Speed KM H Accuracy for 2 after the decimal point Direction Direction Accuracy for 2 after the decimal point Date Date YY Y Y MM DD Time Time HH MM SS GMT BS Base Station information Fix Location state A V ID IMEI STATE Message state Effective data format Lat 22 50500 Long 114 01000 Speed 0 00KM H Direction 315 00 Date 2008 04 25 Time 16 39 45 BS 25ee0dff Page 13 of 35 PT01 USER MANUAL ID 353686009002030 STATE SMS Invalid data format Lat 22 50500 Long 114 01000 Speed 0 00KM H Direction 315 00 Date 2008 04 25 Time 16 39 45 BS 25ee0dff Fix V ID 353686009002030 STATE SMS Note If in the cold start and GPS no position it will return to the void of information ERROR GPS GPRMC FRAME DATA BS 27971054 3 1 6 Send the positional information in fixed time instruction Format 4 xx user password 4 figures eg 4010000 Explanation x indicates one figure from 0 to 9 while xx lt 60 its unit is minute while xx gt 60 its numerical value is xx minus 60 and unit is hour in other words 61 is 1 hour 62 is 2 hours followed by analogy When PTOI tracker receives the instruction and confirms the user password correctly it establishes the current time for initial ti
6. better GPS signal 2 the front side of PTO1 should be placed toward sky Reset Under the shutdown state press the SOS button and the power key keep the two keys being held down to 6s then release again List of reset state Configuration State Working Mode Unchanged Pre set phone numbers None User passwords 0000 GPS Open Send regularly location information Off The number of return to base stations l Calling switch Open Monitoring function off Electronic fence close Service center number XX GPRS services password 0000 Page 10 of 35 PT01 USER MANUAL GPRS user name V300Q APN CMNET IP address 0 0 0 0 0000 GPRS data upload close 3 How to 3 1 The operation based on the SMS application In this mode PTO1 can be stored three preset telephone numbers 1 2 and 3 and a 4 digit user password The related configuration content that users set by SMS order is non volatile After the success the state has not affect by switching power until once again receives the relevant instructions or reset operation to change 3 1 1 Switch the mode instruction Format 700 user password 4 figures eg 7000000 Explanation When PTO1 tracker receives the SMS and confirms the user password correctly it switches to the SMS application mode After the success it will send the confirmation messages SET MODE OK CURRENT MODE SMS P2P to the sender 3 1 2 Set up
7. operation based on the SMS application 3 1 1 Switch the mode instruction 3 1 2 Set up the user password instruction 3 1 3Change the telephone number in advance instructions 3 1 4 GPS state setting instruction 3 1 4 1 Open the GPS instruction 3 1 4 2 Close GPS instruction 3 1 4 3 Adaptive GPS instruction Power saving Function 3 1 5 Single localization request instruction 3 1 6 Send the positional information in fixed time instruction 3 1 7 Telephone localization function 3 1 8 Answer or hang up function 3 1 9 Seeking help initiatively 3 1 10 Monitor function Handset silent switch Page 3 of 35 PT01 USER MANUAL 3 1 11 Calling switch instruction 3 1 12 Electronic fence function 3 1 13 Low voltage warning 3 1 14 Display location on map 3 2 The operation based on the GPRS application 3 2 1 Switch the mode instruction 3 2 2 Set up the user password instruction 3 2 3 Change the telephone number in advance instructions 3 2 4 GPS state setting instruction 3 2 4 1 Open the GPS instruction 3 2 4 2 Close GPS instruction 3 2 4 3 Adaptive GPS instruction Power saving Function 3 2 5 Single localization request instruction 3 2 6 Change the user name 3 2 7 Change the service password 3 2 8 Set up the access point name of GPRS 3 2 9 Set up the TCP IP server and IP s address and port number 3 2 10 Upload the location instruction at once 3 2 11 Upload data settings 3 2 12 Calling switch instruction 3 2 13 Upload the call 3 2 14 Answer or hang
8. product should meet greater than equal 60 that is T N gt 60 When setting parameters T N lt 60 the device will automatically correct sampling interval T to meet the uploading constraints When PTO1 tracker receives the instruction and confirms the user password correctly sends the confirmation messages to the sender The content is SET GPS SAMPLING TIME AND QUANTITY OK At the same time as specified in the instructions to the sampling interval time T continuous read the GPS data and preserve to the memory block When the memory block reaches to the number of upload each time N setting it starts connecting to the GPRS servers to send out the format as 3 2 10 information and the state item automatically updates STATE AUTO When the number of upload each time N 0 it will close the upload data setting and send the confirmation messages to the sender The content is GPRS TIMER STOP Note The upload data setting is 0 0 after factory set or reset 3 2 12 Calling switch instruction Calling OFF format 150 user password 4 figures eg 1500000 Calling ON format 151 user password 4 figures eg 1510000 Explanation When TLT 1B tracker receives the instruction to close calling and confirms the user password correctly close the calling function including the SOS alarm when across the fence after successfully sent the confirm information SET VOICE CALL OFF to the sender When TLT 1B receives instruction to o
9. the decimal point the following zero cannot bypass Ndd mmmm is latitude information with units of degrees and minutes and the dd expresses degree mm mmmm expresses minute Accuracy for 4 after the decimal point the following zero cannot bypass Rzzz z is radius for the domain 999 9 0 1 unit for KM When the tracker receives this instruction judges to be authorized users and confirms the user password correctly it will send the confirmation messages SET GEO FENCE OK to the sender Format2 004 user password E Wddd dddddN Sdd dddddRzzz z eg 0040000E114 10004N22 55705R999 9 Explanation E east longitude W west longitude N north latitude S south latitude In this example uses E and N please according to the actual geographical position choose corresponding coordinate form to set In the demonstration meanings of various parts are as follows Page 17 of 35 PT01 USER MANUAL Eddd ddddd is longitude information with units of degrees and the ddd ddddd expresses degree Accuracy for 5 after the decimal point the following zero cannot bypass Ndd ddddd is latitude information with units of degrees and the ddd ddddd expresses degree Accuracy for 5 after the decimal point the following zero cannot bypass Rzzz z is radius for the domain 999 9 0 1 unit for KM When the tracker receives this instruction judges to be authorized users and confirms the user password correctly it will send the confirmation message
10. this feature once the PTO1 beyond the scope of the set fence it will send location information as to 3 1 5 to the 3 preset numbers The information state item automatically updates STATE OS At the same time call the first user telephone number If it is unsuccessful closed or unable to connect or no response makes vibration and starts calling the Page 16 of 35 PT01 USER MANUAL second and the third in turn When the PTOI re enters the fenced area it will immediately send location information format 3 1 5 to the three preset numbers The information state item prompts STATE RS At the same time call the first user telephone number If it is unsuccessful closed or unable to connect or no response makes vibration and starts calling the second and the third in turn 1 Set the scope of the fence According to the input formats different of coordinates user can choose the format as follows instructions to operate Formatl 003 user password E Wdddmm mmmmN Sdd mmmmRzzz z eg 003xxxxE11406 0024N2233 4230RI1 Explanation E east longitude W west longitude N north latitude S south latitude In this example uses E and N please according to the actual geographical position choose corresponding coordinate form to set In the demonstration meanings of various parts are as follows Edddmm mmmm is longitude information with units of degrees and minutes and the ddd expresses degree mm mmmm expresses minute Accuracy for4 after
11. tracing function or switch GPS e Support establishes three telephone numbers SOS button send out exact location for immediate rescue action e One key for easily use Page 5 of 35 PT01 USER MANUAL e The major technological index of the device is in conformity with the international standard of GSM mobile phone e Portable compact size low power design Applications e Handheld portable products e Monitor and protect child elder disabled and can be used for physical distribution and inspect official occasions e Based on GSM network and INTERNET this series of products provide personalized services for companies organizations and individuals Specification Hardware cs i ep oe leer ata GPS Chipset SIRF Star III chipset GPS Sensitivity 159dBm GPS Frequency L1 1575 42MHz C A Code 1 023MHz chip rate Channels 20 channel all in view tracking Position Accuracy 10 meters 2D RMS Velocity Accuracy 0 1 m s Time Accuracy 1 us synchronized to GPS time Datum WGS 84 Reacquisition 0 1 sec average Hot start 1 sec average Warm start 38sec average Cold start 42sec average Altitude Limit 18 000 meters 60 000feet max Velocity Limit 515 meters second 1000knots max Page 6 of 35 PT01 USER MANUAL Acceleration Limit Less than 4g Jerk Limit 20m sec Operating temperature 20 to 70 C Humidity 5 to 95 Non condensing
12. upload data is Y the area is 1 50 when the unit receive this command and confirm the password is correct the unit will send message to the sender which is GPRS REPORT SAMPLING 2 OK And also the unit will read the GPRMC of the NEMA of the unit and then save it in memory When the data is ok then will connect with the server and send it out If the data can t send it because of the internet or other reasons the data will save automatically then send it out when the internet is ok The format is like 4 2 10 the state is AUTOLOW When set the number of upload Y is 0 so it s will close this function then send message which is GPRS REPORT SAMPLING 2 STOP 7 Please go to http 119 146 223 203 Enter the user name and password we provided After log in please go to Vehicle Manager Vehicle List E User Manager i_ Vehicle Manager Help Center 24 Terminal oes eee Vehicle List f Report Center License plate Terminal ID Terminal Sim card Please click Add button you will see the below window Page 23 of 35 PT01 USER MANUAL T Add vehicle License plate Terminal Type TE1 Na Sim card Terminal ID Owner Name Telephone Address Remark T 8 8 op w Submit Close License Plate Define by yourself you can enter A Z number or Numeric Terminal Type Choose Any one SIM card the SIM card phone number you put in PTO1 Terminal ID On the packing box of P
13. user password Open handset in two modes 003 user password E Wdddmm mmmm Set the scope of the fence units of degrees and N Sddmm mmmmRzzz z minutes in two modes 004 user password Set the scope of the fence units of degrees in E Wddd dddddN Sdd dddddRzzz z two modes 100 user password Open power saving function in two modes 150 user password Close calling instruction in two modes 151 user password Open calling instruction in two modes 211 user password Open the electronic fence in two modes 210 user password Close the electronic fence in two modes 222 user password Open GPS In two modes Page 34 of 35 PT01 USER MANUAL 333 user password Close GPS In two modes 4xx user password Regularly upload in SMS mode 666 user password Return single localization to user number in two modes 777 new password old password Change user password in two modes new numbers user password location number 80 1 user password new user name 802 user password new service password old service password 803 user password APN 803 user password APN APN user name APN password Change the telephone number in advance in two modes Change the user name in GPRS mode Change service password in GPRS mode Set up access GPRS points in GPRS mode Set up access GPRS points in GPRS mode 804 user password fixed IP address port Set up TCP IP server s IP add
14. Accuracy for4 after the decimal point the following zero cannot bypass Page 32 of 35 PT01 USER MANUAL Ndd mmmm is latitude information with units of degrees and minutes and the dd expresses degree mm mmmm expresses minute Accuracy for 4 after the decimal point the following zero cannot bypass Rzzz z is radius for the domain 999 9 0 1 unit for KM When the tracker receives this instruction judges to be authorized users and confirms the user password correctly it will send the confirmation messages SET GEO FENCE OK to the sender Format2 004 user password E Wddd dddddN Sdd dddddRzzz z eg 0040000E114 10004N22 55705R999 9 Explanation E east longitude W west longitude N north latitude S south latitude In this example uses E and N please according to the actual geographical position choose corresponding coordinate form to set In the demonstration meanings of various parts are as follows Eddd ddddd is longitude information with units of degrees and the ddd ddddd expresses degree Accuracy for 5 after the decimal point the following zero cannot bypass Ndd ddddd is latitude information with units of degrees and the ddd ddddd expresses degree Accuracy for 5 after the decimal point the following zero cannot bypass Rzzz z is radius for the domain 999 9 0 1 unit for KM When the tracker receives this instruction judges to be authorized users and confirms the user password correctly it will send th
15. Dimension 95mm 46mm 18mm Voltage Rechargeable 1300 mAh battery 3 7V Charging connector DC 5V 2 Getting started 2 1 Hardware description Blue LED indicate the GSM signal state State Means constant Lighting no SIM card or not GSM net flashlight once interval 8s GSM receiver work well and standby flash quickly voice calls or in GSM connection Red LED indicate charge sate State Means constant Lighting charging slow flashing charging was completed fast flashing low power Note If the battery is too low it is possible that at the beginning of in charge the red light will not light up Green LED indicate the GPS signal state State Means Page 7 of 35 PT01 USER MANUAL constant Lighting Working but no location Flashing Working and has located Power key GPS LED ae SOS Button GSM LED Power LED DU Jak Button Function description Button Means Press and hold 3 5s to turn on turn off Power Key Short press to hang up incoming calls Short press the keys can answer the incoming call press the key about 3 seconds the PTO1 will be vibration and send the location information to 3 user telephone numbers preserved in advance Or upload the positional information SOS Button through GPRS to the server at the same time call the first user telephone number If it is unsuccessful closed or unable to connect or no response mak
16. M DD Time Time HH MM SS GMT BS Base Station information Fix Location state A V ID IMEI STATE Message state Effective data format Lat 22 50500 Long 114 01000 Speed 0 00KM H Direction 315 00 Date 2008 04 25 Time 16 39 45 BS 25ee0dff Fix A ID 353686009002030 STATE SMS Invalid data format Lat 22 50500 Long 114 01000 Speed 0 00KM H Direction 315 00 Date 2008 04 25 Time 16 39 45 BS 25ee0dff Fix V Page 27 of 35 PT01 USER MANUAL ID 353686009002030 STATE SMS If in the cold start and GPS no position it will return to the void of information ERROR GPS GPRMC FRAME DATA BS 27971054 3 2 6 Change the user name Format 80 1 user password new user name eg 801 0000 username Explanation When PTO1 tracker receives the instruction and confirms the user password correctly changes the user name to the new user name After the success it will send the confirmation messages to the sender The content is CHANGE USERNAME OK Note The user name is V300Q after factory set or reset 3 2 7 Change the service password Format 802 user password new service password old service password eg 802 0000 1111 0000 Explanation When PTO1 tracker receives the instruction confirms the user password and old service password correctly changes the service password to the new service password After the success it will send the confirmation messages to the sen
17. PT01 USER MANUAL GPS Personal Tracker User Manual V5 2 PTO1 Page of 35 PT01 USER MANUAL Important Attention Dear Sir or Madam Thank you for choosing our company s tracker devices Due to the constantly updating and improvement in our products please attention that after you setting by phone SMS you still have to wait for more than 1 minute to cut off the power or PTO1 won t set up successful even responded to set up a successful confirmation text message 2 PTOI only responds to the instructions send by the user s restored phone number So the first step operation the user must be stored telephone number Detailed Command can be found from Page 21 3 2 3 Change the telephone number in advance instructions 3 PTOI can operate in SMS and GPRS modes in this two modes respectively have their own instruction set SMS mode the terminal only to respond to SMS mode instruction set GPRS mode the terminal only to respond to GPS mode instruction set During operation please note that the current mode of the terminal to send instructions and pre match In order to reduce errors hereby tips Page 2 of 35 PT01 USER MANUAL Content 1 Introduction 1 1 What s in the box 1 2 About PT01 Key Features Applications Specification 2 Getting started 2 1 Hardware amp Button Function description 2 2 Charging the power Buy SIM card Install SIM card 2 3 Switch on switch off Reset 3 How to 3 1 The
18. Set up the access point name of GPRS Formatl 803 user password APN eg 80340000 CMNET Format2 803 user password APN APN user name APN password Explanation Different GSM GPRS service associations provide different APN please according to local service providers to provide the APN to choose format 1 or 2 to use set Explanation2 When PTOI tracker receives the instruction and confirms the user password correctly updates the access point name to the new access point name After the success it will send the confirmation messages to the sender If sent the format 1 the content is SET GPRS APN OK if it is format 2 the content is SET GPRS ACCOUNT OK Note APN is CMNET after factory set or reset APN is characters composed of 3 to 35 letters numbers dots underscore _ and connectors APN user name and user password are respectively characters composed of from 3 to 20 the numbers and letters 4 Set up the TCP IP server and IP s address and port number Format 804 user password fixed IP address port eg 804 0000 119 146 223 203 8886 Explanation When PTO1 tracker receives the instruction and confirms the user password correctly updates the IP address and port number preserved in the module After the success it will send the confirmation messages to the sender The content is SET SERVER IP AND PORT OK 5 upload data in certain time when driving Format 805 user password sampling interva
19. TO1 you can find the a white label writes IMEI Terminal ID Terminal ID is cfce99c6fca898ef here Model PTO1 IMEI 357671030316639 Terminal ID cfce99c6fca898ef Click Submit and then you add the car successfully on the software 800d Tip Add Car Info Success Put a check mark on the device and right click you will see the menu as below picture Now you can track online 3 E demo 3 lt gt AL900 VA E PTos NIX oio Locate tn Track Replay Wk RecentLocation gt x Car Voice Monitor is Take photo Latest Photos XG Disable Oil Enable Oil Disable Power Enable Power Terminal reboot BE reeset soning Pow By 1000 Locate i Hs Set interval le e Set Alarm 3 2 1 Switch the mode instruction Page 24 of 35 PT01 USER MANUAL Format 710 user password 4 figures eg 7100000 Explanation When PTO1 tracker receives the SMS and confirms the user password correctly it switches to the GPRS application mode After the success it will send the confirmation messages SET MODE OK CURRENT MODE GPRS to the sender 3 2 2 Set up the user password instruction Format 777 new password 4 figures old password 4 figures eg 77712340000 Explanation Confirm the user password correctly changes the new user password to the old password After set successfully it will send the confirmation messages SET USER PASSWORD OK to the sender
20. der The content is CHANGE PASSWORD OK Note The user service password is 0000 after factory set or reset 3 2 8 Set up the access point name of GPRS Formatl 803 user password APN eg 803 0000 CMNET Format2 803 user password APN APN user name APN password Explanation Different GSM GPRS service associations provide different APN please according to local service providers to provide the APN to choose format 1 or 2 to use set Explanation2 When PTOI tracker receives the instruction and confirms the user password correctly updates the access point name to the new access point name After the success it will send Page 28 of 35 PT01 USER MANUAL the confirmation messages to the sender If sent the format 1 the content is SET GPRS APN OK if it is format 2 the content is SET GPRS ACCOUNT OK Note APN is CMNET after factory set or reset APN is characters composed of 3 to 35 letters numbers dots underscore _ and connectors APN user name and user password are respectively characters composed of from 3 to 20 the numbers and letters 3 2 9 Set up the TCP IP server and IP s address and port number Format 804 user password fixed IP address port eg 804 0000 222 125 12 32 80 Explanation When PTO1 tracker receives the instruction and confirms the user password correctly updates the IP address and port number preserved in the module After the success it will send the confirmation
21. e center the set radius parameters to determine the scope of the fence When open this feature once the PTO1 beyond the scope of the set fence it will send location information as to 3 2 10 to the server The information state item automatically updates STATE OS At the same time call the first user telephone number If it is unsuccessful closed or unable to connect or no response makes vibration and starts calling the second and the third in turn When the PTOI re enters the fenced area it will immediately send location information format 3 2 10 to the server The information state item prompts STATE RS At the same time call the first user telephone number If it is unsuccessful closed or unable to connect or no response makes vibration and starts calling the second and the third in turn 2 Set the scope of the fence According to the input formats different of coordinates user can choose the format as follows instructions to operate Format1 003 user password E Wdddmm mmmmN Sdd mmmmRzzz z eg 003xxxxE11406 0024N2233 4230R1 Explanation E east longitude W west longitude N north latitude S south latitude In this example uses E and N please according to the actual geographical position choose corresponding coordinate form to set In the demonstration meanings of various parts are as follows Edddmm mmmm is longitude information with units of degrees and minutes and the ddd expresses degree mm mmmm expresses minute
22. e confirmation messages SET GEO FENCE OK to the sender Note 1 Radius of the fence can not exceed the definition of its domain the value of the decimal part for zero must input zero fill For example R 1 it is important to enter into 1 0 2 If the calling state is off it will not call the user telephone number and only send messages to the present number 3 Degree and minute is divided into sexagesimal system converter that is 1d 60m 2 open the electronic fence 211 user password After set successfully it will send the confirmation messages GEO FENCE ON to the sender 3 close the electronic fence 210 user password After set successfully it will send the confirmation messages GEO FENCE OFF to the sender Page 33 of 35 PT01 USER MANUAL 3 2 18 Low voltage upload Explanation When the PTO1 s working voltage lower than the set it will do like 3 2 10 instruction the data state item automatically add LP to aid current status Send a total of three times each time one minute interval Note When low voltage different situation for below condition expression upload the call LPCALL Automatically answered LPANSWER Automatically upload LPAUTO Upload the emergency situation LPSOS 4 Instruction Set Instruction Explanation 700 user password SMS Mode 710 user password GPRS Mode 000 user password Close handset in two modes 001
23. es vibration and starts calling the second and the third in turn 2 2 Charge battery Before using PTO1 to lengthen the battery service life suggest in closes down under the condition to charge completely at least for 12 hours Note The DC port can only make the charge use Please do not meet other equipment If connects the initiation question arbitrarily is generally irresponsible Page 8 of 35 PT01 USER MANUAL Charger states indicate Red light is on it indicates that it is in charging Red light is slow flashing it indicates that charge completed Buy A SIM card Buy a SIM card from local service provider Please make sure that your SIM card support SMS function and have enough deposit Install SIM card Insert SIM card to PTO1 as the photo shows 2 3 switch on switch off Switch on When the device is on press the button to off side and wait for 3 seconds The green LED and Page 9 of 35 PT01 USER MANUAL blue LED are light When the device is off press the power button to on side and wait for about 20 seconds It will enter standby mode It is suggested that you stay an outer place where it can receive the better GPS signal when you turn on the device Switch off When the device is on press the button to off side and wait for 3 seconds When the LED goes out it indicates that the device is turning off for sure Tips How to get better GPS signal 1 working outdoor PTO1 can get
24. l T the number of upload data each time N eg 805 0000 60 1 Explanation The time T unit of the sampling is second 5 seconds at least 65535 seconds at most The number of upload data each time is N at least is 1 at most is 50 Sampling interval T and the number of upload data each time N product should meet greater than equal 60 that is T N gt 60 When setting parameters T N lt 60 the device will automatically correct sampling interval T to meet the uploading constraints When PTO1 tracker receives the instruction and confirms the user password correctly sends the confirmation messages to the sender The content is SET GPS SAMPLING TIME AND QUANTITY OK At the same time as specified in the instructions to the sampling interval time T continuous read the GPS data and preserve to the memory block When the memory block reaches to the number of upload each time N setting it starts connecting to the Page 22 of 35 PT01 USER MANUAL GPRS servers to send out the format as 4 2 10 information and the state item automatically updates STATE AUTO When the number of upload each time N 0 it will close the upload data setting and send the confirmation messages to the sender The content is GPRS TIMER STOP 6 Upload data in certain time when vehicle stopped Format 809 user password X Y eg 809 0000 60 1 Note the sampling time is X and the unit issecond the area is 10 59999 the number of
25. messages to the sender The content is SET SERVER IP AND PORT OK Note The IP s address and port number are0 0 0 0 0000 after factory set or reset 3 2 10 Upload the location instruction at once Format 806 user password eg 806 0000 Explanation When PTO1 tracker receives the instruction and confirms the user password correctly sends the confirmation messages to the sender The content is START GPRS UPLOAD At the same time send the data from the memory block to server and the state item automatically updates STATE SMS Upload format IMEI user name service password condition data quantity the base station s information GPRMC the base station s information 123456789000001 PT01 0000 SMS 3 25ee0dff GPRMC 083945 180 A 2233 4249 N 11406 0046 E 0 00 315 00 251207 A 6E 25ee0dff GPRMC 083950 180 A 2233 4249 N 11406 0046 E 0 00 315 00 251207 A 6E 25ee0dff GPRMC 083955 180 A 2233 4249 N 11406 0046 E 0 00 315 00 251207 A 6E Page 29 of 35 PT01 USER MANUAL Note Immediately upload data format for the state SMS 3 2 11 Upload data settings Format 805 user password sampling interval T the number of upload data each time N eg 805 0000 60 1 Explanation The time T unit of the sampling is second 5 seconds at least 65535 seconds at most The number of upload data each time is N at least is 1 at most is 50 sampling interval T and the number of upload data each time N
26. ming time xx is the gap time and sends the confirmation SMS to the sender s mobile phone TIMER START REPEAT INTERVAL lt X gt MINUTES Then start to time and send the format as 3 1 5 setting information when it arrives the gap time the information state item automatically updates STATE TIMER When xx 00 cancels the positional information in fixed time instruction and sends the confirmation SMS to the sender s mobile phone TIMER STOP Note The state set by this directive in the next boot after the shutdown is still valid once again Page 14 of 35 PT01 USER MANUAL received the directive could be changed again changes reset configuration reset After factory set or reset timing upload is stop 3 1 7 Calling switch instruction Calling OFF format 150 user password 4 figures eg 1500000 Calling ON format 151 user password 4 figures eg 1510000 Explanation When TLT 1B tracker receives the instruction to close calling and confirms the user password correctly close the calling function including the SOS alarm when across the fence after successfully sent the confirm information SET VOICE CALL OFF to the sender When TLT 1B receives instruction to open calling and confirm the user password correctly open the calling function including the SOS alarm when across the fence after successfully sent the confirm information SET VOICE CALL ON to the sender 3 1 8 Telephone localization functio
27. n Explanation One of 3 telephone numbers stored in advance calls in and hangs up after ringing 2 5 times then the PTO1 will send the location information to this number such as 3 1 5 to this number the information state item automatically updates STATE CALL But other incoming numbers will automatically hang up 3 1 9 Answer or hang up function initiative answer automatic answer and hang up Explanation One of 3 telephone numbers stored in advance calls in you can press shortly the SOS key or power key to answer or hung up and automatically answers after rings 10 seconds Users can terminate the call by press shortly power key to hanging up After the call the PTO1 will send the location information format as 3 1 5 to this calling number the information state item automatically updates STATE ANSWER But other incoming numbers will automatically hang up 3 1 10 Seeking help initiatively When press the key more than 3 seconds it will make vibration and send the location Page 15 of 35 PT01 USER MANUAL information such as 3 1 5 to 3 telephone numbers stored in advance the information state item automatically updates STATE SOS At the same time call the first user telephone number If it is unsuccessful closed or unable to connect or no response makes vibration and starts calling the second and the third in turn Note If the calling state is off it will not call the user telephone number and only send messages to the
28. pen calling and confirm the user password correctly open the calling function including the SOS alarm when across the fence after successfully sent the confirm information SET VOICE CALL ON to the sender Page 30 of 35 PT01 USER MANUAL 3 2 13 Upload the call Explanation One of 3 telephone numbers stored in advance calls in hangs up after ringing 2 5 times Dispose as 3 2 10 the state item automatically updates STATE CALL 3 2 14 Answer or hang up function initiative answer automatic answer and hang up Explanation One of 3 telephone numbers stored in advance calls in you can press shortly the SOS key or power key to answer or hung up and automatically answers after rings 10 seconds Users can terminate the call by press shortly power key to hanging up After the call the PTO1 will send the location information format as 3 2 10 to the server the information state item automatically updates STATE ANSWER But other incoming numbers will automatically hang up 3 2 15 Upload the emergency case Explanation When press the SOS key more than 3 seconds it will do like 3 2 10 instruction the information state item automatically updates STATE SOS At the same time it will make vibration and call the first preset user telephone number If it is unsuccessful closed or unable to connect or no response makes vibration again and starts calling the second and the third in turn Note If the calling state is off it will not call
29. present number 3 1 11 Monitor function Handset silent switch Format 00X user password 4 figures eg 0000000 Explanation When the tracker receives this instruction and confirms the user password correctly according to X s value set state of the handset switch X 1 handset closed for the monitoring mode After set successfully it will send the confirmation messages SET PROFILE OK CURRENT PROFILE SILENT to the sender After handset closes if the user phone number stored in advance calls in the tracker will not have any prompt After the approximately 10 seconds later automatic answering the user may hear the tracker end the sound but the tracker end will not hear the user X 0 open the handset After set successfully it will send the confirmation messages SET PROFILE OK CURRENT PROFILE NORMAL to the sender After handset opens if the user phone number stored in advance calls in the tracker will prompt After the approximately 10 seconds later the two sides can make calls After the call the PTO1 will send the location information format as 3 1 5 to this calling number the information state item automatically updates STATE ANSWER But other incoming numbers will automatically hang up Note After factory set or reset the state is open Non monitoring state 3 1 12 Electronic fence function Electronic fence takes the set coordinates as the center the set radius parameters to determine the scope of the fence When open
30. ress and port number in GPRS mode 805 user password sampling interval T the number of upload data each time N Upload data set in GPRS mode Upload the current position immediately in GPRS 806 user password mde GTAN user password Read all the current numbers passwords GTAS user password Read current settings Page 35 of 35
31. s SET GEO FENCE OK to the sender Note 1 Radius of the fence can not exceed the definition of its domain the value of the decimal part for zero must input zero fill For example R 1 it is important to enter into 1 0 2 If the calling state is off it will not call the user telephone number and only send messages to the present number 3 Degree and minute is divided into sexagesimal system converter that is 1d 60m 2 open the electronic fence 211 user password After set successfully it will send the confirmation messages GEO FENCE ON to the sender 3 close the electronic fence 210 user password After set successfully it will send the confirmation messages GEO FENCE OFF to the sender 3 1 13 Low voltage warning When the PT01 s working voltage lower than the set to read the GPS information whether or not effective immediately send the format as 3 1 5 location information to the three stored numbers the information state item automatically updates STATE LP Send a total of three times each time one minute interval 3 1 14 Display the location on map 1 Download Google earth software from http earth google com 2 Start the Google earth software For more information about Google earth software please refer tohttp earth google com As following picture shows Page 18 of 35 PT01 USER MANUAL CO 3 22 3p crsentta sone O Ein 3 oe tte stove O H nnum so D GI n pamu soyt O 2
32. the user password instruction Format 777 new password 4 figures old password 4 figures eg 77712340000 Explanation Confirm the user password correctly changes the new user password to the old password After set successfully it will send the confirmation messages SET USER PASSWORD OK to the sender Note The user password can only be 4 figures The default setting for 0000 3 1 3 Change the telephone number in advance instructions Format new numbers with 4 20 figures user password 4 figures location number 1 3 eg 13900000000 0000 1 Page 11 of 35 PT01 USER MANUAL Explanation You can store 3 telephone numbers at most in advance When PTOI tracker receives the instruction and confirms the user password correctly substitutes the new number for the existing number After success it will send the confirmation messages SET USER NUMBER 1 3 OK to the sender Note The preset numbers are empty after factory set or reset 3 1 4 GPS state setting instruction GPS will enable on the on off adaptive three work states by send text messages command GPS state is open after factory settings or reset 3 1 4 1 Open the GPS instruction Format 222 user password 4 figures eg 2220000 Explanation When PTOI tracker receives the instruction and confirms the user password correctly opens the GPS power After the success it will send the confirmation messages GPS ON OK to the sender 3 1 4 2 Close GPS ins
33. the user telephone number and only send messages to the server 3 2 16 Monitor function Handset silent switch Format 00X user password 4 figures eg 0000000 Explanation When the tracker receives this instruction and confirms the user password correctly according to X s value set state of the handset switch X 1 handset closed for the monitoring mode After set successfully it will send the confirmation messages SET PROFILE OK CURRENT PROFILE SILENT to the sender After handset closes if the user phone number stored in advance calls in the tracker will not have any prompt After the approximately 10 seconds later automatic answering the user may hear the tracker end the sound but the tracker end will not hear the user X 0 open the handset After set successfully it will send the confirmation messages SET PROFILE OK CURRENT PROFILE NORMAL to the sender After handset opens if the Page 31 of 35 PT01 USER MANUAL user phone number stored in advance calls in the tracker will prompt After the approximately 10 seconds later the two sides can make calls After the call the PTO1 will send the location information format as 3 2 10 to the server the information state item automatically updates STATE CALL But other incoming numbers will automatically hang up Note After factory set or reset the state is open Non monitoring state 3 2 17 Electronic fence function Electronic fence takes the set coordinates as th
34. truction Format 333 user password 4 figures eg 3330000 Explanation When PTO1 tracker receives the instruction and confirms the user password correctly close the GPS After the success it will send the confirmation messages GPS OFF OK to the sender 3 1 4 3 Adaptive GPS instruction Power saving Function Format 100 user password 4 figures eg 1000000 Explanation When PTO1 tracker receives the instruction and confirms the user password correctly it will close the GPS immediately and send the confirmation messages VIBRATION SENSOR ON OK to the sender The tracker built in vibration sensor once monitors the track movement for change to open the GPS If in 5 minutes with not monitors the track changed in the Page 12 of 35 PT01 USER MANUAL movement to close GPS Note When using this function as far as possible put the tracker in the vibration sensitive areas such as the car at the front or rear If a long time on the highway or the flat road the GPS may be in sleeping and will not be awakened Users can send 222 user passwords to re open the GPS 3 1 5 Single localization request instruction Format 666 user password 4 figures eg 6660000 Explanation When PTO1 tracker receives the instruction and confirms the user password correctly reads the GPS information No matter whether effective the information with the replying base station which is the set of the original software will be sent to the sender
35. up function 3 2 15 Upload the emergency case 3 2 16 Monitor function Handset silent switch 3 2 17 Electronic fence function 3 2 18 Low voltage upload 4 Instruction Set Page 4 of 35 PT01 USER MANUAL 1 Introduction 1 1 What s in the box e PTOI e USB charged cable e Charger or car charger e Accessory CD 1 2 About PT01 PTO1 Handheld Tracker is a personal remote positioning device with built in GPS and GSM GPRS technology in compact size It can transmit the longitude and latitude coordinates to your cell phone by the SMS By this you can find its location on the Google maps or other map software The tracker uploads positioning data through GPRS to a designated server The user can look for real time location tracking historical trajectory through the Internet These features are for protecting and searching children and elders Furthermore it can be used for other security purposes such as asset protection and animal tracking Key Features e Built in SIRF Starll Chipset excellent for fixing the position even at a weak signal status Work well even in areas with limited sky view like urban canyons e Built in GSM GPRS module support 4 frequency GSM 850 900 1800 1900 MHz working all over the world e Support voice call e Support SMS communication or GPRS TCP connection e Get the position information via mobile phone SMS or examine the path on the Internet e The available SMS takes the control command change

GPS Personal Tracker

Contents

Download Pdf Manuals

Related Search

Related Contents