User Manual - Affordable Scales & Balances
Contents
1. Used to activate tare function and to clear tare entry Used to weigh unstable things livestock liquid etc or used to store the set value in SET mode Used to check the current AD value and the voltage of battery in TEST mode WARNING Do not press the keys with excessive force the keys are be pressed with a soft touch BATTERY USAGE m Open the battery lid located in back of the scale and turn main switch off m Separate the battery connector and take out the discharged battery m Puta charged battery in rear and connect the battery connector Turn main power switch on and cover the battery lid BATTERY CONNECTOP BATTERY BOLT FIG 1 CLOSE STATE FIG 2 OPEN STATE USE OF BATTERY CHARGER m Check the voltage of battery charger before use It is fixed to 220V before shipping m Insert charger A C cord into the power source and connect the discharged battery to the connector m Turn ON the switch on the battery charger charging will start wiht RED lamp CHARGE turn on m When the charging is completed GREEN lamp FULL turns on m Estimated time for charging is 15 hours Charging time can be varying according to the battery condition FUNCTIONS amp DESCRIPTIONS m Press the ON key located in real panel of the scale While the power is off the ON OFF key on the remote control wouldn t2. Place the scale on firm and temperature consistent environment Keep the scale away from other electromagnetic generating devices This may interfere with accurate reading WARNING The load which hang on the hook should be a vertical load Refer to the next features A LOAD LOAD m The load which hang on the hook should be a vertical load LIFT EYE LOW DISPLAY BATTERY LAMP LOAD HOUSING SPECIHCATIONS MAX TARE WEIGHT DISPLAY KEYBOARD FULL TARE L E D 1 5 inch OPERATION TEMPERATURE 10 40 C POWER SOURCE DC 12V Rechargeble Battery AC Adaptor POWER CONSUMPTION 1 2 2 4W DISPLAY LAMP ZERO TARE HOLD LOW BATTERY LAMP CASTONIT CAS MAX eon CAPACITY e d 2kg SO00Xeke EEE ZERO E es O O Y Y ma DISPLAY WEIGHT DISPLAY Displays weight or messages 5 Digit ZERO LAMP Indicates that scale is stable and at zero NET LAMP Indicates that scale is currently using a tare HOLD LAMP Indicates that the HOLD function is activated LOW BATTERY LAMP Indicates that voltage of battery low and should be changed soon mw KEY FUNCTIONS FUNCTIONS Used to turn the scale ON OFF or used to released from TEST SET mode Used to reset the scale zero
3. Exclusive OR value In the case of Japan RF module Dummy Code is transmitted additionally before this weight format data Dummy Code Hex 55 55 55 55 55 55 55 55 55 55 55 a6 12 e0 14byte Dummy Code is an typical character of codule Status BIT D1 CONTENTS Stable ACTIVE Stable m 06 Gloss m 03 Display Period No decimal point 1 place of decimal point 2nd place of decimal point 3 place of decimal point 4th place of decimal point m l error is occurred then the scale transmit error code as below Error table BIT D7 D6 D3 D2 D1 DO Description Over Memory Bt2 Battery Zero Load Calib Cell ration Product No ID amp Counter These modes are common in all kinds of module in the scale Choosing ID mode or Count Mode is done in Set Mode m Product No ID Product No ID is allowed to input in 4 digit If BCC is correct then the scale transmit ACK 06H otherwise it sends NAK 15H BCC Exclusive OR value from ID 1 to 4 ID Format 6 Bytes Data Transfer ENQ ID1 Example 05H 0 m Counter It shows the number of times of counted weight When the weight goes to Okg and the weight is stable then counter is increasing When the power turns on the number of count is initialized as zero Time Setting Command m ENQ Y 05h 79h Time Data SPECC CONTENT Data
4. Transfer Time Set Format 15 bytes Example m Number Each number is transmitted in ASCII type string m If BCC is correct then the scale transmit ACK 06H otherwise it sends NAK 15H m BCC Exclusive OR value from y to S2 Operator should input the value Time Data Demand Command m ENQ Y 05h 59h Time Data Data Transfer Time Demand Format 14 bytes Example m Number Each number is transmitted in ASCII type string m BCC Exclusive OR value from Y1 to S2 OPTIONS Fig 1 TW 100 Frequency Please refer to handy terminal TW 100 B manual of CASTON B Crane Scale Bluetooth Type Fig 2 Charger 1 TW 100 Specification 2400 2483 5 MHz Channel interval 1 Mhz Channel 78 channel Communication Type GFSK Gaussina Frequency Shift Keying Communication Speed 9600 Actual Communication Distance Maximum Approximately 50 100M Display LCD 5 digit Size of letter 12 mm Height Display below zero lt displayed Battery life time Approx 6 hours Battery charging time Approx 3 5 hours Power TW 100 Rechargeable DC Battery7 2V750mA Charger AC220V 60Hz Power consumption 0 43 0 72 W Temperature range 10 400 Function Printer interface zero tare hold print ID setti
5. Crane Scale C A STO N i OWNER S MANUAL BT Ver 9007 CT3 BT33 0 2006 07 Tum power switch off on rear panel when you don t use the scale for alongtime Do not disassemble the scale When any damage or defect occurs contact your CAS authorized E NS dealer immediately for proper repair Scale must be grounded to minimize electricity static This will minimize defect or electric shock Do not pull the plug by its cord when unplugging Damaged cord could cause electric shock or fire To prevent from fire occurring Do not place or use the scale near flammable or corrosive To reduce electric shock or incorrect reading Do not spill water on the scale or place it in humid condition Avoid placing the scale near heater or in direct sunlight Y Use proper Adapter Incorrect adapter could damage the scale Insert plug firmly to wall outlet to prevent electric shock Do not stand under the scale while weighing the load and you should be careful to provide against a safety accident 10 install safety pin in hook should be fixed to prevent dropping out fromlift eye bolt ZN Attention For consistent and accurate reading maintain periodical check by your CAS authorized dealer Avoid sudden shock to the scale Internal mechanism could be damaged Take the battery out when scale is not in use for long time Leakage from the batteries is hazardous
6. ON MODE DEFAULT FUNCTION RANGE DESCRIPTION VALUE CASTON BT have 6 communication modes RS 232C RF Bluetooth 1 channel and Bluetooth 2 channel equipped with product NO function or counter function Speed control of weight 1 fast 23 slow Zero operation time set 0 5 2 3 sec Step 0 2 0 4 5 digit Step 0 5 m F8 Communication type ID Number 0 232 RF 1 BT1 2 BT2 Counter 4 232 RF 5 BT1 6 BT2 Automatic zero range set 0 5 1 5 sec Step 0 1 0 4 5 digit Step 0 5 Stable interval set Stable range set Hold type set 0 Average 1 Peak 1 Off Producct ID can be stored LED display On Off O ONV Or ala Functions of CASTON can be controlled by PC command such as reading weight data time and etc Weight Backup 1 Backup Bluetooth 1 Module Communication Type Bluetooth 2 Module Product No BT1 Print Output m Available module combination Adjustable in function set F8 Bluetooth 1 module F8 1 5 CASTON B PC 232C BT Module CASTON TW 100 1set PC RS 232C m Bluetooth 2 module F8 2 6 Bluetooth 1 module F8 1 5 1 Type CASTON jj TW 100 B 2set PC RS 232 2 Function CASTON jj B PC 232C BT Module 2 Functions of CASTON yj can be controlled by PC command such 2 Function as reading weight data time and sending product ID weight dat
7. a time and etc m RS 222C RF module F8 0 4 RS 232C RF module F8 0 4 1 Type CASTON 11 PC RS 232C RF module Command protocol ASCLL CODE 05h 57h Weight Data Command Display 05h 47h Gross Data Demand same as W command format 05h 4eh Net Data Demand same as W command format Zero set 05h Sah gt 05h 54h Tare set gt 05h 46h Display On Off toggle 05h 45h Error Clear gt 05h 48h Hold On Off toggle gt 05h 53h Sum accumulate the current weight data when the scale received this command gt 05h 43h Sum Clear gt 05h 44h Sum Weight Data Demand same as W command format gt 05h 50h Print It uses the TW 100 and it prints Print CASTON sends a data with the printer rightly gt 05h 70h 05h 79h Time set Asking for time data gt 05h 59h gt 05h 56h BAUDRATE m Bluetooth Module m RF Japan Module Asking for battery voltage 9600bps 1200bps DATA FORMAT The scale will reply to W G N D Command in below data format Weight Format 14 Bytes Data Transfer Example 1 Number Each number is travsmitted in ASCII type string 2 COM or D or G or N Command Char 3 ID Product No 4 W Weight Data 5 BCC From COM to STA
8. error message Er 03 An error which can be removed by deleting error message command V Er 01 Er 05 Er 06 Er 07 Removal of Error Message Deleting error message command is works when On Off key is pressed or error delete command in command mode from PC MEMO MEMO
9. ll display and then the scale return to normal weighing mode TEST MODE Press key for 1 second after power on then the scale enter into TEST mode m Key Usage Used to display the AD value and the voltage of battery 1 A D value Display 2 Voltage of battery KEY Other KEY Used reyurn the normal weighing mode m Voltage of battery indication It will display the current voltage down to two places of decimals It will display battery error Er 04 when the voltage of battery is under 10 8V The scale is automatically power off when the voltage of battery is under 10 5V MODE Communication Type Bluetooth 1 Module Count Bluetooth 2 Module Press TARE key and press ON key while TARE key is pressed then BT1 Print Output you can enter into SET mode Command Mode m Key Usage ZERO KEY Used to increase the input value TARE KEY Used to decrease the input value Command Mode Type Stream about 1 sec period Stable Used to memorize the input value gt 1 F1 2 is not showed in SET mode of RF type zero operation time is set HOLD KEY When you press HOLD key for 1 second after saving the input value always as sec 2 Command mode in F9 is always works regardless of RF mode or Used to move the next menu without saving the input value Bluetooth mode e 70 3 243 ZE When you press ON OFF key for 1 second then you can go to the next mode a seine Men COMIMUNICATI
10. ng weight sum peak hold UNIT mm MAX CAPA DIVISION WEIGHT JOTON 50 TON UNIT mm MODEL MAX CAPA DIVISION G WEIGHT ERROR MESSAGE ovEr m Contents Above the maximum allowable weight reading m Remark Check weighed material Er 01 m Contents Calibration problem m Remark Perform Calibration Er 02 m Contents Load cell connection failure or error in A D conversion part m Remark Check L C connection amp test A D conversion test Er 03 m Contents Zero value exceed 10 amp of zero range m Remark Check conditions of L C and Hook Er 04 m Contents Warning of low voltage of battery Approximately under 10 8V m Remark If below 10 4V caston is shut down Er 05 m Contents Error in bluetooth module 1 m Remark Check condition of BT1 Er 06 m Contents Error in bluetooth module 2 m Remark Check condition of BT2 Er 07 m Contents Failure in internal memory m Remark Whole configuration is necessary An error which is not removed before clearing the cause of the error ovEr Er 02 Er 04 Zero value exceed 10 amp of zero range An error which will be removed automatically after showing
11. operate m Press ON OFF key for 0 5 second mLED display will be on and then it will show from 00000 to 99999 continuously In the case of BlueTooth model the LED display will show up the above message after checking wireless connections between the scale and the remote contoller 2 OFF m Press ON OFF key for 2 seconds m LED display will show off message and then power turns off 3 ZERO FUNCTION m Used to correct drifted zero nalue when the scale is unloaded motion is not detected You can adjust the zero up to 10 of the maximum capacity m The function does not work when weight is fluctuated ort unstable 4 TARE FUNCTION m Use tare function after removing the weighing material from container being used m The function does not work when weight is fluctuated ort unstable m The weight including TARE weight can t exceed the maximum capacity 5 HOLD FUNCTION There are tow HOLD functions Average Hold function Peak Hold function m Average Hold Press the HOLD key while weighing an unstable item hold will display and then HOLD lamp is on The averaged value of the weight fluctuation will be displayed after few seconds m Peak Hold Press the HOLD key while weighing an unstable item hold will display and then peak value of the weight will be updated continuously until HOLD function is released m Release of Hold Functions Press the HOLD key while HOLD functions are activated hdoFF wi
Download Pdf Manuals
Related Search