Pyramid M-1000 Electric Time Stamp User Manual
Contents
1. i f i a inne g N TIME CLOCK WORLD 888 534 5994 Py r4ymid M 1000 USER MANUAL Model 1000 Instructional Sheet You have purchased a modern system for measuring your most important resource time With proper care the digital time recorder will give you many years of service TO SET TIME 1 Insert coin in screw on top of recorder and disengage by turning screw counter clockwise Lift and remove cover 2 NO NOT touch wheels with fingers To set hour place a pencil or other pointed object into one of the slots molded in the side of white wheel Rotate as shown on orange label until desired hour is beside red mark on metal frame Set minutes in same manner NOTE Wheels turn easily in the proper direction Do not force in the wrong direction 3 Plug recorder into a 115 volt 60 hertz outlet Recorder operates dependable from 32 to 120 F 0 to 43 C 4 Replace cover on recorder so that the hour an minute show through windows and secure by turning screw in clockwise direction TO RECORD TIME 1 Place time card or document on recording plate located on left side of machine 2 Insert right hand edge to stop and slide card or document until arrow on side of cover lines up with space or Space you wish to print 3 Depress recorder cover where press is located and release Do not hold in depressed position TO RE INK Your time recorder comes pre inked and should print 20 000 to 50 000 impressions befor2. e re inking becomes necessary When re inking use P N 1000 INK only WARNING OTHER INKS MAY MAKE THE RECORDER INOPERABLE AND VOID THE WARRANTY 1 Remove cover see TO SET TIME paragraph 1 2 Apply a small drop of 1000 INK black to each raised numeral on time wheel Index wheel as in TO SET TIME Paragraph2 Avoid over inking and getting ink on read bands 3 Replace cover as in TO SET TIME paragraph 2 and allow recorder to sit overnight and it will be ready for use the next day P N 1000 INK is available in most office supply stores Limited Warranty The manufacturer warrants this equipment to the original user against defective material or workmanship for a period of 1 year from the date of purchase The manufacturer s responsibility under this warranty is limited to the repair or replacement of the defective part or parts The manufacturer reserves the right to determine whether the parts failed because of defective material workmanship or other causes Failure caused by accident alteration misuse or improper packaging of returned unit is not covered by this warranty All warranty repairs must be done by Pyramid Technologies LLC Any repair to the equipment other than by PTI voids the warranty The rights under this warranty are limited to the original user and may not be transferred to subsequent owners Copyright 2000 Pyramid Technologies LLC 2002
Download Pdf Manuals
Related Search